USB: remove dbg() usage in USB networking drivers
The dbg() USB macro is so old, it predates me. The USB networking drivers are
the last hold-out using this macro, and we want to get rid of it, so replace
the usage of it with the proper netdev_dbg() or dev_dbg() (depending on the
context) calls.
Some places we end up using a local variable for the debug call, so also
convert the other existing dev_* calls to use it as well, to save tiny amounts
of code space.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 26c5beb..18d9579 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -236,7 +236,8 @@
}
if (status) {
- dbg("rx_done, status %d, length %d", status, urb->actual_length);
+ dev_dbg(&urb->dev->dev, "rx_done, status %d, length %d\n",
+ status, urb->actual_length);
return;
}
@@ -275,10 +276,11 @@
if (atomic_read(&catc->recq_sz)) {
int state;
atomic_dec(&catc->recq_sz);
- dbg("getting extra packet");
+ netdev_dbg(catc->netdev, "getting extra packet\n");
urb->dev = catc->usbdev;
if ((state = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- dbg("submit(rx_urb) status %d", state);
+ netdev_dbg(catc->netdev,
+ "submit(rx_urb) status %d\n", state);
}
} else {
clear_bit(RX_RUNNING, &catc->flags);
@@ -317,18 +319,20 @@
return;
/* -EPIPE: should clear the halt */
default: /* error */
- dbg("irq_done, status %d, data %02x %02x.", status, data[0], data[1]);
+ dev_dbg(&urb->dev->dev,
+ "irq_done, status %d, data %02x %02x.\n",
+ status, data[0], data[1]);
goto resubmit;
}
if (linksts == LinkGood) {
netif_carrier_on(catc->netdev);
- dbg("link ok");
+ netdev_dbg(catc->netdev, "link ok\n");
}
if (linksts == LinkBad) {
netif_carrier_off(catc->netdev);
- dbg("link bad");
+ netdev_dbg(catc->netdev, "link bad\n");
}
if (hasdata) {
@@ -385,7 +389,7 @@
int r, status = urb->status;
if (status == -ECONNRESET) {
- dbg("Tx Reset.");
+ dev_dbg(&urb->dev->dev, "Tx Reset.\n");
urb->status = 0;
catc->netdev->trans_start = jiffies;
catc->netdev->stats.tx_errors++;
@@ -395,7 +399,8 @@
}
if (status) {
- dbg("tx_done, status %d, length %d", status, urb->actual_length);
+ dev_dbg(&urb->dev->dev, "tx_done, status %d, length %d\n",
+ status, urb->actual_length);
return;
}
@@ -511,7 +516,8 @@
int status = urb->status;
if (status)
- dbg("ctrl_done, status %d, len %d.", status, urb->actual_length);
+ dev_dbg(&urb->dev->dev, "ctrl_done, status %d, len %d.\n",
+ status, urb->actual_length);
spin_lock_irqsave(&catc->ctrl_lock, flags);
@@ -667,7 +673,9 @@
f5u011_mchash_async(catc, catc->multicast);
if (catc->rxmode[0] != rx) {
catc->rxmode[0] = rx;
- dbg("Setting RX mode to %2.2X %2.2X", catc->rxmode[0], catc->rxmode[1]);
+ netdev_dbg(catc->netdev,
+ "Setting RX mode to %2.2X %2.2X\n",
+ catc->rxmode[0], catc->rxmode[1]);
f5u011_rxmode_async(catc, catc->rxmode);
}
}
@@ -766,6 +774,7 @@
static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
+ struct device *dev = &intf->dev;
struct usb_device *usbdev = interface_to_usbdev(intf);
struct net_device *netdev;
struct catc *catc;
@@ -774,7 +783,7 @@
if (usb_set_interface(usbdev,
intf->altsetting->desc.bInterfaceNumber, 1)) {
- dev_err(&intf->dev, "Can't set altsetting 1.\n");
+ dev_err(dev, "Can't set altsetting 1.\n");
return -EIO;
}
@@ -817,7 +826,7 @@
if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 &&
le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
- dbg("Testing for f5u011");
+ dev_dbg(dev, "Testing for f5u011\n");
catc->is_f5u011 = 1;
atomic_set(&catc->recq_sz, 0);
pktsz = RX_PKT_SZ;
@@ -838,7 +847,7 @@
catc->irq_buf, 2, catc_irq_done, catc, 1);
if (!catc->is_f5u011) {
- dbg("Checking memory size\n");
+ dev_dbg(dev, "Checking memory size\n");
i = 0x12345678;
catc_write_mem(catc, 0x7a80, &i, 4);
@@ -850,7 +859,7 @@
case 0x12345678:
catc_set_reg(catc, TxBufCount, 8);
catc_set_reg(catc, RxBufCount, 32);
- dbg("64k Memory\n");
+ dev_dbg(dev, "64k Memory\n");
break;
default:
dev_warn(&intf->dev,
@@ -858,49 +867,49 @@
case 0x87654321:
catc_set_reg(catc, TxBufCount, 4);
catc_set_reg(catc, RxBufCount, 16);
- dbg("32k Memory\n");
+ dev_dbg(dev, "32k Memory\n");
break;
}
- dbg("Getting MAC from SEEROM.");
+ dev_dbg(dev, "Getting MAC from SEEROM.\n");
catc_get_mac(catc, netdev->dev_addr);
- dbg("Setting MAC into registers.");
+ dev_dbg(dev, "Setting MAC into registers.\n");
for (i = 0; i < 6; i++)
catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
- dbg("Filling the multicast list.");
+ dev_dbg(dev, "Filling the multicast list.\n");
memset(broadcast, 0xff, 6);
catc_multicast(broadcast, catc->multicast);
catc_multicast(netdev->dev_addr, catc->multicast);
catc_write_mem(catc, 0xfa80, catc->multicast, 64);
- dbg("Clearing error counters.");
+ dev_dbg(dev, "Clearing error counters.\n");
for (i = 0; i < 8; i++)
catc_set_reg(catc, EthStats + i, 0);
catc->last_stats = jiffies;
- dbg("Enabling.");
+ dev_dbg(dev, "Enabling.\n");
catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
catc_set_reg(catc, LEDCtrl, LEDLink);
catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
} else {
- dbg("Performing reset\n");
+ dev_dbg(dev, "Performing reset\n");
catc_reset(catc);
catc_get_mac(catc, netdev->dev_addr);
- dbg("Setting RX Mode");
+ dev_dbg(dev, "Setting RX Mode\n");
catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
catc->rxmode[1] = 0;
f5u011_rxmode(catc, catc->rxmode);
}
- dbg("Init done.");
+ dev_dbg(dev, "Init done.\n");
printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr);