| /******************************************************************* |
| * This file is part of the Emulex Linux Device Driver for * |
| * Fibre Channel Host Bus Adapters. * |
| * Copyright (C) 2004-2008 Emulex. All rights reserved. * |
| * EMULEX and SLI are trademarks of Emulex. * |
| * www.emulex.com * |
| * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| * * |
| * This program is free software; you can redistribute it and/or * |
| * modify it under the terms of version 2 of the GNU General * |
| * Public License as published by the Free Software Foundation. * |
| * This program is distributed in the hope that it will be useful. * |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| * more details, a copy of which can be found in the file COPYING * |
| * included with this package. * |
| *******************************************************************/ |
| |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/kthread.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_transport_fc.h> |
| #include "lpfc_hw4.h" |
| #include "lpfc_hw.h" |
| #include "lpfc_sli.h" |
| #include "lpfc_sli4.h" |
| #include "lpfc_nl.h" |
| #include "lpfc_disc.h" |
| #include "lpfc_scsi.h" |
| #include "lpfc.h" |
| #include "lpfc_logmsg.h" |
| #include "lpfc_crtn.h" |
| #include "lpfc_version.h" |
| #include "lpfc_vport.h" |
| |
| inline void lpfc_vport_set_state(struct lpfc_vport *vport, |
| enum fc_vport_state new_state) |
| { |
| struct fc_vport *fc_vport = vport->fc_vport; |
| |
| if (fc_vport) { |
| /* |
| * When the transport defines fc_vport_set state we will replace |
| * this code with the following line |
| */ |
| /* fc_vport_set_state(fc_vport, new_state); */ |
| if (new_state != FC_VPORT_INITIALIZING) |
| fc_vport->vport_last_state = fc_vport->vport_state; |
| fc_vport->vport_state = new_state; |
| } |
| |
| /* for all the error states we will set the invternal state to FAILED */ |
| switch (new_state) { |
| case FC_VPORT_NO_FABRIC_SUPP: |
| case FC_VPORT_NO_FABRIC_RSCS: |
| case FC_VPORT_FABRIC_LOGOUT: |
| case FC_VPORT_FABRIC_REJ_WWN: |
| case FC_VPORT_FAILED: |
| vport->port_state = LPFC_VPORT_FAILED; |
| break; |
| case FC_VPORT_LINKDOWN: |
| vport->port_state = LPFC_VPORT_UNKNOWN; |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| } |
| |
| static int |
| lpfc_alloc_vpi(struct lpfc_hba *phba) |
| { |
| int vpi; |
| |
| spin_lock_irq(&phba->hbalock); |
| /* Start at bit 1 because vpi zero is reserved for the physical port */ |
| vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1); |
| if (vpi > phba->max_vpi) |
| vpi = 0; |
| else |
| set_bit(vpi, phba->vpi_bmask); |
| if (phba->sli_rev == LPFC_SLI_REV4) |
| phba->sli4_hba.max_cfg_param.vpi_used++; |
| spin_unlock_irq(&phba->hbalock); |
| return vpi; |
| } |
| |
| static void |
| lpfc_free_vpi(struct lpfc_hba *phba, int vpi) |
| { |
| if (vpi == 0) |
| return; |
| spin_lock_irq(&phba->hbalock); |
| clear_bit(vpi, phba->vpi_bmask); |
| if (phba->sli_rev == LPFC_SLI_REV4) |
| phba->sli4_hba.max_cfg_param.vpi_used--; |
| spin_unlock_irq(&phba->hbalock); |
| } |
| |
| static int |
| lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) |
| { |
| LPFC_MBOXQ_t *pmb; |
| MAILBOX_t *mb; |
| struct lpfc_dmabuf *mp; |
| int rc; |
| |
| pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| if (!pmb) { |
| return -ENOMEM; |
| } |
| mb = &pmb->u.mb; |
| |
| lpfc_read_sparam(phba, pmb, vport->vpi); |
| /* |
| * Grab buffer pointer and clear context1 so we can use |
| * lpfc_sli_issue_box_wait |
| */ |
| mp = (struct lpfc_dmabuf *) pmb->context1; |
| pmb->context1 = NULL; |
| |
| pmb->vport = vport; |
| rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); |
| if (rc != MBX_SUCCESS) { |
| if (signal_pending(current)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, |
| "1830 Signal aborted mbxCmd x%x\n", |
| mb->mbxCommand); |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| if (rc != MBX_TIMEOUT) |
| mempool_free(pmb, phba->mbox_mem_pool); |
| return -EINTR; |
