diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e647378..b4f5487 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -119,6 +119,31 @@
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
 
+What:		/sys/bus/usb/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a USB device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time. The format for the device ID is:
+		idVendor idProduct bInterfaceClass.
+		The vendor ID and device ID fields are required, the
+		interface class is optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+What:		/sys/bus/usb-serial/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		For serial USB drivers, this attribute appears under the
+		extra bus folder "usb-serial" in sysfs; apart from that
+		difference, all descriptions from the entry
+		"/sys/bus/usb/drivers/.../new_id" apply.
+
 What:		/sys/bus/usb/drivers/.../remove_id
 Date:		November 2009
 Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a0c5c5f..72c68bb 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2632,6 +2632,10 @@
 			[USB] Start with the old device initialization
 			scheme (default 0 = off).
 
+	usbcore.usbfs_memory_mb=
+			[USB] Memory limit (in MB) for buffers allocated by
+			usbfs (default = 16, 0 = max = 2047).
+
 	usbcore.use_both_schemes=
 			[USB] Try the other device initialization scheme
 			if the first one fails (default 1 = enabled).
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 89f5244..0e8343f 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -212,11 +212,13 @@
 	 * The windows host expects the key/value pair to be encoded
 	 * in utf16.
 	 */
-	keylen = utf8s_to_utf16s(key_name, strlen(key_name),
-				(wchar_t *)kvp_data->data.key);
+	keylen = utf8s_to_utf16s(key_name, strlen(key_name), UTF16_HOST_ENDIAN,
+				(wchar_t *) kvp_data->data.key,
+				HV_KVP_EXCHANGE_MAX_KEY_SIZE / 2);
 	kvp_data->data.key_size = 2*(keylen + 1); /* utf16 encoding */
-	valuelen = utf8s_to_utf16s(value, strlen(value),
-				(wchar_t *)kvp_data->data.value);
+	valuelen = utf8s_to_utf16s(value, strlen(value), UTF16_HOST_ENDIAN,
+				(wchar_t *) kvp_data->data.value,
+				HV_KVP_EXCHANGE_MAX_VALUE_SIZE / 2);
 	kvp_data->data.value_size = 2*(valuelen + 1); /* utf16 encoding */
 
 	kvp_data->data.value_type = REG_SZ; /* all our values are strings */
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index d3e1356..75e47b8 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -271,7 +271,6 @@
 	if (int_status & SOFEOP_FLG(sie->sie_num)) {
 		c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
 		c67x00_sched_kick(c67x00);
-		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 	}
 }
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e3beaf2..d8cf06f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -86,6 +86,7 @@
 	void __user *userbuffer;
 	void __user *userurb;
 	struct urb *urb;
+	unsigned int mem_usage;
 	int status;
 	u32 secid;
 	u8 bulk_addr;
@@ -108,8 +109,44 @@
 
 #define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
 
-#define	MAX_USBFS_BUFFER_SIZE	16384
+/* Limit on the total amount of memory we can allocate for transfers */
+static unsigned usbfs_memory_mb = 16;
+module_param(usbfs_memory_mb, uint, 0644);
+MODULE_PARM_DESC(usbfs_memory_mb,
+		"maximum MB allowed for usbfs buffers (0 = no limit)");
 
+/* Hard limit, necessary to avoid aithmetic overflow */
+#define USBFS_XFER_MAX		(UINT_MAX / 2 - 1000000)
+
+static atomic_t usbfs_memory_usage;	/* Total memory currently allocated */
+
+/* Check whether it's okay to allocate more memory for a transfer */
+static int usbfs_increase_memory_usage(unsigned amount)
+{
+	unsigned lim;
+
+	/*
+	 * Convert usbfs_memory_mb to bytes, avoiding overflows.
+	 * 0 means use the hard limit (effectively unlimited).
+	 */
+	lim = ACCESS_ONCE(usbfs_memory_mb);
+	if (lim == 0 || lim > (USBFS_XFER_MAX >> 20))
+		lim = USBFS_XFER_MAX;
+	else
+		lim <<= 20;
+
+	atomic_add(amount, &usbfs_memory_usage);
+	if (atomic_read(&usbfs_memory_usage) <= lim)
+		return 0;
+	atomic_sub(amount, &usbfs_memory_usage);
+	return -ENOMEM;
+}
+
+/* Memory for a transfer is being deallocated */
+static void usbfs_decrease_memory_usage(unsigned amount)
+{
+	atomic_sub(amount, &usbfs_memory_usage);
+}
 
 static int connected(struct dev_state *ps)
 {
@@ -253,6 +290,7 @@
 	kfree(as->urb->transfer_buffer);
 	kfree(as->urb->setup_packet);
 	usb_free_urb(as->urb);
+	usbfs_decrease_memory_usage(as->mem_usage);
 	kfree(as);
 }
 
@@ -792,9 +830,15 @@
 	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */
 	if (wLength > PAGE_SIZE)
 		return -EINVAL;
+	ret = usbfs_increase_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	if (ret)
+		return ret;
 	tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
-	if (!tbuf)
-		return -ENOMEM;
+	if (!tbuf) {
+		ret = -ENOMEM;
+		goto done;
+	}
 	tmo = ctrl.timeout;
 	snoop(&dev->dev, "control urb: bRequestType=%02x "
 		"bRequest=%02x wValue=%04x "
@@ -806,8 +850,8 @@
 	if (ctrl.bRequestType & 0x80) {
 		if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
 					       ctrl.wLength)) {
-			free_page((unsigned long)tbuf);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto done;
 		}
 		pipe = usb_rcvctrlpipe(dev, 0);
 		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0);
@@ -821,15 +865,15 @@
 			  tbuf, max(i, 0));
 		if ((i > 0) && ctrl.wLength) {
 			if (copy_to_user(ctrl.data, tbuf, i)) {
-				free_page((unsigned long)tbuf);
-				return -EFAULT;
+				ret = -EFAULT;
+				goto done;
 			}
 		}
 	} else {
 		if (ctrl.wLength) {
 			if (copy_from_user(tbuf, ctrl.data, ctrl.wLength)) {
-				free_page((unsigned long)tbuf);
-				return -EFAULT;
+				ret = -EFAULT;
+				goto done;
 			}
 		}
 		pipe = usb_sndctrlpipe(dev, 0);
@@ -843,14 +887,18 @@
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
 	}
-	free_page((unsigned long)tbuf);
 	if (i < 0 && i != -EPIPE) {
 		dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
 			   "failed cmd %s rqt %u rq %u len %u ret %d\n",
 			   current->comm, ctrl.bRequestType, ctrl.bRequest,
 			   ctrl.wLength, i);
 	}
-	return i;
+	ret = i;
+ done:
+	free_page((unsigned long) tbuf);
+	usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	return ret;
 }
 
 static int proc_bulk(struct dev_state *ps, void __user *arg)
@@ -877,15 +925,20 @@
 	if (!usb_maxpacket(dev, pipe, !(bulk.ep & USB_DIR_IN)))
 		return -EINVAL;
 	len1 = bulk.len;
-	if (len1 > MAX_USBFS_BUFFER_SIZE)
+	if (len1 >= USBFS_XFER_MAX)
 		return -EINVAL;
-	if (!(tbuf = kmalloc(len1, GFP_KERNEL)))
-		return -ENOMEM;
+	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
+	if (ret)
+		return ret;
+	if (!(tbuf = kmalloc(len1, GFP_KERNEL))) {
+		ret = -ENOMEM;
+		goto done;
+	}
 	tmo = bulk.timeout;
 	if (bulk.ep & 0x80) {
 		if (len1 && !access_ok(VERIFY_WRITE, bulk.data, len1)) {
-			kfree(tbuf);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto done;
 		}
 		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
 
@@ -896,15 +949,15 @@
 
 		if (!i && len2) {
 			if (copy_to_user(bulk.data, tbuf, len2)) {
-				kfree(tbuf);
-				return -EFAULT;
+				ret = -EFAULT;
+				goto done;
 			}
 		}
 	} else {
 		if (len1) {
 			if (copy_from_user(tbuf, bulk.data, len1)) {
-				kfree(tbuf);
-				return -EFAULT;
+				ret = -EFAULT;
+				goto done;
 			}
 		}
 		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
@@ -914,10 +967,11 @@
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
 	}
+	ret = (i < 0 ? i : len2);
+ done:
 	kfree(tbuf);
-	if (i < 0)
-		return i;
-	return len2;
+	usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
+	return ret;
 }
 
 static int proc_resetep(struct dev_state *ps, void __user *arg)
@@ -1062,7 +1116,7 @@
 {
 	struct usbdevfs_iso_packet_desc *isopkt = NULL;
 	struct usb_host_endpoint *ep;
-	struct async *as;
+	struct async *as = NULL;
 	struct usb_ctrlrequest *dr = NULL;
 	unsigned int u, totlen, isofrmlen;
 	int ret, ifnum = -1;
@@ -1095,32 +1149,30 @@
 	}
 	if (!ep)
 		return -ENOENT;
+
+	u = 0;
 	switch(uurb->type) {
 	case USBDEVFS_URB_TYPE_CONTROL:
 		if (!usb_endpoint_xfer_control(&ep->desc))
 			return -EINVAL;
-		/* min 8 byte setup packet,
-		 * max 8 byte setup plus an arbitrary data stage */
-		if (uurb->buffer_length < 8 ||
-		    uurb->buffer_length > (8 + MAX_USBFS_BUFFER_SIZE))
+		/* min 8 byte setup packet */
+		if (uurb->buffer_length < 8)
 			return -EINVAL;
 		dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
 		if (!dr)
 			return -ENOMEM;
 		if (copy_from_user(dr, uurb->buffer, 8)) {
-			kfree(dr);
-			return -EFAULT;
+			ret = -EFAULT;
+			goto error;
 		}
 		if (uurb->buffer_length < (le16_to_cpup(&dr->wLength) + 8)) {
-			kfree(dr);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto error;
 		}
 		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
 				      le16_to_cpup(&dr->wIndex));
-		if (ret) {
-			kfree(dr);
-			return ret;
-		}
+		if (ret)
+			goto error;
 		uurb->number_of_packets = 0;
 		uurb->buffer_length = le16_to_cpup(&dr->wLength);
 		uurb->buffer += 8;
@@ -1138,6 +1190,7 @@
 			__le16_to_cpup(&dr->wValue),
 			__le16_to_cpup(&dr->wIndex),
 			__le16_to_cpup(&dr->wLength));
+		u = sizeof(struct usb_ctrlrequest);
 		break;
 
 	case USBDEVFS_URB_TYPE_BULK:
@@ -1151,8 +1204,6 @@
 			goto interrupt_urb;
 		}
 		uurb->number_of_packets = 0;
-		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
-			return -EINVAL;
 		break;
 
 	case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -1160,8 +1211,6 @@
 			return -EINVAL;
  interrupt_urb:
 		uurb->number_of_packets = 0;
-		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
-			return -EINVAL;
 		break;
 
 	case USBDEVFS_URB_TYPE_ISO:
@@ -1176,50 +1225,53 @@
 		if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
 			return -ENOMEM;
 		if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
-			kfree(isopkt);
-			return -EFAULT;
+			ret = -EFAULT;
+			goto error;
 		}
 		for (totlen = u = 0; u < uurb->number_of_packets; u++) {
 			/* arbitrary limit,
 			 * sufficient for USB 2.0 high-bandwidth iso */
 			if (isopkt[u].length > 8192) {
-				kfree(isopkt);
-				return -EINVAL;
+				ret = -EINVAL;
+				goto error;
 			}
 			totlen += isopkt[u].length;
 		}
-		/* 3072 * 64 microframes */
-		if (totlen > 196608) {
-			kfree(isopkt);
-			return -EINVAL;
-		}
+		u *= sizeof(struct usb_iso_packet_descriptor);
 		uurb->buffer_length = totlen;
 		break;
 
 	default:
 		return -EINVAL;
 	}
+
+	if (uurb->buffer_length >= USBFS_XFER_MAX) {
+		ret = -EINVAL;
+		goto error;
+	}
 	if (uurb->buffer_length > 0 &&
 			!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
 				uurb->buffer, uurb->buffer_length)) {
-		kfree(isopkt);
-		kfree(dr);
-		return -EFAULT;
+		ret = -EFAULT;
+		goto error;
 	}
 	as = alloc_async(uurb->number_of_packets);
 	if (!as) {
-		kfree(isopkt);
-		kfree(dr);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto error;
 	}
+	u += sizeof(struct async) + sizeof(struct urb) + uurb->buffer_length;
+	ret = usbfs_increase_memory_usage(u);
+	if (ret)
+		goto error;
+	as->mem_usage = u;
+
 	if (uurb->buffer_length > 0) {
 		as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
 				GFP_KERNEL);
 		if (!as->urb->transfer_buffer) {
-			kfree(isopkt);
-			kfree(dr);
-			free_async(as);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto error;
 		}
 		/* Isochronous input data may end up being discontiguous
 		 * if some of the packets are short.  Clear the buffer so
@@ -1253,6 +1305,7 @@
 
 	as->urb->transfer_buffer_length = uurb->buffer_length;
 	as->urb->setup_packet = (unsigned char *)dr;
+	dr = NULL;
 	as->urb->start_frame = uurb->start_frame;
 	as->urb->number_of_packets = uurb->number_of_packets;
 	if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
@@ -1268,6 +1321,7 @@
 		totlen += isopkt[u].length;
 	}
 	kfree(isopkt);
+	isopkt = NULL;
 	as->ps = ps;
 	as->userurb = arg;
 	if (is_in && uurb->buffer_length > 0)
@@ -1282,8 +1336,8 @@
 	if (!is_in && uurb->buffer_length > 0) {
 		if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
 				uurb->buffer_length)) {
-			free_async(as);
-			return -EFAULT;
+			ret = -EFAULT;
+			goto error;
 		}
 	}
 	snoop_urb(ps->dev, as->userurb, as->urb->pipe,
@@ -1329,10 +1383,16 @@
 		snoop_urb(ps->dev, as->userurb, as->urb->pipe,
 				0, ret, COMPLETE, NULL, 0);
 		async_removepending(as);
-		free_async(as);
-		return ret;
+		goto error;
 	}
 	return 0;
+
+ error:
+	kfree(isopkt);
+	kfree(dr);
+	if (as)
+		free_async(as);
+	return ret;
 }
 
 static int proc_submiturb(struct dev_state *ps, void __user *arg)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 45887a0..73abd8a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -45,10 +45,12 @@
 	struct usb_dynid *dynid;
 	u32 idVendor = 0;
 	u32 idProduct = 0;
+	unsigned int bInterfaceClass = 0;
 	int fields = 0;
 	int retval = 0;
 
-	fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
+	fields = sscanf(buf, "%x %x %x", &idVendor, &idProduct,
+					&bInterfaceClass);
 	if (fields < 2)
 		return -EINVAL;
 
@@ -60,6 +62,10 @@
 	dynid->id.idVendor = idVendor;
 	dynid->id.idProduct = idProduct;
 	dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+	if (fields == 3) {
+		dynid->id.bInterfaceClass = (u8)bInterfaceClass;
+		dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
+	}
 
 	spin_lock(&dynids->lock);
 	list_add_tail(&dynid->node, &dynids->list);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a004db3..d136b8f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -453,10 +453,6 @@
 
 	pci_set_master(pci_dev);
 
-	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-	if (hcd->shared_hcd)
-		clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
-
 	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
 		if (event != PM_EVENT_AUTO_RESUME)
 			wait_for_companions(pci_dev, hcd);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 13222d3..43a89e4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1168,20 +1168,6 @@
 	if (urb->unlinked)
 		return -EBUSY;
 	urb->unlinked = status;
-
-	/* IRQ setup can easily be broken so that USB controllers
-	 * never get completion IRQs ... maybe even the ones we need to
-	 * finish unlinking the initial failed usb_set_address()
-	 * or device descriptor fetch.
-	 */
-	if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
-		dev_warn(hcd->self.controller, "Unlink after no-IRQ?  "
-			"Controller is probably using the wrong IRQ.\n");
-		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-		if (hcd->shared_hcd)
-			set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
-	}
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
@@ -2148,16 +2134,12 @@
 	 */
 	local_irq_save(flags);
 
-	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
+	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
 		rc = IRQ_NONE;
-	} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+	else if (hcd->driver->irq(hcd) == IRQ_NONE)
 		rc = IRQ_NONE;
-	} else {
-		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-		if (hcd->shared_hcd)
-			set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
+	else
 		rc = IRQ_HANDLED;
-	}
 
 	local_irq_restore(flags);
 	return rc;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 3888778..45e8479 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -132,20 +132,6 @@
 			for_devices;
 }
 
