blob: 923804f49148ab36567e1fb2f18fd4bd538a9cad [file] [log] [blame]
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/interrupt-controller/irq.h>
&spmi_bus {
qcom,pmi8998@2 {
compatible = "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
pmi8998_revid: qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100 0x100>;
qcom,fab-id-valid;
};
qcom,power-on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800 0x100>;
};
qcom,temp-alarm@2400 {
compatible = "qcom,qpnp-temp-alarm";
reg = <0x2400 0x100>;
interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
label = "pmi8998_tz";
};
pmi8998_gpios: pinctrl@c000 {
compatible = "qcom,spmi-gpio";
reg = <0xc000 0xe00>;
interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>,
<0x2 0xc1 0 IRQ_TYPE_NONE>,
<0x2 0xc2 0 IRQ_TYPE_NONE>,
<0x2 0xc4 0 IRQ_TYPE_NONE>,
<0x2 0xc5 0 IRQ_TYPE_NONE>,
<0x2 0xc7 0 IRQ_TYPE_NONE>,
<0x2 0xc8 0 IRQ_TYPE_NONE>,
<0x2 0xc9 0 IRQ_TYPE_NONE>,
<0x2 0xca 0 IRQ_TYPE_NONE>,
<0x2 0xcb 0 IRQ_TYPE_NONE>,
<0x2 0xcd 0 IRQ_TYPE_NONE>;
interrupt-names = "pmi8998_gpio1", "pmi8998_gpio2",
"pmi8998_gpio3", "pmi8998_gpio5",
"pmi8998_gpio6", "pmi8998_gpio8",
"pmi8998_gpio9", "pmi8998_gpio10",
"pmi8998_gpio11", "pmi8998_gpio12",
"pmi8998_gpio14";
gpio-controller;
#gpio-cells = <2>;
qcom,gpios-disallowed = <4 7 13>;
};
qcom,qpnp-qnovo@1500 {
compatible = "qcom,qpnp-qnovo";
reg = <0x1500 0x100>;
interrupts = <0x2 0x15 0x0 IRQ_TYPE_NONE>;
interrupt-names = "ptrain-done";
qcom,pmic-revid = <&pmi8998_revid>;
};
pmi8998_charger: qcom,qpnp-smb2 {
compatible = "qcom,qpnp-smb2";
#address-cells = <1>;
#size-cells = <1>;
qcom,pmic-revid = <&pmi8998_revid>;
io-channels = <&pmi8998_rradc 8>,
<&pmi8998_rradc 10>,
<&pmi8998_rradc 3>,
<&pmi8998_rradc 4>;
io-channel-names = "charger_temp",
"charger_temp_max",
"usbin_i",
"usbin_v";
qcom,boost-threshold-ua = <100000>;
qcom,wipower-max-uw = <5000000>;
qcom,thermal-mitigation
= <3000000 1500000 1000000 500000>;
qcom,chgr@1000 {
reg = <0x1000 0x100>;
interrupts =
<0x2 0x10 0x0 IRQ_TYPE_EDGE_RISING>,
<0x2 0x10 0x1 IRQ_TYPE_EDGE_RISING>,
<0x2 0x10 0x2 IRQ_TYPE_EDGE_RISING>,
<0x2 0x10 0x3 IRQ_TYPE_EDGE_RISING>,
<0x2 0x10 0x4 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "chg-error",
"chg-state-change",
"step-chg-state-change",
"step-chg-soc-update-fail",
"step-chg-soc-update-request";
};
qcom,otg@1100 {
reg = <0x1100 0x100>;
interrupts = <0x2 0x11 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x11 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x11 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x11 0x3 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "otg-fail",
"otg-overcurrent",
"otg-oc-dis-sw-sts",
"testmode-change-detect";
};
qcom,bat-if@1200 {
reg = <0x1200 0x100>;
interrupts =
<0x2 0x12 0x0 IRQ_TYPE_EDGE_RISING>,
<0x2 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x12 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x12 0x5 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "bat-temp",
"bat-ocp",
"bat-ov",
"bat-low",
"bat-therm-or-id-missing",
"bat-terminal-missing";
};
qcom,usb-chgpth@1300 {
reg = <0x1300 0x100>;
interrupts =
<0x2 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x13 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x13 0x5 IRQ_TYPE_EDGE_RISING>,
<0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
