tridentfb: acceleration code improvements
This patch brings various acceleration improvements:
- set copyarea/fillrect for non-accelerated framebuffer (fix)
- remove 15 bpp depth handling to simplify code as it hardly
works (15 bpp handling was obviously missing in some switches)
- add fb_sync call and move waiting before accelerated function
to make acceleration more asynchronous to cpu (few % of speed
improvement)
- add cpu_relax() call in waiting loops
- make longer register names and name more registers
- move registers' definition to header
- general code improvements (shortening, simplifying)
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 9b87c08..4a1258f 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1,5 +1,5 @@
/*
- * Frame buffer driver for Trident Blade and Image series
+ * Frame buffer driver for Trident TGUI, Blade and Image series
*
* Copyright 2001, 2002 - Jani Monoses <jani@iv.ro>
*
@@ -13,7 +13,6 @@
* code, suggestions
* TODO:
* timing value tweaking so it looks good on every monitor in every mode
- * TGUI acceleration
*/
#include <linux/module.h>
@@ -193,37 +192,13 @@
*/
#define point(x, y) ((y) << 16 | (x))
-#define STA 0x2120
-#define CMD 0x2144
-#define ROP 0x2148
-#define CLR 0x2160
-#define SR1 0x2100
-#define SR2 0x2104
-#define DR1 0x2108
-#define DR2 0x210C
-
-#define ROP_S 0xCC
static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
{
int v1 = (pitch >> 3) << 20;
- int tmp = 0, v2;
- switch (bpp) {
- case 8:
- tmp = 0;
- break;
- case 15:
- tmp = 5;
- break;
- case 16:
- tmp = 1;
- break;
- case 24:
- case 32:
- tmp = 2;
- break;
- }
- v2 = v1 | (tmp << 29);
+ int tmp = bpp == 24 ? 2 : (bpp >> 4);
+ int v2 = v1 | (tmp << 29);
+
writemmr(par, 0x21C0, v2);
writemmr(par, 0x21C4, v2);
writemmr(par, 0x21B8, v2);
@@ -237,29 +212,29 @@
static void blade_wait_engine(struct tridentfb_par *par)
{
- while (readmmr(par, STA) & 0xFA800000) ;
+ while (readmmr(par, STATUS) & 0xFA800000)
+ cpu_relax();
}
static void blade_fill_rect(struct tridentfb_par *par,
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
{
- writemmr(par, CLR, c);
- writemmr(par, ROP, rop ? 0x66 : ROP_S);
+ writemmr(par, COLOR, c);
+ writemmr(par, ROP, rop ? ROP_X : ROP_S);
writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
- writemmr(par, DR1, point(x, y));
- writemmr(par, DR2, point(x + w - 1, y + h - 1));
+ writemmr(par, DST1, point(x, y));
+ writemmr(par, DST2, point(x + w - 1, y + h - 1));
}
static void blade_copy_rect(struct tridentfb_par *par,
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
{
- u32 s1, s2, d1, d2;
int direction = 2;
- s1 = point(x1, y1);
- s2 = point(x1 + w - 1, y1 + h - 1);
- d1 = point(x2, y2);
- d2 = point(x2 + w - 1, y2 + h - 1);
+ u32 s1 = point(x1, y1);
+ u32 s2 = point(x1 + w - 1, y1 + h - 1);
+ u32 d1 = point(x2, y2);
+ u32 d2 = point(x2 + w - 1, y2 + h - 1);
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
direction = 0;
@@ -267,38 +242,20 @@
writemmr(par, ROP, ROP_S);
writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
