diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index bd2c580..f9d486f 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -310,6 +310,19 @@
 	bf->skb = NULL;
 }
 
+static inline void ath5k_rxbuf_free(struct ath5k_softc *sc,
+				struct ath5k_buf *bf)
+{
+	BUG_ON(!bf);
+	if (!bf->skb)
+		return;
+	pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+			PCI_DMA_FROMDEVICE);
+	dev_kfree_skb_any(bf->skb);
+	bf->skb = NULL;
+}
+
+
 /* Queues setup */
 static struct 	ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
 				int qtype, int subtype);
@@ -1343,7 +1356,7 @@
 	list_for_each_entry(bf, &sc->txbuf, list)
 		ath5k_txbuf_free(sc, bf);
 	list_for_each_entry(bf, &sc->rxbuf, list)
-		ath5k_txbuf_free(sc, bf);
+		ath5k_rxbuf_free(sc, bf);
 
 	/* Free memory associated with all descriptors */
 	pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 29251f8..791f1ac 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -131,8 +131,18 @@
 	u32 dtim;
 };
 
+struct ath_legacy_rc_stats {
+	u32 success;
+};
+
+struct ath_11n_rc_stats {
+	u32 success;
+};
+
 struct ath_stats {
 	struct ath_interrupt_stats istats;
+	struct ath_legacy_rc_stats legacy_rcstats[12]; /* max(11a,11b,11g) */
+	struct ath_11n_rc_stats n_rcstats[16]; /* 0..15 MCS rates */
 };
 
 struct ath9k_debug {
@@ -141,6 +151,7 @@
 	struct dentry *debugfs_phy;
 	struct dentry *debugfs_dma;
 	struct dentry *debugfs_interrupt;
+	struct dentry *debugfs_rcstat;
 	struct ath_stats stats;
 };
 
@@ -148,6 +159,7 @@
 int ath9k_init_debug(struct ath_softc *sc);
 void ath9k_exit_debug(struct ath_softc *sc);
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
+void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb);
 
 #else
 
@@ -170,6 +182,11 @@
 {
 }
 
+static inline void ath_debug_stat_rc(struct ath_softc *sc,
+				     struct sk_buff *skb)
+{
+}
+
 #endif /* CONFIG_ATH9K_DEBUG */
 
 struct ath_config {
@@ -233,7 +250,6 @@
 #define bf_isht(bf)		(bf->bf_state.bf_type & BUF_HT)
 #define bf_isretried(bf)	(bf->bf_state.bf_type & BUF_RETRY)
 #define bf_isxretried(bf)	(bf->bf_state.bf_type & BUF_XRETRY)
-#define bf_isshpreamble(bf)	(bf->bf_state.bf_type & BUF_SHORT_PREAMBLE)
 #define bf_isbar(bf)		(bf->bf_state.bf_type & BUF_BAR)
 #define bf_ispspoll(bf) 	(bf->bf_state.bf_type & BUF_PSPOLL)
 #define bf_isaggrburst(bf)	(bf->bf_state.bf_type & BUF_AGGR_BURST)
@@ -600,6 +616,8 @@
 /********************/
 
 #define ATH_LED_PIN	1
+#define ATH_LED_ON_DURATION_IDLE	350	/* in msecs */
+#define ATH_LED_OFF_DURATION_IDLE	250	/* in msecs */
 
 enum ath_led_type {
 	ATH_LED_RADIO,
@@ -656,12 +674,6 @@
 #define ATH_RSSI_DUMMY_MARKER   0x127
 #define ATH_RATE_DUMMY_MARKER   0
 
-enum PROT_MODE {
-	PROT_M_NONE = 0,
-	PROT_M_RTSCTS,
-	PROT_M_CTSONLY
-};
-
 #define SC_OP_INVALID		BIT(0)
 #define SC_OP_BEACONS		BIT(1)
 #define SC_OP_RXAGGR		BIT(2)
@@ -677,6 +689,7 @@
 #define SC_OP_RFKILL_SW_BLOCKED	BIT(12)
 #define SC_OP_RFKILL_HW_BLOCKED	BIT(13)
 #define SC_OP_WAIT_FOR_BEACON	BIT(14)
+#define SC_OP_LED_ON		BIT(15)
 
 struct ath_bus_ops {
 	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
@@ -712,7 +725,6 @@
 	u8 sc_splitmic;
 	atomic_t ps_usecount;
 	enum ath9k_int sc_imask;
-	enum PROT_MODE sc_protmode;
 	enum ath9k_ht_extprotspacing sc_ht_extprotspacing;
 	enum ath9k_ht_macmode tx_chan_width;
 
@@ -725,10 +737,17 @@
 	struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
 	struct ath_rate_table *cur_rate_table;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+
 	struct ath_led radio_led;
 	struct ath_led assoc_led;
 	struct ath_led tx_led;
 	struct ath_led rx_led;
+	struct delayed_work ath_led_blink_work;
+	int led_on_duration;
+	int led_off_duration;
+	int led_on_cnt;
+	int led_off_cnt;
+
 	struct ath_rfkill rf_kill;
 	struct ath_ani sc_ani;
 	struct ath9k_node_stats sc_halstats;
diff --git a/drivers/net/wireless/ath9k/debug.c b/drivers/net/wireless/ath9k/debug.c
index 1680164..6181e49 100644
--- a/drivers/net/wireless/ath9k/debug.c
+++ b/drivers/net/wireless/ath9k/debug.c
@@ -222,6 +222,98 @@
 	.owner = THIS_MODULE
 };
 
+static void ath_debug_stat_11n_rc(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_tx_info_priv *tx_info_priv = NULL;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_rate *rates = tx_info->status.rates;
+	int final_ts_idx, idx;
+
+	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	final_ts_idx = tx_info_priv->tx.ts_rateindex;
+	idx = sc->cur_rate_table->info[rates[final_ts_idx].idx].dot11rate;
+
+	sc->sc_debug.stats.n_rcstats[idx].success++;
+}
+
+static void ath_debug_stat_legacy_rc(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_tx_info_priv *tx_info_priv = NULL;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_rate *rates = tx_info->status.rates;
+	int final_ts_idx, idx;
+
+	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	final_ts_idx = tx_info_priv->tx.ts_rateindex;
+	idx = rates[final_ts_idx].idx;
+
+	sc->sc_debug.stats.legacy_rcstats[idx].success++;
+}
+
+void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
+{
+	if (conf_is_ht(&sc->hw->conf))
+		ath_debug_stat_11n_rc(sc, skb);
+	else
+		ath_debug_stat_legacy_rc(sc, skb);
+}
+
+static ssize_t ath_read_file_stat_11n_rc(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[512];
+	unsigned int len = 0;
+	int i = 0;
+
+	len += sprintf(buf, "%7s %13s\n\n", "Rate", "Success");
+
+	for (i = 0; i <= 15; i++) {
+		len += snprintf(buf + len, sizeof(buf) - len,
+				"%5s%3d: %8u\n", "MCS", i,
+				sc->sc_debug.stats.n_rcstats[i].success);
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath_read_file_stat_legacy_rc(struct file *file,
+					    char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[512];
+	unsigned int len = 0;
+	int i = 0;
+
+	len += sprintf(buf, "%7s %13s\n\n", "Rate", "Success");
+
+	for (i = 0; i < sc->cur_rate_table->rate_cnt; i++) {
+		len += snprintf(buf + len, sizeof(buf) - len, "%5u: %12u\n",
+				sc->cur_rate_table->info[i].ratekbps / 1000,
+				sc->sc_debug.stats.legacy_rcstats[i].success);
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+
+	if (conf_is_ht(&sc->hw->conf))
+		return ath_read_file_stat_11n_rc(file, user_buf, count, ppos);
+	else
+		return ath_read_file_stat_legacy_rc(file, user_buf, count ,ppos);
+}
+
+static const struct file_operations fops_rcstat = {
+	.read = read_file_rcstat,
+	.open = ath9k_debugfs_open,
+	.owner = THIS_MODULE
+};
 
 int ath9k_init_debug(struct ath_softc *sc)
 {
@@ -248,6 +340,13 @@
 	if (!sc->sc_debug.debugfs_interrupt)
 		goto err;
 
