Merge tag 'omap-for-v4.1/prcm-dts-mfd-syscon-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late
Merge "urgent omap boot fix for v4.1 if MFD_SYSCON is not set" from Tony
Lindgren:
Urgent pull request for v4.1 to booting for custom kernel
.config files that do not have MFD_SYSCON set.
Omaps now have a dependency to MFD_SYSCON for system control
module generic register area and some clocks with the changes
done in omap-for-v4.1/prcm-dts branch.
This can be pulled on top of omap-for-v4.1/prcm-dts, or into
fixes for v4.1.
We already do have a slight MFD_SYSCON dependency for
REGULATOR_PBIAS for dual voltage MMC cards on the first MMC
bus for many devices, so from that point of view this can
also be merged separately from omap-for-v4.1/prcm-dts.
* tag 'omap-for-v4.1/prcm-dts-mfd-syscon-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 71daa35..eb102fb 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -404,8 +404,8 @@
be understood as an underflow into the highest possible value, -2 or
-10M etc. do not work, so it's not consistent.
- memory.low, memory.high, and memory.max will use the string
- "infinity" to indicate and set the highest possible value.
+ memory.low, memory.high, and memory.max will use the string "max" to
+ indicate and set the highest possible value.
5. Planned Changes
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
new file mode 100644
index 0000000..44aa3c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
@@ -0,0 +1,14 @@
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+
+Required properties:
+- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
+- reg: the register range of the MSCM CPU configuration registers
+
+Example:
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ }
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
new file mode 100644
index 0000000..669808b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -0,0 +1,33 @@
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+
+Required properties:
+- compatible: "fsl,vf610-mscm-ir"
+- reg: the register range of the MSCM Interrupt Router
+- fsl,cpucfg: The handle to the MSCM CPU configuration node, required
+ to get the current CPU ID
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Two cells, interrupt number and cells.
+ The hardware interrupt number according to interrupt
+ assignment of the interrupt router is required.
+ Flags get passed only when using GIC as parent. Flags
+ encoding as documented by the GIC bindings.
+- interrupt-parent: Should be the phandle for the interrupt controller of
+ the CPU the device tree is intended to be used on. This
+ is either the node of the GIC or NVIC controller.
+
+Example:
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ }
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
new file mode 100644
index 0000000..3a4e590
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -0,0 +1,79 @@
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible: Must be one of:
+ "ti,am3-scm"
+ "ti,am4-scm"
+ "ti,dm814-scrm"
+ "ti,dm816-scrm"
+ "ti,omap2-scm"
+ "ti,omap3-scm"
+ "ti,omap4-scm-core"
+ "ti,omap4-scm-padconf-core"
+ "ti,omap5-scm-core"
+ "ti,omap5-scm-padconf-core"
+ "ti,dra7-scm-core"
+- reg: Contains Control Module register address range
+ (base address and length)
+
+Optional properties:
+- clocks: clocks for this module
+- clockdomains: clockdomains for this module
+
+Examples:
+
+scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x230>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+}
+
+&scm_clocks {
+ mcbsp5_mux_fck: mcbsp5_mux_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x02d8>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
new file mode 100644
index 0000000..b4f8a16
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -0,0 +1,26 @@
+L4 interconnect bindings
+
+These bindings describe the OMAP SoCs L4 interconnect bus.
+
+Required properties:
+- compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
+ Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+ Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
+ Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+ Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
+ Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
+ Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
+ Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
+ Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
+ Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
+ Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
+- ranges : contains the IO map range for the bus
+
+Examples:
+
+l4: l4@48000000 {
+ compatible "ti,omap2-l4", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x100000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 79074da..3eb6d7a 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -10,14 +10,10 @@
Required properties:
- compatible: Must be one of:
"ti,am3-prcm"
- "ti,am3-scrm"
"ti,am4-prcm"
- "ti,am4-scrm"
"ti,omap2-prcm"
- "ti,omap2-scrm"
"ti,omap3-prm"
"ti,omap3-cm"
- "ti,omap3-scrm"
"ti,omap4-cm1"
"ti,omap4-prm"
"ti,omap4-cm2"
@@ -29,6 +25,8 @@
"ti,dra7-prm"
"ti,dra7-cm-core-aon"
"ti,dra7-cm-core"
+ "ti,dm814-prcm"
+ "ti,dm816-prcm"
- reg: Contains PRCM module register address range
(base address and length)
- clocks: clocks for this module
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index 63dd805..18729f6 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -1,7 +1,8 @@
* OMAP OCP2SCP - ocp interface to scp interface
properties:
-- compatible : Should be "ti,omap-ocp2scp"
+- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor
+ Should be "ti,omap-ocp2scp" for all others
- reg : Address and length of the register set for the device
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
new file mode 100644
index 0000000..ac23de8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
@@ -0,0 +1,71 @@
+OMAP 3 ISP Device Tree bindings
+===============================
+
+The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
+
+Required properties
+===================
+
+compatible : must contain "ti,omap3-isp"
+
+reg : the two registers sets (physical address and length) for the
+ ISP. The first set contains the core ISP registers up to
+ the end of the SBL block. The second set contains the
+ CSI PHYs and receivers registers.
+interrupts : the ISP interrupt specifier
+iommus : phandle and IOMMU specifier for the IOMMU that serves the ISP
+syscon : the phandle and register offset to the Complex I/O or CSI-PHY
+ register
+ti,phy-type : 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
+ 1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
+#clock-cells : Must be 1 --- the ISP provides two external clocks,
+ cam_xclka and cam_xclkb, at indices 0 and 1,
+ respectively. Please find more information on common
+ clock bindings in ../clock/clock-bindings.txt.
+
+Port nodes (optional)
+---------------------
+
+More documentation on these bindings is available in
+video-interfaces.txt in the same directory.
+
+reg : The interface:
+ 0 - parallel (CCDC)
+ 1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
+ CSI1 -- CSIb on 3430
+ 2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
+ CSI2 -- CSIa on 3430
+
+Optional properties
+===================
+
+vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
+vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
+
+Endpoint nodes
+--------------
+
+lane-polarities : lane polarity (required on CSI-2)
+ 0 -- not inverted; 1 -- inverted
+data-lanes : an array of data lanes from 1 to 3. The length can
+ be either 1 or 2. (required on CSI-2)
+clock-lanes : the clock lane (from 1 to 3). (required on CSI-2)
+
+
+Example
+=======
+
+ isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
new file mode 100644
index 0000000..65cc034
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -0,0 +1,59 @@
+Freescale i.MX General Power Controller
+=======================================
+
+The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
+domains.
+
+Required properties:
+- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain GPC interrupt request 1
+- pu-supply: Link to the LDO regulator powering the PU power domain
+- clocks: Clock phandles to devices in the PU power domain that need
+ to be enabled during domain power-up for reset propagation.
+- #power-domain-cells: Should be 1, see below:
+
+The gpc node is a power-controller as documented by the generic power domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+
+Example:
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ #power-domain-cells = <1>;
+ };
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains' property
+that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
+the power domain the device belongs to.
+
+Example of a device that is part of the PU power domain:
+
+ vpu: vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ /* ... */
+ power-domains = <&gpc 1>;
+ /* ... */
+ };
+
+The following DOMAIN_INDEX values are valid for i.MX6Q:
+ARM_DOMAIN 0
+PU_DOMAIN 1
+The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+DISPLAY_DOMAIN 2
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 342eedd..54c2a15 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,7 +4,27 @@
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- reg : address and length of the register space
+- interrupts or interrupts-extended : Should contain the uart interrupt
+ specifier or both the interrupt
+ controller phandle and interrupt
+ specifier.
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
Optional properties:
- clock-frequency : frequency of the clock input to the UART
+- dmas : DMA specifier, consisting of a phandle to the DMA controller
+ node and a DMA channel number.
+- dma-names : "rx" for receive channel, "tx" for transmit channel.
+
+Example:
+
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
index 1ab6bc8..f6a715e 100644
--- a/Documentation/devicetree/bindings/sound/omap-twl4030.txt
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -4,9 +4,9 @@
- compatible: "ti,omap-twl4030"
- ti,model: Name of the sound card (for example "omap3beagle")
- ti,mcbsp: phandle for the McBSP node
-- ti,codec: phandle for the twl4030 audio node
Optional properties:
+- ti,codec: phandle for the twl4030 audio node
- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl
- ti, jack-det-gpio: Jack detect GPIO
- ti,audio-routing: List of connections between audio components.
@@ -59,5 +59,4 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389ca13..f6a9f25 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -77,6 +77,7 @@
globalscale Globalscale Technologies, Inc.
gmt Global Mixed-mode Technology, Inc.
google Google, Inc.
+grinn Grinn
gumstix Gumstix, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index 1b528b2..fcf4d50 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -5,8 +5,8 @@
dlmfs is built with OCFS2 as it requires most of its infrastructure.
-Project web page: http://oss.oracle.com/projects/ocfs2
-Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+Project web page: http://ocfs2.wiki.kernel.org
+Tools web page: https://github.com/markfasheh/ocfs2-tools
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 28f8c08..4c49e54 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -8,8 +8,8 @@
You'll want to install the ocfs2-tools package in order to at least
get "mount.ocfs2" and "ocfs2_hb_ctl".
-Project web page: http://oss.oracle.com/projects/ocfs2
-Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+Project web page: http://ocfs2.wiki.kernel.org
+Tools git tree: https://github.com/markfasheh/ocfs2-tools
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..1668b52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6947,6 +6947,8 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
S: Maintained
F: arch/arm/*omap*/
+F: arch/arm/configs/omap1_defconfig
+F: arch/arm/configs/omap2plus_defconfig
F: drivers/i2c/busses/i2c-omap.c
F: drivers/irqchip/irq-omap-intc.c
F: drivers/mfd/*omap*.c
@@ -7077,6 +7079,7 @@
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
@@ -7213,8 +7216,7 @@
M: Mark Fasheh <mfasheh@suse.com>
M: Joel Becker <jlbec@evilplan.org>
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
-W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
+W: http://ocfs2.wiki.kernel.org
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
diff --git a/Makefile b/Makefile
index 9fab639..e6a9b1b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..fb1ee1c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -299,9 +299,11 @@
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
- imx6sl-evk.dtb
+ imx6sl-evk.dtb \
+ imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
+ imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
@@ -386,6 +388,8 @@
omap3-overo-storm-tobi.dtb \
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
+ omap3-pandora-600mhz.dtb \
+ omap3-pandora-1ghz.dtb \
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
@@ -401,7 +405,8 @@
am335x-evmsk.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb
+ am335x-lxm.dtb \
+ am335x-chiliboard.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 6cc25ed..2c6248d 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -195,6 +195,7 @@
&usb0 {
status = "okay";
+ dr_mode = "peripheral";
};
&usb1 {
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
new file mode 100644
index 0000000..310da20
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+ model = "AM335x Chiliboard";
+ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+ "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_gpio_pins>;
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ usb1_drvvbus: usb1_drvvbus {
+ pinctrl-single,pins = <
+ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ >;
+ };
+
+ sd_pins: pinmux_sd_card {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ led_gpio_pins: led_gpio_pins {
+ pinctrl-single,pins = <
+ 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ >;
+ };
+};
+
+&ldo4_reg {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+};
+
+&phy_sel {
+ rmii-clock-ext;
+};
+
+/* USB */
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_drvvbus>;
+
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* microSD */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ vmmc-supply = <&ldo4_reg>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
new file mode 100644
index 0000000..7e9a34d
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "am33xx.dtsi"
+
+/ {
+ model = "Grinn AM335x ChiliSOM";
+ compatible = "grinn,am335x-chilisom", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: nandflash_pins {
+ pinctrl-single,pins = <
+ 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3d";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+/* Ethernet MAC */
+&mac {
+ slaves = <1>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+/* NAND Flash */
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index a346645..5ed4ca6 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -213,7 +213,9 @@
pinctrl-0 = <&i2c0_pins>;
gpio@20 {
- compatible = "mcp,mcp23017";
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
reg = <0x20>;
};
@@ -222,7 +224,7 @@
};
eeprom@53 {
- compatible = "mcp,24c02";
+ compatible = "microchip,24c02";
reg = <0x53>;
pagesize = <8>;
};
@@ -297,8 +299,8 @@
| |-->0x004FFFFF-> Kernel end
| |-->0x00500000-> File system start
| |
- | |-->0x014FFFFF-> File system end
- | |-->0x01500000-> User data start
+ | |-->0x01FFFFFF-> File system end
+ | |-->0x02000000-> User data start
| |
| |-->0x03FFFFFF-> User data end
| |-->0x04000000-> Data storage start
@@ -327,12 +329,12 @@
partition@4 {
label = "rootfs";
- reg = <0x00500000 0x01000000>; /* 16MB */
+ reg = <0x00500000 0x01b00000>; /* 27MB */
};
partition@5 {
label = "user";
- reg = <0x01500000 0x02b00000>; /* 43MB */
+ reg = <0x02000000 0x02000000>; /* 32MB */
};
partition@6 {
@@ -343,7 +345,7 @@
};
&mac {
- dual_emac = <1>;
+ dual_emac;
status = "okay";
};
@@ -353,11 +355,13 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 712edce..236c78a 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index acd3705..21fcc44 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -83,20 +83,6 @@
};
};
- am33xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7fc>;
- };
-
- am33xx_pinmux: pinmux@44e10800 {
- compatible = "pinctrl-single";
- reg = <0x44e10800 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x7f>;
- };
-
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex. Since
@@ -111,35 +97,56 @@
ranges;
ti,hwmods = "l3_main";
- prcm: prcm@44e00000 {
- compatible = "ti,am3-prcm";
- reg = <0x44e00000 0x4000>;
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "ti,am3-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44c00000 0x280000>;
- prcm_clocks: clocks {
+ prcm: prcm@200000 {
+ compatible = "ti,am3-prcm";
+ reg = <0x200000 0x4000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@210000 {
+ compatible = "ti,am3-scm", "simple-bus";
+ reg = <0x210000 0x2000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x2000>;
+
+ am33xx_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@44e10000 {
- compatible = "ti,am3-scrm";
- reg = <0x44e10000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- cm: syscon@44e10000 {
- compatible = "ti,am33xx-controlmodule", "syscon";
- reg = <0x44e10000 0x800>;
};
intc: interrupt-controller@48200000 {
@@ -350,7 +357,7 @@
reg = <0x481cc000 0x2000>;
clocks = <&dcan0_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <52>;
status = "disabled";
};
@@ -361,7 +368,7 @@
reg = <0x481d0000 0x2000>;
clocks = <&dcan1_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <55>;
status = "disabled";
};
@@ -720,7 +727,7 @@
*/
interrupts = <40 41 42 43>;
ranges;
- syscon = <&cm>;
+ syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@4a101000 {
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index c90724b..f164dce 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -31,7 +31,7 @@
status = "disabled";
reg = <0x5c000000 0x30000>;
interrupts = <67 68 69 70>;
- syscon = <&omap3_scm_general>;
+ syscon = <&scm_conf>;
ti,davinci-ctrl-reg-offset = <0x10000>;
ti,davinci-ctrl-mod-reg-offset = <0>;
ti,davinci-ctrl-ram-offset = <0x20000>;
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index df489d3..518b8fd 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
emac_ick: emac_ick {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..48c9bea 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -57,22 +57,6 @@
cache-level = <2>;
};
- am43xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7f4>;
- };
-
- am43xx_pinmux: pinmux@44e10800 {
- compatible = "ti,am437-padconf", "pinctrl-single";
- reg = <0x44e10800 0x31c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
ocp {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
@@ -84,29 +68,58 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- prcm: prcm@44df0000 {
- compatible = "ti,am4-prcm";
- reg = <0x44df0000 0x11000>;
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "ti,am4-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44c00000 0x287000>;
- prcm_clocks: clocks {
+ prcm: prcm@1f0000 {
+ compatible = "ti,am4-prcm";
+ reg = <0x1f0000 0x11000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@210000 {
+ compatible = "ti,am4-scm", "simple-bus";
+ reg = <0x210000 0x4000>;
#address-cells = <1>;
- #size-cells = <0>;
- };
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x4000>;
- prcm_clockdomains: clockdomains {
- };
- };
+ am43xx_pinmux: pinmux@800 {
+ compatible = "ti,am437-padconf",
+ "pinctrl-single";
+ reg = <0x800 0x31c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
- scrm: scrm@44e10000 {
- compatible = "ti,am4-scrm";
- reg = <0x44e10000 0x2000>;
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
- scrm_clockdomains: clockdomains {
+ scm_clockdomains: clockdomains {
+ };
};
};
@@ -787,7 +800,7 @@
};
ocp2scp0: ocp2scp@483a8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -806,7 +819,7 @@
};
ocp2scp1: ocp2scp@483e8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -884,7 +897,7 @@
};
hdq: hdq@48347000 {
- compatible = "ti,am43xx-hdq";
+ compatible = "ti,am4372-hdq";
reg = <0x48347000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&func_12m_clk>;
@@ -933,7 +946,7 @@
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -944,7 +957,7 @@
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index f9a17e2..37834427 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -133,17 +133,17 @@
>;
};
- i2c1_pins_default: i2c1_pins_default {
+ i2c2_pins_default: i2c2_pins_default {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+ 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
>;
};
- i2c1_pins_sleep: i2c1_pins_sleep {
+ i2c2_pins_sleep: i2c2_pins_sleep {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
+ 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
@@ -254,7 +254,7 @@
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c0_pins_default>;
- pinctrl-1 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_sleep>;
clock-frequency = <400000>;
at24@50 {
@@ -262,17 +262,10 @@
pagesize = <64>;
reg = <0x50>;
};
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_default>;
- pinctrl-1 = <&i2c1_pins_default>;
- clock-frequency = <400000>;
tps: tps62362@60 {
compatible = "ti,tps62362";
+ reg = <0x60>;
regulator-name = "VDD_MPU";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1330000>;
@@ -284,6 +277,14 @@
};
};
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_default>;
+ pinctrl-1 = <&i2c2_pins_sleep>;
+ clock-frequency = <100000>;
+};
+
&epwmss0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..72f01bb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -69,7 +69,48 @@
};
};
- am43xx_pinmux: pinmux@44e10800 {
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
+ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
+ &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
+ &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
+
+ col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
+ &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
+ &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
+ &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x01000204 /* P4 */
+ 0x02000207 /* P7 */
+ 0x0300020a /* NUMERIC_STAR */
+ 0x00010202 /* P2 */
+ 0x01010205 /* P5 */
+ 0x02010208 /* P8 */
+ 0x03010200 /* P0 */
+ 0x00020203 /* P3 */
+ 0x01020206 /* P6 */
+ 0x02020209 /* P9 */
+ 0x0302020b /* NUMERIC_POUND */
+ 0x00030067 /* UP */
+ 0x0103006a /* RIGHT */
+ 0x0203006c /* DOWN */
+ 0x03030069>; /* LEFT */
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am43xx_pinmux {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -279,47 +320,6 @@
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
- };
-
- matrix_keypad: matrix_keypad@0 {
- compatible = "gpio-matrix-keypad";
- debounce-delay-ms = <5>;
- col-scan-delay-us = <2>;
-
- row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
- &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
- &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
- &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
-
- col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
- &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
- &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
- &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
-
- linux,keymap = <0x00000201 /* P1 */
- 0x01000204 /* P4 */
- 0x02000207 /* P7 */
- 0x0300020a /* NUMERIC_STAR */
- 0x00010202 /* P2 */
- 0x01010205 /* P5 */
- 0x02010208 /* P8 */
- 0x03010200 /* P0 */
- 0x00020203 /* P3 */
- 0x01020206 /* P6 */
- 0x02020209 /* P9 */
- 0x0302020b /* NUMERIC_POUND */
- 0x00030067 /* UP */
- 0x0103006a /* RIGHT */
- 0x0203006c /* DOWN */
- 0x03030069>; /* LEFT */
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 51 53 56 62 75 101 152 255>;
- default-brightness-level = <8>;
- };
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c7dc9da..44869aa 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 03750af..6a3621c 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -8,7 +8,6 @@
/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/clk/ti-dra7-atl.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -87,6 +86,7 @@
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
+ #cooling-cells = <2>;
};
extcon_usb1: extcon_usb1 {
@@ -442,6 +442,7 @@
pinctrl-0 = <&tmp102_pins_default>;
interrupt-parent = <&gpio7>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
};
};
@@ -560,3 +561,50 @@
&usb2 {
dr_mode = "peripheral";
};
+
+&cpu_trips {
+ cpu_alert1: cpu_alert1 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+};
+
+&cpu_cooling_maps {
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
+&thermal_zones {
+ board_thermal: board_thermal {
+ polling-delay-passive = <1250>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tmp102 0>;
+
+ board_trips: trips {
+ board_alert0: board_alert {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ board_crit: board_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ board_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&board_alert0>;
+ cooling-device =
+ <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 857d028..dee39c3 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -29,10 +29,22 @@
&dm816x_pinmux {
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */
- DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */
- DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */
- DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
+ DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
+ DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
+ DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
+ DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
+ >;
+ };
+
+ usb0_pins: pinmux_usb0_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
>;
};
};
@@ -127,3 +139,16 @@
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
};
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ mentor,multipoint = <0>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ mentor,multipoint = <0>;
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index d98d0f7..90c8207 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -97,10 +97,31 @@
/* Device Configuration Registers */
scm_conf: syscon@600 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x600 0x110>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x600 0x110>;
+
+ usb_phy0: usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+
+ usb_phy1: usb-phy@28 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x28 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
};
scrm_clocks: clocks {
@@ -357,26 +378,91 @@
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
};
usb1: usb@47401800 {
compatible = "ti,musb-am33xx";
- status = "disabled";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ #dma-channels = <30>;
+ #dma-requests = <256>;
};
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..a3c32e8 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -94,17 +94,101 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,dra7-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,dra7-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22c000>;
- prm_clocks: clocks {
+ scm: scm@2000 {
+ compatible = "ti,dra7-scm-core", "simple-bus";
+ reg = <0x2000 0x2000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x1400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0xe00 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ dra7_pmx_core: pinmux@1400 {
+ compatible = "ti,dra7-padconf",
+ "pinctrl-single";
+ reg = <0x1400 0x0464>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x3fffffff>;
+ };
};
- prm_clockdomains: clockdomains {
+ cm_core_aon: cm_core_aon@5000 {
+ compatible = "ti,dra7-cm-core-aon";
+ reg = <0x5000 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+
+ cm_core: cm_core@8000 {
+ compatible = "ti,dra7-cm-core";
+ reg = <0x8000 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,dra7-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x3f000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,dra7-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
};
};
@@ -177,36 +261,16 @@
};
};
- cm_core_aon: cm_core_aon@4a005000 {
- compatible = "ti,dra7-cm-core-aon";
- reg = <0x4a005000 0x2000>;
-
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_aon_clockdomains: clockdomains {
- };
- };
-
- cm_core: cm_core@4a008000 {
- compatible = "ti,dra7-cm-core";
- reg = <0x4a008000 0x3000>;
-
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
};
dra7_ctrl_core: ctrl_core@4a002000 {
@@ -219,28 +283,6 @@
reg = <0x4a002e00 0x7c>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0 0x4>;
- syscon = <&dra7_ctrl_general>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
- dra7_pmx_core: pinmux@4a003400 {
- compatible = "ti,dra7-padconf", "pinctrl-single";
- reg = <0x4a003400 0x0464>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x3fffffff>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -249,8 +291,8 @@
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
@@ -658,7 +700,6 @@
reg = <0x48820000 0x80>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
- ti,timer-dsp;
};
timer6: timer@48822000 {
@@ -666,8 +707,6 @@
reg = <0x48822000 0x80>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer7: timer@48824000 {
@@ -675,7 +714,6 @@
reg = <0x48824000 0x80>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
- ti,timer-dsp;
};
timer8: timer@48826000 {
@@ -683,8 +721,6 @@
reg = <0x48826000 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer9: timer@4803e000 {
@@ -706,7 +742,6 @@
reg = <0x48088000 0x80>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
- ti,timer-pwm;
};
timer13: timer@48828000 {
@@ -1090,8 +1125,8 @@
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
- clocks = <&sys_clkin1>;
- clock-names = "sysclk";
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
@@ -1410,7 +1445,7 @@
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+ syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
@@ -1420,12 +1455,23 @@
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+ syscon-raminit = <&scm_conf 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
};
};
+
+ thermal_zones: thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ };
+
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
};
/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e5a3d23..6ac8e36 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -20,6 +20,11 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 10173fa..eef981f4 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -31,6 +31,11 @@
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 4bdcbd6..2a9994f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1421,6 +1421,14 @@
ti,dividers = <1>, <8>;
};
+ clkout2_clk: clkout2_clk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&clkoutmux2_clk_mux>;
+ ti,bit-shift = <8>;
+ reg = <0x06b0>;
+ };
+
l3init_960m_gfclk: l3init_960m_gfclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 9c21b15..dd45e69 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -75,6 +75,27 @@
mux-int-port = <1>;
mux-ext-port = <4>;
};
+
+ wvga: display {
+ model = "CLAA057VC01CW";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&wvga_timings>;
+ display-timings {
+ wvga_timings: 640x480 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <45>;
+ hfront-porch = <114>;
+ hsync-len = <1>;
+ vback-porch = <33>;
+ vfront-porch = <11>;
+ vsync-len = <1>;
+ clock-frequency = <25200000>;
+ };
+ };
+ };
};
&audmux {
@@ -190,6 +211,33 @@
>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0xe0
+ MX25_PAD_LD1__LD1 0xe0
+ MX25_PAD_LD2__LD2 0xe0
+ MX25_PAD_LD3__LD3 0xe0
+ MX25_PAD_LD4__LD4 0xe0
+ MX25_PAD_LD5__LD5 0xe0
+ MX25_PAD_LD6__LD6 0xe0
+ MX25_PAD_LD7__LD7 0xe0
+ MX25_PAD_LD8__LD8 0xe0
+ MX25_PAD_LD9__LD9 0xe0
+ MX25_PAD_LD10__LD10 0xe0
+ MX25_PAD_LD11__LD11 0xe0
+ MX25_PAD_LD12__LD12 0xe0
+ MX25_PAD_LD13__LD13 0xe0
+ MX25_PAD_LD14__LD14 0xe0
+ MX25_PAD_LD15__LD15 0xe0
+ MX25_PAD_GPIO_E__LD16 0xe0
+ MX25_PAD_GPIO_F__LD17 0xe0
+ MX25_PAD_HSYNC__HSYNC 0xe0
+ MX25_PAD_VSYNC__VSYNC 0xe0
+ MX25_PAD_LSCLK__LSCLK 0xe0
+ MX25_PAD_OE_ACD__OE_ACD 0xe0
+ MX25_PAD_CONTRAST__CONTRAST 0xe0
+ >;
+ };
pinctrl_uart1: uart1grp {
fsl,pins = <
@@ -202,6 +250,16 @@
};
};
+&lcdc {
+ display = <&wvga>;
+ fsl,lpccr = <0x00a903ff>;
+ fsl,lscr1 = <0x00120300>;
+ fsl,dmacr = <0x00020010>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+};
+
&nfc {
nand-on-flash-bbt;
status = "okay";
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 88eebb1..7c4b9f2 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -17,48 +17,69 @@
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000
#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
+#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000
+#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000
#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
+#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000
+#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000
#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
+#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000
+#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000
#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
+#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000
+#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000
#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000
#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
+#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000
+#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000
#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000
#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
+#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
+#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000
+#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000
#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000
#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
@@ -133,20 +154,25 @@
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
+#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
+#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
+#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
+#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
+#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000
#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
@@ -212,26 +238,33 @@
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001
+#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000
#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000
#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
@@ -244,6 +277,7 @@
#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000
#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
@@ -257,26 +291,31 @@
#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001
+#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
@@ -284,32 +323,32 @@
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001
+#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000
#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000
#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001
+#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000
#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000
#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001
+#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000
#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001
#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000
#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001
#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000
#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001
#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000
#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001
#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
@@ -369,8 +408,8 @@
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
@@ -392,11 +431,11 @@
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
@@ -410,7 +449,7 @@
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002
#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
@@ -455,9 +494,18 @@
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_TX but that's wrong.
+ */
+#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_RX but that's wrong.