<0x2 0x13 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "usbin-collapse",
"usbin-lt-3p6v",
"usbin-uv",
"usbin-ov",
"usbin-plugin",
"usbin-src-change",
"usbin-icl-change",
"type-c-change";
};
qcom,dc-chgpth@1400 {
reg = <0x1400 0x100>;
interrupts =
<0x2 0x14 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x14 0x6 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "dcin-collapse",
"dcin-lt-3p6v",
"dcin-uv",
"dcin-ov",
"dcin-plugin",
"div2-en-dg",
"dcin-icl-change";
};
qcom,chgr-misc@1600 {
reg = <0x1600 0x100>;
interrupts =
<0x2 0x16 0x0 IRQ_TYPE_EDGE_RISING>,
<0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
<0x2 0x16 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x16 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x16 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x16 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x16 0x6 IRQ_TYPE_EDGE_FALLING>,
<0x2 0x16 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "wdog-snarl",
"wdog-bark",
"aicl-fail",
"aicl-done",
"high-duty-cycle",
"input-current-limiting",
"temperature-change",
"switcher-power-ok";
};
};
pmi8998_pdphy: qcom,usb-pdphy@1700 {
compatible = "qcom,qpnp-pdphy";
reg = <0x1700 0x100>;
vdd-pdphy-supply = <&pm8998_l24>;
vbus-supply = <&smb2_vbus>;
vconn-supply = <&smb2_vconn>;
interrupts = <0x2 0x17 0x0 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x1 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x2 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x3 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x4 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x5 IRQ_TYPE_EDGE_RISING>,
<0x2 0x17 0x6 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sig-tx",
"sig-rx",
"msg-tx",
"msg-rx",
"msg-tx-failed",
"msg-tx-discarded",
"msg-rx-discarded";
qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */
<9000 3000>, /* 9V @ 3A */
<12000 2250>; /* 12V @ 2.25A */
};
bcl_sensor: bcl@4200 {
compatible = "qcom,msm-bcl-lmh";
reg = <0x4200 0xff>,
<0x4300 0xff>;
reg-names = "fg_user_adc",
"fg_lmh";
interrupts = <0x2 0x42 0x0 IRQ_TYPE_NONE>,
<0x2 0x42 0x1 IRQ_TYPE_NONE>,
<0x2 0x42 0x2 IRQ_TYPE_NONE>,
<0x2 0x42 0x3 IRQ_TYPE_NONE>,
<0x2 0x42 0x4 IRQ_TYPE_NONE>;
interrupt-names = "bcl-high-ibat",
"bcl-very-high-ibat",
"bcl-low-vbat",
"bcl-very-low-vbat",
"bcl-crit-low-vbat";
#thermal-sensor-cells = <1>;
};
pmi8998_rradc: rradc@4500 {
compatible = "qcom,rradc";
reg = <0x4500 0x100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
qcom,pmic-revid = <&pmi8998_revid>;
};
pmi8998_fg: qpnp,fg {
compatible = "qcom,fg-gen3";
#address-cells = <1>;
#size-cells = <1>;
qcom,pmic-revid = <&pmi8998_revid>;
io-channels = <&pmi8998_rradc 0>;
io-channel-names = "rradc_batt_id";
qcom,rradc-base = <0x4500>;
qcom,fg-esr-timer-awake = <96>;
qcom,fg-esr-timer-asleep = <256>;
qcom,cycle-counter-en;
status = "okay";
qcom,fg-batt-soc@4000 {
status = "okay";
reg = <0x4000 0x100>;
interrupts = <0x2 0x40 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x40 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x40 0x2
IRQ_TYPE_EDGE_RISING>,
<0x2 0x40 0x3
IRQ_TYPE_EDGE_RISING>,
<0x2 0x40 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x40 0x5
IRQ_TYPE_EDGE_RISING>,
<0x2 0x40 0x6 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x40 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "soc-update",
"soc-ready",
"bsoc-delta",
"msoc-delta",
"msoc-low",