-/* translate USB error codes to codes user space understands */
-static inline int usb_translate_errors(int error_code)
-{
-	switch (error_code) {
-	case 0:
-	case -ENOMEM:
-	case -ENODEV:
-		return error_code;
-	default:
-		return -EIO;
-	}
-}
-
-
 /* for labeling diagnostics */
 extern const char *usbcore_name;
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 23a4473..3162a7d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -15,6 +15,7 @@
 
 menuconfig USB_GADGET
 	tristate "USB Gadget Support"
+	select NLS
 	help
 	   USB is a master/slave protocol, organized with one master
 	   host (such as a PC) controlling up to 127 peripheral devices.
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 58c4d37..4d25b90 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -13,82 +13,17 @@
 #include <linux/string.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/nls.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-#include <asm/unaligned.h>
-
-
-static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
-{
-	int	count = 0;
-	u8	c;
-	u16	uchar;
-
-	/* this insists on correct encodings, though not minimal ones.
-	 * BUT it currently rejects legit 4-byte UTF-8 code points,
-	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
-	 */
-	while (len != 0 && (c = (u8) *s++) != 0) {
-		if (unlikely(c & 0x80)) {
-			// 2-byte sequence:
-			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-			if ((c & 0xe0) == 0xc0) {
-				uchar = (c & 0x1f) << 6;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c;
-
-			// 3-byte sequence (most CJKV characters):
-			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-			} else if ((c & 0xf0) == 0xe0) {
-				uchar = (c & 0x0f) << 12;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c << 6;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c;
-
-				/* no bogus surrogates */
-				if (0xd800 <= uchar && uchar <= 0xdfff)
-					goto fail;
-
-			// 4-byte sequence (surrogate pairs, currently rare):
-			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-			// (uuuuu = wwww + 1)
-			// FIXME accept the surrogate code points (only)
-
-			} else
-				goto fail;
-		} else
-			uchar = c;
-		put_unaligned_le16(uchar, cp++);
-		count++;
-		len--;
-	}
-	return count;
-fail:
-	return -1;
-}
-
 
 /**
  * usb_gadget_get_string - fill out a string descriptor 
  * @table: of c strings encoded using UTF-8
  * @id: string id, from low byte of wValue in get string descriptor
- * @buf: at least 256 bytes
+ * @buf: at least 256 bytes, must be 16-bit aligned
  *
  * Finds the UTF-8 string matching the ID, and converts it into a
  * string descriptor in utf16-le.
@@ -125,8 +60,8 @@
 
 	/* string descriptors have length, tag, then UTF16-LE text */
 	len = min ((size_t) 126, strlen (s->s));
-	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
-	len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
+	len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
+			(wchar_t *) &buf[2], 126);
 	if (len < 0)
 		return -EINVAL;
 	buf [0] = (len + 1) * 2;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 3ff9f82..0f15d39 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1324,7 +1324,7 @@
 #define PLATFORM_DRIVER		ehci_pxa168_driver
 #endif
 
-#ifdef CONFIG_NLM_XLR
+#ifdef CONFIG_CPU_XLR
 #include "ehci-xls.c"
 #define PLATFORM_DRIVER		ehci_xls_driver
 #endif
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4e4066c..f136f7f1 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -373,6 +373,17 @@
  retry_xacterr:
 		if ((token & QTD_STS_ACTIVE) == 0) {
 
+			/* Report Data Buffer Error: non-fatal but useful */
+			if (token & QTD_STS_DBE)
+				ehci_dbg(ehci,
+					"detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+					urb,
+					usb_endpoint_num(&urb->ep->desc),
+					usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
+					urb->transfer_buffer_length,
+					qtd,
+					qh);
+
 			/* on STALL, error, and short reads this urb must
 			 * complete and all its qtds must be recycled.
 			 */
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 024b65c..8aac020 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -14,8 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <plat/cpu.h>
 #include <plat/ehci.h>
 #include <plat/usb-phy.h>
 
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
index b4fb511..72f0819 100644
--- a/drivers/usb/host/ehci-xls.c
+++ b/drivers/usb/host/ehci-xls.c
@@ -69,7 +69,7 @@
 	}
 
 	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = res->end - res->start + 1;
+	hcd->rsrc_len = resource_size(res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 				driver->description)) {
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 9bfac65..565d79f 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -776,7 +776,6 @@
 		goto error_alloc;
 	}
 	usb_hcd->wireless = 1;
-	set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags);
 	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
 	hwahc_init(hwahc);
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 9b66df8..40d886a 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -173,12 +173,9 @@
 	 * mark HW unaccessible, bail out if RH has been resumed. Use
 	 * the spinlock to properly synchronize with possible pending
 	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
 	 */
 	spin_lock_irqsave(&ohci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
+	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 		rc = -EINVAL;
 		goto bail;
 	}
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index d7d3449..5179fcd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -127,6 +127,19 @@
 	return "?";
 }
 
+static const char *rh_state_string(struct ohci_hcd *ohci)
+{
+	switch (ohci->rh_state) {
+	case OHCI_RH_HALTED:
+		return "halted";
+	case OHCI_RH_SUSPENDED:
+		return "suspended";
+	case OHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
 // dump control and status registers
 static void
 ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
@@ -136,9 +149,10 @@
 
 	temp = ohci_readl (controller, &regs->revision) & 0xff;
 	ohci_dbg_sw (controller, next, size,
-		"OHCI %d.%d, %s legacy support registers\n",
+		"OHCI %d.%d, %s legacy support registers, rh state %s\n",
 		0x03 & (temp >> 4), (temp & 0x0f),
-		(temp & 0x0100) ? "with" : "NO");
+		(temp & 0x0100) ? "with" : "NO",
+		rh_state_string(controller));
 
 	temp = ohci_readl (controller, &regs->control);
 	ohci_dbg_sw (controller, next, size,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index dc45d48..3d63574 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -179,8 +179,6 @@
 	ohci->next_statechange = jiffies;
 
 	ep93xx_stop_hc(&pdev->dev);
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b263919..4fa5d8c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -209,7 +209,7 @@
 		retval = -ENODEV;
 		goto fail;
 	}
-	if (!HC_IS_RUNNING(hcd->state)) {
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
 		retval = -ENODEV;
 		goto fail;
 	}
@@ -274,7 +274,7 @@
 	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 	if (rc) {
 		;	/* Do nothing */
-	} else if (HC_IS_RUNNING(hcd->state)) {
+	} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 		urb_priv_t  *urb_priv;
 
 		/* Unless an IRQ completed the unlink while it was being
@@ -321,7 +321,7 @@
 rescan:
 	spin_lock_irqsave (&ohci->lock, flags);
 
-	if (!HC_IS_RUNNING (hcd->state)) {
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
 sanitize:
 		ed->state = ED_IDLE;
 		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
@@ -377,6 +377,7 @@
 	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 	ohci->hc_control &= OHCI_CTRL_RWC;
 	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	ohci->rh_state = OHCI_RH_HALTED;
 }
 
 /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
@@ -500,7 +501,7 @@
 	if (distrust_firmware)
 		ohci->flags |= OHCI_QUIRK_HUB_POWER;
 
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 	ohci->regs = hcd->regs;
 
 	/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
@@ -575,7 +576,7 @@
 	int			first = ohci->fminterval == 0;
 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
 
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 
 	/* boot firmware should have set this up (5.1.1.3.1) */
 	if (first) {
@@ -688,7 +689,7 @@
 	ohci->hc_control &= OHCI_CTRL_RWC;
 	ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
-	hcd->state = HC_STATE_RUNNING;
+	ohci->rh_state = OHCI_RH_RUNNING;
 
 	/* wake on ConnectStatusChange, matching external hubs */
 	ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@@ -725,7 +726,6 @@
 
 	// POTPGT delay is bits 24-31, in 2 ms units.
 	mdelay ((val >> 23) & 0x1fe);
-	hcd->state = HC_STATE_RUNNING;
 
 	if (quirk_zfmicro(ohci)) {
 		/* Create timer to watch for bad queue state on ZF Micro */
@@ -761,7 +761,7 @@
 	 * of dead, unclocked, or unplugged (CardBus...) devices
 	 */
 	if (ints == ~(u32)0) {
-		disable (ohci);
+		ohci->rh_state = OHCI_RH_HALTED;
 		ohci_dbg (ohci, "device removed!\n");
 		usb_hc_died(hcd);
 		return IRQ_HANDLED;
@@ -771,7 +771,7 @@
 	ints &= ohci_readl(ohci, &regs->intrenable);
 
 	/* interrupt for some other device? */
-	if (ints == 0 || unlikely(hcd->state == HC_STATE_HALT))
+	if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
 		return IRQ_NOTMINE;
 
 	if (ints & OHCI_INTR_UE) {
@@ -786,8 +786,8 @@
 
 			schedule_work (&ohci->nec_work);
 		} else {
-			disable (ohci);
 			ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
+			ohci->rh_state = OHCI_RH_HALTED;
 			usb_hc_died(hcd);
 		}
 
@@ -871,11 +871,11 @@
 	if ((ints & OHCI_INTR_SF) != 0
 			&& !ohci->ed_rm_list
 			&& !ohci->ed_to_check
-			&& HC_IS_RUNNING(hcd->state))
+			&& ohci->rh_state == OHCI_RH_RUNNING)
 		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 	spin_unlock (&ohci->lock);
 
-	if (HC_IS_RUNNING(hcd->state)) {
+	if (ohci->rh_state == OHCI_RH_RUNNING) {
 		ohci_writel (ohci, ints, &regs->intrstatus);
 		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 		// flush those writes
@@ -929,7 +929,7 @@
 	struct urb_priv *priv;
 
 	spin_lock_irq(&ohci->lock);
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 
 	/* Recycle any "live" eds/tds (and urbs). */
 	if (!list_empty (&ohci->pending))
@@ -1111,7 +1111,7 @@
 #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
 #endif
 
-#ifdef CONFIG_NLM_XLR
+#ifdef CONFIG_CPU_XLR
 #include "ohci-xls.c"
 #define PLATFORM_DRIVER		ohci_xls_driver
 #endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2f00040..836772d 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -111,6 +111,7 @@
 	if (!autostop) {
 		ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 		ohci->autostop = 0;
+		ohci->rh_state = OHCI_RH_SUSPENDED;
 	}
 
 done:
@@ -140,7 +141,7 @@
 
 	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 		/* this can happen after resuming a swsusp snapshot */
-		if (hcd->state == HC_STATE_RESUMING) {
+		if (ohci->rh_state != OHCI_RH_RUNNING) {
 			ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
 					ohci->hc_control);
 			status = -EBUSY;
@@ -274,6 +275,7 @@
 		(void) ohci_readl (ohci, &ohci->regs->control);
 	}
 
+	ohci->rh_state = OHCI_RH_RUNNING;
 	return 0;
 }
 
@@ -336,11 +338,8 @@
 	/* If needed, reinitialize and suspend the root hub */
 	if (need_reinit) {
 		spin_lock_irq(&ohci->lock);
-		hcd->state = HC_STATE_RESUMING;
 		ohci_rh_resume(ohci);
-		hcd->state = HC_STATE_QUIESCING;
 		ohci_rh_suspend(ohci, 0);
-		hcd->state = HC_STATE_SUSPENDED;
 		spin_unlock_irq(&ohci->lock);
 	}
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e4b8782..db39686 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -516,7 +516,6 @@
 	ohci->next_statechange = jiffies;
 
 	omap_ohci_clock_power(0);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index bc01b06..6109810 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -308,12 +308,9 @@
 	 * mark HW unaccessible, bail out if RH has been resumed. Use
 	 * the spinlock to properly synchronize with possible pending
 	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
 	 */
 	spin_lock_irqsave (&ohci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
+	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 		rc = -EINVAL;
 		goto bail;
 	}
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 29dfefe..6313e44 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -502,8 +502,6 @@
 	ohci->ohci.next_statechange = jiffies;
 
 	pxa27x_stop_hc(ohci, dev);
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 15dc51d..c5a1ea9 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -912,7 +912,7 @@
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
-		if (likely (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))) {
+		if (likely(ohci->rh_state == OHCI_RH_RUNNING)) {
 			if (tick_before (tick, ed->tick)) {
 skip_ed:
 				last = &ed->ed_next;
@@ -1012,7 +1012,7 @@
 
 		/* but if there's work queued, reschedule */
 		if (!list_empty (&ed->td_list)) {
-			if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))
+			if (ohci->rh_state == OHCI_RH_RUNNING)
 				ed_schedule (ohci, ed);
 		}
 
@@ -1021,9 +1021,7 @@
 	}
 
 	/* maybe reenable control and bulk lists */
-	if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
-			&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
-			&& !ohci->ed_rm_list) {
+	if (ohci->rh_state == OHCI_RH_RUNNING && !ohci->ed_rm_list) {
 		u32	command = 0, control = 0;
 
 		if (ohci->ed_controltail) {
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index afc4eb6..84686d9 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -29,7 +29,6 @@
 	ohci_hcd_init(ohci);
 	ohci_init(ohci);
 	ohci_run(ohci);
-	hcd->state = HC_STATE_RUNNING;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 968cea2..5596ac2 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -224,7 +224,6 @@
 	ohci->next_statechange = jiffies;
 
 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 6987465..95c1648 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -203,7 +203,6 @@
 	ohci->next_statechange = jiffies;
 
 	spear_stop_ohci(ohci_p);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 06331d9..120bfe6 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -318,9 +318,6 @@
 		if (ret)
 			return ret;
 	}
-
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index a3a9c6f..a224786 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -40,7 +40,7 @@
 		goto err1;
 	}
 	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = res->end - res->start + 1;
+	hcd->rsrc_len = resource_size(res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 			driver->description)) {
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 0795b93..8ff6f7e 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -344,6 +344,12 @@
  * a subset of what the full implementation needs. (Linus)
  */
 
+enum ohci_rh_state {
+	OHCI_RH_HALTED,
+	OHCI_RH_SUSPENDED,
+	OHCI_RH_RUNNING
+};
+
 struct ohci_hcd {
 	spinlock_t		lock;
 
@@ -384,6 +390,7 @@
 	/*
 	 * driver state
 	 */
+	enum ohci_rh_state	rh_state;
 	int			num_ports;
 	int			load [NUM_INTS];
 	u32			hc_control;	/* copy of hc control reg */
@@ -679,11 +686,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static inline void disable (struct ohci_hcd *ohci)
-{
-	ohci_to_hcd(ohci)->state = HC_STATE_HALT;
-}
-
 #define	FI			0x2edf		/* 12000 bits per frame (-1) */
 #define	FSMP(fi)		(0x7fff & ((6 * ((fi) - 210)) / 7))
 #define	FIT			(1 << 31)
@@ -707,7 +709,7 @@
 #define read_roothub(hc, register, mask) ({ \
 	u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
 	if (temp == -1) \
-		disable (hc); \
+		hc->rh_state = OHCI_RH_HALTED; \
 	else if (hc->flags & OHCI_QUIRK_AMD756) \
 		while (temp & mask) \
 			temp = ohci_readl (hc, &hc->regs->roothub.register); \
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f1d4b1..133ce30 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2390,17 +2390,7 @@
 
 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
 {
-	irqreturn_t ret;
-	struct xhci_hcd *xhci;
-
-	xhci = hcd_to_xhci(hcd);
-	set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-	if (xhci->shared_hcd)
-		set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags);
-
-	ret = xhci_irq(hcd);
-
-	return ret;
+	return xhci_irq(hcd);
 }
 
 /****		Endpoint Ring Operations	****/
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c1fa12e..54958508 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -661,7 +661,6 @@
 
 		handled = IRQ_HANDLED;
 		musb->is_active = 1;
-		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
 		musb->ep0_stage = MUSB_EP0_START;
 
diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history
deleted file mode 100644
index f13fd48..0000000
--- a/drivers/usb/serial/ChangeLog.history
+++ /dev/null
@@ -1,730 +0,0 @@
-This is the contents of some of the drivers/usb/serial/ files that had  old
-changelog comments.  They were quite old, and out of date, and we don't keep
-them anymore, so I've put them here, away from the source files, in case
-people still care to see them.
-
-- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
-
------------------------------------------------------------------------
-usb-serial.h Change Log comments:
-
- (03/26/2002) gkh
-	removed the port->tty check from port_paranoia_check() due to serial
-	consoles not having a tty device assigned to them.
-
- (12/03/2001) gkh
-	removed active from the port structure.
-	added documentation to the usb_serial_device_type structure
-
- (10/10/2001) gkh
-	added vendor and product to serial structure.  Needed to determine device
-	owner when the device is disconnected.
-
- (05/30/2001) gkh
-	added sem to port structure and removed port_lock
-
- (10/05/2000) gkh
-	Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
-	fix bug with urb->dev not being set properly, now that the usb core
-	needs it.
-
- (09/11/2000) gkh
-	Added usb_serial_debug_data function to help get rid of #DEBUG in the
-	drivers.
-
- (08/28/2000) gkh
-	Added port_lock to port structure.
-
- (08/08/2000) gkh
-	Added open_count to port structure.
-
- (07/23/2000) gkh
-	Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
-	Modifications to allow usb-serial drivers to be modules.
-
------------------------------------------------------------------------
-usb-serial.c Change Log comments:
-
- (12/10/2002) gkh
-	Split the ports off into their own struct device, and added a
-	usb-serial bus driver.
-
- (11/19/2002) gkh
-	removed a few #ifdefs for the generic code and cleaned up the failure
-	logic in initialization.
-
- (10/02/2002) gkh
-	moved the console code to console.c and out of this file.
-
- (06/05/2002) gkh
-	moved location of startup() call in serial_probe() until after all
-	of the port information and endpoints are initialized.  This makes
-	things easier for some drivers.
-
- (04/10/2002) gkh
-	added serial_read_proc function which creates a
-	/proc/tty/driver/usb-serial file.
-
- (03/27/2002) gkh
-	Got USB serial console code working properly and merged into the main
-	version of the tree.  Thanks to Randy Dunlap for the initial version
-	of this code, and for pushing me to finish it up.
-	The USB serial console works with any usb serial driver device.
-
- (03/21/2002) gkh
-	Moved all manipulation of port->open_count into the core.  Now the
-	individual driver's open and close functions are called only when the
-	first open() and last close() is called.  Making the drivers a bit
-	smaller and simpler.
-	Fixed a bug if a driver didn't have the owner field set.
-
- (02/26/2002) gkh
-	Moved all locking into the main serial_* functions, instead of having
-	the individual drivers have to grab the port semaphore.  This should
-	reduce races.
-	Reworked the MOD_INC logic a bit to always increment and decrement, even
-	if the generic driver is being used.
-
- (10/10/2001) gkh
-	usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
-	help prevent child drivers from accessing the device since it is now
-	gone.
-
- (09/13/2001) gkh
-	Moved generic driver initialize after we have registered with the USB
-	core.  Thanks to Randy Dunlap for pointing this problem out.
-
- (07/03/2001) gkh
-	Fixed module paramater size.  Thanks to John Brockmeyer for the pointer.
-	Fixed vendor and product getting defined through the MODULE_PARM macro
-	if the Generic driver wasn't compiled in.
-	Fixed problem with generic_shutdown() not being called for drivers that
-	don't have a shutdown() function.
-
- (06/06/2001) gkh
-	added evil hack that is needed for the prolific pl2303 device due to the
-	crazy way its endpoints are set up.
-
- (05/30/2001) gkh
-	switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (04/08/2001) gb
-	Identify version on module load.
-
- 2001_02_05 gkh
-	Fixed buffer overflows bug with the generic serial driver.  Thanks to
-	Todd Squires <squirest@ct0.com> for fixing this.
-
- (01/10/2001) gkh
-	Fixed bug where the generic serial adaptor grabbed _any_ device that was
-	offered to it.
-
- (12/12/2000) gkh
-	Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
-	moved them to the serial_open and serial_close functions.
-	Also fixed bug with there not being a MOD_DEC for the generic driver
-	(thanks to Gary Brubaker for finding this.)
-
- (11/29/2000) gkh
-	Small NULL pointer initialization cleanup which saves a bit of disk image
-
- (11/01/2000) Adam J. Richter
-	instead of using idVendor/idProduct pairs, usb serial drivers
-	now identify their hardware interest with usb_device_id tables,
-	which they usually have anyhow for use with MODULE_DEVICE_TABLE.
-
- (10/05/2000) gkh
-	Fixed bug with urb->dev not being set properly, now that the usb
-	core needs it.
-
- (09/11/2000) gkh
-	Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (08/28/2000) gkh
-	Added port_lock to port structure.
-	Added locks for SMP safeness to generic driver
-	Fixed the ability to open a generic device's port more than once.
-
- (07/23/2000) gkh
-	Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
-	Modifications to allow usb-serial drivers to be modules.
-
- (07/03/2000) gkh
-	Added more debugging to serial_ioctl call
-
- (06/25/2000) gkh
-	Changed generic_write_bulk_callback to not call wake_up_interruptible
-	directly, but to have port_softint do it at a safer time.
-
- (06/23/2000) gkh
-	Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (05/22/2000) gkh
-	Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
-	removed from the individual device source files.
-
- (05/03/2000) gkh
-	Added the Digi Acceleport driver from Al Borchers and Peter Berger.
-
- (05/02/2000) gkh
-	Changed devfs and tty register code to work properly now. This was based on
-	the ACM driver changes by Vojtech Pavlik.
-
- (04/27/2000) Ryan VanderBijl
- 	Put calls to *_paranoia_checks into one function.
-
- (04/23/2000) gkh
-	Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
-	Moved when the startup code printed out the devices that are supported.
-
- (04/19/2000) gkh
-	Added driver for ZyXEL omni.net lcd plus ISDN TA
-	Made startup info message specify which drivers were compiled in.
-
- (04/03/2000) gkh
-	Changed the probe process to remove the module unload races.
-	Changed where the tty layer gets initialized to have devfs work nicer.
-	Added initial devfs support.
-
- (03/26/2000) gkh
-	Split driver up into device specific pieces.
-
- (03/19/2000) gkh
-	Fixed oops that could happen when device was removed while a program
-	was talking to the device.
-	Removed the static urbs and now all urbs are created and destroyed
-	dynamically.
-	Reworked the internal interface. Now everything is based on the
-	usb_serial_port structure instead of the larger usb_serial structure.
-	This fixes the bug that a multiport device could not have more than
-	one port open at one time.
-
- (03/17/2000) gkh
-	Added config option for debugging messages.
-	Added patch for keyspan pda from Brian Warner.
-
- (03/06/2000) gkh
-	Added the keyspan pda code from Brian Warner <warner@lothar.com>
-	Moved a bunch of the port specific stuff into its own structure. This
-	is in anticipation of the true multiport devices (there's a bug if you
-	try to access more than one port of any multiport device right now)
-
- (02/21/2000) gkh
-	Made it so that any serial devices only have to specify which functions
-	they want to overload from the generic function calls (great,
-	inheritance in C, in a driver, just what I wanted...)
-	Added support for set_termios and ioctl function calls. No drivers take
-	advantage of this yet.
-	Removed the #ifdef MODULE, now there is no module specific code.
-	Cleaned up a few comments in usb-serial.h that were wrong (thanks again
-	to Miles Lott).
-	Small fix to get_free_serial.
-
- (02/14/2000) gkh
-	Removed the Belkin and Peracom functionality from the driver due to
-	the lack of support from the vendor, and me not wanting people to
-	accidenatly buy the device, expecting it to work with Linux.
-	Added read_bulk_callback and write_bulk_callback to the type structure
-	for the needs of the FTDI and WhiteHEAT driver.
-	Changed all reverences to FTDI to FTDI_SIO at the request of Bill
-	Ryder.
-	Changed the output urb size back to the max endpoint size to make
-	the ftdi_sio driver have it easier, and due to the fact that it didn't
-	really increase the speed any.
-
- (02/11/2000) gkh
-	Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
-	patch from Miles Lott (milos@insync.net).
-	Fixed bug with not restoring the minor range that a device grabs, if
-	the startup function fails (thanks Miles for finding this).
-
- (02/05/2000) gkh
-	Added initial framework for the Keyspan PDA serial converter so that
-	Brian Warner has a place to put his code.
-	Made the ezusb specific functions generic enough that different
-	devices can use them (whiteheat and keyspan_pda both need them).
-	Split out a whole bunch of structure and other stuff to a separate
-	usb-serial.h file.
-	Made the Visor connection messages a little more understandable, now
-	that Miles Lott (milos@insync.net) has gotten the Generic channel to
-	work. Also made them always show up in the log file.
-
- (01/25/2000) gkh
-	Added initial framework for FTDI serial converter so that Bill Ryder
-	has a place to put his code.
-	Added the vendor specific info from Handspring. Now we can print out
-	informational debug messages as well as understand what is happening.
-
- (01/23/2000) gkh
-	Fixed problem of crash when trying to open a port that didn't have a
-	device assigned to it. Made the minor node finding a little smarter,
-	now it looks to find a continuous space for the new device.
-
- (01/21/2000) gkh
-	Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
-	Fixed get_serial_by_minor which was all messed up for multi port
-	devices. Fixed multi port problem for generic devices. Now the number
-	of ports is determined by the number of bulk out endpoints for the
-	generic device.
-
- (01/19/2000) gkh
-	Removed lots of cruft that was around from the old (pre urb) driver
-	interface.
-	Made the serial_table dynamic. This should save lots of memory when
-	the number of minor nodes goes up to 256.
-	Added initial support for devices that have more than one port.
-	Added more debugging comments for the Visor, and added a needed
-	set_configuration call.
-
- (01/17/2000) gkh
-	Fixed the WhiteHEAT firmware (my processing tool had a bug)
-	and added new debug loader firmware for it.
-	Removed the put_char function as it isn't really needed.
-	Added visor startup commands as found by the Win98 dump.
-
- (01/13/2000) gkh
-	Fixed the vendor id for the generic driver to the one I meant it to be.
-
- (01/12/2000) gkh
-	Forget the version numbering...that's pretty useless...
-	Made the driver able to be compiled so that the user can select which
-	converter they want to use. This allows people who only want the Visor
-	support to not pay the memory size price of the WhiteHEAT.
-	Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
-	grabbed the root hub. Not good.
-
- version 0.4.0 (01/10/2000) gkh
-	Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
-	device. Added startup function to allow firmware to be downloaded to
-	a device if it needs to be.
-	Added firmware download logic to the WhiteHEAT device.
-	Started to add #defines to split up the different drivers for potential
-	configuration option.
-
- version 0.3.1 (12/30/99) gkh
-      Fixed problems with urb for bulk out.
-      Added initial support for multiple sets of endpoints. This enables
-      the Handspring Visor to be attached successfully. Only the first
-      bulk in / bulk out endpoint pair is being used right now.
-
- version 0.3.0 (12/27/99) gkh
-	Added initial support for the Handspring Visor based on a patch from
-	Miles Lott (milos@sneety.insync.net)
-	Cleaned up the code a bunch and converted over to using urbs only.
-
- version 0.2.3 (12/21/99) gkh
-	Added initial support for the Connect Tech WhiteHEAT converter.
-	Incremented the number of ports in expectation of getting the
-	WhiteHEAT to work properly (4 ports per connection).
-	Added notification on insertion and removal of what port the
-	device is/was connected to (and what kind of device it was).
-
- version 0.2.2 (12/16/99) gkh
-	Changed major number to the new allocated number. We're legal now!
-
- version 0.2.1 (12/14/99) gkh
-	Fixed bug that happens when device node is opened when there isn't a
-	device attached to it. Thanks to marek@webdesign.no for noticing this.
-
- version 0.2.0 (11/10/99) gkh
-	Split up internals to make it easier to add different types of serial
-	converters to the code.
-	Added a "generic" driver that gets it's vendor and product id
-	from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
-	for the idea and sample code (from the usb scanner driver.)
-	Cleared up any licensing questions by releasing it under the GNU GPL.
-
- version 0.1.2 (10/25/99) gkh
- 	Fixed bug in detecting device.
-
- version 0.1.1 (10/05/99) gkh
- 	Changed the major number to not conflict with anything else.
-
- version 0.1 (09/28/99) gkh
- 	Can recognize the two different devices and start up a read from
-	device when asked to. Writes also work. No control signals yet, this
-	all is vendor specific data (i.e. no spec), also no control for
-	different baud rates or other bit settings.
-	Currently we are using the same devid as the acm driver. This needs
-	to change.
-
------------------------------------------------------------------------
-visor.c Change Log comments:
-
- (06/03/2003) Judd Montgomery <judd at jpilot.org>
-     Added support for module parameter options for untested/unknown
-     devices.
-
- (03/09/2003) gkh
-	Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
-	<brachtl@redgrep.cz> for the information.
-
- (03/05/2003) gkh
-	Think Treo support is now working.
-
- (04/03/2002) gkh
-	Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
-	<hiro@zob.ne.jp> for the information.
-
- (03/27/2002) gkh
-	Removed assumptions that port->tty was always valid (is not true
-	for usb serial console devices.)
-
- (03/23/2002) gkh
-	Added support for the Palm i705 device, thanks to Thomas Riemer
-	<tom@netmech.com> for the information.
-
- (03/21/2002) gkh
-	Added support for the Palm m130 device, thanks to Udo Eisenbarth
-	<udo.eisenbarth@web.de> for the information.
-
- (02/27/2002) gkh
-	Reworked the urb handling logic.  We have no more pool, but dynamically
-	allocate the urb and the transfer buffer on the fly.  In testing this
-	does not incure any measurable overhead.  This also relies on the fact
-	that we have proper reference counting logic for urbs.
-
- (02/21/2002) SilaS
-  Added initial support for the Palm m515 devices.
-
- (02/14/2002) gkh
-	Added support for the Clie S-360 device.
-
- (12/18/2001) gkh
-	Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
-	for the patch.
-
- (11/11/2001) gkh
-	Added support for the m125 devices, and added check to prevent oopses
-	for Clié devices that lie about the number of ports they have.
-
- (08/30/2001) gkh
-	Added support for the Clie devices, both the 3.5 and 4.0 os versions.
-	Many thanks to Daniel Burke, and Bryan Payne for helping with this.
-
- (08/23/2001) gkh
-	fixed a few potential bugs pointed out by Oliver Neukum.
-
- (05/30/2001) gkh
-	switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (05/28/2000) gkh
-	Added initial support for the Palm m500 and Palm m505 devices.
-
- (04/08/2001) gb
-	Identify version on module load.
-
- (01/21/2000) gkh
-	Added write_room and chars_in_buffer, as they were previously using the
-	generic driver versions which is all wrong now that we are using an urb
-	pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
-	Removed count assignment in the write function, which was not needed anymore
-	either.  Thanks to Al Borchers for pointing this out.
-
- (12/12/2000) gkh
-	Moved MOD_DEC to end of visor_close to be nicer, as the final write
-	message can sleep.
-
- (11/12/2000) gkh
-	Fixed bug with data being dropped on the floor by forcing tty->low_latency
-	to be on.  Hopefully this fixes the OHCI issue!
-
- (11/01/2000) Adam J. Richter
-	usb_device_id table support
-
- (10/05/2000) gkh
-	Fixed bug with urb->dev not being set properly, now that the usb
-	core needs it.
-
- (09/11/2000) gkh
-	Got rid of always calling kmalloc for every urb we wrote out to the
-	device.
-	Added visor_read_callback so we can keep track of bytes in and out for
-	those people who like to know the speed of their device.
-	Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (09/06/2000) gkh
-	Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
-	the host controller drivers set urb->dev = NULL when the urb is finished.
-
- (08/28/2000) gkh
-	Added locks for SMP safeness.
-
- (08/08/2000) gkh
-	Fixed endian problem in visor_startup.
-	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
-	than once.
-
- (07/23/2000) gkh
-	Added pool of write urbs to speed up transfers to the visor.
-
- (07/19/2000) gkh
-	Added module_init and module_exit functions to handle the fact that this
-	driver is a loadable module now.
-
- (07/03/2000) gkh
-	Added visor_set_ioctl and visor_set_termios functions (they don't do much
-	of anything, but are good for debugging.)
-
- (06/25/2000) gkh
-	Fixed bug in visor_unthrottle that should help with the disconnect in PPP
-	bug that people have been reporting.
-
- (06/23/2000) gkh
-	Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (04/27/2000) Ryan VanderBijl
- 	Fixed memory leak in visor_close
-
- (03/26/2000) gkh
-	Split driver up into device specific pieces.
-
------------------------------------------------------------------------
-pl2303.c Change Log comments:
-
- 2002_Mar_26 gkh
-	allowed driver to work properly if there is no tty assigned to a port
-	(this happens for serial console devices.)
-
- 2001_Oct_06 gkh
-	Added RTS and DTR line control.  Thanks to joe@bndlg.de for parts of it.
-
- 2001_Sep_19 gkh
-	Added break support.
-
- 2001_Aug_30 gkh
-	fixed oops in write_bulk_callback.
-
- 2001_Aug_28 gkh
-	reworked buffer logic to be like other usb-serial drivers.  Hopefully
-	removing some reported problems.
-
- 2001_Jun_06 gkh
-	finished porting to 2.4 format.
-
-
------------------------------------------------------------------------
-io_edgeport.c Change Log comments:
-
- 2003_04_03 al borchers
-  - fixed a bug (that shows up with dosemu) where the tty struct is
-    used in a callback after it has been freed
-
- 2.3 2002_03_08 greg kroah-hartman
-	- fixed bug when multiple devices were attached at the same time.
-
- 2.2 2001_11_14 greg kroah-hartman
-	- fixed bug in edge_close that kept the port from being used more
-	  than once.
-	- fixed memory leak on device removal.
-	- fixed potential double free of memory when command urb submitting
-	  failed.
-	- other small cleanups when the device is removed
-
- 2.1 2001_07_09 greg kroah-hartman
-	- added support for TIOCMBIS and TIOCMBIC.
-
-     (04/08/2001) gb
-	- Identify version on module load.
-
- 2.0 2001_03_05 greg kroah-hartman
-	- reworked entire driver to fit properly in with the other usb-serial
-	  drivers.  Occasional oopses still happen, but it's a good start.
-
- 1.2.3 (02/23/2001) greg kroah-hartman
-	- changed device table to work properly for 2.4.x final format.
-	- fixed problem with dropping data at high data rates.
-
- 1.2.2 (11/27/2000) greg kroah-hartman
-	- cleaned up more NTisms.
-	- Added device table for 2.4.0-test11
-
- 1.2.1 (11/08/2000) greg kroah-hartman
-	- Started to clean up NTisms.
-	- Fixed problem with dev field of urb for kernels >= 2.4.0-test9
-
- 1.2 (10/17/2000) David Iacovelli
- 	Remove all EPIC code and GPL source
-  Fix RELEVANT_IFLAG macro to include flow control
-  changes port configuration changes.
-  Fix redefinition of SERIAL_MAGIC
-  Change all timeout values to 5 seconds
-  Tried to fix the UHCI multiple urb submission, but failed miserably.
-  it seems to work fine with OHCI.
-  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
-    find a way to work arount this UHCI bug )
-
- 1.1 (10/11/2000) David Iacovelli
-  Fix XON/XOFF flow control to support both IXON and IXOFF
-
- 0.9.27 (06/30/2000) David Iacovelli
-  Added transmit queue and now allocate urb for command writes.
-
- 0.9.26 (06/29/2000) David Iacovelli
-  Add support for 80251 based edgeport
-
- 0.9.25 (06/27/2000) David Iacovelli
-  Do not close the port if it has multiple opens.
-
- 0.9.24 (05/26/2000) David Iacovelli
-  Add IOCTLs to support RXTX and JAVA POS
-  and first cut at running BlackBox Demo
-
- 0.9.23 (05/24/2000) David Iacovelli
-  Add IOCTLs to support RXTX and JAVA POS
-
- 0.9.22 (05/23/2000) David Iacovelli
-  fixed bug in enumeration.  If epconfig turns on mapping by
-  path after a device is already plugged in, we now update
-  the mapping correctly
-
- 0.9.21 (05/16/2000) David Iacovelli
-  Added BlockUntilChaseResp() to also wait for txcredits
-  Updated the way we allocate and handle write URBs
-	Add debug code to dump buffers
-
- 0.9.20 (05/01/2000) David Iacovelli
-	change driver to use usb/tts/
-
- 0.9.19 (05/01/2000) David Iacovelli
-  Update code to compile if DEBUG is off
-
- 0.9.18 (04/28/2000) David Iacovelli
-  cleanup and test tty_register with devfs
-
- 0.9.17 (04/27/2000) greg kroah-hartman
- 	changed tty_register around to be like the way it
- 	was before, but now it works properly with devfs.
-
- 0.9.16 (04/26/2000) david iacovelli
-  Fixed bug in GetProductInfo()
-
- 0.9.15 (04/25/2000) david iacovelli
-	Updated enumeration
-
- 0.9.14 (04/24/2000) david iacovelli
-  Removed all config/status IOCTLS and
-  converted to using /proc/edgeport
-  still playing with devfs
-
- 0.9.13 (04/24/2000) david iacovelli
-  Removed configuration based on ttyUSB0
-  Added support for configuration using /prod/edgeport
-  first attempt at using devfs (not working yet!)
-  Added IOCTL to GetProductInfo()
-  Added support for custom baud rates
-	Add support for random port numbers
-
- 0.9.12 (04/18/2000) david iacovelli
-	added additional configuration IOCTLs
-  use ttyUSB0 for configuration
-
- 0.9.11 (04/17/2000) greg kroah-hartman
-	fixed module initialization race conditions.
-	made all urbs dynamically allocated.
-	made driver devfs compatible. now it only registers the tty device
-	when the device is actually plugged in.
-
- 0.9.10 (04/13/2000) greg kroah-hartman
-	added proc interface framework.
-
- 0.9.9 (04/13/2000) david iacovelli
-	added enumeration code and ioctls to configure the device
-
- 0.9.8 (04/12/2000) david iacovelli
-  Change interrupt read start when device is plugged in
-  and stop when device is removed
-	process interrupt reads when all ports are closed
-  (keep value of rxBytesAvail consistent with the edgeport)
-  set the USB_BULK_QUEUE flag so that we can shove a bunch
-  of urbs at once down the pipe
-
- 0.9.7 (04/10/2000) david iacovelli
- 	start to add enumeration code.
-  generate serial number for epic devices
-  add support for kdb
-
- 0.9.6 (03/30/2000) david iacovelli
-  add IOCTL to get string, manufacture, and boot descriptors
-
- 0.9.5 (03/14/2000) greg kroah-hartman
-	more error checking added to SerialOpen to try to fix UHCI open problem
-
- 0.9.4 (03/09/2000) greg kroah-hartman
-	added more error checking to handle oops when data is hanging
-	around and tty is abruptly closed.
-
- 0.9.3 (03/09/2000) david iacovelli
-	Add epic support for xon/xoff chars
-	play with performance
-
- 0.9.2 (03/08/2000) greg kroah-hartman
-	changed most "info" calls to "dbg"
-	implemented flow control properly in the termios call
-
- 0.9.1 (03/08/2000) david iacovelli
-	added EPIC support
-	enabled bootloader update
-
- 0.9 (03/08/2000) greg kroah-hartman
-	Release to IO networks.
-	Integrated changes that David made
-  made getting urbs for writing SMP safe
-
- 0.8 (03/07/2000) greg kroah-hartman
-	Release to IO networks.
-	Fixed problems that were seen in code by David.
-  Now both Edgeport/4 and Edgeport/2 works properly.
-  Changed most of the functions to use port instead of serial.
-
- 0.7 (02/27/2000) greg kroah-hartman
-	Milestone 3 release.
-	Release to IO Networks
-	ioctl for waiting on line change implemented.
-	ioctl for getting statistics implemented.
-	multiport support working.
-	lsr and msr registers are now handled properly.
-	change break now hooked up and working.
-	support for all known Edgeport devices.
-
- 0.6 (02/22/2000) greg kroah-hartman
-	Release to IO networks.
-	CHASE is implemented correctly when port is closed.
-	SerialOpen now blocks correctly until port is fully opened.
-
- 0.5 (02/20/2000) greg kroah-hartman
-	Release to IO networks.
-	Known problems:
-		modem status register changes are not sent on to the user
-		CHASE is not implemented when the port is closed.
-
- 0.4 (02/16/2000) greg kroah-hartman
-	Second cut at the CeBit demo.
-	Doesn't leak memory on every write to the port
-	Still small leaks on startup.
-	Added support for Edgeport/2 and Edgeport/8
-
- 0.3 (02/15/2000) greg kroah-hartman
-	CeBit demo release.
-	Force the line settings to 4800, 8, 1, e for the demo.
-	Warning! This version leaks memory like crazy!
-
- 0.2 (01/30/2000) greg kroah-hartman
-	Milestone 1 release.
-	Device is found by USB subsystem, enumerated, firmware is downloaded
-	and the descriptors are printed to the debug log, config is set, and
-	green light starts to blink. Open port works, and data can be sent
-	and received at the default settings of the UART. Loopback connector
-	and debug log confirms this.
-
- 0.1 (01/23/2000) greg kroah-hartman
-	Initial release to help IO Networks try to set up their test system.
-	Edgeport4 is recognized, firmware is downloaded, config is set so
-	device blinks green light every 3 sec. Port is bound, but opening,
-	closing, and sending data do not work properly.
-
-
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index d6921fa..f9f29b2 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -20,50 +20,7 @@
  * TODO:
  * -- Add true modem contol line query capability.  Currently we track the
  *    states reported by the interrupt and the states we request.
- * -- Add error reporting back to application for UART error conditions.
- *    Just point me at how to implement this and I'll do it. I've put the
- *    framework in, but haven't analyzed the "tty_flip" interface yet.
  * -- Add support for flush commands
- * -- Add everything that is missing :)
- *
- * 27-Nov-2001 gkh
- * 	compressed all the differnent device entries into 1.
- *
- * 30-May-2001 gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- *	problems.
- *
- * 08-Apr-2001 gb
- *	- Identify version on module load.
- *
- * 12-Mar-2001 gkh
- *	- Added support for the GoHubs GO-COM232 device which is the same as the
- *	  Peracom device.
- *
- * 06-Nov-2000 gkh
- *	- Added support for the old Belkin and Peracom devices.
- *	- Made the port able to be opened multiple times.
- *	- Added some defaults incase the line settings are things these devices
- *	  can't support.
- *
- * 18-Oct-2000 William Greathouse
- *    Released into the wild (linux-usb-devel)
- *
- * 17-Oct-2000 William Greathouse
- *    Add code to recognize firmware version and set hardware flow control
- *    appropriately.  Belkin states that firmware prior to 3.05 does not
- *    operate correctly in hardware handshake mode.  I have verified this
- *    on firmware 2.05 -- for both RTS and DTR input flow control, the control
- *    line is not reset.  The test performed by the Belkin Win* driver is
- *    to enable hardware flow control for firmware 2.06 or greater and
- *    for 1.00 or prior.  I am only enabling for 2.06 or greater.
- *
- * 12-Oct-2000 William Greathouse
- *    First cut at supporting Belkin USB Serial Adapter F5U103
- *    I did not have a copy of the original work to support this
- *    adapter, so pardon any stupid mistakes.  All of the information
- *    I am using to write this driver was acquired by using a modified
- *    UsbSnoop on Windows2000 and from examining the other USB drivers.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 6ae1c06..0e77511 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -335,13 +335,12 @@
 		goto out;
 
