sc16is7xx: use kworker for RS-485 configuration
RS-485 configuration is also done under the spinlock
so no blocking I/O allowed.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 86a679a..9e65760 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -303,6 +303,7 @@
#define SC16IS7XX_RECONF_MD (1 << 0)
#define SC16IS7XX_RECONF_IER (1 << 1)
+#define SC16IS7XX_RECONF_RS485 (1 << 2)
struct sc16is7xx_one_config {
unsigned int flags;
@@ -668,6 +669,26 @@
sc16is7xx_handle_tx(port);
}
+static void sc16is7xx_reconf_rs485(struct uart_port *port)
+{
+ const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
+ SC16IS7XX_EFCR_RTS_INVERT_BIT;
+ u32 efcr = 0;
+ struct serial_rs485 *rs485 = &port->rs485;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&port->lock, irqflags);
+ if (rs485->flags & SER_RS485_ENABLED) {
+ efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT;
+
+ if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
+ }
+ spin_unlock_irqrestore(&port->lock, irqflags);
+
+ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
+}
+
static void sc16is7xx_reg_proc(struct kthread_work *ws)
{
struct sc16is7xx_one *one = to_sc16is7xx_one(ws, reg_work);
@@ -688,6 +709,9 @@
if (config.flags & SC16IS7XX_RECONF_IER)
sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG,
config.ier_clear, 0);
+
+ if (config.flags & SC16IS7XX_RECONF_RS485)
+ sc16is7xx_reconf_rs485(&one->port);
}
static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit)
@@ -845,9 +869,8 @@
static int sc16is7xx_config_rs485(struct uart_port *port,
struct serial_rs485 *rs485)
{
- const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
- SC16IS7XX_EFCR_RTS_INVERT_BIT;
- u32 efcr = 0;
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
if (rs485->flags & SER_RS485_ENABLED) {
bool rts_during_rx, rts_during_tx;
@@ -855,13 +878,7 @@
rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND;
rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND;
- efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT;
-
- if (!rts_during_rx && rts_during_tx)
- /* default */;
- else if (rts_during_rx && !rts_during_tx)
- efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
- else
+ if (rts_during_rx == rts_during_tx)
dev_err(port->dev,
"unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n",
rts_during_tx, rts_during_rx);
@@ -875,9 +892,9 @@
return -EINVAL;
}
- sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
-
port->rs485 = *rs485;
+ one->config.flags |= SC16IS7XX_RECONF_RS485;
+ queue_kthread_work(&s->kworker, &one->reg_work);
return 0;
}