wl1271: Add config structure for FW init parameters
Add a configuration structure for RX path parameters, and set default
configuration values there.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index f08e509..5333a27 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -691,11 +691,193 @@
struct conf_sig_weights sig_weights;
};
+#define CONF_SR_ERR_TBL_MAX_VALUES 14
+
+struct conf_mart_reflex_err_table {
+ /*
+ * Length of the error table values table.
+ *
+ * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
+ */
+ u8 len;
+
+ /*
+ * Smart Reflex error table upper limit.
+ *
+ * Range: s8
+ */
+ s8 upper_limit;
+
+ /*
+ * Smart Reflex error table values.
+ *
+ * Range: s8
+ */
+ s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
+};
+
+enum {
+ CONF_REF_CLK_19_2_E,
+ CONF_REF_CLK_26_E,
+ CONF_REF_CLK_38_4_E,
+ CONF_REF_CLK_52_E
+};
+
+struct conf_general_parms {
+ /*
+ * RF Reference Clock type / speed
+ *
+ * Range: CONF_REF_CLK_*
+ */
+ u8 ref_clk;
+
+ /*
+ * Settling time of the reference clock after boot.
+ *
+ * Range: u8
+ */
+ u8 settling_time;
+
+ /*
+ * Flag defining whether clock is valid on wakeup.
+ *
+ * Range: 0 - not valid on wakeup, 1 - valid on wakeup
+ */
+ u8 clk_valid_on_wakeup;
+
+ /*
+ * DC-to-DC mode.
+ *
+ * Range: Unknown
+ */
+ u8 dc2dcmode;
+
+ /*
+ * Flag defining whether used as single or dual-band.
+ *
+ * Range: Unknown
+ */
+ u8 single_dual_band;
+
+ /*
+ * TX bip fem autodetect flag.
+ *
+ * Range: Unknown
+ */
+ u8 tx_bip_fem_autodetect;
+
+ /*
+ * TX bip gem manufacturer.
+ *
+ * Range: Unknown
+ */
+ u8 tx_bip_fem_manufacturer;
+
+ /*
+ * Settings flags.
+ *
+ * Range: Unknown
+ */
+ u8 settings;
+};
+
+#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
+#define CONF_NUMBER_OF_SUB_BANDS_5 7
+#define CONF_NUMBER_OF_RATE_GROUPS 6
+#define CONF_NUMBER_OF_CHANNELS_2_4 14
+#define CONF_NUMBER_OF_CHANNELS_5 35
+
+struct conf_radio_parms {
+ /*
+ * Static radio parameters for 2.4GHz
+ *
+ * Range: unknown
+ */
+ u8 rx_trace_loss;
+ u8 tx_trace_loss;
+ s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /*
+ * Static radio parameters for 5GHz
+ *
+ * Range: unknown
+ */
+ u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /*
+ * Dynamic radio parameters for 2.4GHz
+ *
+ * Range: unknown
+ */
+ s16 tx_ref_pd_voltage;
+ s8 tx_ref_power;
+ s8 tx_offset_db;
+
+ s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+ u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+ u8 rx_fem_insertion_loss;
+
+ /*
+ * Dynamic radio parameters for 5GHz
+ *
+ * Range: unknown
+ */
+ s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+ s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+ s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+ /* FIXME: this is inconsistent with the types for 2.4GHz */
+ s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+};
+
+#define CONF_SR_ERR_TBL_COUNT 3
+
+struct conf_init_settings {
+ /*
+ * Configure Smart Reflex error table values.
+ */
+ struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
+
+ /*
+ * Smart Reflex enable flag.
+ *
+ * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
+ */
+ u8 sr_enable;
+
+ /*
+ * Configure general parameters.
+ */
+ struct conf_general_parms genparam;
+
+ /*
+ * Configure radio parameters.
+ */
+ struct conf_radio_parms radioparam;
+
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
+ struct conf_init_settings init;
};
#endif