 	dbg("%s - submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
 	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (r) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, r);
 		ch341_close(port);
-		return -EPROTO;
+		goto out;
 	}
 
 	r = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fd67cc5..7175bb1 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -280,7 +280,10 @@
 		dbg("%s - Unable to send config request, "
 				"request=0x%x size=%d result=%d\n",
 				__func__, request, size, result);
-		return -EPROTO;
+		if (result > 0)
+			result = -EPROTO;
+
+		return result;
 	}
 
 	return 0;
@@ -331,7 +334,10 @@
 		dbg("%s - Unable to send request, "
 				"request=0x%x size=%d result=%d\n",
 				__func__, request, size, result);
-		return -EPROTO;
+		if (result > 0)
+			result = -EPROTO;
+
+		return result;
 	}
 
 	return 0;
@@ -395,10 +401,11 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
-		dev_err(&port->dev, "%s - Unable to enable UART\n",
-				__func__);
-		return -EPROTO;
+	result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
+								UART_ENABLE);
+	if (result) {
+		dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
+		return result;
 	}
 
 	result = usb_serial_generic_open(tty, port);
@@ -520,18 +527,13 @@
 		cflag |= PARENB;
 		break;
 	case BITS_PARITY_MARK:
-		dbg("%s - parity = MARK (not supported, disabling parity)",
-				__func__);
-		cflag &= ~PARENB;
-		bits &= ~BITS_PARITY_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		dbg("%s - parity = MARK", __func__);
+		cflag |= (PARENB|PARODD|CMSPAR);
 		break;
 	case BITS_PARITY_SPACE:
-		dbg("%s - parity = SPACE (not supported, disabling parity)",
-				__func__);
-		cflag &= ~PARENB;
-		bits &= ~BITS_PARITY_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		dbg("%s - parity = SPACE", __func__);
+		cflag &= ~PARODD;
+		cflag |= (PARENB|CMSPAR);
 		break;
 	default:
 		dbg("%s - Unknown parity mode, disabling parity", __func__);
@@ -588,7 +590,6 @@
 	if (!tty)
 		return;
 
-	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
 	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
@@ -643,16 +644,27 @@
 					"not supported by device\n");
 	}
 
-	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
+	if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
+	    (old_cflag & (PARENB|PARODD|CMSPAR))) {
 		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
-			if (cflag & PARODD) {
-				bits |= BITS_PARITY_ODD;
-				dbg("%s - parity = ODD", __func__);
+			if (cflag & CMSPAR) {
+			    if (cflag & PARODD) {
+				    bits |= BITS_PARITY_MARK;
+				    dbg("%s - parity = MARK", __func__);
+			    } else {
+				    bits |= BITS_PARITY_SPACE;
+				    dbg("%s - parity = SPACE", __func__);
+			    }
 			} else {
-				bits |= BITS_PARITY_EVEN;
-				dbg("%s - parity = EVEN", __func__);
+			    if (cflag & PARODD) {
+				    bits |= BITS_PARITY_ODD;
+				    dbg("%s - parity = ODD", __func__);
+			    } else {
+				    bits |= BITS_PARITY_EVEN;
+				    dbg("%s - parity = EVEN", __func__);
+			    }
 			}
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index f744ab7..98bf833 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -138,7 +138,6 @@
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		int result;
-		serial->port[i]->interrupt_in_urb->dev = serial->dev;
 		result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
 					GFP_KERNEL);
 		if (result)
@@ -208,7 +207,6 @@
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
-	struct usb_serial *serial = port->serial;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int result;
@@ -221,22 +219,18 @@
 		return 0;
 	}
 
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
+	if (!test_and_clear_bit(0, &port->write_urbs_free)) {
 		dbg("%s - already writing", __func__);
 		return 0;
 	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
 
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
 		/* To much data for buffer. Reset buffer. */
 		priv->wrfilled = 0;
-		port->write_urb_busy = 0;
 		spin_unlock_irqrestore(&priv->lock, flags);
+		set_bit(0, &port->write_urbs_free);
 		return 0;
 	}
 
@@ -265,13 +259,7 @@
 		priv->wrsent = length;
 
 		/* set up our urb */
-		usb_fill_bulk_urb(port->write_urb, serial->dev,
-			      usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
-			      port->write_urb->transfer_buffer, length,
-			      ((serial->type->write_bulk_callback) ?
-			       serial->type->write_bulk_callback :
-			       cyberjack_write_bulk_callback),
-			      port);
+		port->write_urb->transfer_buffer_length = length;
 
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -283,7 +271,7 @@
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
 			spin_unlock_irqrestore(&priv->lock, flags);
-			port->write_urb_busy = 0;
+			set_bit(0, &port->write_urbs_free);
 			return 0;
 		}
 
@@ -351,7 +339,6 @@
 		spin_unlock(&priv->lock);
 
 		if (!old_rdtodo) {
-			port->read_urb->dev = port->serial->dev;
 			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (result)
 				dev_err(&port->dev, "%s - failed resubmitting "
@@ -362,7 +349,6 @@
 	}
 
 resubmit:
-	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result)
 		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
@@ -415,7 +401,6 @@
 
 	/* Continue to read if we have still urbs to do. */
 	if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
-		port->read_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&port->dev, "%s - failed resubmitting read "
@@ -432,7 +417,7 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	port->write_urb_busy = 0;
+	set_bit(0, &port->write_urbs_free);
 	if (status) {
 		dbg("%s - nonzero write bulk status received: %d",
 		    __func__, status);
@@ -455,13 +440,7 @@
 		priv->wrsent += length;
 
 		/* set up our urb */
-		usb_fill_bulk_urb(port->write_urb, port->serial->dev,
-			      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
-			      port->write_urb->transfer_buffer, length,
-			      ((port->serial->type->write_bulk_callback) ?
-			       port->serial->type->write_bulk_callback :
-			       cyberjack_write_bulk_callback),
-			      port);
+		port->write_urb->transfer_buffer_length = length;
 
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d9906eb..07680d6 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -16,32 +16,6 @@
  *
  * See http://geocities.com/i0xox0i for information on this driver and the
  * earthmate usb device.
- *
- *  Lonnie Mendez <dignome@gmail.com>
- *  4-29-2005
- *	Fixed problem where setting or retreiving the serial config would fail
- *	with EPIPE.  Removed CRTS toggling so the driver behaves more like
- *	other usbserial adapters.  Issued new interval of 1ms instead of the
- *	default 10ms.  As a result, transfer speed has been substantially
- *	increased from avg. 850bps to avg. 3300bps.  initial termios has also
- *	been modified.  Cleaned up code and formatting issues so it is more
- *	readable.  Replaced the C++ style comments.
- *
- *  Lonnie Mendez <dignome@gmail.com>
- *  12-15-2004
- *	Incorporated write buffering from pl2303 driver.  Fixed bug with line
- *	handling so both lines are raised in cypress_open. (was dropping rts)
- *      Various code cleanups made as well along with other misc bug fixes.
- *
- *  Lonnie Mendez <dignome@gmail.com>
- *  04-10-2004
- *	Driver modified to support dynamic line settings.  Various improvements
- *      and features.
- *
- *  Neil Whelchel
- *  10-2003
- *	Driver first released.
- *
  */
 
