ab8500_charger: Adds support for legacy USB chargers
A Legacy USB charger should be handled directly by the charger
driver.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 6ba7eff..d5a8bda 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -88,6 +88,9 @@
/* Step up/down delay in us */
#define STEP_UDELAY 1000
+/* Wait for enumeration before charging in ms */
+#define WAIT_FOR_USB_ENUMERATION 5 * 1000
+
#define CHARGER_STATUS_POLL 10 /* in ms */
/* UsbLineStatus register - usb types */
@@ -201,6 +204,7 @@
* charger is enabled
* @vbat Battery voltage
* @old_vbat Previously measured battery voltage
+ * @usb_device_is_unrecognised USB device is unrecognised by the hardware
* @autopower Indicate if we should have automatic pwron after pwrloss
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @parent: Pointer to the struct ab8500
@@ -219,6 +223,7 @@
* @check_usbchgnotok_work: Work for checking USB charger not ok status
* @kick_wd_work: Work for kicking the charger watchdog in case
* of ABB rev 1.* due to the watchog logic bug
+ * @attach_work: Work for checking the usb enumeration
* @ac_charger_attached_work: Work for checking if AC charger is still
* connected
* @usb_charger_attached_work: Work for checking if USB charger is still
@@ -243,6 +248,7 @@
bool vddadc_en_usb;
int vbat;
int old_vbat;
+ bool usb_device_is_unrecognised;
bool autopower;
bool autopower_cfg;
struct ab8500 *parent;
@@ -260,6 +266,7 @@
struct delayed_work check_hw_failure_work;
struct delayed_work check_usbchgnotok_work;
struct delayed_work kick_wd_work;
+ struct delayed_work attach_work;
struct delayed_work ac_charger_attached_work;
struct delayed_work usb_charger_attached_work;
struct work_struct ac_work;
@@ -597,6 +604,8 @@
{
int ret = 0;
+ di->usb_device_is_unrecognised = false;
+
switch (link_status) {
case USB_STAT_STD_HOST_NC:
case USB_STAT_STD_HOST_C_NS:
@@ -642,9 +651,15 @@
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
di->max_usb_in_curr);
break;
+ case USB_STAT_NOT_CONFIGURED:
+ if (di->vbus_detected) {
+ di->usb_device_is_unrecognised = true;
+ dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ break;
+ }
case USB_STAT_HM_IDGND:
case USB_STAT_NOT_VALID_LINK:
- case USB_STAT_NOT_CONFIGURED:
dev_err(di->dev, "USB Type - Charging not allowed\n");
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
ret = -ENXIO;
@@ -1912,6 +1927,29 @@
}
/**
+ * ab8500_charger_usb_link_attach_work() - delayd work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+ struct ab8500_charger *di =
+ container_of(work, struct ab8500_charger, attach_work.work);
+ int ret;
+
+ /* Update maximum input current if USB enumeration is not detected */
+ if (!di->usb.charger_online) {
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret)
+ return;
+ }
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
* ab8500_charger_usb_link_status_work() - work to detect USB type
* @work: pointer to the work_struct structure
*
@@ -1937,23 +1975,29 @@
di->vbus_detected = 0;
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else {
- di->vbus_detected = 1;
- ret = ab8500_charger_read_usb_type(di);
- if (!ret) {
- /* Update maximum input current */
- ret = ab8500_charger_set_vbus_in_curr(di,
- di->max_usb_in_curr);
- if (ret)
- return;
+ return;
+ }
- ab8500_charger_set_usb_connected(di, true);
- ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else if (ret == -ENXIO) {
- /* No valid charger type detected */
- ab8500_charger_set_usb_connected(di, false);
- ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ di->vbus_detected = 1;
+ ret = ab8500_charger_read_usb_type(di);
+ if (!ret) {
+ if (di->usb_device_is_unrecognised) {
+ dev_dbg(di->dev,
+ "Potential Legacy Charger device. "
+ "Delay work for %d msec for USB enum "
+ "to finish",
+ WAIT_FOR_USB_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_FOR_USB_ENUMERATION));
+ } else {
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work, 0);
}
+ } else if (ret == -ENXIO) {
+ /* No valid charger type detected */
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
}
}
@@ -2911,6 +2955,9 @@
INIT_DEFERRABLE_WORK(&di->check_vbat_work,
ab8500_charger_check_vbat_work);
+ INIT_DELAYED_WORK(&di->attach_work,
+ ab8500_charger_usb_link_attach_work);
+
/* Init work for charger detection */
INIT_WORK(&di->usb_link_status_work,
ab8500_charger_usb_link_status_work);