| /* |
| * thermal.c - Generic Thermal Management Sysfs support. |
| * |
| * Copyright (C) 2008 Intel Corp |
| * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> |
| * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/kdev_t.h> |
| #include <linux/idr.h> |
| #include <linux/thermal.h> |
| #include <linux/spinlock.h> |
| #include <linux/reboot.h> |
| #include <net/netlink.h> |
| #include <net/genetlink.h> |
| |
| MODULE_AUTHOR("Zhang Rui"); |
| MODULE_DESCRIPTION("Generic thermal management sysfs support"); |
| MODULE_LICENSE("GPL"); |
| |
| #define PREFIX "Thermal: " |
| |
| struct thermal_cooling_device_instance { |
| int id; |
| char name[THERMAL_NAME_LENGTH]; |
| struct thermal_zone_device *tz; |
| struct thermal_cooling_device *cdev; |
| int trip; |
| char attr_name[THERMAL_NAME_LENGTH]; |
| struct device_attribute attr; |
| struct list_head node; |
| }; |
| |
| static DEFINE_IDR(thermal_tz_idr); |
| static DEFINE_IDR(thermal_cdev_idr); |
| static DEFINE_MUTEX(thermal_idr_lock); |
| |
| static LIST_HEAD(thermal_tz_list); |
| static LIST_HEAD(thermal_cdev_list); |
| static DEFINE_MUTEX(thermal_list_lock); |
| |
| static unsigned int thermal_event_seqnum; |
| |
| static int get_idr(struct idr *idr, struct mutex *lock, int *id) |
| { |
| int err; |
| |
| again: |
| if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) |
| return -ENOMEM; |
| |
| if (lock) |
| mutex_lock(lock); |
| err = idr_get_new(idr, NULL, id); |
| if (lock) |
| mutex_unlock(lock); |
| if (unlikely(err == -EAGAIN)) |
| goto again; |
| else if (unlikely(err)) |
| return err; |
| |
| *id = *id & MAX_ID_MASK; |
| return 0; |
| } |
| |
| static void release_idr(struct idr *idr, struct mutex *lock, int id) |
| { |
| if (lock) |
| mutex_lock(lock); |
| idr_remove(idr, id); |
| if (lock) |
| mutex_unlock(lock); |
| } |
| |
| /* sys I/F for thermal zone */ |
| |
| #define to_thermal_zone(_dev) \ |
| container_of(_dev, struct thermal_zone_device, device) |
| |
| static ssize_t |
| type_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| |
| return sprintf(buf, "%s\n", tz->type); |
| } |
| |
| static ssize_t |
| temp_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| long temperature; |
| int ret; |
| |
| if (!tz->ops->get_temp) |
| return -EPERM; |
| |
| ret = tz->ops->get_temp(tz, &temperature); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%ld\n", temperature); |
| } |
| |
| static ssize_t |
| mode_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| enum thermal_device_mode mode; |
| int result; |
| |
| if (!tz->ops->get_mode) |
| return -EPERM; |
| |
| result = tz->ops->get_mode(tz, &mode); |
| if (result) |
| return result; |
| |
| return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" |
| : "disabled"); |
| } |
| |
| static ssize_t |
| mode_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| int result; |
| |
| if (!tz->ops->set_mode) |
| return -EPERM; |
| |
| if (!strncmp(buf, "enabled", sizeof("enabled"))) |
| result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); |
| else if (!strncmp(buf, "disabled", sizeof("disabled"))) |
| result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); |
| else |
| result = -EINVAL; |
| |
| if (result) |
| return result; |
| |
| return count; |
| } |
| |
| static ssize_t |
| trip_point_type_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| enum thermal_trip_type type; |
| int trip, result; |
| |
| if (!tz->ops->get_trip_type) |
| return -EPERM; |
| |
| if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) |
| return -EINVAL; |
| |
| result = tz->ops->get_trip_type(tz, trip, &type); |
| if (result) |
| return result; |
| |
| switch (type) { |
| case THERMAL_TRIP_CRITICAL: |
| return sprintf(buf, "critical\n"); |
| case THERMAL_TRIP_HOT: |
| return sprintf(buf, "hot\n"); |
| case THERMAL_TRIP_PASSIVE: |
| return sprintf(buf, "passive\n"); |
| case THERMAL_TRIP_ACTIVE: |
| return sprintf(buf, "active\n"); |
| default: |
| return sprintf(buf, "unknown\n"); |
| } |
| } |
| |
| static ssize_t |
| trip_point_temp_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| int trip, ret; |
| long temperature; |
| |
| if (!tz->ops->get_trip_temp) |
| return -EPERM; |
| |
| if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) |
| return -EINVAL; |
| |
| ret = tz->ops->get_trip_temp(tz, trip, &temperature); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%ld\n", temperature); |
| } |
| |
| static ssize_t |
| passive_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| struct thermal_cooling_device *cdev = NULL; |
| int state; |
