drivers/ide/pci/cs5535.c - kernel/msm-4.9 - Gitiles

 /*
  * linux/drivers/ide/pci/cs5535.c
  *
  * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  *
  * History:
  * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
  * - Reworked tuneproc, set_drive, misc mods to prep for mainline
  * - Work was sponsored by CIS (M) Sdn Bhd.
  * Ported to Kernel 2.6.11 on June 26, 2005 by
  *   Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
  *   Alexander Kiausch <alex.kiausch@t-online.de>
  * Originally developed by AMD for 2.4/2.6
  *
  * Development of this chipset driver was funded
  * by the nice folks at National Semiconductor/AMD.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  *
  * Documentation:
  *  CS5535 documentation available from AMD
  */

 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/ide.h>

 #include "ide-timing.h"

 #define MSR_ATAC_BASE		0x51300000
 #define ATAC_GLD_MSR_CAP	(MSR_ATAC_BASE+0)
 #define ATAC_GLD_MSR_CONFIG	(MSR_ATAC_BASE+0x01)
 #define ATAC_GLD_MSR_SMI	(MSR_ATAC_BASE+0x02)
 #define ATAC_GLD_MSR_ERROR	(MSR_ATAC_BASE+0x03)
 #define ATAC_GLD_MSR_PM		(MSR_ATAC_BASE+0x04)
 #define ATAC_GLD_MSR_DIAG	(MSR_ATAC_BASE+0x05)
 #define ATAC_IO_BAR		(MSR_ATAC_BASE+0x08)
 #define ATAC_RESET		(MSR_ATAC_BASE+0x10)
 #define ATAC_CH0D0_PIO		(MSR_ATAC_BASE+0x20)
 #define ATAC_CH0D0_DMA		(MSR_ATAC_BASE+0x21)
 #define ATAC_CH0D1_PIO		(MSR_ATAC_BASE+0x22)
 #define ATAC_CH0D1_DMA		(MSR_ATAC_BASE+0x23)
 #define ATAC_PCI_ABRTERR	(MSR_ATAC_BASE+0x24)
 #define ATAC_BM0_CMD_PRIM	0x00
 #define ATAC_BM0_STS_PRIM	0x02
 #define ATAC_BM0_PRD		0x04
 #define CS5535_CABLE_DETECT	0x48

 /* Format I PIO settings. We seperate out cmd and data for safer timings */

 static unsigned int cs5535_pio_cmd_timings[5] =
 { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
 static unsigned int cs5535_pio_dta_timings[5] =
 { 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };

 static unsigned int cs5535_mwdma_timings[3] =
 { 0x7F0FFFF3, 0x7F035352, 0x7f024241 };

 static unsigned int cs5535_udma_timings[5] =
 { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };

 /* Macros to check if the register is the reset value -  reset value is an
    invalid timing and indicates the register has not been set previously */

 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
 #define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )

 /****
  *	cs5535_set_speed         -     Configure the chipset to the new speed
  *	@drive: Drive to set up
  *	@speed: desired speed
  *
  *	cs5535_set_speed() configures the chipset to a new speed.
  */
 static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
 {

 	u32 reg = 0, dummy;
 	int unit = drive->select.b.unit;


 	/* Set the PIO timings */
 	if ((speed & XFER_MODE) == XFER_PIO) {
 		ide_drive_t *pair = &drive->hwif->drives[drive->dn ^ 1];
 		u8 cmd, pioa;

 		cmd = pioa = speed - XFER_PIO_0;

 		if (pair->present) {
 			u8 piob = ide_get_best_pio_mode(pair, 255, 4);

 			if (piob < cmd)
 				cmd = piob;
 		}

 		/* Write the speed of the current drive */
 		reg = (cs5535_pio_cmd_timings[cmd] << 16) |
 			cs5535_pio_dta_timings[pioa];
 		wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);

 		/* And if nessesary - change the speed of the other drive */
 		rdmsr(unit ?  ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);

 		if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
 			cs5535_pio_cmd_timings[cmd]) {
 			reg &= 0x0000FFFF;
 			reg |= cs5535_pio_cmd_timings[cmd] << 16;
 			wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
 		}