| } else { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, |
| "1818 VPort failed init, mbxCmd x%x " |
| "READ_SPARM mbxStatus x%x, rc = x%x\n", |
| mb->mbxCommand, mb->mbxStatus, rc); |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| if (rc != MBX_TIMEOUT) |
| mempool_free(pmb, phba->mbox_mem_pool); |
| return -EIO; |
| } |
| } |
| |
| memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); |
| memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, |
| sizeof (struct lpfc_name)); |
| memcpy(&vport->fc_portname, &vport->fc_sparam.portName, |
| sizeof (struct lpfc_name)); |
| |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| mempool_free(pmb, phba->mbox_mem_pool); |
| |
| return 0; |
| } |
| |
| static int |
| lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn, |
| const char *name_type) |
| { |
| /* ensure that IEEE format 1 addresses |
| * contain zeros in bits 59-48 |
| */ |
| if (!((wwn->u.wwn[0] >> 4) == 1 && |
| ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0))) |
| return 1; |
| |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1822 Invalid %s: %02x:%02x:%02x:%02x:" |
| "%02x:%02x:%02x:%02x\n", |
| name_type, |
| wwn->u.wwn[0], wwn->u.wwn[1], |
| wwn->u.wwn[2], wwn->u.wwn[3], |
| wwn->u.wwn[4], wwn->u.wwn[5], |
| wwn->u.wwn[6], wwn->u.wwn[7]); |
| return 0; |
| } |
| |
| static int |
| lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) |
| { |
| struct lpfc_vport *vport; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&phba->hbalock, flags); |
| list_for_each_entry(vport, &phba->port_list, listentry) { |
| if (vport == new_vport) |
| continue; |
| /* If they match, return not unique */ |
| if (memcmp(&vport->fc_sparam.portName, |
| &new_vport->fc_sparam.portName, |
| sizeof(struct lpfc_name)) == 0) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| return 0; |
| } |
| } |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| return 1; |
| } |
| |
| /** |
| * lpfc_discovery_wait - Wait for driver discovery to quiesce |
| * @vport: The virtual port for which this call is being executed. |
| * |
| * This driver calls this routine specifically from lpfc_vport_delete |
| * to enforce a synchronous execution of vport |
| * delete relative to discovery activities. The |
| * lpfc_vport_delete routine should not return until it |
| * can reasonably guarantee that discovery has quiesced. |
| * Post FDISC LOGO, the driver must wait until its SAN teardown is |
| * complete and all resources recovered before allowing |
| * cleanup. |
| * |
| * This routine does not require any locks held. |
| **/ |
| static void lpfc_discovery_wait(struct lpfc_vport *vport) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| uint32_t wait_flags = 0; |
| unsigned long wait_time_max; |
| unsigned long start_time; |
| |
| wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | |
| FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; |
| |
| /* |
| * The time constraint on this loop is a balance between the |
| * fabric RA_TOV value and dev_loss tmo. The driver's |
| * devloss_tmo is 10 giving this loop a 3x multiplier minimally. |
| */ |
| wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); |
| wait_time_max += jiffies; |
| start_time = jiffies; |
| while (time_before(jiffies, wait_time_max)) { |
| if ((vport->num_disc_nodes > 0) || |
| (vport->fc_flag & wait_flags) || |
| ((vport->port_state > LPFC_VPORT_FAILED) && |
| (vport->port_state < LPFC_VPORT_READY))) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, |
| "1833 Vport discovery quiesce Wait:" |
| " state x%x fc_flags x%x" |
| " num_nodes x%x, waiting 1000 msecs" |
| " total wait msecs x%x\n", |
| vport->port_state, vport->fc_flag, |
| vport->num_disc_nodes, |
| jiffies_to_msecs(jiffies - start_time)); |
| msleep(1000); |
| } else { |
| /* Base case. Wait variants satisfied. Break out */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, |
| "1834 Vport discovery quiesced:" |
| " state x%x fc_flags x%x" |
| " wait msecs x%x\n", |
| vport->port_state, vport->fc_flag, |
| jiffies_to_msecs(jiffies |
