V4L/DVB (3295): Add analog support for LifeView FlyDVB Trio.
- Add support for LifeView FlyDVB Trio.
- all analog inputs are supported and working, including FM radio
- TO DO: dvb & remote control
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 4573e52..cb3a59b 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -82,3 +82,4 @@
81 -> Philips Tiger reference design [1131:2018]
82 -> MSI TV@Anywhere plus [1462:6231]
83 -> Terratec Cinergy 250 PCI TV [153b:1160]
+ 84 -> LifeView FlyDVB Trio [5168:0319]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 991829e..77e5be9 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2584,6 +2584,41 @@
.gpio = 0x0200000,
},
},
+ [SAA7134_BOARD_FLYDVB_TRIO] = {
+ /* LifeView LR319 FlyDVB Trio */
+ /* Peter Missel <peter.missel@onlinehome.de> */
+ .name = "LifeView FlyDVB Trio",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .gpiomask = 0x00200000,
+ .inputs = {{
+ .name = name_tv, /* Analog broadcast/cable TV */
+ .vmux = 1,
+ .amux = TV,
+ .gpio = 0x200000, /* GPIO21=High for TV input */
+ .tv = 1,
+ },{
+ .name = name_svideo, /* S-Video signal on S-Video input */
+ .vmux = 8,
+ .amux = LINE2,
+ },{
+ .name = name_comp1, /* Composite signal on S-Video input */
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_comp2, /* Composite input */
+ .vmux = 3,
+ .amux = LINE2,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3043,6 +3078,12 @@
.subdevice = 0x1160,
.driver_data = SAA7134_BOARD_CINERGY250PCI,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA 7131E */
+ .subvendor = 0x5168,
+ .subdevice = 0x0319,
+ .driver_data = SAA7134_BOARD_FLYDVB_TRIO,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 18978a4..e70eae8 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -209,6 +209,7 @@
#define SAA7134_BOARD_PHILIPS_TIGER 81
#define SAA7134_BOARD_MSI_TVATANYWHERE_PLUS 82
#define SAA7134_BOARD_CINERGY250PCI 83
+#define SAA7134_BOARD_FLYDVB_TRIO 84
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8