 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
@@ -1162,8 +1136,6 @@
 		return;
 
 	if (actually_throttled) {
-		port->interrupt_in_urb->dev = port->serial->dev;
-
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result) {
 			dev_err(&port->dev, "%s - failed submitting read urb, "
@@ -1352,7 +1324,6 @@
 		dbg("%s - nonzero write bulk status received: %d",
 			__func__, status);
 		port->interrupt_out_urb->transfer_buffer_length = 1;
-		port->interrupt_out_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 		if (!result)
 			return;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index e92cbefc..6d26a77 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -13,222 +13,6 @@
 *
 *  Peter Berger (pberger@brimson.com)
 *  Al Borchers (borchers@steinerpoint.com)
-* 
-* (12/03/2001) gkh
-*	switched to using port->port.count instead of private version.
-*	Removed port->active
-*
-* (04/08/2001) gb
-*	Identify version on module load.
-*
-* (11/01/2000) Adam J. Richter
-*	usb_device_id table support
-* 
-* (11/01/2000) pberger and borchers
-*    -- Turned off the USB_DISABLE_SPD flag for write bulk urbs--it caused
-*       USB 4 ports to hang on startup.
-*    -- Serialized access to write urbs by adding the dp_write_urb_in_use
-*       flag; otherwise, the driver caused SMP system hangs.  Watching the
-*       urb status is not sufficient.
-*
-* (10/05/2000) gkh
-*    -- Fixed bug with urb->dev not being set properly, now that the usb
-*	core needs it.
-* 
-*  (8/8/2000) pberger and borchers
-*    -- Fixed close so that 
-*       - it can timeout while waiting for transmit idle, if needed;
-*       - it ignores interrupts when flushing the port, turning
-*         of modem signalling, and so on;
-*       - it waits for the flush to really complete before returning.
-*    -- Read_bulk_callback and write_bulk_callback check for a closed
-*       port before using the tty struct or writing to the port.
-*    -- The two changes above fix the oops caused by interrupted closes.
-*    -- Added interruptible args to write_oob_command and set_modem_signals
-*       and added a timeout arg to transmit_idle; needed for fixes to
-*       close.
-*    -- Added code for rx_throttle and rx_unthrottle so that input flow
-*       control works.
-*    -- Added code to set overrun, parity, framing, and break errors
-*       (untested).
-*    -- Set USB_DISABLE_SPD flag for write bulk urbs, so no 0 length
-*       bulk writes are done.  These hung the Digi USB device.  The
-*       0 length bulk writes were a new feature of usb-uhci added in
-*       the 2.4.0-test6 kernels.
-*    -- Fixed mod inc race in open; do mod inc before sleeping to wait
-*       for a close to finish.
-*
-*  (7/31/2000) pberger
-*    -- Fixed bugs with hardware handshaking:
-*       - Added code to set/clear tty->hw_stopped in digi_read_oob_callback()
-*         and digi_set_termios()
-*    -- Added code in digi_set_termios() to
-*       - add conditional in code handling transition from B0 to only
-*         set RTS if RTS/CTS flow control is either not in use or if
-*         the port is not currently throttled.
-*       - handle turning off CRTSCTS.
-*
-*  (7/30/2000) borchers
-*    -- Added support for more than one Digi USB device by moving
-*       globals to a private structure in the pointed to from the
-*       usb_serial structure.
-*    -- Moved the modem change and transmit idle wait queues into
-*       the port private structure, so each port has its own queue
-*       rather than sharing global queues.
-*    -- Added support for break signals.
-*
-*  (7/25/2000) pberger
-*    -- Added USB-2 support.  Note: the USB-2 supports 3 devices: two
-*       serial and a parallel port.  The parallel port is implemented
-*       as a serial-to-parallel converter.  That is, the driver actually
-*       presents all three USB-2 interfaces as serial ports, but the third
-*       one physically connects to a parallel device.  Thus, for example,
-*       one could plug a parallel printer into the USB-2's third port,
-*       but from the kernel's (and userland's) point of view what's
-*       actually out there is a serial device.
-*
-*  (7/15/2000) borchers
-*    -- Fixed race in open when a close is in progress.
-*    -- Keep count of opens and dec the module use count for each
-*       outstanding open when shutdown is called (on disconnect).
-*    -- Fixed sanity checks in read_bulk_callback and write_bulk_callback
-*       so pointers are checked before use.
-*    -- Split read bulk callback into in band and out of band
-*       callbacks, and no longer restart read chains if there is
-*       a status error or a sanity error.  This fixed the seg
-*       faults and other errors we used to get on disconnect.
-*    -- Port->active is once again a flag as usb-serial intended it
-*       to be, not a count.  Since it was only a char it would
-*       have been limited to 256 simultaneous opens.  Now the open
-*       count is kept in the port private structure in dp_open_count.
-*    -- Added code for modularization of the digi_acceleport driver.
-*
-*  (6/27/2000) pberger and borchers
-*    -- Zeroed out sync field in the wakeup_task before first use;
-*       otherwise the uninitialized value might prevent the task from
-*       being scheduled.
-*    -- Initialized ret value to 0 in write_bulk_callback, otherwise
-*       the uninitialized value could cause a spurious debugging message.
-*
-*  (6/22/2000) pberger and borchers
-*    -- Made cond_wait_... inline--apparently on SPARC the flags arg
-*       to spin_lock_irqsave cannot be passed to another function
-*       to call spin_unlock_irqrestore.  Thanks to Pauline Middelink.
-*    -- In digi_set_modem_signals the inner nested spin locks use just
-*       spin_lock() rather than spin_lock_irqsave().  The old code
-*       mistakenly left interrupts off.  Thanks to Pauline Middelink.
-*    -- copy_from_user (which can sleep) is no longer called while a
-*       spinlock is held.  We copy to a local buffer before getting
-*       the spinlock--don't like the extra copy but the code is simpler.
-*    -- Printk and dbg are no longer called while a spin lock is held.
-*
-*  (6/4/2000) pberger and borchers
-*    -- Replaced separate calls to spin_unlock_irqrestore and
-*       interruptible_sleep_on_timeout with a new function
-*       cond_wait_interruptible_timeout_irqrestore.  This eliminates
-*       the race condition where the wake up could happen after
-*       the unlock and before the sleep.
-*    -- Close now waits for output to drain.
-*    -- Open waits until any close in progress is finished.
-*    -- All out of band responses are now processed, not just the
-*       first in a USB packet.
-*    -- Fixed a bug that prevented the driver from working when the
-*       first Digi port was not the first USB serial port--the driver
-*       was mistakenly using the external USB serial port number to
-*       try to index into its internal ports.
-*    -- Fixed an SMP bug -- write_bulk_callback is called directly from
-*       an interrupt, so spin_lock_irqsave/spin_unlock_irqrestore are
-*       needed for locks outside write_bulk_callback that are also
-*       acquired by write_bulk_callback to prevent deadlocks.
-*    -- Fixed support for select() by making digi_chars_in_buffer()
-*       return 256 when -EINPROGRESS is set, as the line discipline
-*       code in n_tty.c expects.
-*    -- Fixed an include file ordering problem that prevented debugging
-*       messages from working.
-*    -- Fixed an intermittent timeout problem that caused writes to
-*       sometimes get stuck on some machines on some kernels.  It turns
-*       out in these circumstances write_chan() (in n_tty.c) was
-*       asleep waiting for our wakeup call.  Even though we call
-*       wake_up_interruptible() in digi_write_bulk_callback(), there is
-*       a race condition that could cause the wakeup to fail: if our
-*       wake_up_interruptible() call occurs between the time that our
-*       driver write routine finishes and write_chan() sets current->state
-*       to TASK_INTERRUPTIBLE, the effect of our wakeup setting the state
-*       to TASK_RUNNING will be lost and write_chan's subsequent call to
-*       schedule() will never return (unless it catches a signal).
-*       This race condition occurs because write_bulk_callback() (and thus
-*       the wakeup) are called asynchronously from an interrupt, rather than
-*       from the scheduler.  We can avoid the race by calling the wakeup
-*       from the scheduler queue and that's our fix:  Now, at the end of
-*       write_bulk_callback() we queue up a wakeup call on the scheduler
-*       task queue.  We still also invoke the wakeup directly since that
-*       squeezes a bit more performance out of the driver, and any lost
-*       race conditions will get cleaned up at the next scheduler run.
-*
-*       NOTE:  The problem also goes away if you comment out
-*       the two code lines in write_chan() where current->state
-*       is set to TASK_RUNNING just before calling driver.write() and to
-*       TASK_INTERRUPTIBLE immediately afterwards.  This is why the
-*       problem did not show up with the 2.2 kernels -- they do not
-*       include that code.
-*
-*  (5/16/2000) pberger and borchers
-*    -- Added timeouts to sleeps, to defend against lost wake ups.
-*    -- Handle transition to/from B0 baud rate in digi_set_termios.
-*
-*  (5/13/2000) pberger and borchers
-*    -- All commands now sent on out of band port, using
-*       digi_write_oob_command.
-*    -- Get modem control signals whenever they change, support TIOCMGET/
-*       SET/BIS/BIC ioctls.
-*    -- digi_set_termios now supports parity, word size, stop bits, and
-*       receive enable.
-*    -- Cleaned up open and close, use digi_set_termios and
-*       digi_write_oob_command to set port parameters.
-*    -- Added digi_startup_device to start read chains on all ports.
-*    -- Write buffer is only used when count==1, to be sure put_char can
-*       write a char (unless the buffer is full).
-*
-*  (5/10/2000) pberger and borchers
-*    -- Added MOD_INC_USE_COUNT/MOD_DEC_USE_COUNT calls on open/close.
-*    -- Fixed problem where the first incoming character is lost on
-*       port opens after the first close on that port.  Now we keep
-*       the read_urb chain open until shutdown.
-*    -- Added more port conditioning calls in digi_open and digi_close.
-*    -- Convert port->active to a use count so that we can deal with multiple
-*       opens and closes properly.
-*    -- Fixed some problems with the locking code.
-*
-*  (5/3/2000) pberger and borchers
-*    -- First alpha version of the driver--many known limitations and bugs.
-*
-*
-*  Locking and SMP
-*
-*  - Each port, including the out-of-band port, has a lock used to
-*    serialize all access to the port's private structure.
-*  - The port lock is also used to serialize all writes and access to
-*    the port's URB.
-*  - The port lock is also used for the port write_wait condition
-*    variable.  Holding the port lock will prevent a wake up on the
-*    port's write_wait; this can be used with cond_wait_... to be sure
-*    the wake up is not lost in a race when dropping the lock and
-*    sleeping waiting for the wakeup.
-*  - digi_write() does not sleep, since it is sometimes called on
-*    interrupt time.
-*  - digi_write_bulk_callback() and digi_read_bulk_callback() are
-*    called directly from interrupts.  Hence spin_lock_irqsave()
-*    and spin_unlock_irqrestore() are used in the rest of the code
-*    for any locks they acquire.
-*  - digi_write_bulk_callback() gets the port lock before waking up
-*    processes sleeping on the port write_wait.  It also schedules
-*    wake ups so they happen from the scheduler, because the tty
-*    system can miss wake ups from interrupts.
-*  - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
-*    recheck the condition they are sleeping on.  This is defensive,
-*    in case a wake up is lost.
-*  - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
-*    are held when calling copy_to/from_user or printk.
 */
 
 #include <linux/kernel.h>
@@ -654,7 +438,6 @@
 			len &= ~3;
 		memcpy(oob_port->write_urb->transfer_buffer, buf, len);
 		oob_port->write_urb->transfer_buffer_length = len;
-		oob_port->write_urb->dev = port->serial->dev;
 		ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
 		if (ret == 0) {
 			oob_priv->dp_write_urb_in_use = 1;
@@ -732,7 +515,6 @@
 			memcpy(data, buf, len);
 			port->write_urb->transfer_buffer_length = len;
 		}
-		port->write_urb->dev = port->serial->dev;
 
 		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (ret == 0) {
@@ -803,7 +585,6 @@
 	data[7] = 0;
 
 	oob_port->write_urb->transfer_buffer_length = 8;
-	oob_port->write_urb->dev = port->serial->dev;
 
 	ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
 	if (ret == 0) {
@@ -899,10 +680,8 @@
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
 	/* restart read chain */
-	if (priv->dp_throttle_restart) {
-		port->read_urb->dev = port->serial->dev;
+	if (priv->dp_throttle_restart)
 		ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	}
 
 	/* turn throttle off */
 	priv->dp_throttled = 0;
@@ -1195,7 +974,6 @@
 	}
 
 	port->write_urb->transfer_buffer_length = data_len+2;
-	port->write_urb->dev = port->serial->dev;
 
 	*data++ = DIGI_CMD_SEND_DATA;
 	*data++ = data_len;
@@ -1271,7 +1049,6 @@
 			= (unsigned char)priv->dp_out_buf_len;
 		port->write_urb->transfer_buffer_length =
 						priv->dp_out_buf_len + 2;
-		port->write_urb->dev = serial->dev;
 		memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
 			priv->dp_out_buf_len);
 		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -1473,7 +1250,6 @@
 	/* set USB_DISABLE_SPD flag for write bulk urbs */
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		port = serial->port[i];
-		port->write_urb->dev = port->serial->dev;
 		ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (ret != 0) {
 			dev_err(&port->dev,
@@ -1616,7 +1392,6 @@
 	}
 
 	/* continue read */
-	urb->dev = port->serial->dev;
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 	if (ret != 0 && ret != -EPERM) {
 		dev_err(&port->dev,
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 1a49ca9..bf12565 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -901,7 +901,6 @@
 		usb_kill_urb(port->interrupt_in_urb);
 
 		dbg("%s - adding interrupt input", __func__);
-		port->interrupt_in_urb->dev = serial->dev;
 		status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&serial->dev->dev,
@@ -1277,7 +1276,6 @@
 	unsigned long flags;
 	int retval;
 	struct usb_serial_port *port = urb->context;
-	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
@@ -1311,12 +1309,6 @@
 		if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
 
 			/* bulk data available */
-			usb_fill_bulk_urb(port->read_urb, serial->dev,
-					usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-					port->read_urb->transfer_buffer,
-					port->read_urb->transfer_buffer_length,
-					garmin_read_bulk_callback, port);
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (retval) {
 				dev_err(&port->dev,
@@ -1353,7 +1345,6 @@
 
 	garmin_read_process(garmin_data_p, data, urb->actual_length, 0);
 
-	port->interrupt_in_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e4db5ad..f740357 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,7 +1,7 @@
 /*
  * USB Serial Converter Generic functions
  *
- * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2010 - 2011 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or
@@ -132,7 +132,7 @@
 
 	/* if we have a bulk endpoint, start reading from it */
 	if (port->bulk_in_size)
-		result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
+		result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 
 	return result;
 }
@@ -157,8 +157,10 @@
 			kfifo_reset_out(&port->write_fifo);
 			spin_unlock_irqrestore(&port->lock, flags);
 		}
-		if (port->bulk_in_size)
-			usb_kill_urb(port->read_urb);
+		if (port->bulk_in_size) {
+			for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+				usb_kill_urb(port->read_urbs[i]);
+		}
 	}
 }
 
@@ -308,19 +310,52 @@
 	return chars;
 }
 
-int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+						int index, gfp_t mem_flags)
+{
+	int res;
+
+	if (!test_and_clear_bit(index, &port->read_urbs_free))
+		return 0;
+
+	dbg("%s - port %d, urb %d\n", __func__, port->number, index);
+
+	res = usb_submit_urb(port->read_urbs[index], mem_flags);
+	if (res) {
+		if (res != -EPERM) {
+			dev_err(&port->dev,
+					"%s - usb_submit_urb failed: %d\n",
+					__func__, res);
+		}
+		set_bit(index, &port->read_urbs_free);
+		return res;
+	}
+
+	return 0;
+}
+
+int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
 					gfp_t mem_flags)
 {
-	int result;
+	int res;
+	int i;
 
-	result = usb_submit_urb(port->read_urb, mem_flags);
-	if (result && result != -EPERM) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
-							__func__, result);
+	dbg("%s - port %d", __func__, port->number);
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		res = usb_serial_generic_submit_read_urb(port, i, mem_flags);
+		if (res)
+			goto err;
 	}
-	return result;
+
+	return 0;
+err:
+	for (; i >= 0; --i)
+		usb_kill_urb(port->read_urbs[i]);
+
+	return res;
 }
-EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urb);
+EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs);
 
 void usb_serial_generic_process_read_urb(struct urb *urb)
 {
@@ -356,14 +391,19 @@
 {
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
 	unsigned long flags;
+	int i;
 
-	dbg("%s - port %d", __func__, port->number);
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		if (urb == port->read_urbs[i])
+			break;
+	}
+	set_bit(i, &port->read_urbs_free);
 
-	if (unlikely(status != 0)) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
+	dbg("%s - port %d, urb %d, len %d\n", __func__, port->number, i,
+							urb->actual_length);
+	if (urb->status) {
+		dbg("%s - non-zero urb status: %d\n", __func__, urb->status);
 		return;
 	}
 
@@ -376,7 +416,7 @@
 	port->throttled = port->throttle_req;
 	if (!port->throttled) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
+		usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
 	} else
 		spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -443,7 +483,7 @@
 	spin_unlock_irq(&port->lock);
 
 	if (was_throttled)
-		usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
+		usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
 
@@ -509,8 +549,9 @@
 		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
 			continue;
 
-		if (port->read_urb) {
-			r = usb_submit_urb(port->read_urb, GFP_NOIO);
+		if (port->bulk_in_size) {
+			r = usb_serial_generic_submit_read_urbs(port,
+								GFP_NOIO);
 			if (r < 0)
 				c++;
 		}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 2ee8075..abd2ee2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -610,7 +610,6 @@
 
 					/* we have pending bytes on the
 					   bulk in pipe, send a request */
-					edge_serial->read_urb->dev = edge_serial->serial->dev;
 					result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 					if (result) {
 						dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
@@ -711,7 +710,6 @@
 	/* check to see if there's any more data for us to read */
 	if (edge_serial->rxBytesAvail > 0) {
 		dbg("%s - posting a read", __func__);
-		edge_serial->read_urb->dev = edge_serial->serial->dev;
 		retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 		if (retval) {
 			dev_err(&urb->dev->dev,
@@ -1330,7 +1328,6 @@
 	edge_port->txCredits -= count;
 	edge_port->icount.tx += count;
 
-	urb->dev = edge_serial->serial->dev;
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		/* something went wrong */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 0aac00a..e44d375 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -15,13 +15,6 @@
  * For questions or problems with this driver, contact Inside Out
  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  * or Al Borchers <alborchers@steinerpoint.com>.
- *
- * Version history:
- *
- *	July 11, 2002 	Removed 4 port device structure since all TI UMP
- *			chips have only 2 ports
- *			David Iacovelli (davidi@ionetworks.com)
- *
  */
 
 #include <linux/kernel.h>
@@ -1777,12 +1770,11 @@
 exit:
 	/* continue read unless stopped */
 	spin_lock(&edge_port->ep_lock);
-	if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) {
-		urb->dev = edge_port->port->serial->dev;
+	if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
 		retval = usb_submit_urb(urb, GFP_ATOMIC);
-	} else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING) {
+	else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
 		edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
-	}
+
 	spin_unlock(&edge_port->ep_lock);
 	if (retval)
 		dev_err(&urb->dev->dev,
@@ -1959,9 +1951,7 @@
 			status = -EINVAL;
 			goto release_es_lock;
 		}
-		urb->complete = edge_interrupt_callback;
 		urb->context = edge_serial;
-		urb->dev = dev;
 		status = usb_submit_urb(urb, GFP_KERNEL);
 		if (status) {
 			dev_err(&port->dev,
@@ -1987,9 +1977,7 @@
 		goto unlink_int_urb;
 	}
 	edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
-	urb->complete = edge_bulk_in_callback;
 	urb->context = edge_port;
-	urb->dev = dev;
 	status = usb_submit_urb(urb, GFP_KERNEL);
 	if (status) {
 		dev_err(&port->dev,
@@ -2118,12 +2106,7 @@
 				port->write_urb->transfer_buffer);
 
 	/* set up our urb */
-	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
-			   usb_sndbulkpipe(port->serial->dev,
-					    port->bulk_out_endpointAddress),
-			   port->write_urb->transfer_buffer, count,
-			   edge_bulk_out_callback,
-			   port);
+	port->write_urb->transfer_buffer_length = count;
 
 	/* send the data out the bulk port */
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -2267,9 +2250,6 @@
 
 	if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
 		urb = edge_port->port->read_urb;
-		urb->complete = edge_bulk_in_callback;
-		urb->context = edge_port;
-		urb->dev = edge_port->port->serial->dev;
 		status = usb_submit_urb(urb, GFP_ATOMIC);
 	}
 	edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 4735931..36f5cbe 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -8,40 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
- * (12/12/2002) ganesh
- * 	Added support for practically all devices supported by ActiveSync
- * 	on Windows. Thanks to Wes Cilldhaire <billybobjoehenrybob@hotmail.com>.
- *
- * (26/11/2002) ganesh
- * 	Added insmod options to specify product and vendor id.
- * 	Use modprobe ipaq vendor=0xfoo product=0xbar
- *
- * (26/7/2002) ganesh
- * 	Fixed up broken error handling in ipaq_open. Retry the "kickstart"
- * 	packet much harder - this drastically reduces connection failures.
- *
- * (30/4/2002) ganesh
- * 	Added support for the Casio EM500. Completely untested. Thanks
- * 	to info from Nathan <wfilardo@fuse.net>
- *
- * (19/3/2002) ganesh
- *	Don't submit urbs while holding spinlocks. Not strictly necessary
- *	in 2.5.x.
- *
- * (8/3/2002) ganesh
- * 	The ipaq sometimes emits a '\0' before the CLIENT string. At this
- * 	point of time, the ppp ldisc is not yet attached to the tty, so
- * 	n_tty echoes "^ " to the ipaq, which messes up the chat. In 2.5.6-pre2
- * 	this causes a panic because echo_char() tries to sleep in interrupt
- * 	context.
- * 	The fix is to tell the upper layers that this is a raw device so that
- * 	echoing is suppressed. Thanks to Lyle Lindholm for a detailed bug
- * 	report.
- *
- * (25/2/2002) ganesh
- * 	Added support for the HP Jornada 548 and 568. Completely untested.
- * 	Thanks to info from Heath Robinson and Arieh Davidoff.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index ccbce40..0c537da 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -22,38 +22,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * 2008_Jun_02  Felipe Balbi <me@felipebalbi.com>
- *	Introduced common header to be used also in USB Gadget Framework.
- *	Still needs some other style fixes.
- *
- * 2007_Jun_21  Alan Cox <alan@lxorguk.ukuu.org.uk>
- *	Minimal cleanups for some of the driver problens and tty layer abuse.
- *	Still needs fixing to allow multiple dongles.
- *
- * 2002_Mar_07	greg kh
- *	moved some needed structures and #define values from the
- *	net/irda/irda-usb.h file into our file, as we don't want to depend on
- *	that codebase compiling correctly :)
- *
- * 2002_Jan_14  gb
- *	Added module parameter to force specific number of XBOFs.
- *	Added ir_xbof_change().
- *	Reorganized read_bulk_callback error handling.
- *	Switched from FILL_BULK_URB() to usb_fill_bulk_urb().
- *
- * 2001_Nov_08  greg kh
- *	Changed the irda_usb_find_class_desc() function based on comments and
- *	code from Martin Diehl.
- *
- * 2001_Nov_01	greg kh
- *	Added support for more IrDA USB devices.
- *	Added support for zero packet.  Added buffer override paramater, so
- *	users can transfer larger packets at once if they wish.  Both patches
- *	came from Dag Brattli <dag@obexcode.com>.
- *
- * 2001_Oct_07	greg kh
- *	initial version released.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 6aca631..64d0ffd 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1168,15 +1168,14 @@
 			  port->write_urb->transfer_buffer, 1,
 			  read_rxcmd_callback, port);
 	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
 		iuu_close(port);
-		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
 	}
+
 	return result;
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a442352..bc8dc20 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -25,73 +25,6 @@
 
   Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
   staff in their work on open source projects.
-
-  Change History
-
-    2003sep04	LPM (Keyspan) add support for new single port product USA19HS.
-				Improve setup message handling for all devices.
-
-    Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing <keyspan@jsl.com>)
-      Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4)
-      Linux source tree.  The Linux tree lacked support for the 49WLC and
-      others.  The Keyspan patches didn't work with the current kernel.
-
-    2003jan30	LPM	add support for the 49WLC and MPR
-
-    Wed Apr 25 12:00:00 PST 2002 (Keyspan)
-      Started with Hugh Blemings' code dated Jan 17, 2002.  All adapters
-      now supported (including QI and QW).  Modified port open, port
-      close, and send setup() logic to fix various data and endpoint
-      synchronization bugs and device LED status bugs.  Changed keyspan_
-      write_room() to accurately return transmit buffer availability.
-      Changed forwardingLength from 1 to 16 for all adapters.
-
-    Fri Oct 12 16:45:00 EST 2001
-      Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
-
-    Wed Apr 25 12:00:00 PST 2002 (Keyspan)
-      Started with Hugh Blemings' code dated Jan 17, 2002.  All adapters
-      now supported (including QI and QW).  Modified port open, port
-      close, and send setup() logic to fix various data and endpoint
-      synchronization bugs and device LED status bugs.  Changed keyspan_
-      write_room() to accurately return transmit buffer availability.
-      Changed forwardingLength from 1 to 16 for all adapters.
-
-    Fri Oct 12 16:45:00 EST 2001
-      Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
-
-    Mon Oct  8 14:29:00 EST 2001 hugh
-      Fixed bug that prevented mulitport devices operating correctly
-      if they weren't the first unit attached.
-
-    Sat Oct  6 12:31:21 EST 2001 hugh
-      Added support for USA-28XA and -28XB, misc cleanups, break support
-      for usa26 based models thanks to David Gibson.
-
-    Thu May 31 11:56:42 PDT 2001 gkh
-      switched from using spinlock to a semaphore
-
-    (04/08/2001) gb
-	Identify version on module load.
-
-    (11/01/2000) Adam J. Richter
-	usb_device_id table support.
-
-    Tue Oct 10 23:15:33 EST 2000 Hugh
-      Merged Paul's changes with my USA-49W mods.  Work in progress
-      still...
-
-    Wed Jul 19 14:00:42 EST 2000 gkh
-      Added module_init and module_exit functions to handle the fact that
-      this driver is a loadable module now.
-
-    Tue Jul 18 16:14:52 EST 2000 Hugh
-      Basic character input/output for USA-19 now mostly works,
-      fixed at 9600 baud for the moment.
-
-    Sat Jul  8 11:11:48 EST 2000 Hugh
-      First public release - nothing works except the firmware upload.
-      Tested on PPC and x86 architectures, seems to behave...
 */
 
 
@@ -397,7 +330,6 @@
 		/* send the data out the bulk port */
 		this_urb->transfer_buffer_length = todo + dataOffset;
 
-		this_urb->dev = port->serial->dev;
 		err = usb_submit_urb(this_urb, GFP_ATOMIC);
 		if (err != 0)
 			dbg("usb_submit_urb(write bulk) failed (%d)", err);
@@ -463,7 +395,6 @@
 	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = port->serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -559,7 +490,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -609,7 +539,6 @@
 		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
-		urb->dev = port->serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err != 0)
 			dbg("%s - resubmit read urb failed. (%d)",
@@ -694,7 +623,6 @@
 	}
 
 		/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -789,8 +717,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
-
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -848,7 +774,6 @@
 	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = port->serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -919,8 +844,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
-
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -996,7 +919,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = port->serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1047,7 +969,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1123,7 +1044,6 @@
 	}
 
 	/* Resubmit urb so we continue receiving */
-	urb->dev = serial->dev;
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1223,7 +1143,6 @@
 		urb = p_priv->in_urbs[i];
 		if (urb == NULL)
 			continue;
-		urb->dev = serial->dev;
 
 		/* make sure endpoint data toggle is synchronized
 		   with the device */
@@ -1239,7 +1158,6 @@
 		urb = p_priv->out_urbs[i];
 		if (urb == NULL)
 			continue;
-		urb->dev = serial->dev;
 		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
 						usb_pipeout(urb->pipe), 0); */
 	}
@@ -1956,7 +1874,6 @@
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
-	this_urb->dev = serial->dev;
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
@@ -2084,7 +2001,6 @@
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
-	this_urb->dev = serial->dev;
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed", __func__);
@@ -2271,8 +2187,6 @@
 
 		/* send the data out the device on control endpoint */
 		this_urb->transfer_buffer_length = sizeof(msg);
-
-		this_urb->dev = serial->dev;
 	}
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
@@ -2415,7 +2329,6 @@
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
-	this_urb->dev = serial->dev;
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
@@ -2561,7 +2474,6 @@
 
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
-	this_urb->dev = serial->dev;
 
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
@@ -2650,14 +2562,12 @@
 	keyspan_setup_urbs(serial);
 
 	if (s_priv->instat_urb != NULL) {
-		s_priv->instat_urb->dev = serial->dev;
 		err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
 		if (err != 0)
 			dbg("%s - submit instat urb failed %d", __func__,
 				err);
 	}
 	if (s_priv->indat_urb != NULL) {
-		s_priv->indat_urb->dev = serial->dev;
 		err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
 		if (err != 0)
 			dbg("%s - submit indat urb failed %d", __func__,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index d5c0c6a..a406156 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -12,59 +12,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (09/07/2001) gkh
- *	cleaned up the Xircom support.  Added ids for Entregra device which is
- *	the same as the Xircom device.  Enabled the code to be compiled for
- *	either Xircom or Keyspan devices.
- *
- * (08/11/2001) Cristian M. Craciunescu
- *	support for Xircom PGSDB9
- *
- * (05/31/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- *	problems.
- *
- * (04/08/2001) gb
- *	Identify version on module load.
- *
- * (11/01/2000) Adam J. Richter
- *	usb_device_id table support
- *
- * (10/05/2000) gkh
- *	Fixed bug with urb->dev not being set properly, now that the usb
- *	core needs it.
- *
- * (08/28/2000) gkh
- *	Added locks for SMP safeness.
- *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- *	than once.
- *
- * (07/20/2000) borchers
- *	- keyspan_pda_write no longer sleeps if it is called on interrupt time;
- *	  PPP and the line discipline with stty echo on can call write on
- *	  interrupt time and this would cause an oops if write slept
- *	- if keyspan_pda_write is in an interrupt, it will not call
- *	  usb_control_msg (which sleeps) to query the room in the device
- *	  buffer, it simply uses the current room value it has
- *	- if the urb is busy or if it is throttled keyspan_pda_write just
- *	  returns 0, rather than sleeping to wait for this to change; the
- *	  write_chan code in n_tty.c will sleep if needed before calling
- *	  keyspan_pda_write again
- *	- if the device needs to be unthrottled, write now queues up the
- *	  call to usb_control_msg (which sleeps) to unthrottle the device
- *	- the wakeups from keyspan_pda_write_bulk_callback are queued rather
- *	  than done directly from the callback to avoid the race in write_chan
- *	- keyspan_pda_chars_in_buffer also indicates its buffer is full if the
- *	  urb status is -EINPROGRESS, meaning it cannot write at the moment
- *
- * (07/19/2000) gkh
- *	Added module_init and module_exit functions to handle the fact that this
- *	driver is a loadable module now.
- *
- * (03/26/2000) gkh
- *	Split driver up into device specific pieces.
- *
  */
 
 
@@ -290,7 +237,6 @@
 	struct usb_serial_port *port = tty->driver_data;
 	/* just restart the receive interrupt URB */
 	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
-	port->interrupt_in_urb->dev = port->serial->dev;
 	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
 		dbg(" usb_submit_urb(read urb) failed");
 }
@@ -532,11 +478,11 @@
 	   the device is full (wait until it says there is room)
 	*/
 	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy || priv->tx_throttled) {
+	if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) {
 		spin_unlock_bh(&port->lock);
 		return 0;
 	}
-	port->write_urb_busy = 1;
+	clear_bit(0, &port->write_urbs_free);
 	spin_unlock_bh(&port->lock);
 
 	/* At this point the URB is in our control, nobody else can submit it
@@ -598,7 +544,6 @@
 
 		priv->tx_room -= count;
 
-		port->write_urb->dev = port->serial->dev;
 		rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (rc) {
 			dbg(" usb_submit_urb(write bulk) failed");
@@ -618,7 +563,7 @@
 	rc = count;
 exit:
 	if (rc < 0)
-		port->write_urb_busy = 0;
+		set_bit(0, &port->write_urbs_free);
 	return rc;
 }
 
@@ -628,7 +573,7 @@
 	struct usb_serial_port *port = urb->context;
 	struct keyspan_pda_private *priv;
 
-	port->write_urb_busy = 0;
+	set_bit(0, &port->write_urbs_free);
 	priv = usb_get_serial_port_data(port);
 
 	/* queue up a wakeup at scheduler time */
@@ -661,7 +606,7 @@
 	   n_tty.c:normal_poll() ) that we're not writeable. */
 
 	spin_lock_irqsave(&port->lock, flags);
-	if (port->write_urb_busy || priv->tx_throttled)
+	if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled)
 		ret = 256;
 	spin_unlock_irqrestore(&port->lock, flags);
 	return ret;
@@ -717,7 +662,6 @@
 	priv->tx_throttled = *room ? 0 : 1;
 
 	/*Start reading from the device*/
-	port->interrupt_in_urb->dev = serial->dev;
 	rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (rc) {
 		dbg("%s - usb_submit_urb(read int) failed", __func__);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index ddd1463..5d3beee 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -20,18 +20,6 @@
  *
  * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
  * (Adapter K), B1 Professional and KAAN Professional (Adapter B)
- *
- * (21/05/2004) tw
- *      Fix bug with P'n'P readers
- *
- * (28/05/2003) tw
- *      Add support for KAAN SIM
- *
- * (12/09/2002) tw
- *      Adapted to 2.5.
- *
- * (11/08/2002) tw
- *      Initial version.
  */
 
