staging: dwc2: rename DWC2_PARAM_TEST to DWC2_OUT_OF_BOUNDS
DWC2_PARAM_TEST is not a very good name for this macro, so rename
it to DWC2_OUT_OF_BOUNDS
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c
index 53d5408..460aee6 100644
--- a/drivers/staging/dwc2/core.c
+++ b/drivers/staging/dwc2/core.c
@@ -1941,7 +1941,7 @@
udelay(1);
}
-#define DWC2_PARAM_TEST(a, b, c) ((a) < (b) || (a) > (c))
+#define DWC2_OUT_OF_BOUNDS(a, b, c) ((a) < (b) || (a) > (c))
/* Parameter access functions */
int dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val)
@@ -2055,7 +2055,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"Wrong value for host_support_fs_low_power\n");
@@ -2238,8 +2238,8 @@
#endif
int retval = 0;
- if (DWC2_PARAM_TEST(val, DWC2_PHY_TYPE_PARAM_FS,
- DWC2_PHY_TYPE_PARAM_ULPI)) {
+ if (DWC2_OUT_OF_BOUNDS(val, DWC2_PHY_TYPE_PARAM_FS,
+ DWC2_PHY_TYPE_PARAM_ULPI)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for phy_type\n");
dev_err(hsotg->dev, "phy_type must be 0, 1 or 2\n");
@@ -2301,7 +2301,7 @@
int valid = 1;
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for speed parameter\n");
dev_err(hsotg->dev, "max_speed parameter must be 0 or 1\n");
@@ -2333,8 +2333,8 @@
int valid = 1;
int retval = 0;
- if (DWC2_PARAM_TEST(val, DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ,
- DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) {
+ if (DWC2_OUT_OF_BOUNDS(val, DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ,
+ DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) {
if (val >= 0) {
dev_err(hsotg->dev,
"Wrong value for host_ls_low_power_phy_clk parameter\n");
@@ -2369,7 +2369,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for phy_ulpi_ddr\n");
dev_err(hsotg->dev, "phy_upli_ddr must be 0 or 1\n");
@@ -2387,7 +2387,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"Wrong value for phy_ulpi_ext_vbus\n");
@@ -2440,7 +2440,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for ulpi_fs_ls\n");
dev_err(hsotg->dev, "ulpi_fs_ls must be 0 or 1\n");
@@ -2458,7 +2458,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for ts_dline\n");
dev_err(hsotg->dev, "ts_dline must be 0 or 1\n");
@@ -2479,7 +2479,7 @@
#endif
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for i2c_enable\n");
dev_err(hsotg->dev, "i2c_enable must be 0 or 1\n");
@@ -2518,7 +2518,7 @@
int valid = 1;
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"Wrong value for en_multiple_tx_fifo,\n");
@@ -2550,7 +2550,7 @@
int valid = 1;
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"'%d' invalid for parameter reload_ctl\n", val);
@@ -2590,7 +2590,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"'%d' invalid for parameter otg_ver\n", val);
@@ -2769,7 +2769,7 @@
{
int retval = 0;
- if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"'%d' invalid for parameter uframe_sched\n",