+ */
#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
@@ -471,30 +519,34 @@
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
-#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
-
#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002
#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000
#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002
#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000
#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000
#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
@@ -505,6 +557,7 @@
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
@@ -517,6 +570,7 @@
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
+
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 4b063b6..6951b66 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -488,6 +488,7 @@
interrupts = <54>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
@@ -497,6 +498,7 @@
interrupts = <55>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7198fe3..070e59c 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -78,7 +78,7 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 1f38a05..7ac4f1a 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -110,6 +110,13 @@
};
};
};
+
+ can0: can@80032000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ xceiver-supply = <®_can0_vcc>;
+ status = "okay";
+ };
};
apbx@80040000 {
@@ -130,6 +137,13 @@
status = "okay";
};
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
usbphy0: usbphy@8007c000 {
status = "okay";
};
@@ -143,7 +157,8 @@
ahb@80080000 {
usb0: usb@80080000 {
pinctrl-names = "default";
- pinctrl-0 = <&usb0_otg_apf28dev>;
+ pinctrl-0 = <&usb0_otg_apf28dev
+ &usb0_id_pins_b>;
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
@@ -156,7 +171,7 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac1_pins_a>;
- phy-reset-gpios = <&gpio0 23 0>;
+ phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
@@ -175,6 +190,14 @@
gpio = <&gpio1 23 1>;
enable-active-high;
};
+
+ reg_can0_vcc: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "can0_vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
};
leds {
@@ -200,8 +223,9 @@
user-button {
label = "User button";
- gpios = <&gpio0 17 0>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
+ gpio-key,wakeup;
};
};
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 47f68ac..25e25f8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -829,6 +829,19 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ spi3_pins_b: spi3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
usb0_pins_a: usb0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -1197,6 +1210,7 @@
interrupts = <92>;
clocks = <&clks 61>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 6932928..b6478e9 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -318,6 +318,7 @@
clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 620b0f0..e245713 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -197,6 +197,7 @@
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ dr_mode = "host";
status = "disabled";
};
@@ -205,6 +206,7 @@
reg = <0x53f80400 0x0200>;
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ dr_mode = "host";
status = "disabled";
};
@@ -213,6 +215,7 @@
reg = <0x53f80600 0x0200>;
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index c0116cf..f46fe9b 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -265,6 +265,7 @@
interrupts = <14>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
@@ -274,6 +275,7 @@
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
@@ -283,6 +285,7 @@
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index ff4fa7e..c3e3ca9 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -309,6 +309,7 @@
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
@@ -318,6 +319,7 @@
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
@@ -327,6 +329,7 @@
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index 9cd06e5..d4c4a22 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -83,3 +83,7 @@
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
+
+&pwm1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index b413e24..15203f0 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -72,3 +72,7 @@
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
+
+&pwm3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
index 58aa8f2..e0b7fe8 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts
@@ -1,5 +1,43 @@
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 44a0e67..7369d2d 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -1,6 +1,44 @@
/*
* Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
* Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index 9efd8b0..670bd8c 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -1,5 +1,43 @@
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
index c2bf847..0f60445 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -1,6 +1,44 @@
/*
* Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
* Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 93ec79b..399103b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -294,19 +294,21 @@
};
&mipi_dsi {
- port@2 {
- reg = <2>;
+ ports {
+ port@2 {
+ reg = <2>;
- mipi_mux_2: endpoint {
- remote-endpoint = <&ipu2_di0_mipi>;
+ mipi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_mipi>;
+ };
};
- };
- port@3 {
- reg = <3>;
+ port@3 {
+ reg = <3>;
- mipi_mux_3: endpoint {
- remote-endpoint = <&ipu2_di1_mipi>;
+ mipi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_mipi>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 6a524ca..d033bb1 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -1,8 +1,48 @@
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
ir_recv: ir-receiver {
@@ -66,6 +106,18 @@
spdif-controller = <&spdif>;
spdif-out;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_gpio_key>;
+ pinctrl-names = "default";
+
+ button_0 {
+ label = "Button 0";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
};
&hdmi {
@@ -170,9 +222,19 @@
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
>;
};
+
+ pinctrl_gpio_key: gpio-key {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059
+ >;
+ };
};
};
+&pwm1 {
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62841e8..151a3db 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -1,5 +1,43 @@
/*
* Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"
@@ -50,6 +88,19 @@
};
};
+ sound-sgtl5000 {
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "On-board Codec";
+ mux-ext-port = <5>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
@@ -59,6 +110,10 @@
};
};
+&audmux {
+ status = "okay";
+};
+
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
@@ -75,16 +130,24 @@
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-
- /*
- * Not fitted on Carrier-1 board... yet
status = "okay";
+ /* Pro baseboard model */
rtc: pcf8523@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
- */
+
+ /* Pro baseboard model */
+ sgtl5000: sgtl5000@0a {
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
};
&i2c2 {
@@ -129,6 +192,20 @@
>;
};
+ pinctrl_hummingboard_pwm1: pwm1grp {
+ fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+ };
+
+ pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
@@ -168,12 +245,28 @@
};
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&usbh1 {
disable-over-current;
vbus-supply = <®_usbh1_vbus>;
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index db9f45b..4a18203 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -3,6 +3,44 @@
*
* This describes the hookup for an AR8035 to the iMX6 on the SolidRun
* MicroSOM.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
&fec {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index 79eac68..349f82b 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -1,5 +1,43 @@
/*
* Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
&iomuxc {
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 009abd6..46b2fed 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -182,6 +182,34 @@
};
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ max7310_a: gpio@30 {
+ compatible = "maxim,max7310";
+ reg = <0x30>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ max7310_b: gpio@32 {
+ compatible = "maxim,max7310";
+ reg = <0x32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ max7310_c: gpio@34 {
+ compatible = "maxim,max7310";
+ reg = <0x34>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
@@ -265,6 +293,13 @@
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_pwm3: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index d6c69ec..f74a8de 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -53,6 +53,7 @@
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
@@ -82,7 +83,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
dma_apbh: dma-apbh@00110000 {
@@ -122,6 +123,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
+ interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_TWD>;
};
@@ -357,6 +359,7 @@
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM1>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm2: pwm@02084000 {
@@ -367,6 +370,7 @@
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM2>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm3: pwm@02088000 {
@@ -377,6 +381,7 @@
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM3>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm4: pwm@0208c000 {
@@ -387,6 +392,7 @@
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM4>;
clock-names = "ipg", "per";
+ status = "disabled";
};
can1: flexcan@02090000 {
@@ -598,7 +604,7 @@
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
- regulator-always-on;
+ regulator-enable-ramp-delay = <150>;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
@@ -658,7 +664,7 @@
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -693,8 +699,19 @@
gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ #power-domain-cells = <1>;
};
gpr: iomuxc-gpr@020e0000 {
@@ -845,6 +862,7 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
@@ -854,6 +872,7 @@
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
@@ -863,6 +882,7 @@
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
@@ -1022,19 +1042,24 @@
reg = <0x021e0000 0x4000>;
status = "disabled";
- port@0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- mipi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_mipi>;
+ port@0 {
+ reg = <0>;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
};
- };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- mipi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_mipi>;
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
new file mode 100644
index 0000000..64f7dec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "WaRP Board";
+ compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 0>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 0>;
+ enable-active-high;
+ };
+
+ reg_1p8v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
+ <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
+ <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6sl-warp {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1
+ MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1
+ MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1
+ MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1
+ MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 36ab8e0..a78e715 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -72,6 +72,7 @@
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
@@ -95,7 +96,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
ocram: sram@00900000 {
@@ -568,7 +569,7 @@
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -603,7 +604,14 @@
gpc: gpc@020dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+ <&clks IMX6SL_CLK_GPU2D_PODF>;
+ #power-domain-cells = <1>;
};
gpr: iomuxc-gpr@020e0000 {
@@ -699,6 +707,7 @@
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
new file mode 100644
index 0000000..c76b87c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB RevA Board";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&qspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi2>;
+ status = "okay";
+
+ flash0: s25fl128s@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+
+ flash1: s25fl128s@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 32f07d6..0bfc4e7 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -1,197 +1,40 @@
/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
+#include "imx6sx-sdb.dtsi"
/ {
- model = "Freescale i.MX6 SoloX SDB Board";
- compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vcc_sd3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg2_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg2>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_psu_5v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "PSU-5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_lcd_3v3: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-3v3";
- gpio = <&gpio3 27 0>;
- enable-active-high;
- };
-
- reg_peri_3v3: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_peri_3v3>;
- regulator-name = "peri_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- reg_enet_3v3: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_3v3>;
- regulator-name = "enet_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- sound {
- compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
- model = "wm8962-audio";
- ssi-controller = <&ssi2>;
- audio-codec = <&codec>;
- audio-routing =
- "Headphone Jack", "HPOUTL",
- "Headphone Jack", "HPOUTR",
- "Ext Spk", "SPKOUTL",
- "Ext Spk", "SPKOUTR",
- "AMIC", "MICBIAS",
- "IN3R", "AMIC";
- mux-int-port = <2>;
- mux-ext-port = <6>;
- };
+ model = "Freescale i.MX6 SoloX SDB RevB Board";
};
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-supply = <®_enet_3v3>;
- phy-mode = "rgmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
- };
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
- phy-handle = <ðphy2>;
- status = "okay";
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
};
&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
pmic: pfuze100@08 {
- compatible = "fsl,pfuze100";
+ compatible = "fsl,pfuze200";
reg = <0x08>;
regulators {
@@ -203,14 +46,6 @@
regulator-ramp-delay = <6250>;
};
- sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
@@ -232,11 +67,6 @@
regulator-always-on;
};
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
@@ -292,401 +122,24 @@
};
};
-&i2c4 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4>;
- status = "okay";
-
- codec: wm8962@1a {
- compatible = "wlf,wm8962";
- reg = <0x1a>;
- clocks = <&clks IMX6SX_CLK_AUDIO>;
- DCVDD-supply = <&vgen4_reg>;
- DBVDD-supply = <&vgen4_reg>;
- AVDD-supply = <&vgen4_reg>;
- CPVDD-supply = <&vgen4_reg>;
- MICVDD-supply = <&vgen3_reg>;
- PLLVDD-supply = <&vgen4_reg>;
- SPKVDD1-supply = <®_psu_5v>;
- SPKVDD2-supply = <®_psu_5v>;
- };
-};
-
-&lcdif1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
- status = "okay";
-
- display0: display0 {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&snvs_poweroff {
- status = "okay";
-};
-
&qspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: s25fl128s@0 {
+ flash0: n25q256a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl128s";
- spi-max-frequency = <66000000>;
};
- flash1: s25fl128s@1 {
+ flash1: n25q256a@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
reg = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl128s";
- spi-max-frequency = <66000000>;
- };
-};
-
-&ssi2 {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart5 { /* for bluetooth */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
- status = "okay";
-};
-
-&usbotg1 {
- vbus-supply = <®_usb_otg1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1_id>;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <®_usb_otg2_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- non-removable;
- no-1-8-v;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <&vcc_sd3>;
- status = "okay";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&iomuxc {
- imx6x-sdb {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
- MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
- MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
- MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
- MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
- >;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
- MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
- MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
- MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
- MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
- MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
- MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
- MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
- MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
- MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
- MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
- MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
- MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
- MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
- MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
- >;
- };
-
- pinctrl_enet_3v3: enet3v3grp {
- fsl,pins = <
- MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
- MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
- MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
- MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
- MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
- MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
- MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
- MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
- MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
- MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
- MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
- MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
- >;
- };
-
- pinctrl_gpio_keys: gpio_keysgrp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
- MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
- MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_i2c4: i2c4grp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
- MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_lcd: lcdgrp {
- fsl,pins = <
- MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
- MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
- MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
- MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
- MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
- MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
- MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
- MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
- MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
- MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
- MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
- MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
- MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
- MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
- MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
- MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
- MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
- MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
- MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
- MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
- MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
- MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
- MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
- MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
- MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
- MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
- MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
- >;
- };
-
- pinctrl_peri_3v3: peri3v3grp {
- fsl,pins = <
- MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
- >;
- };
-
- pinctrl_pwm3: pwm3grp-1 {
- fsl,pins = <
- MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
- >;
- };
-
- pinctrl_qspi2: qspi2grp {
- fsl,pins = <
- MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
- MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
- MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
- MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
- MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
- MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
- MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
- MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
- MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
- MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
- MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
- MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
- >;
- };
-
- pinctrl_vcc_sd3: vccsd3grp {
- fsl,pins = <
- MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
- MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
- MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
- MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
- >;
- };
-
- pinctrl_usb_otg1: usbotg1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
- >;
- };
-
- pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usb_otg2: usbot2ggrp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
- MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
- MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
- MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
- MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
- MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
- MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
- MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
- >;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
- MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
- MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
- MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
- MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
- MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
- MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
- MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
- >;
- };
};
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
new file mode 100644
index 0000000..cef04ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -0,0 +1,562 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_sd3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_psu_5v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "PSU-5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_lcd_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio3 27 0>;
+ enable-active-high;
+ };
+
+ reg_peri_3v3: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_enet_3v3: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3v3>;
+ regulator-name = "enet_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <6>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-supply = <®_enet_3v3>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SX_CLK_AUDIO>;
+ DCVDD-supply = <&vgen4_reg>;
+ DBVDD-supply = <&vgen4_reg>;
+ AVDD-supply = <&vgen4_reg>;
+ CPVDD-supply = <&vgen4_reg>;
+ MICVDD-supply = <&vgen3_reg>;
+ PLLVDD-supply = <&vgen4_reg>;
+ SPKVDD1-supply = <®_psu_5v>;
+ SPKVDD2-supply = <®_psu_5v>;
+ };
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&vcc_sd3>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6x-sdb {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
+ MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
+ MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
+ MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
+ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ >;
+ };
+
+ pinctrl_enet_3v3: enet3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+ MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
+ MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
+ pinctrl_peri_3v3: peri3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_qspi2: qspi2grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
+ MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
+ MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
+ MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
+ MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
+ MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
+ MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
+ MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
+ MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
+ MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
+ MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
+ MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg2: usbot2ggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 7a24fee..708175d 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -88,6 +88,7 @@
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
@@ -131,7 +132,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
pmu {
@@ -666,7 +667,7 @@
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -700,7 +701,10 @@
gpc: gpc@020dc000 {
compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
};
iomuxc: iomuxc@020e0000 {
@@ -763,6 +767,7 @@
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
fsl,anatop = <&anatop>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 59d1c29..578fa2a 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -87,8 +87,8 @@
<14>,
<15>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <64>;
+ dma-channels = <32>;
+ dma-requests = <64>;
};
i2c1: i2c@48070000 {
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e2b2e93..5b9a376 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -14,45 +14,63 @@
compatible = "ti,omap2420", "ti,omap2";
ocp {
- prcm: prcm@48008000 {
- compatible = "ti,omap2-prcm";
- reg = <0x48008000 0x1000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@48000000 {
- compatible = "ti,omap2-scrm";
- reg = <0x48000000 0x1000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@48004000 {
- compatible = "ti,omap-counter32k";
- reg = <0x48004000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap2420_pmx: pinmux@48000030 {
- compatible = "ti,omap2420-padconf", "pinctrl-single";
- reg = <0x48000030 0x0113>;
+ l4: l4@48000000 {
+ compatible = "ti,omap2-l4", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x100000>;
+
+ prcm: prcm@8000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x8000 0x1000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@0 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x1000>;
+
+ omap2420_pmx: pinmux@30 {
+ compatible = "ti,omap2420-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
};
gpio1: gpio@48018000 {
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
index 805f75d..93fed68 100644
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -8,12 +8,12 @@
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
mcbsp3_mux_fck: mcbsp3_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp3_fck: mcbsp3_fck {
@@ -27,7 +27,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp4_fck: mcbsp4_fck {
@@ -41,7 +41,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <4>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp5_fck: mcbsp5_fck {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 0dc8de2..11a7963 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -14,60 +14,73 @@
compatible = "ti,omap2430", "ti,omap2";
ocp {
- prcm: prcm@49006000 {
- compatible = "ti,omap2-prcm";
- reg = <0x49006000 0x1000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@49002000 {
- compatible = "ti,omap2-scrm";
- reg = <0x49002000 0x1000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@49020000 {
- compatible = "ti,omap-counter32k";
- reg = <0x49020000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap2430_pmx: pinmux@49002030 {
- compatible = "ti,omap2430-padconf", "pinctrl-single";
- reg = <0x49002030 0x0154>;
+ l4_wkup: l4_wkup@49000000 {
+ compatible = "ti,omap2-l4-wkup", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
- };
+ #size-cells = <1>;
+ ranges = <0 0x49000000 0x31000>;
- omap2_scm_general: tisyscon@49002270 {
- compatible = "syscon";
- reg = <0x49002270 0x240>;
- };
+ prcm: prcm@6000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x6000 0x1000>;
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x230 0x4>;
- syscon = <&omap2_scm_general>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@2000 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ omap2430_pmx: pinmux@30 {
+ compatible = "ti,omap2430-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x240>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x230 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ counter32k: counter@20000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x20000 0x20>;
+ ti,hwmods = "counter_32k";
};
};
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
index a1365ca..63965b8 100644
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -7,13 +7,13 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
mcbsp1_mux_fck: mcbsp1_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x0274>;
+ reg = <0x4>;
};
mcbsp1_fck: mcbsp1_fck {
@@ -27,7 +27,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <6>;
- reg = <0x0274>;
+ reg = <0x4>;
};
mcbsp2_fck: mcbsp2_fck {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 25f7b0a..da1464b 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -60,7 +60,6 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
gpio_keys {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index c792391..28f99a1 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -71,7 +71,6 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
gpio_keys {
@@ -379,3 +378,55 @@
};
};
};
+
+&gpmc {
+ status = "ok";
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
+
+ /* Chip select 0 */
+ nand@0,0 {
+ reg = <0 0 4>; /* NAND I/O window, 4 bytes */
+ interrupts = <20>;
+ ti,nand-ecc-opt = "ham1";
+ nand-bus-width = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpmc,device-width = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+ partition@1c0000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index d9e92b6..046cd77 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -16,7 +16,6 @@
ti,model = "cm-t35";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 169037e..134d3f2 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -48,7 +48,6 @@
ti,model = "devkit8000";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
ti,audio-routing =
"Ext Spk", "PREDRIVEL",
"Ext Spk", "PREDRIVER",
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fb3a696..b9f6881 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -46,7 +46,6 @@
ti,model = "gta04";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
spi_lcd {
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 8a63ad2..d5e5cd4 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -22,7 +22,6 @@
compatible = "ti,omap-twl4030";
ti,model = "igep2";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
vdd33: regulator-vdd33 {
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index e81fb65..e631333 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -38,7 +38,6 @@
ti,model = "lilly-a83x";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
reg_vcc3: vcc3 {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 9938b5d..f2e2139 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -16,3 +16,40 @@
model = "Nokia N9";
compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <(16 * 64)>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <1 3>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 6040327..bbea307 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,13 +9,34 @@
/dts-v1/;
-#include "omap34xx-hs.dtsi"
+#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
+/*
+ * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
+ * for omap AES HW crypto support. When linux kernel try to access memory of AES
+ * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
+ * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
+ * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
+ * There is "unofficial" version of bootloader which enables AES in L3 firewall
+ * but it is not widely used and to prevent kernel crash rather AES is disabled.
+ * There is also no runtime detection code if AES is disabled in L3 firewall...
+ */
+&aes {
+ status = "disabled";
+};
+
/ {
model = "Nokia N900";
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+ aliases {
+ i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
@@ -704,7 +725,7 @@
compatible = "smsc,lan91c94";
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
- reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
+ reg = <1 0 0xf>; /* 16 byte IO range */
bank-width = <2>;
pinctrl-names = "default";
pinctrl-0 = <ðernet_pins>;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index c41db94..800b379 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-#include "omap36xx-hs.dtsi"
+#include "omap36xx.dtsi"
/ {
cpus {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 261c558..0885b34 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -16,3 +16,40 @@
model = "Nokia N950";
compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <(16 * 64)>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <3 1>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index d36bf02..18e1649 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -27,7 +27,6 @@
ti,model = "overo";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
/* HS USB Port 2 Power */
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
new file mode 100644
index 0000000..9619a28
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * device tree for OpenPandora 1GHz with DM3730
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console 1GHz";
+
+ compatible = "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: pinmux_control_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */
+ OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */
+ OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */
+
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
new file mode 100644
index 0000000..fb803a7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * device tree for OpenPandora with OMAP3530
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console";
+
+ compatible = "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: pinmux_control_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
new file mode 100644
index 0000000..782ab1f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * Common device tree include for OpenPandora devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ aliases {
+ display0 = &lcd;
+ };
+
+ tv: connector@1 {
+ compatible = "connector-analog-tv";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ gpio-leds {
+
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led@1 {
+ label = "pandora::sd1";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "pandora::sd2";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "pandora::bluetooth";
+ gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "pandora::wifi";
+ gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
+ linux,default-trigger = "mmc2";
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ up-button {
+ label = "up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
+ gpio-key,wakeup;
+ };
+
+ down-button {
+ label = "down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
+ gpio-key,wakeup;
+ };
+
+ left-button {
+ label = "left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
+ gpio-key,wakeup;
+ };
+
+ right-button {
+ label = "right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
+ gpio-key,wakeup;
+ };
+
+ pageup-button {
+ label = "game 1";
+ linux,code = <KEY_PAGEUP>;
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
+ gpio-key,wakeup;
+ };
+
+ pagedown-button {
+ label = "game 3";
+ linux,code = <KEY_PAGEDOWN>;
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
+ gpio-key,wakeup;
+ };
+
+ home-button {
+ label = "game 4";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
+ gpio-key,wakeup;
+ };
+
+ end-button {
+ label = "game 2";
+ linux,code = <KEY_END>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
+ gpio-key,wakeup;
+ };
+
+ right-shift {
+ label = "l";
+ linux,code = <KEY_RIGHTSHIFT>;
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
+ gpio-key,wakeup;
+ };
+
+ kp-plus {
+ label = "l2";
+ linux,code = <KEY_KPPLUS>;
+ gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
+ gpio-key,wakeup;
+ };
+
+ right-ctrl {
+ label = "r";
+ linux,code = <KEY_RIGHTCTRL>;
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
+ gpio-key,wakeup;
+ };
+
+ kp-minus {
+ label = "r2";
+ linux,code = <KEY_KPMINUS>;
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
+ gpio-key,wakeup;
+ };
+
+ left-ctrl {
+ label = "ctrl";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
+ gpio-key,wakeup;
+ };
+
+ hold {
+ label = "hold";
+ linux,code = <KEY_COFFEE>;
+ gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
+ gpio-key,wakeup;
+ };
+
+ left-alt {
+ label = "alt";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
+ gpio-key,wakeup;
+ };
+
+ lid {
+ label = "lid";
+ linux,code = <0x00>; /* SW_LID lid shut */
+ linux,input-type = <0x05>; /* EV_SW */
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
+ };
+ };
+};
+
+&omap3_pmx_core {
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ led_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */
+ >;
+ };
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */
+ >;
+ };
+
+};
+
+&omap3_pmx_core2 {
+ /* define in CPU specific file that includes this one
+ * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
+ */
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-reset";
+ ti,use_poweroff;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <6>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(0, 1, KEY_8)
+ MATRIX_KEY(0, 2, KEY_I)
+ MATRIX_KEY(0, 3, KEY_J)
+ MATRIX_KEY(0, 4, KEY_N)
+ MATRIX_KEY(0, 5, KEY_M)
+ MATRIX_KEY(1, 0, KEY_0)
+ MATRIX_KEY(1, 1, KEY_7)
+ MATRIX_KEY(1, 2, KEY_U)
+ MATRIX_KEY(1, 3, KEY_H)
+ MATRIX_KEY(1, 4, KEY_B)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(2, 0, KEY_BACKSPACE)
+ MATRIX_KEY(2, 1, KEY_6)
+ MATRIX_KEY(2, 2, KEY_Y)
+ MATRIX_KEY(2, 3, KEY_G)
+ MATRIX_KEY(2, 4, KEY_V)
+ MATRIX_KEY(2, 5, KEY_FN)
+ MATRIX_KEY(3, 0, KEY_O)
+ MATRIX_KEY(3, 1, KEY_5)
+ MATRIX_KEY(3, 2, KEY_T)
+ MATRIX_KEY(3, 3, KEY_F)
+ MATRIX_KEY(3, 4, KEY_C)
+ MATRIX_KEY(4, 0, KEY_P)
+ MATRIX_KEY(4, 1, KEY_4)
+ MATRIX_KEY(4, 2, KEY_R)
+ MATRIX_KEY(4, 3, KEY_D)
+ MATRIX_KEY(4, 4, KEY_X)
+ MATRIX_KEY(5, 0, KEY_K)
+ MATRIX_KEY(5, 1, KEY_3)
+ MATRIX_KEY(5, 2, KEY_E)
+ MATRIX_KEY(5, 3, KEY_S)
+ MATRIX_KEY(5, 4, KEY_Z)
+ MATRIX_KEY(6, 0, KEY_L)
+ MATRIX_KEY(6, 1, KEY_2)
+ MATRIX_KEY(6, 2, KEY_W)
+ MATRIX_KEY(6, 3, KEY_A)
+ MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
+ MATRIX_KEY(7, 0, KEY_ENTER)
+ MATRIX_KEY(7, 1, KEY_1)
+ MATRIX_KEY(7, 2, KEY_Q)
+ MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
+ MATRIX_KEY(7, 4, KEY_LEFTBRACE )
+ >;
+};
+
+/* backup battery charger */
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+/* MMC2 */
+&vmmc2 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+/* LCD */
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+/* USB Host PHY */
+&vaux2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+/* available on expansion connector */
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* ADS7846 and nubs */
+&vaux4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* power audio DAC and LID sensor */
+&vsim {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ /* no clients so we should disable clock */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ bq27500@55 {
+ compatible = "ti,bq27500";
+ reg = <0x55>;
+ };
+
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc2>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
+};
+
+/* bluetooth*/
+&uart1 {
+};
+
+/* spare (expansion connector) */
+&uart2 {
+};
+
+/* console (expansion connector) */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
+
+ x-loader@0 {
+ label = "xloader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "uboot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "uboot-env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "boot";
+ reg = <0x280000 0xa00000>;
+ };
+
+ filesystem@680000 {
+ label = "rootfs";
+ reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 0>; /* GPIO_94 */
+ pendown-gpio = <&gpio3 30 0>;
+ vcc-supply = <&vaux4>;
+
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ linux,wakeup;
+ };
+
+ lcd: lcd@1 {
+ reg = <1>; /* CS1 */
+ compatible = "omapdss,tpo,td043mtea1";
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */
+ vcc-supply = <&vaux1>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+
+};
+
+/* n/a - used as GPIOs */
+&mcbsp1 {
+};
+
+/* audio DAC */
+&mcbsp2 {
+};
+
+/* bluetooth */
+&mcbsp3 {
+};
+
+/* to twl4030*/
+&mcbsp4 {
+};
+
+&venc {
+ status = "ok";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "ok";
+ vdds_dsi-supply = <&vpll2>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index e89820a..7bd8d9a 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -8,7 +8,16 @@
*/
/dts-v1/;
-#include "omap34xx-hs.dtsi"
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
/ {
cpus {
@@ -45,7 +54,6 @@
/* McBSP2 is used for onboard sound, same as on beagle */
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
/* Regulator to enable/switch the vcc of the Wifi module */
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..02cd996 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -87,6 +87,60 @@
ranges;
ti,hwmods = "l3_main";
+ l4_core: l4@48000000 {
+ compatible = "ti,omap3-l4-core", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x1000000>;
+
+ scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+
+ omap3_pmx_wkup: pinmux@a00 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0xa00 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+ };
+ };
+
aes: aes@480c5000 {
compatible = "ti,omap3-aes";
ti,hwmods = "aes";
@@ -121,19 +175,6 @@
};
};
- scrm: scrm@48002000 {
- compatible = "ti,omap3-scrm";
- reg = <0x48002000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
@@ -155,41 +196,14 @@
<14>,
<15>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <96>;
- };
-
- omap3_pmx_core: pinmux@48002030 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_pmx_wkup: pinmux@48002a00 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a00 0x5c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_scm_general: tisyscon@48002270 {
- compatible = "syscon";
- reg = <0x48002270 0x2f0>;
+ dma-channels = <32>;
+ dma-requests = <96>;
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0x2b0 0x4>;
- syscon = <&omap3_scm_general>;
+ syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi
deleted file mode 100644
index 1ff6264..0000000
--- a/arch/arm/boot/dts/omap34xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap34xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
- status = "disabled";
-};
-
-&sham {
- status = "disabled";
-};
-
-&timer12 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 3819c1e9..4f6b2d5 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
@@ -37,6 +39,21 @@
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x017c>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0xdc>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi
deleted file mode 100644
index 2c7febb..0000000
--- a/arch/arm/boot/dts/omap36xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap36xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
- status = "disabled";
-};
-
-&sham {
- status = "disabled";
-};
-
-&timer12 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 541704a..86253de 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
@@ -69,6 +71,21 @@
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 5c37500..bbba5bd 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -79,13 +79,14 @@
clock-div = <1>;
};
};
-&scrm_clocks {
+
+&scm_clocks {
mcbsp5_mux_fck: mcbsp5_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <4>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp5_fck: mcbsp5_fck {
@@ -99,7 +100,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x0274>;
+ reg = <0x04>;
};
mcbsp1_fck: mcbsp1_fck {
@@ -113,7 +114,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <6>;
- reg = <0x0274>;
+ reg = <0x04>;
};
mcbsp2_fck: mcbsp2_fck {
@@ -126,7 +127,7 @@
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp3_fck: mcbsp3_fck {
@@ -140,7 +141,7 @@
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp4_fck: mcbsp4_fck {
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index cb9458f..ab7f87a 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -18,7 +18,7 @@
/* sensor ID */
thermal-sensors = <&bandgap 0>;
- trips {
+ cpu_trips: trips {
cpu_alert0: cpu_alert {
temperature = <100000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
@@ -31,7 +31,7 @@
};
};
- cooling-maps {
+ cpu_cooling_maps: cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..cf2681b 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -114,99 +114,141 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- cm1: cm1@4a004000 {
- compatible = "ti,omap4-cm1";
- reg = <0x4a004000 0x2000>;
-
- cm1_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm1_clockdomains: clockdomains {
- };
- };
-
- prm: prm@4a306000 {
- compatible = "ti,omap4-prm";
- reg = <0x4a306000 0x3000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-
- prm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prm_clockdomains: clockdomains {
- };
- };
-
- cm2: cm2@4a008000 {
- compatible = "ti,omap4-cm2";
- reg = <0x4a008000 0x3000>;
-
- cm2_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm2_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@4a30a000 {
- compatible = "ti,omap4-scrm";
- reg = <0x4a30a000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4a304000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4a304000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap4_pmx_core: pinmux@4a100040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
- reg = <0x4a100040 0x0196>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,omap4-l4-cfg", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
- omap4_pmx_wkup: pinmux@4a31e040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
- reg = <0x4a31e040 0x0038>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x1000000>;
- omap4_padconf_global: tisyscon@4a1005a0 {
- compatible = "syscon";
- reg = <0x4a1005a0 0x170>;
- };
+ cm1: cm1@4000 {
+ compatible = "ti,omap4-cm1";
+ reg = <0x4000 0x2000>;
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x60 0x4>;
- syscon = <&omap4_padconf_global>;
- pbias_mmc_reg: pbias_mmc_omap4 {
- regulator-name = "pbias_mmc_omap4";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ cm1_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm1_clockdomains: clockdomains {
+ };
+ };
+
+ cm2: cm2@8000 {
+ compatible = "ti,omap4-cm2";
+ reg = <0x8000 0x3000>;
+
+ cm2_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm2_clockdomains: clockdomains {
+ };
+ };
+
+ omap4_scm_core: scm@2000 {
+ compatible = "ti,omap4-scm-core", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ omap4_padconf_core: scm@100000 {
+ compatible = "ti,omap4-scm-padconf-core",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x100000 0x1000>;
+
+ omap4_pmx_core: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap4_padconf_global: omap4_padconf_global@5a0 {
+ compatible = "syscon";
+ reg = <0x5a0 0x170>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+ };
+
+ l4_wkup: l4@300000 {
+ compatible = "ti,omap4-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300000 0x40000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,omap4-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@a000 {
+ compatible = "ti,omap4-scrm";
+ reg = <0xa000 0x2000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ omap4_pmx_wkup: pinmux@1e040 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x1e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
};
};
@@ -223,8 +265,8 @@
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4a310000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..3cdb5c2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -129,99 +129,141 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,omap5-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-
- prm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prm_clockdomains: clockdomains {
- };
- };
-
- cm_core_aon: cm_core_aon@4a004000 {
- compatible = "ti,omap5-cm-core-aon";
- reg = <0x4a004000 0x2000>;
-
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_aon_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@4ae0a000 {
- compatible = "ti,omap5-scrm";
- reg = <0x4ae0a000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- cm_core: cm_core@4a008000 {
- compatible = "ti,omap5-cm-core";
- reg = <0x4a008000 0x3000>;
-
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
- };
-
- omap5_pmx_core: pinmux@4a002840 {
- compatible = "ti,omap5-padconf", "pinctrl-single";
- reg = <0x4a002840 0x01b6>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,omap5-l4-cfg", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22a000>;
+
+ scm_core: scm@2000 {
+ compatible = "ti,omap5-scm-core", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x800>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ scm_padconf_core: scm@2800 {
+ compatible = "ti,omap5-scm-padconf-core",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2800 0x800>;
+
+ omap5_pmx_core: pinmux@40 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x01b6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap5_padconf_global: omap5_padconf_global@5a0 {
+ compatible = "syscon";
+ reg = <0x5a0 0xec>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+ };
+
+ cm_core_aon: cm_core_aon@4000 {
+ compatible = "ti,omap5-cm-core-aon";
+ reg = <0x4000 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+
+ cm_core: cm_core@8000 {
+ compatible = "ti,omap5-cm-core";
+ reg = <0x8000 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
+ };
};
- omap5_pmx_wkup: pinmux@4ae0c840 {
- compatible = "ti,omap5-padconf", "pinctrl-single";
- reg = <0x4ae0c840 0x0038>;
+
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,omap5-l4-wkup", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x2b000>;
- omap5_padconf_global: tisyscon@4a002da0 {
- compatible = "syscon";
- reg = <0x4A002da0 0xec>;
- };
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x60 0x4>;
- syscon = <&omap5_padconf_global>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ prm: prm@6000 {
+ compatible = "ti,omap5-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@a000 {
+ compatible = "ti,omap5-scrm";
+ reg = <0xa000 0x2000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ omap5_pmx_wkup: pinmux@c840 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0xc840 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
};
@@ -238,8 +280,8 @@
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
@@ -929,8 +971,8 @@
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
- clocks = <&sys_clkin>;
- clock-names = "sysclk";
+ clocks = <&sys_clkin>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 36cafbf..606753e 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -12,6 +12,12 @@
bootargs = "console=ttyLP0,115200";
};
+ clk16m: clk16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -47,6 +53,21 @@
status = "okay";
};
+&dspi1 {
+ status = "okay";
+
+ mcp2515can: can@0 {
+ compatible = "microchip,mcp2515";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ clocks = <&clk16m>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 GPIO_ACTIVE_LOW>;
+ };
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
@@ -94,3 +115,13 @@
&usbh1 {
vbus-supply = <&usbh_vbus_reg>;
};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_can_int: can_int {
+ fsl,pins = <
+ VF610_PAD_PTB21__GPIO_43 0x22ed
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 5c2b732..fbef082 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -23,6 +23,12 @@
status = "okay";
};
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+};
+
&edma0 {
status = "okay";
};
@@ -107,6 +113,15 @@
>;
};
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x33e2
+ VF610_PAD_PTD6__DSPI1_SIN 0x33e1
+ VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
+ VF610_PAD_PTD8__DSPI1_SCK 0x33e2
+ >;
+ };
+
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index 1dbf8d2..e976d2f 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -24,14 +24,13 @@
};
soc {
- interrupt-parent = <&intc>;
-
aips-bus@40000000 {
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ interrupt-parent = <&intc>;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
@@ -40,145 +39,17 @@
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
};
};
-&adc0 {
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&adc1 {
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can0 {
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can1 {
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dspi0 {
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&edma0 {
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
-};
-
-&edma1 {
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
-};
-
-&esdhc1 {
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec0 {
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec1 {
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ftm {
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio3 {
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio4 {
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c0 {
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pit {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&qspi0 {
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sai2 {
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&snvsrtc {
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&src {
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart2 {
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart3 {
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart4 {
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart5 {
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdev0 {
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbh1 {
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy0 {
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy1 {
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+&mscm_ir {
+ interrupt-parent = <&intc>;
};
&wdoga5 {
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index a29c7ce..4aa3351 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -54,6 +54,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
+ interrupt-parent = <&mscm_ir>;
ranges;
aips0: aips-bus@40000000 {
@@ -62,6 +63,19 @@
#size-cells = <1>;
ranges;
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ };
+
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
edma0: dma-controller@40018000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
@@ -69,6 +83,9 @@
<0x40024000 0x1000>,
<0x40025000 0x1000>;
dma-channels = <32>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
@@ -78,6 +95,7 @@
can0: flexcan@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN0>,
<&clks VF610_CLK_FLEXCAN0>;
clock-names = "ipg", "per";
@@ -87,6 +105,7 @@
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
dmas = <&edma0 0 2>,
@@ -98,6 +117,7 @@
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
dmas = <&edma0 0 4>,
@@ -109,6 +129,7 @@
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
dmas = <&edma0 0 6>,
@@ -120,6 +141,7 @@
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
dmas = <&edma0 0 8>,
@@ -133,15 +155,29 @@
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
status = "disabled";
};
+ dspi1: dspi1@4002d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002d000 0x1000>;
+ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI1>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ status = "disabled";
+ };
+
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
dma-names = "tx", "rx";
@@ -153,6 +189,7 @@
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
@@ -186,6 +223,7 @@
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
status = "disabled";
@@ -194,6 +232,7 @@
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
status = "disabled";
@@ -204,6 +243,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
@@ -213,7 +253,6 @@
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
- #gpio-range-cells = <3>;
};
gpio0: gpio@40049000 {
@@ -221,6 +260,7 @@
reg = <0x40049000 0x1000 0x400ff000 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
@@ -231,6 +271,7 @@
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
@@ -241,6 +282,7 @@
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
@@ -251,6 +293,7 @@
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
@@ -261,6 +304,7 @@
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
@@ -274,6 +318,7 @@
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY0>;
fsl,anatop = <&anatop>;
status = "disabled";
@@ -282,6 +327,7 @@
usbphy1: usbphy@40050c00 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050c00 0x400>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
status = "disabled";
@@ -292,6 +338,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
dmas = <&edma0 0 50>,
@@ -311,6 +358,7 @@
usbdev0: usb@40034000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x40034000 0x800>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC0>;
fsl,usbphy = <&usbphy0>;
fsl,usbmisc = <&usbmisc0 0>;
@@ -329,6 +377,7 @@
src: src@4006e000 {
compatible = "fsl,vf610-src", "syscon";
reg = <0x4006e000 0x1000>;
+ interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -345,6 +394,9 @@
<0x400a1000 0x1000>,
<0x400a2000 0x1000>;
dma-channels = <32>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
@@ -360,6 +412,7 @@
snvsrtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
+ interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
};
@@ -368,6 +421,7 @@
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
+ interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
@@ -376,6 +430,7 @@
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
@@ -384,6 +439,7 @@
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
status = "disabled";
@@ -392,6 +448,7 @@
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
@@ -402,6 +459,7 @@
usbh1: usb@400b4000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x400b4000 0x800>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC1>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
@@ -420,6 +478,7 @@
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
clocks = <&clks VF610_CLK_FTM2>,
@@ -432,6 +491,7 @@
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
+ interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
@@ -442,6 +502,7 @@
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
+ interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
@@ -452,6 +513,7 @@
can1: flexcan@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN1>,
<&clks VF610_CLK_FLEXCAN1>;
clock-names = "ipg", "per";
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index e6b0007..af07e05 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -24,9 +24,8 @@
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 9d56781..f69a459 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -13,7 +13,7 @@
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_NETXBIG=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
CONFIG_MACH_IMX27_DT=y
CONFIG_ARCH_U300=y
CONFIG_PCI_MVEBU=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e8a4c95..b7e6b6fb 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -62,6 +62,17 @@
CONFIG_ARCH_STI=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R7S72100=y
+CONFIG_ARCH_R8A73A4=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A7779=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7794=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_MARZEN=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
@@ -84,6 +95,8 @@
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
@@ -130,6 +143,7 @@
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
+CONFIG_SIMPLE_PM_BUS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
@@ -157,6 +171,7 @@
CONFIG_AHCI_TEGRA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
+CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_SUN4I_EMAC=y
@@ -167,14 +182,17 @@
CONFIG_MVNETA=y
CONFIG_KS8851=y
CONFIG_R8169=y
+CONFIG_SH_ETH=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
+CONFIG_MICREL_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
@@ -192,15 +210,18 @@
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
@@ -213,6 +234,9 @@
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
@@ -233,19 +257,26 @@
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_RIIC=y
CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
-CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y
-CONFIG_SPI=y
+CONFIG_I2C_TEGRA=y
CONFIG_I2C_XILINX=y
-CONFIG_SPI_DAVINCI=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
CONFIG_SPI_CADENCE=y
+CONFIG_SPI_DAVINCI=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=m
+CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
@@ -259,12 +290,15 @@
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_SYSCON=y
@@ -276,10 +310,12 @@
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SUN6I=y
+CONFIG_POWER_RESET_RMOBILE=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
+CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DAVINCI_WATCHDOG
CONFIG_ST_THERMAL_SYSCFG=y
@@ -290,6 +326,7 @@
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
+CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
@@ -304,13 +341,16 @@
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
+CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
@@ -324,18 +364,32 @@
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_VSP1=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
+CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SIMPLE=y
+CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=y
@@ -343,6 +397,8 @@
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
@@ -350,6 +406,8 @@
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8978=m
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
@@ -362,6 +420,8 @@
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_USB_CHIPIDEA=y
@@ -374,6 +434,10 @@
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
+CONFIG_USB_RCAR_PHY=m
+CONFIG_USB_RCAR_GEN2_PHY=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
@@ -392,12 +456,14 @@
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_MMC_SUNXI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
@@ -421,10 +487,12 @@
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
+CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_VT8500=y
@@ -436,6 +504,9 @@
CONFIG_DW_DMAC=y
CONFIG_MV_XOR=y
CONFIG_TEGRA20_APB_DMA=y
+CONFIG_SH_DMAE=y
+CONFIG_RCAR_AUDMAC_PP=m
+CONFIG_RCAR_DMAC=y
CONFIG_STE_DMA40=y
CONFIG_SIRF_DMA=y
CONFIG_TI_EDMA=y
@@ -468,6 +539,7 @@
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM=y
+CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b738652..a097cff 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -114,6 +114,7 @@
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
@@ -248,6 +249,7 @@
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_TI_ABB=y
+CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
@@ -374,7 +376,7 @@
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
index 8423be7..5224120 100644
--- a/arch/arm/mach-asm9260/Kconfig
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -2,5 +2,7 @@
bool "Alphascale ASM9260"
depends on ARCH_MULTI_V5
select CPU_ARM926T
+ select ASM9260_TIMER
+ select GENERIC_CLOCKEVENTS
help
Support for Alphascale ASM9260 based platform.