"msoc-empty",
"msoc-high",
"msoc-full";
};
qcom,fg-batt-info@4100 {
status = "okay";
reg = <0x4100 0x100>;
interrupts = <0x2 0x41 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x41 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x41 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x41 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x41 0x6 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "vbatt-pred-delta",
"vbatt-low",
"esr-delta",
"batt-missing",
"batt-temp-delta";
};
qcom,fg-memif@4400 {
status = "okay";
reg = <0x4400 0x100>;
interrupts = <0x2 0x44 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x44 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x44 0x2 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "ima-rdy",
"mem-xcp",
"dma-grant";
};
};
};
qcom,pmi8998@3 {
compatible ="qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
pmi8998_pwm_1: pwm@b100 {
compatible = "qcom,qpnp-pwm";
reg = <0xb100 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <1>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <0>;
#pwm-cells = <2>;
status = "disabled";
};
pmi8998_pwm_2: pwm@b200 {
compatible = "qcom,qpnp-pwm";
reg = <0xb200 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <2>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <1>;
#pwm-cells = <2>;
status = "disabled";
};
pmi8998_pwm_3: pwm@b300 {
compatible = "qcom,qpnp-pwm";
reg = <0xb300 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <3>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <2>;
#pwm-cells = <2>;
};
pmi8998_pwm_4: pwm@b400 {
compatible = "qcom,qpnp-pwm";
reg = <0xb400 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <4>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <3>;
#pwm-cells = <2>;
};
pmi8998_pwm_5: pwm@b500 {
compatible = "qcom,qpnp-pwm";
reg = <0xb500 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <5>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <4>;
#pwm-cells = <2>;
};
pmi8998_pwm_6: pwm@b600 {
compatible = "qcom,qpnp-pwm";
reg = <0xb600 0x100>,
<0xb042 0x7e>;
reg-names = "qpnp-lpg-channel-base",
"qpnp-lpg-lut-base";
qcom,lpg-lut-size = <0x7e>;
qcom,channel-id = <6>;
qcom,supported-sizes = <6>, <9>;
qcom,ramp-index = <5>;
#pwm-cells = <2>;
status = "disabled";
};
qcom,leds@d000 {
compatible = "qcom,leds-qpnp";
reg = <0xd000 0x100>;
label = "rgb";
status = "okay";
red_led: qcom,rgb_0 {
label = "rgb";
qcom,id = <3>;
qcom,mode = "pwm";
pwms = <&pmi8998_pwm_5 0 0>;
qcom,pwm-us = <1000>;
qcom,max-current = <12>;
qcom,default-state = "off";
linux,name = "red";
linux,default-trigger = "battery-charging";
};
green_led: qcom,rgb_1 {
label = "rgb";
qcom,id = <4>;
qcom,mode = "pwm";
pwms = <&pmi8998_pwm_4 0 0>;
qcom,pwm-us = <1000>;
qcom,max-current = <12>;
qcom,default-state = "off";
linux,name = "green";
linux,default-trigger = "battery-full";
};
blue_led: qcom,rgb_2 {
label = "rgb";
qcom,id = <5>;
qcom,mode = "pwm";
pwms = <&pmi8998_pwm_3 0 0>;
qcom,pwm-us = <1000>;
qcom,max-current = <12>;
qcom,default-state = "off";
linux,name = "blue";
linux,default-trigger = "boot-indication";
};
};
labibb: qpnp-labibb-regulator {
compatible = "qcom,qpnp-labibb-regulator";
#address-cells = <1>;
#size-cells = <1>;
qcom,pmic-revid = <&pmi8998_revid>;
status = "disabled";
ibb_regulator: qcom,ibb@dc00 {
reg = <0xdc00 0x100>;
reg-names = "ibb_reg";
regulator-name = "ibb_reg";