| |
| if (!sscanf(buf, "%d\n", &state)) |
| return -EINVAL; |
| |
| /* sanity check: values below 1000 millicelcius don't make sense |
| * and can cause the system to go into a thermal heart attack |
| */ |
| if (state && state < 1000) |
| return -EINVAL; |
| |
| if (state && !tz->forced_passive) { |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(cdev, &thermal_cdev_list, node) { |
| if (!strncmp("Processor", cdev->type, |
| sizeof("Processor"))) |
| thermal_zone_bind_cooling_device(tz, |
| THERMAL_TRIPS_NONE, |
| cdev); |
| } |
| mutex_unlock(&thermal_list_lock); |
| if (!tz->passive_delay) |
| tz->passive_delay = 1000; |
| } else if (!state && tz->forced_passive) { |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(cdev, &thermal_cdev_list, node) { |
| if (!strncmp("Processor", cdev->type, |
| sizeof("Processor"))) |
| thermal_zone_unbind_cooling_device(tz, |
| THERMAL_TRIPS_NONE, |
| cdev); |
| } |
| mutex_unlock(&thermal_list_lock); |
| tz->passive_delay = 0; |
| } |
| |
| tz->tc1 = 1; |
| tz->tc2 = 1; |
| |
| tz->forced_passive = state; |
| |
| thermal_zone_device_update(tz); |
| |
| return count; |
| } |
| |
| static ssize_t |
| passive_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct thermal_zone_device *tz = to_thermal_zone(dev); |
| |
| return sprintf(buf, "%d\n", tz->forced_passive); |
| } |
| |
| static DEVICE_ATTR(type, 0444, type_show, NULL); |
| static DEVICE_ATTR(temp, 0444, temp_show, NULL); |
| static DEVICE_ATTR(mode, 0644, mode_show, mode_store); |
| static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ |
| passive_store); |
| |
| static struct device_attribute trip_point_attrs[] = { |
| __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL), |
| __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL), |
| __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), |
| }; |
| |
| #define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ |
| do { \ |
| result = device_create_file(_dev, \ |
| &trip_point_attrs[_index * 2]); \ |
| if (result) \ |
| break; \ |
| result = device_create_file(_dev, \ |
| &trip_point_attrs[_index * 2 + 1]); \ |
| } while (0) |
| |
| #define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ |
| do { \ |
| device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ |
| device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ |
| } while (0) |
| |
| /* sys I/F for cooling device */ |
| #define to_cooling_device(_dev) \ |
| container_of(_dev, struct thermal_cooling_device, device) |
| |
| static ssize_t |
| thermal_cooling_device_type_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct thermal_cooling_device *cdev = to_cooling_device(dev); |
| |
| return sprintf(buf, "%s\n", cdev->type); |
| } |
| |
| static ssize_t |
| thermal_cooling_device_max_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct thermal_cooling_device *cdev = to_cooling_device(dev); |
| unsigned long state; |
| int ret; |
| |
| ret = cdev->ops->get_max_state(cdev, &state); |
| if (ret) |
| return ret; |
| return sprintf(buf, "%ld\n", state); |
| } |
| |
| static ssize_t |
| thermal_cooling_device_cur_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct thermal_cooling_device *cdev = to_cooling_device(dev); |
| unsigned long state; |
| int ret; |
| |
| ret = cdev->ops->get_cur_state(cdev, &state); |
| if (ret) |
| return ret; |
| return sprintf(buf, "%ld\n", state); |
| } |
| |
| static ssize_t |
| thermal_cooling_device_cur_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct thermal_cooling_device *cdev = to_cooling_device(dev); |
| unsigned long state; |
| int result; |
| |
| if (!sscanf(buf, "%ld\n", &state)) |
| return -EINVAL; |
| |
| if ((long)state < 0) |
| return -EINVAL; |
| |
| result = cdev->ops->set_cur_state(cdev, state); |
| if (result) |
| return result; |
| return count; |
| } |
| |
| static struct device_attribute dev_attr_cdev_type = |
| __ATTR(type, 0444, thermal_cooling_device_type_show, NULL); |
| static DEVICE_ATTR(max_state, 0444, |
| thermal_cooling_device_max_state_show, NULL); |
| static DEVICE_ATTR(cur_state, 0644, |
| thermal_cooling_device_cur_state_show, |
| thermal_cooling_device_cur_state_store); |
| |
| static ssize_t |
| thermal_cooling_device_trip_point_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct thermal_cooling_device_instance *instance; |
| |
| instance = |
| container_of(attr, struct thermal_cooling_device_instance, attr); |
| |
| if (instance->trip == THERMAL_TRIPS_NONE) |
| return sprintf(buf, "-1\n"); |
| else |
| return sprintf(buf, "%d\n", instance->trip); |
| } |
| |