+	sc->sc_debug.debugfs_rcstat = debugfs_create_file("rcstat",
+						  S_IRUGO,
+						  sc->sc_debug.debugfs_phy,
+						  sc, &fops_rcstat);
+	if (!sc->sc_debug.debugfs_rcstat)
+		goto err;
+
 	return 0;
 err:
 	ath9k_exit_debug(sc);
@@ -256,6 +355,7 @@
 
 void ath9k_exit_debug(struct ath_softc *sc)
 {
+	debugfs_remove(sc->sc_debug.debugfs_rcstat);
 	debugfs_remove(sc->sc_debug.debugfs_interrupt);
 	debugfs_remove(sc->sc_debug.debugfs_dma);
 	debugfs_remove(sc->sc_debug.debugfs_phy);
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 7728234..00ed44a 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -267,7 +267,7 @@
 
 static void ath9k_hw_disablepcie(struct ath_hal *ah)
 {
-	if (!AR_SREV_9100(ah))
+	if (AR_SREV_9100(ah))
 		return;
 
 	REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath9k/mac.c
index ef832a5..2427c44 100644
--- a/drivers/net/wireless/ath9k/mac.c
+++ b/drivers/net/wireless/ath9k/mac.c
@@ -344,9 +344,6 @@
 	struct ar5416_desc *last_ads = AR5416DESC(lastds);
 	u32 ds_ctl0;
 
-	(void) nseries;
-	(void) rtsctsDuration;
-
 	if (flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA)) {
 		ds_ctl0 = ads->ds_ctl0;
 
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index d8e8266..1c0f893 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -935,6 +935,32 @@
 /*	 LED functions		*/
 /********************************/
 
+static void ath_led_blink_work(struct work_struct *work)
+{
+	struct ath_softc *sc = container_of(work, struct ath_softc,
+					    ath_led_blink_work.work);
+
+	if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
+		return;
+	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
+			  (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
+
+	queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work,
+			   (sc->sc_flags & SC_OP_LED_ON) ?
+			   msecs_to_jiffies(sc->led_off_duration) :
+			   msecs_to_jiffies(sc->led_on_duration));
+
+	sc->led_on_duration =
+			max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25);
+	sc->led_off_duration =
+			max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10);
+	sc->led_on_cnt = sc->led_off_cnt = 0;
+	if (sc->sc_flags & SC_OP_LED_ON)
+		sc->sc_flags &= ~SC_OP_LED_ON;
+	else
+		sc->sc_flags |= SC_OP_LED_ON;
+}
+
 static void ath_led_brightness(struct led_classdev *led_cdev,
 			       enum led_brightness brightness)
 {
@@ -944,16 +970,27 @@
 	switch (brightness) {
 	case LED_OFF:
 		if (led->led_type == ATH_LED_ASSOC ||
-		    led->led_type == ATH_LED_RADIO)
+		    led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
+				(led->led_type == ATH_LED_RADIO));
 			sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-		ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
-				(led->led_type == ATH_LED_RADIO) ? 1 :
-				!!(sc->sc_flags & SC_OP_LED_ASSOCIATED));
+			if (led->led_type == ATH_LED_RADIO)
+				sc->sc_flags &= ~SC_OP_LED_ON;
+		} else {
+			sc->led_off_cnt++;
+		}
 		break;
 	case LED_FULL:
-		if (led->led_type == ATH_LED_ASSOC)
+		if (led->led_type == ATH_LED_ASSOC) {
 			sc->sc_flags |= SC_OP_LED_ASSOCIATED;
-		ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
+			queue_delayed_work(sc->hw->workqueue,
+					   &sc->ath_led_blink_work, 0);
+		} else if (led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
+			sc->sc_flags |= SC_OP_LED_ON;
+		} else {
+			sc->led_on_cnt++;
+		}
 		break;
 	default:
 		break;
@@ -989,6 +1026,7 @@
 
 static void ath_deinit_leds(struct ath_softc *sc)
 {
+	cancel_delayed_work_sync(&sc->ath_led_blink_work);
 	ath_unregister_led(&sc->assoc_led);
 	sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
 	ath_unregister_led(&sc->tx_led);
@@ -1008,9 +1046,11 @@
 	/* LED off, active low */
 	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
 
+	INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
+
 	trigger = ieee80211_get_radio_led_name(sc->hw);
 	snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
-		"ath9k-%s:radio", wiphy_name(sc->hw->wiphy));
+		"ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
 	ret = ath_register_led(sc, &sc->radio_led, trigger);
 	sc->radio_led.led_type = ATH_LED_RADIO;
 	if (ret)
@@ -1018,7 +1058,7 @@
 
 	trigger = ieee80211_get_assoc_led_name(sc->hw);
 	snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
-		"ath9k-%s:assoc", wiphy_name(sc->hw->wiphy));
+		"ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
 	ret = ath_register_led(sc, &sc->assoc_led, trigger);
 	sc->assoc_led.led_type = ATH_LED_ASSOC;
 	if (ret)
@@ -1026,7 +1066,7 @@
 
 	trigger = ieee80211_get_tx_led_name(sc->hw);
 	snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
-		"ath9k-%s:tx", wiphy_name(sc->hw->wiphy));
+		"ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
 	ret = ath_register_led(sc, &sc->tx_led, trigger);
 	sc->tx_led.led_type = ATH_LED_TX;
 	if (ret)
@@ -1034,7 +1074,7 @@
 
 	trigger = ieee80211_get_rx_led_name(sc->hw);
 	snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
-		"ath9k-%s:rx", wiphy_name(sc->hw->wiphy));
+		"ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
 	ret = ath_register_led(sc, &sc->rx_led, trigger);
 	sc->rx_led.led_type = ATH_LED_RX;
 	if (ret)
@@ -1217,7 +1257,7 @@
 	}
 
 	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
-		"ath9k-%s:rfkill", wiphy_name(sc->hw->wiphy));
+		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
 	sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name;
 	sc->rf_kill.rfkill->data = sc;
 	sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio;
@@ -1957,25 +1997,6 @@
 	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
 		sc->sc_imask |= ATH9K_INT_CST;
 
-	/*
-	 * Enable MIB interrupts when there are hardware phy counters.
-	 * Note we only do this (at the moment) for station mode.
-	 */
-	if (ath9k_hw_phycounters(sc->sc_ah) &&
-	    ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) ||
-	     (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC)))
-		sc->sc_imask |= ATH9K_INT_MIB;
-	/*
-	 * Some hardware processes the TIM IE and fires an
-	 * interrupt when the TIM bit is set.  For hardware
-	 * that does, if not overridden by configuration,
-	 * enable the TIM interrupt when operating as station.
-	 */
-	if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
-	    (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) &&
-	    !sc->sc_config.swBeaconProcess)
-		sc->sc_imask |= ATH9K_INT_TIM;
-
 	ath_cache_conf_rate(sc, &hw->conf);
 
 	sc->sc_flags &= ~SC_OP_INVALID;
@@ -2124,6 +2145,27 @@
 	/* Set the device opmode */
 	sc->sc_ah->ah_opmode = ic_opmode;
 
+	/*
+	 * Enable MIB interrupts when there are hardware phy counters.
+	 * Note we only do this (at the moment) for station mode.
+	 */
+	if (ath9k_hw_phycounters(sc->sc_ah) &&
+	    ((conf->type == NL80211_IFTYPE_STATION) ||
+	     (conf->type == NL80211_IFTYPE_ADHOC)))
+		sc->sc_imask |= ATH9K_INT_MIB;
+	/*
+	 * Some hardware processes the TIM IE and fires an
+	 * interrupt when the TIM bit is set.  For hardware
+	 * that does, if not overridden by configuration,
+	 * enable the TIM interrupt when operating as station.
+	 */
+	if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
+	    (conf->type == NL80211_IFTYPE_STATION) &&
+	    !sc->sc_config.swBeaconProcess)
+		sc->sc_imask |= ATH9K_INT_TIM;
+
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+
 	if (conf->type == NL80211_IFTYPE_AP) {
 		/* TODO: is this a suitable place to start ANI for AP mode? */
 		/* Start ANI */
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index eb557ad..704b627 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -631,8 +631,7 @@
 static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
 			     struct ath_rate_table *rate_table,
-			     int probe_allowed, int *is_probing,
-			     int is_retry)
+			     int *is_probing)
 {
 	u32 dt, best_thruput, this_thruput, now_msec;
 	u8 rate, next_rate, best_rate, maxindex, minindex;
@@ -714,13 +713,6 @@
 	}
 
 	rate = best_rate;
-
-	/* if we are retrying for more than half the number
-	 * of max retries, use the min rate for the next retry
-	 */
-	if (is_retry)
-		rate = ath_rc_priv->valid_rate_index[minindex];
-
 	ath_rc_priv->rssi_last_lookup = rssi_last;
 