| - start_time)); |
| break; |
| } |
| } |
| |
| if (time_after(jiffies, wait_time_max)) |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1835 Vport discovery quiesce failed:" |
| " state x%x fc_flags x%x wait msecs x%x\n", |
| vport->port_state, vport->fc_flag, |
| jiffies_to_msecs(jiffies - start_time)); |
| } |
| |
| int |
| lpfc_vport_create(struct fc_vport *fc_vport, bool disable) |
| { |
| struct lpfc_nodelist *ndlp; |
| struct Scsi_Host *shost = fc_vport->shost; |
| struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata; |
| struct lpfc_hba *phba = pport->phba; |
| struct lpfc_vport *vport = NULL; |
| int instance; |
| int vpi; |
| int rc = VPORT_ERROR; |
| int status; |
| |
| if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1808 Create VPORT failed: " |
| "NPIV is not enabled: SLImode:%d\n", |
| phba->sli_rev); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| vpi = lpfc_alloc_vpi(phba); |
| if (vpi == 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1809 Create VPORT failed: " |
| "Max VPORTs (%d) exceeded\n", |
| phba->max_vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| /* Assign an unused board number */ |
| if ((instance = lpfc_get_instance()) < 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1810 Create VPORT failed: Cannot get " |
| "instance number\n"); |
| lpfc_free_vpi(phba, vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| vport = lpfc_create_port(phba, instance, &fc_vport->dev); |
| if (!vport) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1811 Create VPORT failed: vpi x%x\n", vpi); |
| lpfc_free_vpi(phba, vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| vport->vpi = vpi; |
| lpfc_debugfs_initialize(vport); |
| |
| if ((status = lpfc_vport_sparm(phba, vport))) { |
| if (status == -EINTR) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1831 Create VPORT Interrupted.\n"); |
| rc = VPORT_ERROR; |
| } else { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1813 Create VPORT failed. " |
| "Cannot get sparam\n"); |
| rc = VPORT_NORESOURCES; |
| } |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| goto error_out; |
| } |
| |
| u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn); |
| u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn); |
| |
| memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8); |
| memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8); |
| |
| if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") || |
| !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1821 Create VPORT failed. " |
| "Invalid WWN format\n"); |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| if (!lpfc_unique_wwpn(phba, vport)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1823 Create VPORT failed. " |
| "Duplicate WWN on HBA\n"); |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| /* Create binary sysfs attribute for vport */ |
| lpfc_alloc_sysfs_attr(vport); |
| |
| *(struct lpfc_vport **)fc_vport->dd_data = vport; |
| vport->fc_vport = fc_vport; |
| |
| /* |
| * In SLI4, the vpi must be activated before it can be used |
| * by the port. |
| */ |
| if ((phba->sli_rev == LPFC_SLI_REV4) && |
| (pport->vfi_state & LPFC_VFI_REGISTERED)) { |
| rc = lpfc_sli4_init_vpi(phba, vpi); |
| if (rc) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1838 Failed to INIT_VPI on vpi %d " |
| "status %d\n", vpi, rc); |
| rc = VPORT_NORESOURCES; |
| lpfc_free_vpi(phba, vpi); |
| goto error_out; |
| } |
| } else if (phba->sli_rev == LPFC_SLI_REV4) { |
| /* |
| * Driver cannot INIT_VPI now. Set the flags to |
| * init_vpi when reg_vfi complete. |
| */ |
| vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); |
| rc = VPORT_OK; |
| goto out; |
| } |
| |
| if ((phba->link_state < LPFC_LINK_UP) || |
| (pport->port_state < LPFC_FABRIC_CFG_LINK) || |
| (phba->fc_topology == TOPOLOGY_LOOP)) { |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); |
| rc = VPORT_OK; |
| goto out; |
| } |
| |
| if (disable) { |
| lpfc_vport_set_state(vport, FC_VPORT_DISABLED); |
| rc = VPORT_OK; |
| goto out; |
| } |
| |
| /* Use the Physical nodes Fabric NDLP to determine if the link is |
| * up and ready to FDISC. |
| */ |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { |
| lpfc_set_disctmo(vport); |
| lpfc_initial_fdisc(vport); |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, |
| "0262 No NPIV Fabric support\n"); |
| } |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); |
| } |
| rc = VPORT_OK; |
| |
| out: |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1825 Vport Created.\n"); |
| lpfc_host_attrib_init(lpfc_shost_from_vport(vport)); |
| error_out: |
| return rc; |
| } |
| |
| static int |
| disable_vport(struct fc_vport *fc_vport) |
| { |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; |
| long timeout; |
| |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) |
| && phba->link_state >= LPFC_LINK_UP) { |
| vport->unreg_vpi_cmpl = VPORT_INVAL; |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) |
| timeout = schedule_timeout(timeout); |
| } |
| |
| lpfc_sli_host_down(vport); |
| |
| /* Mark all nodes for discovery so we can remove them by |
| * calling lpfc_cleanup_rpis(vport, 1) |
| */ |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
| if (!NLP_CHK_NODE_ACT(ndlp)) |
| continue; |
| if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) |
| continue; |
| lpfc_disc_state_machine(vport, ndlp, NULL, |
| NLP_EVT_DEVICE_RECOVERY); |
| } |
| lpfc_cleanup_rpis(vport, 1); |
| |
| lpfc_stop_vport_timers(vport); |
| lpfc_unreg_all_rpis(vport); |
| lpfc_unreg_default_rpis(vport); |
| /* |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the |
| * scsi_host_put() to release the vport. |
| */ |
| lpfc_mbx_unreg_vpi(vport); |
| |
| lpfc_vport_set_state(vport, FC_VPORT_DISABLED); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1826 Vport Disabled.\n"); |
| return VPORT_OK; |
| } |
| |
| static int |
| enable_vport(struct fc_vport *fc_vport) |
| { |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| struct lpfc_nodelist *ndlp = NULL; |
| |
| if ((phba->link_state < LPFC_LINK_UP) || |
| (phba->fc_topology == TOPOLOGY_LOOP)) { |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); |
| return VPORT_OK; |
| } |
| |
| vport->load_flag |= FC_LOADING; |
| vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; |
| |
| /* Use the Physical nodes Fabric NDLP to determine if the link is |
| * up and ready to FDISC. |
| */ |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) |
| && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { |
| lpfc_set_disctmo(vport); |
| lpfc_initial_fdisc(vport); |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, |
| "0264 No NPIV Fabric support\n"); |
| } |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); |
| } |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1827 Vport Enabled.\n"); |
| return VPORT_OK; |
| } |
| |
| int |
| lpfc_vport_disable(struct fc_vport *fc_vport, bool disable) |
| { |
| if (disable) |
| return disable_vport(fc_vport); |
| else |
| return enable_vport(fc_vport); |
| } |
| |
| |
| int |
| lpfc_vport_delete(struct fc_vport *fc_vport) |
| { |
| struct lpfc_nodelist *ndlp = NULL; |
| struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost; |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| long timeout; |
| |
| if (vport->port_type == LPFC_PHYSICAL_PORT) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1812 vport_delete failed: Cannot delete " |
| "physical host\n"); |
| return VPORT_ERROR; |
| } |
| |
| /* If the vport is a static vport fail the deletion. */ |
| if ((vport->vport_flag & STATIC_VPORT) && |
| !(phba->pport->load_flag & FC_UNLOADING)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1837 vport_delete failed: Cannot delete " |
| "static vport.\n"); |
| return VPORT_ERROR; |
| } |
| |
| /* |
| * If we are not unloading the driver then prevent the vport_delete |
| * from happening until after this vport's discovery is finished. |
| */ |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { |
| int check_count = 0; |