| /* Device management */ |
| |
| #if defined(CONFIG_THERMAL_HWMON) |
| |
| /* hwmon sys I/F */ |
| #include <linux/hwmon.h> |
| |
| /* thermal zone devices with the same type share one hwmon device */ |
| struct thermal_hwmon_device { |
| char type[THERMAL_NAME_LENGTH]; |
| struct device *device; |
| int count; |
| struct list_head tz_list; |
| struct list_head node; |
| }; |
| |
| struct thermal_hwmon_attr { |
| struct device_attribute attr; |
| char name[16]; |
| }; |
| |
| /* one temperature input for each thermal zone */ |
| struct thermal_hwmon_temp { |
| struct list_head hwmon_node; |
| struct thermal_zone_device *tz; |
| struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ |
| struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ |
| }; |
| |
| static LIST_HEAD(thermal_hwmon_list); |
| |
| static ssize_t |
| name_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev); |
| return sprintf(buf, "%s\n", hwmon->type); |
| } |
| static DEVICE_ATTR(name, 0444, name_show, NULL); |
| |
| static ssize_t |
| temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| long temperature; |
| int ret; |
| struct thermal_hwmon_attr *hwmon_attr |
| = container_of(attr, struct thermal_hwmon_attr, attr); |
| struct thermal_hwmon_temp *temp |
| = container_of(hwmon_attr, struct thermal_hwmon_temp, |
| temp_input); |
| struct thermal_zone_device *tz = temp->tz; |
| |
| ret = tz->ops->get_temp(tz, &temperature); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%ld\n", temperature); |
| } |
| |
| static ssize_t |
| temp_crit_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct thermal_hwmon_attr *hwmon_attr |
| = container_of(attr, struct thermal_hwmon_attr, attr); |
| struct thermal_hwmon_temp *temp |
| = container_of(hwmon_attr, struct thermal_hwmon_temp, |
| temp_crit); |
| struct thermal_zone_device *tz = temp->tz; |
| long temperature; |
| int ret; |
| |
| ret = tz->ops->get_trip_temp(tz, 0, &temperature); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%ld\n", temperature); |
| } |
| |
| |
| static struct thermal_hwmon_device * |
| thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) |
| { |
| struct thermal_hwmon_device *hwmon; |
| |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(hwmon, &thermal_hwmon_list, node) |
| if (!strcmp(hwmon->type, tz->type)) { |
| mutex_unlock(&thermal_list_lock); |
| return hwmon; |
| } |
| mutex_unlock(&thermal_list_lock); |
| |
| return NULL; |
| } |
| |
| /* Find the temperature input matching a given thermal zone */ |
| static struct thermal_hwmon_temp * |
| thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, |
| const struct thermal_zone_device *tz) |
| { |
| struct thermal_hwmon_temp *temp; |
| |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(temp, &hwmon->tz_list, hwmon_node) |
| if (temp->tz == tz) { |
| mutex_unlock(&thermal_list_lock); |
| return temp; |
| } |
| mutex_unlock(&thermal_list_lock); |
| |
| return NULL; |
| } |
| |
| static int |
| thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) |
| { |
| struct thermal_hwmon_device *hwmon; |
| struct thermal_hwmon_temp *temp; |
| int new_hwmon_device = 1; |
| int result; |
| |
| hwmon = thermal_hwmon_lookup_by_type(tz); |
| if (hwmon) { |
| new_hwmon_device = 0; |
| goto register_sys_interface; |
| } |
| |
| hwmon = kzalloc(sizeof(struct thermal_hwmon_device), GFP_KERNEL); |
| if (!hwmon) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&hwmon->tz_list); |
| strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH); |
| hwmon->device = hwmon_device_register(NULL); |
| if (IS_ERR(hwmon->device)) { |
| result = PTR_ERR(hwmon->device); |
| goto free_mem; |
| } |
| dev_set_drvdata(hwmon->device, hwmon); |
| result = device_create_file(hwmon->device, &dev_attr_name); |
| if (result) |
| goto free_mem; |
| |
| register_sys_interface: |
| temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL); |
| if (!temp) { |
| result = -ENOMEM; |
| goto unregister_name; |
| } |
| |
| temp->tz = tz; |
| hwmon->count++; |
| |
| snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH, |
| "temp%d_input", hwmon->count); |
| temp->temp_input.attr.attr.name = temp->temp_input.name; |
| temp->temp_input.attr.attr.mode = 0444; |
| temp->temp_input.attr.show = temp_input_show; |
| sysfs_attr_init(&temp->temp_input.attr.attr); |
| result = device_create_file(hwmon->device, &temp->temp_input.attr); |
| if (result) |
| goto free_temp_mem; |
| |
| if (tz->ops->get_crit_temp) { |
| unsigned long temperature; |
| if (!tz->ops->get_crit_temp(tz, &temperature)) { |
| snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH, |
| "temp%d_crit", hwmon->count); |
| temp->temp_crit.attr.attr.name = temp->temp_crit.name; |
| temp->temp_crit.attr.attr.mode = 0444; |
| temp->temp_crit.attr.show = temp_crit_show; |
| sysfs_attr_init(&temp->temp_crit.attr.attr); |
| result = device_create_file(hwmon->device, |
| &temp->temp_crit.attr); |
| if (result) |
| goto unregister_input; |
| } |
| } |
| |
| mutex_lock(&thermal_list_lock); |
| if (new_hwmon_device) |
| list_add_tail(&hwmon->node, &thermal_hwmon_list); |
| list_add_tail(&temp->hwmon_node, &hwmon->tz_list); |
| mutex_unlock(&thermal_list_lock); |
| |
| return 0; |
| |
| unregister_input: |
| device_remove_file(hwmon->device, &temp->temp_input.attr); |
| free_temp_mem: |
| kfree(temp); |
| unregister_name: |
| if (new_hwmon_device) { |
| device_remove_file(hwmon->device, &dev_attr_name); |
| hwmon_device_unregister(hwmon->device); |
| } |
| free_mem: |
| if (new_hwmon_device) |
| kfree(hwmon); |
| |
| return result; |
| } |
| |
| static void |
| thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) |
| { |
| struct thermal_hwmon_device *hwmon; |
| struct thermal_hwmon_temp *temp; |
| |
| hwmon = thermal_hwmon_lookup_by_type(tz); |
| if (unlikely(!hwmon)) { |
| /* Should never happen... */ |
| dev_dbg(&tz->device, "hwmon device lookup failed!\n"); |
| return; |
| } |
| |
| temp = thermal_hwmon_lookup_temp(hwmon, tz); |
| if (unlikely(!temp)) { |
| /* Should never happen... */ |
| dev_dbg(&tz->device, "temperature input lookup failed!\n"); |
| return; |
| } |
| |
| device_remove_file(hwmon->device, &temp->temp_input.attr); |
| if (tz->ops->get_crit_temp) |
| device_remove_file(hwmon->device, &temp->temp_crit.attr); |
| |
| mutex_lock(&thermal_list_lock); |
| list_del(&temp->hwmon_node); |
| kfree(temp); |
| if (!list_empty(&hwmon->tz_list)) { |
| mutex_unlock(&thermal_list_lock); |
| return; |
| } |
| list_del(&hwmon->node); |
| mutex_unlock(&thermal_list_lock); |
| |
| device_remove_file(hwmon->device, &dev_attr_name); |
| hwmon_device_unregister(hwmon->device); |
| kfree(hwmon); |
| } |
| #else |
| static int |
| thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) |
| { |
| return 0; |
| } |
| |
| static void |
| thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) |
| { |
| } |
| #endif |
| |
| static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, |
| int delay) |
| { |
| cancel_delayed_work(&(tz->poll_queue)); |
| |
| if (!delay) |
| return; |
| |
| if (delay > 1000) |
| queue_delayed_work(system_freezable_wq, &(tz->poll_queue), |
| round_jiffies(msecs_to_jiffies(delay))); |
| else |
| queue_delayed_work(system_freezable_wq, &(tz->poll_queue), |
| msecs_to_jiffies(delay)); |
| } |
| |
| static void thermal_zone_device_passive(struct thermal_zone_device *tz, |
| int temp, int trip_temp, int trip) |
| { |
| int trend = 0; |
| struct thermal_cooling_device_instance *instance; |
| struct thermal_cooling_device *cdev; |
| long state, max_state; |
| |
| /* |
| * Above Trip? |
| * ----------- |
| * Calculate the thermal trend (using the passive cooling equation) |
| * and modify the performance limit for all passive cooling devices |
| * accordingly. Note that we assume symmetry. |
| */ |
| if (temp >= trip_temp) { |
| tz->passive = true; |
| |
| trend = (tz->tc1 * (temp - tz->last_temperature)) + |
| (tz->tc2 * (temp - trip_temp)); |
| |
| /* Heating up? */ |
| if (trend > 0) { |
| list_for_each_entry(instance, &tz->cooling_devices, |
| node) { |
| if (instance->trip != trip) |
| continue; |
| cdev = instance->cdev; |
| cdev->ops->get_cur_state(cdev, &state); |
| cdev->ops->get_max_state(cdev, &max_state); |
| if (state++ < max_state) |
| cdev->ops->set_cur_state(cdev, state); |
| } |
| } else if (trend < 0) { /* Cooling off? */ |
| list_for_each_entry(instance, &tz->cooling_devices, |
| node) { |
| if (instance->trip != trip) |
| continue; |
| cdev = instance->cdev; |
| cdev->ops->get_cur_state(cdev, &state); |
| cdev->ops->get_max_state(cdev, &max_state); |
| if (state > 0) |
| cdev->ops->set_cur_state(cdev, --state); |
| } |
| } |
| return; |
| } |
| |
| /* |
| * Below Trip? |
| * ----------- |
| * Implement passive cooling hysteresis to slowly increase performance |
| * and avoid thrashing around the passive trip point. Note that we |
| * assume symmetry. |
| */ |
| list_for_each_entry(instance, &tz->cooling_devices, node) { |
| if (instance->trip != trip) |
| continue; |
| cdev = instance->cdev; |
| cdev->ops->get_cur_state(cdev, &state); |
| cdev->ops->get_max_state(cdev, &max_state); |