 	/*
@@ -728,13 +720,12 @@
 	 * non-monoticity of 11g's rate table
 	 */
 
-	if (rate >= ath_rc_priv->rate_max_phy && probe_allowed) {
+	if (rate >= ath_rc_priv->rate_max_phy) {
 		rate = ath_rc_priv->rate_max_phy;
 
 		/* Probe the next allowed phy state */
-		/* FIXME:XXXX Check to make sure ratMax is checked properly */
 		if (ath_rc_get_nextvalid_txrate(rate_table,
-						ath_rc_priv, rate, &next_rate) &&
+					ath_rc_priv, rate, &next_rate) &&
 		    (now_msec - ath_rc_priv->probe_time >
 		     rate_table->probe_interval) &&
 		    (ath_rc_priv->hw_maxretry_pktcnt >= 1)) {
@@ -756,14 +747,17 @@
 	return rate;
 }
 
-static void ath_rc_rate_set_series(struct ath_rate_table *rate_table ,
+static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
 				   struct ieee80211_tx_rate *rate,
+				   struct ieee80211_tx_rate_control *txrc,
 				   u8 tries, u8 rix, int rtsctsenable)
 {
 	rate->count = tries;
 	rate->idx = rix;
 
-	if (rtsctsenable)
+	if (txrc->short_preamble)
+		rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
+	if (txrc->rts || rtsctsenable)
 		rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS;
 	if (WLAN_RC_PHY_40(rate_table->info[rix].phy))
 		rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
@@ -773,6 +767,43 @@
 		rate->flags |= IEEE80211_TX_RC_MCS;
 }
 
+static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
+				   struct ath_rate_table *rate_table,
+				   struct ieee80211_tx_info *tx_info)
+{
+	struct ieee80211_tx_rate *rates = tx_info->control.rates;
+	int i = 0, rix = 0, cix, enable_g_protection = 0;
+
+	/* get the cix for the lowest valid rix */
+	for (i = 3; i >= 0; i--) {
+		if (rates[i].count && (rates[i].idx >= 0)) {
+			rix = rates[i].idx;
+			break;
+		}
+	}
+	cix = rate_table->info[rix].ctrl_rate;
+
+	/* All protection frames are transmited at 2Mb/s for 802.11g,
+	 * otherwise we transmit them at 1Mb/s */
+	if (sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ &&
+	    !conf_is_ht(&sc->hw->conf))
+		enable_g_protection = 1;
+
+	/*
+	 * If 802.11g protection is enabled, determine whether to use RTS/CTS or
+	 * just CTS.  Note that this is only done for OFDM/HT unicast frames.
+	 */
+	if ((sc->sc_flags & SC_OP_PROTECT_ENABLE) &&
+	    !(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	    (rate_table->info[rix].phy == WLAN_RC_PHY_OFDM ||
+	     WLAN_RC_PHY_HT(rate_table->info[rix].phy))) {
+		rates[0].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT;
+		cix = rate_table->info[enable_g_protection].ctrl_rate;
+	}
+
+	tx_info->control.rts_cts_rate_idx = cix;
+}
+
 static u8 ath_rc_rate_getidx(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
 			     struct ath_rate_table *rate_table,
@@ -804,54 +835,56 @@
 
 static void ath_rc_ratefind(struct ath_softc *sc,
 			    struct ath_rate_priv *ath_rc_priv,
-			    int num_tries, int num_rates,
-			    struct ieee80211_tx_info *tx_info, int *is_probe,
-			    int is_retry)
+			    struct ieee80211_tx_rate_control *txrc)
 {
-	u8 try_per_rate = 0, i = 0, rix, nrix;
 	struct ath_rate_table *rate_table;
+	struct sk_buff *skb = txrc->skb;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	__le16 fc = hdr->frame_control;
+	u8 try_per_rate = 0, i = 0, rix, nrix;
+	int is_probe = 0;
 
 	rate_table = sc->cur_rate_table;
-	rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, 1,
-				 is_probe, is_retry);
+	rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, &is_probe);
 	nrix = rix;
 
-	if (*is_probe) {
+	if (is_probe) {
 		/* set one try for probe rates. For the
 		 * probes don't enable rts */
-		ath_rc_rate_set_series(rate_table,
-			&rates[i++], 1, nrix, 0);
+		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
+				       1, nrix, 0);
 
-		try_per_rate = (num_tries/num_rates);
+		try_per_rate = (ATH_11N_TXMAXTRY/4);
 		/* Get the next tried/allowed rate. No RTS for the next series
 		 * after the probe rate
 		 */
-		nrix = ath_rc_rate_getidx(sc,
-			ath_rc_priv, rate_table, nrix, 1, 0);
-		ath_rc_rate_set_series(rate_table,
-			&rates[i++], try_per_rate, nrix, 0);
+		nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
+					  rate_table, nrix, 1, 0);
+		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
+				       try_per_rate, nrix, 0);
 	} else {
-		try_per_rate = (num_tries/num_rates);
+		try_per_rate = (ATH_11N_TXMAXTRY/4);
 		/* Set the choosen rate. No RTS for first series entry. */
-		ath_rc_rate_set_series(rate_table,
-			&rates[i++], try_per_rate, nrix, 0);
+		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
+				       try_per_rate, nrix, 0);
 	}
 
 	/* Fill in the other rates for multirate retry */
-	for ( ; i < num_rates; i++) {
+	for ( ; i < 4; i++) {
 		u8 try_num;
 		u8 min_rate;
 
-		try_num = ((i + 1) == num_rates) ?
-			num_tries - (try_per_rate * i) : try_per_rate ;
-		min_rate = (((i + 1) == num_rates) && 0);
+		try_num = ((i + 1) == 4) ?
+			ATH_11N_TXMAXTRY - (try_per_rate * i) : try_per_rate ;
+		min_rate = (((i + 1) == 4) && 0);
 
 		nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
 					  rate_table, nrix, 1, min_rate);
 		/* All other rates in the series have RTS enabled */
-		ath_rc_rate_set_series(rate_table,
-				       &rates[i], try_num, nrix, 1);
+		ath_rc_rate_set_series(rate_table, &rates[i], txrc,
+				       try_num, nrix, 1);
 	}
 
 	/*
@@ -880,6 +913,24 @@
 			rates[3].flags = rates[2].flags;
 		}
 	}
+
+	/*
+	 * Force hardware to use computed duration for next
+	 * fragment by disabling multi-rate retry, which
+	 * updates duration based on the multi-rate duration table.
+	 *
+	 * FIXME: Fix duration
+	 */
+	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	    (ieee80211_has_morefrags(fc) ||
+	     (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG))) {
+		rates[1].count = rates[2].count = rates[3].count = 0;
+		rates[1].idx = rates[2].idx = rates[3].idx = 0;
+		rates[0].count = ATH_TXMAXTRY;
+	}
+
+	/* Setup RTS/CTS */
+	ath_rc_rate_set_rtscts(sc, rate_table, tx_info);
 }
 
 static bool ath_rc_update_per(struct ath_softc *sc,
@@ -1394,16 +1445,16 @@
 	if (!rateset->rs_nrates) {
 		/* No working rate, just initialize valid rates */
 		hi = ath_rc_init_validrates(ath_rc_priv, rate_table,
-						ath_rc_priv->ht_cap);
+					    ath_rc_priv->ht_cap);
 	} else {
 		/* Use intersection of working rates and valid rates */
 		hi = ath_rc_setvalid_rates(ath_rc_priv, rate_table,
-					       rateset, ath_rc_priv->ht_cap);
+					   rateset, ath_rc_priv->ht_cap);
 		if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) {
 			hthi = ath_rc_setvalid_htrates(ath_rc_priv,
-							   rate_table,
-							   ht_mcs,
-							   ath_rc_priv->ht_cap);
+						       rate_table,
+						       ht_mcs,
+						       ath_rc_priv->ht_cap);
 		}
 		hi = A_MAX(hi, hthi);
 	}
@@ -1479,6 +1530,22 @@
 			 (is_underrun) ? ATH_11N_TXMAXTRY :
 			 tx_info_priv->tx.ts_longretry);
 