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e8627e0..3a3d3e9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -21,6 +21,7 @@
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
+ depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
@@ -50,6 +51,7 @@
config HAVE_IMX_GPC
bool
+ select PM_GENERIC_DOMAINS if PM
config HAVE_IMX_MMDC
bool
@@ -77,13 +79,6 @@
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
-config SOC_IMX25
- bool
- select ARCH_MXC_IOMUX_V3
- select CPU_ARM926T
- select MXC_AVIC
- select PINCTRL_IMX25
-
config SOC_IMX27
bool
select CPU_ARM926T
@@ -149,62 +144,6 @@
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
- bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX25
-
-config MACH_EUKREA_CPUIMX25SD
- bool "Support Eukrea CPUIMX25 Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX25
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25SD
- default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_IMX25_DT
- bool "Support i.MX25 platforms from device tree"
- select SOC_IMX25
- help
- Include support for Freescale i.MX25 based platforms
- using the device tree for discovery
-
comment "MX27 platforms:"
config MACH_MX27ADS
@@ -557,6 +496,20 @@
endif
+if ARCH_MULTI_V5
+
+comment "Device tree only"
+
+config SOC_IMX25
+ bool "i.MX25 support"
+ select ARCH_MXC_IOMUX_V3
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX25
+ help
+ This enables support for Freescale i.MX25 processor
+endif
+
if ARCH_MULTI_V7
comment "Device tree only"
@@ -631,12 +584,14 @@
config SOC_VF610
bool "Vybrid Family VF610 support"
+ select IRQ_DOMAIN_HIERARCHY
select ARM_GIC
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
+ select SMP_ON_UP if SMP
help
- This enable support for Freescale Vybrid VF610 processor.
+ This enables support for Freescale Vybrid VF610 processor.
choice
prompt "Clocksource for scheduler clock"
@@ -666,7 +621,7 @@
select ZONE_DMA if ARM_LPAE
help
- This enable support for Freescale LS1021A processor.
+ This enables support for Freescale LS1021A processor.
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8d1b101..3244cf1 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,7 +3,7 @@
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
@@ -48,12 +48,6 @@
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-# i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
-obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
-
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 59c0c85..9c2633a 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -30,7 +30,6 @@
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#include "mx25.h"
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
@@ -239,80 +238,6 @@
return 0;
}
-int __init mx25_clocks_init(void)
-{
- void __iomem *ccm;
-
- ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
-
- __mx25_clocks_init(24000000, ccm);
-
- clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- /* i.mx25 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
- /* i.mx25 has the i.mx35 type cspi */
- clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
- clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
- clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
- clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
- clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
- clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
- clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
- clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
- clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
- clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
- clk_register_clkdev(clk[dummy], "audmux", NULL);
- clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
- clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
- /* i.mx25 has the i.mx35 type sdma */
- clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
- clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
- clk_register_clkdev(clk[iim_ipg], "iim", NULL);
-
- mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
-
- return 0;
-}
-
static void __init mx25_clocks_init_dt(struct device_node *np)
{
struct device_node *refnp;
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index d04a430..469a150 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -119,6 +119,7 @@
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
+static unsigned int share_count_mipi_core_cfg;
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
@@ -246,6 +247,7 @@
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+ clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
if (cpu_is_imx6dl()) {
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
@@ -400,7 +402,7 @@
clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
@@ -415,7 +417,9 @@
clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 1028b6c..0f04e30 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -23,13 +23,11 @@
void mx1_map_io(void);
void mx21_map_io(void);
-void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
-void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
@@ -37,13 +35,11 @@
void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
-void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
-void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
@@ -51,7 +47,6 @@
void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
-int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
@@ -71,6 +66,7 @@
void imx_init_revision_from_anatop(void);
struct device *imx_soc_device_init(void);
void imx6_enable_rbc(bool enable);
+void imx_gpc_check_dt(void);
void imx_gpc_set_arm_power_in_lpm(bool power_off);
void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
@@ -106,7 +102,6 @@
static inline void imx_smp_prepare(void) {}
#endif
void imx_src_init(void);
-void imx_gpc_init(void);
void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index 96ec64b..d0ad67e 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -11,6 +11,8 @@
*/
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "iim.h"
#include "hardware.h"
@@ -20,8 +22,15 @@
static int mx25_read_cpu_rev(void)
{
u32 rev;
+ void __iomem *iim_base;
+ struct device_node *np;
- rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+ rev = readl(iim_base + MXC_IIMSREV);
+ iounmap(iim_base);
+
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
deleted file mode 100644
index 61a114c..0000000
--- a/arch/arm/mach-imx/devices-imx25.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx25_fec_data;
-#define imx25_add_fec(pdata) \
- imx_add_fec(&imx25_fec_data, pdata)
-
-extern const struct imx_flexcan_data imx25_flexcan_data[];
-#define imx25_add_flexcan(id) \
- imx_add_flexcan(&imx25_flexcan_data[id])
-#define imx25_add_flexcan0() imx25_add_flexcan(0)
-#define imx25_add_flexcan1() imx25_add_flexcan(1)
-
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
-#define imx25_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc() \
- imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx25_imx_fb_data;
-#define imx25_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
-#define imx25_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
-#define imx25_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
-#define imx25_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
-#define imx25_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
-#define imx25_add_mx2_camera(pdata) \
- imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
-#define imx25_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
-#define imx25_add_mxc_ehci_hs(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
-#define imx25_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
-#define imx25_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx25_cspi_data[];
-#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_cspi_data[id], pdata)
-#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 1d2cc18..3a55298 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -21,9 +21,6 @@
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
-config IMX_HAVE_PLATFORM_IMXDI_RTC
- bool
-
config IMX_HAVE_PLATFORM_IMX_FB
bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 8fdb12b..e5cf587 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index d86f925..b403a4f 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -19,11 +19,6 @@
.irq = soc ## _INT_FEC, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fec_data imx25_fec_data __initconst =
- imx_fec_data_entry_single(MX25, "imx25-fec");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 23b0061..25e1de6 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -18,11 +18,6 @@
.irq = soc ## _INT_USB_OTG, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 25a47c6..7df6328 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -29,11 +29,6 @@
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 644ac26..ae97915 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -31,16 +31,6 @@
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
-#define imx25_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
- imx25_imx_i2c_data_entry(0, 1),
- imx25_imx_i2c_data_entry(1, 2),
- imx25_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
index f42200b..479e4d7 100644
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -21,11 +21,6 @@
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX25, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
index 1c7c721..6f0e94e 100644
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -30,15 +30,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
-#define imx25_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
- imx25_imx_ssi_data_entry(0, 1),
- imx25_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 8c01836..6962cff 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -47,18 +47,6 @@
};
#endif
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
-#define imx25_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
- imx25_imx_uart_data_entry(0, 1),
- imx25_imx_uart_data_entry(1, 2),
- imx25_imx_uart_data_entry(2, 3),
- imx25_imx_uart_data_entry(3, 4),
- imx25_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
index 54f63bc..8c134c8 100644
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -25,11 +25,6 @@
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
deleted file mode 100644
index 5bb490d..0000000
--- a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imxdi_rtc_data_entry_single(soc) \
- { \
- .iobase = soc ## _DRYICE_BASE_ADDR, \
- .irq = soc ## _INT_DRYICE, \
- }
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
- imx_imxdi_rtc_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-struct platform_device *__init imx_add_imxdi_rtc(
- const struct imx_imxdi_rtc_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imxdi_rtc", 0,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c
index b53e1f3..4c377c3 100644
--- a/arch/arm/mach-imx/devices/platform-mx2-camera.c
+++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c
@@ -27,11 +27,6 @@
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
index 2963536..4537abd 100644
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
@@ -18,13 +18,6 @@
.irq = soc ## _INT_USB_ ## hs, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
-const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
- imx_mxc_ehci_data_entry_single(MX25, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
index fa618a3..676df49 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c
@@ -34,11 +34,6 @@
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index aca825d..5e9707b 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -39,17 +39,6 @@
};
#endif
-#ifdef CONFIG_SOC_IMX25
-/* i.mx25 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
-#define imx25_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
- imx25_cspi_data_entry(0, 1),
- imx25_cspi_data_entry(1, 2),
- imx25_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
deleted file mode 100644
index 42a5a3d..0000000
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX25_OTG_SIC_SHIFT 29
-#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
-#define MX25_OTG_PM_BIT (1 << 24)
-#define MX25_OTG_PP_BIT (1 << 11)
-#define MX25_OTG_OCPOL_BIT (1 << 3)
-
-#define MX25_H1_SIC_SHIFT 21
-#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
-#define MX25_H1_PP_BIT (1 << 18)
-#define MX25_H1_PM_BIT (1 << 16)
-#define MX25_H1_IPPUE_UP_BIT (1 << 7)
-#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
-#define MX25_H1_TLL_BIT (1 << 5)
-#define MX25_H1_USBTE_BIT (1 << 4)
-#define MX25_H1_OCPOL_BIT (1 << 2)
-
-int mx25_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
- MX25_OTG_OCPOL_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX25_OTG_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX25_OTG_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX25_OTG_OCPOL_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
- MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
- MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX25_H1_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX25_H1_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX25_H1_OCPOL_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX25_H1_TLL_BIT;
-
- if (flags & MXC_EHCI_INTERNAL_PHY)
- v |= MX25_H1_USBTE_BIT;
-
- if (flags & MXC_EHCI_IPPUE_DOWN)
- v |= MX25_H1_IPPUE_DOWN_BIT;
-
- if (flags & MXC_EHCI_IPPUE_UP)
- v |= MX25_H1_IPPUE_UP_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
-
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
deleted file mode 100644
index e77cc3af..0000000
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
- /* LCD_PWR */
- MX25_PAD_PWM__GPIO_1_26,
- /* LED */
- MX25_PAD_POWER_FAIL__GPIO_3_19,
- /* SWITCH */
- MX25_PAD_VSTBY_ACK__GPIO_3_18,
- /* UART2 */
- MX25_PAD_UART2_RTS__UART2_RTS,
- MX25_PAD_UART2_CTS__UART2_CTS,
- MX25_PAD_UART2_TXD__UART2_TXD,
- MX25_PAD_UART2_RXD__UART2_RXD,
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- MX25_PAD_DE_B__GPIO_2_20,
- /* I2S */
- MX25_PAD_KPP_COL3__AUD5_TXFS,
- MX25_PAD_KPP_COL2__AUD5_TXC,
- MX25_PAD_KPP_COL1__AUD5_RXD,
- MX25_PAD_KPP_COL0__AUD5_TXD,
- /* CAN */
- MX25_PAD_GPIO_D__CAN2_RX,
- MX25_PAD_GPIO_C__CAN2_TX,
- /* SPI1 */
- MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
- MX25_PAD_CSPI1_MISO__CSPI1_MISO,
- MX25_PAD_CSPI1_SS0__GPIO_1_16,
- MX25_PAD_CSPI1_SS1__GPIO_1_17,
- MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
- MX25_PAD_CSPI1_RDY__GPIO_2_22,
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 19)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18)
-#define GPIO_SD1CD IMX_GPIO_NR(2, 20)
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 26)
-#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16)
-#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17)
-#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22)
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
- {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .left_margin = 30,
- .right_margin = 38,
- .upper_margin = 20,
- .lower_margin = 3,
- .hsync_len = 15,
- .vsync_len = 4,
- },
- .bpp = 16,
- .pcr = 0xCAD08B80,
- }, {
- .mode = {
- .name = "DVI-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 32000,
- .hsync_len = 7,
- .left_margin = 100,
- .right_margin = 100,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 100,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- }, {
- .mode = {
- .name = "DVI-SVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 600,
- .pixclock = 25000,
- .hsync_len = 7,
- .left_margin = 75,
- .right_margin = 75,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 75,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
- .mode = eukrea_mximxsd_modes,
- .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDPWR, 1);
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
- .set_power = eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
-};
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd_led_info __initconst = {
- .leds = eukrea_mbimxsd_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd_button_data __initconst = {
- .buttons = eukrea_mbimxsd_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_gpio = GPIO_SD1CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- },
-};
-
-static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
- .chipselect = eukrea_mbimxsd25_spi_cs,
- .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx25_add_imx_uart1(&uart_pdata);
- imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
- imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
- imx25_add_flexcan1();
- imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDPWR, "LCDPWR");
- gpio_direction_output(GPIO_LCDPWR, 1);
-
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
- gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
- gpio_direction_input(GPIO_SPI1_IRQ);
- gpio_free(GPIO_SPI1_IRQ);
- imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
- spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
- ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 14d6c82..6edc940 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -100,7 +100,7 @@
.num_modes = ARRAY_SIZE(fb_modedb),
};
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 745caa1..4d60005 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,15 +10,25 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
+#include "hardware.h"
+#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
+#define GPC_PGC_GPU_PDN 0x260
+#define GPC_PGC_GPU_PUPSCR 0x264
+#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
@@ -26,6 +36,19 @@
#define GPC_PGC_SW_SHIFT 0x0
#define IMR_NUM 4
+#define GPC_MAX_IRQS (IMR_NUM * 32)
+
+#define GPU_VPU_PUP_REQ BIT(1)
+#define GPU_VPU_PDN_REQ BIT(0)
+
+#define GPC_CLK_MAX 6
+
+struct pu_domain {
+ struct generic_pm_domain base;
+ struct regulator *reg;
+ struct clk *clk[GPC_CLK_MAX];
+ int num_clks;
+};
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
@@ -77,17 +100,17 @@
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
- unsigned int idx = d->hwirq / 32 - 1;
+ unsigned int idx = d->hwirq / 32;
u32 mask;
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return -EINVAL;
-
mask = 1 << d->hwirq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
+ /*
+ * Do *not* call into the parent, as the GIC doesn't have any
+ * wake-up facility...
+ */
return 0;
}
@@ -117,7 +140,7 @@
void __iomem *reg;
u32 val;
- reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+ reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
val = readl_relaxed(reg);
val &= ~(1 << hwirq % 32);
writel_relaxed(val, reg);
@@ -128,7 +151,7 @@
void __iomem *reg;
u32 val;
- reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+ reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
val = readl_relaxed(reg);
val |= 1 << (hwirq % 32);
writel_relaxed(val, reg);
@@ -136,37 +159,319 @@
static void imx_gpc_irq_unmask(struct irq_data *d)
{
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return;
-
imx_gpc_hwirq_unmask(d->hwirq);
+ irq_chip_unmask_parent(d);
}
static void imx_gpc_irq_mask(struct irq_data *d)
{
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return;
-
imx_gpc_hwirq_mask(d->hwirq);
+ irq_chip_mask_parent(d);
}
-void __init imx_gpc_init(void)
+static struct irq_chip imx_gpc_chip = {
+ .name = "GPC",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = imx_gpc_irq_mask,
+ .irq_unmask = imx_gpc_irq_unmask,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_wake = imx_gpc_irq_set_wake,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpc_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
{
- struct device_node *np;
+ if (domain->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int imx_gpc_domain_alloc(struct irq_domain *domain,
+ unsigned int irq,
+ unsigned int nr_irqs, void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
int i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
- gpc_base = of_iomap(np, 0);
- WARN_ON(!gpc_base);
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if (hwirq >= GPC_MAX_IRQS)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+ &imx_gpc_chip, NULL);
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops imx_gpc_domain_ops = {
+ .xlate = imx_gpc_domain_xlate,
+ .alloc = imx_gpc_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init imx_gpc_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *parent_domain, *domain;
+ int i;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ gpc_base = of_iomap(node, 0);
+ if (WARN_ON(!gpc_base))
+ return -ENOMEM;
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+ node, &imx_gpc_domain_ops,
+ NULL);
+ if (!domain) {
+ iounmap(gpc_base);
+ return -ENOMEM;
+ }
/* Initially mask all interrupts */
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
- /* Register GPC as the secondary interrupt controller behind GIC */
- gic_arch_extn.irq_mask = imx_gpc_irq_mask;
- gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
- gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+ return 0;
}
+
+/*
+ * We cannot use the IRQCHIP_DECLARE macro that lives in
+ * drivers/irqchip, so we're forced to roll our own. Not very nice.
+ */
+OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+
+void __init imx_gpc_check_dt(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+ if (WARN_ON(!np ||
+ !of_find_property(np, "interrupt-controller", NULL)))
+ pr_warn("Outdated DT detected, system is about to crash!!!\n");
+}
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+
+static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ int iso, iso2sw;
+ u32 val;
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
+ iso = val & 0x3f;
+ iso2sw = (val >> 8) & 0x3f;
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Request GPC to power down GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PDN_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((iso + iso2sw) * 1000 / 66);
+}
+
+static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+
+ _imx6q_pm_pu_power_off(genpd);
+
+ if (pu->reg)
+ regulator_disable(pu->reg);
+
+ return 0;
+}
+
+static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+ int i, ret, sw, sw2iso;
+ u32 val;
+
+ if (pu->reg)
+ ret = regulator_enable(pu->reg);
+ if (pu->reg && ret) {
+ pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Enable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_prepare_enable(pu->clk[i]);
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
+ sw = val & 0x3f;
+ sw2iso = (val >> 8) & 0x3f;
+
+ /* Request GPC to power up GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PUP_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((sw + sw2iso) * 1000 / 66);
+
+ /* Disable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_disable_unprepare(pu->clk[i]);
+
+ return 0;
+}
+
+static struct generic_pm_domain imx6q_arm_domain = {
+ .name = "ARM",
+};
+
+static struct pu_domain imx6q_pu_domain = {
+ .base = {
+ .name = "PU",
+ .power_off = imx6q_pm_pu_power_off,
+ .power_on = imx6q_pm_pu_power_on,
+ .power_off_latency_ns = 25000,
+ .power_on_latency_ns = 2000000,
+ },
+};
+
+static struct generic_pm_domain imx6sl_display_domain = {
+ .name = "DISPLAY",
+};
+
+static struct generic_pm_domain *imx_gpc_domains[] = {
+ &imx6q_arm_domain,
+ &imx6q_pu_domain.base,
+ &imx6sl_display_domain,
+};
+
+static struct genpd_onecell_data imx_gpc_onecell_data = {
+ .domains = imx_gpc_domains,
+ .num_domains = ARRAY_SIZE(imx_gpc_domains),
+};
+
+static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
+{
+ struct clk *clk;
+ bool is_off;
+ int i;
+
+ imx6q_pu_domain.reg = pu_reg;
+
+ for (i = 0; ; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+ if (i >= GPC_CLK_MAX) {
+ dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
+ goto clk_err;
+ }
+ imx6q_pu_domain.clk[i] = clk;
+ }
+ imx6q_pu_domain.num_clks = i;
+
+ is_off = IS_ENABLED(CONFIG_PM);
+ if (is_off) {
+ _imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
+ } else {
+ /*
+ * Enable power if compiled without CONFIG_PM in case the
+ * bootloader disabled it.
+ */
+ imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+ }
+
+ pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+ return of_genpd_add_provider_onecell(dev->of_node,
+ &imx_gpc_onecell_data);
+
+clk_err:
+ while (i--)
+ clk_put(imx6q_pu_domain.clk[i]);
+ return -EINVAL;
+}
+
+#else
+static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
+{
+ return 0;
+}
+#endif /* CONFIG_PM_GENERIC_DOMAINS */
+
+static int imx_gpc_probe(struct platform_device *pdev)
+{
+ struct regulator *pu_reg;
+ int ret;
+
+ pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
+ if (PTR_ERR(pu_reg) == -ENODEV)
+ pu_reg = NULL;
+ if (IS_ERR(pu_reg)) {
+ ret = PTR_ERR(pu_reg);
+ dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
+ return ret;
+ }
+
+ return imx_gpc_genpd_init(&pdev->dev, pu_reg);
+}
+
+static const struct of_device_id imx_gpc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-gpc" },
+ { .compatible = "fsl,imx6sl-gpc" },
+ { }
+};
+
+static struct platform_driver imx_gpc_driver = {
+ .driver = {
+ .name = "imx-gpc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_gpc_dt_ids,
+ },
+ .probe = imx_gpc_probe,
+};
+
+static int __init imx_pgc_init(void)
+{
+ return platform_driver_register(&imx_gpc_driver);
+}
+subsys_initcall(imx_pgc_init);
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 66b2b56..76af2c0 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -112,7 +112,6 @@
#include "mx21.h"
#include "mx27.h"
#include "mx1.h"
-#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
diff --git a/arch/arm/mach-imx/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h
deleted file mode 100644
index be51e83..0000000
--- a/arch/arm/mach-imx/iomux-mx25.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * arch/arm/plat-mxc/include/mach/iomux-mx25.h
- *
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * based on arch/arm/mach-mx25/mx25_pins.h
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and
- * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX25_H__
-#define __MACH_IOMUX_MX25_H__
-
-#include "iomux-v3.h"
-
-/*
- * IOMUX/PAD Bit field definitions
- */
-
-#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
index 0a5adba..2e4a0dd 100644
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ b/arch/arm/mach-imx/iomux-mx3.h
@@ -114,7 +114,7 @@
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
/*
- * setups mutliple pins
+ * setups multiple pins
* convenient way to call the above function with tables
*/
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index d61f960..a53b2e6 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -56,9 +56,10 @@
return 0;
}
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count)
{
- iomux_v3_cfg_t *p = pad_list;
+ const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h
index 2fa3b54..f79e165 100644
--- a/arch/arm/mach-imx/iomux-v3.h
+++ b/arch/arm/mach-imx/iomux-v3.h
@@ -128,10 +128,11 @@
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
- * setups mutliple pads
+ * setups multiple pads
* convenient way to call the above function with tables
*/
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count);
/*
* Initialise the iomux controller
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 62a6e02..922ffd6 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -75,7 +75,7 @@
},
};
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
deleted file mode 100644
index b2ee6e0..0000000
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
- /* FEC - RMII */
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- /* I2C1 */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
- .init = eukrea_cpuimx25_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .init = eukrea_cpuimx25_usbh2_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
- imx25_soc_init();
-
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
- ARRAY_SIZE(eukrea_cpuimx25_pads)))
- printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- imx25_add_imxdi_rtc();
- imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx2_wdt();
-
- i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
- imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
- if (otg_mode_host)
- imx25_add_mxc_ehci_otg(&otg_pdata);
- else
- imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
- eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
- /* Maintainer: Eukrea Electromatique */
- .atag_offset = 0x100,
- .map_io = mx25_map_io,
- .init_early = imx25_init_early,
- .init_irq = mx25_init_irq,
- .init_time = eukrea_cpuimx25_timer_init,
- .init_machine = eukrea_cpuimx25_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/mach-imx25.c
similarity index 67%
rename from arch/arm/mach-imx/imx25-dt.c
rename to arch/arm/mach-imx/mach-imx25.c
index 25defbd..9379fd0 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -10,12 +10,29 @@
*/
#include <linux/irq.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
-#include "mx25.h"
+#include "hardware.h"
+
+static void __init imx25_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX25);
+}
+
+static void __init mx25_init_irq(void)
+{
+ struct device_node *np;
+ void __iomem *avic_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
+ mxc_init_irq(avic_base);
+}
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
@@ -23,7 +40,6 @@
};
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
- .map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4ad6e47..e21a693 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -387,10 +387,10 @@
static void __init imx6q_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 24bfaaf..12a1b09 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -61,10 +61,10 @@
static void __init imx6sl_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 66988eb..f17b700 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -81,10 +81,10 @@
static void __init imx6sx_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
deleted file mode 100644
index 0d01e36..0000000
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- * - i.MX25 3-Stack Development System
- * - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t mx25pdk_pads[] = {
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
- MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
-
- /* Keypad */
- MX25_PAD_KPP_ROW0__KPP_ROW0,
- MX25_PAD_KPP_ROW1__KPP_ROW1,
- MX25_PAD_KPP_ROW2__KPP_ROW2,
- MX25_PAD_KPP_ROW3__KPP_ROW3,
- MX25_PAD_KPP_COL0__KPP_COL0,
- MX25_PAD_KPP_COL1__KPP_COL1,
- MX25_PAD_KPP_COL2__KPP_COL2,
- MX25_PAD_KPP_COL3__KPP_COL3,
-
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
- MX25_PAD_A15__GPIO_2_1, /* CardDetect */
-
- /* I2C1 */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-
- /* CAN1 */
- MX25_PAD_GPIO_A__CAN1_TX,
- MX25_PAD_GPIO_B__CAN1_RX,
- MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3)
-#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8)
-
-static void __init mx25pdk_fec_reset(void)
-{
- gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
- gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
- gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
- gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
- udelay(2);
-
- /* turn on PHY power and lift reset */
- gpio_set_value(FEC_ENABLE_GPIO, 1);
- gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
- {
- .mode = {
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39683,
- .left_margin = 45,
- .right_margin = 114,
- .upper_margin = 33,
- .lower_margin = 11,
- .hsync_len = 1,
- .vsync_len = 1,
- },
- .bpp = 16,
- .pcr = 0xFA208B80,
- },
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
- .mode = mx25pdk_modes,
- .num_modes = ARRAY_SIZE(mx25pdk_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(0, 2, KEY_VOLUMEDOWN),
- KEY(0, 3, KEY_HOME),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(1, 3, KEY_VOLUMEUP),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
- KEY(3, 0, KEY_F1),
- KEY(3, 1, KEY_F2),
- KEY(3, 2, KEY_F3),
- KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
- .keymap = mx25pdk_keymap,
- .keymap_size = ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static int mx25pdk_usbh2_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .init = mx25pdk_usbh2_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-#define SD1_GPIO_WP IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_CD IMX_GPIO_NR(2, 1)
-
-static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
- .wp_gpio = SD1_GPIO_WP,
- .cd_gpio = SD1_GPIO_CD,
- .wp_type = ESDHC_WP_GPIO,
- .cd_type = ESDHC_CD_GPIO,
-};
-
-static void __init mx25pdk_init(void)
-{
- imx25_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
- ARRAY_SIZE(mx25pdk_pads));
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_fsl_usb2_udc(&otg_device_pdata);
- imx25_add_mxc_ehci_hs(&usbh2_pdata);
- imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- imx25_add_imxdi_rtc();
- imx25_add_imx_fb(&mx25pdk_fb_pdata);
- imx25_add_imx2_wdt();
-
- mx25pdk_fec_reset();
- imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
- imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
- imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
-
- gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
- imx25_add_flexcan0();
-}
-
-static void __init mx25pdk_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx25_map_io,
- .init_early = imx25_init_early,
- .init_irq = mx25_init_irq,
- .init_time = mx25pdk_timer_init,
- .init_machine = mx25pdk_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 72cd77d..7e315f0 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -166,7 +166,7 @@
&mx35pdk_flash,
};
-static iomux_v3_cfg_t mx35pdk_pads[] = {
+static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index b623bca..e447e59 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -129,7 +129,7 @@
&pcm043_flash,
};
-static iomux_v3_cfg_t pcm043_pads[] = {
+static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 97836e9..27a8f7e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -161,7 +161,7 @@
}
};
-static iomux_v3_cfg_t vpr200_pads[] = {
+static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
deleted file mode 100644
index 5211f62..0000000
--- a/arch/arm/mach-imx/mm-imx25.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-#include "mx25.h"
-
-/*
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX25 boards.
- */
-static struct map_desc mx25_io_desc[] __initdata = {
- imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx25_map_io(void)
-{
- iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
-}
-
-void __init imx25_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX25);
- mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-}
-
-void __init mx25_init_irq(void)
-{
- mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-}
-
-static struct sdma_platform_data imx25_sdma_pdata __initdata = {
- .fw_name = "sdma-imx25.bin",
-};
-
-static const struct resource imx25_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx25_soc_init(void)
-{
- mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx25 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
- mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
- mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
- mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
-
- pinctrl_provide_dummies();
- /* i.mx25 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
- /* i.mx25 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
- ARRAY_SIZE(imx25_audmux_res));
-}
diff --git a/arch/arm/mach-imx/mx25.h b/arch/arm/mach-imx/mx25.h
deleted file mode 100644
index ec46640..0000000
--- a/arch/arm/mach-imx/mx25.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef __MACH_MX25_H__
-#define __MACH_MX25_H__
-
-#define MX25_AIPS1_BASE_ADDR 0x43f00000
-#define MX25_AIPS1_SIZE SZ_1M
-#define MX25_AIPS2_BASE_ADDR 0x53f00000
-#define MX25_AIPS2_SIZE SZ_1M
-#define MX25_AVIC_BASE_ADDR 0x68000000
-#define MX25_AVIC_SIZE SZ_1M
-
-#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
-#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
-#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000)
-#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000)
-#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
-#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
-#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
-
-#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
-#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
-#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
-#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
-#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
-#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
-#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
-#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
-#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
-#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
-
-#define MX25_UART1_BASE_ADDR 0x43f90000
-#define MX25_UART2_BASE_ADDR 0x43f94000
-#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
-#define MX25_UART3_BASE_ADDR 0x5000c000
-#define MX25_UART4_BASE_ADDR 0x50008000
-#define MX25_UART5_BASE_ADDR 0x5002c000
-
-#define MX25_CSPI3_BASE_ADDR 0x50004000
-#define MX25_CSPI2_BASE_ADDR 0x50010000
-#define MX25_FEC_BASE_ADDR 0x50038000
-#define MX25_SSI2_BASE_ADDR 0x50014000
-#define MX25_SSI1_BASE_ADDR 0x50034000
-#define MX25_NFC_BASE_ADDR 0xbb000000
-#define MX25_IIM_BASE_ADDR 0x53ff0000
-#define MX25_DRYICE_BASE_ADDR 0x53ffc000
-#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
-#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
-#define MX25_LCDC_BASE_ADDR 0x53fbc000
-#define MX25_KPP_BASE_ADDR 0x43fa8000
-#define MX25_SDMA_BASE_ADDR 0x53fd4000
-#define MX25_USB_BASE_ADDR 0x53ff4000
-#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
-/*
- * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
- * for the host controller. Early documentation drafts specified 0x400 and
- * Freescale internal sources confirm only the latter value to work.
