| /* |
| * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. |
| * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <rdma/ib_mad.h> |
| #include <rdma/ib_user_verbs.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/utsname.h> |
| #include <linux/rculist.h> |
| |
| #include "ipath_kernel.h" |
| #include "ipath_verbs.h" |
| #include "ipath_common.h" |
| |
| static unsigned int ib_ipath_qp_table_size = 251; |
| module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO); |
| MODULE_PARM_DESC(qp_table_size, "QP table size"); |
| |
| unsigned int ib_ipath_lkey_table_size = 12; |
| module_param_named(lkey_table_size, ib_ipath_lkey_table_size, uint, |
| S_IRUGO); |
| MODULE_PARM_DESC(lkey_table_size, |
| "LKEY table size in bits (2^n, 1 <= n <= 23)"); |
| |
| static unsigned int ib_ipath_max_pds = 0xFFFF; |
| module_param_named(max_pds, ib_ipath_max_pds, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_pds, |
| "Maximum number of protection domains to support"); |
| |
| static unsigned int ib_ipath_max_ahs = 0xFFFF; |
| module_param_named(max_ahs, ib_ipath_max_ahs, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support"); |
| |
| unsigned int ib_ipath_max_cqes = 0x2FFFF; |
| module_param_named(max_cqes, ib_ipath_max_cqes, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_cqes, |
| "Maximum number of completion queue entries to support"); |
| |
| unsigned int ib_ipath_max_cqs = 0x1FFFF; |
| module_param_named(max_cqs, ib_ipath_max_cqs, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support"); |
| |
| unsigned int ib_ipath_max_qp_wrs = 0x3FFF; |
| module_param_named(max_qp_wrs, ib_ipath_max_qp_wrs, uint, |
| S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support"); |
| |
| unsigned int ib_ipath_max_qps = 16384; |
| module_param_named(max_qps, ib_ipath_max_qps, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support"); |
| |
| unsigned int ib_ipath_max_sges = 0x60; |
| module_param_named(max_sges, ib_ipath_max_sges, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support"); |
| |
| unsigned int ib_ipath_max_mcast_grps = 16384; |
| module_param_named(max_mcast_grps, ib_ipath_max_mcast_grps, uint, |
| S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_mcast_grps, |
| "Maximum number of multicast groups to support"); |
| |
| unsigned int ib_ipath_max_mcast_qp_attached = 16; |
| module_param_named(max_mcast_qp_attached, ib_ipath_max_mcast_qp_attached, |
| uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_mcast_qp_attached, |
| "Maximum number of attached QPs to support"); |
| |
| unsigned int ib_ipath_max_srqs = 1024; |
| module_param_named(max_srqs, ib_ipath_max_srqs, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support"); |
| |
| unsigned int ib_ipath_max_srq_sges = 128; |
| module_param_named(max_srq_sges, ib_ipath_max_srq_sges, |
| uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support"); |
| |
| unsigned int ib_ipath_max_srq_wrs = 0x1FFFF; |
| module_param_named(max_srq_wrs, ib_ipath_max_srq_wrs, |
| uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support"); |
| |
| static unsigned int ib_ipath_disable_sma; |
| module_param_named(disable_sma, ib_ipath_disable_sma, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(disable_sma, "Disable the SMA"); |
| |
| /* |
| * Note that it is OK to post send work requests in the SQE and ERR |
| * states; ipath_do_send() will process them and generate error |
| * completions as per IB 1.2 C10-96. |
| */ |
| const int ib_ipath_state_ops[IB_QPS_ERR + 1] = { |
| [IB_QPS_RESET] = 0, |
| [IB_QPS_INIT] = IPATH_POST_RECV_OK, |
| [IB_QPS_RTR] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK, |
| [IB_QPS_RTS] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK | |
| IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK | |
| IPATH_PROCESS_NEXT_SEND_OK, |
| [IB_QPS_SQD] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK | |
| IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK, |
| [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK | |
| IPATH_POST_SEND_OK | IPATH_FLUSH_SEND, |
| [IB_QPS_ERR] = IPATH_POST_RECV_OK | IPATH_FLUSH_RECV | |
| IPATH_POST_SEND_OK | IPATH_FLUSH_SEND, |
| }; |
| |
| struct ipath_ucontext { |
| struct ib_ucontext ibucontext; |
| }; |
| |
| static inline struct ipath_ucontext *to_iucontext(struct ib_ucontext |
| *ibucontext) |
| { |
| return container_of(ibucontext, struct ipath_ucontext, ibucontext); |
| } |
| |
| /* |
| * Translate ib_wr_opcode into ib_wc_opcode. |
| */ |
| const enum ib_wc_opcode ib_ipath_wc_opcode[] = { |
| [IB_WR_RDMA_WRITE] = IB_WC_RDMA_WRITE, |
| [IB_WR_RDMA_WRITE_WITH_IMM] = IB_WC_RDMA_WRITE, |
| [IB_WR_SEND] = IB_WC_SEND, |
| [IB_WR_SEND_WITH_IMM] = IB_WC_SEND, |
| [IB_WR_RDMA_READ] = IB_WC_RDMA_READ, |
| [IB_WR_ATOMIC_CMP_AND_SWP] = IB_WC_COMP_SWAP, |
| [IB_WR_ATOMIC_FETCH_AND_ADD] = IB_WC_FETCH_ADD |
| }; |
| |
| /* |
| * System image GUID. |
| */ |
| static __be64 sys_image_guid; |
| |
| /** |
| * ipath_copy_sge - copy data to SGE memory |
| * @ss: the SGE state |
| * @data: the data to copy |
| * @length: the length of the data |
| */ |
| void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length) |
| { |
| struct ipath_sge *sge = &ss->sge; |
| |
| while (length) { |
| u32 len = sge->length; |
| |
| if (len > length) |
| len = length; |
| if (len > sge->sge_length) |
| len = sge->sge_length; |
| BUG_ON(len == 0); |
| memcpy(sge->vaddr, data, len); |
| sge->vaddr += len; |
| sge->length -= len; |
| sge->sge_length -= len; |
| if (sge->sge_length == 0) { |
| if (--ss->num_sge) |
| *sge = *ss->sg_list++; |
| } else if (sge->length == 0 && sge->mr != NULL) { |
| if (++sge->n >= IPATH_SEGSZ) { |
| if (++sge->m >= sge->mr->mapsz) |
| break; |
| sge->n = 0; |
| } |
| sge->vaddr = |
| sge->mr->map[sge->m]->segs[sge->n].vaddr; |
| sge->length = |
| sge->mr->map[sge->m]->segs[sge->n].length; |
| } |
| data += len; |
| length -= len; |
| } |
| } |
| |
| /** |
| * ipath_skip_sge - skip over SGE memory - XXX almost dup of prev func |
| * @ss: the SGE state |
| * @length: the number of bytes to skip |
| */ |
| void ipath_skip_sge(struct ipath_sge_state *ss, u32 length) |
| { |
| struct ipath_sge *sge = &ss->sge; |
| |
| while (length) { |
| u32 len = sge->length; |
| |
| if (len > length) |
| len = length; |
| if (len > sge->sge_length) |
| len = sge->sge_length; |
| BUG_ON(len == 0); |
| sge->vaddr += len; |
| sge->length -= len; |
| sge->sge_length -= len; |
| if (sge->sge_length == 0) { |
| if (--ss->num_sge) |
| *sge = *ss->sg_list++; |
| } else if (sge->length == 0 && sge->mr != NULL) { |
| if (++sge->n >= IPATH_SEGSZ) { |
| if (++sge->m >= sge->mr->mapsz) |
| break; |
| sge->n = 0; |
| } |
| sge->vaddr = |
| sge->mr->map[sge->m]->segs[sge->n].vaddr; |
| sge->length = |
| sge->mr->map[sge->m]->segs[sge->n].length; |
| } |
| length -= len; |
| } |
| } |
| |
| /* |
| * Count the number of DMA descriptors needed to send length bytes of data. |
| * Don't modify the ipath_sge_state to get the count. |
| * Return zero if any of the segments is not aligned. |
| */ |
| static u32 ipath_count_sge(struct ipath_sge_state *ss, u32 length) |
| { |
| struct ipath_sge *sg_list = ss->sg_list; |
| struct ipath_sge sge = ss->sge; |
| u8 num_sge = ss->num_sge; |
| u32 ndesc = 1; /* count the header */ |
| |
| while (length) { |
| u32 len = sge.length; |
| |
| if (len > length) |
| len = length; |
| if (len > sge.sge_length) |
| len = sge.sge_length; |
| BUG_ON(len == 0); |
| if (((long) sge.vaddr & (sizeof(u32) - 1)) || |
| (len != length && (len & (sizeof(u32) - 1)))) { |
| ndesc = 0; |
| break; |
| } |
| ndesc++; |
| sge.vaddr += len; |
| sge.length -= len; |
| sge.sge_length -= len; |
| if (sge.sge_length == 0) { |
| if (--num_sge) |
| sge = *sg_list++; |
| } else if (sge.length == 0 && sge.mr != NULL) { |
| if (++sge.n >= IPATH_SEGSZ) { |
| if (++sge.m >= sge.mr->mapsz) |
| break; |
| sge.n = 0; |
| } |
| sge.vaddr = |
| sge.mr->map[sge.m]->segs[sge.n].vaddr; |
| sge.length = |
| sge.mr->map[sge.m]->segs[sge.n].length; |
| } |
| length -= len; |
| } |
| return ndesc; |
| } |
| |
| /* |
| * Copy from the SGEs to the data buffer. |
| */ |
| static void ipath_copy_from_sge(void *data, struct ipath_sge_state *ss, |
| u32 length) |
| { |
| struct ipath_sge *sge = &ss->sge; |
| |
| while (length) { |
| u32 len = sge->length; |
| |
| if (len > length) |
| len = length; |
| if (len > sge->sge_length) |
| len = sge->sge_length; |
| BUG_ON(len == 0); |
| memcpy(data, sge->vaddr, len); |
| sge->vaddr += len; |
| sge->length -= len; |
| sge->sge_length -= len; |
| if (sge->sge_length == 0) { |
| if (--ss->num_sge) |
| *sge = *ss->sg_list++; |
| } else if (sge->length == 0 && sge->mr != NULL) { |
| if (++sge->n >= IPATH_SEGSZ) { |
| if (++sge->m >= sge->mr->mapsz) |
| break; |
| sge->n = 0; |
| } |
| sge->vaddr = |
| sge->mr->map[sge->m]->segs[sge->n].vaddr; |
| sge->length = |
| sge->mr->map[sge->m]->segs[sge->n].length; |
| } |
| data += len; |
| length -= len; |
| } |
| } |
| |
| /** |
| * ipath_post_one_send - post one RC, UC, or UD send work request |
| * @qp: the QP to post on |
| * @wr: the work request to send |
| */ |
| static int ipath_post_one_send(struct ipath_qp *qp, struct ib_send_wr *wr) |
| { |
| struct ipath_swqe *wqe; |
| u32 next; |
| int i; |
| int j; |
| int acc; |
| int ret; |
| unsigned long flags; |
| struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd; |
| |
| spin_lock_irqsave(&qp->s_lock, flags); |
| |
| if (qp->ibqp.qp_type != IB_QPT_SMI && |
| !(dd->ipath_flags & IPATH_LINKACTIVE)) { |
| ret = -ENETDOWN; |
| goto bail; |
| } |
| |
| /* Check that state is OK to post send. */ |
| if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK))) |
| goto bail_inval; |
| |
| /* IB spec says that num_sge == 0 is OK. */ |
| if (wr->num_sge > qp->s_max_sge) |
| goto bail_inval; |
| |
| /* |
| * Don't allow RDMA reads or atomic operations on UC or |
| * undefined operations. |
| * Make sure buffer is large enough to hold the result for atomics. |
| */ |
| if (qp->ibqp.qp_type == IB_QPT_UC) { |
| if ((unsigned) wr->opcode >= IB_WR_RDMA_READ) |
| goto bail_inval; |
| } else if (qp->ibqp.qp_type == IB_QPT_UD) { |
| /* Check UD opcode */ |
| if (wr->opcode != IB_WR_SEND && |
| wr->opcode != IB_WR_SEND_WITH_IMM) |
| goto bail_inval; |
| /* Check UD destination address PD */ |
| if (qp->ibqp.pd != wr->wr.ud.ah->pd) |
| goto bail_inval; |
| } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) |
| goto bail_inval; |
| else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP && |
| (wr->num_sge == 0 || |
| wr->sg_list[0].length < sizeof(u64) || |
| wr->sg_list[0].addr & (sizeof(u64) - 1))) |
| goto bail_inval; |
| else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic) |
| goto bail_inval; |
| |
| next = qp->s_head + 1; |
| if (next >= qp->s_size) |
| next = 0; |
| if (next == qp->s_last) { |
| ret = -ENOMEM; |
| goto bail; |
| } |
| |
| wqe = get_swqe_ptr(qp, qp->s_head); |
| wqe->wr = *wr; |
| wqe->length = 0; |
| if (wr->num_sge) { |
| acc = wr->opcode >= IB_WR_RDMA_READ ? |
| IB_ACCESS_LOCAL_WRITE : 0; |
| for (i = 0, j = 0; i < wr->num_sge; i++) { |
| u32 length = wr->sg_list[i].length; |
| int ok; |
| |
| if (length == 0) |
| continue; |
| ok = ipath_lkey_ok(qp, &wqe->sg_list[j], |
| &wr->sg_list[i], acc); |
| if (!ok) |
| goto bail_inval; |
| wqe->length += length; |
| j++; |
| } |
| wqe->wr.num_sge = j; |
| } |
| if (qp->ibqp.qp_type == IB_QPT_UC || |
| qp->ibqp.qp_type == IB_QPT_RC) { |
| if (wqe->length > 0x80000000U) |
| goto bail_inval; |
| } else if (wqe->length > to_idev(qp->ibqp.device)->dd->ipath_ibmtu) |
| goto bail_inval; |
| wqe->ssn = qp->s_ssn++; |
| qp->s_head = next; |
| |
| ret = 0; |
| goto bail; |
| |
| bail_inval: |
| ret = -EINVAL; |
| bail: |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| return ret; |
| } |
| |
| /** |
| * ipath_post_send - post a send on a QP |
| * @ibqp: the QP to post the send on |
| * @wr: the list of work requests to post |
| * @bad_wr: the first bad WR is put here |
| * |
| * This may be called from interrupt context. |
| */ |
| static int ipath_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, |
| struct ib_send_wr **bad_wr) |
| { |
| struct ipath_qp *qp = to_iqp(ibqp); |
| int err = 0; |
| |
| for (; wr; wr = wr->next) { |
| err = ipath_post_one_send(qp, wr); |
| if (err) { |
| *bad_wr = wr; |
| goto bail; |
| } |
| } |
| |
| /* Try to do the send work in the caller's context. */ |
| ipath_do_send((unsigned long) qp); |
| |
| bail: |
| return err; |
| } |
| |
| /** |
| * ipath_post_receive - post a receive on a QP |
| * @ibqp: the QP to post the receive on |
| * @wr: the WR to post |
| * @bad_wr: the first bad WR is put here |
| * |
| * This may be called from interrupt context. |
| */ |
| static int ipath_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, |
| struct ib_recv_wr **bad_wr) |
| { |
| struct ipath_qp *qp = to_iqp(ibqp); |
| struct ipath_rwq *wq = qp->r_rq.wq; |
| unsigned long flags; |
| int ret; |
| |
| /* Check that state is OK to post receive. */ |
| if (!(ib_ipath_state_ops[qp->state] & IPATH_POST_RECV_OK) || !wq) { |
| *bad_wr = wr; |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| for (; wr; wr = wr->next) { |
| struct ipath_rwqe *wqe; |
| u32 next; |
| int i; |
| |
| if ((unsigned) wr->num_sge > qp->r_rq.max_sge) { |
| *bad_wr = wr; |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| spin_lock_irqsave(&qp->r_rq.lock, flags); |
| next = wq->head + 1; |
| if (next >= qp->r_rq.size) |
| next = 0; |
| if (next == wq->tail) { |
| spin_unlock_irqrestore(&qp->r_rq.lock, flags); |
| *bad_wr = wr; |
| ret = -ENOMEM; |
| goto bail; |
| } |
| |
| wqe = get_rwqe_ptr(&qp->r_rq, wq->head); |
| wqe->wr_id = wr->wr_id; |
| wqe->num_sge = wr->num_sge; |
| for (i = 0; i < wr->num_sge; i++) |
| wqe->sg_list[i] = wr->sg_list[i]; |
| /* Make sure queue entry is written before the head index. */ |
| smp_wmb(); |
| wq->head = next; |
| spin_unlock_irqrestore(&qp->r_rq.lock, flags); |
| } |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_qp_rcv - processing an incoming packet on a QP |
| * @dev: the device the packet came on |
| * @hdr: the packet header |
| * @has_grh: true if the packet has a GRH |
| * @data: the packet data |
| * @tlen: the packet length |
| * @qp: the QP the packet came on |
| * |
| * This is called from ipath_ib_rcv() to process an incoming packet |
| * for the given QP. |
| * Called at interrupt level. |
| */ |
| static void ipath_qp_rcv(struct ipath_ibdev *dev, |
| struct ipath_ib_header *hdr, int has_grh, |
| void *data, u32 tlen, struct ipath_qp *qp) |
| { |
| /* Check for valid receive state. */ |
| if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) { |
| dev->n_pkt_drops++; |
| return; |
| } |
| |
| switch (qp->ibqp.qp_type) { |
| case IB_QPT_SMI: |
| case IB_QPT_GSI: |
| if (ib_ipath_disable_sma) |
| break; |
| /* FALLTHROUGH */ |
| case IB_QPT_UD: |
| ipath_ud_rcv(dev, hdr, has_grh, data, tlen, qp); |
| break; |
| |
| case IB_QPT_RC: |
| ipath_rc_rcv(dev, hdr, has_grh, data, tlen, qp); |
| break; |
| |
| case IB_QPT_UC: |
| ipath_uc_rcv(dev, hdr, has_grh, data, tlen, qp); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ipath_ib_rcv - process an incoming packet |
| * @arg: the device pointer |
| * @rhdr: the header of the packet |
| * @data: the packet data |
| * @tlen: the packet length |
| * |
| * This is called from ipath_kreceive() to process an incoming packet at |
| * interrupt level. Tlen is the length of the header + data + CRC in bytes. |
| */ |
| void ipath_ib_rcv(struct ipath_ibdev *dev, void *rhdr, void *data, |
| u32 tlen) |
| { |
| struct ipath_ib_header *hdr = rhdr; |
| struct ipath_other_headers *ohdr; |
| struct ipath_qp *qp; |
| u32 qp_num; |
| int lnh; |
| u8 opcode; |
| u16 lid; |
| |
| if (unlikely(dev == NULL)) |
| goto bail; |
| |
| if (unlikely(tlen < 24)) { /* LRH+BTH+CRC */ |
| dev->rcv_errors++; |
| goto bail; |
| } |
| |
| /* Check for a valid destination LID (see ch. 7.11.1). */ |
| lid = be16_to_cpu(hdr->lrh[1]); |
| if (lid < IPATH_MULTICAST_LID_BASE) { |
| lid &= ~((1 << dev->dd->ipath_lmc) - 1); |
| if (unlikely(lid != dev->dd->ipath_lid)) { |
| dev->rcv_errors++; |
| goto bail; |
| } |
| } |
| |
| /* Check for GRH */ |
| lnh = be16_to_cpu(hdr->lrh[0]) & 3; |
| if (lnh == IPATH_LRH_BTH) |
| ohdr = &hdr->u.oth; |
| else if (lnh == IPATH_LRH_GRH) |
| ohdr = &hdr->u.l.oth; |
| else { |
| dev->rcv_errors++; |
| goto bail; |
| } |
| |
| opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f; |
| dev->opstats[opcode].n_bytes += tlen; |