+	/* Check if aggregation has to be enabled for this tid */
+	if (conf_is_ht(&sc->hw->conf)) {
+		if (ieee80211_is_data_qos(fc)) {
+			u8 *qc, tid;
+			struct ath_node *an;
+
+			qc = ieee80211_get_qos_ctl(hdr);
+			tid = qc[0] & 0xf;
+			an = (struct ath_node *)sta->drv_priv;
+
+			if(ath_tx_aggr_check(sc, an, tid))
+				ieee80211_start_tx_ba_session(sc->hw, hdr->addr1, tid);
+		}
+	}
+
+	ath_debug_stat_rc(sc, skb);
 exit:
 	kfree(tx_info_priv);
 }
@@ -1489,11 +1556,9 @@
 	struct ieee80211_supported_band *sband = txrc->sband;
 	struct sk_buff *skb = txrc->skb;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct ath_softc *sc = priv;
-	struct ieee80211_hw *hw = sc->hw;
-	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	int is_probe = 0;
+	struct ath_softc *sc = priv;
+	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	__le16 fc = hdr->frame_control;
 
 	/* lowest rate for management and multicast/broadcast frames */
@@ -1506,23 +1571,7 @@
 	}
 
 	/* Find tx rate for unicast frames */
-	ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4,
-			tx_info, &is_probe, false);
-
-	/* Check if aggregation has to be enabled for this tid */
-	if (conf_is_ht(&hw->conf)) {
-		if (ieee80211_is_data_qos(fc)) {
-			u8 *qc, tid;
-			struct ath_node *an;
-
-			qc = ieee80211_get_qos_ctl(hdr);
-			tid = qc[0] & 0xf;
-			an = (struct ath_node *)sta->drv_priv;
-
-			if(ath_tx_aggr_check(sc, an, tid))
-				ieee80211_start_tx_ba_session(hw, hdr->addr1, tid);
-		}
-	}
+	ath_rc_ratefind(sc, ath_rc_priv, txrc);
 }
 
 static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h
index 150eda5..c967b79 100644
--- a/drivers/net/wireless/ath9k/reg.h
+++ b/drivers/net/wireless/ath9k/reg.h
@@ -1198,18 +1198,7 @@
 #define AR_CFP_VAL          0x0000FFFF
 
 #define AR_RX_FILTER        0x803C
-#define AR_RX_FILTER_ALL    0x00000000
-#define AR_RX_UCAST         0x00000001
-#define AR_RX_MCAST         0x00000002
-#define AR_RX_BCAST         0x00000004
-#define AR_RX_CONTROL       0x00000008
-#define AR_RX_BEACON        0x00000010
-#define AR_RX_PROM          0x00000020
-#define AR_RX_PROBE_REQ     0x00000080
-#define AR_RX_MY_BEACON     0x00000200
 #define AR_RX_COMPR_BAR     0x00000400
-#define AR_RX_COMPR_BA      0x00000800
-#define AR_RX_UNCOM_BA_BAR  0x00001000
 
 #define AR_MCAST_FIL0       0x8040
 #define AR_MCAST_FIL1       0x8044
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath9k/regd.c
index ec88f78..fe08a4f 100644
--- a/drivers/net/wireless/ath9k/regd.c
+++ b/drivers/net/wireless/ath9k/regd.c
@@ -154,12 +154,20 @@
 	}
 }
 
-/* Enable adhoc on 5 GHz if allowed by 11d */
-static void ath9k_reg_apply_5ghz_adhoc_flags(struct wiphy *wiphy,
+/* Frequency is one where radar detection is required */
+static bool ath9k_is_radar_freq(u16 center_freq)
+{
+	return (center_freq >= 5260 && center_freq <= 5700);
+}
+
+/*
+ * Enable adhoc on 5 GHz if allowed by 11d.
+ * Remove passive scan if channel is allowed by 11d,
+ * except when on radar frequencies.
+ */
+static void ath9k_reg_apply_5ghz_beaconing_flags(struct wiphy *wiphy,
 					     enum reg_set_by setby)
 {
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_softc *sc = hw->priv;
 	struct ieee80211_supported_band *sband;
 	const struct ieee80211_reg_rule *reg_rule;
 	struct ieee80211_channel *ch;
@@ -169,8 +177,7 @@
 
 	if (setby != REGDOM_SET_BY_COUNTRY_IE)
 		return;
-	if (!test_bit(ATH9K_MODE_11A,
-	    sc->sc_ah->ah_caps.wireless_modes))
+	if (!wiphy->bands[IEEE80211_BAND_5GHZ])
 		return;
 
 	sband = wiphy->bands[IEEE80211_BAND_5GHZ];
@@ -185,7 +192,11 @@
 		 * it by applying our static world regdomain by default during
 		 * probe */
 		if (!(reg_rule->flags & NL80211_RRF_NO_IBSS))
-			ch->flags &= ~NL80211_RRF_NO_IBSS;
+			ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
+		if (!ath9k_is_radar_freq(ch->center_freq))
+			continue;
+		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
+			ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
 	}
 }
 
@@ -250,9 +261,7 @@
 
 	for (i = 0; i < sband->n_channels; i++) {
 		ch = &sband->channels[i];
-		if (ch->center_freq < 5260)
-			continue;
-		if (ch->center_freq > 5700)
+		if (!ath9k_is_radar_freq(ch->center_freq))
 			continue;
 		/* We always enable radar detection/DFS on this
 		 * frequency range. Additionally we also apply on
@@ -282,10 +291,10 @@
 	case 0x63:
 	case 0x66:
 	case 0x67:
-		ath9k_reg_apply_5ghz_adhoc_flags(wiphy, setby);
+		ath9k_reg_apply_5ghz_beaconing_flags(wiphy, setby);
 		break;
 	case 0x68:
-		ath9k_reg_apply_5ghz_adhoc_flags(wiphy, setby);
+		ath9k_reg_apply_5ghz_beaconing_flags(wiphy, setby);
 		ath9k_reg_apply_active_scan_flags(wiphy, setby);
 		break;
 	}
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 007ca91..e14bcea 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -677,6 +677,7 @@
 		txtid = ATH_AN_2_TID(an, tid);
 		txtid->state |= AGGR_ADDBA_PROGRESS;
 		ath_tx_pause_tid(sc, txtid);
+		*ssn = txtid->seq_start;
 	}
 
 	return 0;
@@ -1385,8 +1386,6 @@
 
 	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
 		flags |= ATH9K_TXDESC_NOACK;
-	if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
-		flags |= ATH9K_TXDESC_RTSENA;
 
 	return flags;
 }
@@ -1432,137 +1431,86 @@
 
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 {
-	struct ath_hal *ah = sc->sc_ah;
-	struct ath_rate_table *rt;
-	struct ath_desc *ds = bf->bf_desc;
-	struct ath_desc *lastds = bf->bf_lastbf->bf_desc;
+	struct ath_rate_table *rt = sc->cur_rate_table;
 	struct ath9k_11n_rate_series series[4];
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
-	struct ieee80211_hdr *hdr;
-	struct ieee80211_hw *hw = sc->hw;
-	int i, flags, rtsctsena = 0, enable_g_protection = 0;
-	u32 ctsduration = 0;
-	u8 rix = 0, cix, ctsrate = 0;
-	__le16 fc;
+	int i, flags = 0;
+	u8 rix = 0, ctsrate = 0;
 