- */
-#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
-#define MX25_CSI_BASE_ADDR 0x53ff8000
-
-#define MX25_IO_P2V(x) IMX_IO_P2V(x)
-#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
-#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
-#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
-#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
-#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
-#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
-#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
-#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
-#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
-#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
-#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
-#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
-#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
-#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
-#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
-#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
-#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
-#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
-#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
-#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
-#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
-#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54)
-#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
-
-#define MX25_DMA_REQ_SSI2_RX1 22
-#define MX25_DMA_REQ_SSI2_TX1 23
-#define MX25_DMA_REQ_SSI2_RX0 24
-#define MX25_DMA_REQ_SSI2_TX0 25
-#define MX25_DMA_REQ_SSI1_RX1 26
-#define MX25_DMA_REQ_SSI1_TX1 27
-#define MX25_DMA_REQ_SSI1_RX0 28
-#define MX25_DMA_REQ_SSI1_TX0 29
-
-#ifndef __ASSEMBLY__
-extern int mx25_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 46fd695..6a7c6fc 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -310,10 +310,12 @@
* Low-Power mode.
* 3) Software should mask IRQ #32 right after CCM Low-Power mode
* is set (set bits 0-1 of CCM_CLPCR).
+ *
+ * Note that IRQ #32 is GIC SPI #0.
*/
- imx_gpc_hwirq_unmask(32);
+ imx_gpc_hwirq_unmask(0);
writel_relaxed(val, ccm_base + CLPCR);
- imx_gpc_hwirq_mask(32);
+ imx_gpc_hwirq_mask(0);
return 0;
}
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 34b4c00..dd94567 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,13 +71,7 @@
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-#ifndef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 0;
-
-#else
-
-static unsigned short enable_dyn_sleep = 1;
+static unsigned short enable_dyn_sleep;
static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
@@ -90,8 +84,9 @@
{
unsigned short value;
if (sscanf(buf, "%hu", &value) != 1 ||
- (value != 0 && value != 1)) {
- printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+ (value != 0 && value != 1) ||
+ (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+ pr_err("idle_sleep_store: Invalid value\n");
return -EINVAL;
}
enable_dyn_sleep = value;
@@ -101,7 +96,6 @@
static struct kobj_attribute sleep_while_idle_attr =
__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
-#endif
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
@@ -115,16 +109,11 @@
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
- int do_sleep = 0;
local_fiq_disable();
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
- if (enable_dyn_sleep)
- do_sleep = 1;
#endif
#ifdef CONFIG_OMAP_DM_TIMER
@@ -134,10 +123,12 @@
if (omap_dma_running())
use_idlect1 &= ~(1 << 6);
- /* We should be able to remove the do_sleep variable and multiple
+ /*
+ * We should be able to remove the do_sleep variable and multiple
* tests above as soon as drivers, timer and DMA code have been fixed.
- * Even the sleep block count should become obsolete. */
- if ((use_idlect1 != ~0) || !do_sleep) {
+ * Even the sleep block count should become obsolete.
+ */
+ if ((use_idlect1 != ~0) || !enable_dyn_sleep) {
__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
if (cpu_is_omap15xx())
@@ -635,15 +626,25 @@
static int __init omap_pm_init(void)
{
-
-#ifdef CONFIG_OMAP_32K_TIMER
- int error;
-#endif
+ int error = 0;
if (!cpu_class_is_omap1())
return -ENODEV;
- printk("Power Management for TI OMAP.\n");
+ pr_info("Power Management for TI OMAP.\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+ if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+ IS_ENABLED(CONFIG_OMAP_DM_TIMER)) {
+ /* OMAP16xx only */
+ pr_info("OMAP1 PM: sleep states in idle enabled\n");
+ enable_dyn_sleep = 1;
+ }
/*
* We copy the assembler sleep/wakeup routines to SRAM.
@@ -693,17 +694,15 @@
omap_pm_init_debugfs();
#endif
-#ifdef CONFIG_OMAP_32K_TIMER
error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
if (error)
printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
omap_cfg_reg(T20_1610_LOW_PWR);
}
- return 0;
+ return error;
}
__initcall(omap_pm_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 02f5f3f..f92f389 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -69,6 +69,7 @@
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
+ select ARM_ERRATA_798181 if SMP
config ARCH_OMAP2PLUS
bool
@@ -279,27 +280,6 @@
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
-config OMAP4_ERRATA_I688
- bool "OMAP4 errata: Async Bridge Corruption"
- depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
- select ARCH_HAS_BARRIERS
- help
- If a data is stalled inside asynchronous bridge because of back
- pressure, it may be accepted multiple times, creating pointer
- misalignment that will corrupt next transfers on that data path
- until next reset of the system (No recovery procedure once the
- issue is hit, the path remains consistently broken). Async bridge
- can be found on path between MPU to EMIF and MPU to L3 interconnect.
- This situation can happen only when the idle is initiated by a
- Master Request Disconnection (which is trigged by software when
- executing WFI on CPU).
- The work-around for this errata needs all the initiators connected
- through async bridge must ensure that data path is properly drained
- before issuing WFI. This condition will be met if one Strongly ordered
- access is performed to the target right before executing the WFI.
- In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
- IO barrier ensure that there is no synchronisation loss on initiators
- operating on both interconnect port simultaneously.
endmenu
endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6124db5..a699d71 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,6 +23,9 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/of_address.h>
+#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
@@ -72,30 +75,110 @@
static bool clkdm_control = true;
static LIST_HEAD(clk_hw_omap_clocks);
-void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
{
- if (clk->flags & MEMMAP_ADDRESSING) {
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- writel_relaxed(val, clk_memmaps[r->index] + r->offset);
- } else {
+ if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
writel_relaxed(val, reg);
- }
+ else
+ clk_memmap_writel(val, reg);
}
u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
{
- u32 val;
+ if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
+ return readl_relaxed(reg);
+ else
+ return clk_memmap_readl(reg);
+}
- if (clk->flags & MEMMAP_ADDRESSING) {
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- val = readl_relaxed(clk_memmaps[r->index] + r->offset);
- } else {
- val = readl_relaxed(reg);
- }
+static struct ti_clk_ll_ops omap_clk_ll_ops = {
+ .clk_readl = clk_memmap_readl,
+ .clk_writel = clk_memmap_writel,
+};
- return val;
+/**
+ * omap2_clk_provider_init - initialize a clock provider
+ * @match_table: DT device table to match for devices to init
+ * @np: device node pointer for the this clock provider
+ * @index: index for the clock provider
+ + @syscon: syscon regmap pointer
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
+ *
+ * Initializes a clock provider module (CM/PRM etc.), registering
+ * the memory mapping at specified index and initializing the
+ * low level driver infrastructure. Returns 0 in success.
+ */
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+ struct regmap *syscon, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ ti_clk_ll_ops = &omap_clk_ll_ops;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ ti_dt_clk_init_provider(np, index);
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ ti_clk_ll_ops = &omap_clk_ll_ops;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a56742f..652ed0a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -271,10 +271,14 @@
extern const struct clksel_rate div_1_4_rates[];
extern const struct clksel_rate div31_1to31_rates[];
-extern void __iomem *clk_memmaps[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+struct regmap;
+
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+ struct regmap *syscon, void __iomem *mem);
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 6222e87..1fe3e6b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -70,6 +70,8 @@
int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
extern int cm_register(struct cm_ll_data *cld);
extern int cm_unregister(struct cm_ll_data *cld);
+int omap_cm_init(void);
+int omap2_cm_base_init(void);
# endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index ef62ac9..3e5fd35 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -393,7 +393,7 @@
.wait_module_ready = &omap2xxx_cm_wait_module_ready,
};
-int __init omap2xxx_cm_init(void)
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
{
return cm_register(&omap2xxx_cm_ll_data);
}
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 83b6c59..7b8c79c 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -63,7 +63,7 @@
extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
u32 mdm);
-extern int __init omap2xxx_cm_init(void);
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index cc5aac7..7b181f9 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -352,7 +352,7 @@
.module_disable = &am33xx_cm_module_disable,
};
-int __init am33xx_cm_init(void)
+int __init am33xx_cm_init(const struct omap_prcm_init_data *data)
{
return cm_register(&am33xx_cm_ll_data);
}
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 046b4b2..a91f7d2 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -19,6 +19,7 @@
#include "cm.h"
#include "cm-regbits-33xx.h"
+#include "prcm-common.h"
/* CM base address */
#define AM33XX_CM_BASE 0x44e00000
@@ -374,6 +375,6 @@
#ifndef __ASSEMBLER__
-int am33xx_cm_init(void);
+int am33xx_cm_init(const struct omap_prcm_init_data *data);
#endif /* ASSEMBLER */
#endif
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index ebead8f..187fa43 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -671,8 +671,9 @@
.wait_module_ready = &omap3xxx_cm_wait_module_ready,
};
-int __init omap3xxx_cm_init(void)
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data)
{
+ omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
return cm_register(&omap3xxx_cm_ll_data);
}
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index 734a858..bc444e2 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -72,7 +72,7 @@
extern void omap3_cm_restore_context(void);
extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
-extern int __init omap3xxx_cm_init(void);
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data);
#endif
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 728d06a..309a4c9 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,7 +23,6 @@
#define OMAP4_CM_CLKSTCTRL 0x0000
#define OMAP4_CM_STATICDEP 0x0004
-void omap_cm_base_init(void);
-int omap4_cm_init(void);
+int omap4_cm_init(const struct omap_prcm_init_data *data);
#endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 8fe02fce..23e8bce 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -15,10 +15,14 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/bug.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "cm2xxx.h"
#include "cm3xxx.h"
+#include "cm33xx.h"
#include "cm44xx.h"
+#include "clock.h"
/*
* cm_ll_data: function pointers to SoC-specific implementations of
@@ -33,6 +37,9 @@
/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
void __iomem *cm2_base;
+#define CM_NO_CLOCKS 0x1
+#define CM_SINGLE_INSTANCE 0x2
+
/**
* omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
* @cm: CM base virtual address
@@ -212,3 +219,152 @@
return 0;
}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
+static struct omap_prcm_init_data cm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap4_cm_init,
+};
+
+static struct omap_prcm_init_data cm2_data __initdata = {
+ .index = TI_CLKM_CM2,
+ .init = omap4_cm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct omap_prcm_init_data omap2_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap2xxx_cm_init,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap_prcm_init_data omap3_cm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap3xxx_cm_init,
+ .flags = CM_SINGLE_INSTANCE,
+
+ /*
+ * IVA2 offset is a negative value, must offset the cm_base address
+ * by this to get it to positive side on the iomap
+ */
+ .offset = -OMAP3430_IVA2_MOD,
+};
+#endif
+
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
+static struct omap_prcm_init_data am3_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+ .init = am33xx_cm_init,
+};
+#endif
+
+#ifdef CONFIG_SOC_AM43XX
+static struct omap_prcm_init_data am4_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+ .init = omap4_cm_init,
+};
+#endif
+
+static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
+#ifdef CONFIG_ARCH_OMAP2
+ { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ { .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ { .compatible = "ti,omap4-cm1", .data = &cm_data },
+ { .compatible = "ti,omap4-cm2", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+ { .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+ { .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ { .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+ { .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_AM33XX
+ { .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ { .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
+ { .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
+#endif
+ { }
+};
+
+/**
+ * omap2_cm_base_init - initialize iomappings for the CM drivers
+ *
+ * Detects and initializes the iomappings for the CM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_cm_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct omap_prcm_init_data *data;
+ void __iomem *mem;
+
+ for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+ data = (struct omap_prcm_init_data *)match->data;
+
+ mem = of_iomap(np, 0);
+ if (!mem)
+ return -ENOMEM;
+
+ if (data->index == TI_CLKM_CM)
+ cm_base = mem + data->offset;
+
+ if (data->index == TI_CLKM_CM2)
+ cm2_base = mem + data->offset;
+
+ data->mem = mem;
+
+ data->np = np;
+
+ if (data->init && (data->flags & CM_SINGLE_INSTANCE ||
+ (cm_base && cm2_base)))
+ data->init(data);
+ }
+
+ return 0;
+}
+
+/**
+ * omap_cm_init - low level init for the CM drivers
+ *
+ * Initializes the low level clock infrastructure for CM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_cm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+
+ for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+ data = match->data;
+
+ if (data->flags & CM_NO_CLOCKS)
+ continue;
+
+ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 95a8cff..2c0e07e 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -63,7 +63,7 @@
* Populates the base addresses of the _cm_bases
* array used for read/write of cm module registers.
*/
-void omap_cm_base_init(void)
+static void omap_cm_base_init(void)
{
_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
@@ -514,8 +514,10 @@
.module_disable = &omap4_cminst_module_disable,
};
-int __init omap4_cm_init(void)
+int __init omap4_cm_init(const struct omap_prcm_init_data *data)
{
+ omap_cm_base_init();
+
return cm_register(&omap4xxx_cm_ll_data);
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 484cdad..eae6a0e 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -30,5 +30,4 @@
void __init omap_reserve(void)
{
omap_secure_ram_reserve_memblock();
- omap_barrier_reserve_memblock();
}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 46e2458..cf3cf22 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -200,9 +200,6 @@
void __init omap5_map_io(void);
void __init ti81xx_map_io(void);
-/* omap_barriers_init() is OMAP4 only */
-void omap_barriers_init(void);
-
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index da041b4..af95a62 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -14,6 +14,9 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include "soc.h"
#include "iomap.h"
@@ -25,13 +28,15 @@
#include "sdrc.h"
#include "pm.h"
#include "control.h"
+#include "clock.h"
/* Used by omap3_ctrl_save_padconf() */
#define START_PADCONF_SAVE 0x2
#define PADCONF_SAVE_DONE 0x1
static void __iomem *omap2_ctrl_base;
-static void __iomem *omap4_ctrl_pad_base;
+static s16 omap2_ctrl_offset;
+static struct regmap *omap2_ctrl_syscon;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
struct omap3_scratchpad {
@@ -133,66 +138,79 @@
static struct omap3_control_regs control_context;
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
-#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
-#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
-
-void __init omap2_set_globals_control(void __iomem *ctrl,
- void __iomem *ctrl_pad)
+void __init omap2_set_globals_control(void __iomem *ctrl)
{
omap2_ctrl_base = ctrl;
- omap4_ctrl_pad_base = ctrl_pad;
-}
-
-void __iomem *omap_ctrl_base_get(void)
-{
- return omap2_ctrl_base;
}
u8 omap_ctrl_readb(u16 offset)
{
- return readb_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+ u8 byte_offset = offset & 0x3;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xff;
}
u16 omap_ctrl_readw(u16 offset)
{
- return readw_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+ u16 byte_offset = offset & 0x2;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xffff;
}
u32 omap_ctrl_readl(u16 offset)
{
- return readl_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ val = readl_relaxed(omap2_ctrl_base + offset);
+ else
+ regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ &val);
+
+ return val;
}
void omap_ctrl_writeb(u8 val, u16 offset)
{
- writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
+ u32 tmp;
+ u8 byte_offset = offset & 0x3;
+
+ tmp = omap_ctrl_readl(offset);
+
+ tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
+
+ omap_ctrl_writel(tmp, offset);
}
void omap_ctrl_writew(u16 val, u16 offset)
{
- writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
+ u32 tmp;
+ u8 byte_offset = offset & 0x2;
+
+ tmp = omap_ctrl_readl(offset);
+
+ tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
+
+ omap_ctrl_writel(tmp, offset);
}
void omap_ctrl_writel(u32 val, u16 offset)
{
- writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
-}
-
-/*
- * On OMAP4 control pad are not addressable from control
- * core base. So the common omap_ctrl_read/write APIs breaks
- * Hence export separate APIs to manage the omap4 pad control
- * registers. This APIs will work only for OMAP4
- */
-
-u32 omap4_ctrl_pad_readl(u16 offset)
-{
- return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
-void omap4_ctrl_pad_writel(u32 val, u16 offset)
-{
- writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ writel_relaxed(val, omap2_ctrl_base + offset);
+ else
+ regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ val);
}
#ifdef CONFIG_ARCH_OMAP3
@@ -611,3 +629,120 @@
omap3_ctrl_setup_d2d_padconf();
}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+struct control_init_data {
+ int index;
+ s16 offset;
+};
+
+static struct control_init_data ctrl_data = {
+ .index = TI_CLKM_CTRL,
+};
+
+static const struct control_init_data omap2_ctrl_data = {
+ .index = TI_CLKM_CTRL,
+ .offset = -OMAP2_CONTROL_GENERAL,
+};
+
+static const struct of_device_id omap_scrm_dt_match_table[] = {
+ { .compatible = "ti,am3-scm", .data = &ctrl_data },
+ { .compatible = "ti,am4-scm", .data = &ctrl_data },
+ { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
+ { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
+ { }
+};
+
+/**
+ * omap2_control_base_init - initialize iomappings for the control driver
+ *
+ * Detects and initializes the iomappings for the control driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_control_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct control_init_data *data;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = (struct control_init_data *)match->data;
+
+ omap2_ctrl_base = of_iomap(np, 0);
+ if (!omap2_ctrl_base)
+ return -ENOMEM;
+
+ omap2_ctrl_offset = data->offset;
+ }
+
+ return 0;
+}
+
+/**
+ * omap_control_init - low level init for the control driver
+ *
+ * Initializes the low level clock infrastructure for control driver.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_control_init(void)
+{
+ struct device_node *np, *scm_conf;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+ struct regmap *syscon;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = match->data;
+
+ /*
+ * Check if we have scm_conf node, if yes, use this to
+ * access clock registers.
+ */
+ scm_conf = of_get_child_by_name(np, "scm_conf");
+
+ if (scm_conf) {
+ syscon = syscon_node_to_regmap(scm_conf);
+
+ if (IS_ERR(syscon))
+ return PTR_ERR(syscon);
+
+ omap2_ctrl_syscon = syscon;
+
+ if (of_get_child_by_name(scm_conf, "clocks")) {
+ ret = omap2_clk_provider_init(scm_conf,
+ data->index,
+ syscon, NULL);
+ if (ret)
+ return ret;
+ }
+
+ iounmap(omap2_ctrl_base);
+ omap2_ctrl_base = NULL;
+ } else {
+ /* No scm_conf found, direct access */
+ ret = omap2_clk_provider_init(np, data->index, NULL,
+ omap2_ctrl_base);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
+ *
+ * Legacy iomap init for clock provider. Needed only by legacy boot mode,
+ * where the base addresses are not parsed from DT, but still required
+ * by the clock driver to be setup properly.
+ */
+void __init omap3_control_legacy_iomap_init(void)
+{
+ omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8a4871..80d2b7d 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -440,15 +440,12 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
@@ -464,10 +461,11 @@
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
void omap3_ctrl_init(void);
-extern void omap2_set_globals_control(void __iomem *ctrl,
- void __iomem *ctrl_pad);
+int omap2_control_base_init(void);
+int omap_control_init(void);
+void omap2_set_globals_control(void __iomem *ctrl);
+void __init omap3_control_legacy_iomap_init(void);
#else
-#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#define omap_ctrl_readw(x) 0
#define omap_ctrl_readl(x) 0
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 7a050f9..f492ae1 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -26,6 +26,8 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <video/omapdss.h>
#include "omap_hwmod.h"
@@ -104,6 +106,10 @@
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
+#define OMAP4_DSIPHY_SYSCON_OFFSET 0x78
+
+static struct regmap *omap4_dsi_mux_syscon;
+
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
@@ -124,7 +130,7 @@
return -ENODEV;
}
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+ regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®);
reg &= ~enable_mask;
reg &= ~pipd_mask;
@@ -132,7 +138,7 @@
reg |= (lanes << enable_shift) & enable_mask;
reg |= (lanes << pipd_shift) & pipd_mask;
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+ regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg);
return 0;
}
@@ -665,5 +671,10 @@
return r;
}
+ /* add DSI info for omap4 */
+ node = of_find_node_by_name(NULL, "omap4_padconf_global");
+ if (node)
+ omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2a2f4d5..f8121db 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -52,7 +52,10 @@
int omap_type(void)
{
- u32 val = 0;
+ static u32 val = OMAP2_DEVICETYPE_MASK;
+
+ if (val < OMAP2_DEVICETYPE_MASK)
+ return val;
if (cpu_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c4871c5..820dde8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -306,7 +306,6 @@
void __init omap4_map_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- omap_barriers_init();
}
#endif
@@ -314,7 +313,6 @@
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
- omap_barriers_init();
}
#endif
/*
@@ -384,13 +382,9 @@
omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
+ omap2_control_base_init();
omap2xxx_check_revision();
- omap2xxx_prm_init();
- omap2xxx_cm_init();
+ omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
@@ -414,13 +408,9 @@
omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
+ omap2_control_base_init();
omap2xxx_check_revision();
- omap2xxx_prm_init();
- omap2xxx_cm_init();
+ omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
@@ -448,21 +438,30 @@
omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
+ /* XXX: remove these once OMAP3 is DT only */
+ if (!of_have_populated_dt()) {
+ omap2_set_globals_control(
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ NULL);
+ }
+ omap2_control_base_init();
omap3xxx_check_revision();
omap3xxx_check_features();
- omap3xxx_prm_init();
- omap3xxx_cm_init();
+ omap2_prcm_base_init();
+ /* XXX: remove these once OMAP3 is DT only */
+ if (!of_have_populated_dt()) {
+ omap3xxx_prm_init(NULL);
+ omap3xxx_cm_init(NULL);
+ }
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
if (!of_have_populated_dt()) {
- omap3_prcm_legacy_iomaps_init();
+ omap3_control_legacy_iomap_init();
if (soc_is_am35xx())
omap_clk_soc_init = am35xx_clk_legacy_init;
else if (cpu_is_omap3630())
@@ -549,14 +548,10 @@
{
omap2_set_globals_tap(TI814X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti81xx_clockdomains_init();
@@ -570,14 +565,10 @@
{
omap2_set_globals_tap(TI816X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti81xx_clockdomains_init();
@@ -593,14 +584,10 @@
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
- omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
- omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
@@ -619,16 +606,10 @@
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
- omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
- omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
- omap_prm_base_init();
- omap_cm_base_init();
+ omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
- omap44xx_prm_init();
- omap4_cm_init();
+ omap2_prcm_base_init();
am43xx_powerdomains_init();
am43xx_clockdomains_init();
am43xx_hwmod_init();
@@ -648,19 +629,12 @@
{
omap2_set_globals_tap(OMAP443X_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
- omap_prm_base_init();
- omap_cm_base_init();
+ omap2_control_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
- omap4_cm_init();
+ omap2_prcm_base_init();
omap4_pm_init_early();
- omap44xx_prm_init();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
@@ -683,18 +657,11 @@
{
omap2_set_globals_tap(OMAP54XX_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap2_control_base_init();
omap4_pm_init_early();
- omap_prm_base_init();
- omap_cm_base_init();
- omap44xx_prm_init();
+ omap2_prcm_base_init();
omap5xxx_check_revision();
- omap4_cm_init();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
@@ -715,18 +682,11 @@
void __init dra7xx_init_early(void)
{
omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap2_control_base_init();
omap4_pm_init_early();
- omap_prm_base_init();
- omap_cm_base_init();
- omap44xx_prm_init();
+ omap2_prcm_base_init();
dra7xxx_check_revision();
- omap4_cm_init();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
dra7xx_hwmod_init();
@@ -764,7 +724,11 @@
ti_clk_init_features();
if (of_have_populated_dt()) {
- ret = of_prcm_init();
+ ret = omap_control_init();
+ if (ret)
+ return ret;
+
+ ret = omap_prcm_init();
if (ret)
return ret;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 78064b0..176eef6 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1053,7 +1053,7 @@
struct omap_mux *entry;
#ifdef CONFIG_OMAP_MUX
- if (!superset->muxnames || !superset->muxnames[0]) {
+ if (!superset->muxnames[0]) {
superset++;
continue;
}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index dec2b05..af2851f 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -70,13 +70,6 @@
extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void set_cntfreq(void);
#else
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cee0fe1..afaac9e 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -52,75 +52,6 @@
#define IRQ_LOCALTIMER 29
-#ifdef CONFIG_OMAP4_ERRATA_I688
-/* Used to implement memory barrier on DRAM path */
-#define OMAP4_DRAM_BARRIER_VA 0xfe600000
-
-void __iomem *dram_sync, *sram_sync;
-
-static phys_addr_t paddr;
-static u32 size;
-
-void omap_bus_sync(void)
-{
- if (dram_sync && sram_sync) {
- writel_relaxed(readl_relaxed(dram_sync), dram_sync);
- writel_relaxed(readl_relaxed(sram_sync), sram_sync);
- isb();
- }
-}
-EXPORT_SYMBOL(omap_bus_sync);
-
-static int __init omap4_sram_init(void)
-{
- struct device_node *np;
- struct gen_pool *sram_pool;
-
- np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
- if (!np)
- pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
- __func__);
- sram_pool = of_get_named_gen_pool(np, "sram", 0);
- if (!sram_pool)
- pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
- __func__);
- else
- sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
-
- return 0;
-}
-omap_arch_initcall(omap4_sram_init);
-
-/* Steal one page physical memory for barrier implementation */
-int __init omap_barrier_reserve_memblock(void)
-{
-
- size = ALIGN(PAGE_SIZE, SZ_1M);
- paddr = arm_memblock_steal(size, SZ_1M);
-
- return 0;
-}
-
-void __init omap_barriers_init(void)
-{
- struct map_desc dram_io_desc[1];
-
- dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
- dram_io_desc[0].pfn = __phys_to_pfn(paddr);
- dram_io_desc[0].length = size;
- dram_io_desc[0].type = MT_MEMORY_RW_SO;
- iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
- dram_sync = (void __iomem *) dram_io_desc[0].virtual;
-
- pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
- (long long) paddr, dram_io_desc[0].virtual);
-
-}
-#else
-void __init omap_barriers_init(void)
-{}
-#endif
-
void gic_dist_disable(void)
{
if (gic_dist_base_addr)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index fe01c5a..b1aad7e 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@
/* Clear old wake-up events */
/* REVISIT: These write to reserved bits? */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,18 +104,16 @@
clk_enable(osc_ck);
/* clear CORE wake-up events */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
/* MPU domain wake events */
- omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
- 0x1);
+ omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
- omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
- 0x20);
+ omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -143,9 +141,9 @@
* it is in retention mode. */
if (omap2_allow_mpu_retention()) {
/* REVISIT: These write to reserved bits? */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
/* Try to enter MPU retention */
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 88721df..87b98bf9 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -137,9 +137,8 @@
{
int c;
- c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK |
- OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
return c ? IRQ_HANDLED : IRQ_NONE;
}
@@ -153,14 +152,13 @@
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK |
- OMAP3430_ST_IO_CHAIN_MASK);
- c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
+ c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+ c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+ c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6163d66..6ae0b3a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -518,6 +518,26 @@
.priority = _priority \
}
+/**
+ * struct omap_prcm_init_data - PRCM driver init data
+ * @index: clock memory mapping index to be used
+ * @mem: IO mem pointer for this module
+ * @offset: module base address offset from the IO base
+ * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
+ * @init: low level PRCM init function for this module
+ * @np: device node for this PRCM module
+ */
+struct omap_prcm_init_data {
+ int index;
+ void __iomem *mem;
+ s16 offset;
+ u16 flags;
+ s32 device_inst_offset;
+ int (*init)(const struct omap_prcm_init_data *data);
+ struct device_node *np;
+};
+
extern void omap_prcm_irq_cleanup(void);
extern int omap_prcm_register_chain_handler(
struct omap_prcm_irq_setup *irq_setup);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index b9061a6..233bc84 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -19,8 +19,9 @@
extern void __iomem *prm_base;
extern u16 prm_features;
extern void omap2_set_globals_prm(void __iomem *prm);
-int of_prcm_init(void);
-void omap3_prcm_legacy_iomaps_init(void);
+int omap_prcm_init(void);
+int omap2_prm_base_init(void);
+int omap2_prcm_base_init(void);
# endif
/*
@@ -28,9 +29,11 @@
*
* PRM_HAS_IO_WAKEUP: has IO wakeup capability
* PRM_HAS_VOLTAGE: has voltage domains
+ * PRM_IRQ_DEFAULT: use default irq number for PRM irq
*/
-#define PRM_HAS_IO_WAKEUP (1 << 0)
-#define PRM_HAS_VOLTAGE (1 << 1)
+#define PRM_HAS_IO_WAKEUP BIT(0)
+#define PRM_HAS_VOLTAGE BIT(1)
+#define PRM_IRQ_DEFAULT BIT(2)
/*
* MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
@@ -146,6 +149,9 @@
int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
u16 offset);
void (*reset_system)(void);
+ int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
+ u32 (*vp_check_txdone)(u8 vp_id);
+ void (*vp_clear_txdone)(u8 vp_id);
};
extern int prm_register(struct prm_ll_data *pld);
@@ -161,6 +167,19 @@
void omap_prm_reset_system(void);
void omap_prm_reconfigure_io_chain(void);
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
+u32 omap_prm_vp_check_txdone(u8 vp_id);
+void omap_prm_vp_clear_txdone(u8 vp_id);
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index af0f152..752018c 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -123,13 +123,14 @@
* Clears wakeup status bits for a given module, so that the device can
* re-enter idle.
*/
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
{
u32 wkst;
wkst = omap2_prm_read_mod_reg(module, regs);
wkst &= wkst_mask;
omap2_prm_write_mod_reg(wkst, module, regs);
+ return 0;
}
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
@@ -216,9 +217,10 @@
.deassert_hardreset = &omap2_prm_deassert_hardreset,
.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
.reset_system = &omap2xxx_prm_dpll_reset,
+ .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
};
-int __init omap2xxx_prm_init(void)
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
{
return prm_register(&omap2xxx_prm_ll_data);
}
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 1d51643..9008a9e 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,9 +124,7 @@
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
-
-extern int __init omap2xxx_prm_init(void);
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
#endif
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 02f62860..dcb5001 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -378,7 +378,7 @@
.reset_system = am33xx_prm_global_warm_sw_reset,
};
-int __init am33xx_prm_init(void)
+int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
{
return prm_register(&am33xx_prm_ll_data);
}
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 98ac41f..2bc4ec5 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -118,7 +118,7 @@
#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
#ifndef __ASSEMBLER__
-int am33xx_prm_init(void);
+int am33xx_prm_init(const struct omap_prcm_init_data *data);
#endif /* ASSEMBLER */
#endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 5713bbd..62680aa 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -29,6 +29,7 @@
#include "prm-regbits-34xx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "clock.h"
static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
static void omap3xxx_prm_ocp_barrier(void);
@@ -96,7 +97,7 @@
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+static u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
@@ -106,7 +107,7 @@
return irqstatus & vp->tranxdone_status;
}
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+static void omap3_prm_vp_clear_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
@@ -217,7 +218,7 @@
* omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
* @module: PRM module to clear wakeups from
* @regs: register set to clear, 1 or 3
- * @ignore_bits: wakeup status bits to ignore
+ * @wkst_mask: wkst bits to clear
*
* The purpose of this function is to clear any wake-up events latched
* in the PRCM PM_WKST_x registers. It is possible that a wake-up event
@@ -226,7 +227,7 @@
* that any peripheral wake-up events occurring while attempting to
* clear the PM_WKST_x are detected and cleared.