| dev->opstats[opcode].n_packets++; |
| |
| /* Get the destination QP number. */ |
| qp_num = be32_to_cpu(ohdr->bth[1]) & IPATH_QPN_MASK; |
| if (qp_num == IPATH_MULTICAST_QPN) { |
| struct ipath_mcast *mcast; |
| struct ipath_mcast_qp *p; |
| |
| if (lnh != IPATH_LRH_GRH) { |
| dev->n_pkt_drops++; |
| goto bail; |
| } |
| mcast = ipath_mcast_find(&hdr->u.l.grh.dgid); |
| if (mcast == NULL) { |
| dev->n_pkt_drops++; |
| goto bail; |
| } |
| dev->n_multicast_rcv++; |
| list_for_each_entry_rcu(p, &mcast->qp_list, list) |
| ipath_qp_rcv(dev, hdr, 1, data, tlen, p->qp); |
| /* |
| * Notify ipath_multicast_detach() if it is waiting for us |
| * to finish. |
| */ |
| if (atomic_dec_return(&mcast->refcount) <= 1) |
| wake_up(&mcast->wait); |
| } else { |
| qp = ipath_lookup_qpn(&dev->qp_table, qp_num); |
| if (qp) { |
| dev->n_unicast_rcv++; |
| ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data, |
| tlen, qp); |
| /* |
| * Notify ipath_destroy_qp() if it is waiting |
| * for us to finish. |
| */ |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } else |
| dev->n_pkt_drops++; |
| } |
| |
| bail:; |
| } |
| |
| /** |
| * ipath_ib_timer - verbs timer |
| * @arg: the device pointer |
| * |
| * This is called from ipath_do_rcv_timer() at interrupt level to check for |
| * QPs which need retransmits and to collect performance numbers. |
| */ |
| static void ipath_ib_timer(struct ipath_ibdev *dev) |
| { |
| struct ipath_qp *resend = NULL; |
| struct ipath_qp *rnr = NULL; |
| struct list_head *last; |
| struct ipath_qp *qp; |
| unsigned long flags; |
| |
| if (dev == NULL) |
| return; |
| |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| /* Start filling the next pending queue. */ |
| if (++dev->pending_index >= ARRAY_SIZE(dev->pending)) |
| dev->pending_index = 0; |
| /* Save any requests still in the new queue, they have timed out. */ |
| last = &dev->pending[dev->pending_index]; |
| while (!list_empty(last)) { |
| qp = list_entry(last->next, struct ipath_qp, timerwait); |
| list_del_init(&qp->timerwait); |
| qp->timer_next = resend; |
| resend = qp; |
| atomic_inc(&qp->refcount); |
| } |
| last = &dev->rnrwait; |
| if (!list_empty(last)) { |
| qp = list_entry(last->next, struct ipath_qp, timerwait); |
| if (--qp->s_rnr_timeout == 0) { |
| do { |
| list_del_init(&qp->timerwait); |
| qp->timer_next = rnr; |
| rnr = qp; |
| atomic_inc(&qp->refcount); |
| if (list_empty(last)) |
| break; |
| qp = list_entry(last->next, struct ipath_qp, |
| timerwait); |
| } while (qp->s_rnr_timeout == 0); |
| } |
| } |
| /* |
| * We should only be in the started state if pma_sample_start != 0 |
| */ |
| if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED && |
| --dev->pma_sample_start == 0) { |
| dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING; |
| ipath_snapshot_counters(dev->dd, &dev->ipath_sword, |
| &dev->ipath_rword, |
| &dev->ipath_spkts, |
| &dev->ipath_rpkts, |
| &dev->ipath_xmit_wait); |
| } |
| if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) { |
| if (dev->pma_sample_interval == 0) { |
| u64 ta, tb, tc, td, te; |
| |
| dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE; |
| ipath_snapshot_counters(dev->dd, &ta, &tb, |
| &tc, &td, &te); |
| |
| dev->ipath_sword = ta - dev->ipath_sword; |
| dev->ipath_rword = tb - dev->ipath_rword; |
| dev->ipath_spkts = tc - dev->ipath_spkts; |
| dev->ipath_rpkts = td - dev->ipath_rpkts; |
| dev->ipath_xmit_wait = te - dev->ipath_xmit_wait; |
| } |
| else |
| dev->pma_sample_interval--; |
| } |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| |
| /* XXX What if timer fires again while this is running? */ |
| while (resend != NULL) { |
| qp = resend; |
| resend = qp->timer_next; |
| |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if (qp->s_last != qp->s_tail && |
| ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) { |
| dev->n_timeouts++; |
| ipath_restart_rc(qp, qp->s_last_psn + 1); |
| } |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| |
| /* Notify ipath_destroy_qp() if it is waiting. */ |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| while (rnr != NULL) { |
| qp = rnr; |
| rnr = qp->timer_next; |
| |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) |
| ipath_schedule_send(qp); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| |
| /* Notify ipath_destroy_qp() if it is waiting. */ |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| } |
| |
| static void update_sge(struct ipath_sge_state *ss, u32 length) |
| { |
| struct ipath_sge *sge = &ss->sge; |
| |
| sge->vaddr += length; |
| sge->length -= length; |
| sge->sge_length -= length; |
| if (sge->sge_length == 0) { |
| if (--ss->num_sge) |
| *sge = *ss->sg_list++; |
| } else if (sge->length == 0 && sge->mr != NULL) { |
| if (++sge->n >= IPATH_SEGSZ) { |
| if (++sge->m >= sge->mr->mapsz) |
| return; |
| sge->n = 0; |
| } |
| sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr; |
| sge->length = sge->mr->map[sge->m]->segs[sge->n].length; |
| } |
| } |
| |
| #ifdef __LITTLE_ENDIAN |
| static inline u32 get_upper_bits(u32 data, u32 shift) |
| { |
| return data >> shift; |
| } |
| |
| static inline u32 set_upper_bits(u32 data, u32 shift) |
| { |
| return data << shift; |
| } |
| |
| static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off) |
| { |
| data <<= ((sizeof(u32) - n) * BITS_PER_BYTE); |
| data >>= ((sizeof(u32) - n - off) * BITS_PER_BYTE); |
| return data; |
| } |
| #else |
| static inline u32 get_upper_bits(u32 data, u32 shift) |
| { |
| return data << shift; |
| } |
| |
| static inline u32 set_upper_bits(u32 data, u32 shift) |
| { |
| return data >> shift; |
| } |
| |
| static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off) |
| { |
| data >>= ((sizeof(u32) - n) * BITS_PER_BYTE); |
| data <<= ((sizeof(u32) - n - off) * BITS_PER_BYTE); |
| return data; |
| } |
| #endif |
| |
| static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss, |
| u32 length, unsigned flush_wc) |
| { |
| u32 extra = 0; |
| u32 data = 0; |
| u32 last; |
| |
| while (1) { |
| u32 len = ss->sge.length; |
| u32 off; |
| |
| if (len > length) |
| len = length; |
| if (len > ss->sge.sge_length) |
| len = ss->sge.sge_length; |
| BUG_ON(len == 0); |
| /* If the source address is not aligned, try to align it. */ |
| off = (unsigned long)ss->sge.vaddr & (sizeof(u32) - 1); |
| if (off) { |
| u32 *addr = (u32 *)((unsigned long)ss->sge.vaddr & |
| ~(sizeof(u32) - 1)); |
| u32 v = get_upper_bits(*addr, off * BITS_PER_BYTE); |
| u32 y; |
| |
| y = sizeof(u32) - off; |
| if (len > y) |
| len = y; |
| if (len + extra >= sizeof(u32)) { |
| data |= set_upper_bits(v, extra * |
| BITS_PER_BYTE); |
| len = sizeof(u32) - extra; |
| if (len == length) { |
| last = data; |
| break; |
| } |
| __raw_writel(data, piobuf); |
| piobuf++; |
| extra = 0; |
| data = 0; |
| } else { |
| /* Clear unused upper bytes */ |
| data |= clear_upper_bytes(v, len, extra); |
| if (len == length) { |
| last = data; |
| break; |
| } |
| extra += len; |
| } |
| } else if (extra) { |
| /* Source address is aligned. */ |
| u32 *addr = (u32 *) ss->sge.vaddr; |
| int shift = extra * BITS_PER_BYTE; |
| int ushift = 32 - shift; |
| u32 l = len; |
| |
| while (l >= sizeof(u32)) { |
| u32 v = *addr; |
| |
| data |= set_upper_bits(v, shift); |
| __raw_writel(data, piobuf); |
| data = get_upper_bits(v, ushift); |
| piobuf++; |
| addr++; |
| l -= sizeof(u32); |
| } |
| /* |
| * We still have 'extra' number of bytes leftover. |
| */ |
| if (l) { |
| u32 v = *addr; |
| |
| if (l + extra >= sizeof(u32)) { |
| data |= set_upper_bits(v, shift); |
| len -= l + extra - sizeof(u32); |
| if (len == length) { |
| last = data; |
| break; |
| } |
| __raw_writel(data, piobuf); |
| piobuf++; |
| extra = 0; |
| data = 0; |
| } else { |
| /* Clear unused upper bytes */ |
| data |= clear_upper_bytes(v, l, |
| extra); |
| if (len == length) { |
| last = data; |
| break; |
| } |
| extra += l; |
| } |
| } else if (len == length) { |
| last = data; |
| break; |
| } |
| } else if (len == length) { |
| u32 w; |
| |
| /* |
| * Need to round up for the last dword in the |
| * packet. |
| */ |
| w = (len + 3) >> 2; |
| __iowrite32_copy(piobuf, ss->sge.vaddr, w - 1); |
| piobuf += w - 1; |
| last = ((u32 *) ss->sge.vaddr)[w - 1]; |
| break; |
| } else { |
| u32 w = len >> 2; |