| while (check_count < ((phba->fc_ratov * 3) + 3) && |
| vport->port_state > LPFC_VPORT_FAILED && |
| vport->port_state < LPFC_VPORT_READY) { |
| check_count++; |
| msleep(1000); |
| } |
| if (vport->port_state > LPFC_VPORT_FAILED && |
| vport->port_state < LPFC_VPORT_READY) |
| return -EAGAIN; |
| } |
| /* |
| * This is a bit of a mess. We want to ensure the shost doesn't get |
| * torn down until we're done with the embedded lpfc_vport structure. |
| * |
| * Beyond holding a reference for this function, we also need a |
| * reference for outstanding I/O requests we schedule during delete |
| * processing. But once we scsi_remove_host() we can no longer obtain |
| * a reference through scsi_host_get(). |
| * |
| * So we take two references here. We release one reference at the |
| * bottom of the function -- after delinking the vport. And we |
| * release the other at the completion of the unreg_vpi that get's |
| * initiated after we've disposed of all other resources associated |
| * with the port. |
| */ |
| if (!scsi_host_get(shost)) |
| return VPORT_INVAL; |
| if (!scsi_host_get(shost)) { |
| scsi_host_put(shost); |
| return VPORT_INVAL; |
| } |
| spin_lock_irq(&phba->hbalock); |
| vport->load_flag |= FC_UNLOADING; |
| spin_unlock_irq(&phba->hbalock); |
| |
| lpfc_free_sysfs_attr(vport); |
| |
| lpfc_debugfs_terminate(vport); |
| |
| /* Remove FC host and then SCSI host with the vport */ |
| fc_remove_host(lpfc_shost_from_vport(vport)); |
| scsi_remove_host(lpfc_shost_from_vport(vport)); |
| |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| |
| /* In case of driver unload, we shall not perform fabric logo as the |
| * worker thread already stopped at this stage and, in this case, we |
| * can safely skip the fabric logo. |
| */ |
| if (phba->pport->load_flag & FC_UNLOADING) { |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && |
| phba->link_state >= LPFC_LINK_UP) { |
| /* First look for the Fabric ndlp */ |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); |
| if (!ndlp) |
| goto skip_logo; |
| else if (!NLP_CHK_NODE_ACT(ndlp)) { |
| ndlp = lpfc_enable_node(vport, ndlp, |
| NLP_STE_UNUSED_NODE); |
| if (!ndlp) |
| goto skip_logo; |
| } |
| /* Remove ndlp from vport npld list */ |
| lpfc_dequeue_node(vport, ndlp); |
| |
| /* Indicate free memory when release */ |
| spin_lock_irq(&phba->ndlp_lock); |
| NLP_SET_FREE_REQ(ndlp); |
| spin_unlock_irq(&phba->ndlp_lock); |
| /* Kick off release ndlp when it can be safely done */ |
| lpfc_nlp_put(ndlp); |
| } |
| goto skip_logo; |
| } |
| |
| /* Otherwise, we will perform fabric logo as needed */ |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && |
| phba->link_state >= LPFC_LINK_UP && |
| phba->fc_topology != TOPOLOGY_LOOP) { |
| if (vport->cfg_enable_da_id) { |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0)) |
| while (vport->ct_flags && timeout) |
| timeout = schedule_timeout(timeout); |
| else |
| lpfc_printf_log(vport->phba, KERN_WARNING, |
| LOG_VPORT, |
| "1829 CT command failed to " |
| "delete objects on fabric\n"); |
| } |
| /* First look for the Fabric ndlp */ |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); |
| if (!ndlp) { |
| /* Cannot find existing Fabric ndlp, allocate one */ |
| ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL); |
| if (!ndlp) |
| goto skip_logo; |
| lpfc_nlp_init(vport, ndlp, Fabric_DID); |
| /* Indicate free memory when release */ |
| NLP_SET_FREE_REQ(ndlp); |
| } else { |
| if (!NLP_CHK_NODE_ACT(ndlp)) |
| ndlp = lpfc_enable_node(vport, ndlp, |
| NLP_STE_UNUSED_NODE); |
| if (!ndlp) |
| goto skip_logo; |
| |
| /* Remove ndlp from vport npld list */ |
| lpfc_dequeue_node(vport, ndlp); |
| spin_lock_irq(&phba->ndlp_lock); |
| if (!NLP_CHK_FREE_REQ(ndlp)) |
| /* Indicate free memory when release */ |
| NLP_SET_FREE_REQ(ndlp); |
| else { |
| /* Skip this if ndlp is already in free mode */ |
| spin_unlock_irq(&phba->ndlp_lock); |
| goto skip_logo; |
| } |
| spin_unlock_irq(&phba->ndlp_lock); |
| } |
| vport->unreg_vpi_cmpl = VPORT_INVAL; |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) |
| timeout = schedule_timeout(timeout); |
| } |
| |
| if (!(phba->pport->load_flag & FC_UNLOADING)) |
| lpfc_discovery_wait(vport); |
| |
| skip_logo: |
| lpfc_cleanup(vport); |
| lpfc_sli_host_down(vport); |
| |
| lpfc_stop_vport_timers(vport); |
| |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { |
| lpfc_unreg_all_rpis(vport); |
| lpfc_unreg_default_rpis(vport); |
| /* |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) |
| * does the scsi_host_put() to release the vport. |
| */ |
| if (lpfc_mbx_unreg_vpi(vport)) |
| scsi_host_put(shost); |
| } else |
| scsi_host_put(shost); |
| |
| lpfc_free_vpi(phba, vport->vpi); |
| vport->work_port_events = 0; |
| spin_lock_irq(&phba->hbalock); |
| list_del_init(&vport->listentry); |
| spin_unlock_irq(&phba->hbalock); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1828 Vport Deleted.\n"); |
| scsi_host_put(shost); |
| return VPORT_OK; |
| } |
| |
| struct lpfc_vport ** |
| lpfc_create_vport_work_array(struct lpfc_hba *phba) |
| { |
| struct lpfc_vport *port_iterator; |
| struct lpfc_vport **vports; |
| int index = 0; |
| vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *), |
| GFP_KERNEL); |
| if (vports == NULL) |
| return NULL; |
| spin_lock_irq(&phba->hbalock); |
| list_for_each_entry(port_iterator, &phba->port_list, listentry) { |
| if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { |
| lpfc_printf_vlog(port_iterator, KERN_WARNING, LOG_VPORT, |
| "1801 Create vport work array FAILED: " |
| "cannot do scsi_host_get\n"); |
| continue; |
| } |
| vports[index++] = port_iterator; |
| } |
| spin_unlock_irq(&phba->hbalock); |
| return vports; |
| } |
| |
| void |
| lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) |
| { |
| int i; |
| if (vports == NULL) |
| return; |
| for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++) |
| scsi_host_put(lpfc_shost_from_vport(vports[i])); |
| kfree(vports); |
| } |
| |
| |
| /** |
| * lpfc_vport_reset_stat_data - Reset the statistical data for the vport |
| * @vport: Pointer to vport object. |
| * |
| * This function resets the statistical data for the vport. This function |
| * is called with the host_lock held |
| **/ |
| void |
| lpfc_vport_reset_stat_data(struct lpfc_vport *vport) |
| { |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; |
| |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
| if (!NLP_CHK_NODE_ACT(ndlp)) |
| continue; |
| if (ndlp->lat_data) |
| memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT * |
| sizeof(struct lpfc_scsicmd_bkt)); |
| } |
| } |
| |
| |
| /** |
| * lpfc_alloc_bucket - Allocate data buffer required for statistical data |
| * @vport: Pointer to vport object. |
| * |
| * This function allocates data buffer required for all the FC |
| * nodes of the vport to collect statistical data. |
| **/ |
| void |
| lpfc_alloc_bucket(struct lpfc_vport *vport) |
| { |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; |
| |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
| if (!NLP_CHK_NODE_ACT(ndlp)) |
| continue; |
| |
| kfree(ndlp->lat_data); |
| ndlp->lat_data = NULL; |
| |
| if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { |
| ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, |
| sizeof(struct lpfc_scsicmd_bkt), |
| GFP_ATOMIC); |
| |
| if (!ndlp->lat_data) |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, |
| "0287 lpfc_alloc_bucket failed to " |
| "allocate statistical data buffer DID " |
| "0x%x\n", ndlp->nlp_DID); |
| } |
| } |
| } |
| |
| /** |
| * lpfc_free_bucket - Free data buffer required for statistical data |
| * @vport: Pointer to vport object. |
| * |
| * Th function frees statistical data buffer of all the FC |
| * nodes of the vport. |
| **/ |
| void |
| lpfc_free_bucket(struct lpfc_vport *vport) |
| { |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; |
| |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
| if (!NLP_CHK_NODE_ACT(ndlp)) |
| continue; |
| |
| kfree(ndlp->lat_data); |
| ndlp->lat_data = NULL; |
| } |
| } |