ASoC: davinci: let platform data define edma queue numbers
Currently the EDMA queue to be used by for servicing ASP through
internal RAM is fixed to EDMAQ_0 and that to service internal RAM
from external RAM is fixed to EDMAQ_1.
This may not be the desirable configuration on all platforms. For
example, on DM365, queue 0 has large fifo size and is more suitable
for video transfers. Having audio and video transfers on the same
queue may lead to starvation on audio side.
platform data as defined currently passes a queue number to the driver
but that remains unused inside the driver.
Fix this by defining one queue each for ASP and RAM transfers in the
platform data and using it inside the driver.
Since EDMAQ_0 maps to 0, thats the queue that will be used if
the asp queue number is not initialized. None of the platforms
currently utilize ping-pong transfers through internal RAM so that
functionality remains unchanged too.
This patch has been tested on DM644x and OMAP-L138 EVMs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index b251bc9..9e8932a 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -648,6 +648,8 @@
struct snd_platform_data *pdata = pdev->dev.platform_data;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *ioarea, *res;
+ enum dma_event_q asp_chan_q = EVENTQ_0;
+ enum dma_event_q ram_chan_q = EVENTQ_1;
int ret;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -676,7 +678,15 @@
pdata->sram_size_capture;
dev->clk_input_pin = pdata->clk_input_pin;
dev->i2s_accurate_sck = pdata->i2s_accurate_sck;
+ asp_chan_q = pdata->asp_chan_q;
+ ram_chan_q = pdata->ram_chan_q;
}
+
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].asp_chan_q = asp_chan_q;
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].ram_chan_q = ram_chan_q;
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].asp_chan_q = asp_chan_q;
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].ram_chan_q = ram_chan_q;
+
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;