| |
| __iowrite32_copy(piobuf, ss->sge.vaddr, w); |
| piobuf += w; |
| |
| extra = len & (sizeof(u32) - 1); |
| if (extra) { |
| u32 v = ((u32 *) ss->sge.vaddr)[w]; |
| |
| /* Clear unused upper bytes */ |
| data = clear_upper_bytes(v, extra, 0); |
| } |
| } |
| update_sge(ss, len); |
| length -= len; |
| } |
| /* Update address before sending packet. */ |
| update_sge(ss, length); |
| if (flush_wc) { |
| /* must flush early everything before trigger word */ |
| ipath_flush_wc(); |
| __raw_writel(last, piobuf); |
| /* be sure trigger word is written */ |
| ipath_flush_wc(); |
| } else |
| __raw_writel(last, piobuf); |
| } |
| |
| /* |
| * Convert IB rate to delay multiplier. |
| */ |
| unsigned ipath_ib_rate_to_mult(enum ib_rate rate) |
| { |
| switch (rate) { |
| case IB_RATE_2_5_GBPS: return 8; |
| case IB_RATE_5_GBPS: return 4; |
| case IB_RATE_10_GBPS: return 2; |
| case IB_RATE_20_GBPS: return 1; |
| default: return 0; |
| } |
| } |
| |
| /* |
| * Convert delay multiplier to IB rate |
| */ |
| static enum ib_rate ipath_mult_to_ib_rate(unsigned mult) |
| { |
| switch (mult) { |
| case 8: return IB_RATE_2_5_GBPS; |
| case 4: return IB_RATE_5_GBPS; |
| case 2: return IB_RATE_10_GBPS; |
| case 1: return IB_RATE_20_GBPS; |
| default: return IB_RATE_PORT_CURRENT; |
| } |
| } |
| |
| static inline struct ipath_verbs_txreq *get_txreq(struct ipath_ibdev *dev) |
| { |
| struct ipath_verbs_txreq *tx = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| if (!list_empty(&dev->txreq_free)) { |
| struct list_head *l = dev->txreq_free.next; |
| |
| list_del(l); |
| tx = list_entry(l, struct ipath_verbs_txreq, txreq.list); |
| } |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| return tx; |
| } |
| |
| static inline void put_txreq(struct ipath_ibdev *dev, |
| struct ipath_verbs_txreq *tx) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| list_add(&tx->txreq.list, &dev->txreq_free); |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| } |
| |
| static void sdma_complete(void *cookie, int status) |
| { |
| struct ipath_verbs_txreq *tx = cookie; |
| struct ipath_qp *qp = tx->qp; |
| struct ipath_ibdev *dev = to_idev(qp->ibqp.device); |
| unsigned long flags; |
| enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ? |
| IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR; |
| |
| if (atomic_dec_and_test(&qp->s_dma_busy)) { |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if (tx->wqe) |
| ipath_send_complete(qp, tx->wqe, ibs); |
| if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND && |
| qp->s_last != qp->s_head) || |
| (qp->s_flags & IPATH_S_WAIT_DMA)) |
| ipath_schedule_send(qp); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| wake_up(&qp->wait_dma); |
| } else if (tx->wqe) { |
| spin_lock_irqsave(&qp->s_lock, flags); |
| ipath_send_complete(qp, tx->wqe, ibs); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| } |
| |
| if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF) |
| kfree(tx->txreq.map_addr); |
| put_txreq(dev, tx); |
| |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| |
| static void decrement_dma_busy(struct ipath_qp *qp) |
| { |
| unsigned long flags; |
| |
| if (atomic_dec_and_test(&qp->s_dma_busy)) { |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND && |
| qp->s_last != qp->s_head) || |
| (qp->s_flags & IPATH_S_WAIT_DMA)) |
| ipath_schedule_send(qp); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| wake_up(&qp->wait_dma); |
| } |
| } |
| |
| /* |
| * Compute the number of clock cycles of delay before sending the next packet. |
| * The multipliers reflect the number of clocks for the fastest rate so |
| * one tick at 4xDDR is 8 ticks at 1xSDR. |
| * If the destination port will take longer to receive a packet than |
| * the outgoing link can send it, we need to delay sending the next packet |
| * by the difference in time it takes the receiver to receive and the sender |
| * to send this packet. |
| * Note that this delay is always correct for UC and RC but not always |
| * optimal for UD. For UD, the destination HCA can be different for each |
| * packet, in which case, we could send packets to a different destination |
| * while "waiting" for the delay. The overhead for doing this without |
| * HW support is more than just paying the cost of delaying some packets |
| * unnecessarily. |
| */ |
| static inline unsigned ipath_pkt_delay(u32 plen, u8 snd_mult, u8 rcv_mult) |
| { |
| return (rcv_mult > snd_mult) ? |
| (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0; |
| } |
| |
| static int ipath_verbs_send_dma(struct ipath_qp *qp, |
| struct ipath_ib_header *hdr, u32 hdrwords, |
| struct ipath_sge_state *ss, u32 len, |
| u32 plen, u32 dwords) |
| { |
| struct ipath_ibdev *dev = to_idev(qp->ibqp.device); |
| struct ipath_devdata *dd = dev->dd; |
| struct ipath_verbs_txreq *tx; |
| u32 *piobuf; |
| u32 control; |
| u32 ndesc; |
| int ret; |
| |
| tx = qp->s_tx; |
| if (tx) { |
| qp->s_tx = NULL; |
| /* resend previously constructed packet */ |
| atomic_inc(&qp->s_dma_busy); |
| ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx); |
| if (ret) { |
| qp->s_tx = tx; |
| decrement_dma_busy(qp); |
| } |
| goto bail; |
| } |
| |
| tx = get_txreq(dev); |
| if (!tx) { |
| ret = -EBUSY; |
| goto bail; |
| } |
| |
| /* |
| * Get the saved delay count we computed for the previous packet |
| * and save the delay count for this packet to be used next time |
| * we get here. |
| */ |
| control = qp->s_pkt_delay; |
| qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult); |
| |
| tx->qp = qp; |
| atomic_inc(&qp->refcount); |
| tx->wqe = qp->s_wqe; |
| tx->txreq.callback = sdma_complete; |
| tx->txreq.callback_cookie = tx; |
| tx->txreq.flags = IPATH_SDMA_TXREQ_F_HEADTOHOST | |
| IPATH_SDMA_TXREQ_F_INTREQ | IPATH_SDMA_TXREQ_F_FREEDESC; |
| if (plen + 1 >= IPATH_SMALLBUF_DWORDS) |
| tx->txreq.flags |= IPATH_SDMA_TXREQ_F_USELARGEBUF; |
| |
| /* VL15 packets bypass credit check */ |
| if ((be16_to_cpu(hdr->lrh[0]) >> 12) == 15) { |
| control |= 1ULL << 31; |
| tx->txreq.flags |= IPATH_SDMA_TXREQ_F_VL15; |
| } |
| |
| if (len) { |
| /* |
| * Don't try to DMA if it takes more descriptors than |
| * the queue holds. |
| */ |
| ndesc = ipath_count_sge(ss, len); |
| if (ndesc >= dd->ipath_sdma_descq_cnt) |
| ndesc = 0; |
| } else |
| ndesc = 1; |
| if (ndesc) { |
| tx->hdr.pbc[0] = cpu_to_le32(plen); |
| tx->hdr.pbc[1] = cpu_to_le32(control); |
| memcpy(&tx->hdr.hdr, hdr, hdrwords << 2); |
| tx->txreq.sg_count = ndesc; |
| tx->map_len = (hdrwords + 2) << 2; |
| tx->txreq.map_addr = &tx->hdr; |
| atomic_inc(&qp->s_dma_busy); |
| ret = ipath_sdma_verbs_send(dd, ss, dwords, tx); |
| if (ret) { |
| /* save ss and length in dwords */ |
| tx->ss = ss; |
| tx->len = dwords; |
| qp->s_tx = tx; |
| decrement_dma_busy(qp); |
| } |
| goto bail; |
| } |
| |
| /* Allocate a buffer and copy the header and payload to it. */ |
| tx->map_len = (plen + 1) << 2; |
| piobuf = kmalloc(tx->map_len, GFP_ATOMIC); |
| if (unlikely(piobuf == NULL)) { |
| ret = -EBUSY; |
| goto err_tx; |
| } |
| tx->txreq.map_addr = piobuf; |
| tx->txreq.flags |= IPATH_SDMA_TXREQ_F_FREEBUF; |
| tx->txreq.sg_count = 1; |
| |
| *piobuf++ = (__force u32) cpu_to_le32(plen); |
| *piobuf++ = (__force u32) cpu_to_le32(control); |
| memcpy(piobuf, hdr, hdrwords << 2); |
| ipath_copy_from_sge(piobuf + hdrwords, ss, len); |
| |
| atomic_inc(&qp->s_dma_busy); |
| ret = ipath_sdma_verbs_send(dd, NULL, 0, tx); |
| /* |
| * If we couldn't queue the DMA request, save the info |
| * and try again later rather than destroying the |
| * buffer and undoing the side effects of the copy. |
| */ |
| if (ret) { |
| tx->ss = NULL; |
| tx->len = 0; |
| qp->s_tx = tx; |
| decrement_dma_busy(qp); |
| } |
| dev->n_unaligned++; |
| goto bail; |
| |
| err_tx: |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| put_txreq(dev, tx); |
| bail: |
| return ret; |
| } |
| |
| static int ipath_verbs_send_pio(struct ipath_qp *qp, |
| struct ipath_ib_header *ibhdr, u32 hdrwords, |
| struct ipath_sge_state *ss, u32 len, |
| u32 plen, u32 dwords) |
| { |
| struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd; |
| u32 *hdr = (u32 *) ibhdr; |
| u32 __iomem *piobuf; |
| unsigned flush_wc; |
| u32 control; |
| int ret; |
| unsigned long flags; |
| |