*/
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
{
u32 wkst, fclk, iclk, clken;
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -238,7 +239,7 @@
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
+ wkst &= wkst_mask;
if (wkst) {
iclk = omap2_cm_read_mod_reg(module, iclk_off);
fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -254,7 +255,7 @@
omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
omap2_prm_write_mod_reg(wkst, module, wkst_off);
wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
+ wkst &= wkst_mask;
c++;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
@@ -664,10 +665,15 @@
.deassert_hardreset = &omap2_prm_deassert_hardreset,
.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
.reset_system = &omap3xxx_prm_dpll3_reset,
+ .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
+ .vp_check_txdone = &omap3_prm_vp_check_txdone,
+ .vp_clear_txdone = &omap3_prm_vp_clear_txdone,
};
-int __init omap3xxx_prm_init(void)
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
{
+ omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+ prm_base + OMAP3430_IVA2_MOD);
if (omap3_has_io_wakeup())
prm_features |= PRM_HAS_IO_WAKEUP;
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index ed8a3d8..5f095ee 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -132,10 +132,6 @@
#ifndef __ASSEMBLER__
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
/*
* OMAP3 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
@@ -144,8 +140,7 @@
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
void omap3xxx_prm_iva_idle(void);
void omap3_prm_reset_modem(void);
int omap3xxx_prm_clear_global_cold_reset(void);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a08a617..c35ad0b 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -138,7 +138,7 @@
},
};
-u32 omap4_prm_vp_check_txdone(u8 vp_id)
+static u32 omap4_prm_vp_check_txdone(u8 vp_id)
{
struct omap4_vp *vp = &omap4_vp[vp_id];
u32 irqstatus;
@@ -149,7 +149,7 @@
return irqstatus & vp->tranxdone_status;
}
-void omap4_prm_vp_clear_txdone(u8 vp_id)
+static void omap4_prm_vp_clear_txdone(u8 vp_id)
{
struct omap4_vp *vp = &omap4_vp[vp_id];
@@ -699,29 +699,31 @@
.deassert_hardreset = omap4_prminst_deassert_hardreset,
.is_hardreset_asserted = omap4_prminst_is_hardreset_asserted,
.reset_system = omap4_prminst_global_warm_sw_reset,
+ .vp_check_txdone = omap4_prm_vp_check_txdone,
+ .vp_clear_txdone = omap4_prm_vp_clear_txdone,
};
-int __init omap44xx_prm_init(void)
+static const struct omap_prcm_init_data *prm_init_data;
+
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
{
- if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
+ omap_prm_base_init();
+
+ prm_init_data = data;
+
+ if (data->flags & PRM_HAS_IO_WAKEUP)
prm_features |= PRM_HAS_IO_WAKEUP;
- if (!soc_is_dra7xx())
+ if (data->flags & PRM_HAS_VOLTAGE)
prm_features |= PRM_HAS_VOLTAGE;
+ omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
return prm_register(&omap44xx_prm_ll_data);
}
-static const struct of_device_id omap_prm_dt_match_table[] = {
- { .compatible = "ti,omap4-prm" },
- { .compatible = "ti,omap5-prm" },
- { .compatible = "ti,dra7-prm" },
- { }
-};
-
static int omap44xx_prm_late_init(void)
{
- struct device_node *np;
int irq_num;
if (!(prm_features & PRM_HAS_IO_WAKEUP))
@@ -731,31 +733,23 @@
if (!of_have_populated_dt())
return 0;
- np = of_find_matching_node(NULL, omap_prm_dt_match_table);
+ irq_num = of_irq_get(prm_init_data->np, 0);
+ /*
+ * Already have OMAP4 IRQ num. For all other platforms, we need
+ * IRQ numbers from DT
+ */
+ if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+ if (irq_num == -EPROBE_DEFER)
+ return irq_num;
- if (!np) {
- /* Default loaded up with OMAP4 values */
- if (!cpu_is_omap44xx())
- return 0;
- } else {
- irq_num = of_irq_get(np, 0);
- /*
- * Already have OMAP4 IRQ num. For all other platforms, we need
- * IRQ numbers from DT
- */
- if (irq_num < 0 && !cpu_is_omap44xx()) {
- if (irq_num == -EPROBE_DEFER)
- return irq_num;
+ /* Have nothing to do */
+ return 0;
+ }
- /* Have nothing to do */
- return 0;
- }
-
- /* Once OMAP4 DT is filled as well */
- if (irq_num >= 0) {
- omap4_prcm_irq_setup.irq = irq_num;
- omap4_prcm_irq_setup.xlate_irq = NULL;
- }
+ /* Once OMAP4 DT is filled as well */
+ if (irq_num >= 0) {
+ omap4_prcm_irq_setup.irq = irq_num;
+ omap4_prcm_irq_setup.xlate_irq = NULL;
}
omap44xx_prm_enable_io_wakeup();
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7db2422..efd6035 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -26,7 +26,6 @@
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
#include "prm44xx_54xx.h"
-#include "prcm-common.h"
#include "prm.h"
#define OMAP4430_PRM_BASE 0x4a306000
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7143295..3f139eb 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -23,13 +23,11 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
+#include "prcm-common.h"
+
/* Function prototypes */
#ifndef __ASSEMBLER__
-/* OMAP4/OMAP5-specific VP functions */
-u32 omap4_prm_vp_check_txdone(u8 vp_id);
-void omap4_prm_vp_clear_txdone(u8 vp_id);
-
/*
* OMAP4/OMAP5 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
@@ -38,7 +36,7 @@
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-extern int __init omap44xx_prm_init(void);
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data);
#endif
diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h
index e441101..1eb22ff 100644
--- a/arch/arm/mach-omap2/prm54xx.h
+++ b/arch/arm/mach-omap2/prm54xx.h
@@ -22,7 +22,6 @@
#define __ARCH_ARM_MACH_OMAP2_PRM54XX_H
#include "prm44xx_54xx.h"
-#include "prcm-common.h"
#include "prm.h"
#define OMAP54XX_PRM_BASE 0x4ae06000
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index 4bb50fbf..cc1e6a2 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -22,8 +22,8 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
-#include "prm44xx_54xx.h"
#include "prcm-common.h"
+#include "prm44xx_54xx.h"
#include "prm.h"
#define DRA7XX_PRM_BASE 0x4ae06000
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index bfaa7ba..7add799 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -32,7 +32,11 @@
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
+#include "prm33xx.h"
#include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
#include "common.h"
#include "clock.h"
#include "cm.h"
@@ -534,6 +538,61 @@
}
/**
+ * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register to clear
+ * @wkst_mask: wkst bits to clear
+ *
+ * Clears any wakeup events for the module and register set defined.
+ * Uses SoC specific implementation to do the actual wakeup status
+ * clearing.
+ */
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ if (!prm_ll_data->clear_mod_irqs) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
+}
+
+/**
+ * omap_prm_vp_check_txdone - check voltage processor TX done status
+ *
+ * Checks if voltage processor transmission has been completed.
+ * Returns non-zero if a transmission has completed, 0 otherwise.
+ */
+u32 omap_prm_vp_check_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_check_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return 0;
+ }
+
+ return prm_ll_data->vp_check_txdone(vp_id);
+}
+
+/**
+ * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ *
+ * Clears the status bit for completed voltage processor transmission
+ * returned by prm_vp_check_txdone.
+ */
+void omap_prm_vp_clear_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_clear_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return;
+ }
+
+ prm_ll_data->vp_clear_txdone(vp_id);
+}
+
+/**
* prm_register - register per-SoC low-level data with the PRM
* @pld: low-level per-SoC OMAP PRM data & function pointers to register
*
@@ -578,78 +637,175 @@
return 0;
}
-static const struct of_device_id omap_prcm_dt_match_table[] = {
- { .compatible = "ti,am3-prcm" },
- { .compatible = "ti,am3-scrm" },
- { .compatible = "ti,am4-prcm" },
- { .compatible = "ti,am4-scrm" },
- { .compatible = "ti,dm814-prcm" },
- { .compatible = "ti,dm814-scrm" },
- { .compatible = "ti,dm816-prcm" },
- { .compatible = "ti,dm816-scrm" },
- { .compatible = "ti,omap2-prcm" },
- { .compatible = "ti,omap2-scrm" },
- { .compatible = "ti,omap3-prm" },
- { .compatible = "ti,omap3-cm" },
- { .compatible = "ti,omap3-scrm" },
- { .compatible = "ti,omap4-cm1" },
- { .compatible = "ti,omap4-prm" },
- { .compatible = "ti,omap4-cm2" },
- { .compatible = "ti,omap4-scrm" },
- { .compatible = "ti,omap5-prm" },
- { .compatible = "ti,omap5-cm-core-aon" },
- { .compatible = "ti,omap5-scrm" },
- { .compatible = "ti,omap5-cm-core" },
- { .compatible = "ti,dra7-prm" },
- { .compatible = "ti,dra7-cm-core-aon" },
- { .compatible = "ti,dra7-cm-core" },
+#ifdef CONFIG_ARCH_OMAP2
+static struct omap_prcm_init_data omap2_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap2xxx_prm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap_prcm_init_data omap3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap3xxx_prm_init,
+
+ /*
+ * IVA2 offset is a negative value, must offset the prm_base
+ * address by this to get it to positive
+ */
+ .offset = -OMAP3430_IVA2_MOD,
+};
+#endif
+
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
+static struct omap_prcm_init_data am3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = am33xx_prm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct omap_prcm_init_data omap4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
+};
+#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP,
+};
+#endif
+
+#ifdef CONFIG_SOC_AM43XX
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = AM43XX_PRM_DEVICE_INST,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static struct omap_prcm_init_data scrm_data __initdata = {
+ .index = TI_CLKM_SCRM,
+};
+#endif
+
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+#ifdef CONFIG_SOC_AM33XX
+ { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+ { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP2
+ { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ { .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
+ { .compatible = "ti,omap4-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+ { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
+ { .compatible = "ti,omap5-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
+#endif
{ }
};
-static struct clk_hw_omap memmap_dummy_ck = {
- .flags = MEMMAP_ADDRESSING,
-};
-
-static u32 prm_clk_readl(void __iomem *reg)
-{
- return omap2_clk_readl(&memmap_dummy_ck, reg);
-}
-
-static void prm_clk_writel(u32 val, void __iomem *reg)
-{
- omap2_clk_writel(val, &memmap_dummy_ck, reg);
-}
-
-static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = prm_clk_readl,
- .clk_writel = prm_clk_writel,
-};
-
-int __init of_prcm_init(void)
+/**
+ * omap2_prm_base_init - initialize iomappings for the PRM driver
+ *
+ * Detects and initializes the iomappings for the PRM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_prm_base_init(void)
{
struct device_node *np;
+ const struct of_device_id *match;
+ struct omap_prcm_init_data *data;
void __iomem *mem;
- int memmap_index = 0;
- ti_clk_ll_ops = &omap_clk_ll_ops;
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = (struct omap_prcm_init_data *)match->data;
- for_each_matching_node(np, omap_prcm_dt_match_table) {
mem = of_iomap(np, 0);
- clk_memmaps[memmap_index] = mem;
- ti_dt_clk_init_provider(np, memmap_index);
- memmap_index++;
+ if (!mem)
+ return -ENOMEM;
+
+ if (data->index == TI_CLKM_PRM)
+ prm_base = mem + data->offset;
+
+ data->mem = mem;
+
+ data->np = np;
+
+ if (data->init)
+ data->init(data);
}
return 0;
}
-void __init omap3_prcm_legacy_iomaps_init(void)
+int __init omap2_prcm_base_init(void)
{
- ti_clk_ll_ops = &omap_clk_ll_ops;
+ int ret;
- clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD;
- clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD;
- clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get();
+ ret = omap2_prm_base_init();
+ if (ret)
+ return ret;
+
+ return omap2_cm_base_init();
+}
+
+/**
+ * omap_prcm_init - low level init for the PRCM drivers
+ *
+ * Initializes the low level clock infrastructure for PRCM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_prcm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = match->data;
+
+ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
+ if (ret)
+ return ret;
+ }
+
+ omap_cm_init();
+
+ return 0;
}
static int __init prm_late_init(void)
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1..c4859c4 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@
s32 omap4_prmst_get_prm_dev_inst(void)
{
- if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
- return prm_dev_inst;
-
- /* This cannot be done way early at boot.. as things are not setup */
- if (cpu_is_omap44xx())
- prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
- else if (soc_is_omap54xx())
- prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
- else if (soc_is_dra7xx())
- prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
- else if (soc_is_am43xx())
- prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
return prm_dev_inst;
}
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+ prm_dev_inst = dev_inst;
+}
+
/* Read a register in a PRM instance */
u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index fb1c9d7..0c03d0731 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -14,6 +14,7 @@
#define PRM_INSTANCE_UNKNOWN -1
extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
/*
* In an ideal world, we would not export these low-level functions,
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index b84a012..ad1bb94 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -333,11 +333,9 @@
#endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */
-#ifndef CONFIG_OMAP4_ERRATA_I688
ENTRY(omap_bus_sync)
ret lr
ENDPROC(omap_bus_sync)
-#endif
ENTRY(omap_do_wfi)
stmfd sp!, {lr}
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 0fdf7080..7e08296 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -21,15 +21,6 @@
struct voltagedomain;
-/*
- * Voltage Processor (VP) identifiers
- */
-#define OMAP3_VP_VDD_MPU_ID 0
-#define OMAP3_VP_VDD_CORE_ID 1
-#define OMAP4_VP_VDD_CORE_ID 0
-#define OMAP4_VP_VDD_IVA_ID 1
-#define OMAP4_VP_VDD_MPU_ID 2
-
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 1914e02..b0590fe 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -28,8 +28,8 @@
#include "prm2xxx_3xxx.h"
static const struct omap_vp_ops omap3_vp_ops = {
- .check_txdone = omap3_prm_vp_check_txdone,
- .clear_txdone = omap3_prm_vp_clear_txdone,
+ .check_txdone = omap_prm_vp_check_txdone,
+ .clear_txdone = omap_prm_vp_clear_txdone,
};
/*
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index e62f6b0..2448bb9 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -28,8 +28,8 @@
#include "vp.h"
static const struct omap_vp_ops omap4_vp_ops = {
- .check_txdone = omap4_prm_vp_check_txdone,
- .clear_txdone = omap4_prm_vp_clear_txdone,
+ .check_txdone = omap_prm_vp_check_txdone,
+ .clear_txdone = omap_prm_vp_clear_txdone,
};
/*
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 27f3296..4eac8dc 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -34,6 +34,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -41,6 +42,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -48,6 +50,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -55,6 +58,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index d429129..133ee59 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -39,6 +39,7 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
};
A57_1: cpu@1 {
@@ -46,6 +47,7 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
};
A53_0: cpu@100 {
@@ -53,6 +55,7 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_1: cpu@101 {
@@ -60,6 +63,7 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_2: cpu@102 {
@@ -67,6 +71,7 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_3: cpu@103 {
@@ -74,6 +79,15 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index efc59b3..20addab 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -37,6 +37,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -44,6 +45,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -51,6 +53,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -58,6 +61,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index 5720608..abb79b3 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
aes-neon-blk-y := aes-glue-neon.o aes-neon.o
-AFLAGS_aes-ce.o := -DINTERLEAVE=2 -DINTERLEAVE_INLINE
+AFLAGS_aes-ce.o := -DINTERLEAVE=4
AFLAGS_aes-neon.o := -DINTERLEAVE=4
CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 5901480..750bac4 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -20,6 +20,9 @@
#error "Only include this from assembly code"
#endif
+#ifndef __ASM_ASSEMBLER_H
+#define __ASM_ASSEMBLER_H
+
#include <asm/ptrace.h>
#include <asm/thread_info.h>
@@ -155,3 +158,5 @@
#endif
orr \rd, \lbits, \hbits, lsl #32
.endm
+
+#endif /* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h
index 0710654..c60643f 100644
--- a/arch/arm64/include/asm/cpuidle.h
+++ b/arch/arm64/include/asm/cpuidle.h
@@ -1,6 +1,8 @@
#ifndef __ASM_CPUIDLE_H
#define __ASM_CPUIDLE_H
+#include <asm/proc-fns.h>
+
#ifdef CONFIG_CPU_IDLE
extern int cpu_init_idle(unsigned int cpu);
extern int cpu_suspend(unsigned long arg);
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index e2ff32a..d2f4942 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -264,8 +264,10 @@
__AARCH64_INSN_FUNCS(bics, 0x7F200000, 0x6A200000)
__AARCH64_INSN_FUNCS(b, 0xFC000000, 0x14000000)
__AARCH64_INSN_FUNCS(bl, 0xFC000000, 0x94000000)
-__AARCH64_INSN_FUNCS(cbz, 0xFE000000, 0x34000000)
-__AARCH64_INSN_FUNCS(cbnz, 0xFE000000, 0x35000000)
+__AARCH64_INSN_FUNCS(cbz, 0x7F000000, 0x34000000)
+__AARCH64_INSN_FUNCS(cbnz, 0x7F000000, 0x35000000)
+__AARCH64_INSN_FUNCS(tbz, 0x7F000000, 0x36000000)
+__AARCH64_INSN_FUNCS(tbnz, 0x7F000000, 0x37000000)
__AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000)
__AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001)
__AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 16449c5..800ec0e 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -460,7 +460,7 @@
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
- PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
+ PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index f9be30e..20e9591 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -45,7 +45,8 @@
#define STACK_TOP STACK_TOP_MAX
#endif /* CONFIG_COMPAT */
-#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK
+extern phys_addr_t arm64_dma_phys_limit;
+#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1)
#endif /* __KERNEL__ */
struct debug_info {
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index 73f0ce5..4abe9b9 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -24,11 +24,6 @@
#include <linux/sched.h>
#include <asm/cputype.h>
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-extern struct cpu_tlb_fns cpu_tlb;
-
/*
* TLB Management
* ==============
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index bef04af..5ee07ee 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -15,8 +15,9 @@
arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
- hyp-stub.o psci.o cpu_ops.o insn.o return_address.o \
- cpuinfo.o cpu_errata.o alternative.o cacheinfo.o
+ hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \
+ return_address.o cpuinfo.o cpu_errata.o \
+ alternative.o cacheinfo.o
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o \
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index cf8556a..c851be7 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -156,7 +156,7 @@
branch = aarch64_insn_gen_branch_imm(pc,
(unsigned long)ftrace_graph_caller,
- AARCH64_INSN_BRANCH_LINK);
+ AARCH64_INSN_BRANCH_NOLINK);
nop = aarch64_insn_gen_nop();
if (enable)
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 27d4864..c8eca88 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -87,8 +87,10 @@
if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX))
page = vmalloc_to_page(addr);
- else
+ else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA))
page = virt_to_page(addr);
+ else
+ return addr;
BUG_ON(!page);
set_fixmap(fixmap, page_to_phys(page));
diff --git a/arch/arm64/kernel/psci-call.S b/arch/arm64/kernel/psci-call.S
new file mode 100644
index 0000000..cf83e61
--- /dev/null
+++ b/arch/arm64/kernel/psci-call.S
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+
+/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
+ENTRY(__invoke_psci_fn_hvc)
+ hvc #0
+ ret
+ENDPROC(__invoke_psci_fn_hvc)
+
+/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
+ENTRY(__invoke_psci_fn_smc)
+ smc #0
+ ret
+ENDPROC(__invoke_psci_fn_smc)
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 3425f31..9b8a70a 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -57,6 +57,9 @@
static int (*invoke_psci_fn)(u64, u64, u64, u64);
typedef int (*psci_initcall_t)(const struct device_node *);
+asmlinkage int __invoke_psci_fn_hvc(u64, u64, u64, u64);
+asmlinkage int __invoke_psci_fn_smc(u64, u64, u64, u64);
+
enum psci_function {
PSCI_FN_CPU_SUSPEND,
PSCI_FN_CPU_ON,
@@ -109,40 +112,6 @@
PSCI_0_2_POWER_STATE_AFFL_SHIFT;
}
-/*
- * The following two functions are invoked via the invoke_psci_fn pointer
- * and will not be inlined, allowing us to piggyback on the AAPCS.
- */
-static noinline int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1,
- u64 arg2)
-{
- asm volatile(
- __asmeq("%0", "x0")
- __asmeq("%1", "x1")
- __asmeq("%2", "x2")
- __asmeq("%3", "x3")
- "hvc #0\n"
- : "+r" (function_id)
- : "r" (arg0), "r" (arg1), "r" (arg2));
-
- return function_id;
-}
-
-static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
- u64 arg2)
-{
- asm volatile(
- __asmeq("%0", "x0")
- __asmeq("%1", "x1")
- __asmeq("%2", "x2")
- __asmeq("%3", "x3")
- "smc #0\n"
- : "+r" (function_id)
- : "r" (arg0), "r" (arg1), "r" (arg2));
-
- return function_id;
-}
-
static int psci_get_version(void)
{
int err;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index c20a300..d26fcd4 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -154,8 +154,7 @@
case __SI_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
- err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
- &to->si_ptr);
+ err |= __put_user(from->si_int, &to->si_int);
break;
case __SI_POLL:
err |= __put_user(from->si_band, &to->si_band);
@@ -184,7 +183,7 @@
case __SI_MESGQ: /* But this is */
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
+ err |= __put_user(from->si_int, &to->si_int);
break;
case __SI_SYS:
err |= __put_user((compat_uptr_t)(unsigned long)
diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S
index fe652ff..efa79e8 100644
--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -174,8 +174,6 @@
/* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */
ENTRY(__kernel_clock_getres)
.cfi_startproc
- cbz w1, 3f
-
cmp w0, #CLOCK_REALTIME
ccmp w0, #CLOCK_MONOTONIC, #0x4, ne
b.ne 1f
@@ -188,6 +186,7 @@
b.ne 4f
ldr x2, 6f
2:
+ cbz w1, 3f
stp xzr, x2, [x1]
3: /* res == NULL. */
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 0a24b9b..58e0c2b 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -348,8 +348,6 @@
.mapping_error = swiotlb_dma_mapping_error,
};
-extern int swiotlb_late_init_with_default_size(size_t default_size);
-
static int __init atomic_pool_init(void)
{
pgprot_t prot = __pgprot(PROT_NORMAL_NC);
@@ -411,21 +409,13 @@
return -ENOMEM;
}
-static int __init swiotlb_late_init(void)
+static int __init arm64_dma_init(void)
{
- size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT);
+ int ret;
dma_ops = &swiotlb_dma_ops;
- return swiotlb_late_init_with_default_size(swiotlb_size);
-}
-
-static int __init arm64_dma_init(void)
-{
- int ret = 0;
-
- ret |= swiotlb_late_init();
- ret |= atomic_pool_init();
+ ret = atomic_pool_init();
return ret;
}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 71145f9..ae85da6 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -33,6 +33,7 @@
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
#include <linux/efi.h>
+#include <linux/swiotlb.h>
#include <asm/fixmap.h>
#include <asm/memory.h>
@@ -45,6 +46,7 @@
#include "mm.h"
phys_addr_t memstart_addr __read_mostly = 0;
+phys_addr_t arm64_dma_phys_limit __read_mostly;
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
@@ -85,7 +87,7 @@
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA)) {
- max_dma = PFN_DOWN(max_zone_dma_phys());
+ max_dma = PFN_DOWN(arm64_dma_phys_limit);
zone_size[ZONE_DMA] = max_dma - min;
}
zone_size[ZONE_NORMAL] = max - max_dma;
@@ -156,8 +158,6 @@
void __init arm64_memblock_init(void)
{
- phys_addr_t dma_phys_limit = 0;
-
memblock_enforce_memory_limit(memory_limit);
/*
@@ -174,8 +174,10 @@
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
- dma_phys_limit = max_zone_dma_phys();
- dma_contiguous_reserve(dma_phys_limit);
+ arm64_dma_phys_limit = max_zone_dma_phys();
+ else
+ arm64_dma_phys_limit = PHYS_MASK + 1;
+ dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
memblock_dump_all();
@@ -276,6 +278,8 @@
*/
void __init mem_init(void)
{
+ swiotlb_init(1);
+
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
#ifndef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 93bcf2a..07d7a7e 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -123,12 +123,14 @@
#define PGDIR_MASK (~(PGDIR_SIZE - 1))
#define PTRS_PER_PGD 64
+#define __PAGETABLE_PUD_FOLDED
#define PUD_SHIFT 26
#define PTRS_PER_PUD 1
#define PUD_SIZE (1UL << PUD_SHIFT)
#define PUD_MASK (~(PUD_SIZE - 1))
#define PUE_SIZE 256
+#define __PAGETABLE_PMD_FOLDED
#define PMD_SHIFT 26
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE - 1))
diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
index 8fd8ee7..421e6ba 100644
--- a/arch/m32r/include/asm/pgtable-2level.h
+++ b/arch/m32r/include/asm/pgtable-2level.h
@@ -13,6 +13,7 @@
* the M32R is two-level, so we don't really have any
* PMD directory physically.
*/
+#define __PAGETABLE_PMD_FOLDED
#define PMD_SHIFT 22
#define PTRS_PER_PMD 1
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 28a145b..35ed4a9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -54,10 +54,12 @@
*/
#ifdef CONFIG_SUN3
#define PTRS_PER_PTE 16
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
#elif defined(CONFIG_COLDFIRE)
#define PTRS_PER_PTE 512
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 1024
#else
diff --git a/arch/metag/include/asm/processor.h b/arch/metag/include/asm/processor.h
index 881071c..13272fd 100644
--- a/arch/metag/include/asm/processor.h
+++ b/arch/metag/include/asm/processor.h
@@ -149,8 +149,8 @@
unsigned long get_wchan(struct task_struct *p);
-#define KSTK_EIP(tsk) ((tsk)->thread.kernel_context->CurrPC)
-#define KSTK_ESP(tsk) ((tsk)->thread.kernel_context->AX[0].U0)
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ctx.CurrPC)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->ctx.AX[0].U0)
#define user_stack_pointer(regs) ((regs)->ctx.AX[0].U0)
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index afab728..96d3f9d 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -56,7 +56,9 @@
#define PGDIR_SHIFT 22
#define PTRS_PER_PGD 1024
#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
+#define __PAGETABLE_PUD_FOLDED
#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PTE 1024
#define PGD_SIZE PAGE_SIZE
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 8c966b2..15207b9 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -96,6 +96,7 @@
#if PT_NLEVELS == 3
#define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
#else
+#define __PAGETABLE_PMD_FOLDED
#define BITS_PER_PMD 0
#endif
#define PTRS_PER_PMD (1UL << BITS_PER_PMD)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index fbb5ee3..e08ec38 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -91,7 +91,9 @@
*/
#define PTRS_PER_PTE 256
#ifndef CONFIG_64BIT
+#define __PAGETABLE_PUD_FOLDED
#define PTRS_PER_PMD 1
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PUD 1
#else /* CONFIG_64BIT */
#define PTRS_PER_PMD 2048
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b5c8ff5..2346c95 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1396,6 +1396,12 @@
wait_for_master_cpu(cpu);
+ /*
+ * Initialize the CR4 shadow before doing anything that could
+ * try to read it.
+ */
+ cr4_init_shadow();
+
show_ucode_info_early();
printk(KERN_INFO "Initializing CPU#%d\n", cpu);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 94d7dcb..50163fa 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -565,8 +565,8 @@
{ 0xb2, TLB_INST_4K, 64, " TLB_INST 4KByte pages, 4-way set associative" },
{ 0xb3, TLB_DATA_4K, 128, " TLB_DATA 4 KByte pages, 4-way set associative" },
{ 0xb4, TLB_DATA_4K, 256, " TLB_DATA 4 KByte pages, 4-way associative" },
- { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set ssociative" },
- { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set ssociative" },
+ { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set associative" },
+ { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set associative" },
{ 0xba, TLB_DATA_4K, 64, " TLB_DATA 4 KByte pages, 4-way associative" },
{ 0xc0, TLB_DATA_4K_4M, 8, " TLB_DATA 4 KByte and 4 MByte pages, 4-way associative" },
{ 0xc1, STLB_4K_2M, 1024, " STLB 4 KByte and 2 MByte pages, 8-way associative" },
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 000d419..31e2d5b 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -982,6 +982,9 @@
ENTRY(xen_do_upcall)
1: mov %esp, %eax
call xen_evtchn_do_upcall
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
jmp ret_from_intr
CFI_ENDPROC
ENDPROC(xen_hypervisor_callback)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index db13655..10074ad 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1208,6 +1208,9 @@
popq %rsp
CFI_DEF_CFA_REGISTER rsp
decl PER_CPU_VAR(irq_count)
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
jmp error_exit
CFI_ENDPROC
END(xen_do_hypervisor_callback)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 6a1146e..4e3d5a96 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -223,27 +223,48 @@
__recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
{
struct kprobe *kp;
+ unsigned long faddr;
kp = get_kprobe((void *)addr);
- /* There is no probe, return original address */
- if (!kp)
+ faddr = ftrace_location(addr);
+ /*
+ * Addresses inside the ftrace location are refused by
+ * arch_check_ftrace_location(). Something went terribly wrong
+ * if such an address is checked here.
+ */
+ if (WARN_ON(faddr && faddr != addr))
+ return 0UL;
+ /*
+ * Use the current code if it is not modified by Kprobe
+ * and it cannot be modified by ftrace.
+ */
+ if (!kp && !faddr)
return addr;
/*
- * Basically, kp->ainsn.insn has an original instruction.
- * However, RIP-relative instruction can not do single-stepping
- * at different place, __copy_instruction() tweaks the displacement of
- * that instruction. In that case, we can't recover the instruction
- * from the kp->ainsn.insn.
+ * Basically, kp->ainsn.insn has an original instruction.
+ * However, RIP-relative instruction can not do single-stepping
+ * at different place, __copy_instruction() tweaks the displacement of
+ * that instruction. In that case, we can't recover the instruction
+ * from the kp->ainsn.insn.
*
- * On the other hand, kp->opcode has a copy of the first byte of
- * the probed instruction, which is overwritten by int3. And
- * the instruction at kp->addr is not modified by kprobes except
- * for the first byte, we can recover the original instruction
- * from it and kp->opcode.
+ * On the other hand, in case on normal Kprobe, kp->opcode has a copy
+ * of the first byte of the probed instruction, which is overwritten
+ * by int3. And the instruction at kp->addr is not modified by kprobes
+ * except for the first byte, we can recover the original instruction
+ * from it and kp->opcode.
+ *
+ * In case of Kprobes using ftrace, we do not have a copy of
+ * the original instruction. In fact, the ftrace location might
+ * be modified at anytime and even could be in an inconsistent state.
+ * Fortunately, we know that the original code is the ideal 5-byte
+ * long NOP.
*/
- memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- buf[0] = kp->opcode;
+ memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ if (faddr)
+ memcpy(buf, ideal_nops[NOP_ATOMIC5], 5);
+ else
+ buf[0] = kp->opcode;
return (unsigned long)buf;
}
@@ -251,6 +272,7 @@
* Recover the probed instruction at addr for further analysis.
* Caller must lock kprobes by kprobe_mutex, or disable preemption
* for preventing to release referencing kprobes.
+ * Returns zero if the instruction can not get recovered.
*/
unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
{
@@ -285,6 +307,8 @@
* normally used, we just go through if there is no kprobe.
*/
__addr = recover_probed_instruction(buf, addr);
+ if (!__addr)
+ return 0;
kernel_insn_init(&insn, (void *)__addr, MAX_INSN_SIZE);
insn_get_length(&insn);
@@ -333,6 +357,8 @@
unsigned long recovered_insn =
recover_probed_instruction(buf, (unsigned long)src);
+ if (!recovered_insn)
+ return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
/* Another subsystem puts a breakpoint, failed to recover */
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 0dd8d08..7b3b9d1 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -259,6 +259,8 @@
*/
return 0;
recovered_insn = recover_probed_instruction(buf, addr);
+ if (!recovered_insn)
+ return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
/* Another subsystem puts a breakpoint */
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 4a0890f..08f41ca 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -1,6 +1,6 @@
config LGUEST_GUEST
bool "Lguest guest support"
- depends on X86_32 && PARAVIRT
+ depends on X86_32 && PARAVIRT && PCI
select TTY
select VIRTUALIZATION
select VIRTIO
@@ -8,7 +8,7 @@
help
Lguest is a tiny in-kernel hypervisor. Selecting this will
allow your kernel to boot under lguest. This option will increase
- your kernel size by about 6k. If in doubt, say N.
+ your kernel size by about 10k. If in doubt, say N.
If you say Y here, make sure you say Y (or M) to the virtio block
and net drivers which lguest needs.
