ARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK board
This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9M10G45-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008ae..0c6d9fe 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,9 +19,12 @@
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
+#include <mach/at91_adc.h>
#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
@@ -1207,6 +1210,104 @@
/* --------------------------------------------------------------------
+ * ADC
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TSC,
+ .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TSC,
+ .end = AT91SAM9G45_ID_TSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device at91_adc_device = {
+ .name = "at91_adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
+ },
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "external-rising",
+ .value = 1,
+ .is_external = true,
+ },
+ [1] = {
+ .name = "external-falling",
+ .value = 2,
+ .is_external = true,
+ },
+ [2] = {
+ .name = "external-any",
+ .value = 3,
+ .is_external = true,
+ },
+ [3] = {
+ .name = "continuous",
+ .value = 6,
+ .is_external = false,
+ },
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g45 = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = 0x08,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+ if (!data)
+ return;
+
+ if (test_bit(0, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD20, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD21, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD22, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD23, 0);
+ if (test_bit(4, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD24, 0);
+ if (test_bit(5, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD25, 0);
+ if (test_bit(6, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD26, 0);
+ if (test_bit(7, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD27, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PD28, 0);
+
+ data->num_channels = 8;
+ data->startup_time = 40;
+ data->registers = &at91_adc_register_g45;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */