[netdrvr] netxen: checkpatch fixes (98% trim trailing whitespace)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 2815689..1c852a7 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -75,7 +75,7 @@
return 0;
}
-/*
+/*
* netxen_niu_gbe_phy_read - read a register from the GbE PHY via
* mii management interface.
*
@@ -88,7 +88,7 @@
* -1 on error
*
*/
-int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
+int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
__u32 * readval)
{
long timeout = 0;
@@ -171,7 +171,7 @@
return result;
}
-/*
+/*
* netxen_niu_gbe_phy_write - write a register to the GbE PHY via
* mii management interface.
*
@@ -184,7 +184,7 @@
* -1 on error
*
*/
-int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
+int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
__u32 val)
{
long timeout = 0;
@@ -275,7 +275,7 @@
netxen_set_phy_int_speed_changed(enable);
if (0 !=
- netxen_niu_gbe_phy_write(adapter,
+ netxen_niu_gbe_phy_write(adapter,
NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE,
enable))
result = -EIO;
@@ -312,7 +312,7 @@
{
int result = 0;
if (0 !=
- netxen_niu_gbe_phy_write(adapter,
+ netxen_niu_gbe_phy_write(adapter,
NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
-EIO))
result = -EIO;
@@ -320,7 +320,7 @@
return result;
}
-/*
+/*
* netxen_niu_gbe_set_mii_mode- Set 10/100 Mbit Mode for GbE MAC
*
*/
@@ -344,9 +344,9 @@
NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
if (enable) {
- /*
- * Do NOT enable flow control until a suitable solution for
- * shutting down pause frames is found.
+ /*
+ * Do NOT enable flow control until a suitable solution for
+ * shutting down pause frames is found.
*/
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_GB_MAC_CONFIG_0(port),
@@ -359,7 +359,7 @@
printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
}
-/*
+/*
* netxen_niu_gbe_set_gmii_mode- Set GbE Mode for GbE MAC
*/
static void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter,
@@ -382,9 +382,9 @@
NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
if (enable) {
- /*
- * Do NOT enable flow control until a suitable solution for
- * shutting down pause frames is found.
+ /*
+ * Do NOT enable flow control until a suitable solution for
+ * shutting down pause frames is found.
*/
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_GB_MAC_CONFIG_0(port),
@@ -467,7 +467,7 @@
}
#if 0
-/*
+/*
* netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts
* @param enable 0 means don't enable the port
* 1 means enable (or re-enable) the port
@@ -623,7 +623,7 @@
(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
return -2;
- netxen_niu_macaddr_get(adapter,
+ netxen_niu_macaddr_get(adapter,
(netxen_ethernet_macaddr_t *) mac_addr);
if (memcmp(mac_addr, addr, 6) == 0)
break;
@@ -753,7 +753,7 @@
}
/* Set promiscuous mode for a GbE interface */
-int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
+int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode)
{
__u32 reg;