- writemmr(par, SR1, direction ? s2 : s1);
- writemmr(par, SR2, direction ? s1 : s2);
- writemmr(par, DR1, direction ? d2 : d1);
- writemmr(par, DR2, direction ? d1 : d2);
+ writemmr(par, SRC1, direction ? s2 : s1);
+ writemmr(par, SRC2, direction ? s1 : s2);
+ writemmr(par, DST1, direction ? d2 : d1);
+ writemmr(par, DST2, direction ? d1 : d2);
}
/*
* BladeXP specific acceleration functions
*/
-#define ROP_P 0xF0
-#define masked_point(x, y) ((y & 0xffff)<<16|(x & 0xffff))
-
static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
{
- int tmp = 0, v1;
- unsigned char x = 0;
-
- switch (bpp) {
- case 8:
- x = 0;
- break;
- case 16:
- x = 1;
- break;
- case 24:
- x = 3;
- break;
- case 32:
- x = 2;
- break;
- }
+ unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
+ int v1 = pitch << (bpp == 24 ? 20 : (18 + x));
switch (pitch << (bpp >> 3)) {
case 8192:
@@ -320,22 +277,6 @@
eng_oper = x | 0x40;
- switch (bpp) {
- case 8:
- tmp = 18;
- break;
- case 15:
- case 16:
- tmp = 19;
- break;
- case 24:
- case 32:
- tmp = 20;
- break;
- }
-
- v1 = pitch << tmp;
-
writemmr(par, 0x2154, v1);
writemmr(par, 0x2150, v1);
t_outb(par, 3, 0x2126);
@@ -343,15 +284,11 @@
static void xp_wait_engine(struct tridentfb_par *par)
{
- int busy;
int count, timeout;
count = 0;
timeout = 0;
- for (;;) {
- busy = t_inb(par, STA) & 0x80;
- if (busy != 0x80)
- return;
+ while (t_inb(par, STATUS) & 0x80) {
count++;
if (count == 10000000) {
/* Timeout */
@@ -359,10 +296,11 @@
timeout++;
if (timeout == 8) {
/* Reset engine */
- t_outb(par, 0x00, 0x2120);
+ t_outb(par, 0x00, STATUS);
return;
}
}
+ cpu_relax();
}
}
@@ -371,10 +309,10 @@
{
writemmr(par, 0x2127, ROP_P);
writemmr(par, 0x2158, c);
- writemmr(par, 0x2128, 0x4000);
- writemmr(par, 0x2140, masked_point(h, w));
- writemmr(par, 0x2138, masked_point(y, x));
- t_outb(par, 0x01, 0x2124);
+ writemmr(par, DRAWFL, 0x4000);
+ writemmr(par, OLDDIM, point(h, w));
+ writemmr(par, OLDDST, point(y, x));
+ t_outb(par, 0x01, OLDCMD);
t_outb(par, eng_oper, 0x2125);
}
@@ -404,12 +342,12 @@
y2_tmp = y2;
}
- writemmr(par, 0x2128, direction);
+ writemmr(par, DRAWFL, direction);
t_outb(par, ROP_S, 0x2127);
- writemmr(par, 0x213C, masked_point(y1_tmp, x1_tmp));
- writemmr(par, 0x2138, masked_point(y2_tmp, x2_tmp));
- writemmr(par, 0x2140, masked_point(h, w));
- t_outb(par, 0x01, 0x2124);
+ writemmr(par, OLDSRC, point(y1_tmp, x1_tmp));
+ writemmr(par, OLDDST, point(y2_tmp, x2_tmp));
+ writemmr(par, OLDDIM, point(h, w));
+ t_outb(par, 0x01, OLDCMD);
}
/*
@@ -417,22 +355,8 @@
*/
static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
{
- int tmp = 0;
- switch (bpp) {
- case 8:
- tmp = 0;
- break;
- case 15:
- tmp = 5;
- break;
- case 16:
- tmp = 1;
- break;
- case 24:
- case 32:
- tmp = 2;
- break;
- }
+ int tmp = bpp == 24 ? 2: (bpp >> 4);
+
writemmr(par, 0x2120, 0xF0000000);
writemmr(par, 0x2120, 0x40000000 | tmp);
writemmr(par, 0x2120, 0x80000000);
@@ -450,7 +374,8 @@
static void image_wait_engine(struct tridentfb_par *par)
{
- while (readmmr(par, 0x2164) & 0xF0000000) ;