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 1bbedc4..3005f0c 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -130,7 +130,7 @@
intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip]();
else {
intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL]();
- pr_info("ARCH: Uknown SoC, assuming PENWELL!\n");
+ pr_info("ARCH: Unknown SoC, assuming PENWELL!\n");
}
out:
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bd8b845..5240f56 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1070,6 +1070,23 @@
BUG_ON(val);
}
#endif
+
+static u64 xen_read_msr_safe(unsigned int msr, int *err)
+{
+ u64 val;
+
+ val = native_read_msr_safe(msr, err);
+ switch (msr) {
+ case MSR_IA32_APICBASE:
+#ifdef CONFIG_X86_X2APIC
+ if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
+#endif
+ val &= ~X2APIC_ENABLE;
+ break;
+ }
+ return val;
+}
+
static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
{
int ret;
@@ -1240,7 +1257,7 @@
.wbinvd = native_wbinvd,
- .read_msr = native_read_msr_safe,
+ .read_msr = xen_read_msr_safe,
.write_msr = xen_write_msr_safe,
.read_tsc = native_read_tsc,
@@ -1741,6 +1758,7 @@
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
+ cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index b64bccb..ceb32dd 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -482,6 +482,7 @@
}
}
+#ifdef CONFIG_BLK_DEV_INTEGRITY
static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi)
{
if (be32_to_cpu(pi->ref_tag) == v)
@@ -538,6 +539,58 @@
kunmap_atomic(pmap);
}
+static int nvme_noop_verify(struct blk_integrity_iter *iter)
+{
+ return 0;
+}
+
+static int nvme_noop_generate(struct blk_integrity_iter *iter)
+{
+ return 0;
+}
+
+struct blk_integrity nvme_meta_noop = {
+ .name = "NVME_META_NOOP",
+ .generate_fn = nvme_noop_generate,
+ .verify_fn = nvme_noop_verify,
+};
+
+static void nvme_init_integrity(struct nvme_ns *ns)
+{
+ struct blk_integrity integrity;
+
+ switch (ns->pi_type) {
+ case NVME_NS_DPS_PI_TYPE3:
+ integrity = t10_pi_type3_crc;
+ break;
+ case NVME_NS_DPS_PI_TYPE1:
+ case NVME_NS_DPS_PI_TYPE2:
+ integrity = t10_pi_type1_crc;
+ break;
+ default:
+ integrity = nvme_meta_noop;
+ break;
+ }
+ integrity.tuple_size = ns->ms;
+ blk_integrity_register(ns->disk, &integrity);
+ blk_queue_max_integrity_segments(ns->queue, 1);
+}
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+static void nvme_dif_remap(struct request *req,
+ void (*dif_swap)(u32 p, u32 v, struct t10_pi_tuple *pi))
+{
+}
+static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi)
+{
+}
+static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi)
+{
+}
+static void nvme_init_integrity(struct nvme_ns *ns)
+{
+}
+#endif
+
static void req_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
@@ -1959,43 +2012,6 @@
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, ns->queue);
}
-static int nvme_noop_verify(struct blk_integrity_iter *iter)
-{
- return 0;
-}
-
-static int nvme_noop_generate(struct blk_integrity_iter *iter)
-{
- return 0;
-}
-
-struct blk_integrity nvme_meta_noop = {
- .name = "NVME_META_NOOP",
- .generate_fn = nvme_noop_generate,
- .verify_fn = nvme_noop_verify,
-};
-
-static void nvme_init_integrity(struct nvme_ns *ns)
-{
- struct blk_integrity integrity;
-
- switch (ns->pi_type) {
- case NVME_NS_DPS_PI_TYPE3:
- integrity = t10_pi_type3_crc;
- break;
- case NVME_NS_DPS_PI_TYPE1:
- case NVME_NS_DPS_PI_TYPE2:
- integrity = t10_pi_type1_crc;
- break;
- default:
- integrity = nvme_meta_noop;
- break;
- }
- integrity.tuple_size = ns->ms;
- blk_integrity_register(ns->disk, &integrity);
- blk_queue_max_integrity_segments(ns->queue, 1);
-}
-
static int nvme_revalidate_disk(struct gendisk *disk)
{
struct nvme_ns *ns = disk->private_data;
@@ -2036,7 +2052,8 @@
pi_type = ns->ms == sizeof(struct t10_pi_tuple) ?
id->dps & NVME_NS_DPS_PI_MASK : 0;
- if (disk->integrity && (ns->pi_type != pi_type || ns->ms != old_ms ||
+ if (blk_get_integrity(disk) && (ns->pi_type != pi_type ||
+ ns->ms != old_ms ||
bs != queue_logical_block_size(disk->queue) ||
(ns->ms && id->flbas & NVME_NS_FLBAS_META_EXT)))
blk_integrity_unregister(disk);
@@ -2044,11 +2061,11 @@
ns->pi_type = pi_type;
blk_queue_logical_block_size(ns->queue, bs);
- if (ns->ms && !disk->integrity && (disk->flags & GENHD_FL_UP) &&
+ if (ns->ms && !blk_get_integrity(disk) && (disk->flags & GENHD_FL_UP) &&
!(id->flbas & NVME_NS_FLBAS_META_EXT))
nvme_init_integrity(ns);
- if (id->ncap == 0 || (ns->ms && !disk->integrity))
+ if (id->ncap == 0 || (ns->ms && !blk_get_integrity(disk)))
set_capacity(disk, 0);
else
set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9));
@@ -2652,7 +2669,7 @@
list_for_each_entry(ns, &dev->namespaces, list) {
if (ns->disk->flags & GENHD_FL_UP) {
- if (ns->disk->integrity)
+ if (blk_get_integrity(ns->disk))
blk_integrity_unregister(ns->disk);
del_gendisk(ns->disk);
}
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 8e233ed..871bd35 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -528,7 +528,7 @@
static inline void update_used_max(struct zram *zram,
const unsigned long pages)
{
- int old_max, cur_max;
+ unsigned long old_max, cur_max;
old_max = atomic_long_read(&zram->stats.max_used_pages);
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 0958b69..e98d15e 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -142,7 +142,7 @@
&pdev->dev);
const struct imx_weim_devtype *devtype = of_id->data;
struct device_node *child;
- int ret;
+ int ret, have_child = 0;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@@ -155,14 +155,15 @@
continue;
ret = weim_timing_setup(child, base, devtype);
- if (ret) {
- dev_err(&pdev->dev, "%s set timing failed.\n",
+ if (ret)
+ dev_warn(&pdev->dev, "%s set timing failed.\n",
child->full_name);
- return ret;
- }
+ else
+ have_child = 1;
}
- ret = of_platform_populate(pdev->dev.of_node,
+ if (have_child)
+ ret = of_platform_populate(pdev->dev.of_node,
of_default_bus_match_table,
NULL, &pdev->dev);
if (ret)
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index 723ec06..9f18569 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -16,6 +16,7 @@
*
*/
+#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
@@ -23,6 +24,9 @@
#include <linux/of.h>
#include <linux/of_platform.h>
+#define OCP2SCP_TIMING 0x18
+#define SYNC2_MASK 0xf
+
static int ocp2scp_remove_devices(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -35,6 +39,9 @@
static int omap_ocp2scp_probe(struct platform_device *pdev)
{
int ret;
+ u32 reg;
+ void __iomem *regs;
+ struct resource *res;
struct device_node *np = pdev->dev.of_node;
if (np) {
@@ -47,6 +54,32 @@
}
pm_runtime_enable(&pdev->dev);
+ /*
+ * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
+ * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution;
+ * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf
+ * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution;
+ * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf
+ * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution;
+ * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249
+ * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution;
+ *
+ * Read path of OCP2SCP is not working properly due to low reset value
+ * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more.
+ */
+ if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(regs))
+ goto err0;
+
+ pm_runtime_get_sync(&pdev->dev);
+ reg = readl_relaxed(regs + OCP2SCP_TIMING);
+ reg &= ~(SYNC2_MASK);
+ reg |= 0x6;
+ writel_relaxed(reg, regs + OCP2SCP_TIMING);
+ pm_runtime_put_sync(&pdev->dev);
+ }
return 0;
@@ -67,6 +100,7 @@
#ifdef CONFIG_OF
static const struct of_device_id omap_ocp2scp_id_table[] = {
{ .compatible = "ti,omap-ocp2scp" },
+ { .compatible = "ti,am437x-ocp2scp" },
{}
};
MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 72d9727..49baf38 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -203,7 +203,7 @@
ad->control_reg = ti_clk_get_reg_addr(node, 0);
ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!ad->control_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->idlest_reg))
goto cleanup;
ad->idlest_mask = 0x1;
@@ -384,7 +384,8 @@
ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
- if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->autoidle_reg) ||
+ IS_ERR(ad->idlest_reg))
goto cleanup;
clk = clk_register(NULL, &clk_hw->hw);
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 8912ff8..e75c64c9 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -119,7 +119,7 @@
clk->name = node->name;
clk->reg = ti_clk_get_reg_addr(node, 0);
- if (!clk->reg) {
+ if (IS_ERR(clk->reg)) {
kfree(clk);
return -EINVAL;
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index e22b956..0ebe5c5 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -103,7 +103,8 @@
* @index: register index from the clock node
*
* Builds clock register address from device tree information. This
- * is a struct of type clk_omap_reg.
+ * is a struct of type clk_omap_reg. Returns a pointer to the register
+ * address, or a pointer error value in failure.
*/
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
{
@@ -121,14 +122,14 @@
if (i == CLK_MAX_MEMMAPS) {
pr_err("clk-provider not found for %s!\n", node->name);
- return NULL;
+ return ERR_PTR(-ENOENT);
}
reg->index = i;
if (of_property_read_u32_index(node, "reg", index, &val)) {
pr_err("%s must have reg[%d]!\n", node->name, index);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
reg->offset = val;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 6211893..ff5f117 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -530,8 +530,8 @@
u32 val;
*reg = ti_clk_get_reg_addr(node, 0);
- if (!*reg)
- return -EINVAL;
+ if (IS_ERR(*reg))
+ return PTR_ERR(*reg);
if (!of_property_read_u32(node, "ti,bit-shift", &val))
*shift = val;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 81dc469..11478a5 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -390,18 +390,18 @@
#endif
} else {
dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!dd->idlest_reg)
+ if (IS_ERR(dd->idlest_reg))
goto cleanup;
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
}
- if (!dd->control_reg || !dd->mult_div1_reg)
+ if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
goto cleanup;
if (dd->autoidle_mask) {
dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
- if (!dd->autoidle_reg)
+ if (IS_ERR(dd->autoidle_reg))
goto cleanup;
}
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index d493307..0c6fdfc 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -225,7 +225,7 @@
if (ops != &omap_gate_clkdm_clk_ops) {
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
@@ -264,7 +264,7 @@
return;
gate->enable_reg = ti_clk_get_reg_addr(node, 0);
- if (!gate->enable_reg)
+ if (IS_ERR(gate->enable_reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &val);
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 265d91f..c76230d 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -111,7 +111,7 @@
u32 val;
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 728e253..5cdeed5 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -210,7 +210,7 @@
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &shift);
@@ -283,7 +283,7 @@
mux->reg = ti_clk_get_reg_addr(node, 0);
- if (!mux->reg)
+ if (IS_ERR(mux->reg))
goto cleanup;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1c2506f..68161f7 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -63,6 +63,11 @@
config CADENCE_TTC_TIMER
bool
+config ASM9260_TIMER
+ bool
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -245,15 +250,4 @@
help
This enables OST0 support available on PXA and SA-11x0
platforms.
-
-config ASM9260_TIMER
- bool "Alphascale ASM9260 timer driver"
- depends on GENERIC_CLOCKEVENTS
- select CLKSRC_MMIO
- select CLKSRC_OF
- default y if MACH_ASM9260
- help
- This enables build of a clocksource and clockevent driver for
- the 32-bit System Timer hardware available on a Alphascale ASM9260.
-
endmenu
diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 32a3d25..68ab423 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -224,6 +224,8 @@
}
rate = clk_get_rate(clk);
+ mtk_timer_global_reset(evt);
+
if (request_irq(evt->dev.irq, mtk_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
pr_warn("failed to setup irq %d\n", evt->dev.irq);
@@ -232,8 +234,6 @@
evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
- mtk_timer_global_reset(evt);
-
/* Configure clock source */
mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
@@ -241,10 +241,11 @@
/* Configure clock event */
mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
- mtk_timer_enable_irq(evt, GPT_CLK_EVT);
-
clockevents_config_and_register(&evt->dev, rate, 0x3,
0xffffffff);
+
+ mtk_timer_enable_irq(evt, GPT_CLK_EVT);
+
return;
err_clk_disable:
diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index 941f3f3..d9438af 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -163,7 +163,7 @@
.dev_id = &ckevt_pxa_osmr0,
};
-static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
{
timer_writel(0, OIER);
timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 472fb5b..9cdbc0c 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -26,9 +26,12 @@
struct gpio_chip gpio_chip;
};
+#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip)
+
static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
int val;
val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
@@ -42,7 +45,8 @@
static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
int value)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
if (value)
tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
@@ -55,7 +59,8 @@
static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
int value)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
/* Set the initial value */
tps65912_gpio_set(gc, offset, value);
@@ -66,7 +71,8 @@
static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
GPIO_CFG_MASK);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 8cad8e4..4650bf8 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -46,12 +46,13 @@
ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
if (ret < 0) {
- /* We've found the gpio chip, but the translation failed.
- * Return true to stop looking and return the translation
- * error via out_gpio
+ /* We've found a gpio chip, but the translation failed.
+ * Store translation error in out_gpio.
+ * Return false to keep looking, as more than one gpio chip
+ * could be registered per of-node.
*/
gg_data->out_gpio = ERR_PTR(ret);
- return true;
+ return false;
}
gg_data->out_gpio = gpiochip_get_desc(gc, ret);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index b3589d0..910ff8a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -62,12 +62,18 @@
return KFD_MQD_TYPE_CP;
}
-static inline unsigned int get_first_pipe(struct device_queue_manager *dqm)
+unsigned int get_first_pipe(struct device_queue_manager *dqm)
{
- BUG_ON(!dqm);
+ BUG_ON(!dqm || !dqm->dev);
return dqm->dev->shared_resources.first_compute_pipe;
}
+unsigned int get_pipes_num(struct device_queue_manager *dqm)
+{
+ BUG_ON(!dqm || !dqm->dev);
+ return dqm->dev->shared_resources.compute_pipe_count;
+}
+
static inline unsigned int get_pipes_num_cpsch(void)
{
return PIPE_PER_ME_CP_SCHEDULING;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index d64f86c..488f51d 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -163,6 +163,8 @@
struct qcm_process_device *qpd);
int init_pipelines(struct device_queue_manager *dqm,
unsigned int pipes_num, unsigned int first_pipe);
+unsigned int get_first_pipe(struct device_queue_manager *dqm);
+unsigned int get_pipes_num(struct device_queue_manager *dqm);
extern inline unsigned int get_sh_mem_bases_32(struct kfd_process_device *pdd)
{
@@ -175,10 +177,4 @@
return (pdd->lds_base >> 60) & 0x0E;
}
-extern inline unsigned int get_pipes_num(struct device_queue_manager *dqm)
-{
- BUG_ON(!dqm || !dqm->dev);
- return dqm->dev->shared_resources.compute_pipe_count;
-}
-
#endif /* KFD_DEVICE_QUEUE_MANAGER_H_ */
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
index 6b07246..5469efe 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
@@ -131,5 +131,5 @@
static int initialize_cpsch_cik(struct device_queue_manager *dqm)
{
- return init_pipelines(dqm, get_pipes_num(dqm), 0);
+ return init_pipelines(dqm, get_pipes_num(dqm), get_first_pipe(dqm));
}
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 0409b90..b3e3068 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -153,7 +153,7 @@
(adj->crtc_hdisplay - 1) |
((adj->crtc_vdisplay - 1) << 16));
- cfg = ATMEL_HLCDC_CLKPOL;
+ cfg = 0;
prate = clk_get_rate(crtc->dc->hlcdc->sys_clk);
mode_rate = mode->crtc_clock * 1000;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 7320a6c..c1cb174 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -311,8 +311,6 @@
pm_runtime_enable(dev->dev);
- pm_runtime_put_sync(dev->dev);
-
ret = atmel_hlcdc_dc_modeset_init(dev);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize mode setting\n");
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
index 063d2a7..e79bd9b 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
@@ -311,7 +311,8 @@
/* Disable the layer */
regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST);
+ ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q |
+ ATMEL_HLCDC_LAYER_UPDATE);
/* Clear all pending interrupts */
regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 6b00173..6b6b07f 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2127,7 +2127,6 @@
DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id);
mutex_lock(&dev->mode_config.mutex);
- drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
connector = drm_connector_find(dev, out_resp->connector_id);
if (!connector) {
@@ -2157,6 +2156,8 @@
out_resp->mm_height = connector->display_info.height_mm;
out_resp->subpixel = connector->display_info.subpixel_order;
out_resp->connection = connector->status;
+
+ drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
encoder = drm_connector_get_encoder(connector);
if (encoder)
out_resp->encoder_id = encoder->base.id;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f2a825e..8727086 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2114,6 +2114,9 @@
* number comparisons on buffer last_read|write_seqno. It also allows an
* emission time to be associated with the request for tracking how far ahead
* of the GPU the submission is.
+ *
+ * The requests are reference counted, so upon creation they should have an
+ * initial reference taken using kref_init
*/
struct drm_i915_gem_request {
struct kref ref;
@@ -2137,7 +2140,16 @@
/** Position in the ringbuffer of the end of the whole request */
u32 tail;
- /** Context related to this request */
+ /**
+ * Context related to this request
+ * Contexts are refcounted, so when this request is associated with a
+ * context, we must increment the context's refcount, to guarantee that
+ * it persists while any request is linked to it. Requests themselves
+ * are also refcounted, so the request will only be freed when the last
+ * reference to it is dismissed, and the code in
+ * i915_gem_request_free() will then decrement the refcount on the
+ * context.
+ */
struct intel_context *ctx;
/** Batch buffer related to this request if any */
@@ -2374,6 +2386,7 @@
(INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
#define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \
((INTEL_DEVID(dev) & 0xf) == 0x6 || \
+ (INTEL_DEVID(dev) & 0xf) == 0xb || \
(INTEL_DEVID(dev) & 0xf) == 0xe))
#define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \
(INTEL_DEVID(dev) & 0x00F0) == 0x0020)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index c26d36c..e5daad5 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2659,8 +2659,7 @@
if (submit_req->ctx != ring->default_context)
intel_lr_context_unpin(ring, submit_req->ctx);
- i915_gem_context_unreference(submit_req->ctx);
- kfree(submit_req);
+ i915_gem_request_unreference(submit_req);
}
/*
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index a204584..9c6f93e 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -485,10 +485,8 @@
stolen_offset, gtt_offset, size);
/* KISS and expect everything to be page-aligned */
- BUG_ON(stolen_offset & 4095);
- BUG_ON(size & 4095);
-
- if (WARN_ON(size == 0))
+ if (WARN_ON(size == 0) || WARN_ON(size & 4095) ||
+ WARN_ON(stolen_offset & 4095))
return NULL;
stolen = kzalloc(sizeof(*stolen), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 7a24bd1..6377b22 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -335,9 +335,10 @@
return -EINVAL;
}
+ mutex_lock(&dev->struct_mutex);
if (i915_gem_obj_is_pinned(obj) || obj->framebuffer_references) {
- drm_gem_object_unreference_unlocked(&obj->base);
- return -EBUSY;
+ ret = -EBUSY;
+ goto err;
}
if (args->tiling_mode == I915_TILING_NONE) {
@@ -369,7 +370,6 @@
}
}
- mutex_lock(&dev->struct_mutex);
if (args->tiling_mode != obj->tiling_mode ||
args->stride != obj->stride) {
/* We need to rebind the object if its current allocation
@@ -424,6 +424,7 @@
obj->bit_17 = NULL;
}
+err:
drm_gem_object_unreference(&obj->base);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4145d95..ede5bbb 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1892,6 +1892,9 @@
u32 iir, gt_iir, pm_iir;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
while (true) {
/* Find, clear, then process each source of interrupt */
@@ -1936,6 +1939,9 @@
u32 master_ctl, iir;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
for (;;) {
master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL;
iir = I915_READ(VLV_IIR);
@@ -2208,6 +2214,9 @@
u32 de_iir, gt_iir, de_ier, sde_ier = 0;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
/* We get interrupts on unclaimed registers, so check for this before we
* do any I915_{READ,WRITE}. */
intel_uncore_check_errors(dev);
@@ -2279,6 +2288,9 @@
enum pipe pipe;
u32 aux_mask = GEN8_AUX_CHANNEL_A;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
if (IS_GEN9(dev))
aux_mask |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C |
GEN9_AUX_CHANNEL_D;
@@ -3771,6 +3783,9 @@
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ16(IIR);
if (iir == 0)
return IRQ_NONE;
@@ -3951,6 +3966,9 @@
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
int pipe, ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ(IIR);
do {
bool irq_received = (iir & ~flip_mask) != 0;
@@ -4171,6 +4189,9 @@
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ(IIR);
for (;;) {
@@ -4520,6 +4541,7 @@
{
dev_priv->dev->driver->irq_uninstall(dev_priv->dev);
dev_priv->pm.irqs_enabled = false;
+ synchronize_irq(dev_priv->dev->irq);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3d220a6..e730789 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2371,13 +2371,19 @@
struct drm_device *dev = crtc->base.dev;
struct drm_i915_gem_object *obj = NULL;
struct drm_mode_fb_cmd2 mode_cmd = { 0 };
- u32 base = plane_config->base;
+ u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
+ u32 size_aligned = round_up(plane_config->base + plane_config->size,
+ PAGE_SIZE);
+
+ size_aligned -= base_aligned;
if (plane_config->size == 0)
return false;
- obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base,
- plane_config->size);
+ obj = i915_gem_object_create_stolen_for_preallocated(dev,
+ base_aligned,
+ base_aligned,
+ size_aligned);
if (!obj)
return false;
@@ -2725,10 +2731,19 @@
case DRM_FORMAT_XRGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
+ case DRM_FORMAT_ARGB8888:
+ plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+ plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ break;
case DRM_FORMAT_XBGR8888:
plane_ctl |= PLANE_CTL_ORDER_RGBX;
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
+ case DRM_FORMAT_ABGR8888:
+ plane_ctl |= PLANE_CTL_ORDER_RGBX;
+ plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+ plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ break;
case DRM_FORMAT_XRGB2101010:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
break;
@@ -6627,7 +6642,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), plane, fb->width, fb->height,
@@ -7664,7 +7679,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = ALIGN(fb->pitches[0] * aligned_height, PAGE_SIZE);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), fb->width, fb->height,
@@ -7755,7 +7770,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), fb->width, fb->height,
@@ -8698,6 +8713,7 @@
old->release_fb->funcs->destroy(old->release_fb);
goto fail;
}
+ crtc->primary->crtc = crtc;
/* let the connector get through one full cycle before testing */
intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -12182,9 +12198,6 @@
return -ENOMEM;
}
- if (fb == crtc->cursor->fb)
- return 0;
-
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
if (!INTEL_INFO(dev)->cursor_needs_physical && obj->tiling_mode) {
@@ -13096,6 +13109,9 @@
/* HP Chromebook 14 (Celeron 2955U) */
{ 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
+
+ /* Dell Chromebook 11 */
+ { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
};
static void intel_init_quirks(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 0f358c5..e8d3da9 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -503,18 +503,19 @@
* If there isn't a request associated with this submission,
* create one as a temporary holder.
*/
- WARN(1, "execlist context submission without request");
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
return -ENOMEM;
request->ring = ring;
request->ctx = to;
+ kref_init(&request->ref);
+ request->uniq = dev_priv->request_uniq++;
+ i915_gem_context_reference(request->ctx);
} else {
+ i915_gem_request_reference(request);
WARN_ON(to != request->ctx);
}
request->tail = tail;
- i915_gem_request_reference(request);
- i915_gem_context_reference(request->ctx);
intel_runtime_pm_get(dev_priv);
@@ -731,7 +732,6 @@
if (ctx_obj && (ctx != ring->default_context))
intel_lr_context_unpin(ring, ctx);
intel_runtime_pm_put(dev_priv);
- i915_gem_context_unreference(ctx);
list_del(&req->execlist_link);
i915_gem_request_unreference(req);
}
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 5bf825d..8d74de8 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -178,6 +178,13 @@
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
+ /* The atom implementation only supports writes with a max payload of
+ * 12 bytes since it uses 4 bits for the total count (header + payload)
+ * in the parameter space. The atom interface supports 16 byte
+ * payloads for reads. The hw itself supports up to 16 bytes of payload.
+ */
+ if (WARN_ON_ONCE(msg->size > 12))
+ return -E2BIG;
/* tx_size needs to be 4 even for bare address packets since the atom
* table needs the info in tx_buf[3].
*/
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 7c9df1e..7fe7b74 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -731,7 +731,9 @@
dig_connector = radeon_connector->con_priv;
if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
(dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) {
- if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
+ if (radeon_audio != 0 &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)) &&
+ ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
return ATOM_ENCODER_MODE_DP_AUDIO;
return ATOM_ENCODER_MODE_DP;
} else if (radeon_audio != 0) {
@@ -747,7 +749,9 @@
}
break;
case DRM_MODE_CONNECTOR_eDP:
- if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
+ if (radeon_audio != 0 &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)) &&
+ ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
return ATOM_ENCODER_MODE_DP_AUDIO;
return ATOM_ENCODER_MODE_DP;
case DRM_MODE_CONNECTOR_DVIA:
@@ -1720,8 +1724,10 @@
}
encoder_mode = atombios_get_encoder_mode(encoder);
- if (radeon_audio != 0 &&
- (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode)))
+ if (connector && (radeon_audio != 0) &&
+ ((encoder_mode == ATOM_ENCODER_MODE_HDMI) ||
+ (ENCODER_MODE_IS_DP(encoder_mode) &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)))))
radeon_audio_dpms(encoder, mode);
}
@@ -2136,6 +2142,7 @@
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
int encoder_mode;
radeon_encoder->pixel_clock = adjusted_mode->clock;
@@ -2164,8 +2171,10 @@
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
/* handled in dpms */
encoder_mode = atombios_get_encoder_mode(encoder);
- if (radeon_audio != 0 &&
- (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode)))
+ if (connector && (radeon_audio != 0) &&
+ ((encoder_mode == ATOM_ENCODER_MODE_HDMI) ||
+ (ENCODER_MODE_IS_DP(encoder_mode) &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)))))
radeon_audio_mode_set(encoder, adjusted_mode);
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index e6a4ba2..0c993da 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3613,6 +3613,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN);
@@ -7230,6 +7232,8 @@
WREG32(CP_ME2_PIPE3_INT_CNTL, 0);
/* grbm */
WREG32(GRBM_INT_CNTL, 0);
+ /* SRBM */
+ WREG32(SRBM_INT_CNTL, 0);
/* vline/vblank, etc. */
WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
@@ -8046,6 +8050,10 @@
break;
}
break;
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 03003f8..c648e19 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -482,6 +482,10 @@
#define SOFT_RESET_ORB (1 << 23)
#define SOFT_RESET_VCE (1 << 24)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define VM_L2_CNTL 0x1400
#define ENABLE_L2_CACHE (1 << 0)
#define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 78600f5..4c0e24b 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3253,6 +3253,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -4324,6 +4326,7 @@
tmp = RREG32(DMA_CNTL) & ~TRAP_ENABLE;
WREG32(DMA_CNTL, tmp);
WREG32(GRBM_INT_CNTL, 0);
+ WREG32(SRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
if (rdev->num_crtc >= 4) {
@@ -5066,6 +5069,10 @@
DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index ee83d2a..a8d1d52 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -1191,6 +1191,10 @@
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
/* display watermarks */
#define DC_LB_MEMORY_SPLIT 0x6b0c
#define PRIORITY_A_CNT 0x6b18
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 24242a7..dab00812 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -962,6 +962,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -1086,12 +1088,12 @@
if ((rdev->config.cayman.max_backends_per_se == 1) &&
(rdev->flags & RADEON_IS_IGP)) {
- if ((disabled_rb_mask & 3) == 1) {
- /* RB0 disabled, RB1 enabled */
- tmp = 0x11111111;
- } else {
+ if ((disabled_rb_mask & 3) == 2) {
/* RB1 disabled, RB0 enabled */
tmp = 0x00000000;
+ } else {
+ /* RB0 disabled, RB1 enabled */
+ tmp = 0x11111111;
}
} else {
tmp = gb_addr_config & NUM_PIPES_MASK;
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index ad71254..6b44580 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -82,6 +82,10 @@
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define SRBM_STATUS2 0x0EC4
#define DMA_BUSY (1 << 5)
#define DMA1_BUSY (1 << 6)
diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c
index 843b65f..fa21544 100644
--- a/drivers/gpu/drm/radeon/r600_dpm.c
+++ b/drivers/gpu/drm/radeon/r600_dpm.c
@@ -188,7 +188,7 @@
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
radeon_crtc = to_radeon_crtc(crtc);
if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
- vrefresh = radeon_crtc->hw_mode.vrefresh;
+ vrefresh = drm_mode_vrefresh(&radeon_crtc->hw_mode);
break;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index c830863..a579ed3 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -715,6 +715,7 @@
struct radeon_cs_chunk *ib_chunk = p->chunk_ib;
struct radeon_device *rdev = p->rdev;
uint32_t header;
+ int ret = 0, i;
if (idx >= ib_chunk->length_dw) {
DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
@@ -743,14 +744,25 @@
break;
default:
DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx);
- return -EINVAL;
+ ret = -EINVAL;
+ goto dump_ib;
}
if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) {
DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n",
pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw);
- return -EINVAL;
+ ret = -EINVAL;
+ goto dump_ib;
}
return 0;
+
+dump_ib:
+ for (i = 0; i < ib_chunk->length_dw; i++) {
+ if (i == idx)
+ printk("\t0x%08x <---\n", radeon_get_ib_value(p, i));
+ else
+ printk("\t0x%08x\n", radeon_get_ib_value(p, i));
+ }
+ return ret;
}
/**
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 6b670b0..3a29703 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -179,9 +179,12 @@
(rdev->pdev->subsystem_vendor == 0x1734) &&
(rdev->pdev->subsystem_device == 0x1107))
use_bl = false;
+/* Older PPC macs use on-GPU backlight controller */
+#ifndef CONFIG_PPC_PMAC
/* disable native backlight control on older asics */
else if (rdev->family < CHIP_R600)
use_bl = false;
+#endif
else
use_bl = true;
}
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 9f758d3..33cf410 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -852,6 +852,12 @@
single_display = false;
}
+ /* 120hz tends to be problematic even if they are under the
+ * vblank limit.
+ */
+ if (single_display && (r600_dpm_get_vrefresh(rdev) >= 120))
+ single_display = false;
+
/* certain older asics have a separare 3D performance state,
* so try that first if the user selected performance
*/
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 73107fe..bcf516a 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -3162,6 +3162,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 1);
+ WREG32(SRBM_INT_ACK, 1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -4699,12 +4701,6 @@
switch (pkt.type) {
case RADEON_PACKET_TYPE0:
dev_err(rdev->dev, "Packet0 not allowed!\n");
- for (i = 0; i < ib->length_dw; i++) {
- if (i == idx)
- printk("\t0x%08x <---\n", ib->ptr[i]);
- else
- printk("\t0x%08x\n", ib->ptr[i]);
- }
ret = -EINVAL;
break;
case RADEON_PACKET_TYPE2:
@@ -4736,8 +4732,15 @@
ret = -EINVAL;
break;
}
- if (ret)
+ if (ret) {
+ for (i = 0; i < ib->length_dw; i++) {
+ if (i == idx)
+ printk("\t0x%08x <---\n", ib->ptr[i]);
+ else
+ printk("\t0x%08x\n", ib->ptr[i]);
+ }
break;
+ }
} while (idx < ib->length_dw);
return ret;
@@ -5910,6 +5913,7 @@
tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp);
WREG32(GRBM_INT_CNTL, 0);
+ WREG32(SRBM_INT_CNTL, 0);
if (rdev->num_crtc >= 2) {
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
@@ -6609,6 +6613,10 @@
break;
}
break;
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index cbd91d2..c27118c 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -358,6 +358,10 @@
#define CC_SYS_RB_BACKEND_DISABLE 0xe80
#define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define SRBM_STATUS2 0x0EC4
#define DMA_BUSY (1 << 5)
#define DMA1_BUSY (1 << 6)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 3aaa84a..1a52522 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -997,8 +997,10 @@
crtc->state = NULL;
state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (state)
+ if (state) {
crtc->state = &state->base;
+ crtc->state->crtc = crtc;
+ }
}
static struct drm_crtc_state *
@@ -1012,6 +1014,7 @@
return NULL;
copy->base.mode_changed = false;
+ copy->base.active_changed = false;
copy->base.planes_changed = false;
copy->base.event = NULL;
@@ -1227,9 +1230,6 @@
/* program display mode */
tegra_dc_set_timings(dc, mode);
- if (dc->soc->supports_border_color)
- tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR);
-
/* interlacing isn't supported yet, so disable it */
if (dc->soc->supports_interlacing) {
value = tegra_dc_readl(dc, DC_DISP_INTERLACE_CONTROL);
@@ -1252,42 +1252,7 @@
static void tegra_crtc_prepare(struct drm_crtc *crtc)
{
- struct tegra_dc *dc = to_tegra_dc(crtc);
- unsigned int syncpt;
- unsigned long value;
-
drm_crtc_vblank_off(crtc);
-
- if (dc->pipe)
- syncpt = SYNCPT_VBLANK1;
- else
- syncpt = SYNCPT_VBLANK0;
-
- /* initialize display controller */
- tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL);
- tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
- WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
-
- /* initialize timer */
- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
- WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
- tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);
-
- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
- WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
- tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);
-
- value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
}
static void tegra_crtc_commit(struct drm_crtc *crtc)
@@ -1664,6 +1629,8 @@
struct tegra_drm *tegra = drm->dev_private;
struct drm_plane *primary = NULL;
struct drm_plane *cursor = NULL;
+ unsigned int syncpt;
+ u32 value;
int err;
if (tegra->domain) {
@@ -1730,6 +1697,40 @@
goto cleanup;
}
+ /* initialize display controller */
+ if (dc->pipe)
+ syncpt = SYNCPT_VBLANK1;
+ else
+ syncpt = SYNCPT_VBLANK0;
+
+ tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL);
+ tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
+ WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
+
+ /* initialize timer */
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
+ WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
+ tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);
+
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
+ WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
+ tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);
+
+ value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
+
+ if (dc->soc->supports_border_color)
+ tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR);
+
return 0;
cleanup:
diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index 7e06657..7eaaee74 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -851,6 +851,14 @@
h_back_porch = mode->htotal - mode->hsync_end;
h_front_porch = mode->hsync_start - mode->hdisplay;
+ err = clk_set_rate(hdmi->clk, pclk);
+ if (err < 0) {
+ dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n",
+ err);
+ }
+
+ DRM_DEBUG_KMS("HDMI clock rate: %lu Hz\n", clk_get_rate(hdmi->clk));
+
/* power up sequence */
value = tegra_hdmi_readl(hdmi, HDMI_NV_PDISP_SOR_PLL0);
value &= ~SOR_PLL_PDBG;
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index db4fb6e..7c669c3 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1872,6 +1872,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
@@ -1926,6 +1927,7 @@
#endif
#if IS_ENABLED(CONFIG_HID_SAITEK)
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 46edb4d..204312b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -654,6 +654,7 @@
#define USB_DEVICE_ID_MS_LK6K 0x00f9
#define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
#define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
+#define USB_DEVICE_ID_MS_NE7K 0x071d
#define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
#define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
#define USB_DEVICE_ID_MS_SURFACE_PRO_2 0x0799
@@ -802,6 +803,7 @@
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
#define USB_DEVICE_ID_SAITEK_PS1000 0x0621
+#define USB_DEVICE_ID_SAITEK_RAT7_OLD 0x0ccb
#define USB_DEVICE_ID_SAITEK_RAT7 0x0cd7
#define USB_DEVICE_ID_SAITEK_MMO7 0x0cd0
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index fbaea6e..af935eb 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -264,6 +264,8 @@
.driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP),
.driver_data = MS_ERGONOMY },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K),
+ .driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K),
.driver_data = MS_ERGONOMY | MS_RDESC },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
diff --git a/drivers/hid/hid-saitek.c b/drivers/hid/hid-saitek.c
index 5632c54..a014f21 100644
--- a/drivers/hid/hid-saitek.c
+++ b/drivers/hid/hid-saitek.c
@@ -177,6 +177,8 @@
static const struct hid_device_id saitek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000),
.driver_data = SAITEK_FIX_PS1000 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD),
+ .driver_data = SAITEK_RELEASE_MODE_RAT7 },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7),
.driver_data = SAITEK_RELEASE_MODE_RAT7 },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9),
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 6a58b6c..e54ce10 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -135,8 +135,9 @@
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
+ unsigned long flags;
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
(collection_index >=
@@ -145,10 +146,11 @@
callback->hsdev->end_collection_index)) {
*priv = callback->priv;
*hsdev = callback->hsdev;
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock,
+ flags);
return callback->usage_callback;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return NULL;
}
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 31e9d25..1896c01 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -804,7 +804,7 @@
#define DS4_REPORT_0x81_SIZE 7
#define SIXAXIS_REPORT_0xF2_SIZE 18
-static spinlock_t sony_dev_list_lock;
+static DEFINE_SPINLOCK(sony_dev_list_lock);
static LIST_HEAD(sony_device_list);
static DEFINE_IDA(sony_device_id_allocator);
@@ -1944,6 +1944,8 @@
return -ENOMEM;
}
+ spin_lock_init(&sc->lock);
+
sc->quirks = quirks;
hid_set_drvdata(hdev, sc);
sc->hdev = hdev;
@@ -2147,8 +2149,8 @@
{
dbg_hid("Sony:%s\n", __func__);
- ida_destroy(&sony_device_id_allocator);
hid_unregister_driver(&sony_driver);
+ ida_destroy(&sony_device_id_allocator);
}
module_init(sony_init);
module_exit(sony_exit);
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index d43e967..36053f3 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -370,7 +370,10 @@
static void i2c_hid_get_input(struct i2c_hid *ihid)
{
int ret, ret_size;
- int size = ihid->bufsize;
+ int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+
+ if (size > ihid->bufsize)
+ size = ihid->bufsize;
ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
if (ret != size) {
@@ -785,7 +788,7 @@
dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 1a65079..046351c 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -778,6 +778,11 @@
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4]));
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6]));
input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8]));
+ if ((data[2] & 0x07) | data[4] | data[5] | data[6] | data[7] | data[8] | data[9]) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
} else if (features->type == CINTIQ_HYBRID) {
/*
* Do not send hardware buttons under Android. They
@@ -2725,9 +2730,9 @@
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x32A =
- { "Wacom Cintiq 27QHD", 119740, 67520, 2047,
- 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
- WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+ { "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63,
+ WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x32B =
{ "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index bce4e9f..6c99ee7 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -147,6 +147,9 @@
&ads2830_regmap_config);
}
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
data->cmd_byte = ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3;
if (!diff_input)
data->cmd_byte |= ADS7828_CMD_SD_SE;
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 42965d2..9176c76 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -37,6 +37,7 @@
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
+obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
diff --git a/drivers/irqchip/irq-vf610-mscm-ir.c b/drivers/irqchip/irq-vf610-mscm-ir.c
new file mode 100644
index 0000000..9521057
--- /dev/null
+++ b/drivers/irqchip/irq-vf610-mscm-ir.c
@@ -0,0 +1,212 @@
+/*
+ * Copyright (C) 2014-2015 Toradex AG
+ * Author: Stefan Agner <stefan@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * IRQ chip driver for MSCM interrupt router available on Vybrid SoC's.
