Fix misspellings of "whether" in comments.
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
index 6e7dc9d..eecea2a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
@@ -74,7 +74,7 @@
/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
+ * whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index ee99fd5..6b72d5a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -88,7 +88,7 @@
*
* This represents the state of the DMA engine, wrt to the loaded / running
* transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
+ * the DMA transfers, we need to know the state to make decisions on whether
* we can
*
* S3C2410_DMA_NONE
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
index 99612fc..28376e5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
@@ -51,7 +51,7 @@
#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
+ * whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 60627e6..724755f 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -121,7 +121,7 @@
int pin;
/* for each of the external interrupts (EINT0..EINT15) we
- * need to check wether it is an external interrupt source,
+ * need to check whether it is an external interrupt source,
* and then configure it as an input if it is not
*/
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index db98e70..3eb5139 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -325,7 +325,7 @@
chan->state = S3C2410_DMA_RUNNING;
- /* check wether there is anything to load, and if not, see
+ /* check whether there is anything to load, and if not, see
* if we can find anything to load
*/
diff --git a/arch/m68k/math-emu/fp_log.c b/arch/m68k/math-emu/fp_log.c
index 3384a52..0663067 100644
--- a/arch/m68k/math-emu/fp_log.c
+++ b/arch/m68k/math-emu/fp_log.c
@@ -50,7 +50,7 @@
* sqrt(m*2^e) =
* sqrt(2*m) * 2^(p) , if e = 2*p + 1
*
- * So we use the last bit of the exponent to decide wether to
+ * So we use the last bit of the exponent to decide whether to
* use the m or 2*m.
*
* Since only the fractional part of the mantissa is stored and
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index eedf427c9..3e13e23 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -23,7 +23,7 @@
/* Note the full page bits must be in the same location as for normal
* 4k pages as the same assembly will be used to insert 64K pages
- * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ * whether the kernel has CONFIG_PPC_64K_PAGES or not
*/
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
index ae20ce1a..6e909f3 100644
--- a/arch/powerpc/include/asm/smu.h
+++ b/arch/powerpc/include/asm/smu.h
@@ -132,7 +132,7 @@
*
* At this point, the OF driver seems to have a limitation on transfer
* sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
- * wether this is just an OF limit due to some temporary buffer size
+ * whether this is just an OF limit due to some temporary buffer size
* or if this is an SMU imposed limit. This driver has the same limitation
* for now as I use a 0x10 bytes temporary buffer as well
*
@@ -236,7 +236,7 @@
* 3 (optional): enable nmi? [0x00 or 0x01]
*
* Returns:
- * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ * If parameter 2 is 0x00 and parameter 3 is not specified, returns whether
* NMI is enabled. Otherwise unknown.
*/
#define SMU_CMD_MISC_df_NMI_OPTION 0x04
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index bedd12e..0733b05 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -387,7 +387,7 @@
of_node_put(parent);
continue;
}
- /* Check for known pciclass, and also check wether we have
+ /* Check for known pciclass, and also check whether we have
* a device with child nodes for ports or not
*/
if (of_device_is_compatible(np, "pciclass,0700") ||
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 2049f2d0..9db8ec0 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -82,7 +82,7 @@
return -ENXIO;
/* Claim resources. This might need some rework as well depending
- * wether we are doing probe-only or not, like assigning unassigned
+ * whether we are doing probe-only or not, like assigning unassigned
* resources etc...
*/
pcibios_claim_one_bus(phb->bus);
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index d183f87..1ca045d 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -83,7 +83,7 @@
* the context). This is very important because we must ensure we
* don't lose the VRSAVE content that may have been set prior to
* the process doing its first vector operation
- * Userland shall check AT_HWCAP to know wether it can rely on the
+ * Userland shall check AT_HWCAP to know whether it can rely on the
* v_regs pointer or not
*/
#ifdef CONFIG_ALTIVEC
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 5829d2a..cf9dada 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -722,7 +722,7 @@
}
/*
- * is_hugepage_only_range() is used by generic code to verify wether
+ * is_hugepage_only_range() is used by generic code to verify whether
* a normal mmap mapping (non hugetlbfs) is valid on a given area.