| if (state > 0) |
| cdev->ops->set_cur_state(cdev, --state); |
| if (state == 0) |
| tz->passive = false; |
| } |
| } |
| |
| static void thermal_zone_device_check(struct work_struct *work) |
| { |
| struct thermal_zone_device *tz = container_of(work, struct |
| thermal_zone_device, |
| poll_queue.work); |
| thermal_zone_device_update(tz); |
| } |
| |
| /** |
| * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone |
| * @tz: thermal zone device |
| * @trip: indicates which trip point the cooling devices is |
| * associated with in this thermal zone. |
| * @cdev: thermal cooling device |
| * |
| * This function is usually called in the thermal zone device .bind callback. |
| */ |
| int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, |
| int trip, |
| struct thermal_cooling_device *cdev) |
| { |
| struct thermal_cooling_device_instance *dev; |
| struct thermal_cooling_device_instance *pos; |
| struct thermal_zone_device *pos1; |
| struct thermal_cooling_device *pos2; |
| int result; |
| |
| if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) |
| return -EINVAL; |
| |
| list_for_each_entry(pos1, &thermal_tz_list, node) { |
| if (pos1 == tz) |
| break; |
| } |
| list_for_each_entry(pos2, &thermal_cdev_list, node) { |
| if (pos2 == cdev) |
| break; |
| } |
| |
| if (tz != pos1 || cdev != pos2) |
| return -EINVAL; |
| |
| dev = |
| kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| dev->tz = tz; |
| dev->cdev = cdev; |
| dev->trip = trip; |
| result = get_idr(&tz->idr, &tz->lock, &dev->id); |
| if (result) |
| goto free_mem; |
| |
| sprintf(dev->name, "cdev%d", dev->id); |
| result = |
| sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name); |
| if (result) |
| goto release_idr; |
| |
| sprintf(dev->attr_name, "cdev%d_trip_point", dev->id); |
| sysfs_attr_init(&dev->attr.attr); |
| dev->attr.attr.name = dev->attr_name; |
| dev->attr.attr.mode = 0444; |
| dev->attr.show = thermal_cooling_device_trip_point_show; |
| result = device_create_file(&tz->device, &dev->attr); |
| if (result) |
| goto remove_symbol_link; |
| |
| mutex_lock(&tz->lock); |
| list_for_each_entry(pos, &tz->cooling_devices, node) |
| if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { |
| result = -EEXIST; |
| break; |
| } |
| if (!result) |
| list_add_tail(&dev->node, &tz->cooling_devices); |
| mutex_unlock(&tz->lock); |
| |
| if (!result) |
| return 0; |
| |
| device_remove_file(&tz->device, &dev->attr); |
| remove_symbol_link: |
| sysfs_remove_link(&tz->device.kobj, dev->name); |
| release_idr: |
| release_idr(&tz->idr, &tz->lock, dev->id); |
| free_mem: |
| kfree(dev); |
| return result; |
| } |
| |
| EXPORT_SYMBOL(thermal_zone_bind_cooling_device); |
| |
| /** |
| * thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone |
| * @tz: thermal zone device |
| * @trip: indicates which trip point the cooling devices is |
| * associated with in this thermal zone. |
| * @cdev: thermal cooling device |
| * |
| * This function is usually called in the thermal zone device .unbind callback. |
| */ |
| int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, |
| int trip, |
| struct thermal_cooling_device *cdev) |
| { |
| struct thermal_cooling_device_instance *pos, *next; |
| |
| mutex_lock(&tz->lock); |
| list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) { |
| if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { |
| list_del(&pos->node); |
| mutex_unlock(&tz->lock); |
| goto unbind; |
| } |
| } |
| mutex_unlock(&tz->lock); |
| |
| return -ENODEV; |
| |
| unbind: |
| device_remove_file(&tz->device, &pos->attr); |
| sysfs_remove_link(&tz->device.kobj, pos->name); |
| release_idr(&tz->idr, &tz->lock, pos->id); |
| kfree(pos); |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); |
| |
| static void thermal_release(struct device *dev) |
| { |
| struct thermal_zone_device *tz; |
| struct thermal_cooling_device *cdev; |
| |
| if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) { |
| tz = to_thermal_zone(dev); |
| kfree(tz); |
| } else { |
| cdev = to_cooling_device(dev); |
| kfree(cdev); |
| } |
| } |
| |
| static struct class thermal_class = { |
| .name = "thermal", |
| .dev_release = thermal_release, |
| }; |
| |
| /** |
| * thermal_cooling_device_register - register a new thermal cooling device |
| * @type: the thermal cooling device type. |
| * @devdata: device private data. |
| * @ops: standard thermal cooling devices callbacks. |
| */ |
| struct thermal_cooling_device *thermal_cooling_device_register( |
| char *type, void *devdata, const struct thermal_cooling_device_ops *ops) |