| piobuf = ipath_getpiobuf(dd, plen, NULL); |
| if (unlikely(piobuf == NULL)) { |
| ret = -EBUSY; |
| goto bail; |
| } |
| |
| /* |
| * Get the saved delay count we computed for the previous packet |
| * and save the delay count for this packet to be used next time |
| * we get here. |
| */ |
| control = qp->s_pkt_delay; |
| qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult); |
| |
| /* VL15 packets bypass credit check */ |
| if ((be16_to_cpu(ibhdr->lrh[0]) >> 12) == 15) |
| control |= 1ULL << 31; |
| |
| /* |
| * Write the length to the control qword plus any needed flags. |
| * We have to flush after the PBC for correctness on some cpus |
| * or WC buffer can be written out of order. |
| */ |
| writeq(((u64) control << 32) | plen, piobuf); |
| piobuf += 2; |
| |
| flush_wc = dd->ipath_flags & IPATH_PIO_FLUSH_WC; |
| if (len == 0) { |
| /* |
| * If there is just the header portion, must flush before |
| * writing last word of header for correctness, and after |
| * the last header word (trigger word). |
| */ |
| if (flush_wc) { |
| ipath_flush_wc(); |
| __iowrite32_copy(piobuf, hdr, hdrwords - 1); |
| ipath_flush_wc(); |
| __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords - 1); |
| ipath_flush_wc(); |
| } else |
| __iowrite32_copy(piobuf, hdr, hdrwords); |
| goto done; |
| } |
| |
| if (flush_wc) |
| ipath_flush_wc(); |
| __iowrite32_copy(piobuf, hdr, hdrwords); |
| piobuf += hdrwords; |
| |
| /* The common case is aligned and contained in one segment. */ |
| if (likely(ss->num_sge == 1 && len <= ss->sge.length && |
| !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) { |
| u32 *addr = (u32 *) ss->sge.vaddr; |
| |
| /* Update address before sending packet. */ |
| update_sge(ss, len); |
| if (flush_wc) { |
| __iowrite32_copy(piobuf, addr, dwords - 1); |
| /* must flush early everything before trigger word */ |
| ipath_flush_wc(); |
| __raw_writel(addr[dwords - 1], piobuf + dwords - 1); |
| /* be sure trigger word is written */ |
| ipath_flush_wc(); |
| } else |
| __iowrite32_copy(piobuf, addr, dwords); |
| goto done; |
| } |
| copy_io(piobuf, ss, len, flush_wc); |
| done: |
| if (qp->s_wqe) { |
| spin_lock_irqsave(&qp->s_lock, flags); |
| ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| } |
| ret = 0; |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_verbs_send - send a packet |
| * @qp: the QP to send on |
| * @hdr: the packet header |
| * @hdrwords: the number of 32-bit words in the header |
| * @ss: the SGE to send |
| * @len: the length of the packet in bytes |
| */ |
| int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr, |
| u32 hdrwords, struct ipath_sge_state *ss, u32 len) |
| { |
| struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd; |
| u32 plen; |
| int ret; |
| u32 dwords = (len + 3) >> 2; |
| |
| /* |
| * Calculate the send buffer trigger address. |
| * The +1 counts for the pbc control dword following the pbc length. |
| */ |
| plen = hdrwords + dwords + 1; |
| |
| /* |
| * VL15 packets (IB_QPT_SMI) will always use PIO, so we |
| * can defer SDMA restart until link goes ACTIVE without |
| * worrying about just how we got there. |
| */ |
| if (qp->ibqp.qp_type == IB_QPT_SMI || |
| !(dd->ipath_flags & IPATH_HAS_SEND_DMA)) |
| ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len, |
| plen, dwords); |
| else |
| ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len, |
| plen, dwords); |
| |
| return ret; |
| } |
| |
| int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords, |
| u64 *rwords, u64 *spkts, u64 *rpkts, |
| u64 *xmit_wait) |
| { |
| int ret; |
| |
| if (!(dd->ipath_flags & IPATH_INITTED)) { |
| /* no hardware, freeze, etc. */ |
| ret = -EINVAL; |
| goto bail; |
| } |
| *swords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt); |
| *rwords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt); |
| *spkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt); |
| *rpkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt); |
| *xmit_wait = ipath_snap_cntr(dd, dd->ipath_cregs->cr_sendstallcnt); |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_get_counters - get various chip counters |
| * @dd: the infinipath device |
| * @cntrs: counters are placed here |
| * |
| * Return the counters needed by recv_pma_get_portcounters(). |
| */ |
| int ipath_get_counters(struct ipath_devdata *dd, |
| struct ipath_verbs_counters *cntrs) |
| { |
| struct ipath_cregs const *crp = dd->ipath_cregs; |
| int ret; |
| |
| if (!(dd->ipath_flags & IPATH_INITTED)) { |
| /* no hardware, freeze, etc. */ |
| ret = -EINVAL; |
| goto bail; |
| } |
| cntrs->symbol_error_counter = |
| ipath_snap_cntr(dd, crp->cr_ibsymbolerrcnt); |
| cntrs->link_error_recovery_counter = |
| ipath_snap_cntr(dd, crp->cr_iblinkerrrecovcnt); |
| /* |
| * The link downed counter counts when the other side downs the |
| * connection. We add in the number of times we downed the link |
| * due to local link integrity errors to compensate. |
| */ |
| cntrs->link_downed_counter = |
| ipath_snap_cntr(dd, crp->cr_iblinkdowncnt); |
| cntrs->port_rcv_errors = |
| ipath_snap_cntr(dd, crp->cr_rxdroppktcnt) + |
| ipath_snap_cntr(dd, crp->cr_rcvovflcnt) + |
| ipath_snap_cntr(dd, crp->cr_portovflcnt) + |
| ipath_snap_cntr(dd, crp->cr_err_rlencnt) + |
| ipath_snap_cntr(dd, crp->cr_invalidrlencnt) + |
| ipath_snap_cntr(dd, crp->cr_errlinkcnt) + |
| ipath_snap_cntr(dd, crp->cr_erricrccnt) + |
| ipath_snap_cntr(dd, crp->cr_errvcrccnt) + |
| ipath_snap_cntr(dd, crp->cr_errlpcrccnt) + |
| ipath_snap_cntr(dd, crp->cr_badformatcnt) + |
| dd->ipath_rxfc_unsupvl_errs; |
| if (crp->cr_rxotherlocalphyerrcnt) |
| cntrs->port_rcv_errors += |
| ipath_snap_cntr(dd, crp->cr_rxotherlocalphyerrcnt); |
| if (crp->cr_rxvlerrcnt) |
| cntrs->port_rcv_errors += |
| ipath_snap_cntr(dd, crp->cr_rxvlerrcnt); |
| cntrs->port_rcv_remphys_errors = |
| ipath_snap_cntr(dd, crp->cr_rcvebpcnt); |
| cntrs->port_xmit_discards = ipath_snap_cntr(dd, crp->cr_unsupvlcnt); |
| cntrs->port_xmit_data = ipath_snap_cntr(dd, crp->cr_wordsendcnt); |
| cntrs->port_rcv_data = ipath_snap_cntr(dd, crp->cr_wordrcvcnt); |
| cntrs->port_xmit_packets = ipath_snap_cntr(dd, crp->cr_pktsendcnt); |
| cntrs->port_rcv_packets = ipath_snap_cntr(dd, crp->cr_pktrcvcnt); |
| cntrs->local_link_integrity_errors = |
| crp->cr_locallinkintegrityerrcnt ? |
| ipath_snap_cntr(dd, crp->cr_locallinkintegrityerrcnt) : |
| ((dd->ipath_flags & IPATH_GPIO_ERRINTRS) ? |
| dd->ipath_lli_errs : dd->ipath_lli_errors); |
| cntrs->excessive_buffer_overrun_errors = |
| crp->cr_excessbufferovflcnt ? |
| ipath_snap_cntr(dd, crp->cr_excessbufferovflcnt) : |
| dd->ipath_overrun_thresh_errs; |
| cntrs->vl15_dropped = crp->cr_vl15droppedpktcnt ? |
| ipath_snap_cntr(dd, crp->cr_vl15droppedpktcnt) : 0; |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_ib_piobufavail - callback when a PIO buffer is available |
| * @arg: the device pointer |
| * |
| * This is called from ipath_intr() at interrupt level when a PIO buffer is |
| * available after ipath_verbs_send() returned an error that no buffers were |
| * available. Return 1 if we consumed all the PIO buffers and we still have |
| * QPs waiting for buffers (for now, just restart the send tasklet and |
| * return zero). |
| */ |
| int ipath_ib_piobufavail(struct ipath_ibdev *dev) |
| { |
| struct list_head *list; |
| struct ipath_qp *qplist; |
| struct ipath_qp *qp; |
| unsigned long flags; |
| |
| if (dev == NULL) |
| goto bail; |
| |
| list = &dev->piowait; |
| qplist = NULL; |
| |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| while (!list_empty(list)) { |
| qp = list_entry(list->next, struct ipath_qp, piowait); |
| list_del_init(&qp->piowait); |
| qp->pio_next = qplist; |
| qplist = qp; |
| atomic_inc(&qp->refcount); |
| } |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| |
| while (qplist != NULL) { |
| qp = qplist; |
| qplist = qp->pio_next; |
| |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) |
| ipath_schedule_send(qp); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| |
| /* Notify ipath_destroy_qp() if it is waiting. */ |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| |
| bail: |
| return 0; |
| } |
| |
| static int ipath_query_device(struct ib_device *ibdev, |
| struct ib_device_attr *props) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| |