*
* until the generic code provides a more generic hook and/or starts
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 028470b..a51cb07 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -526,7 +526,7 @@
#define WDT_IDENTITY "mpc52xx watchdog on GPT0"
-/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
/* wdt-capable gpt */
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index dca2136..e56bb65 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -728,7 +728,7 @@
nid, np->full_name);
/* XXX todo: If we can have multiple windows on the same IOMMU, which
- * isn't the case today, we probably want here to check wether the
+ * isn't the case today, we probably want here to check whether the
* iommu for that node is already setup.
* However, there might be issue with getting the size right so let's
* ignore that for now. We might want to completely get rid of the
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index d8b7cc8..8e29944 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -148,7 +148,7 @@
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
- * be the same as the interrupt source number. I don't know wether
+ * be the same as the interrupt source number. I don't know whether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
@@ -220,7 +220,7 @@
/* For hooking up the cascace we have a problem. Our device-tree is
* crap and we don't know on which BE iic interrupt we are hooked on at
* least not the "standard" way. We can reconstitute it based on two
- * informations though: which BE node we are connected to and wether
+ * informations though: which BE node we are connected to and whether
* we are connected to IOIF0 or IOIF1. Right now, we really only care
* about the IBM cell blade and we know that its firmware gives us an
* interrupt-map property which is pretty strange.
@@ -232,7 +232,7 @@
int imaplen, intsize, unit;
struct device_node *iic;
- /* First, we check wether we have a real "interrupts" in the device
+ /* First, we check whether we have a real "interrupts" in the device
* tree in case the device-tree is ever fixed
*/
struct of_irq oirq;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index c4e6305..31036b5 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -529,7 +529,7 @@
void __init pmac_pic_init(void)
{
/* We configure the OF parsing based on our oldworld vs. newworld
- * platform type and wether we were booted by BootX.
+ * platform type and whether we were booted by BootX.
*/
#ifdef CONFIG_PPC32
if (!pmac_newworld)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 14313ad..4250949 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1648,7 +1648,7 @@
ring->wptr = 0;
WREG32(CP_RB_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 81e6a56..cda01f8 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1059,7 +1059,7 @@
WREG32(CP_DEBUG, (1 << 27));
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
WREG32(SCRATCH_UMSK, 0xff);
@@ -1076,7 +1076,7 @@
#endif
WREG32(cp_rb_cntl[i], rb_cntl);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index b0db712..ea4691f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2007,7 +2007,7 @@
ring->wptr = 0;
WREG32(CP_RB0_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
@@ -2040,7 +2040,7 @@
ring->wptr = 0;
WREG32(CP_RB1_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
@@ -2066,7 +2066,7 @@
ring->wptr = 0;
WREG32(CP_RB2_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index f41502e..a23b91b 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -304,7 +304,7 @@
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f..de9e1fa 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -208,7 +208,7 @@
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
- /* todo - check for wether ack wanted or not */
+ /* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
@@ -397,7 +397,7 @@
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 891558d..2de66b0 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -219,7 +219,7 @@
platram_setrw(info, PLATRAM_RW);
- /* check to see if there are any available partitions, or wether
+ /* check to see if there are any available partitions, or whether
* to add this device whole */
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 295e4be..79ded48 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -879,7 +879,7 @@
if (chip->ecc.mode != NAND_ECC_HW)
return;
- /* change the behaviour depending on wether we are using
+ /* change the behaviour depending on whether we are using
* the large or small page nand device */
if (chip->page_shift > 10) {
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 203ff9d..846381c 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -109,7 +109,7 @@
/*
* ax_initial_check
*
- * do an initial probe for the card to check wether it exists
+ * do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b86..75ec5e7 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -27,7 +27,7 @@
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
- * offsetof(field) to check wether a given MCP implements them.
+ * offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 58f13ad..ae7cd7f 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -608,7 +608,7 @@
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* try to find out wether we have a link */
+ /* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -634,7 +634,7 @@
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -681,7 +681,7 @@
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* find out wether we have a link */
+ /* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -710,7 +710,7 @@
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 26c81f2..afb7cfa 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -118,7 +118,7 @@
return ret;
}
-/* simple check to see wether we have a isl1208 */
+/* simple check to see whether we have a isl1208 */
static int
isl1208_i2c_validate_client(struct i2c_client *client)
{
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 77823d2..a7a2a99 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -186,7 +186,7 @@
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
- /* the only way to work out wether the system was mid-update
+ /* the only way to work out whether the system was mid-update
* when we read it is to check the second counter, and if it
* is zero, then we re-try the entire read
*/
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index b2b8c18..20cfd02 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1344,7 +1344,7 @@
/*
* Set / reset given feature.
- * Flag indicates wether to set (!=0) or the reset (=0) the feature.
+ * Flag indicates whether to set (!=0) or the reset (=0) the feature.
*/
int
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d36446d..73c93cf 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -883,7 +883,7 @@
} else {
US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
chip->proto_handler_backup(srb, us);
- /* Check wether card is plugged in */
+ /* Check whether card is plugged in */
if (srb->cmnd[0] == TEST_UNIT_READY) {
if (srb->result == SAM_STAT_GOOD) {
SET_LUN_READY(chip, srb->device->lun);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 5b06d31..c0bc92d 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -212,7 +212,7 @@
return 0;
}
-/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
static int booke_wdt_open(struct inode *inode, struct file *file)
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 3d3e2c1..06b2635 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3888,7 +3888,7 @@
* @root - the root we're allocating for
* @block_rsv - the block_rsv we're allocating for
* @orig_bytes - the number of bytes we want
- * @flush - wether or not we can flush to make our reservation
+ * @flush - whether or not we can flush to make our reservation
*
* This will reserve orgi_bytes number of bytes from the space info associated
* with the block_rsv. If there is not enough space it will make an attempt to
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index dd27a0b..853fc7b 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -76,7 +76,7 @@
#define BTRFS_ORDERED_IOERR 6 /* We had an io error when writing this out */
-#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates wether this ordered extent
+#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates whether this ordered extent
* has done its due diligence in updating
* the isize. */
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 3c20de1..df163da 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2455,7 +2455,7 @@
BUFFER_FNS(Da_Mapped, da_mapped)
/*
- * Add new method to test wether block and inode bitmaps are properly
+ * Add new method to test whether block and inode bitmaps are properly
* initialized. With uninit_bg reading the block from disk is not enough
* to mark the bitmap uptodate. We need to also zero-out the bitmap
*/
diff --git a/fs/fhandle.c b/fs/fhandle.c
index f775bfd..cccdc87 100644
--- a/fs/fhandle.c
+++ b/fs/fhandle.c
@@ -22,7 +22,7 @@
struct file_handle *handle = NULL;
/*
- * We need t make sure wether the file system
+ * We need to make sure whether the file system
* support decoding of the file handle
*/
if (!path->dentry->d_sb->s_export_op ||
@@ -40,7 +40,7 @@
if (!handle)
return -ENOMEM;
- /* convert handle size to multiple of sizeof(u32) */
+ /* convert handle size to multiple of sizeof(u32) */
handle_dwords = f_handle.handle_bytes >> 2;
/* we ask for a non connected handle */
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 78b7f84..8b472c8 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1259,7 +1259,7 @@
goto not_jbd;
}
- /* keep track of wether or not this transaction modified us */
+ /* keep track of whether or not this transaction modified us */
was_modified = jh->b_modified;
/*
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index a74ba46..d8da40e 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1261,7 +1261,7 @@
goto not_jbd;
}
- /* keep track of wether or not this transaction modified us */
+ /* keep track of whether or not this transaction modified us */
was_modified = jh->b_modified;
/*
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index adb9011..af49e2d 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -33,7 +33,7 @@
* are being written out - and waiting for GC to make progress, naturally.