+ * The interrupt router is between the CPU's interrupt controller and the
+ * peripheral. The router allows to route the peripheral interrupts to
+ * one of the two available CPU's on Vybrid VF6xx SoC's (Cortex-A5 or
+ * Cortex-M4). The router will be configured transparently on a IRQ
+ * request.
+ *
+ * o All peripheral interrupts of the Vybrid SoC can be routed to
+ * CPU 0, CPU 1 or both. The routing is useful for dual-core
+ * variants of Vybrid SoC such as VF6xx. This driver routes the
+ * requested interrupt to the CPU currently running on.
+ *
+ * o It is required to setup the interrupt router even on single-core
+ * variants of Vybrid.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "irqchip.h"
+
+#define MSCM_CPxNUM 0x4
+
+#define MSCM_IRSPRC(n) (0x80 + 2 * (n))
+#define MSCM_IRSPRC_CPEN_MASK 0x3
+
+#define MSCM_IRSPRC_NUM 112
+
+struct vf610_mscm_ir_chip_data {
+ void __iomem *mscm_ir_base;
+ u16 cpu_mask;
+ u16 saved_irsprc[MSCM_IRSPRC_NUM];
+};
+
+static struct vf610_mscm_ir_chip_data *mscm_ir_data;
+
+static inline void vf610_mscm_ir_save(struct vf610_mscm_ir_chip_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+ data->saved_irsprc[i] = readw_relaxed(data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static inline void vf610_mscm_ir_restore(struct vf610_mscm_ir_chip_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+ writew_relaxed(data->saved_irsprc[i], data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static int vf610_mscm_ir_notifier(struct notifier_block *self,
+ unsigned long cmd, void *v)
+{
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ vf610_mscm_ir_save(mscm_ir_data);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ vf610_mscm_ir_restore(mscm_ir_data);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mscm_ir_notifier_block = {
+ .notifier_call = vf610_mscm_ir_notifier,
+};
+
+static void vf610_mscm_ir_enable(struct irq_data *data)
+{
+ irq_hw_number_t hwirq = data->hwirq;
+ struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+ u16 irsprc;
+
+ irsprc = readw_relaxed(chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+ irsprc &= MSCM_IRSPRC_CPEN_MASK;
+
+ WARN_ON(irsprc & ~chip_data->cpu_mask);
+
+ writew_relaxed(chip_data->cpu_mask,
+ chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+ irq_chip_unmask_parent(data);
+}
+
+static void vf610_mscm_ir_disable(struct irq_data *data)
+{
+ irq_hw_number_t hwirq = data->hwirq;
+ struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+
+ writew_relaxed(0x0, chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+ irq_chip_mask_parent(data);
+}
+
+static struct irq_chip vf610_mscm_ir_irq_chip = {
+ .name = "mscm-ir",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_enable = vf610_mscm_ir_enable,
+ .irq_disable = vf610_mscm_ir_disable,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+};
+
+static int vf610_mscm_ir_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i;
+ irq_hw_number_t hwirq;
+ struct of_phandle_args *irq_data = arg;
+ struct of_phandle_args gic_data;
+
+ if (irq_data->args_count != 2)
+ return -EINVAL;
+
+ hwirq = irq_data->args[0];
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &vf610_mscm_ir_irq_chip,
+ domain->host_data);
+
+ gic_data.np = domain->parent->of_node;
+ gic_data.args_count = 3;
+ gic_data.args[0] = GIC_SPI;
+ gic_data.args[1] = irq_data->args[0];
+ gic_data.args[2] = irq_data->args[1];
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_data);
+}
+
+static const struct irq_domain_ops mscm_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .alloc = vf610_mscm_ir_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init vf610_mscm_ir_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *domain_parent;
+ struct regmap *mscm_cp_regmap;
+ int ret, cpuid;
+
+ domain_parent = irq_find_host(parent);
+ if (!domain_parent) {
+ pr_err("vf610_mscm_ir: interrupt-parent not found\n");
+ return -EINVAL;
+ }
+
+ mscm_ir_data = kzalloc(sizeof(*mscm_ir_data), GFP_KERNEL);
+ if (!mscm_ir_data)
+ return -ENOMEM;
+
+ mscm_ir_data->mscm_ir_base = of_io_request_and_map(node, 0, "mscm-ir");
+
+ if (!mscm_ir_data->mscm_ir_base) {
+ pr_err("vf610_mscm_ir: unable to map mscm register\n");
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ mscm_cp_regmap = syscon_regmap_lookup_by_phandle(node, "fsl,cpucfg");
+ if (IS_ERR(mscm_cp_regmap)) {
+ ret = PTR_ERR(mscm_cp_regmap);
+ pr_err("vf610_mscm_ir: regmap lookup for cpucfg failed\n");
+ goto out_unmap;
+ }
+
+ regmap_read(mscm_cp_regmap, MSCM_CPxNUM, &cpuid);
+ mscm_ir_data->cpu_mask = 0x1 << cpuid;
+
+ domain = irq_domain_add_hierarchy(domain_parent, 0,
+ MSCM_IRSPRC_NUM, node,
+ &mscm_irq_domain_ops, mscm_ir_data);
+ if (!domain) {
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+
+ cpu_pm_register_notifier(&mscm_ir_notifier_block);
+
+ return 0;
+
+out_unmap:
+ iounmap(mscm_ir_data->mscm_ir_base);
+out_free:
+ kfree(mscm_ir_data);
+ return ret;
+}
+IRQCHIP_DECLARE(vf610_mscm_ir, "fsl,vf610-mscm-ir", vf610_mscm_ir_of_init);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c8d2bac..cadf9cc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2555,7 +2555,7 @@
return err ? err : len;
}
static struct rdev_sysfs_entry rdev_state =
-__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
+__ATTR_PREALLOC(state, S_IRUGO|S_IWUSR, state_show, state_store);
static ssize_t
errors_show(struct md_rdev *rdev, char *page)
@@ -3638,7 +3638,8 @@
return err ?: len;
}
static struct md_sysfs_entry md_resync_start =
-__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
+__ATTR_PREALLOC(resync_start, S_IRUGO|S_IWUSR,
+ resync_start_show, resync_start_store);
/*
* The array state can be:
@@ -3851,7 +3852,7 @@
return err ?: len;
}
static struct md_sysfs_entry md_array_state =
-__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
+__ATTR_PREALLOC(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
static ssize_t
max_corrected_read_errors_show(struct mddev *mddev, char *page) {
@@ -4101,7 +4102,7 @@
}
static struct md_sysfs_entry md_metadata =
-__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
+__ATTR_PREALLOC(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
static ssize_t
action_show(struct mddev *mddev, char *page)
@@ -4189,7 +4190,7 @@
}
static struct md_sysfs_entry md_scan_mode =
-__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
+__ATTR_PREALLOC(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
static ssize_t
last_sync_action_show(struct mddev *mddev, char *page)
@@ -4335,7 +4336,8 @@
return sprintf(page, "%llu / %llu\n", resync, max_sectors);
}
-static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
+static struct md_sysfs_entry md_sync_completed =
+ __ATTR_PREALLOC(sync_completed, S_IRUGO, sync_completed_show, NULL);
static ssize_t
min_sync_show(struct mddev *mddev, char *page)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 4153da5..d34e238 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -560,7 +560,7 @@
if (test_bit(WriteMostly, &rdev->flags)) {
/* Don't balance among write-mostly, just
* use the first as a last resort */
- if (best_disk < 0) {
+ if (best_dist_disk < 0) {
if (is_badblock(rdev, this_sector, sectors,
&first_bad, &bad_sectors)) {
if (first_bad < this_sector)
@@ -569,7 +569,8 @@
best_good_sectors = first_bad - this_sector;
} else
best_good_sectors = sectors;
- best_disk = disk;
+ best_dist_disk = disk;
+ best_pending_disk = disk;
}
continue;
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e75d48c..cd2f96b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5121,12 +5121,17 @@
schedule_timeout_uninterruptible(1);
}
/* Need to check if array will still be degraded after recovery/resync
- * We don't need to check the 'failed' flag as when that gets set,
- * recovery aborts.
+ * Note in case of > 1 drive failures it's possible we're rebuilding
+ * one drive while leaving another faulty drive in array.
*/
- for (i = 0; i < conf->raid_disks; i++)
- if (conf->disks[i].rdev == NULL)
+ rcu_read_lock();
+ for (i = 0; i < conf->raid_disks; i++) {
+ struct md_rdev *rdev = ACCESS_ONCE(conf->disks[i].rdev);
+
+ if (rdev == NULL || test_bit(Faulty, &rdev->flags))
still_degraded = 1;
+ }
+ rcu_read_unlock();
bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 8c3bfcb..803869c 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -399,21 +399,21 @@
* of this RTC chip. We check for it anyways in case support is
* added in the future.
*/
- if (unlikely((seconds >= 0xc0) && (seconds <= 0xff)))
+ if (unlikely(seconds >= 0xc0))
alrm->time.tm_sec = -1;
else
alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
RTC_SECS_BCD_MASK,
RTC_SECS_BIN_MASK);
- if (unlikely((minutes >= 0xc0) && (minutes <= 0xff)))
+ if (unlikely(minutes >= 0xc0))
alrm->time.tm_min = -1;
else
alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
RTC_MINS_BCD_MASK,
RTC_MINS_BIN_MASK);
- if (unlikely((hours >= 0xc0) && (hours <= 0xff)))
+ if (unlikely(hours >= 0xc0))
alrm->time.tm_hour = -1;
else
alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
@@ -472,13 +472,13 @@
* field, and we only support four fields. We put the support
* here anyways for the future.
*/
- if (unlikely((seconds >= 0xc0) && (seconds <= 0xff)))
+ if (unlikely(seconds >= 0xc0))
seconds = 0xff;
- if (unlikely((minutes >= 0xc0) && (minutes <= 0xff)))
+ if (unlikely(minutes >= 0xc0))
minutes = 0xff;
- if (unlikely((hours >= 0xc0) && (hours <= 0xff)))
+ if (unlikely(hours >= 0xc0))
hours = 0xff;
alrm->time.tm_mon = -1;
@@ -528,7 +528,6 @@
/* ----------------------------------------------------------------------- */
/* /dev/rtcX Interface functions */
-#ifdef CONFIG_RTC_INTF_DEV
/**
* ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
* @dev: pointer to device structure.
@@ -557,7 +556,6 @@
return 0;
}
-#endif
/* ----------------------------------------------------------------------- */
@@ -1612,7 +1610,7 @@
ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
/* Make sure we actually matched something. */
- if (!bcd_reg_info && !bin_reg_info)
+ if (!bcd_reg_info || !bin_reg_info)
return -EINVAL;
/* bcd_reg_info->reg == bin_reg_info->reg. */
@@ -1650,7 +1648,7 @@
return -EINVAL;
/* Make sure we actually matched something. */
- if (!bcd_reg_info && !bin_reg_info)
+ if (!bcd_reg_info || !bin_reg_info)
return -EINVAL;
/* Check for a valid range. */
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
index f3ee439d..cd4c293 100644
--- a/drivers/sh/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -81,7 +81,9 @@
if (!of_machine_is_compatible("renesas,emev2") &&
!of_machine_is_compatible("renesas,r7s72100") &&
!of_machine_is_compatible("renesas,r8a73a4") &&
+#ifndef CONFIG_PM_GENERIC_DOMAINS_OF
!of_machine_is_compatible("renesas,r8a7740") &&
+#endif
!of_machine_is_compatible("renesas,r8a7778") &&
!of_machine_is_compatible("renesas,r8a7779") &&
!of_machine_is_compatible("renesas,r8a7790") &&
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index 25d244c..031018e 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -262,13 +262,12 @@
result = acpi_parse_art(priv->adev->handle, &priv->art_count,
&priv->arts, true);
if (result)
- goto free_priv;
-
+ dev_dbg(&pdev->dev, "_ART table parsing error\n");
result = acpi_parse_trt(priv->adev->handle, &priv->trt_count,
&priv->trts, true);
if (result)
- goto free_art;
+ dev_dbg(&pdev->dev, "_TRT table parsing error\n");
platform_set_drvdata(pdev, priv);
@@ -281,7 +280,7 @@
&int3400_thermal_params, 0, 0);
if (IS_ERR(priv->thermal)) {
result = PTR_ERR(priv->thermal);
- goto free_trt;
+ goto free_art_trt;
}
priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add(
@@ -295,9 +294,8 @@
free_zone:
thermal_zone_device_unregister(priv->thermal);
-free_trt:
+free_art_trt:
kfree(priv->trts);
-free_art:
kfree(priv->arts);
free_priv:
kfree(priv);
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 6ceebd6..12623bc 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -688,6 +688,7 @@
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
{ X86_VENDOR_INTEL, 6, 0x4c},
+ { X86_VENDOR_INTEL, 6, 0x4d},
{ X86_VENDOR_INTEL, 6, 0x56},
{}
};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 2580a48..fe4e767 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -387,21 +387,9 @@
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq) {
- int ret;
-
/*
* platform has IRQ support.
* Then, driver uses common registers
- */
-
- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
- dev_name(dev), common);
- if (ret) {
- dev_err(dev, "irq request failed\n ");
- return ret;
- }
-
- /*
* rcar_has_irq_support() will be enabled
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
@@ -456,8 +444,16 @@
}
/* enable temperature comparation */
- if (irq)
+ if (irq) {
+ ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
+ dev_name(dev), common);
+ if (ret) {
+ dev_err(dev, "irq request failed\n ");
+ goto error_unregister;
+ }
+
rcar_thermal_common_write(common, ENR, enr_bits);
+ }
platform_set_drvdata(pdev, common);
@@ -467,9 +463,9 @@
error_unregister:
rcar_thermal_for_each_priv(priv, common) {
- thermal_zone_device_unregister(priv->zone);
if (rcar_has_irq_support(priv))
rcar_thermal_irq_disable(priv);
+ thermal_zone_device_unregister(priv->zone);
}
pm_runtime_put(dev);
@@ -485,9 +481,9 @@
struct rcar_thermal_priv *priv;
rcar_thermal_for_each_priv(priv, common) {
- thermal_zone_device_unregister(priv->zone);
if (rcar_has_irq_support(priv))
rcar_thermal_irq_disable(priv);
+ thermal_zone_device_unregister(priv->zone);
}
pm_runtime_put(dev);
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 933cd80..1fc54ab 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -918,34 +918,16 @@
}
static const struct of_device_id exynos_tmu_match[] = {
- {
- .compatible = "samsung,exynos3250-tmu",
- },
- {
- .compatible = "samsung,exynos4210-tmu",
- },
- {
- .compatible = "samsung,exynos4412-tmu",
- },
- {
- .compatible = "samsung,exynos5250-tmu",
- },
- {
- .compatible = "samsung,exynos5260-tmu",
- },
- {
- .compatible = "samsung,exynos5420-tmu",
- },
- {
- .compatible = "samsung,exynos5420-tmu-ext-triminfo",
- },
- {
- .compatible = "samsung,exynos5440-tmu",
- },
- {
- .compatible = "samsung,exynos7-tmu",
- },
- {},
+ { .compatible = "samsung,exynos3250-tmu", },
+ { .compatible = "samsung,exynos4210-tmu", },
+ { .compatible = "samsung,exynos4412-tmu", },
+ { .compatible = "samsung,exynos5250-tmu", },
+ { .compatible = "samsung,exynos5260-tmu", },
+ { .compatible = "samsung,exynos5420-tmu", },
+ { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
+ { .compatible = "samsung,exynos5440-tmu", },
+ { .compatible = "samsung,exynos7-tmu", },
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..62a5d44 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1402,7 +1402,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
int i;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 3fb054a..a38c175 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -429,7 +429,7 @@
data = ti_bandgap_get_sensor_data(bgp, id);
- if (data && data->cool_dev)
+ if (data)
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 2140398..2ccd359 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -2,7 +2,7 @@
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
endif
obj-$(CONFIG_X86) += fallback.o
-obj-y += grant-table.o features.o balloon.o manage.o
+obj-y += grant-table.o features.o balloon.o manage.o preempt.o
obj-y += events/
obj-y += xenbus/
diff --git a/drivers/xen/preempt.c b/drivers/xen/preempt.c
new file mode 100644
index 0000000..a1800c1
--- /dev/null
+++ b/drivers/xen/preempt.c
@@ -0,0 +1,44 @@
+/*
+ * Preemptible hypercalls
+ *
+ * Copyright (C) 2014 Citrix Systems R&D ltd.
+ *
+ * This source code is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <xen/xen-ops.h>
+
+#ifndef CONFIG_PREEMPT
+
+/*
+ * Some hypercalls issued by the toolstack can take many 10s of
+ * seconds. Allow tasks running hypercalls via the privcmd driver to
+ * be voluntarily preempted even if full kernel preemption is
+ * disabled.
+ *
+ * Such preemptible hypercalls are bracketed by
+ * xen_preemptible_hcall_begin() and xen_preemptible_hcall_end()
+ * calls.
+ */
+
+DEFINE_PER_CPU(bool, xen_in_preemptible_hcall);
+EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall);
+
+asmlinkage __visible void xen_maybe_preempt_hcall(void)
+{
+ if (unlikely(__this_cpu_read(xen_in_preemptible_hcall)
+ && should_resched())) {
+ /*
+ * Clear flag as we may be rescheduled on a different
+ * cpu.
+ */
+ __this_cpu_write(xen_in_preemptible_hcall, false);
+ _cond_resched();
+ __this_cpu_write(xen_in_preemptible_hcall, true);
+ }
+}
+#endif /* CONFIG_PREEMPT */
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index 569a13b..59ac71c 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -56,10 +56,12 @@
if (copy_from_user(&hypercall, udata, sizeof(hypercall)))
return -EFAULT;
+ xen_preemptible_hcall_begin();
ret = privcmd_call(hypercall.op,
hypercall.arg[0], hypercall.arg[1],
hypercall.arg[2], hypercall.arg[3],
hypercall.arg[4]);
+ xen_preemptible_hcall_end();
return ret;
}
diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index 61653a0..9faca6a 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -709,12 +709,11 @@
static int scsiback_do_cmd_fn(struct vscsibk_info *info)
{
struct vscsiif_back_ring *ring = &info->ring;
- struct vscsiif_request *ring_req;
+ struct vscsiif_request ring_req;
struct vscsibk_pend *pending_req;
RING_IDX rc, rp;
int err, more_to_do;
uint32_t result;
- uint8_t act;
rc = ring->req_cons;
rp = ring->sring->req_prod;
@@ -735,11 +734,10 @@
if (!pending_req)
return 1;
- ring_req = RING_GET_REQUEST(ring, rc);
+ ring_req = *RING_GET_REQUEST(ring, rc);
ring->req_cons = ++rc;
- act = ring_req->act;
- err = prepare_pending_reqs(info, ring_req, pending_req);
+ err = prepare_pending_reqs(info, &ring_req, pending_req);
if (err) {
switch (err) {
case -ENODEV:
@@ -755,9 +753,9 @@
return 1;
}
- switch (act) {
+ switch (ring_req.act) {
case VSCSIIF_ACT_SCSI_CDB:
- if (scsiback_gnttab_data_map(ring_req, pending_req)) {
+ if (scsiback_gnttab_data_map(&ring_req, pending_req)) {
scsiback_fast_flush_area(pending_req);
scsiback_do_resp_with_sense(NULL,
DRIVER_ERROR << 24, 0, pending_req);
@@ -768,7 +766,7 @@
break;
case VSCSIIF_ACT_SCSI_ABORT:
scsiback_device_action(pending_req, TMR_ABORT_TASK,
- ring_req->ref_rqid);
+ ring_req.ref_rqid);
break;
case VSCSIIF_ACT_SCSI_RESET:
scsiback_device_action(pending_req, TMR_LUN_RESET, 0);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index cd4d131..8222f6f 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4903,10 +4903,17 @@
static struct btrfs_bio *alloc_btrfs_bio(int total_stripes, int real_stripes)
{
struct btrfs_bio *bbio = kzalloc(
+ /* the size of the btrfs_bio */
sizeof(struct btrfs_bio) +
+ /* plus the variable array for the stripes */
sizeof(struct btrfs_bio_stripe) * (total_stripes) +
+ /* plus the variable array for the tgt dev */
sizeof(int) * (real_stripes) +
- sizeof(u64) * (real_stripes),
+ /*
+ * plus the raid_map, which includes both the tgt dev
+ * and the stripes
+ */
+ sizeof(u64) * (total_stripes),
GFP_NOFS);
if (!bbio)
return NULL;
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index b2e3ff3..ecdbae1 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -31,6 +31,8 @@
#include "alloc.h"
#include "dat.h"
+static void __nilfs_btree_init(struct nilfs_bmap *bmap);
+
static struct nilfs_btree_path *nilfs_btree_alloc_path(void)
{
struct nilfs_btree_path *path;
@@ -368,6 +370,34 @@
return ret;
}
+/**
+ * nilfs_btree_root_broken - verify consistency of btree root node
+ * @node: btree root node to be examined
+ * @ino: inode number
+ *
+ * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned.
+ */
+static int nilfs_btree_root_broken(const struct nilfs_btree_node *node,
+ unsigned long ino)
+{
+ int level, flags, nchildren;
+ int ret = 0;
+
+ level = nilfs_btree_node_get_level(node);
+ flags = nilfs_btree_node_get_flags(node);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+
+ if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
+ level > NILFS_BTREE_LEVEL_MAX ||
+ nchildren < 0 ||
+ nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
+ pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
+ ino, level, flags, nchildren);
+ ret = 1;
+ }
+ return ret;
+}
+
int nilfs_btree_broken_node_block(struct buffer_head *bh)
{
int ret;
@@ -1713,7 +1743,7 @@
/* convert and insert */
dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
- nilfs_btree_init(btree);
+ __nilfs_btree_init(btree);
if (nreq != NULL) {
nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
nilfs_bmap_commit_alloc_ptr(btree, nreq, dat);
@@ -2294,12 +2324,23 @@
.bop_gather_data = NULL,
};
-int nilfs_btree_init(struct nilfs_bmap *bmap)
+static void __nilfs_btree_init(struct nilfs_bmap *bmap)
{
bmap->b_ops = &nilfs_btree_ops;
bmap->b_nchildren_per_block =
NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
- return 0;
+}
+
+int nilfs_btree_init(struct nilfs_bmap *bmap)
+{
+ int ret = 0;
+
+ __nilfs_btree_init(bmap);
+
+ if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap),
+ bmap->b_inode->i_ino))
+ ret = -EIO;
+ return ret;
}
void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index ce615d1..a2e1cb8 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -397,7 +397,8 @@
xfs_zero_last_block(
struct xfs_inode *ip,
xfs_fsize_t offset,
- xfs_fsize_t isize)
+ xfs_fsize_t isize,
+ bool *did_zeroing)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t last_fsb = XFS_B_TO_FSBT(mp, isize);
@@ -425,6 +426,7 @@
zero_len = mp->m_sb.sb_blocksize - zero_offset;
if (isize + zero_len > offset)
zero_len = offset - isize;
+ *did_zeroing = true;
return xfs_iozero(ip, isize, zero_len);
}
@@ -443,7 +445,8 @@
xfs_zero_eof(
struct xfs_inode *ip,
xfs_off_t offset, /* starting I/O offset */
- xfs_fsize_t isize) /* current inode size */
+ xfs_fsize_t isize, /* current inode size */
+ bool *did_zeroing)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t start_zero_fsb;
@@ -465,7 +468,7 @@
* We only zero a part of that block so it is handled specially.
*/
if (XFS_B_FSB_OFFSET(mp, isize) != 0) {
- error = xfs_zero_last_block(ip, offset, isize);
+ error = xfs_zero_last_block(ip, offset, isize, did_zeroing);
if (error)
return error;
}
@@ -525,6 +528,7 @@
if (error)
return error;
+ *did_zeroing = true;
start_zero_fsb = imap.br_startoff + imap.br_blockcount;
ASSERT(start_zero_fsb <= (end_zero_fsb + 1));
}
@@ -567,13 +571,15 @@
* having to redo all checks before.
*/
if (*pos > i_size_read(inode)) {
+ bool zero = false;
+
if (*iolock == XFS_IOLOCK_SHARED) {
xfs_rw_iunlock(ip, *iolock);
*iolock = XFS_IOLOCK_EXCL;
xfs_rw_ilock(ip, *iolock);
goto restart;
}
- error = xfs_zero_eof(ip, *pos, i_size_read(inode));
+ error = xfs_zero_eof(ip, *pos, i_size_read(inode), &zero);
if (error)
return error;
}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index daafa1f..6163767 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2867,6 +2867,10 @@
* Handle RENAME_EXCHANGE flags
*/
if (flags & RENAME_EXCHANGE) {
+ if (target_ip == NULL) {
+ error = -EINVAL;
+ goto error_return;
+ }
error = xfs_cross_rename(tp, src_dp, src_name, src_ip,
target_dp, target_name, target_ip,
&free_list, &first_block, spaceres);
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 86cd6b3..a1cd55f 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -384,10 +384,11 @@
XFS_PREALLOC_INVISIBLE = (1 << 4),
};
-int xfs_update_prealloc_flags(struct xfs_inode *,
- enum xfs_prealloc_flags);
-int xfs_zero_eof(struct xfs_inode *, xfs_off_t, xfs_fsize_t);
-int xfs_iozero(struct xfs_inode *, loff_t, size_t);
+int xfs_update_prealloc_flags(struct xfs_inode *ip,
+ enum xfs_prealloc_flags flags);
+int xfs_zero_eof(struct xfs_inode *ip, xfs_off_t offset,
+ xfs_fsize_t isize, bool *did_zeroing);
+int xfs_iozero(struct xfs_inode *ip, loff_t pos, size_t count);
#define IHOLD(ip) \
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index d919ad7..e53a903 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -751,6 +751,7 @@
int error;
uint lock_flags = 0;
uint commit_flags = 0;
+ bool did_zeroing = false;
trace_xfs_setattr(ip);
@@ -794,20 +795,16 @@
return error;
/*
- * Now we can make the changes. Before we join the inode to the
- * transaction, take care of the part of the truncation that must be
- * done without the inode lock. This needs to be done before joining
- * the inode to the transaction, because the inode cannot be unlocked
- * once it is a part of the transaction.
+ * File data changes must be complete before we start the transaction to
+ * modify the inode. This needs to be done before joining the inode to
+ * the transaction because the inode cannot be unlocked once it is a
+ * part of the transaction.
+ *
+ * Start with zeroing any data block beyond EOF that we may expose on
+ * file extension.
*/
if (newsize > oldsize) {
- /*
- * Do the first part of growing a file: zero any data in the
- * last block that is beyond the old EOF. We need to do this
- * before the inode is joined to the transaction to modify
- * i_size.
- */
- error = xfs_zero_eof(ip, newsize, oldsize);
+ error = xfs_zero_eof(ip, newsize, oldsize, &did_zeroing);
if (error)
return error;
}
@@ -817,23 +814,18 @@
* any previous writes that are beyond the on disk EOF and the new
* EOF that have not been written out need to be written here. If we
* do not write the data out, we expose ourselves to the null files
- * problem.
- *
- * Only flush from the on disk size to the smaller of the in memory
- * file size or the new size as that's the range we really care about
- * here and prevents waiting for other data not within the range we
- * care about here.
+ * problem. Note that this includes any block zeroing we did above;
+ * otherwise those blocks may not be zeroed after a crash.
*/
- if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) {
+ if (newsize > ip->i_d.di_size &&
+ (oldsize != ip->i_d.di_size || did_zeroing)) {
error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
ip->i_d.di_size, newsize);
if (error)
return error;
}
- /*
- * Wait for all direct I/O to complete.
- */
+ /* Now wait for all direct I/O to complete. */
inode_dio_wait(inode);
/*
diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c
index 4b33ef1..365dd57 100644
--- a/fs/xfs/xfs_pnfs.c
+++ b/fs/xfs/xfs_pnfs.c
@@ -300,8 +300,10 @@
tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ichange, 0, 0);
- if (error)
+ if (error) {
+ xfs_trans_cancel(tp, 0);
goto out_drop_iolock;
+ }
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 53cc2aa..fbbb9e6 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -836,6 +836,11 @@
*/
xfs_dqcheck(mp, ddq, id+j, type, XFS_QMOPT_DQREPAIR,
"xfs_quotacheck");
+ /*
+ * Reset type in case we are reusing group quota file for
+ * project quotas or vice versa
+ */
+ ddq->d_flags = type;
ddq->d_bcount = 0;
ddq->d_icount = 0;
ddq->d_rtbcount = 0;
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index 180ad0e..d016dc5 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -214,9 +214,9 @@
INTEL_VGA_DEVICE((((gt) - 1) << 4) | (id), info)
#define _INTEL_BDW_M_IDS(gt, info) \
- _INTEL_BDW_M(gt, 0x1602, info), /* ULT */ \
+ _INTEL_BDW_M(gt, 0x1602, info), /* Halo */ \
_INTEL_BDW_M(gt, 0x1606, info), /* ULT */ \
- _INTEL_BDW_M(gt, 0x160B, info), /* Iris */ \
+ _INTEL_BDW_M(gt, 0x160B, info), /* ULT */ \
_INTEL_BDW_M(gt, 0x160E, info) /* ULX */
#define _INTEL_BDW_D_IDS(gt, info) \
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index b690cdb..8780868 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -248,6 +248,9 @@
#define IMX6QDL_PLL6_BYPASS 235
#define IMX6QDL_PLL7_BYPASS 236
#define IMX6QDL_CLK_GPT_3M 237
-#define IMX6QDL_CLK_END 238
+#define IMX6QDL_CLK_VIDEO_27M 238
+#define IMX6QDL_CLK_MIPI_CORE_CFG 239
+#define IMX6QDL_CLK_MIPI_IPG 240
+#define IMX6QDL_CLK_END 241
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/media/omap3-isp.h b/include/dt-bindings/media/omap3-isp.h
new file mode 100644
index 0000000..b18c60e
--- /dev/null
+++ b/include/dt-bindings/media/omap3-isp.h
@@ -0,0 +1,22 @@
+/*
+ * include/dt-bindings/media/omap3-isp.h
+ *
+ * Copyright (C) 2015 Sakari Ailus
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_OMAP3_ISP_H__
+#define __DT_BINDINGS_OMAP3_ISP_H__
+
+#define OMAP3ISP_PHY_TYPE_COMPLEX_IO 0
+#define OMAP3ISP_PHY_TYPE_CSIPHY 1
+
+#endif /* __DT_BINDINGS_OMAP3_ISP_H__ */
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6784400..79b76e1 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -215,14 +215,14 @@
.node_name = name, \
}
-/* Maximum number of clock memmaps */
-#define CLK_MAX_MEMMAPS 4
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
+ TI_CLKM_CM2,
TI_CLKM_PRM,
TI_CLKM_SCRM,
+ TI_CLKM_CTRL,
+ CLK_MAX_MEMMAPS
};
typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 51f7cca..4173a8f 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -33,6 +33,8 @@
* @units: Measurment unit for this attribute.
* @unit_expo: Exponent used in the data.
* @size: Size in bytes for data size.
+ * @logical_minimum: Logical minimum value for this attribute.
+ * @logical_maximum: Logical maximum value for this attribute.