| memset(props, 0, sizeof(*props)); |
| |
| props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR | |
| IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT | |
| IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | |
| IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; |
| props->page_size_cap = PAGE_SIZE; |
| props->vendor_id = |
| IPATH_SRC_OUI_1 << 16 | IPATH_SRC_OUI_2 << 8 | IPATH_SRC_OUI_3; |
| props->vendor_part_id = dev->dd->ipath_deviceid; |
| props->hw_ver = dev->dd->ipath_pcirev; |
| |
| props->sys_image_guid = dev->sys_image_guid; |
| |
| props->max_mr_size = ~0ull; |
| props->max_qp = ib_ipath_max_qps; |
| props->max_qp_wr = ib_ipath_max_qp_wrs; |
| props->max_sge = ib_ipath_max_sges; |
| props->max_cq = ib_ipath_max_cqs; |
| props->max_ah = ib_ipath_max_ahs; |
| props->max_cqe = ib_ipath_max_cqes; |
| props->max_mr = dev->lk_table.max; |
| props->max_fmr = dev->lk_table.max; |
| props->max_map_per_fmr = 32767; |
| props->max_pd = ib_ipath_max_pds; |
| props->max_qp_rd_atom = IPATH_MAX_RDMA_ATOMIC; |
| props->max_qp_init_rd_atom = 255; |
| /* props->max_res_rd_atom */ |
| props->max_srq = ib_ipath_max_srqs; |
| props->max_srq_wr = ib_ipath_max_srq_wrs; |
| props->max_srq_sge = ib_ipath_max_srq_sges; |
| /* props->local_ca_ack_delay */ |
| props->atomic_cap = IB_ATOMIC_GLOB; |
| props->max_pkeys = ipath_get_npkeys(dev->dd); |
| props->max_mcast_grp = ib_ipath_max_mcast_grps; |
| props->max_mcast_qp_attach = ib_ipath_max_mcast_qp_attached; |
| props->max_total_mcast_qp_attach = props->max_mcast_qp_attach * |
| props->max_mcast_grp; |
| |
| return 0; |
| } |
| |
| const u8 ipath_cvt_physportstate[32] = { |
| [INFINIPATH_IBCS_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, |
| [INFINIPATH_IBCS_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, |
| [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, |
| [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, |
| [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, |
| [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, |
| [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN |
| }; |
| |
| u32 ipath_get_cr_errpkey(struct ipath_devdata *dd) |
| { |
| return ipath_read_creg32(dd, dd->ipath_cregs->cr_errpkey); |
| } |
| |
| static int ipath_query_port(struct ib_device *ibdev, |
| u8 port, struct ib_port_attr *props) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| struct ipath_devdata *dd = dev->dd; |
| enum ib_mtu mtu; |
| u16 lid = dd->ipath_lid; |
| u64 ibcstat; |
| |
| memset(props, 0, sizeof(*props)); |
| props->lid = lid ? lid : be16_to_cpu(IB_LID_PERMISSIVE); |
| props->lmc = dd->ipath_lmc; |
| props->sm_lid = dev->sm_lid; |
| props->sm_sl = dev->sm_sl; |
| ibcstat = dd->ipath_lastibcstat; |
| /* map LinkState to IB portinfo values. */ |
| props->state = ipath_ib_linkstate(dd, ibcstat) + 1; |
| |
| /* See phys_state_show() */ |
| props->phys_state = /* MEA: assumes shift == 0 */ |
| ipath_cvt_physportstate[dd->ipath_lastibcstat & |
| dd->ibcs_lts_mask]; |
| props->port_cap_flags = dev->port_cap_flags; |
| props->gid_tbl_len = 1; |
| props->max_msg_sz = 0x80000000; |
| props->pkey_tbl_len = ipath_get_npkeys(dd); |
| props->bad_pkey_cntr = ipath_get_cr_errpkey(dd) - |
| dev->z_pkey_violations; |
| props->qkey_viol_cntr = dev->qkey_violations; |
| props->active_width = dd->ipath_link_width_active; |
| /* See rate_show() */ |
| props->active_speed = dd->ipath_link_speed_active; |
| props->max_vl_num = 1; /* VLCap = VL0 */ |
| props->init_type_reply = 0; |
| |
| props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048; |
| switch (dd->ipath_ibmtu) { |
| case 4096: |
| mtu = IB_MTU_4096; |
| break; |
| case 2048: |
| mtu = IB_MTU_2048; |
| break; |
| case 1024: |
| mtu = IB_MTU_1024; |
| break; |
| case 512: |
| mtu = IB_MTU_512; |
| break; |
| case 256: |
| mtu = IB_MTU_256; |
| break; |
| default: |
| mtu = IB_MTU_2048; |
| } |
| props->active_mtu = mtu; |
| props->subnet_timeout = dev->subnet_timeout; |
| |
| return 0; |
| } |
| |
| static int ipath_modify_device(struct ib_device *device, |
| int device_modify_mask, |
| struct ib_device_modify *device_modify) |
| { |
| int ret; |
| |
| if (device_modify_mask & ~(IB_DEVICE_MODIFY_SYS_IMAGE_GUID | |
| IB_DEVICE_MODIFY_NODE_DESC)) { |
| ret = -EOPNOTSUPP; |
| goto bail; |
| } |
| |
| if (device_modify_mask & IB_DEVICE_MODIFY_NODE_DESC) |
| memcpy(device->node_desc, device_modify->node_desc, 64); |
| |
| if (device_modify_mask & IB_DEVICE_MODIFY_SYS_IMAGE_GUID) |
| to_idev(device)->sys_image_guid = |
| cpu_to_be64(device_modify->sys_image_guid); |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| static int ipath_modify_port(struct ib_device *ibdev, |
| u8 port, int port_modify_mask, |
| struct ib_port_modify *props) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| |
| dev->port_cap_flags |= props->set_port_cap_mask; |
| dev->port_cap_flags &= ~props->clr_port_cap_mask; |
| if (port_modify_mask & IB_PORT_SHUTDOWN) |
| ipath_set_linkstate(dev->dd, IPATH_IB_LINKDOWN); |
| if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR) |
| dev->qkey_violations = 0; |
| return 0; |
| } |
| |
| static int ipath_query_gid(struct ib_device *ibdev, u8 port, |
| int index, union ib_gid *gid) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| int ret; |
| |
| if (index >= 1) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| gid->global.subnet_prefix = dev->gid_prefix; |
| gid->global.interface_id = dev->dd->ipath_guid; |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| static struct ib_pd *ipath_alloc_pd(struct ib_device *ibdev, |
| struct ib_ucontext *context, |
| struct ib_udata *udata) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| struct ipath_pd *pd; |
| struct ib_pd *ret; |
| |
| /* |
| * This is actually totally arbitrary. Some correctness tests |
| * assume there's a maximum number of PDs that can be allocated. |
| * We don't actually have this limit, but we fail the test if |
| * we allow allocations of more than we report for this value. |
| */ |
| |
| pd = kmalloc(sizeof *pd, GFP_KERNEL); |
| if (!pd) { |
| ret = ERR_PTR(-ENOMEM); |
| goto bail; |
| } |
| |
| spin_lock(&dev->n_pds_lock); |
| if (dev->n_pds_allocated == ib_ipath_max_pds) { |
| spin_unlock(&dev->n_pds_lock); |
| kfree(pd); |
| ret = ERR_PTR(-ENOMEM); |
| goto bail; |
| } |
| |
| dev->n_pds_allocated++; |
| spin_unlock(&dev->n_pds_lock); |
| |
| /* ib_alloc_pd() will initialize pd->ibpd. */ |
| pd->user = udata != NULL; |
| |
| ret = &pd->ibpd; |
| |
| bail: |
| return ret; |
| } |
| |
| static int ipath_dealloc_pd(struct ib_pd *ibpd) |
| { |
| struct ipath_pd *pd = to_ipd(ibpd); |
| struct ipath_ibdev *dev = to_idev(ibpd->device); |
| |
| spin_lock(&dev->n_pds_lock); |
| dev->n_pds_allocated--; |
| spin_unlock(&dev->n_pds_lock); |
| |
| kfree(pd); |
| |
| return 0; |
| } |
| |
| /** |
| * ipath_create_ah - create an address handle |
| * @pd: the protection domain |
| * @ah_attr: the attributes of the AH |
| * |
| * This may be called from interrupt context. |
| */ |
| static struct ib_ah *ipath_create_ah(struct ib_pd *pd, |
| struct ib_ah_attr *ah_attr) |
| { |
| struct ipath_ah *ah; |
| struct ib_ah *ret; |
| struct ipath_ibdev *dev = to_idev(pd->device); |
| unsigned long flags; |
| |
| /* A multicast address requires a GRH (see ch. 8.4.1). */ |
| if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE && |
| ah_attr->dlid != IPATH_PERMISSIVE_LID && |
| !(ah_attr->ah_flags & IB_AH_GRH)) { |
| ret = ERR_PTR(-EINVAL); |
| goto bail; |
| } |
| |
| if (ah_attr->dlid == 0) { |
| ret = ERR_PTR(-EINVAL); |
| goto bail; |
| } |
| |
| if (ah_attr->port_num < 1 || |
| ah_attr->port_num > pd->device->phys_port_cnt) { |
| ret = ERR_PTR(-EINVAL); |
| goto bail; |
| } |
| |
| ah = kmalloc(sizeof *ah, GFP_ATOMIC); |
| if (!ah) { |
| ret = ERR_PTR(-ENOMEM); |
| goto bail; |
| } |
| |
| spin_lock_irqsave(&dev->n_ahs_lock, flags); |
| if (dev->n_ahs_allocated == ib_ipath_max_ahs) { |
| spin_unlock_irqrestore(&dev->n_ahs_lock, flags); |
| kfree(ah); |
| ret = ERR_PTR(-ENOMEM); |
| goto bail; |
| } |
| |
| dev->n_ahs_allocated++; |
| spin_unlock_irqrestore(&dev->n_ahs_lock, flags); |
| |
| /* ib_create_ah() will initialize ah->ibah. */ |
| ah->attr = *ah_attr; |
| ah->attr.static_rate = ipath_ib_rate_to_mult(ah_attr->static_rate); |
| |
| ret = &ah->ibah; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_destroy_ah - destroy an address handle |
| * @ibah: the AH to destroy |
| * |
| * This may be called from interrupt context. |
| */ |
| static int ipath_destroy_ah(struct ib_ah *ibah) |
| { |
| struct ipath_ibdev *dev = to_idev(ibah->device); |
| struct ipath_ah *ah = to_iah(ibah); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->n_ahs_lock, flags); |
| dev->n_ahs_allocated--; |
| spin_unlock_irqrestore(&dev->n_ahs_lock, flags); |
| |
| kfree(ah); |
| |
| return 0; |
| } |
| |
| static int ipath_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr) |
| { |
| struct ipath_ah *ah = to_iah(ibah); |
| |
| *ah_attr = ah->attr; |
| ah_attr->static_rate = ipath_mult_to_ib_rate(ah->attr.static_rate); |
| |
| return 0; |
| } |
| |
| /** |
| * ipath_get_npkeys - return the size of the PKEY table for port 0 |
| * @dd: the infinipath device |
| */ |
| unsigned ipath_get_npkeys(struct ipath_devdata *dd) |
| { |
| return ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys); |
| } |
| |
| /** |
| * ipath_get_pkey - return the indexed PKEY from the port PKEY table |
| * @dd: the infinipath device |
| * @index: the PKEY index |
| */ |
| unsigned ipath_get_pkey(struct ipath_devdata *dd, unsigned index) |
| { |
| unsigned ret; |
| |
| /* always a kernel port, no locking needed */ |
| if (index >= ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys)) |
| ret = 0; |
| else |
| ret = dd->ipath_pd[0]->port_pkeys[index]; |
| |
| return ret; |
| } |
| |
| static int ipath_query_pkey(struct ib_device *ibdev, u8 port, u16 index, |
| u16 *pkey) |
| { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| int ret; |
| |
| if (index >= ipath_get_npkeys(dev->dd)) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| *pkey = ipath_get_pkey(dev->dd, index); |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_alloc_ucontext - allocate a ucontest |
| * @ibdev: the infiniband device |
| * @udata: not used by the InfiniPath driver |
| */ |
| |
| static struct ib_ucontext *ipath_alloc_ucontext(struct ib_device *ibdev, |
| struct ib_udata *udata) |
| { |
| struct ipath_ucontext *context; |
| struct ib_ucontext *ret; |
| |
| context = kmalloc(sizeof *context, GFP_KERNEL); |
| if (!context) { |
| ret = ERR_PTR(-ENOMEM); |
| goto bail; |
| } |
| |
| ret = &context->ibucontext; |
| |
| bail: |
| return ret; |
| } |
| |
| static int ipath_dealloc_ucontext(struct ib_ucontext *context) |
| { |
| kfree(to_iucontext(context)); |
| return 0; |
| } |
| |
| static int ipath_verbs_register_sysfs(struct ib_device *dev); |
| |
| static void __verbs_timer(unsigned long arg) |
| { |
| struct ipath_devdata *dd = (struct ipath_devdata *) arg; |
| |
| /* Handle verbs layer timeouts. */ |
| ipath_ib_timer(dd->verbs_dev); |
| |
| mod_timer(&dd->verbs_timer, jiffies + 1); |
| } |
| |
| static int enable_timer(struct ipath_devdata *dd) |
| { |
| /* |
| * Early chips had a design flaw where the chip and kernel idea |
| * of the tail register don't always agree, and therefore we won't |
| * get an interrupt on the next packet received. |
| * If the board supports per packet receive interrupts, use it. |
| * Otherwise, the timer function periodically checks for packets |
| * to cover this case. |
| * Either way, the timer is needed for verbs layer related |
| * processing. |
| */ |
| if (dd->ipath_flags & IPATH_GPIO_INTR) { |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_debugportselect, |
| 0x2074076542310ULL); |
| /* Enable GPIO bit 2 interrupt */ |
| dd->ipath_gpio_mask |= (u64) (1 << IPATH_GPIO_PORT0_BIT); |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask, |
| dd->ipath_gpio_mask); |
| } |
| |
| init_timer(&dd->verbs_timer); |
| dd->verbs_timer.function = __verbs_timer; |
| dd->verbs_timer.data = (unsigned long)dd; |
| dd->verbs_timer.expires = jiffies + 1; |
| add_timer(&dd->verbs_timer); |
| |
| return 0; |
| } |
| |
| static int disable_timer(struct ipath_devdata *dd) |
| { |
| /* Disable GPIO bit 2 interrupt */ |
| if (dd->ipath_flags & IPATH_GPIO_INTR) { |
| /* Disable GPIO bit 2 interrupt */ |
| dd->ipath_gpio_mask &= ~((u64) (1 << IPATH_GPIO_PORT0_BIT)); |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask, |
| dd->ipath_gpio_mask); |
| /* |
| * We might want to undo changes to debugportselect, |
| * but how? |
| */ |
| } |
| |
| del_timer_sync(&dd->verbs_timer); |
| |
| return 0; |
| } |
| |
| /** |
| * ipath_register_ib_device - register our device with the infiniband core |
| * @dd: the device data structure |
| * Return the allocated ipath_ibdev pointer or NULL on error. |
| */ |
| int ipath_register_ib_device(struct ipath_devdata *dd) |
| { |
| struct ipath_verbs_counters cntrs; |
| struct ipath_ibdev *idev; |
| struct ib_device *dev; |
| struct ipath_verbs_txreq *tx; |
| unsigned i; |
| int ret; |
| |
| idev = (struct ipath_ibdev *)ib_alloc_device(sizeof *idev); |
| if (idev == NULL) { |
| ret = -ENOMEM; |
| goto bail; |
| } |
| |
| dev = &idev->ibdev; |
| |
| if (dd->ipath_sdma_descq_cnt) { |
| tx = kmalloc(dd->ipath_sdma_descq_cnt * sizeof *tx, |
| GFP_KERNEL); |
| if (tx == NULL) { |
| ret = -ENOMEM; |
| goto err_tx; |
| } |
| } else |
| tx = NULL; |
| idev->txreq_bufs = tx; |
| |
| /* Only need to initialize non-zero fields. */ |
| spin_lock_init(&idev->n_pds_lock); |
| spin_lock_init(&idev->n_ahs_lock); |
| spin_lock_init(&idev->n_cqs_lock); |
| spin_lock_init(&idev->n_qps_lock); |
| spin_lock_init(&idev->n_srqs_lock); |
| spin_lock_init(&idev->n_mcast_grps_lock); |
| |
| spin_lock_init(&idev->qp_table.lock); |
| spin_lock_init(&idev->lk_table.lock); |
| idev->sm_lid = __constant_be16_to_cpu(IB_LID_PERMISSIVE); |
| /* Set the prefix to the default value (see ch. 4.1.1) */ |
| idev->gid_prefix = __constant_cpu_to_be64(0xfe80000000000000ULL); |
| |
| ret = ipath_init_qp_table(idev, ib_ipath_qp_table_size); |
| if (ret) |
| goto err_qp; |
| |
| /* |
| * The top ib_ipath_lkey_table_size bits are used to index the |
| * table. The lower 8 bits can be owned by the user (copied from |
| * the LKEY). The remaining bits act as a generation number or tag. |
| */ |
| idev->lk_table.max = 1 << ib_ipath_lkey_table_size; |
| idev->lk_table.table = kzalloc(idev->lk_table.max * |
| sizeof(*idev->lk_table.table), |
| GFP_KERNEL); |
| if (idev->lk_table.table == NULL) { |
| ret = -ENOMEM; |
| goto err_lk; |
| } |
| INIT_LIST_HEAD(&idev->pending_mmaps); |
| spin_lock_init(&idev->pending_lock); |
| idev->mmap_offset = PAGE_SIZE; |
| spin_lock_init(&idev->mmap_offset_lock); |
| INIT_LIST_HEAD(&idev->pending[0]); |
| INIT_LIST_HEAD(&idev->pending[1]); |
| INIT_LIST_HEAD(&idev->pending[2]); |
| INIT_LIST_HEAD(&idev->piowait); |
| INIT_LIST_HEAD(&idev->rnrwait); |
| INIT_LIST_HEAD(&idev->txreq_free); |
| idev->pending_index = 0; |
| idev->port_cap_flags = |
| IB_PORT_SYS_IMAGE_GUID_SUP | IB_PORT_CLIENT_REG_SUP; |
| if (dd->ipath_flags & IPATH_HAS_LINK_LATENCY) |
| idev->port_cap_flags |= IB_PORT_LINK_LATENCY_SUP; |
| idev->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA; |
| idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA; |
| idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS; |
| idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS; |
| idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT; |
| |
| /* Snapshot current HW counters to "clear" them. */ |
| ipath_get_counters(dd, &cntrs); |
| idev->z_symbol_error_counter = cntrs.symbol_error_counter; |
| idev->z_link_error_recovery_counter = |
| cntrs.link_error_recovery_counter; |
| idev->z_link_downed_counter = cntrs.link_downed_counter; |
| idev->z_port_rcv_errors = cntrs.port_rcv_errors; |
| idev->z_port_rcv_remphys_errors = |
| cntrs.port_rcv_remphys_errors; |
| idev->z_port_xmit_discards = cntrs.port_xmit_discards; |
| idev->z_port_xmit_data = cntrs.port_xmit_data; |
| idev->z_port_rcv_data = cntrs.port_rcv_data; |
| idev->z_port_xmit_packets = cntrs.port_xmit_packets; |
| idev->z_port_rcv_packets = cntrs.port_rcv_packets; |
| idev->z_local_link_integrity_errors = |
| cntrs.local_link_integrity_errors; |
| idev->z_excessive_buffer_overrun_errors = |
| cntrs.excessive_buffer_overrun_errors; |
| idev->z_vl15_dropped = cntrs.vl15_dropped; |
| |
