jme: PHY Power control for new chip
After main chip rev 5, the hardware support more power saving
control registers.
Some Non-Linux drivers might turn off the phy power with new
interfaces, this patch makes it possible for Linux to turn it
on again.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index 32b2a9d..c3764fc 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -103,6 +103,37 @@
#define HALF_US 500 /* 500 ns */
#define JMESPIIOCTL SIOCDEVPRIVATE
+#define PCI_PRIV_PE1 0xE4
+
+enum pci_priv_pe1_bit_masks {
+ PE1_ASPMSUPRT = 0x00000003, /*
+ * RW:
+ * Aspm_support[1:0]
+ * (R/W Port of 5C[11:10])
+ */
+ PE1_MULTIFUN = 0x00000004, /* RW: Multi_fun_bit */
+ PE1_RDYDMA = 0x00000008, /* RO: ~link.rdy_for_dma */
+ PE1_ASPMOPTL = 0x00000030, /* RW: link.rx10s_option[1:0] */
+ PE1_ASPMOPTH = 0x000000C0, /* RW: 10_req=[3]?HW:[2] */
+ PE1_GPREG0 = 0x0000FF00, /*
+ * SRW:
+ * Cfg_gp_reg0
+ * [7:6] phy_giga BG control
+ * [5] CREQ_N as CREQ_N1 (CPPE# as CREQ#)
+ * [4:0] Reserved
+ */
+ PE1_GPREG0_PBG = 0x0000C000, /* phy_giga BG control */
+ PE1_GPREG1 = 0x00FF0000, /* RW: Cfg_gp_reg1 */
+ PE1_REVID = 0xFF000000, /* RO: Rev ID */
+};
+
+enum pci_priv_pe1_values {
+ PE1_GPREG0_ENBG = 0x00000000, /* en BG */
+ PE1_GPREG0_PDD3COLD = 0x00004000, /* giga_PD + d3cold */
+ PE1_GPREG0_PDPCIESD = 0x00008000, /* giga_PD + pcie_shutdown */
+ PE1_GPREG0_PDPCIEIDDQ = 0x0000C000, /* giga_PD + pcie_iddq */
+};
+
/*
* Dynamic(adaptive)/Static PCC values
*/
@@ -499,6 +530,7 @@
JME_PMCS = JME_MAC | 0x60, /* Power Management Control/Stat */
+ JME_PHY_PWR = JME_PHY | 0x24, /* New PHY Power Ctrl Register */
JME_PHY_CS = JME_PHY | 0x28, /* PHY Ctrl and Status Register */
JME_PHY_LINK = JME_PHY | 0x30, /* PHY Link Status Register */
JME_SMBCSR = JME_PHY | 0x40, /* SMB Control and Status */
@@ -835,6 +867,21 @@
};
/*
+ * New PHY Power Control Register
+ */
+enum jme_phy_pwr_bit_masks {
+ PHY_PWR_DWN1SEL = 0x01000000, /* Phy_giga.p_PWR_DOWN1_SEL */
+ PHY_PWR_DWN1SW = 0x02000000, /* Phy_giga.p_PWR_DOWN1_SW */
+ PHY_PWR_DWN2 = 0x04000000, /* Phy_giga.p_PWR_DOWN2 */
+ PHY_PWR_CLKSEL = 0x08000000, /*
+ * XTL_OUT Clock select
+ * (an internal free-running clock)
+ * 0: xtl_out = phy_giga.A_XTL25_O
+ * 1: xtl_out = phy_giga.PD_OSC
+ */
+};
+
+/*
* Giga PHY Status Registers
*/
enum jme_phy_link_bit_mask {
@@ -1191,6 +1238,11 @@
return device == PCI_DEVICE_ID_JMICRON_JMC250 && chiprev == 0x11;
}
+static inline int new_phy_power_ctrl(u8 chip_main_rev)
+{
+ return chip_main_rev >= 5;
+}
+
/*
* Function prototypes
*/