 		/* Set bit 31 of the DMA register for PIO format 1 timings */
 		rdmsr(unit ?  ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
 		wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
 					reg | 0x80000000UL, 0);
 	} else {
 		rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);

 		reg &= 0x80000000UL;  /* Preserve the PIO format bit */

 		if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
 			reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
 		else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
 			reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
 		else
 			return;

 		wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
 	}
 }

 /****
  *	cs5535_set_drive         -     Configure the drive to the new speed
  *	@drive: Drive to set up
  *	@speed: desired speed
  *
  *	cs5535_set_drive() configures the drive and the chipset to a
  *	new speed. It also can be called by upper layers.
  */
 static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
 {
 	speed = ide_rate_filter(drive, speed);
 	ide_config_drive_speed(drive, speed);
 	cs5535_set_speed(drive, speed);

 	return 0;
 }

 /****
  *	cs5535_tuneproc    -       PIO setup
  *	@drive: drive to set up
  *	@pio: mode to use (255 for 'best possible')
  *
  *	A callback from the upper layers for PIO-only tuning.
  */
 static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
 {
 	pio = ide_get_best_pio_mode(drive, pio, 4);
 	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 	cs5535_set_speed(drive, XFER_PIO_0 + pio);
 }

 static int cs5535_dma_check(ide_drive_t *drive)
 {
 	drive->init_speed = 0;

 	if (ide_tune_dma(drive))
 		return 0;

 	if (ide_use_fast_pio(drive))
 		cs5535_tuneproc(drive, 255);

 	return -1;
 }

 static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
 {
 	u8 bit;

 	/* if a 80 wire cable was detected */
 	pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);

 	return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }

 /****
  *	init_hwif_cs5535        -       Initialize one ide cannel
  *	@hwif: Channel descriptor
  *
  *	This gets invoked by the IDE driver once for each channel. It
  *	performs channel-specific pre-initialization before drive probing.
  *
  */
 static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
 {
 	int i;

 	hwif->autodma = 0;

 	hwif->tuneproc = &cs5535_tuneproc;
 	hwif->speedproc = &cs5535_set_drive;
 	hwif->ide_dma_check = &cs5535_dma_check;

 	hwif->atapi_dma = 1;
 	hwif->ultra_mask = 0x1F;
 	hwif->mwdma_mask = 0x07;

 	hwif->cbl = cs5535_cable_detect(hwif->pci_dev);

 	if (!noautodma)
 		hwif->autodma = 1;

 	/* just setting autotune and not worrying about bios timings */
 	for (i = 0; i < 2; i++) {
 		hwif->drives[i].autotune = 1;
 		hwif->drives[i].autodma = hwif->autodma;
 	}
 }

 static ide_pci_device_t cs5535_chipset __devinitdata = {
 	.name		= "CS5535",
 	.init_hwif	= init_hwif_cs5535,
 	.autodma	= AUTODMA,
 	.bootable	= ON_BOARD,
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.pio_mask	= ATA_PIO4,
 };

 static int __devinit cs5535_init_one(struct pci_dev *dev,
 					const struct pci_device_id *id)
 {
 	return ide_setup_pci_device(dev, &cs5535_chipset);
 }

 static struct pci_device_id cs5535_pci_tbl[] =
 {
 	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID,
 		PCI_ANY_ID, 0, 0, 0},
 	{ 0, },
 };

 MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);

 static struct pci_driver driver = {
 	.name       = "CS5535_IDE",
 	.id_table   = cs5535_pci_tbl,
 	.probe      = cs5535_init_one,
 };

 static int __init cs5535_ide_init(void)
 {
 	return ide_pci_register_driver(&driver);
 }

 module_init(cs5535_ide_init);

 MODULE_AUTHOR("AMD");
 MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
 MODULE_LICENSE("GPL");
	/*
	* linux/drivers/ide/pci/cs5535.c
	*
	* Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
	* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
	*
	* History:
	* 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
	* - Reworked tuneproc, set_drive, misc mods to prep for mainline
	* - Work was sponsored by CIS (M) Sdn Bhd.
	* Ported to Kernel 2.6.11 on June 26, 2005 by
	* Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
	* Alexander Kiausch <alex.kiausch@t-online.de>
	* Originally developed by AMD for 2.4/2.6
	*
	* Development of this chipset driver was funded
	* by the nice folks at National Semiconductor/AMD.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published by
	* the Free Software Foundation.
	*
	* Documentation:
	* CS5535 documentation available from AMD
	*/

	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/ide.h>

	#include "ide-timing.h"

	#define MSR_ATAC_BASE 0x51300000
	#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
	#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
	#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
	#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
	#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
	#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
	#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
	#define ATAC_RESET (MSR_ATAC_BASE+0x10)
	#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
	#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
	#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
	#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
	#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
	#define ATAC_BM0_CMD_PRIM 0x00
	#define ATAC_BM0_STS_PRIM 0x02
	#define ATAC_BM0_PRD 0x04
	#define CS5535_CABLE_DETECT 0x48

	/* Format I PIO settings. We seperate out cmd and data for safer timings */

	static unsigned int cs5535_pio_cmd_timings[5] =
	{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
	static unsigned int cs5535_pio_dta_timings[5] =
	{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };

	static unsigned int cs5535_mwdma_timings[3] =
	{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };

	static unsigned int cs5535_udma_timings[5] =
	{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };

	/* Macros to check if the register is the reset value - reset value is an
	invalid timing and indicates the register has not been set previously */

	#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
	#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )

	/****
	* cs5535_set_speed - Configure the chipset to the new speed
	* @drive: Drive to set up
	* @speed: desired speed
	*
	* cs5535_set_speed() configures the chipset to a new speed.
	*/
	static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
	{

	u32 reg = 0, dummy;
	int unit = drive->select.b.unit;


	/* Set the PIO timings */
	if ((speed & XFER_MODE) == XFER_PIO) {
	ide_drive_t *pair = &drive->hwif->drives[drive->dn ^ 1];
	u8 cmd, pioa;

	cmd = pioa = speed - XFER_PIO_0;

	if (pair->present) {
	u8 piob = ide_get_best_pio_mode(pair, 255, 4);

	if (piob < cmd)
	cmd = piob;
	}

	/* Write the speed of the current drive */
	reg = (cs5535_pio_cmd_timings[cmd] << 16) \|
	cs5535_pio_dta_timings[pioa];
	wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);

	/* And if nessesary - change the speed of the other drive */
	rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);

	if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
	cs5535_pio_cmd_timings[cmd]) {
	reg &= 0x0000FFFF;
	reg \|= cs5535_pio_cmd_timings[cmd] << 16;
	wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
	}

	/* Set bit 31 of the DMA register for PIO format 1 timings */
	rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
	wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
	reg \| 0x80000000UL, 0);
	} else {
	rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);

	reg &= 0x80000000UL; /* Preserve the PIO format bit */

	if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
	reg \|= cs5535_udma_timings[speed - XFER_UDMA_0];
	else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
	reg \|= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
	else
	return;

	wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
	}
	}

	/****
	* cs5535_set_drive - Configure the drive to the new speed
	* @drive: Drive to set up
	* @speed: desired speed
	*
	* cs5535_set_drive() configures the drive and the chipset to a
	* new speed. It also can be called by upper layers.
	*/
	static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
	{
	speed = ide_rate_filter(drive, speed);
	ide_config_drive_speed(drive, speed);
	cs5535_set_speed(drive, speed);

	return 0;
	}

	/****
	* cs5535_tuneproc - PIO setup
	* @drive: drive to set up
	* @pio: mode to use (255 for 'best possible')
	*
	* A callback from the upper layers for PIO-only tuning.
	*/
	static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
	{
	pio = ide_get_best_pio_mode(drive, pio, 4);
	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
	cs5535_set_speed(drive, XFER_PIO_0 + pio);
	}

	static int cs5535_dma_check(ide_drive_t *drive)
	{
	drive->init_speed = 0;

	if (ide_tune_dma(drive))
	return 0;

	if (ide_use_fast_pio(drive))
	cs5535_tuneproc(drive, 255);

	return -1;
	}

	static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
	{
	u8 bit;

	/* if a 80 wire cable was detected */
	pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);

	return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
	}

	/****
	* init_hwif_cs5535 - Initialize one ide cannel
	* @hwif: Channel descriptor
	*
	* This gets invoked by the IDE driver once for each channel. It
	* performs channel-specific pre-initialization before drive probing.
	*
	*/
	static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
	{
	int i;

	hwif->autodma = 0;

	hwif->tuneproc = &cs5535_tuneproc;
	hwif->speedproc = &cs5535_set_drive;
	hwif->ide_dma_check = &cs5535_dma_check;

	hwif->atapi_dma = 1;
	hwif->ultra_mask = 0x1F;
	hwif->mwdma_mask = 0x07;

	hwif->cbl = cs5535_cable_detect(hwif->pci_dev);

	if (!noautodma)
	hwif->autodma = 1;

	/* just setting autotune and not worrying about bios timings */
	for (i = 0; i < 2; i++) {
	hwif->drives[i].autotune = 1;
	hwif->drives[i].autodma = hwif->autodma;
	}
	}

	static ide_pci_device_t cs5535_chipset __devinitdata = {
	.name = "CS5535",
	.init_hwif = init_hwif_cs5535,
	.autodma = AUTODMA,
	.bootable = ON_BOARD,
	.host_flags = IDE_HFLAG_SINGLE,
	.pio_mask = ATA_PIO4,
	};

	static int __devinit cs5535_init_one(struct pci_dev *dev,
	const struct pci_device_id *id)
	{
	return ide_setup_pci_device(dev, &cs5535_chipset);
	}

	static struct pci_device_id cs5535_pci_tbl[] =
	{
	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID,
	PCI_ANY_ID, 0, 0, 0},
	{ 0, },
	};

	MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);

	static struct pci_driver driver = {
	.name = "CS5535_IDE",
	.id_table = cs5535_pci_tbl,
	.probe = cs5535_init_one,
	};

	static int __init cs5535_ide_init(void)
	{
	return ide_pci_register_driver(&driver);
	}

	module_init(cs5535_ide_init);

	MODULE_AUTHOR("AMD");
	MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
	MODULE_LICENSE("GPL");