*/
struct hid_sensor_hub_attribute_info {
u32 usage_id;
@@ -146,6 +148,7 @@
/**
* sensor_hub_input_attr_get_raw_value() - Synchronous read request
+* @hsdev: Hub device instance.
* @usage_id: Attribute usage id of parent physical device as per spec
* @attr_usage_id: Attribute usage id as per spec
* @report_id: Report id to look for
@@ -160,6 +163,7 @@
u32 attr_usage_id, u32 report_id);
/**
* sensor_hub_set_feature() - Feature set request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
* @value: Value to set
@@ -172,6 +176,7 @@
/**
* sensor_hub_get_feature() - Feature get request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
* @value: Place holder for return value
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index c877cad..d16f4c8 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -207,6 +207,7 @@
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6)
+#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4
#define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4)
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index fc52e30..5eac316 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -314,6 +314,8 @@
}
#endif
+
+#if IS_ENABLED(CONFIG_THERMAL)
struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
void *, struct thermal_zone_device_ops *,
const struct thermal_zone_params *, int, int);
@@ -340,8 +342,58 @@
struct thermal_cooling_device *, int);
void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
+#else
+static inline struct thermal_zone_device *thermal_zone_device_register(
+ const char *type, int trips, int mask, void *devdata,
+ struct thermal_zone_device_ops *ops,
+ const struct thermal_zone_params *tzp,
+ int passive_delay, int polling_delay)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_zone_device_unregister(
+ struct thermal_zone_device *tz)
+{ }
+static inline int thermal_zone_bind_cooling_device(
+ struct thermal_zone_device *tz, int trip,
+ struct thermal_cooling_device *cdev,
+ unsigned long upper, unsigned long lower)
+{ return -ENODEV; }
+static inline int thermal_zone_unbind_cooling_device(
+ struct thermal_zone_device *tz, int trip,
+ struct thermal_cooling_device *cdev)
+{ return -ENODEV; }
+static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
+{ }
+static inline struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{ return ERR_PTR(-ENODEV); }
+static inline struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+ char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_cooling_device_unregister(
+ struct thermal_cooling_device *cdev)
+{ }
+static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
+ const char *name)
+{ return ERR_PTR(-ENODEV); }
+static inline int thermal_zone_get_temp(
+ struct thermal_zone_device *tz, unsigned long *temp)
+{ return -ENODEV; }
+static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
+{ return -ENODEV; }
+static inline struct thermal_instance *
+get_thermal_instance(struct thermal_zone_device *tz,
+ struct thermal_cooling_device *cdev, int trip)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{ }
+static inline void thermal_notify_framework(struct thermal_zone_device *tz,
+ int trip)
+{ }
+#endif /* CONFIG_THERMAL */
-#ifdef CONFIG_NET
+#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event);
#else
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index 7491ee5..8333821 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -46,4 +46,30 @@
}
#endif
+#ifdef CONFIG_PREEMPT
+
+static inline void xen_preemptible_hcall_begin(void)
+{
+}
+
+static inline void xen_preemptible_hcall_end(void)
+{
+}
+
+#else
+
+DECLARE_PER_CPU(bool, xen_in_preemptible_hcall);
+
+static inline void xen_preemptible_hcall_begin(void)
+{
+ __this_cpu_write(xen_in_preemptible_hcall, true);
+}
+
+static inline void xen_preemptible_hcall_end(void)
+{
+ __this_cpu_write(xen_in_preemptible_hcall, false);
+}
+
+#endif /* CONFIG_PREEMPT */
+
#endif /* INCLUDE_XEN_OPS_H */
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index ff7f47d..782172f 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -314,12 +314,12 @@
rcu_read_lock();
func = list_first_or_null_rcu(&ops->func_stack, struct klp_func,
stack_node);
- rcu_read_unlock();
-
if (WARN_ON_ONCE(!func))
- return;
+ goto unlock;
klp_arch_set_pc(regs, (unsigned long)func->new_func);
+unlock:
+ rcu_read_unlock();
}
static int klp_disable_func(struct klp_func *func)
@@ -731,7 +731,7 @@
func->state = KLP_DISABLED;
return kobject_init_and_add(&func->kobj, &klp_ktype_func,
- obj->kobj, func->old_name);
+ obj->kobj, "%s", func->old_name);
}
/* parts of the initialization that is done only when the object is loaded */
@@ -807,7 +807,7 @@
patch->state = KLP_DISABLED;
ret = kobject_init_and_add(&patch->kobj, &klp_ktype_patch,
- klp_root_kobj, patch->mod->name);
+ klp_root_kobj, "%s", patch->mod->name);
if (ret)
goto unlock;
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index e16e554..6357265 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -1193,6 +1193,7 @@
ret = __rt_mutex_slowlock(lock, state, timeout, &waiter);
if (unlikely(ret)) {
+ __set_current_state(TASK_RUNNING);
if (rt_mutex_has_waiters(lock))
remove_waiter(lock, &waiter);
rt_mutex_handle_deadlock(ret, chwalk, &waiter);
diff --git a/kernel/sys.c b/kernel/sys.c
index 667b2e6..a03d9cd 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1108,6 +1108,7 @@
/*
* Work around broken programs that cannot handle "Linux 3.0".
* Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
+ * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60.
*/
static int override_release(char __user *release, size_t len)
{
@@ -1127,7 +1128,7 @@
break;
rest++;
}
- v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
+ v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60;
copy = clamp_t(size_t, len, 1, sizeof(buf));
copy = scnprintf(buf, copy, "2.6.%u%s", v, rest);
ret = copy_to_user(release, buf, copy + 1);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d18d3a6..9fe0769 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -5247,7 +5247,7 @@
unsigned long low = ACCESS_ONCE(memcg->low);
if (low == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)low * PAGE_SIZE);
@@ -5262,7 +5262,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &low);
+ err = page_counter_memparse(buf, "max", &low);
if (err)
return err;
@@ -5277,7 +5277,7 @@
unsigned long high = ACCESS_ONCE(memcg->high);
if (high == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)high * PAGE_SIZE);
@@ -5292,7 +5292,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &high);
+ err = page_counter_memparse(buf, "max", &high);
if (err)
return err;
@@ -5307,7 +5307,7 @@
unsigned long max = ACCESS_ONCE(memcg->memory.limit);
if (max == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)max * PAGE_SIZE);
@@ -5322,7 +5322,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &max);
+ err = page_counter_memparse(buf, "max", &max);
if (err)
return err;
@@ -5426,7 +5426,7 @@
if (memcg == root_mem_cgroup)
return false;
- if (page_counter_read(&memcg->memory) > memcg->low)
+ if (page_counter_read(&memcg->memory) >= memcg->low)
return false;
while (memcg != root) {
@@ -5435,7 +5435,7 @@
if (memcg == root_mem_cgroup)
break;
- if (page_counter_read(&memcg->memory) > memcg->low)
+ if (page_counter_read(&memcg->memory) >= memcg->low)
return false;
}
return true;
diff --git a/mm/nommu.c b/mm/nommu.c
index 7296360..3e67e75 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1213,11 +1213,9 @@
if (sysctl_nr_trim_pages && total - point >= sysctl_nr_trim_pages) {
total = point;
kdebug("try to alloc exact %lu pages", total);
- base = alloc_pages_exact(len, GFP_KERNEL);
- } else {
- base = (void *)__get_free_pages(GFP_KERNEL, order);
}
+ base = alloc_pages_exact(total << PAGE_SHIFT, GFP_KERNEL);
if (!base)
goto enomem;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a47f0b2..7abfa70 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2353,8 +2353,15 @@
if (ac->high_zoneidx < ZONE_NORMAL)
goto out;
/* The OOM killer does not compensate for light reclaim */
- if (!(gfp_mask & __GFP_FS))
+ if (!(gfp_mask & __GFP_FS)) {
+ /*
+ * XXX: Page reclaim didn't yield anything,
+ * and the OOM killer can't be invoked, but
+ * keep looping as per should_alloc_retry().
+ */
+ *did_some_progress = 1;
goto out;
+ }
/*
* GFP_THISNODE contains __GFP_NORETRY and we never hit this.
* Sanity check for bare calls of __GFP_THISNODE, not real OOM.
diff --git a/mm/shmem.c b/mm/shmem.c
index 2f17cb5..cf2d0ca 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1455,6 +1455,9 @@
bool shmem_mapping(struct address_space *mapping)
{
+ if (!mapping->host)
+ return false;
+
return mapping->host->i_sb->s_op == &shmem_ops;
}
diff --git a/scripts/gdb/linux/__init__.py b/scripts/gdb/linux/__init__.py
new file mode 100644
index 0000000..4680fb1
--- /dev/null
+++ b/scripts/gdb/linux/__init__.py
@@ -0,0 +1 @@
+# nothing to do for the initialization of this package
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b03a638..279e24f 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1552,6 +1552,8 @@
if (! snd_pcm_playback_empty(substream)) {
snd_pcm_do_start(substream, SNDRV_PCM_STATE_DRAINING);
snd_pcm_post_start(substream, SNDRV_PCM_STATE_DRAINING);
+ } else {
+ runtime->status->state = SNDRV_PCM_STATE_SETUP;
}
break;
case SNDRV_PCM_STATE_RUNNING:
diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c
index 0d58018..5cc356d 100644
--- a/sound/firewire/amdtp.c
+++ b/sound/firewire/amdtp.c
@@ -33,7 +33,7 @@
*/
#define MAX_MIDI_RX_BLOCKS 8
-#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 µs */
+#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 microseconds */
/* isochronous header parameters */
#define ISO_DATA_LENGTH_SHIFT 16
@@ -78,7 +78,7 @@
int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir, enum cip_flags flags)
{
- s->unit = fw_unit_get(unit);
+ s->unit = unit;
s->direction = dir;
s->flags = flags;
s->context = ERR_PTR(-1);
@@ -102,7 +102,6 @@
{
WARN_ON(amdtp_stream_running(s));
mutex_destroy(&s->mutex);
- fw_unit_put(s->unit);
}
EXPORT_SYMBOL(amdtp_stream_destroy);
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index fc19c99..611b7da 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -116,11 +116,22 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void
bebob_card_free(struct snd_card *card)
{
struct snd_bebob *bebob = card->private_data;
+ snd_bebob_stream_destroy_duplex(bebob);
+ fw_unit_put(bebob->unit);
+
+ kfree(bebob->maudio_special_quirk);
+
if (bebob->card_index >= 0) {
mutex_lock(&devices_mutex);
clear_bit(bebob->card_index, devices_used);
@@ -205,7 +216,7 @@
card->private_free = bebob_card_free;
bebob->card = card;
- bebob->unit = unit;
+ bebob->unit = fw_unit_get(unit);
bebob->spec = spec;
mutex_init(&bebob->mutex);
spin_lock_init(&bebob->lock);
@@ -306,10 +317,11 @@
if (bebob == NULL)
return;
- kfree(bebob->maudio_special_quirk);
+ /* Awake bus-reset waiters. */
+ if (!completion_done(&bebob->bus_reset))
+ complete_all(&bebob->bus_reset);
- snd_bebob_stream_destroy_duplex(bebob);
- snd_card_disconnect(bebob->card);
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(bebob->card);
}
diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c
index 0ebcabf..98e4fc8 100644
--- a/sound/firewire/bebob/bebob_stream.c
+++ b/sound/firewire/bebob/bebob_stream.c
@@ -410,8 +410,6 @@
static void
destroy_both_connections(struct snd_bebob *bebob)
{
- break_both_connections(bebob);
-
cmp_connection_destroy(&bebob->in_conn);
cmp_connection_destroy(&bebob->out_conn);
}
@@ -712,22 +710,16 @@
mutex_unlock(&bebob->mutex);
}
+/*
+ * This function should be called before starting streams or after stopping
+ * streams.
+ */
void snd_bebob_stream_destroy_duplex(struct snd_bebob *bebob)
{
- mutex_lock(&bebob->mutex);
-
- amdtp_stream_pcm_abort(&bebob->rx_stream);
- amdtp_stream_pcm_abort(&bebob->tx_stream);
-
- amdtp_stream_stop(&bebob->rx_stream);
- amdtp_stream_stop(&bebob->tx_stream);
-
amdtp_stream_destroy(&bebob->rx_stream);
amdtp_stream_destroy(&bebob->tx_stream);
destroy_both_connections(bebob);
-
- mutex_unlock(&bebob->mutex);
}
/*
diff --git a/sound/firewire/dice/dice-stream.c b/sound/firewire/dice/dice-stream.c
index fa9cf76..07dbd01 100644
--- a/sound/firewire/dice/dice-stream.c
+++ b/sound/firewire/dice/dice-stream.c
@@ -311,14 +311,21 @@
return err;
}
+/*
+ * This function should be called before starting streams or after stopping
+ * streams.
+ */
static void destroy_stream(struct snd_dice *dice, struct amdtp_stream *stream)
{
- amdtp_stream_destroy(stream);
+ struct fw_iso_resources *resources;
if (stream == &dice->tx_stream)
- fw_iso_resources_destroy(&dice->tx_resources);
+ resources = &dice->tx_resources;
else
- fw_iso_resources_destroy(&dice->rx_resources);
+ resources = &dice->rx_resources;
+
+ amdtp_stream_destroy(stream);
+ fw_iso_resources_destroy(resources);
}
int snd_dice_stream_init_duplex(struct snd_dice *dice)
@@ -332,6 +339,8 @@
goto end;
err = init_stream(dice, &dice->rx_stream);
+ if (err < 0)
+ destroy_stream(dice, &dice->tx_stream);
end:
return err;
}
@@ -340,10 +349,7 @@
{
snd_dice_transaction_clear_enable(dice);
- stop_stream(dice, &dice->tx_stream);
destroy_stream(dice, &dice->tx_stream);
-
- stop_stream(dice, &dice->rx_stream);
destroy_stream(dice, &dice->rx_stream);
dice->substreams_counter = 0;
diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
index 90d8f40..70a111d7f 100644
--- a/sound/firewire/dice/dice.c
+++ b/sound/firewire/dice/dice.c
@@ -226,11 +226,20 @@
strcpy(card->mixername, "DICE");
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void dice_card_free(struct snd_card *card)
{
struct snd_dice *dice = card->private_data;
+ snd_dice_stream_destroy_duplex(dice);
snd_dice_transaction_destroy(dice);
+ fw_unit_put(dice->unit);
+
mutex_destroy(&dice->mutex);
}
@@ -251,7 +260,7 @@
dice = card->private_data;
dice->card = card;
- dice->unit = unit;
+ dice->unit = fw_unit_get(unit);
card->private_free = dice_card_free;
spin_lock_init(&dice->lock);
@@ -305,10 +314,7 @@
{
struct snd_dice *dice = dev_get_drvdata(&unit->device);
- snd_card_disconnect(dice->card);
-
- snd_dice_stream_destroy_duplex(dice);
-
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(dice->card);
}
diff --git a/sound/firewire/fireworks/fireworks.c b/sound/firewire/fireworks/fireworks.c
index 3e2ed8e..2682e7e 100644
--- a/sound/firewire/fireworks/fireworks.c
+++ b/sound/firewire/fireworks/fireworks.c
@@ -173,11 +173,23 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void
efw_card_free(struct snd_card *card)
{
struct snd_efw *efw = card->private_data;
+ snd_efw_stream_destroy_duplex(efw);
+ snd_efw_transaction_remove_instance(efw);
+ fw_unit_put(efw->unit);
+
+ kfree(efw->resp_buf);
+
if (efw->card_index >= 0) {
mutex_lock(&devices_mutex);
clear_bit(efw->card_index, devices_used);
@@ -185,7 +197,6 @@
}
mutex_destroy(&efw->mutex);
- kfree(efw->resp_buf);
}
static int
@@ -218,7 +229,7 @@
card->private_free = efw_card_free;
efw->card = card;
- efw->unit = unit;
+ efw->unit = fw_unit_get(unit);
mutex_init(&efw->mutex);
spin_lock_init(&efw->lock);
init_waitqueue_head(&efw->hwdep_wait);
@@ -289,10 +300,7 @@
{
struct snd_efw *efw = dev_get_drvdata(&unit->device);
- snd_efw_stream_destroy_duplex(efw);
- snd_efw_transaction_remove_instance(efw);
-
- snd_card_disconnect(efw->card);
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(efw->card);
}
diff --git a/sound/firewire/fireworks/fireworks_stream.c b/sound/firewire/fireworks/fireworks_stream.c
index 4f440e1..c55db1b 100644
--- a/sound/firewire/fireworks/fireworks_stream.c
+++ b/sound/firewire/fireworks/fireworks_stream.c
@@ -100,17 +100,22 @@
return err;
}
+/*
+ * This function should be called before starting the stream or after stopping
+ * the streams.
+ */
static void
destroy_stream(struct snd_efw *efw, struct amdtp_stream *stream)
{
- stop_stream(efw, stream);
-
- amdtp_stream_destroy(stream);
+ struct cmp_connection *conn;
if (stream == &efw->tx_stream)
- cmp_connection_destroy(&efw->out_conn);
+ conn = &efw->out_conn;
else
- cmp_connection_destroy(&efw->in_conn);
+ conn = &efw->in_conn;
+
+ amdtp_stream_destroy(stream);
+ cmp_connection_destroy(&efw->out_conn);
}
static int
@@ -319,12 +324,8 @@
void snd_efw_stream_destroy_duplex(struct snd_efw *efw)
{
- mutex_lock(&efw->mutex);
-
destroy_stream(efw, &efw->rx_stream);
destroy_stream(efw, &efw->tx_stream);
-
- mutex_unlock(&efw->mutex);
}
void snd_efw_stream_lock_changed(struct snd_efw *efw)
diff --git a/sound/firewire/oxfw/oxfw-stream.c b/sound/firewire/oxfw/oxfw-stream.c
index bda845a..29ccb36 100644
--- a/sound/firewire/oxfw/oxfw-stream.c
+++ b/sound/firewire/oxfw/oxfw-stream.c
@@ -337,6 +337,10 @@
stop_stream(oxfw, stream);
}
+/*
+ * This function should be called before starting the stream or after stopping
+ * the streams.
+ */
void snd_oxfw_stream_destroy_simplex(struct snd_oxfw *oxfw,
struct amdtp_stream *stream)
{
@@ -347,8 +351,6 @@
else
conn = &oxfw->in_conn;
- stop_stream(oxfw, stream);
-
amdtp_stream_destroy(stream);
cmp_connection_destroy(conn);
}
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 60e5cad..8c6ce01 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -104,11 +104,23 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void oxfw_card_free(struct snd_card *card)
{
struct snd_oxfw *oxfw = card->private_data;
unsigned int i;
+ snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream);
+ if (oxfw->has_output)
+ snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
+
+ fw_unit_put(oxfw->unit);
+
for (i = 0; i < SND_OXFW_STREAM_FORMAT_ENTRIES; i++) {
kfree(oxfw->tx_stream_formats[i]);
kfree(oxfw->rx_stream_formats[i]);
@@ -136,7 +148,7 @@
oxfw = card->private_data;
oxfw->card = card;
mutex_init(&oxfw->mutex);
- oxfw->unit = unit;
+ oxfw->unit = fw_unit_get(unit);
oxfw->device_info = (const struct device_info *)id->driver_data;
spin_lock_init(&oxfw->lock);
init_waitqueue_head(&oxfw->hwdep_wait);
@@ -212,12 +224,7 @@
{
struct snd_oxfw *oxfw = dev_get_drvdata(&unit->device);
- snd_card_disconnect(oxfw->card);
-
- snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream);
- if (oxfw->has_output)
- snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
-
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(oxfw->card);
}
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index dfcb5e9..a2ce773 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -961,7 +961,6 @@
dev_err(chip->card->dev, "cannot allocate CORB/RIRB\n");
return err;
}
-EXPORT_SYMBOL_GPL(azx_alloc_cmd_io);
static void azx_init_cmd_io(struct azx *chip)
{
@@ -1026,7 +1025,6 @@
azx_writeb(chip, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
spin_unlock_irq(&chip->reg_lock);
}
-EXPORT_SYMBOL_GPL(azx_init_cmd_io);
static void azx_free_cmd_io(struct azx *chip)
{
@@ -1036,7 +1034,6 @@
azx_writeb(chip, CORBCTL, 0);
spin_unlock_irq(&chip->reg_lock);
}
-EXPORT_SYMBOL_GPL(azx_free_cmd_io);
static unsigned int azx_command_addr(u32 cmd)
{
@@ -1316,7 +1313,6 @@
else
return azx_corb_send_cmd(bus, val);
}
-EXPORT_SYMBOL_GPL(azx_send_cmd);
/* get a response */
static unsigned int azx_get_response(struct hda_bus *bus,
@@ -1330,7 +1326,6 @@
else
return azx_rirb_get_response(bus, addr);
}
-EXPORT_SYMBOL_GPL(azx_get_response);
#ifdef CONFIG_SND_HDA_DSP_LOADER
/*
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 36d2f20..4ca3d5d 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1966,7 +1966,7 @@
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6d36c5b..87eff31 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -79,6 +79,7 @@
STAC_ALIENWARE_M17X,
STAC_92HD89XX_HP_FRONT_JACK,
STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK,
+ STAC_92HD73XX_ASUS_MOBO,
STAC_92HD73XX_MODELS
};
@@ -1911,7 +1912,18 @@
[STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK] = {
.type = HDA_FIXUP_PINS,
.v.pins = stac92hd89xx_hp_z1_g2_right_mic_jack_pin_configs,
- }
+ },
+ [STAC_92HD73XX_ASUS_MOBO] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ /* enable 5.1 and SPDIF out */
+ { 0x0c, 0x01014411 },
+ { 0x0d, 0x01014410 },
+ { 0x0e, 0x01014412 },
+ { 0x22, 0x014b1180 },
+ { }
+ }
+ },
};
static const struct hda_model_fixup stac92hd73xx_models[] = {
@@ -1923,6 +1935,7 @@
{ .id = STAC_DELL_M6_BOTH, .name = "dell-m6" },
{ .id = STAC_DELL_EQ, .name = "dell-eq" },
{ .id = STAC_ALIENWARE_M17X, .name = "alienware" },
+ { .id = STAC_92HD73XX_ASUS_MOBO, .name = "asus-mobo" },
{}
};
@@ -1975,6 +1988,8 @@
"HP Z1 G2", STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x2b17,
"unknown HP", STAC_92HD89XX_HP_FRONT_JACK),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_ASUSTEK, 0x83f8, "ASUS AT4NM10",
+ STAC_92HD73XX_ASUS_MOBO),
{} /* terminator */
};
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index 6c14afe..db1d3a2 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -289,7 +289,7 @@
memcpy_t fn = r->fn.memcpy;
int i;
- memcpy_alloc_mem(&src, &dst, len);
+ memcpy_alloc_mem(&dst, &src, len);
if (prefault)
fn(dst, src, len);
@@ -312,7 +312,7 @@
void *src = NULL, *dst = NULL;
int i;
- memcpy_alloc_mem(&src, &dst, len);
+ memcpy_alloc_mem(&dst, &src, len);
if (prefault)
fn(dst, src, len);
diff --git a/tools/perf/config/Makefile.arch b/tools/perf/config/Makefile.arch
index ff95a68..ac8721f 100644
--- a/tools/perf/config/Makefile.arch
+++ b/tools/perf/config/Makefile.arch
@@ -21,6 +21,10 @@
endif
endif
+ifeq ($(RAW_ARCH),sparc64)
+ ARCH ?= sparc
+endif
+
ARCH ?= $(RAW_ARCH)
LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1)
diff --git a/tools/perf/config/feature-checks/Makefile b/tools/perf/config/feature-checks/Makefile
index 42ac05a..b32ff33 100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@ -49,7 +49,7 @@
$(BUILD)
test-pthread-attr-setaffinity-np.bin:
- $(BUILD) -Werror -lpthread
+ $(BUILD) -D_GNU_SOURCE -Werror -lpthread
test-stackprotector-all.bin:
$(BUILD) -Werror -fstack-protector-all
diff --git a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
index 0a0d3ec..2b81b72 100644
--- a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
+++ b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
@@ -5,10 +5,11 @@
{
int ret = 0;
pthread_attr_t thread_attr;
+ cpu_set_t cs;
pthread_attr_init(&thread_attr);
/* don't care abt exact args, just the API itself in libpthread */
- ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
+ ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cs), &cs);
return ret;
}
diff --git a/tools/perf/util/cloexec.c b/tools/perf/util/cloexec.c
index 47b78b3..6da965b 100644
--- a/tools/perf/util/cloexec.c
+++ b/tools/perf/util/cloexec.c
@@ -25,6 +25,10 @@
if (cpu < 0)
cpu = 0;
+ /*
+ * Using -1 for the pid is a workaround to avoid gratuitous jump label
+ * changes.
+ */
while (1) {
/* check cloexec flag */
fd = sys_perf_event_open(&attr, pid, cpu, -1,
@@ -47,16 +51,24 @@
err, strerror_r(err, sbuf, sizeof(sbuf)));
/* not supported, confirm error related to PERF_FLAG_FD_CLOEXEC */
- fd = sys_perf_event_open(&attr, pid, cpu, -1, 0);
+ while (1) {
+ fd = sys_perf_event_open(&attr, pid, cpu, -1, 0);
+ if (fd < 0 && pid == -1 && errno == EACCES) {
+ pid = 0;
+ continue;
+ }
+ break;
+ }
err = errno;
+ if (fd >= 0)
+ close(fd);
+
if (WARN_ONCE(fd < 0 && err != EBUSY,
"perf_event_open(..., 0) failed unexpectedly with error %d (%s)\n",
err, strerror_r(err, sbuf, sizeof(sbuf))))
return -1;
- close(fd);
-
return 0;
}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index c94a9e0..e99a676 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -28,7 +28,7 @@
int mask;
int refcnt;
unsigned int prev;
- char event_copy[PERF_SAMPLE_MAX_SIZE];
+ char event_copy[PERF_SAMPLE_MAX_SIZE] __attribute__((aligned(8)));
};
struct perf_evlist {
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index b24f9d8..33b7a2a 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -11,6 +11,11 @@
#include <symbol/kallsyms.h>
#include "debug.h"
+#ifndef EM_AARCH64
+#define EM_AARCH64 183 /* ARM 64 bit */
+#endif
+
+
#ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
extern char *cplus_demangle(const char *, int);
diff --git a/tools/thermal/tmon/.gitignore b/tools/thermal/tmon/.gitignore
new file mode 100644
index 0000000..06e96be
--- /dev/null
+++ b/tools/thermal/tmon/.gitignore
@@ -0,0 +1 @@
+/tmon
diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
index e775adc..0788621 100644
--- a/tools/thermal/tmon/Makefile
+++ b/tools/thermal/tmon/Makefile
@@ -2,8 +2,8 @@
BINDIR=usr/bin
WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int
-CFLAGS= -O1 ${WARNFLAGS} -fstack-protector
-CC=gcc
+CFLAGS+= -O1 ${WARNFLAGS} -fstack-protector
+CC=$(CROSS_COMPILE)gcc
CFLAGS+=-D VERSION=\"$(VERSION)\"
LDFLAGS+=
@@ -16,12 +16,21 @@
CONFIG_FILE=
CONFIG_PATH=
+# Static builds might require -ltinfo, for instance
+ifneq ($(findstring -static, $(LDFLAGS)),)
+STATIC := --static
+endif
+
+TMON_LIBS=-lm -lpthread
+TMON_LIBS += $(shell pkg-config --libs $(STATIC) panelw ncursesw 2> /dev/null || \
+ pkg-config --libs $(STATIC) panel ncurses 2> /dev/null || \
+ echo -lpanel -lncurses)
OBJS = tmon.o tui.o sysfs.o pid.o
OBJS +=
tmon: $(OBJS) Makefile tmon.h
- $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread
+ $(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -o $(TARGET) $(TMON_LIBS)
valgrind: tmon
sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null
diff --git a/tools/thermal/tmon/tmon.8 b/tools/thermal/tmon/tmon.8
index 0be727c..02d5179 100644
--- a/tools/thermal/tmon/tmon.8
+++ b/tools/thermal/tmon/tmon.8
@@ -55,6 +55,8 @@
.PP
The \fB-t --time-interval\fP option sets the polling interval in seconds
.PP
+The \fB-T --target-temp\fP option sets the initial target temperature
+.PP
The \fB-v --version\fP option shows the version of \fBtmon \fP
.PP
The \fB-z --zone\fP option sets the target therma zone instance to be controlled
diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c
index 09b7c32..9aa1965 100644
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -64,6 +64,7 @@
printf(" -h, --help show this help message\n");
printf(" -l, --log log data to /var/tmp/tmon.log\n");
printf(" -t, --time-interval sampling time interval, > 1 sec.\n");
+ printf(" -T, --target-temp initial target temperature\n");
printf(" -v, --version show version\n");
printf(" -z, --zone target thermal zone id\n");
@@ -219,6 +220,7 @@
{ "control", 1, NULL, 'c' },
{ "daemon", 0, NULL, 'd' },
{ "time-interval", 1, NULL, 't' },
+ { "target-temp", 1, NULL, 'T' },
{ "log", 0, NULL, 'l' },
{ "help", 0, NULL, 'h' },
{ "version", 0, NULL, 'v' },
@@ -231,7 +233,7 @@
{
int err = 0;
int id2 = 0, c;
- double yk = 0.0; /* controller output */
+ double yk = 0.0, temp; /* controller output */
int target_tz_index;
if (geteuid() != 0) {
@@ -239,7 +241,7 @@
exit(EXIT_FAILURE);
}
- while ((c = getopt_long(argc, argv, "c:dlht:vgz:", opts, &id2)) != -1) {
+ while ((c = getopt_long(argc, argv, "c:dlht:T:vgz:", opts, &id2)) != -1) {
switch (c) {
case 'c':
no_control = 0;
@@ -254,6 +256,14 @@
if (ticktime < 1)
ticktime = 1;
break;
+ case 'T':
+ temp = strtod(optarg, NULL);
+ if (temp < 0) {
+ fprintf(stderr, "error: temperature must be positive\n");
+ return 1;
+ }
+ target_temp_user = temp;
+ break;
case 'l':
printf("Logging data to /var/tmp/tmon.log\n");
logging = 1;
diff --git a/tools/thermal/tmon/tui.c b/tools/thermal/tmon/tui.c
index 89f8ef0..b5d1c6b 100644
--- a/tools/thermal/tmon/tui.c
+++ b/tools/thermal/tmon/tui.c
@@ -30,6 +30,18 @@
#include "tmon.h"
+#define min(x, y) ({ \
+ typeof(x) _min1 = (x); \
+ typeof(y) _min2 = (y); \
+ (void) (&_min1 == &_min2); \
+ _min1 < _min2 ? _min1 : _min2; })
+
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+
static PANEL *data_panel;
static PANEL *dialogue_panel;
static PANEL *top;
@@ -98,6 +110,18 @@
wrefresh(status_bar_window);
}
+/* wrap at 5 */
+#define DIAG_DEV_ROWS 5
+/*
+ * list cooling devices + "set temp" entry; wraps after 5 rows, if they fit
+ */
+static int diag_dev_rows(void)
+{
+ int entries = ptdata.nr_cooling_dev + 1;
+ int rows = max(DIAG_DEV_ROWS, (entries + 1) / 2);
+ return min(rows, entries);
+}
+
void setup_windows(void)
{
int y_begin = 1;
@@ -122,7 +146,7 @@
* dialogue window is a pop-up, when needed it lays on top of cdev win
*/
- dialogue_window = subwin(stdscr, ptdata.nr_cooling_dev+5, maxx-50,
+ dialogue_window = subwin(stdscr, diag_dev_rows() + 5, maxx-50,
DIAG_Y, DIAG_X);
thermal_data_window = subwin(stdscr, ptdata.nr_tz_sensor *
@@ -258,21 +282,26 @@
}
const char DIAG_TITLE[] = "[ TUNABLES ]";
-#define DIAG_DEV_ROWS 5
void show_dialogue(void)
{
int j, x = 0, y = 0;
+ int rows, cols;
WINDOW *w = dialogue_window;
if (tui_disabled || !w)
return;
+ getmaxyx(w, rows, cols);
+
+ /* Silence compiler 'unused' warnings */
+ (void)cols;
+
werase(w);
box(w, 0, 0);
mvwprintw(w, 0, maxx/4, DIAG_TITLE);
/* list all the available tunables */
for (j = 0; j <= ptdata.nr_cooling_dev; j++) {
- y = j % DIAG_DEV_ROWS;
+ y = j % diag_dev_rows();
if (y == 0 && j != 0)
x += 20;
if (j == ptdata.nr_cooling_dev)
@@ -283,12 +312,10 @@
ptdata.cdi[j].type, ptdata.cdi[j].instance);
}
wattron(w, A_BOLD);
- mvwprintw(w, DIAG_DEV_ROWS+1, 1, "Enter Choice [A-Z]?");
+ mvwprintw(w, diag_dev_rows()+1, 1, "Enter Choice [A-Z]?");
wattroff(w, A_BOLD);
- /* y size of dialogue win is nr cdev + 5, so print legend
- * at the bottom line
- */
- mvwprintw(w, ptdata.nr_cooling_dev+3, 1,
+ /* print legend at the bottom line */
+ mvwprintw(w, rows - 2, 1,
"Legend: A=Active, P=Passive, C=Critical");
wrefresh(dialogue_window);
@@ -437,7 +464,7 @@
snprintf(buf, sizeof(buf), "New Value for %.10s-%2d: ",
ptdata.cdi[cdev_id].type,
ptdata.cdi[cdev_id].instance);
- write_dialogue_win(buf, DIAG_DEV_ROWS+2, 2);
+ write_dialogue_win(buf, diag_dev_rows() + 2, 2);
handle_input_val(cdev_id);
} else {
snprintf(buf, sizeof(buf), "Invalid selection %d", ch);