| { |
| struct thermal_cooling_device *cdev; |
| struct thermal_zone_device *pos; |
| int result; |
| |
| if (strlen(type) >= THERMAL_NAME_LENGTH) |
| return ERR_PTR(-EINVAL); |
| |
| if (!ops || !ops->get_max_state || !ops->get_cur_state || |
| !ops->set_cur_state) |
| return ERR_PTR(-EINVAL); |
| |
| cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL); |
| if (!cdev) |
| return ERR_PTR(-ENOMEM); |
| |
| result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id); |
| if (result) { |
| kfree(cdev); |
| return ERR_PTR(result); |
| } |
| |
| strcpy(cdev->type, type); |
| cdev->ops = ops; |
| cdev->device.class = &thermal_class; |
| cdev->devdata = devdata; |
| dev_set_name(&cdev->device, "cooling_device%d", cdev->id); |
| result = device_register(&cdev->device); |
| if (result) { |
| release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); |
| kfree(cdev); |
| return ERR_PTR(result); |
| } |
| |
| /* sys I/F */ |
| if (type) { |
| result = device_create_file(&cdev->device, &dev_attr_cdev_type); |
| if (result) |
| goto unregister; |
| } |
| |
| result = device_create_file(&cdev->device, &dev_attr_max_state); |
| if (result) |
| goto unregister; |
| |
| result = device_create_file(&cdev->device, &dev_attr_cur_state); |
| if (result) |
| goto unregister; |
| |
| mutex_lock(&thermal_list_lock); |
| list_add(&cdev->node, &thermal_cdev_list); |
| list_for_each_entry(pos, &thermal_tz_list, node) { |
| if (!pos->ops->bind) |
| continue; |
| result = pos->ops->bind(pos, cdev); |
| if (result) |
| break; |
| |
| } |
| mutex_unlock(&thermal_list_lock); |
| |
| if (!result) |
| return cdev; |
| |
| unregister: |
| release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); |
| device_unregister(&cdev->device); |
| return ERR_PTR(result); |
| } |
| |
| EXPORT_SYMBOL(thermal_cooling_device_register); |
| |
| /** |
| * thermal_cooling_device_unregister - removes the registered thermal cooling device |
| * @cdev: the thermal cooling device to remove. |
| * |
| * thermal_cooling_device_unregister() must be called when the device is no |
| * longer needed. |
| */ |
| void thermal_cooling_device_unregister(struct |
| thermal_cooling_device |
| *cdev) |
| { |
| struct thermal_zone_device *tz; |
| struct thermal_cooling_device *pos = NULL; |
| |
| if (!cdev) |
| return; |
| |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(pos, &thermal_cdev_list, node) |
| if (pos == cdev) |
| break; |
| if (pos != cdev) { |
| /* thermal cooling device not found */ |
| mutex_unlock(&thermal_list_lock); |
| return; |
| } |
| list_del(&cdev->node); |
| list_for_each_entry(tz, &thermal_tz_list, node) { |
| if (!tz->ops->unbind) |
| continue; |
| tz->ops->unbind(tz, cdev); |
| } |
| mutex_unlock(&thermal_list_lock); |
| if (cdev->type[0]) |
| device_remove_file(&cdev->device, &dev_attr_cdev_type); |
| device_remove_file(&cdev->device, &dev_attr_max_state); |
| device_remove_file(&cdev->device, &dev_attr_cur_state); |
| |
| release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); |
| device_unregister(&cdev->device); |
| return; |
| } |
| |
| EXPORT_SYMBOL(thermal_cooling_device_unregister); |
| |
| /** |
| * thermal_zone_device_update - force an update of a thermal zone's state |
| * @ttz: the thermal zone to update |
| */ |
| |
| void thermal_zone_device_update(struct thermal_zone_device *tz) |
| { |
| int count, ret = 0; |
| long temp, trip_temp; |
| enum thermal_trip_type trip_type; |
| struct thermal_cooling_device_instance *instance; |
| struct thermal_cooling_device *cdev; |
| |
| mutex_lock(&tz->lock); |
| |
| if (tz->ops->get_temp(tz, &temp)) { |
| /* get_temp failed - retry it later */ |
| printk(KERN_WARNING PREFIX "failed to read out thermal zone " |
| "%d\n", tz->id); |
| goto leave; |
| } |
| |
| for (count = 0; count < tz->trips; count++) { |
| tz->ops->get_trip_type(tz, count, &trip_type); |
| tz->ops->get_trip_temp(tz, count, &trip_temp); |
| |
| switch (trip_type) { |
| case THERMAL_TRIP_CRITICAL: |
| if (temp >= trip_temp) { |
| if (tz->ops->notify) |
| ret = tz->ops->notify(tz, count, |
| trip_type); |
| if (!ret) { |
| printk(KERN_EMERG |
| "Critical temperature reached (%ld C), shutting down.\n", |
| temp/1000); |
| orderly_poweroff(true); |
| } |
| } |
| break; |
| case THERMAL_TRIP_HOT: |
| if (temp >= trip_temp) |
| if (tz->ops->notify) |
| tz->ops->notify(tz, count, trip_type); |
| break; |
| case THERMAL_TRIP_ACTIVE: |
| list_for_each_entry(instance, &tz->cooling_devices, |
| node) { |
| if (instance->trip != count) |
| continue; |
| |
| cdev = instance->cdev; |
