| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "brcm,bcm7125"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mips-hpt-frequency = <202500000>; |
| |
| cpu@0 { |
| compatible = "brcm,bmips4380"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bmips4380"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| aliases { |
| uart0 = &uart0; |
| }; |
| |
| cpu_intc: cpu_intc { |
| #address-cells = <0>; |
| compatible = "mti,cpu-interrupt-controller"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| clocks { |
| uart_clk: uart_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <81000000>; |
| }; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| ranges = <0 0x10000000 0x01000000>; |
| |
| periph_intc: periph_intc@441400 { |
| compatible = "brcm,bcm7038-l1-intc"; |
| reg = <0x441400 0x30>, <0x441600 0x30>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpu_intc>; |
| interrupts = <2>, <3>; |
| }; |
| |
| sun_l2_intc: sun_l2_intc@401800 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x401800 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <23>; |
| }; |
| |
| gisb-arb@400000 { |
| compatible = "brcm,bcm7400-gisb-arb"; |
| reg = <0x400000 0xdc>; |
| native-endian; |
| interrupt-parent = <&sun_l2_intc>; |
| interrupts = <0>, <2>; |
| brcm,gisb-arb-master-mask = <0x2f7>; |
| brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", |
| "bsp_0", "rdc_0", "rptd_0", |
| "avd_0", "jtag_0"; |
| }; |
| |
| upg_irq0_intc: upg_irq0_intc@406780 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x406780 0x8>; |
| |
| brcm,int-map-mask = <0x44>; |
| brcm,int-fwd-mask = <0x70000>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <18>; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7125-sun-top-ctrl", "syscon"; |
| reg = <0x404000 0x60c>; |
| }; |
| |
| reboot { |
| compatible = "brcm,bcm7038-reboot"; |
| syscon = <&sun_top_ctrl 0x8 0x14>; |
| }; |
| |
| uart0: serial@406b00 { |
| compatible = "ns16550a"; |
| reg = <0x406b00 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <21>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@488300 { |
| compatible = "brcm,bcm7125-ehci", "generic-ehci"; |
| reg = <0x488300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <60>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@488400 { |
| compatible = "brcm,bcm7125-ohci", "generic-ohci"; |
| reg = <0x488400 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <61>; |
| status = "disabled"; |
| }; |
| }; |
| }; |