 
@@ -231,9 +219,6 @@
 	dbg("%s - port %d", __func__, port->number);
 	priv = usb_get_serial_port_data(port);
 
-	/* someone sets the dev to 0 if the close method has been called */
-	port->interrupt_in_urb->dev = port->serial->dev;
-
 	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (!transfer_buffer)
@@ -393,8 +378,6 @@
 		tty_flip_buffer_push(tty);
 	}
 	tty_kref_put(tty);
-	/* someone sets the dev to 0 if the close method has been called */
-	port->interrupt_in_urb->dev = port->serial->dev;
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	dbg("%s - port %d Send read URB returns: %i",
@@ -475,17 +458,9 @@
 		priv->filled = 0;
 		priv->cur_pos = 0;
 
-		/* someone sets the dev to 0 if the close method
-		   has been called */
-		port->interrupt_in_urb->dev = port->serial->dev;
-
 		/* start reading (except TWIN and KAAN SIM) */
 		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
-			/* someone sets the dev to 0 if the close method has
-			   been called */
-			port->interrupt_in_urb->dev = port->serial->dev;
-
 			result = usb_submit_urb(port->interrupt_in_urb,
 								GFP_NOIO);
 			dbg("%s - port %d Send read URB returns: %i",
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ba0d287..a975bb8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -19,50 +19,6 @@
  *   DTR/RTS signal handling may be incomplete or incorrect. I have mainly
  *   implemented what I have seen with SniffUSB or found in belkin_sa.c.
  *   For further TODOs check also belkin_sa.c.
- *
- * TEST STATUS:
- *   Basic tests have been performed with minicom/zmodem transfers and
- *   modem dialing under Linux 2.4.0-test10 (for me it works fine).
- *
- * 04-Nov-2003 Bill Marr <marr at flex dot com>
- *   - Mimic Windows driver by sending 2 USB 'device request' messages
- *     following normal 'baud rate change' message.  This allows data to be
- *     transmitted to RS-232 devices which don't assert the 'CTS' signal.
- *
- * 10-Nov-2001 Wolfgang Grandegger
- *   - Fixed an endianess problem with the baudrate selection for PowerPC.
- *
- * 06-Dec-2001 Martin Hamilton <martinh@gnu.org>
- *   - Added support for the Belkin F5U109 DB9 adaptor
- *
- * 30-May-2001 Greg Kroah-Hartman
- *   - switched from using spinlock to a semaphore, which fixes lots of
- *     problems.
- *
- * 04-May-2001 Stelian Pop
- *   - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes
- *     instead of the device reported 32 (using 32 bytes causes many data
- *     loss, Windows driver uses 16 too).
- *
- * 02-May-2001 Stelian Pop
- *   - Fixed the baud calculation for Sitecom U232-P25 model
- *
- * 08-Apr-2001 gb
- *   - Identify version on module load.
- *
- * 06-Jan-2001 Cornel Ciocirlan
- *   - Added support for Sitecom U232-P25 model (Product Id 0x0230)
- *   - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
- *
- * 29-Nov-2000 Greg Kroah-Hartman
- *   - Added device id table to fit with 2.4.0-test11 structure.
- *   - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed
- *     (lots of things will change if/when the usb-serial core changes to
- *     handle these issues.
- *
- * 27-Nov-2000 Wolfgang Grandegge
- *   A version for kernel 2.4.0-test10 released to the Linux community
- *   (via linux-usb-devel).
  */
 
 #include <linux/kernel.h>
@@ -526,7 +482,6 @@
 	mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	port->read_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (retval) {
 		dev_err(&port->dev,
@@ -535,7 +490,6 @@
 		goto error;
 	}
 
-	port->interrupt_in_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
 		usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 3524a10..19d112f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -939,14 +939,7 @@
 	}
 	tty_kref_put(tty);
 
-	if (!port->read_urb) {
-		dbg("URB KILLED !!!");
-		return;
-	}
-
 	if (port->read_urb->status != -EINPROGRESS) {
-		port->read_urb->dev = port->serial->dev;
-
 		retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (retval)
 			dbg("usb_submit_urb(read bulk) failed, retval = %d",
@@ -1014,7 +1007,6 @@
 static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
-	struct usb_serial_port *port0;
 	struct urb *urb;
 	struct moschip_port *mos7720_port;
 	int response;
@@ -1029,8 +1021,6 @@
 	if (mos7720_port == NULL)
 		return -ENODEV;
 
-	port0 = serial->port[0];
-
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -1735,8 +1725,6 @@
 	write_mos_reg(serial, port_number, IER, 0x0c);
 
 	if (port->read_urb->status != -EINPROGRESS) {
-		port->read_urb->dev = serial->dev;
-
 		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (status)
 			dbg("usb_submit_urb(read bulk) failed, status = %d",
@@ -1786,13 +1774,7 @@
 	/* change the port settings to the new ones specified */
 	change_port_settings(tty, mos7720_port, old_termios);
 
-	if (!port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!");
-		return;
-	}
-
 	if (port->read_urb->status != -EINPROGRESS) {
-		port->read_urb->dev = serial->dev;
 		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (status)
 			dbg("usb_submit_urb(read bulk) failed, status = %d",
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c72abd5..55cfd62 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -792,8 +792,6 @@
 	}
 
 
-	mos7840_port->read_urb->dev = serial->dev;
-
 	mos7840_port->read_urb_busy = true;
 	retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 
@@ -2058,7 +2056,6 @@
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
 	if (mos7840_port->read_urb_busy == false) {
-		mos7840_port->read_urb->dev = serial->dev;
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 		if (status) {
@@ -2130,7 +2127,6 @@
 	}
 
 	if (mos7840_port->read_urb_busy == false) {
-		mos7840_port->read_urb->dev = serial->dev;
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 		if (status) {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 60f38d5..45a8c55 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -9,31 +9,6 @@
  * driver
  *
  * Please report both successes and troubles to the author at omninet@kroah.com
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- *	problems.
- *
- * (04/08/2001) gb
- *	Identify version on module load.
- *
- * (11/01/2000) Adam J. Richter
- *	usb_device_id table support
- *
- * (10/05/2000) gkh
- *	Fixed bug with urb->dev not being set properly, now that the usb
- *	core needs it.
- *
- * (08/28/2000) gkh
- *	Added locks for SMP safeness.
- *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- *	than once.
- *	Fixed potential race in omninet_write_bulk_callback
- *
- * (07/19/2000) gkh
- *	Added module_init and module_exit functions to handle the fact that this
- *	driver is a loadable module now.
- *
  */
 
 #include <linux/kernel.h>
@@ -44,7 +19,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -174,12 +148,6 @@
 	tty_port_tty_set(&wport->port, tty);
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			usb_rcvbulkpipe(serial->dev,
-				port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
@@ -236,11 +204,6 @@
 	}
 
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			urb->transfer_buffer, urb->transfer_buffer_length,
-			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
 		dev_err(&port->dev,
@@ -267,14 +230,10 @@
 		return 0;
 	}
 
-	spin_lock_bh(&wport->lock);
-	if (wport->write_urb_busy) {
-		spin_unlock_bh(&wport->lock);
+	if (!test_and_clear_bit(0, &port->write_urbs_free)) {
 		dbg("%s - already writing", __func__);
 		return 0;
 	}
-	wport->write_urb_busy = 1;
-	spin_unlock_bh(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -292,10 +251,9 @@
 	/* send the data out the bulk port, always 64 bytes */
 	wport->write_urb->transfer_buffer_length = 64;
 
-	wport->write_urb->dev = serial->dev;
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
-		wport->write_urb_busy = 0;
+		set_bit(0, &wport->write_urbs_free);
 		dev_err(&port->dev,
 			"%s - failed submitting write urb, error %d\n",
 			__func__, result);
@@ -314,8 +272,7 @@
 
 	int room = 0; /* Default: no room */
 
-	/* FIXME: no consistent locking for write_urb_busy */
-	if (wport->write_urb_busy)
+	if (test_bit(0, &wport->write_urbs_free))
 		room = wport->bulk_out_size - OMNINET_HEADERLEN;
 
 	dbg("%s - returns %d", __func__, room);
@@ -332,7 +289,7 @@
 
 	dbg("%s - port %0x", __func__, port->number);
 
-	port->write_urb_busy = 0;
+	set_bit(0, &port->write_urbs_free);
 	if (status) {
 		dbg("%s - nonzero write bulk status received: %d",
 		    __func__, status);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index c248a91..691f57a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -384,7 +384,6 @@
 	priv->actually_throttled = false;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	priv->bulk_read_urb->dev = port->serial->dev;
 	if (was_throttled) {
 		result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
 		if (result)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 4c29e6c..2161d1c 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -264,7 +264,6 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s(): submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -321,7 +320,6 @@
 		priv->flags.write_urb_in_use = 0;
 
 		dbg("%s(): submitting interrupt urb", __func__);
-		port->interrupt_in_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		if (result != 0) {
 			dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -334,7 +332,6 @@
 					port->write_urb->transfer_buffer,
 					count, &port->lock);
 	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_NOIO);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -583,13 +580,12 @@
 	kfree(buf);
 
 	dbg("%s(): submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
 		oti6858_close(port);
-		return -EPROTO;
+		return result;
 	}
 
 	/* setup termios */
@@ -837,7 +833,6 @@
 	if (can_recv) {
 		int result;
 
-		port->read_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result != 0) {
 			priv->flags.read_urb_in_use = 0;
@@ -866,7 +861,6 @@
 		int result;
 
 /*		dbg("%s(): submitting interrupt urb", __func__); */
-		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result != 0) {
 			dev_err(&urb->dev->dev,
@@ -894,18 +888,6 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (status != 0) {
-		/*
-		if (status == -EPROTO) {
-			* PL2303 mysteriously fails with -EPROTO reschedule
-			   the read *
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-								__func__);
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
-			return;
-		}
-		*/
 		dbg("%s(): unable to handle the error, exiting", __func__);
 		return;
 	}
@@ -918,7 +900,6 @@
 	tty_kref_put(tty);
 
 	/* schedule the interrupt urb */
-	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result != 0 && result != -EPERM) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
@@ -955,7 +936,6 @@
 		dbg("%s(): overflow in write", __func__);
 
 		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
 			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
@@ -968,7 +948,6 @@
 	priv->flags.write_urb_in_use = 0;
 
 	/* schedule the interrupt urb if we are still open */
-	port->interrupt_in_urb->dev = port->serial->dev;
 	dbg("%s(): submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index fc2d66f..3292956 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -502,21 +502,20 @@
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	dbg("%s - submitting read urb", __func__);
-	result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
-	if (result) {
-		pl2303_close(port);
-		return -EPROTO;
-	}
-
 	dbg("%s - submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(port);
-		return -EPROTO;
+		return result;
 	}
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		usb_kill_urb(port->interrupt_in_urb);
+		return result;
+	}
+
 	port->port.drain_delay = 256;
 	return 0;
 }
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index b18179b..f248542 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -681,7 +681,6 @@
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (status != -ESHUTDOWN && status != -ENOENT) {
 		usb_mark_last_busy(serial->dev);
-		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err && err != -EPERM)
 			dev_err(&port->dev, "%s: resubmit intr urb "
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 7096f79..c70cc01 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -182,7 +182,6 @@
 	priv->actually_throttled = false;
 	spin_unlock_irq(&priv->lock);
 
-	priv->int_urb->dev = port->serial->dev;
 	if (was_throttled) {
 		result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
 		if (result)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ea84456..4af21f4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -535,9 +535,7 @@
 			status = -EINVAL;
 			goto release_lock;
 		}
-		urb->complete = ti_interrupt_callback;
 		urb->context = tdev;
-		urb->dev = dev;
 		status = usb_submit_urb(urb, GFP_KERNEL);
 		if (status) {
 			dev_err(&port->dev,
@@ -619,9 +617,7 @@
 		goto unlink_int_urb;
 	}
 	tport->tp_read_urb_state = TI_READ_URB_RUNNING;
-	urb->complete = ti_bulk_in_callback;
 	urb->context = tport;
-	urb->dev = dev;
 	status = usb_submit_urb(urb, GFP_KERNEL);
 	if (status) {
 		dev_err(&port->dev, "%s - submit read urb failed, %d\n",
@@ -1236,12 +1232,11 @@
 exit:
 	/* continue to read unless stopping */
 	spin_lock(&tport->tp_lock);
-	if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
-		urb->dev = port->serial->dev;
+	if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
 		retval = usb_submit_urb(urb, GFP_ATOMIC);
-	} else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
+	else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
 		tport->tp_read_urb_state = TI_READ_URB_STOPPED;
-	}
+
 	spin_unlock(&tport->tp_lock);
 	if (retval)
 		dev_err(dev, "%s - resubmit read urb failed, %d\n",
@@ -1574,9 +1569,7 @@
 		tport->tp_read_urb_state = TI_READ_URB_RUNNING;
 		urb = tport->tp_port->read_urb;
 		spin_unlock_irqrestore(&tport->tp_lock, flags);
-		urb->complete = ti_bulk_in_callback;
 		urb->context = tport;
-		urb->dev = tport->tp_port->serial->dev;
 		status = usb_submit_urb(urb, GFP_KERNEL);
 	} else  {
 		tport->tp_read_urb_state = TI_READ_URB_RUNNING;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cc274fd..8c46813 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -50,7 +50,7 @@
 	.disconnect =	usb_serial_disconnect,
 	.suspend =	usb_serial_suspend,
 	.resume =	usb_serial_resume,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 	.supports_autosuspend =	1,
 };
 
@@ -260,6 +260,10 @@
 	else
 		retval = port->serial->type->open(tty, port);
 	mutex_unlock(&serial->disc_mutex);
+
+	if (retval < 0)
+		retval = usb_translate_errors(retval);
+
 	return retval;
 }
 
@@ -360,7 +364,8 @@
 
 	/* pass on to the driver specific version of this function */
 	retval = port->serial->type->write(tty, port, buf, count);
-
+	if (retval < 0)
+		retval = usb_translate_errors(retval);
 exit:
 	return retval;
 }
@@ -562,8 +567,8 @@
 {
 	int i;
 
-	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+		usb_kill_urb(port->read_urbs[i]);
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
 		usb_kill_urb(port->write_urbs[i]);
 	/*
@@ -595,17 +600,17 @@
 	kill_traffic(port);
 	cancel_work_sync(&port->work);
 
-	usb_free_urb(port->read_urb);
-	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
 	usb_free_urb(port->interrupt_out_urb);
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		usb_free_urb(port->read_urbs[i]);
+		kfree(port->bulk_in_buffers[i]);
+	}
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
 		usb_free_urb(port->write_urbs[i]);
 		kfree(port->bulk_out_buffers[i]);
 	}
 	kfifo_free(&port->write_fifo);
-	kfree(port->bulk_in_buffer);
-	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
 	kfree(port);
@@ -686,16 +691,18 @@
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = p->serial->type;
+
 	if (drv->carrier_raised)
 		return drv->carrier_raised(p);
 	/* No carrier control - don't block */
-	return 1;	
+	return 1;
 }
 
 static void serial_dtr_rts(struct tty_port *port, int on)
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = p->serial->type;
+
 	if (drv->dtr_rts)
 		drv->dtr_rts(p, on);
 }
@@ -724,6 +731,7 @@
 	unsigned int minor;
 	int buffer_size;
 	int i;
+	int j;
 	int num_interrupt_in = 0;
 	int num_interrupt_out = 0;
 	int num_bulk_in = 0;
@@ -906,38 +914,41 @@
 	for (i = 0; i < num_bulk_in; ++i) {
 		endpoint = bulk_in_endpoint[i];
 		port = serial->port[i];
-		port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->read_urb) {
-			dev_err(&interface->dev, "No free urbs available\n");
-			goto probe_error;
-		}
 		buffer_size = max_t(int, serial->type->bulk_in_size,
 				usb_endpoint_maxp(endpoint));
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!port->bulk_in_buffer) {
-			dev_err(&interface->dev,
+
+		for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
+			set_bit(j, &port->read_urbs_free);
+			port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+			if (!port->read_urbs[j]) {
+				dev_err(&interface->dev,
+						"No free urbs available\n");
+				goto probe_error;
+			}
+			port->bulk_in_buffers[j] = kmalloc(buffer_size,
+								GFP_KERNEL);
+			if (!port->bulk_in_buffers[j]) {
+				dev_err(&interface->dev,
 					"Couldn't allocate bulk_in_buffer\n");
-			goto probe_error;
-		}
-		usb_fill_bulk_urb(port->read_urb, dev,
-				usb_rcvbulkpipe(dev,
+				goto probe_error;
+			}
+			usb_fill_bulk_urb(port->read_urbs[j], dev,
+					usb_rcvbulkpipe(dev,
 						endpoint->bEndpointAddress),
-				port->bulk_in_buffer, buffer_size,
-				serial->type->read_bulk_callback, port);
+					port->bulk_in_buffers[j], buffer_size,
+					serial->type->read_bulk_callback,
+					port);
+		}
+
+		port->read_urb = port->read_urbs[0];
+		port->bulk_in_buffer = port->bulk_in_buffers[0];
 	}
 
 	for (i = 0; i < num_bulk_out; ++i) {
-		int j;
-
 		endpoint = bulk_out_endpoint[i];
 		port = serial->port[i];
-		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->write_urb) {
-			dev_err(&interface->dev, "No free urbs available\n");
-			goto probe_error;
-		}
 		if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 			goto probe_error;
 		buffer_size = serial->type->bulk_out_size;
@@ -945,17 +956,7 @@
 			buffer_size = usb_endpoint_maxp(endpoint);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!port->bulk_out_buffer) {
-			dev_err(&interface->dev,
-					"Couldn't allocate bulk_out_buffer\n");
-			goto probe_error;
-		}
-		usb_fill_bulk_urb(port->write_urb, dev,
-				usb_sndbulkpipe(dev,
-					endpoint->bEndpointAddress),
-				port->bulk_out_buffer, buffer_size,
-				serial->type->write_bulk_callback, port);
+
 		for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
 			set_bit(j, &port->write_urbs_free);
 			port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
@@ -978,6 +979,9 @@
 					serial->type->write_bulk_callback,
 					port);
 		}
+
+		port->write_urb = port->write_urbs[0];
+		port->bulk_out_buffer = port->bulk_out_buffers[0];
 	}
 
 	if (serial->type->read_int_callback) {
@@ -1196,7 +1200,7 @@
 	.open =			serial_open,
 	.close =		serial_close,
 	.write =		serial_write,
-	.hangup = 		serial_hangup,
+	.hangup =		serial_hangup,
 	.write_room =		serial_write_room,
 	.ioctl =		serial_ioctl,
 	.set_termios =		serial_set_termios,
@@ -1206,9 +1210,9 @@
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
-	.get_icount = 		serial_get_icount,
-	.cleanup = 		serial_cleanup,
-	.install = 		serial_install,
+	.get_icount =		serial_get_icount,
+	.cleanup =		serial_cleanup,
+	.install =		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
 