| |
| if (temp >= trip_temp) |
| cdev->ops->set_cur_state(cdev, 1); |
| else |
| cdev->ops->set_cur_state(cdev, 0); |
| } |
| break; |
| case THERMAL_TRIP_PASSIVE: |
| if (temp >= trip_temp || tz->passive) |
| thermal_zone_device_passive(tz, temp, |
| trip_temp, count); |
| break; |
| } |
| } |
| |
| if (tz->forced_passive) |
| thermal_zone_device_passive(tz, temp, tz->forced_passive, |
| THERMAL_TRIPS_NONE); |
| |
| tz->last_temperature = temp; |
| |
| leave: |
| if (tz->passive) |
| thermal_zone_device_set_polling(tz, tz->passive_delay); |
| else if (tz->polling_delay) |
| thermal_zone_device_set_polling(tz, tz->polling_delay); |
| else |
| thermal_zone_device_set_polling(tz, 0); |
| mutex_unlock(&tz->lock); |
| } |
| EXPORT_SYMBOL(thermal_zone_device_update); |
| |
| /** |
| * thermal_zone_device_register - register a new thermal zone device |
| * @type: the thermal zone device type |
| * @trips: the number of trip points the thermal zone support |
| * @devdata: private device data |
| * @ops: standard thermal zone device callbacks |
| * @tc1: thermal coefficient 1 for passive calculations |
| * @tc2: thermal coefficient 2 for passive calculations |
| * @passive_delay: number of milliseconds to wait between polls when |
| * performing passive cooling |
| * @polling_delay: number of milliseconds to wait between polls when checking |
| * whether trip points have been crossed (0 for interrupt |
| * driven systems) |
| * |
| * thermal_zone_device_unregister() must be called when the device is no |
| * longer needed. The passive cooling formula uses tc1 and tc2 as described in |
| * section 11.1.5.1 of the ACPI specification 3.0. |
| */ |
| struct thermal_zone_device *thermal_zone_device_register(char *type, |
| int trips, void *devdata, |
| const struct thermal_zone_device_ops *ops, |
| int tc1, int tc2, int passive_delay, int polling_delay) |
| { |
| struct thermal_zone_device *tz; |
| struct thermal_cooling_device *pos; |
| enum thermal_trip_type trip_type; |
| int result; |
| int count; |
| int passive = 0; |
| |
| if (strlen(type) >= THERMAL_NAME_LENGTH) |
| return ERR_PTR(-EINVAL); |
| |
| if (trips > THERMAL_MAX_TRIPS || trips < 0) |
| return ERR_PTR(-EINVAL); |
| |
| if (!ops || !ops->get_temp) |
| return ERR_PTR(-EINVAL); |
| |
| tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); |
| if (!tz) |
| return ERR_PTR(-ENOMEM); |
| |
| INIT_LIST_HEAD(&tz->cooling_devices); |
| idr_init(&tz->idr); |
| mutex_init(&tz->lock); |
| result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id); |
| if (result) { |
| kfree(tz); |
| return ERR_PTR(result); |
| } |
| |
| strcpy(tz->type, type); |
| tz->ops = ops; |
| tz->device.class = &thermal_class; |
| tz->devdata = devdata; |
| tz->trips = trips; |
| tz->tc1 = tc1; |
| tz->tc2 = tc2; |
| tz->passive_delay = passive_delay; |
| tz->polling_delay = polling_delay; |
| |
| dev_set_name(&tz->device, "thermal_zone%d", tz->id); |
| result = device_register(&tz->device); |
| if (result) { |
| release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); |
| kfree(tz); |
| return ERR_PTR(result); |
| } |
| |
| /* sys I/F */ |
| if (type) { |
| result = device_create_file(&tz->device, &dev_attr_type); |
| if (result) |
| goto unregister; |
| } |
| |
| result = device_create_file(&tz->device, &dev_attr_temp); |
| if (result) |
| goto unregister; |
| |
| if (ops->get_mode) { |
| result = device_create_file(&tz->device, &dev_attr_mode); |
| if (result) |
| goto unregister; |
| } |
| |
| for (count = 0; count < trips; count++) { |
| TRIP_POINT_ATTR_ADD(&tz->device, count, result); |
| if (result) |
| goto unregister; |
| tz->ops->get_trip_type(tz, count, &trip_type); |
| if (trip_type == THERMAL_TRIP_PASSIVE) |
| passive = 1; |
| } |
| |
| if (!passive) |
| result = device_create_file(&tz->device, |
| &dev_attr_passive); |
| |
| if (result) |
| goto unregister; |
| |
| result = thermal_add_hwmon_sysfs(tz); |
| if (result) |
| goto unregister; |
| |
| mutex_lock(&thermal_list_lock); |
| list_add_tail(&tz->node, &thermal_tz_list); |
| if (ops->bind) |
| list_for_each_entry(pos, &thermal_cdev_list, node) { |
| result = ops->bind(tz, pos); |
| if (result) |
| break; |
| } |
| mutex_unlock(&thermal_list_lock); |
| |
| INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check); |
| |
| thermal_zone_device_update(tz); |
| |
| if (!result) |
| return tz; |
| |
| unregister: |
| release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); |
| device_unregister(&tz->device); |
| return ERR_PTR(result); |
| } |
| |