*
* So we cannot just call iget() or some variant of it, but first have to check
- * wether the inode in question might be in I_FREEING state. Therefore we
+ * whether the inode in question might be in I_FREEING state. Therefore we
* maintain our own per-sb list of "almost deleted" inodes and check against
* that list first. Normally this should be at most 1-2 entries long.
*
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 7a71ffa..cafc7f9 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -52,8 +52,8 @@
For crash recovery after replication node failure,
we need to resync all regions that have been target of in-flight WRITE IO
- (in use, or "hot", regions), as we don't know wether or not those WRITEs have
- made it to stable storage.
+ (in use, or "hot", regions), as we don't know whether or not those WRITEs
+ have made it to stable storage.
To avoid a "full resync", we need to persistently track these regions.
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index 0ee42d9..2c02f3a 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -78,7 +78,7 @@
* This function acquires VGA resources for the given
* card and mark those resources locked. If the resource requested
* are "normal" (and not legacy) resources, the arbiter will first check
- * wether the card is doing legacy decoding for that type of resource. If
+ * whether the card is doing legacy decoding for that type of resource. If
* yes, the lock is "converted" into a legacy resource lock.
* The arbiter will first look for all VGA cards that might conflict
* and disable their IOs and/or Memory access, including VGA forwarding
@@ -89,7 +89,7 @@
* This function will block if some conflicting card is already locking
* one of the required resources (or any resource on a different bus
* segment, since P2P bridges don't differenciate VGA memory and IO
- * afaik). You can indicate wether this blocking should be interruptible
+ * afaik). You can indicate whether this blocking should be interruptible
* by a signal (for userland interface) or not.
* Must not be called at interrupt time or in atomic context.
* If the card already owns the resources, the function succeeds.
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index b7f45d4..87490ac 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -105,7 +105,7 @@
#define WATCHDOG_NOWAYOUT_INIT_STATUS 0
#endif
-/* Use the following function to check wether or not the watchdog is active */
+/* Use the following function to check whether or not the watchdog is active */
static inline bool watchdog_active(struct watchdog_device *wdd)
{
return test_bit(WDOG_ACTIVE, &wdd->status);
diff --git a/include/net/sock.h b/include/net/sock.h
index c945fba..a95e075 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -213,7 +213,7 @@
* @sk_sndbuf: size of send buffer in bytes
* @sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE,
* %SO_OOBINLINE settings, %SO_TIMESTAMPING settings
- * @sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets
+ * @sk_no_check: %SO_NO_CHECK setting, whether or not checkup packets
* @sk_route_caps: route capabilities (e.g. %NETIF_F_TSO)
* @sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK)
* @sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
diff --git a/net/can/proc.c b/net/can/proc.c
index 3b6dd31..ae56690 100644
--- a/net/can/proc.c
+++ b/net/can/proc.c
@@ -397,7 +397,7 @@
int i;
int all_empty = 1;
- /* check wether at least one list is non-empty */
+ /* check whether at least one list is non-empty */
for (i = 0; i < 0x800; i++)
if (!hlist_empty(&d->rx_sff[i])) {
all_empty = 0;
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 5d0e568..dc14234 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2291,7 +2291,7 @@
outb(0x88, iobase+0x1f);
/* it appears some maestros (dell 7500) only work if these are set,
- regardless of wether we use the assp or not. */
+ regardless of whether we use the assp or not. */
outb(0, iobase + ASSP_CONTROL_B);
outb(3, iobase + ASSP_CONTROL_A); /* M: Reserved bits... */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 0f58b4b..007fcec 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -675,7 +675,7 @@
*/
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
{
- /* it depends on altsetting wether the device is big-endian or not */
+ /* it depends on altsetting whether the device is big-endian or not */
switch (chip->usb_id) {
case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
if (fp->altsetting == 2 || fp->altsetting == 3 ||