@@ -1237,7 +1241,7 @@
 
 	usb_serial_tty_driver->owner = THIS_MODULE;
 	usb_serial_tty_driver->driver_name = "usbserial";
-	usb_serial_tty_driver->name = 	"ttyUSB";
+	usb_serial_tty_driver->name = "ttyUSB";
 	usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
 	usb_serial_tty_driver->minor_start = 0;
 	usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 95a8214..9b632e7 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -40,7 +40,7 @@
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 /* This HW really does not support a serial break, so one will be
@@ -54,19 +54,18 @@
 	usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
 }
 
-static void usb_debug_read_bulk_callback(struct urb *urb)
+static void usb_debug_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 
 	if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
-	    memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
-		   USB_DEBUG_BRK_SIZE) == 0) {
+		memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+						USB_DEBUG_BRK_SIZE) == 0) {
 		usb_serial_handle_break(port);
-		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
 		return;
 	}
 
-	usb_serial_generic_read_bulk_callback(urb);
+	usb_serial_generic_process_read_urb(urb);
 }
 
 static struct usb_serial_driver debug_device = {
@@ -79,7 +78,7 @@
 	.num_ports =		1,
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
-	.read_bulk_callback =	usb_debug_read_bulk_callback,
+	.process_read_urb =	usb_debug_process_read_urb,
 };
 
 static int __init debug_init(void)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5b073bc..11af903 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -14,57 +14,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
- *	Upgrade to full working driver
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- *	problems.
- *
- * (04/08/2001) gb
- *	Identify version on module load.
- *
- * 2001_Mar_19 gkh
- *	Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
- *	than once, and the got the proper usb_device_id table entries so
- *	the driver works again.
- *
- * (11/01/2000) Adam J. Richter
- *	usb_device_id table support
- *
- * (10/05/2000) gkh
- *	Fixed bug with urb->dev not being set properly, now that the usb
- *	core needs it.
- *
- * (10/03/2000) smd
- *	firmware is improved to guard against crap sent to device
- *	firmware now replies CMD_FAILURE on bad things
- *	read_callback fix you provided for private info struct
- *	command_finished now indicates success or fail
- *	setup_port struct now packed to avoid gcc padding
- *	firmware uses 1 based port numbering, driver now handles that
- *
- * (09/11/2000) gkh
- *	Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (07/19/2000) gkh
- *	Added module_init and module_exit functions to handle the fact that this
- *	driver is a loadable module now.
- *	Fixed bug with port->minor that was found by Al Borchers
- *
- * (07/04/2000) gkh
- *	Added support for port settings. Baud rate can now be changed. Line
- *	signals are not transferred to and from the tty layer yet, but things
- *	seem to be working well now.
- *
- * (05/04/2000) gkh
- *	First cut at open and close commands. Data can flow through the ports at
- *	default speeds now.
- *
- * (03/26/2000) gkh
- *	Split driver up into device specific pieces.
- *
  */
 
 #include <linux/kernel.h>
@@ -753,7 +702,6 @@
 static int whiteheat_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
-	struct usb_serial *serial = port->serial;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
@@ -789,7 +737,6 @@
 		usb_serial_debug_data(debug, &port->dev,
 				__func__, bytes, urb->transfer_buffer);
 
-		urb->dev = serial->dev;
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
@@ -1035,7 +982,6 @@
 		dbg("%s - bad reply from firmware", __func__);
 
 	/* Continue trying to always read */
-	command_port->read_urb->dev = command_port->serial->dev;
 	result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
 	if (result)
 		dbg("%s - failed resubmitting read urb, error %d",
@@ -1141,7 +1087,6 @@
 	transfer_buffer[0] = command;
 	memcpy(&transfer_buffer[1], data, datasize);
 	command_port->write_urb->transfer_buffer_length = datasize + 1;
-	command_port->write_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
 	if (retval) {
 		dbg("%s - submit urb failed", __func__);
@@ -1362,7 +1307,6 @@
 		/* Work around HCD bugs */
 		usb_clear_halt(serial->dev, command_port->read_urb->pipe);
 
-		command_port->read_urb->dev = serial->dev;
 		retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 		if (retval) {
 			dev_err(&serial->dev->dev,
@@ -1410,7 +1354,6 @@
 		list_del(tmp);
 		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 		urb = wrap->urb;
-		urb->dev = port->serial->dev;
 		spin_unlock_irqrestore(&info->lock, flags);
 		retval = usb_submit_urb(urb, GFP_KERNEL);
 		if (retval) {
@@ -1490,7 +1433,6 @@
 			sent += tty_insert_flip_string(tty,
 				urb->transfer_buffer, urb->actual_length);
 
-		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
 			dev_err(&port->dev,
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 42d0eae..9ce3bba 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -139,7 +139,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id alauda_usb_ids[] = {
+static struct usb_device_id alauda_usb_ids[] = {
 #	include "unusual_alauda.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index c844718..740bfe6 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -43,7 +43,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id cypress_usb_ids[] = {
+static struct usb_device_id cypress_usb_ids[] = {
 #	include "unusual_cypress.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index ded836b..0d8d97c 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -88,7 +88,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id datafab_usb_ids[] = {
+static struct usb_device_id datafab_usb_ids[] = {
 #	include "unusual_datafab.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 9fbe742..b990726 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -42,7 +42,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
 	.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id ene_ub6250_usb_ids[] = {
+static struct usb_device_id ene_ub6250_usb_ids[] = {
 #	include "unusual_ene_ub6250.h"
 	{ }		/* Terminating entry */
 };
@@ -607,8 +607,8 @@
 
 static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
 {
-	u32   bl_num;
-	u16    bl_len;
+	u32	bl_num;
+	u32	bl_len;
 	unsigned int offset = 0;
 	unsigned char    buf[8];
 	struct scatterlist *sg = NULL;
@@ -622,7 +622,7 @@
 		else
 			bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
 	} else {
-		bl_len = 1<<(info->SD_READ_BL_LEN);
+		bl_len = 1 << (info->SD_READ_BL_LEN);
 		bl_num = info->SD_Block_Mult * (info->SD_C_SIZE + 1)
 				* (1 << (info->SD_C_SIZE_MULT + 2)) - 1;
 	}
@@ -777,7 +777,7 @@
 	return 0;
 }
 
-int ms_lib_alloc_logicalmap(struct us_data *us)
+static int ms_lib_alloc_logicalmap(struct us_data *us)
 {
 	u32  i;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -2248,7 +2248,7 @@
 /*
  * ms_scsi_irp()
  */
-int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
 {
 	int result;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 6542ca4..8cf16f8 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -119,7 +119,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id freecom_usb_ids[] = {
+static struct usb_device_id freecom_usb_ids[] = {
 #	include "unusual_freecom.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index ffc4193..7b81303 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -76,7 +76,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id isd200_usb_ids[] = {
+static struct usb_device_id isd200_usb_ids[] = {
 #	include "unusual_isd200.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index 6168596..5ef55c7 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -71,7 +71,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id jumpshot_usb_ids[] = {
+static struct usb_device_id jumpshot_usb_ids[] = {
 #	include "unusual_jumpshot.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index ba1b789..fb5bfb0 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -59,7 +59,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id karma_usb_ids[] = {
+static struct usb_device_id karma_usb_ids[] = {
 #	include "unusual_karma.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 1943be5..d29be3e 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -69,7 +69,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id onetouch_usb_ids[] = {
+static struct usb_device_id onetouch_usb_ids[] = {
 #	include "unusual_onetouch.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 0ce5f79..7114767 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -398,10 +398,9 @@
 	u8 cmnd[12] = { 0 };
 	u8 *buf;
 
-	buf = kmalloc(len, GFP_NOIO);
+	buf = kmemdup(data, len, GFP_NOIO);
 	if (buf == NULL)
 		return USB_STOR_TRANSPORT_ERROR;
-	memcpy(buf, data, len);
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
@@ -507,15 +506,14 @@
 static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
 {
 	int retval;
-	u16 addr = 0xFE47;
 	u8 cmnd[12] = {0};
 
-	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __FUNCTION__, addr, len);
+	US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
 
 	cmnd[0] = 0xF0;
 	cmnd[1] = 0x0E;
-	cmnd[2] = (u8)(addr >> 8);
-	cmnd[3] = (u8)addr;
+	cmnd[2] = 0xfe;
+	cmnd[3] = 0x47;
 	cmnd[4] = (u8)(len >> 8);
 	cmnd[5] = (u8)len;
 
@@ -818,7 +816,7 @@
 	return 1;
 }
 
-void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
 	static int card_first_show = 1;
@@ -977,7 +975,7 @@
 }
 
 #ifdef CONFIG_PM
-int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
+static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index bcb9a70..6ecbf44 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -71,7 +71,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id sddr09_usb_ids[] = {
+static struct usb_device_id sddr09_usb_ids[] = {
 #	include "unusual_sddr09.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 44dfed7..f293044 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -48,7 +48,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id sddr55_usb_ids[] = {
+static struct usb_device_id sddr55_usb_ids[] = {
 #	include "unusual_sddr55.h"
 	{ }		/* Terminating entry */
 };
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 0b00091..7d642c8 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -170,7 +170,7 @@
 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 
-struct usb_device_id usbat_usb_ids[] = {
+static struct usb_device_id usbat_usb_ids[] = {
 #	include "unusual_usbat.h"
 	{ }		/* Terminating entry */
 };
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index a87a656..c25cf15 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -512,7 +512,8 @@
 	int charlen;
 
 	if (utf8) {
-		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+		*outlen = utf8s_to_utf16s(name, len, UTF16_HOST_ENDIAN,
+				(wchar_t *) outname, FAT_LFN_LEN + 2);
 		if (*outlen < 0)
 			return *outlen;
 		else if (*outlen > FAT_LFN_LEN)
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 44a88a9..0eb059e 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -114,34 +114,57 @@
 }
 EXPORT_SYMBOL(utf32_to_utf8);
 
-int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
+static inline void put_utf16(wchar_t *s, unsigned c, enum utf16_endian endian)
+{
+	switch (endian) {
+	default:
+		*s = (wchar_t) c;
+		break;
+	case UTF16_LITTLE_ENDIAN:
+		*s = __cpu_to_le16(c);
+		break;
+	case UTF16_BIG_ENDIAN:
+		*s = __cpu_to_be16(c);
+		break;
+	}
+}
+
+int utf8s_to_utf16s(const u8 *s, int len, enum utf16_endian endian,
+		wchar_t *pwcs, int maxlen)
 {
 	u16 *op;
 	int size;
 	unicode_t u;
 
 	op = pwcs;
-	while (*s && len > 0) {
+	while (len > 0 && maxlen > 0 && *s) {
 		if (*s & 0x80) {
 			size = utf8_to_utf32(s, len, &u);
 			if (size < 0)
 				return -EINVAL;
-
-			if (u >= PLANE_SIZE) {
-				u -= PLANE_SIZE;
-				*op++ = (wchar_t) (SURROGATE_PAIR |
-						((u >> 10) & SURROGATE_BITS));
-				*op++ = (wchar_t) (SURROGATE_PAIR |
-						SURROGATE_LOW |
-						(u & SURROGATE_BITS));
-			} else {
-				*op++ = (wchar_t) u;
-			}
 			s += size;
 			len -= size;
+
+			if (u >= PLANE_SIZE) {
+				if (maxlen < 2)
+					break;
+				u -= PLANE_SIZE;
+				put_utf16(op++, SURROGATE_PAIR |
+						((u >> 10) & SURROGATE_BITS),
+						endian);
+				put_utf16(op++, SURROGATE_PAIR |
+						SURROGATE_LOW |
+						(u & SURROGATE_BITS),
+						endian);
+				maxlen -= 2;
+			} else {
+				put_utf16(op++, u, endian);
+				maxlen--;
+			}
 		} else {
-			*op++ = *s++;
+			put_utf16(op++, *s++, endian);
 			len--;
+			maxlen--;
 		}
 	}
 	return op - pwcs;
diff --git a/include/linux/nls.h b/include/linux/nls.h
index d47beef..5dc635f 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -43,7 +43,7 @@
 	UTF16_BIG_ENDIAN
 };
 
-/* nls.c */
+/* nls_base.c */
 extern int register_nls(struct nls_table *);
 extern int unregister_nls(struct nls_table *);
 extern struct nls_table *load_nls(char *);
@@ -52,7 +52,8 @@
 
 extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
 extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
-extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf8s_to_utf16s(const u8 *s, int len,
+		enum utf16_endian endian, wchar_t *pwcs, int maxlen);
 extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
 		enum utf16_endian endian, u8 *s, int maxlen);
 
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d3d0c13..2f05a7f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1598,6 +1598,19 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* translate USB error codes to codes user space understands */
+static inline int usb_translate_errors(int error_code)
+{
+	switch (error_code) {
+	case 0:
+	case -ENOMEM:
+	case -ENODEV:
+		return error_code;
+	default:
+		return -EIO;
+	}
+}
+
 /* Events from the usb core */
 #define USB_DEVICE_ADD		0x0001
 #define USB_DEVICE_REMOVE	0x0002
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 03354d5..b2f62f3 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -99,7 +99,6 @@
 	 */
 	unsigned long		flags;
 #define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
-#define HCD_FLAG_SAW_IRQ		1
 #define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
 #define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
 #define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
@@ -110,7 +109,6 @@
 	 * be slightly faster than test_bit().
 	 */
 #define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
-#define HCD_SAW_IRQ(hcd)	((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
 #define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
 #define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
 #define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b29f70b..4267a9c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -58,11 +58,13 @@
  * @read_urb: pointer to the bulk in struct urb for this port.
  * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
  *	port.
+ * @bulk_in_buffers: pointers to the bulk in buffers for this port
+ * @read_urbs: pointers to the bulk in urbs for this port
+ * @read_urbs_free: status bitmap the for bulk in urbs
  * @bulk_out_buffer: pointer to the bulk out buffer for this port.
  * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
  * @write_urb: pointer to the bulk out struct urb for this port.
  * @write_fifo: kfifo used to buffer outgoing data
- * @write_urb_busy: port`s writing status
  * @bulk_out_buffers: pointers to the bulk out buffers for this port
  * @write_urbs: pointers to the bulk out urbs for this port
  * @write_urbs_free: status bitmap the for bulk out urbs
@@ -99,11 +101,14 @@
 	struct urb		*read_urb;
 	__u8			bulk_in_endpointAddress;
 
+	unsigned char		*bulk_in_buffers[2];
+	struct urb		*read_urbs[2];
+	unsigned long		read_urbs_free;
+
 	unsigned char		*bulk_out_buffer;
 	int			bulk_out_size;
 	struct urb		*write_urb;
 	struct kfifo		write_fifo;
-	int			write_urb_busy;
 
 	unsigned char		*bulk_out_buffers[2];
 	struct urb		*write_urbs[2];
@@ -340,7 +345,7 @@
 extern void usb_serial_generic_release(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
-extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
 						 gfp_t mem_flags);
 extern void usb_serial_generic_process_read_urb(struct urb *urb);
 extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,