brcmfmac: rework single packet transfers
The function brcmf_sdio_sglist_rw() does a different code path
when packet queue length is 1. Move this to a separate function
reducing overhead in the calling context.
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 344b2d2..da02816 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -314,6 +314,34 @@
*ret = retval;
}
+static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
+ bool write, u32 addr, struct sk_buff *pkt)
+{
+ unsigned int req_sz;
+
+ brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+ if (brcmf_pm_resume_error(sdiodev))
+ return -EIO;
+
+ /* Single skb use the standard mmc interface */
+ req_sz = pkt->len + 3;
+ req_sz &= (uint)~3;
+
+ if (write)
+ return sdio_memcpy_toio(sdiodev->func[fn], addr,
+ ((u8 *)(pkt->data)),
+ req_sz);
+ else if (fn == 1)
+ return sdio_memcpy_fromio(sdiodev->func[fn],
+ ((u8 *)(pkt->data)),
+ addr, req_sz);
+ else
+ /* function 2 read is FIFO operation */
+ return sdio_readsb(sdiodev->func[fn],
+ ((u8 *)(pkt->data)), addr,
+ req_sz);
+}
+
/**
* brcmf_sdio_sglist_rw - SDIO interface function for block data access
* @sdiodev: brcmfmac sdio device
@@ -350,27 +378,6 @@
if (brcmf_pm_resume_error(sdiodev))
return -EIO;
- /* Single skb use the standard mmc interface */
- if (pktlist->qlen == 1) {
- pkt_next = pktlist->next;
- req_sz = pkt_next->len + 3;
- req_sz &= (uint)~3;
-
- if (write)
- return sdio_memcpy_toio(sdiodev->func[fn], addr,
- ((u8 *)(pkt_next->data)),
- req_sz);
- else if (fn == 1)
- return sdio_memcpy_fromio(sdiodev->func[fn],
- ((u8 *)(pkt_next->data)),
- addr, req_sz);
- else
- /* function 2 read is FIFO operation */
- return sdio_readsb(sdiodev->func[fn],
- ((u8 *)(pkt_next->data)), addr,
- req_sz);
- }
-
target_list = pktlist;
/* for host with broken sg support, prepare a page aligned list */
__skb_queue_head_init(&local_list);
@@ -543,7 +550,6 @@
{
uint width;
int err = 0;
- struct sk_buff_head pkt_list;
brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
fn, addr, pkt->len);
@@ -553,10 +559,7 @@
if (err)
goto done;
- skb_queue_head_init(&pkt_list);
- skb_queue_tail(&pkt_list, pkt);
- err = brcmf_sdio_sglist_rw(sdiodev, fn, false, addr, &pkt_list);
- skb_dequeue_tail(&pkt_list);
+ err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
done:
return err;
@@ -589,7 +592,7 @@
uint flags, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
- struct sk_buff_head pktq;
+ uint width;
int err;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -600,10 +603,11 @@
}
memcpy(mypkt->data, buf, nbytes);
- __skb_queue_head_init(&pktq);
- __skb_queue_tail(&pktq, mypkt);
- err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, &pktq);
- __skb_dequeue_tail(&pktq);
+
+ width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+ brcmf_sdio_addrprep(sdiodev, width, &addr);
+
+ err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, mypkt);
brcmu_pkt_buf_free_skb(mypkt);
return err;
@@ -615,7 +619,6 @@
uint flags, struct sk_buff_head *pktq)
{
uint width;
- int err = 0;
brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
fn, addr, pktq->qlen);
@@ -623,9 +626,9 @@
width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
brcmf_sdio_addrprep(sdiodev, width, &addr);
- err = brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq);
-
- return err;
+ if (pktq->qlen == 1)
+ return brcmf_sdio_buffrw(sdiodev, fn, true, addr, pktq->next);
+ return brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq);
}
int
@@ -636,7 +639,6 @@
struct sk_buff *pkt;
u32 sdaddr;
uint dsize;
- struct sk_buff_head pkt_list;
dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
pkt = dev_alloc_skb(dsize);
@@ -645,7 +647,6 @@
return -EIO;
}
pkt->priority = 0;
- skb_queue_head_init(&pkt_list);
/* Determine initial transfer parameters */
sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
@@ -673,10 +674,8 @@
skb_put(pkt, dsize);
if (write)
memcpy(pkt->data, data, dsize);
- skb_queue_tail(&pkt_list, pkt);
- bcmerror = brcmf_sdio_sglist_rw(sdiodev, SDIO_FUNC_1, write,
- sdaddr, &pkt_list);
- skb_dequeue_tail(&pkt_list);
+ bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
+ sdaddr, pkt);
if (bcmerror) {
brcmf_err("membytes transfer failed\n");
break;