| for (i = 0; i < dd->ipath_sdma_descq_cnt; i++, tx++) |
| list_add(&tx->txreq.list, &idev->txreq_free); |
| |
| /* |
| * The system image GUID is supposed to be the same for all |
| * IB HCAs in a single system but since there can be other |
| * device types in the system, we can't be sure this is unique. |
| */ |
| if (!sys_image_guid) |
| sys_image_guid = dd->ipath_guid; |
| idev->sys_image_guid = sys_image_guid; |
| idev->ib_unit = dd->ipath_unit; |
| idev->dd = dd; |
| |
| strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX); |
| dev->owner = THIS_MODULE; |
| dev->node_guid = dd->ipath_guid; |
| dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION; |
| dev->uverbs_cmd_mask = |
| (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | |
| (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | |
| (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | |
| (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | |
| (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | |
| (1ull << IB_USER_VERBS_CMD_CREATE_AH) | |
| (1ull << IB_USER_VERBS_CMD_DESTROY_AH) | |
| (1ull << IB_USER_VERBS_CMD_QUERY_AH) | |
| (1ull << IB_USER_VERBS_CMD_REG_MR) | |
| (1ull << IB_USER_VERBS_CMD_DEREG_MR) | |
| (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | |
| (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | |
| (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) | |
| (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | |
| (1ull << IB_USER_VERBS_CMD_POLL_CQ) | |
| (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) | |
| (1ull << IB_USER_VERBS_CMD_CREATE_QP) | |
| (1ull << IB_USER_VERBS_CMD_QUERY_QP) | |
| (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | |
| (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | |
| (1ull << IB_USER_VERBS_CMD_POST_SEND) | |
| (1ull << IB_USER_VERBS_CMD_POST_RECV) | |
| (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | |
| (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | |
| (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | |
| (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | |
| (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | |
| (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) | |
| (1ull << IB_USER_VERBS_CMD_POST_SRQ_RECV); |
| dev->node_type = RDMA_NODE_IB_CA; |
| dev->phys_port_cnt = 1; |
| dev->num_comp_vectors = 1; |
| dev->dma_device = &dd->pcidev->dev; |
| dev->query_device = ipath_query_device; |
| dev->modify_device = ipath_modify_device; |
| dev->query_port = ipath_query_port; |
| dev->modify_port = ipath_modify_port; |
| dev->query_pkey = ipath_query_pkey; |
| dev->query_gid = ipath_query_gid; |
| dev->alloc_ucontext = ipath_alloc_ucontext; |
| dev->dealloc_ucontext = ipath_dealloc_ucontext; |
| dev->alloc_pd = ipath_alloc_pd; |
| dev->dealloc_pd = ipath_dealloc_pd; |
| dev->create_ah = ipath_create_ah; |
| dev->destroy_ah = ipath_destroy_ah; |
| dev->query_ah = ipath_query_ah; |
| dev->create_srq = ipath_create_srq; |
| dev->modify_srq = ipath_modify_srq; |
| dev->query_srq = ipath_query_srq; |
| dev->destroy_srq = ipath_destroy_srq; |
| dev->create_qp = ipath_create_qp; |
| dev->modify_qp = ipath_modify_qp; |
| dev->query_qp = ipath_query_qp; |
| dev->destroy_qp = ipath_destroy_qp; |
| dev->post_send = ipath_post_send; |
| dev->post_recv = ipath_post_receive; |
| dev->post_srq_recv = ipath_post_srq_receive; |
| dev->create_cq = ipath_create_cq; |
| dev->destroy_cq = ipath_destroy_cq; |
| dev->resize_cq = ipath_resize_cq; |
| dev->poll_cq = ipath_poll_cq; |
| dev->req_notify_cq = ipath_req_notify_cq; |
| dev->get_dma_mr = ipath_get_dma_mr; |
| dev->reg_phys_mr = ipath_reg_phys_mr; |
| dev->reg_user_mr = ipath_reg_user_mr; |
| dev->dereg_mr = ipath_dereg_mr; |
| dev->alloc_fmr = ipath_alloc_fmr; |
| dev->map_phys_fmr = ipath_map_phys_fmr; |
| dev->unmap_fmr = ipath_unmap_fmr; |
| dev->dealloc_fmr = ipath_dealloc_fmr; |
| dev->attach_mcast = ipath_multicast_attach; |
| dev->detach_mcast = ipath_multicast_detach; |
| dev->process_mad = ipath_process_mad; |
| dev->mmap = ipath_mmap; |
| dev->dma_ops = &ipath_dma_mapping_ops; |
| |
| snprintf(dev->node_desc, sizeof(dev->node_desc), |
| IPATH_IDSTR " %s", init_utsname()->nodename); |
| |
| ret = ib_register_device(dev, NULL); |
| if (ret) |
| goto err_reg; |
| |
| if (ipath_verbs_register_sysfs(dev)) |
| goto err_class; |
| |
| enable_timer(dd); |
| |
| goto bail; |
| |
| err_class: |
| ib_unregister_device(dev); |
| err_reg: |
| kfree(idev->lk_table.table); |
| err_lk: |
| kfree(idev->qp_table.table); |
| err_qp: |
| kfree(idev->txreq_bufs); |
| err_tx: |
| ib_dealloc_device(dev); |
| ipath_dev_err(dd, "cannot register verbs: %d!\n", -ret); |
| idev = NULL; |
| |
| bail: |
| dd->verbs_dev = idev; |
| return ret; |
| } |
| |
| void ipath_unregister_ib_device(struct ipath_ibdev *dev) |
| { |
| struct ib_device *ibdev = &dev->ibdev; |
| u32 qps_inuse; |
| |
| ib_unregister_device(ibdev); |
| |
| disable_timer(dev->dd); |
| |
| if (!list_empty(&dev->pending[0]) || |
| !list_empty(&dev->pending[1]) || |
| !list_empty(&dev->pending[2])) |
| ipath_dev_err(dev->dd, "pending list not empty!\n"); |
| if (!list_empty(&dev->piowait)) |
| ipath_dev_err(dev->dd, "piowait list not empty!\n"); |
| if (!list_empty(&dev->rnrwait)) |
| ipath_dev_err(dev->dd, "rnrwait list not empty!\n"); |
| if (!ipath_mcast_tree_empty()) |
| ipath_dev_err(dev->dd, "multicast table memory leak!\n"); |
| /* |
| * Note that ipath_unregister_ib_device() can be called before all |
| * the QPs are destroyed! |
| */ |
| qps_inuse = ipath_free_all_qps(&dev->qp_table); |
| if (qps_inuse) |
| ipath_dev_err(dev->dd, "QP memory leak! %u still in use\n", |
| qps_inuse); |
| kfree(dev->qp_table.table); |
| kfree(dev->lk_table.table); |
| kfree(dev->txreq_bufs); |
| ib_dealloc_device(ibdev); |
| } |
| |
| static ssize_t show_rev(struct device *device, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipath_ibdev *dev = |
| container_of(device, struct ipath_ibdev, ibdev.dev); |
| |
| return sprintf(buf, "%x\n", dev->dd->ipath_pcirev); |
| } |
| |
| static ssize_t show_hca(struct device *device, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipath_ibdev *dev = |
| container_of(device, struct ipath_ibdev, ibdev.dev); |
| int ret; |
| |
| ret = dev->dd->ipath_f_get_boardname(dev->dd, buf, 128); |
| if (ret < 0) |
| goto bail; |
| strcat(buf, "\n"); |
| ret = strlen(buf); |
| |
| bail: |
| return ret; |
| } |
| |
| static ssize_t show_stats(struct device *device, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipath_ibdev *dev = |
| container_of(device, struct ipath_ibdev, ibdev.dev); |
| int i; |
| int len; |
| |
| len = sprintf(buf, |
| "RC resends %d\n" |
| "RC no QACK %d\n" |
| "RC ACKs %d\n" |
| "RC SEQ NAKs %d\n" |
| "RC RDMA seq %d\n" |
| "RC RNR NAKs %d\n" |
| "RC OTH NAKs %d\n" |
| "RC timeouts %d\n" |
| "RC RDMA dup %d\n" |
| "piobuf wait %d\n" |
| "unaligned %d\n" |
| "PKT drops %d\n" |
| "WQE errs %d\n", |
| dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks, |
| dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks, |
| dev->n_other_naks, dev->n_timeouts, |
| dev->n_rdma_dup_busy, dev->n_piowait, dev->n_unaligned, |
| dev->n_pkt_drops, dev->n_wqe_errs); |
| for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) { |
| const struct ipath_opcode_stats *si = &dev->opstats[i]; |
| |
| if (!si->n_packets && !si->n_bytes) |
| continue; |
| len += sprintf(buf + len, "%02x %llu/%llu\n", i, |
| (unsigned long long) si->n_packets, |
| (unsigned long long) si->n_bytes); |
| } |
| return len; |
| } |
| |
| static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); |
| static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL); |
| static DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL); |
| static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL); |
| |
| static struct device_attribute *ipath_class_attributes[] = { |
| &dev_attr_hw_rev, |
| &dev_attr_hca_type, |
| &dev_attr_board_id, |
| &dev_attr_stats |
| }; |
| |
| static int ipath_verbs_register_sysfs(struct ib_device *dev) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i) |
| if (device_create_file(&dev->dev, |
| ipath_class_attributes[i])) { |
| ret = 1; |
| goto bail; |
| } |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |