| /* linux/arch/arm/plat-s5p/irq-gpioint.c |
| * |
| * Copyright (c) 2010 Samsung Electronics Co., Ltd. |
| * Author: Kyungmin Park <kyungmin.park@samsung.com> |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| * Author: Marek Szyprowski <m.szyprowski@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <mach/map.h> |
| #include <plat/gpio-core.h> |
| #include <plat/gpio-cfg.h> |
| |
| #include <asm/mach/irq.h> |
| |
| #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) |
| |
| #define CON_OFFSET 0x700 |
| #define MASK_OFFSET 0x900 |
| #define PEND_OFFSET 0xA00 |
| #define REG_OFFSET(x) ((x) << 2) |
| |
| struct s5p_gpioint_bank { |
| struct list_head list; |
| int start; |
| int nr_groups; |
| int irq; |
| struct samsung_gpio_chip **chips; |
| void (*handler)(unsigned int, struct irq_desc *); |
| }; |
| |
| LIST_HEAD(banks); |
| |
| static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); |
| struct irq_chip_type *ct = gc->chip_types; |
| unsigned int shift = (d->irq - gc->irq_base) << 2; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| type = S5P_IRQ_TYPE_EDGE_RISING; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| type = S5P_IRQ_TYPE_EDGE_FALLING; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| type = S5P_IRQ_TYPE_EDGE_BOTH; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| type = S5P_IRQ_TYPE_LEVEL_HIGH; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| type = S5P_IRQ_TYPE_LEVEL_LOW; |
| break; |
| case IRQ_TYPE_NONE: |
| default: |
| printk(KERN_WARNING "No irq type\n"); |
| return -EINVAL; |
| } |
| |
| gc->type_cache &= ~(0x7 << shift); |
| gc->type_cache |= type << shift; |
| writel(gc->type_cache, gc->reg_base + ct->regs.type); |
| return 0; |
| } |
| |
| static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| struct s5p_gpioint_bank *bank = irq_get_handler_data(irq); |
| int group, pend_offset, mask_offset; |
| unsigned int pend, mask; |
| |
| struct irq_chip *chip = irq_get_chip(irq); |
| chained_irq_enter(chip, desc); |
| |
| for (group = 0; group < bank->nr_groups; group++) { |
| struct samsung_gpio_chip *chip = bank->chips[group]; |
| if (!chip) |
| continue; |
| |
| pend_offset = REG_OFFSET(group); |
| pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); |
| if (!pend) |
| continue; |
| |
| mask_offset = REG_OFFSET(group); |
| mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); |
| pend &= ~mask; |
| |
| while (pend) { |
| int offset = fls(pend) - 1; |
| int real_irq = chip->irq_base + offset; |
| generic_handle_irq(real_irq); |
| pend &= ~BIT(offset); |
| } |
| } |
| chained_irq_exit(chip, desc); |
| } |
| |
| static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) |
| { |
| static int used_gpioint_groups = 0; |
| int group = chip->group; |
| struct s5p_gpioint_bank *b, *bank = NULL; |
| struct irq_chip_generic *gc; |
| struct irq_chip_type *ct; |
| |
| if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) |
| return -ENOMEM; |
| |
| list_for_each_entry(b, &banks, list) { |
| if (group >= b->start && group < b->start + b->nr_groups) { |
| bank = b; |
| break; |
| } |
| } |
| if (!bank) |
| return -EINVAL; |
| |
| if (!bank->handler) { |
| bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * |
| bank->nr_groups, GFP_KERNEL); |
| if (!bank->chips) |
| return -ENOMEM; |
| |
| irq_set_chained_handler(bank->irq, s5p_gpioint_handler); |
| irq_set_handler_data(bank->irq, bank); |
| bank->handler = s5p_gpioint_handler; |
| printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", |
| bank->irq); |
| } |
| |
| /* |
| * chained GPIO irq has been successfully registered, allocate new gpio |
| * int group and assign irq nubmers |
| */ |
| chip->irq_base = S5P_GPIOINT_BASE + |
| used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; |
| used_gpioint_groups++; |
| |
| bank->chips[group - bank->start] = chip; |
| |
| gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base, |
| (void __iomem *)GPIO_BASE(chip), |
| handle_level_irq); |
| if (!gc) |
| return -ENOMEM; |
| ct = gc->chip_types; |
| ct->chip.irq_ack = irq_gc_ack_set_bit; |
| ct->chip.irq_mask = irq_gc_mask_set_bit; |
| ct->chip.irq_unmask = irq_gc_mask_clr_bit; |
| ct->chip.irq_set_type = s5p_gpioint_set_type, |
| ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start); |
| ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start); |
| ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start); |
| irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio), |
| IRQ_GC_INIT_MASK_CACHE, |
| IRQ_NOREQUEST | IRQ_NOPROBE, 0); |
| return 0; |
| } |
| |
| int __init s5p_register_gpio_interrupt(int pin) |
| { |
| struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); |
| int offset, group; |
| int ret; |
| |
| if (!my_chip) |
| return -EINVAL; |
| |
| offset = pin - my_chip->chip.base; |
| group = my_chip->group; |
| |
| /* check if the group has been already registered */ |
| if (my_chip->irq_base) |
| return my_chip->irq_base + offset; |
| |
| /* register gpio group */ |
| ret = s5p_gpioint_add(my_chip); |
| if (ret == 0) { |
| my_chip->chip.to_irq = samsung_gpiolib_to_irq; |
| printk(KERN_INFO "Registered interrupt support for gpio group %d.\n", |
| group); |
| return my_chip->irq_base + offset; |
| } |
| return ret; |
| } |
| |
| int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups) |
| { |
| struct s5p_gpioint_bank *bank; |
| |
| bank = kzalloc(sizeof(*bank), GFP_KERNEL); |
| if (!bank) |
| return -ENOMEM; |
| |
| bank->start = start; |
| bank->nr_groups = nr_groups; |
| bank->irq = chain_irq; |
| |
| list_add_tail(&bank->list, &banks); |
| return 0; |
| } |