| EXPORT_SYMBOL(thermal_zone_device_register); |
| |
| /** |
| * thermal_device_unregister - removes the registered thermal zone device |
| * @tz: the thermal zone device to remove |
| */ |
| void thermal_zone_device_unregister(struct thermal_zone_device *tz) |
| { |
| struct thermal_cooling_device *cdev; |
| struct thermal_zone_device *pos = NULL; |
| int count; |
| |
| if (!tz) |
| return; |
| |
| mutex_lock(&thermal_list_lock); |
| list_for_each_entry(pos, &thermal_tz_list, node) |
| if (pos == tz) |
| break; |
| if (pos != tz) { |
| /* thermal zone device not found */ |
| mutex_unlock(&thermal_list_lock); |
| return; |
| } |
| list_del(&tz->node); |
| if (tz->ops->unbind) |
| list_for_each_entry(cdev, &thermal_cdev_list, node) |
| tz->ops->unbind(tz, cdev); |
| mutex_unlock(&thermal_list_lock); |
| |
| thermal_zone_device_set_polling(tz, 0); |
| |
| if (tz->type[0]) |
| device_remove_file(&tz->device, &dev_attr_type); |
| device_remove_file(&tz->device, &dev_attr_temp); |
| if (tz->ops->get_mode) |
| device_remove_file(&tz->device, &dev_attr_mode); |
| |
| for (count = 0; count < tz->trips; count++) |
| TRIP_POINT_ATTR_REMOVE(&tz->device, count); |
| |
| thermal_remove_hwmon_sysfs(tz); |
| release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); |
| idr_destroy(&tz->idr); |
| mutex_destroy(&tz->lock); |
| device_unregister(&tz->device); |
| return; |
| } |
| |
| EXPORT_SYMBOL(thermal_zone_device_unregister); |
| |
| #ifdef CONFIG_NET |
| static struct genl_family thermal_event_genl_family = { |
| .id = GENL_ID_GENERATE, |
| .name = THERMAL_GENL_FAMILY_NAME, |
| .version = THERMAL_GENL_VERSION, |
| .maxattr = THERMAL_GENL_ATTR_MAX, |
| }; |
| |
| static struct genl_multicast_group thermal_event_mcgrp = { |
| .name = THERMAL_GENL_MCAST_GROUP_NAME, |
| }; |
| |
| int generate_netlink_event(u32 orig, enum events event) |
| { |
| struct sk_buff *skb; |
| struct nlattr *attr; |
| struct thermal_genl_event *thermal_event; |
| void *msg_header; |
| int size; |
| int result; |
| |
| /* allocate memory */ |
| size = nla_total_size(sizeof(struct thermal_genl_event)) + \ |
| nla_total_size(0); |
| |
| skb = genlmsg_new(size, GFP_ATOMIC); |
| if (!skb) |
| return -ENOMEM; |
| |
| /* add the genetlink message header */ |
| msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++, |
| &thermal_event_genl_family, 0, |
| THERMAL_GENL_CMD_EVENT); |
| if (!msg_header) { |
| nlmsg_free(skb); |
| return -ENOMEM; |
| } |
| |
| /* fill the data */ |
| attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ |
| sizeof(struct thermal_genl_event)); |
| |
| if (!attr) { |
| nlmsg_free(skb); |
| return -EINVAL; |
| } |
| |
| thermal_event = nla_data(attr); |
| if (!thermal_event) { |
| nlmsg_free(skb); |
| return -EINVAL; |
| } |
| |
| memset(thermal_event, 0, sizeof(struct thermal_genl_event)); |
| |
| thermal_event->orig = orig; |
| thermal_event->event = event; |
| |
| /* send multicast genetlink message */ |
| result = genlmsg_end(skb, msg_header); |
| if (result < 0) { |
| nlmsg_free(skb); |
| return result; |
| } |
| |
| result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); |
| if (result) |
| printk(KERN_INFO "failed to send netlink event:%d", result); |
| |
| return result; |
| } |
| EXPORT_SYMBOL(generate_netlink_event); |
| |
| static int genetlink_init(void) |
| { |
| int result; |
| |
| result = genl_register_family(&thermal_event_genl_family); |
| if (result) |
| return result; |
| |
| result = genl_register_mc_group(&thermal_event_genl_family, |
| &thermal_event_mcgrp); |
| if (result) |
| genl_unregister_family(&thermal_event_genl_family); |
| return result; |
| } |
| |
| static void genetlink_exit(void) |
| { |
| genl_unregister_family(&thermal_event_genl_family); |
| } |
| #else /* !CONFIG_NET */ |
| static inline int genetlink_init(void) { return 0; } |
| static inline void genetlink_exit(void) {} |
| #endif /* !CONFIG_NET */ |
| |
| static int __init thermal_init(void) |
| { |
| int result = 0; |
| |
| result = class_register(&thermal_class); |
| if (result) { |
| idr_destroy(&thermal_tz_idr); |
| idr_destroy(&thermal_cdev_idr); |
| mutex_destroy(&thermal_idr_lock); |
| mutex_destroy(&thermal_list_lock); |
| } |
| result = genetlink_init(); |
| return result; |
| } |
| |
| static void __exit thermal_exit(void) |
| { |
| class_unregister(&thermal_class); |
| idr_destroy(&thermal_tz_idr); |
| idr_destroy(&thermal_cdev_idr); |
| mutex_destroy(&thermal_idr_lock); |
| mutex_destroy(&thermal_list_lock); |
| genetlink_exit(); |
| } |
| |
| fs_initcall(thermal_init); |
| module_exit(thermal_exit); |