regulator-min-microvolt = <4600000>;
regulator-max-microvolt = <6000000>;
qcom,qpnp-ibb-min-voltage = <1400000>;
qcom,qpnp-ibb-step-size = <100000>;
qcom,qpnp-ibb-slew-rate = <2000000>;
qcom,qpnp-ibb-use-default-voltage;
qcom,qpnp-ibb-init-voltage = <5500000>;
qcom,qpnp-ibb-init-amoled-voltage = <4000000>;
qcom,qpnp-ibb-init-lcd-voltage = <5500000>;
qcom,qpnp-ibb-soft-start = <1000>;
qcom,qpnp-ibb-lab-pwrup-delay = <8000>;
qcom,qpnp-ibb-lab-pwrdn-delay = <8000>;
qcom,qpnp-ibb-en-discharge;
qcom,qpnp-ibb-full-pull-down;
qcom,qpnp-ibb-pull-down-enable;
qcom,qpnp-ibb-switching-clock-frequency =
<1480>;
qcom,qpnp-ibb-limit-maximum-current = <1550>;
qcom,qpnp-ibb-debounce-cycle = <16>;
qcom,qpnp-ibb-limit-max-current-enable;
qcom,qpnp-ibb-ps-enable;
};
lab_regulator: qcom,lab@de00 {
reg = <0xde00 0x100>;
reg-names = "lab";
regulator-name = "lab_reg";
regulator-min-microvolt = <4600000>;
regulator-max-microvolt = <6000000>;
interrupts = <0x3 0xde 0x0
IRQ_TYPE_EDGE_RISING>;
interrupt-names = "lab-vreg-ok";
qcom,qpnp-lab-min-voltage = <4600000>;
qcom,qpnp-lab-step-size = <100000>;
qcom,qpnp-lab-slew-rate = <5000>;
qcom,qpnp-lab-use-default-voltage;
qcom,qpnp-lab-init-voltage = <5500000>;
qcom,qpnp-lab-init-amoled-voltage = <4600000>;
qcom,qpnp-lab-init-lcd-voltage = <5500000>;
qcom,qpnp-lab-soft-start = <800>;
qcom,qpnp-lab-full-pull-down;
qcom,qpnp-lab-pull-down-enable;
qcom,qpnp-lab-switching-clock-frequency =
<1600>;
qcom,qpnp-lab-limit-maximum-current = <1600>;
qcom,qpnp-lab-limit-max-current-enable;
qcom,qpnp-lab-ps-threshold = <20>;
qcom,qpnp-lab-ps-enable;
qcom,qpnp-lab-nfet-size = <100>;
qcom,qpnp-lab-pfet-size = <100>;
qcom,qpnp-lab-max-precharge-time = <500>;
};
};
pmi8998_wled: qcom,leds@d800 {
compatible = "qcom,qpnp-wled";
reg = <0xd800 0x100>,
<0xd900 0x100>;
reg-names = "qpnp-wled-ctrl-base",
"qpnp-wled-sink-base";
interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ovp-irq", "sc-irq";
linux,name = "wled";
linux,default-trigger = "bkl-trigger";
qcom,fdbk-output = "auto";
qcom,vref-uv = <127500>;
qcom,switch-freq-khz = <800>;
qcom,ovp-mv = <29600>;
qcom,ilim-ma = <970>;
qcom,boost-duty-ns = <26>;
qcom,mod-freq-khz = <9600>;
qcom,dim-mode = "hybrid";
qcom,hyb-thres = <625>;
qcom,sync-dly-us = <800>;
qcom,fs-curr-ua = <25000>;
qcom,cons-sync-write-delay-us = <1000>;
qcom,led-strings-list = [00 01 02 03];
qcom,en-ext-pfet-sc-pro;
qcom,pmic-revid = <&pmi8998_revid>;
qcom,loop-auto-gm-en;
status = "disabled";
};
flash_led: qcom,leds@d300 {
compatible = "qcom,qpnp-flash-led-v2";
status = "okay";
reg = <0xd300 0x100>;
label = "flash";
interrupts = <0x3 0xd3 0x0 IRQ_TYPE_EDGE_RISING>,
<0x3 0xd3 0x3 IRQ_TYPE_EDGE_RISING>,
<0x3 0xd3 0x4 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "led-fault-irq",
"all-ramp-down-done-irq",
"all-ramp-up-done-irq";
qcom,hdrm-auto-mode;
qcom,short-circuit-det;
qcom,open-circuit-det;
qcom,vph-droop-det;
qcom,thermal-derate-en;
qcom,thermal-derate-current = <200 500 1000>;
qcom,isc-delay = <192>;
qcom,pmic-revid = <&pmi8998_revid>;
pmi8998_flash0: qcom,flash_0 {
label = "flash";
qcom,led-name = "led:flash_0";
qcom,max-current = <1500>;
qcom,default-led-trigger = "flash0_trigger";
qcom,id = <0>;
qcom,current-ma = <1000>;
qcom,duration-ms = <1280>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_flash1: qcom,flash_1 {
label = "flash";
qcom,led-name = "led:flash_1";
qcom,max-current = <1500>;
qcom,default-led-trigger = "flash1_trigger";
qcom,id = <1>;
qcom,current-ma = <1000>;
qcom,duration-ms = <1280>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_flash2: qcom,flash_2 {
label = "flash";
qcom,led-name = "led:flash_2";
qcom,max-current = <750>;
qcom,default-led-trigger = "flash2_trigger";
qcom,id = <2>;
qcom,current-ma = <500>;
qcom,duration-ms = <1280>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_torch0: qcom,torch_0 {
label = "torch";
qcom,led-name = "led:torch_0";
qcom,max-current = <500>;
qcom,default-led-trigger = "torch0_trigger";
qcom,id = <0>;
qcom,current-ma = <300>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_torch1: qcom,torch_1 {
label = "torch";
qcom,led-name = "led:torch_1";
qcom,max-current = <500>;
qcom,default-led-trigger = "torch1_trigger";
qcom,id = <1>;
qcom,current-ma = <300>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_torch2: qcom,torch_2 {
label = "torch";
qcom,led-name = "led:torch_2";
qcom,max-current = <500>;
qcom,default-led-trigger = "torch2_trigger";
qcom,id = <2>;
qcom,current-ma = <300>;
qcom,ires-ua = <12500>;
qcom,hdrm-voltage-mv = <325>;
qcom,hdrm-vol-hi-lo-win-mv = <100>;
};
pmi8998_switch0: qcom,led_switch_0 {
label = "switch";
qcom,led-name = "led:switch_0";
qcom,led-mask = <3>;
qcom,default-led-trigger = "switch0_trigger";
};
pmi8998_switch1: qcom,led_switch_1 {
label = "switch";
qcom,led-name = "led:switch_1";
qcom,led-mask = <4>;
qcom,default-led-trigger = "switch1_trigger";
};
};
};
};
&thermal_zones {
ibat-high {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&bcl_sensor 0>;
trips {
ibat_high: low-ibat {
temperature = <4200>;
hysteresis = <200>;
type = "passive";
};
};
};
ibat-vhigh {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&bcl_sensor 1>;
trips {
ibat_vhigh: ibat_vhigh {
temperature = <4300>;
hysteresis = <100>;
type = "passive";
};
};
};
vbat {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "low_limits_cap";
thermal-sensors = <&bcl_sensor 2>;
tracks-low;
trips {
low_vbat: low-vbat {
temperature = <3300>;
hysteresis = <100>;
type = "passive";
};
};
cooling-maps {
vbat_cpu4 {
trip = <&low_vbat>;
cooling-device = <&CPU4 22 22>;
};
vbat_cpu5 {
trip = <&low_vbat>;
cooling-device = <&CPU5 22 22>;
};
vbat_map6 {
trip = <&low_vbat>;
cooling-device = <&CPU6 22 22>;
};
vbat_map7 {
trip = <&low_vbat>;
cooling-device = <&CPU7 22 22>;
};
};
};
vbat_low {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "low_limits_cap";
thermal-sensors = <&bcl_sensor 3>;
tracks-low;
trips {
low-vbat {
temperature = <3100>;
hysteresis = <0>;
type = "passive";
};
};
};
vbat_too_low {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "low_limits_cap";
thermal-sensors = <&bcl_sensor 4>;
tracks-low;
trips {
low-vbat {
temperature = <2900>;
hysteresis = <0>;
type = "passive";
};
};
};
soc {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "low_limits_cap";
thermal-sensors = <&bcl_sensor 5>;
tracks-low;
trips {
low_soc: low-soc {
temperature = <10>;
hysteresis = <0>;
type = "passive";
};
};
cooling-maps {
soc_cpu4 {
trip = <&low_soc>;
cooling-device = <&CPU4 22 22>;
};
soc_cpu5 {
trip = <&low_soc>;
cooling-device = <&CPU5 22 22>;
};
soc_map6 {
trip = <&low_soc>;
cooling-device = <&CPU6 22 22>;
};
soc_map7 {
trip = <&low_soc>;
cooling-device = <&CPU7 22 22>;
};
};
};
};