+ while (readmmr(par, 0x2164) & 0xF0000000)
+ cpu_relax();
}
static void image_fill_rect(struct tridentfb_par *par,
@@ -461,8 +386,8 @@
writemmr(par, 0x2144, c);
- writemmr(par, DR1, point(x, y));
- writemmr(par, DR2, point(x + w - 1, y + h - 1));
+ writemmr(par, DST1, point(x, y));
+ writemmr(par, DST2, point(x + w - 1, y + h - 1));
writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
}
@@ -470,12 +395,11 @@
static void image_copy_rect(struct tridentfb_par *par,
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
{
- u32 s1, s2, d1, d2;
int direction = 2;
- s1 = point(x1, y1);
- s2 = point(x1 + w - 1, y1 + h - 1);
- d1 = point(x2, y2);
- d2 = point(x2 + w - 1, y2 + h - 1);
+ u32 s1 = point(x1, y1);
+ u32 s2 = point(x1 + w - 1, y1 + h - 1);
+ u32 d1 = point(x2, y2);
+ u32 d2 = point(x2 + w - 1, y2 + h - 1);
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
direction = 0;
@@ -483,10 +407,10 @@
writemmr(par, 0x2120, 0x80000000);
writemmr(par, 0x2120, 0x90000000 | ROP_S);
- writemmr(par, SR1, direction ? s2 : s1);
- writemmr(par, SR2, direction ? s1 : s2);
- writemmr(par, DR1, direction ? d2 : d1);
- writemmr(par, DR2, direction ? d1 : d2);
+ writemmr(par, SRC1, direction ? s2 : s1);
+ writemmr(par, SRC2, direction ? s1 : s2);
+ writemmr(par, DST1, direction ? d2 : d1);
+ writemmr(par, DST2, direction ? d1 : d2);
writemmr(par, 0x2124,
0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
}
@@ -497,27 +421,12 @@
static void tgui_init_accel(struct tridentfb_par *par, int pitch, int bpp)
{
- unsigned char x = 0;
+ unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
/* disable clipping */
writemmr(par, 0x2148, 0);
writemmr(par, 0x214C, point(4095, 2047));
- switch (bpp) {
- case 8:
- x = 0;
- break;
- case 16:
- x = 1;
- break;
- case 24:
- x = 3;
- break;
- case 32:
- x = 2;
- break;
- }
-
switch ((pitch * bpp) / 8) {
case 8192:
case 512:
@@ -541,11 +450,11 @@
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
{
t_outb(par, ROP_P, 0x2127);
- writemmr(par, 0x212c, c);
- writemmr(par, 0x2128, 0x4020);
- writemmr(par, 0x2140, point(w - 1, h - 1));
- writemmr(par, 0x2138, point(x, y));
- t_outb(par, 1, 0x2124);
+ writemmr(par, OLDCLR, c);
+ writemmr(par, DRAWFL, 0x4020);
+ writemmr(par, OLDDIM, point(w - 1, h - 1));
+ writemmr(par, OLDDST, point(x, y));
+ t_outb(par, 1, OLDCMD);
}
static void tgui_copy_rect(struct tridentfb_par *par,
@@ -572,12 +481,12 @@
y2_tmp = y2;
}
- writemmr(par, 0x2128, 0x4 | flags);
+ writemmr(par, DRAWFL, 0x4 | flags);
t_outb(par, ROP_S, 0x2127);
- writemmr(par, 0x213C, point(x1_tmp, y1_tmp));
- writemmr(par, 0x2138, point(x2_tmp, y2_tmp));
- writemmr(par, 0x2140, point(w - 1, h - 1));
- t_outb(par, 1, 0x2124);
+ writemmr(par, OLDSRC, point(x1_tmp, y1_tmp));
+ writemmr(par, OLDDST, point(x2_tmp, y2_tmp));
+ writemmr(par, OLDDIM, point(w - 1, h - 1));
+ t_outb(par, 1, OLDCMD);
}
/*
@@ -588,37 +497,40 @@
const struct fb_fillrect *fr)
{
struct tridentfb_par *par = info->par;
- int bpp = info->var.bits_per_pixel;
- int col = 0;
+ int col;
- switch (bpp) {
- default:
- case 8:
- col |= fr->color;
+ if (info->var.bits_per_pixel == 8) {
+ col = fr->color;
col |= col << 8;
col |= col << 16;
- break;
- case 16:
+ } else
col = ((u32 *)(info->pseudo_palette))[fr->color];
- break;
- case 32:
- col = ((u32 *)(info->pseudo_palette))[fr->color];
- break;
- }
+ par->wait_engine(par);
par->fill_rect(par, fr->dx, fr->dy, fr->width,
fr->height, col, fr->rop);
- par->wait_engine(par);
}
+
static void tridentfb_copyarea(struct fb_info *info,
const struct fb_copyarea *ca)
{
struct tridentfb_par *par = info->par;
+ par->wait_engine(par);
par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
ca->width, ca->height);
- par->wait_engine(par);
}
+
+static int tridentfb_sync(struct fb_info *info)
+{
+ struct tridentfb_par *par = info->par;
+
+ par->wait_engine(par);
+ return 0;
+}
+#else
+#define tridentfb_fillrect cfb_fillrect
+#define tridentfb_copyarea cfb_copyarea
#endif /* CONFIG_FB_TRIDENT_ACCEL */
/*
@@ -921,6 +833,8 @@
/* check color depth */
if (bpp == 24)
bpp = var->bits_per_pixel = 32;
+ if (bpp != 8 && bpp != 16 && bpp != 32)
+ return -EINVAL;
if (par->chip_id == TGUI9440 && bpp == 32)
return -EINVAL;
/* check whether resolution fits on panel and in memory */
@@ -928,8 +842,15 @@
return -EINVAL;
/* various resolution checks */
var->xres = (var->xres + 7) & ~0x7;
- if (var->xres != var->xres_virtual)
+ if (var->xres > var->xres_virtual)
var->xres_virtual = var->xres;
+ if (var->yres > var->yres_virtual)
+ var->yres_virtual = var->yres;
+ if (var->xres_virtual > 4095 || var->yres > 2048)
+ return -EINVAL;
+ /* prevent from position overflow for acceleration */
+ if (var->yres_virtual > 0xffff)
+ return -EINVAL;
line_length = var->xres_virtual * bpp / 8;
#ifdef CONFIG_FB_TRIDENT_ACCEL
if (!is3Dchip(par->chip_id)) {
@@ -944,6 +865,8 @@
var->xres_virtual = 4096 * 8 / bpp;
else if (line_length <= 8192)
var->xres_virtual = 8192 * 8 / bpp;
+ else
+ return -EINVAL;
line_length = var->xres_virtual * bpp / 8;
}
@@ -1229,9 +1152,6 @@
case 8:
tmp = 0;
break;
- case 15:
- tmp = 0x10;
- break;
case 16:
tmp = 0x30;
break;
@@ -1352,10 +1272,11 @@
.fb_blank = tridentfb_blank,
.fb_check_var = tridentfb_check_var,
.fb_set_par = tridentfb_set_par,
-#ifdef CONFIG_FB_TRIDENT_ACCEL
.fb_fillrect = tridentfb_fillrect,
.fb_copyarea = tridentfb_copyarea,
.fb_imageblit = cfb_imageblit,
+#ifdef CONFIG_FB_TRIDENT_ACCEL
+ .fb_sync = tridentfb_sync,
#endif
};
@@ -1366,7 +1287,6 @@
unsigned char revision;
struct fb_info *info;
struct tridentfb_par *default_par;
- int defaultaccel;
int chip3D;
int chip_id;
@@ -1448,9 +1368,6 @@
default_par->chip_id = chip_id;
- /* acceleration is on by default for 3D chips */
- defaultaccel = chip3D && !noaccel;
-
/* setup MMIO region */
tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
tridentfb_fix.mmio_len = chip3D ? 0x20000 : 0x10000;
@@ -1515,7 +1432,7 @@
if (err < 0)
goto out_unmap2;
- if (defaultaccel && default_par->init_accel)
+ if (!noaccel && default_par->init_accel)
info->var.accel_flags |= FB_ACCELF_TEXT;
else
info->var.accel_flags &= ~FB_ACCELF_TEXT;