blob: 09c93ff932b15453d316df1d12b7844697d9ca22 [file] [log] [blame]
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
# Parport configuration.
#
menuconfig PARPORT
tristate "Parallel port support"
depends on HAS_IOMEM
---help---
If you want to use devices connected to your machine's parallel port
(the connector at the computer with 25 holes), e.g. printer, ZIP
drive, PLIP link (Parallel Line Internet Protocol is mainly used to
create a mini network by connecting the parallel ports of two local
machines) etc., then you need to say Y here; please read
<file:Documentation/parport.txt> and
<file:drivers/parport/BUGS-parport>.
For extensive information about drivers for many devices attaching
to the parallel port see <http://www.torque.net/linux-pp.html> on
the WWW.
It is possible to share a single parallel port among several devices
and it is safe to compile all the corresponding drivers into the
kernel. To compile parallel port support as a module, choose M here:
the module will be called parport.
If you have more than one parallel port and want to specify which
port and IRQ to be used by this driver at module load time, take a
look at <file:Documentation/parport.txt>.
If unsure, say Y.
if PARPORT
config PARPORT_PC
tristate "PC-style hardware"
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
parallel ports. PA-RISC owners should only say Y here if they
have a SuperIO parallel port.
To compile this driver as a module, choose M here: the
module will be called parport_pc.
If unsure, say Y.
config PARPORT_SERIAL
tristate "Multi-IO cards (parallel and serial)"
depends on SERIAL_8250_PCI && PARPORT_PC && PCI
help
This adds support for multi-IO PCI cards that have parallel and
serial ports. You should say Y or M here. If you say M, the module
will be called parport_serial.
config PARPORT_PC_FIFO
bool "Use FIFO/DMA if available (EXPERIMENTAL)"
depends on PARPORT_PC && EXPERIMENTAL
help
Many parallel port chipsets provide hardware that can speed up
printing. Say Y here if you want to take advantage of that.
As well as actually having a FIFO, or DMA capability, the kernel
will need to know which IRQ the parallel port has. By default,
parallel port interrupts will not be used, and so neither will the
FIFO. See <file:Documentation/parport.txt> to find out how to
specify which IRQ/DMA to use.
config PARPORT_PC_SUPERIO
bool "SuperIO chipset support (EXPERIMENTAL)"
depends on PARPORT_PC && EXPERIMENTAL
help
Saying Y here enables some probes for Super-IO chipsets in order to
find out things like base addresses, IRQ lines and DMA channels. It
is safe to say N.
config PARPORT_PC_PCMCIA
tristate "Support for PCMCIA management for PC-style ports"
depends on PCMCIA && PARPORT_PC
help
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.
config PARPORT_IP32
tristate "SGI IP32 builtin port (EXPERIMENTAL)"
depends on SGI_IP32 && EXPERIMENTAL
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port on
SGI O2 machines. This code is also available as a module (say M),
called parport_ip32. If in doubt, saying N is the safe plan.
config PARPORT_AMIGA
tristate "Amiga builtin port"
depends on AMIGA
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port hardware on
Amiga machines. This code is also available as a module (say M),
called parport_amiga. If in doubt, saying N is the safe plan.
config PARPORT_MFC3
tristate "Multiface III parallel port"
depends on ZORRO
select PARPORT_NOT_PC
help
Say Y here if you need parallel port support for the MFC3 card.
This code is also available as a module (say M), called
parport_mfc3. If in doubt, saying N is the safe plan.
config PARPORT_ATARI
tristate "Atari hardware"
depends on ATARI
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port hardware on
Atari machines. This code is also available as a module (say M),
called parport_atari. If in doubt, saying N is the safe plan.
config PARPORT_GSC
tristate
default GSC
select PARPORT_NOT_PC
config PARPORT_SUNBPP
tristate "Sparc hardware (EXPERIMENTAL)"
depends on SBUS && EXPERIMENTAL
select PARPORT_NOT_PC
help
This driver provides support for the bidirectional parallel port
found on many Sun machines. Note that many of the newer Ultras
actually have pc style hardware instead.
config PARPORT_AX88796
tristate "AX88796 Parallel Port"
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port hardware on
the AX88796 network controller chip. This code is also available
as a module (say M), called parport_ax88796.
The driver is not dependant on the AX88796 network driver, and
should not interfere with the networking functions of the chip.
config PARPORT_1284
bool "IEEE 1284 transfer modes"
help
If you have a printer that supports status readback or device ID, or
want to use a device that uses enhanced parallel port transfer modes
such as EPP and ECP, say Y here to enable advanced IEEE 1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
config PARPORT_NOT_PC
bool
endif # PARPORT