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 
 	skb = (struct sk_buff *)bf->bf_mpdu;
-	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = hdr->frame_control;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
 
-	if (ieee80211_has_morefrags(fc) ||
-	    (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
-		rates[1].count = rates[2].count = rates[3].count = 0;
-		rates[1].idx = rates[2].idx = rates[3].idx = 0;
-		rates[0].count = ATH_TXMAXTRY;
-	}
-
-	/* get the cix for the lowest valid rix */
-	rt = sc->cur_rate_table;
-	for (i = 3; i >= 0; i--) {
-		if (rates[i].count && (rates[i].idx >= 0)) {
-			rix = rates[i].idx;
-			break;
-		}
-	}
-
-	flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA));
-	cix = rt->info[rix].ctrl_rate;
-
-	/* All protection frames are transmited at 2Mb/s for 802.11g,
-	 * otherwise we transmit them at 1Mb/s */
-	if (hw->conf.channel->band == IEEE80211_BAND_2GHZ &&
-	  !conf_is_ht(&hw->conf))
-		enable_g_protection = 1;
+	/*
+	 * We check if Short Preamble is needed for the CTS rate by
+	 * checking the BSS's global flag.
+	 * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
+	 */
+	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
+		ctsrate = rt->info[tx_info->control.rts_cts_rate_idx].ratecode |
+			rt->info[tx_info->control.rts_cts_rate_idx].short_preamble;
+	else
+		ctsrate = rt->info[tx_info->control.rts_cts_rate_idx].ratecode;
 
 	/*
-	 * If 802.11g protection is enabled, determine whether to use RTS/CTS or
-	 * just CTS.  Note that this is only done for OFDM/HT unicast frames.
+	 * ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive.
+	 * Check the first rate in the series to decide whether RTS/CTS
+	 * or CTS-to-self has to be used.
 	 */
-	if (sc->sc_protmode != PROT_M_NONE && !(bf->bf_flags & ATH9K_TXDESC_NOACK)
-	    && (rt->info[rix].phy == WLAN_RC_PHY_OFDM ||
-		WLAN_RC_PHY_HT(rt->info[rix].phy))) {
-		if (sc->sc_protmode == PROT_M_RTSCTS)
-			flags = ATH9K_TXDESC_RTSENA;
-		else if (sc->sc_protmode == PROT_M_CTSONLY)
-			flags = ATH9K_TXDESC_CTSENA;
+	if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+		flags = ATH9K_TXDESC_CTSENA;
+	else if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+		flags = ATH9K_TXDESC_RTSENA;
 
-		cix = rt->info[enable_g_protection].ctrl_rate;
-		rtsctsena = 1;
-	}
-
-	/* For 11n, the default behavior is to enable RTS for hw retried frames.
-	 * We enable the global flag here and let rate series flags determine
-	 * which rates will actually use RTS.
-	 */
-	if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf_isdata(bf)) {
-		/* 802.11g protection not needed, use our default behavior */
-		if (!rtsctsena)
-			flags = ATH9K_TXDESC_RTSENA;
-	}
-
-	/* Set protection if aggregate protection on */
+	/* FIXME: Handle aggregation protection */
 	if (sc->sc_config.ath_aggr_prot &&
 	    (!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) {
 		flags = ATH9K_TXDESC_RTSENA;
-		cix = rt->info[enable_g_protection].ctrl_rate;
-		rtsctsena = 1;
 	}
 
 	/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
-	if (bf_isaggr(bf) && (bf->bf_al > ah->ah_caps.rts_aggr_limit))
+	if (bf_isaggr(bf) && (bf->bf_al > sc->sc_ah->ah_caps.rts_aggr_limit))
 		flags &= ~(ATH9K_TXDESC_RTSENA);
 
-	/*
-	 * CTS transmit rate is derived from the transmit rate by looking in the
-	 * h/w rate table.  We must also factor in whether or not a short
-	 * preamble is to be used. NB: cix is set above where RTS/CTS is enabled
-	 */
-	ctsrate = rt->info[cix].ratecode |
-		(bf_isshpreamble(bf) ? rt->info[cix].short_preamble : 0);
-
 	for (i = 0; i < 4; i++) {
 		if (!rates[i].count || (rates[i].idx < 0))
 			continue;
 
 		rix = rates[i].idx;
-
-		series[i].Rate = rt->info[rix].ratecode |
-			(bf_isshpreamble(bf) ? rt->info[rix].short_preamble : 0);
-
 		series[i].Tries = rates[i].count;
+		series[i].ChSel = sc->sc_tx_chainmask;
 
-		series[i].RateFlags = (
-			(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) ?
-				ATH9K_RATESERIES_RTS_CTS : 0) |
-			((rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ?
-				ATH9K_RATESERIES_2040 : 0) |
-			((rates[i].flags & IEEE80211_TX_RC_SHORT_GI) ?
-				ATH9K_RATESERIES_HALFGI : 0);
+		if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+			series[i].Rate = rt->info[rix].ratecode |
+				rt->info[rix].short_preamble;
+		else
+			series[i].Rate = rt->info[rix].ratecode;
+
+		if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+		if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+			series[i].RateFlags |= ATH9K_RATESERIES_2040;
+		if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
+			series[i].RateFlags |= ATH9K_RATESERIES_HALFGI;
 
 		series[i].PktDuration = ath_pkt_duration(sc, rix, bf,
 			 (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) != 0,
 			 (rates[i].flags & IEEE80211_TX_RC_SHORT_GI),
-			 bf_isshpreamble(bf));
-
-		series[i].ChSel = sc->sc_tx_chainmask;
-
-		if (rtsctsena)
-			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+			 (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE));
 	}
 
 	/* set dur_update_en for l-sig computation except for PS-Poll frames */
-	ath9k_hw_set11n_ratescenario(ah, ds, lastds, !bf_ispspoll(bf),
-				     ctsrate, ctsduration,
-				     series, 4, flags);
+	ath9k_hw_set11n_ratescenario(sc->sc_ah, bf->bf_desc,
+				     bf->bf_lastbf->bf_desc,
+				     !bf_ispspoll(bf), ctsrate,
+				     0, series, 4, flags);
 
 	if (sc->sc_config.ath_aggr_prot && flags)
-		ath9k_hw_set11n_burstduration(ah, ds, 8192);
+		ath9k_hw_set11n_burstduration(sc->sc_ah, bf->bf_desc, 8192);
 }
 
 static int ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf,
@@ -1592,8 +1540,6 @@
 		bf->bf_state.bf_type |= BUF_BAR;
 	if (ieee80211_is_pspoll(fc))
 		bf->bf_state.bf_type |= BUF_PSPOLL;
-	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
-		bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE;
 	if ((conf_is_ht(&sc->hw->conf) && !is_pae(skb) &&
 	     (tx_info->flags & IEEE80211_TX_CTL_AMPDU)))
 		bf->bf_state.bf_type |= BUF_HT;
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 14a02b3..281ef83 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -6,6 +6,7 @@
 b43-y				+= phy_a.o
 b43-$(CONFIG_B43_NPHY)		+= phy_n.o
 b43-$(CONFIG_B43_PHY_LP)	+= phy_lp.o
+b43-$(CONFIG_B43_PHY_LP)	+= tables_lpphy.o
 b43-y				+= sysfs.o
 b43-y				+= xmit.o
 b43-y				+= lo.o
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index c5d9dc3..94d9e8b 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -3,7 +3,7 @@
   Broadcom B43 wireless driver
   IEEE 802.11g LP-PHY driver
 
-  Copyright (c) 2008 Michael Buesch <mb@bu3sch.de>
+  Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
@@ -25,6 +25,7 @@
 #include "b43.h"
 #include "phy_lp.h"
 #include "phy_common.h"
+#include "tables_lpphy.h"
 
 
 static int b43_lpphy_op_allocate(struct b43_wldev *dev)
@@ -57,8 +58,221 @@
 	dev->phy.lp = NULL;
 }
 
+static void lpphy_table_init(struct b43_wldev *dev)
+{
+	//TODO
+}
+
+static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
+{
+	B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
+}
+
+static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
+{
+	struct ssb_bus *bus = dev->dev->bus;
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+
+	b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
+	b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
+	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
+	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
+	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
+	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
+	b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
+	b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
+	b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
+	b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
+	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
+	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
+	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
+	b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
+	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
+	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
+	b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
+	b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
+	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
+	b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
+	b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
+	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
+	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
+	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
+	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
+	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
+		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
+	} else {
+		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
+		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
+	}
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
+	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
+	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
+	b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
+
+	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
+	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
+		b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
+		b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
+		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
+		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
+	} else /* 5GHz */
+		b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);
+
+	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
+	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
+	b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
+	b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
+	b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
+	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
+	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
+		      0x2000 | ((u16)lpphy->rssi_gs << 10) |
+		      ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
+}
+
+static void lpphy_baseband_init(struct b43_wldev *dev)
+{
+	lpphy_table_init(dev);
+	if (dev->phy.rev >= 2)
+		lpphy_baseband_rev2plus_init(dev);
+	else
+		lpphy_baseband_rev0_1_init(dev);
+}
+
+struct b2062_freqdata {
+	u16 freq;
+	u8 data[6];
+};
+
+/* Initialize the 2062 radio. */
+static void lpphy_2062_init(struct b43_wldev *dev)
+{
+	struct ssb_bus *bus = dev->dev->bus;
+	u32 crystalfreq, pdiv, tmp, ref;
+	unsigned int i;
+	const struct b2062_freqdata *fd = NULL;
+
+	static const struct b2062_freqdata freqdata_tab[] = {
+		{ .freq = 12000, .data[0] =  6, .data[1] =  6, .data[2] =  6,
+				 .data[3] =  6, .data[4] = 10, .data[5] =  6, },
+		{ .freq = 13000, .data[0] =  4, .data[1] =  4, .data[2] =  4,
+				 .data[3] =  4, .data[4] = 11, .data[5] =  7, },
+		{ .freq = 14400, .data[0] =  3, .data[1] =  3, .data[2] =  3,
+				 .data[3] =  3, .data[4] = 12, .data[5] =  7, },
+		{ .freq = 16200, .data[0] =  3, .data[1] =  3, .data[2] =  3,
+				 .data[3] =  3, .data[4] = 13, .data[5] =  8, },
+		{ .freq = 18000, .data[0] =  2, .data[1] =  2, .data[2] =  2,
+				 .data[3] =  2, .data[4] = 14, .data[5] =  8, },
+		{ .freq = 19200, .data[0] =  1, .data[1] =  1, .data[2] =  1,
+				 .data[3] =  1, .data[4] = 14, .data[5] =  9, },
+	};
+
+	b2062_upload_init_table(dev);
+
+	b43_radio_write(dev, B2062_N_TX_CTL3, 0);
+	b43_radio_write(dev, B2062_N_TX_CTL4, 0);
+	b43_radio_write(dev, B2062_N_TX_CTL5, 0);
+	b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
+	b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
+	b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
+	b43_radio_write(dev, B2062_N_CALIB_TS, 0);
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
+	else
+		b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1);
+
+	/* Get the crystal freq, in Hz. */
+	crystalfreq = bus->chipco.pmu.crystalfreq * 1000;
+
+	B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
+	B43_WARN_ON(crystalfreq == 0);
+
+	if (crystalfreq >= 30000000) {
+		pdiv = 1;
+		b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
+	} else {
+		pdiv = 2;
+		b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
+	}
+
+	tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
+	tmp = (tmp - 1) & 0xFF;
+	b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
+
+	tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
+	tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
+	b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
+
+	ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
+	ref &= 0xFFFF;
+	for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
+		if (ref < freqdata_tab[i].freq) {
+			fd = &freqdata_tab[i];
+			break;
+		}
+	}
+	if (!fd)
+		fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1];
+	b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n",
+	       fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */
+
+	b43_radio_write(dev, B2062_S_RFPLL_CTL8,
+			((u16)(fd->data[1]) << 4) | fd->data[0]);
+	b43_radio_write(dev, B2062_S_RFPLL_CTL9,
+			((u16)(fd->data[3]) << 4) | fd->data[2]);
+	b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]);
+	b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]);
+}
+
+/* Initialize the 2063 radio. */
+static void lpphy_2063_init(struct b43_wldev *dev)
+{
+	//TODO
+}
+
+static void lpphy_sync_stx(struct b43_wldev *dev)
+{
+	//TODO
+}
+
+static void lpphy_radio_init(struct b43_wldev *dev)
+{
+	/* The radio is attached through the 4wire bus. */
+	b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2);
+	udelay(1);
+	b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
+	udelay(1);
+
+	if (dev->phy.rev < 2) {
+		lpphy_2062_init(dev);
+	} else {
+		lpphy_2063_init(dev);
+		lpphy_sync_stx(dev);
+		b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
+		b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
+		//TODO Do something on the backplane
+	}
+}
+
 static int b43_lpphy_op_init(struct b43_wldev *dev)
 {
+	/* TODO: band SPROM */
+	lpphy_baseband_init(dev);
+	lpphy_radio_init(dev);
+
 	//TODO
 
 	return 0;
@@ -115,7 +329,9 @@
 
 static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
 {
-	return 1; /* Default to channel 1 */
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		return 1;
+	return 36;
 }
 
 static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index b0b5357..80703c5 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -4,8 +4,281 @@
 /* Definitions for the LP-PHY */
 
 
+/* The CCK PHY register range. */
+#define B43_LPPHY_B_VERSION			B43_PHY_CCK(0x00) /* B PHY version */
+#define B43_LPPHY_B_BBCONFIG			B43_PHY_CCK(0x01) /* B PHY BBConfig */
+#define B43_LPPHY_B_RX_STAT0			B43_PHY_CCK(0x04) /* B PHY RX Status0 */
+#define B43_LPPHY_B_RX_STAT1			B43_PHY_CCK(0x05) /* B PHY RX Status1 */
+#define B43_LPPHY_B_CRS_THRESH			B43_PHY_CCK(0x06) /* B PHY CRS Thresh */
+#define B43_LPPHY_B_TXERROR			B43_PHY_CCK(0x07) /* B PHY TxError */
+#define B43_LPPHY_B_CHANNEL			B43_PHY_CCK(0x08) /* B PHY Channel */
+#define B43_LPPHY_B_WORKAROUND			B43_PHY_CCK(0x09) /* B PHY workaround */
+#define B43_LPPHY_B_TEST			B43_PHY_CCK(0x0A) /* B PHY Test */
+#define B43_LPPHY_B_FOURWIRE_ADDR		B43_PHY_CCK(0x0B) /* B PHY Fourwire Address */
+#define B43_LPPHY_B_FOURWIRE_DATA_HI		B43_PHY_CCK(0x0C) /* B PHY Fourwire Data Hi */
+#define B43_LPPHY_B_FOURWIRE_DATA_LO		B43_PHY_CCK(0x0D) /* B PHY Fourwire Data Lo */
+#define B43_LPPHY_B_BIST_STAT			B43_PHY_CCK(0x0E) /* B PHY Bist Status */
+#define B43_LPPHY_PA_RAMP_TX_TO			B43_PHY_CCK(0x10) /* PA Ramp TX Timeout */
+#define B43_LPPHY_RF_SYNTH_DC_TIMER		B43_PHY_CCK(0x11) /* RF Synth DC Timer */
+#define B43_LPPHY_PA_RAMP_TX_TIME_IN		B43_PHY_CCK(0x12) /* PA ramp TX Time in */
+#define B43_LPPHY_RX_FILTER_TIME_IN		B43_PHY_CCK(0x13) /* RX Filter Time in */
+#define B43_LPPHY_PLL_COEFF_S			B43_PHY_CCK(0x18) /* PLL Coefficient(s) */
+#define B43_LPPHY_PLL_OUT			B43_PHY_CCK(0x19) /* PLL Out */
+#define B43_LPPHY_RSSI_THRES			B43_PHY_CCK(0x20) /* RSSI Threshold */
+#define B43_LPPHY_IQ_THRES_HH			B43_PHY_CCK(0x21) /* IQ Threshold HH */
+#define B43_LPPHY_IQ_THRES_H			B43_PHY_CCK(0x22) /* IQ Threshold H */
+#define B43_LPPHY_IQ_THRES_L			B43_PHY_CCK(0x23) /* IQ Threshold L */
+#define B43_LPPHY_IQ_THRES_LL			B43_PHY_CCK(0x24) /* IQ Threshold LL */
+#define B43_LPPHY_AGC_GAIN			B43_PHY_CCK(0x25) /* AGC Gain */
+#define B43_LPPHY_LNA_GAIN_RANGE		B43_PHY_CCK(0x26) /* LNA Gain Range */
+#define B43_LPPHY_JSSI				B43_PHY_CCK(0x27) /* JSSI */
+#define B43_LPPHY_TSSI_CTL			B43_PHY_CCK(0x28) /* TSSI Control */
+#define B43_LPPHY_TSSI				B43_PHY_CCK(0x29) /* TSSI */
+#define B43_LPPHY_TR_LOSS			B43_PHY_CCK(0x2A) /* TR Loss */
+#define B43_LPPHY_LO_LEAKAGE			B43_PHY_CCK(0x2B) /* LO Leakage */
+#define B43_LPPHY_LO_RSSIACC			B43_PHY_CCK(0x2C) /* LO RSSIAcc */
+#define B43_LPPHY_LO_IQ_MAG_ACC			B43_PHY_CCK(0x2D) /* LO IQ Mag Acc */
+#define B43_LPPHY_TX_DCOFFSET1			B43_PHY_CCK(0x2E) /* TX DCOffset1 */
+#define B43_LPPHY_TX_DCOFFSET2			B43_PHY_CCK(0x2F) /* TX DCOffset2 */
+#define B43_LPPHY_SYNCPEAKCNT			B43_PHY_CCK(0x30) /* SyncPeakCnt */
+#define B43_LPPHY_SYNCFREQ			B43_PHY_CCK(0x31) /* SyncFreq */
+#define B43_LPPHY_SYNCDIVERSITYCTL		B43_PHY_CCK(0x32) /* SyncDiversityControl */
+#define B43_LPPHY_PEAKENERGYL			B43_PHY_CCK(0x33) /* PeakEnergyL */
+#define B43_LPPHY_PEAKENERGYH			B43_PHY_CCK(0x34) /* PeakEnergyH */
+#define B43_LPPHY_SYNCCTL			B43_PHY_CCK(0x35) /* SyncControl */
+#define B43_LPPHY_DSSSSTEP			B43_PHY_CCK(0x38) /* DsssStep */
+#define B43_LPPHY_DSSSWARMUP			B43_PHY_CCK(0x39) /* DsssWarmup */
+#define B43_LPPHY_DSSSSIGPOW			B43_PHY_CCK(0x3D) /* DsssSigPow */
+#define B43_LPPHY_SFDDETECTBLOCKTIME		B43_PHY_CCK(0x40) /* SfdDetectBlockTIme */
+#define B43_LPPHY_SFDTO				B43_PHY_CCK(0x41) /* SFDTimeOut */
+#define B43_LPPHY_SFDCTL			B43_PHY_CCK(0x42) /* SFDControl */
+#define B43_LPPHY_RXDBG				B43_PHY_CCK(0x43) /* rxDebug */
+#define B43_LPPHY_RX_DELAYCOMP			B43_PHY_CCK(0x44) /* RX DelayComp */
+#define B43_LPPHY_CRSDROPOUTTO			B43_PHY_CCK(0x45) /* CRSDropoutTimeout */
+#define B43_LPPHY_PSEUDOSHORTTO			B43_PHY_CCK(0x46) /* PseudoShortTimeout */
+#define B43_LPPHY_PR3931			B43_PHY_CCK(0x47) /* PR3931 */
+#define B43_LPPHY_DSSSCOEFF1			B43_PHY_CCK(0x48) /* DSSSCoeff1 */
+#define B43_LPPHY_DSSSCOEFF2			B43_PHY_CCK(0x49) /* DSSSCoeff2 */
+#define B43_LPPHY_CCKCOEFF1			B43_PHY_CCK(0x4A) /* CCKCoeff1 */
+#define B43_LPPHY_CCKCOEFF2			B43_PHY_CCK(0x4B) /* CCKCoeff2 */
+#define B43_LPPHY_TRCORR			B43_PHY_CCK(0x4C) /* TRCorr */
+#define B43_LPPHY_ANGLESCALE			B43_PHY_CCK(0x4D) /* AngleScale */
+#define B43_LPPHY_OPTIONALMODES2		B43_PHY_CCK(0x4F) /* OptionalModes2 */
+#define B43_LPPHY_CCKLMSSTEPSIZE		B43_PHY_CCK(0x50) /* CCKLMSStepSize */
+#define B43_LPPHY_DFEBYPASS			B43_PHY_CCK(0x51) /* DFEBypass */
+#define B43_LPPHY_CCKSTARTDELAYLONG		B43_PHY_CCK(0x52) /* CCKStartDelayLong */
+#define B43_LPPHY_CCKSTARTDELAYSHORT		B43_PHY_CCK(0x53) /* CCKStartDelayShort */
+#define B43_LPPHY_PPROCCHDELAY			B43_PHY_CCK(0x54) /* PprocChDelay */
+#define B43_LPPHY_PPROCONOFF			B43_PHY_CCK(0x55) /* PProcOnOff */
+#define B43_LPPHY_LNAGAINTWOBIT10		B43_PHY_CCK(0x5B) /* LNAGainTwoBit10 */
+#define B43_LPPHY_LNAGAINTWOBIT32		B43_PHY_CCK(0x5C) /* LNAGainTwoBit32 */
+#define B43_LPPHY_OPTIONALMODES			B43_PHY_CCK(0x5D) /* OptionalModes */
+#define B43_LPPHY_B_RX_STAT2			B43_PHY_CCK(0x5E) /* B PHY RX Status2 */
+#define B43_LPPHY_B_RX_STAT3			B43_PHY_CCK(0x5F) /* B PHY RX Status3 */
+#define B43_LPPHY_PWDNDACDELAY			B43_PHY_CCK(0x63) /* pwdnDacDelay */
+#define B43_LPPHY_FINEDIGIGAIN_CTL		B43_PHY_CCK(0x67) /* FineDigiGain Control */
+#define B43_LPPHY_LG2GAINTBLLNA8		B43_PHY_CCK(0x68) /* Lg2GainTblLNA8 */
+#define B43_LPPHY_LG2GAINTBLLNA28		B43_PHY_CCK(0x69) /* Lg2GainTblLNA28 */
+#define B43_LPPHY_GAINTBLLNATRSW		B43_PHY_CCK(0x6A) /* GainTblLNATrSw */
+#define B43_LPPHY_PEAKENERGY			B43_PHY_CCK(0x6B) /* PeakEnergy */
+#define B43_LPPHY_LG2INITGAIN			B43_PHY_CCK(0x6C) /* lg2InitGain */
+#define B43_LPPHY_BLANKCOUNTLNAPGA		B43_PHY_CCK(0x6D) /* BlankCountLnaPga */
+#define B43_LPPHY_LNAGAINTWOBIT54		B43_PHY_CCK(0x6E) /* LNAGainTwoBit54 */
+#define B43_LPPHY_LNAGAINTWOBIT76		B43_PHY_CCK(0x6F) /* LNAGainTwoBit76 */
+#define B43_LPPHY_JSSICTL			B43_PHY_CCK(0x70) /* JSSIControl */
+#define B43_LPPHY_LG2GAINTBLLNA44		B43_PHY_CCK(0x71) /* Lg2GainTblLNA44 */
+#define B43_LPPHY_LG2GAINTBLLNA62		B43_PHY_CCK(0x72) /* Lg2GainTblLNA62 */
+
+/* The OFDM PHY register range. */
+#define B43_LPPHY_VERSION			B43_PHY_OFDM(0x00) /* Version */
+#define B43_LPPHY_BBCONFIG			B43_PHY_OFDM(0x01) /* BBConfig */
+#define B43_LPPHY_RX_STAT0			B43_PHY_OFDM(0x04) /* RX Status0 */
+#define B43_LPPHY_RX_STAT1			B43_PHY_OFDM(0x05) /* RX Status1 */
+#define B43_LPPHY_TX_ERROR			B43_PHY_OFDM(0x07) /* TX Error */
+#define B43_LPPHY_CHANNEL			B43_PHY_OFDM(0x08) /* Channel */
+#define B43_LPPHY_WORKAROUND			B43_PHY_OFDM(0x09) /* workaround */
+#define B43_LPPHY_FOURWIRE_ADDR			B43_PHY_OFDM(0x0B) /* Fourwire Address */
+#define B43_LPPHY_FOURWIREDATAHI		B43_PHY_OFDM(0x0C) /* FourwireDataHi */
+#define B43_LPPHY_FOURWIREDATALO		B43_PHY_OFDM(0x0D) /* FourwireDataLo */
+#define B43_LPPHY_BISTSTAT0			B43_PHY_OFDM(0x0E) /* BistStatus0 */
+#define B43_LPPHY_BISTSTAT1			B43_PHY_OFDM(0x0F) /* BistStatus1 */
+#define B43_LPPHY_CRSGAIN_CTL			B43_PHY_OFDM(0x10) /* crsgain Control */
+#define B43_LPPHY_OFDMPWR_THRESH0		B43_PHY_OFDM(0x11) /* ofdmPower Thresh0 */
+#define B43_LPPHY_OFDMPWR_THRESH1		B43_PHY_OFDM(0x12) /* ofdmPower Thresh1 */
+#define B43_LPPHY_OFDMPWR_THRESH2		B43_PHY_OFDM(0x13) /* ofdmPower Thresh2 */
+#define B43_LPPHY_DSSSPWR_THRESH0		B43_PHY_OFDM(0x14) /* dsssPower Thresh0 */
+#define B43_LPPHY_DSSSPWR_THRESH1		B43_PHY_OFDM(0x15) /* dsssPower Thresh1 */
+#define B43_LPPHY_MINPWR_LEVEL			B43_PHY_OFDM(0x16) /* MinPower Level */
+#define B43_LPPHY_OFDMSYNCTHRESH0		B43_PHY_OFDM(0x17) /* ofdmSyncThresh0 */
+#define B43_LPPHY_OFDMSYNCTHRESH1		B43_PHY_OFDM(0x18) /* ofdmSyncThresh1 */
+#define B43_LPPHY_FINEFREQEST			B43_PHY_OFDM(0x19) /* FineFreqEst */
+#define B43_LPPHY_IDLEAFTERPKTRXTO		B43_PHY_OFDM(0x1A) /* IDLEafterPktRXTimeout */
+#define B43_LPPHY_LTRN_CTL			B43_PHY_OFDM(0x1B) /* LTRN Control */
+#define B43_LPPHY_DCOFFSETTRANSIENT		B43_PHY_OFDM(0x1C) /* DCOffsetTransient */
+#define B43_LPPHY_PREAMBLEINTO			B43_PHY_OFDM(0x1D) /* PreambleInTimeout */
+#define B43_LPPHY_PREAMBLECONFIRMTO		B43_PHY_OFDM(0x1E) /* PreambleConfirmTimeout */
+#define B43_LPPHY_CLIPTHRESH			B43_PHY_OFDM(0x1F) /* ClipThresh */
+#define B43_LPPHY_CLIPCTRTHRESH			B43_PHY_OFDM(0x20) /* ClipCtrThresh */
+#define B43_LPPHY_OFDMSYNCTIMER_CTL		B43_PHY_OFDM(0x21) /* ofdmSyncTimer Control */
+#define B43_LPPHY_WAITFORPHYSELTO		B43_PHY_OFDM(0x22) /* WaitforPHYSelTimeout */
+#define B43_LPPHY_HIGAINDB			B43_PHY_OFDM(0x23) /* HiGainDB */
+#define B43_LPPHY_LOWGAINDB			B43_PHY_OFDM(0x24) /* LowGainDB */
+#define B43_LPPHY_VERYLOWGAINDB			B43_PHY_OFDM(0x25) /* VeryLowGainDB */
+#define B43_LPPHY_GAINMISMATCH			B43_PHY_OFDM(0x26) /* gainMismatch */
+#define B43_LPPHY_GAINDIRECTMISMATCH		B43_PHY_OFDM(0x27) /* gaindirectMismatch */
+#define B43_LPPHY_PWR_THRESH0			B43_PHY_OFDM(0x28) /* Power Thresh0 */
+#define B43_LPPHY_PWR_THRESH1			B43_PHY_OFDM(0x29) /* Power Thresh1 */
+#define B43_LPPHY_DETECTOR_DELAY_ADJUST		B43_PHY_OFDM(0x2A) /* Detector Delay Adjust */
+#define B43_LPPHY_REDUCED_DETECTOR_DELAY	B43_PHY_OFDM(0x2B) /* Reduced Detector Delay */
+#define B43_LPPHY_DATA_TO			B43_PHY_OFDM(0x2C) /* data Timeout */
+#define B43_LPPHY_CORRELATOR_DIS_DELAY		B43_PHY_OFDM(0x2D) /* correlator Dis Delay */
+#define B43_LPPHY_DIVERSITY_GAINBACK		B43_PHY_OFDM(0x2E) /* Diversity GainBack */
+#define B43_LPPHY_DSSS_CONFIRM_CNT		B43_PHY_OFDM(0x2F) /* DSSS Confirm Cnt */
+#define B43_LPPHY_DC_BLANK_INT			B43_PHY_OFDM(0x30) /* DC Blank Interval */
+#define B43_LPPHY_GAIN_MISMATCH_LIMIT		B43_PHY_OFDM(0x31) /* gain Mismatch Limit */
+#define B43_LPPHY_CRS_ED_THRESH			B43_PHY_OFDM(0x32) /* crs ed thresh */
+#define B43_LPPHY_PHASE_SHIFT_CTL		B43_PHY_OFDM(0x33) /* phase shift Control */
+#define B43_LPPHY_INPUT_PWRDB			B43_PHY_OFDM(0x34) /* Input PowerDB */
+#define B43_LPPHY_OFDM_SYNC_CTL			B43_PHY_OFDM(0x35) /* ofdm sync Control */
+#define B43_LPPHY_AFE_ADC_CTL_0			B43_PHY_OFDM(0x36) /* Afe ADC Control 0 */
+#define B43_LPPHY_AFE_ADC_CTL_1			B43_PHY_OFDM(0x37) /* Afe ADC Control 1 */
+#define B43_LPPHY_AFE_ADC_CTL_2			B43_PHY_OFDM(0x38) /* Afe ADC Control 2 */
+#define B43_LPPHY_AFE_DAC_CTL			B43_PHY_OFDM(0x39) /* Afe DAC Control */
+#define B43_LPPHY_AFE_CTL			B43_PHY_OFDM(0x3A) /* Afe Control */
+#define B43_LPPHY_AFE_CTL_OVR			B43_PHY_OFDM(0x3B) /* Afe Control Ovr */
+#define B43_LPPHY_AFE_CTL_OVRVAL		B43_PHY_OFDM(0x3C) /* Afe Control OvrVal */
+#define B43_LPPHY_AFE_RSSI_CTL_0		B43_PHY_OFDM(0x3D) /* Afe RSSI Control 0 */
+#define B43_LPPHY_AFE_RSSI_CTL_1		B43_PHY_OFDM(0x3E) /* Afe RSSI Control 1 */
+#define B43_LPPHY_AFE_RSSI_SEL			B43_PHY_OFDM(0x3F) /* Afe RSSI Sel */
+#define B43_LPPHY_RADAR_THRESH			B43_PHY_OFDM(0x40) /* Radar Thresh */
+#define B43_LPPHY_RADAR_BLANK_INT		B43_PHY_OFDM(0x41) /* Radar blank Interval */
+#define B43_LPPHY_RADAR_MIN_FM_INT		B43_PHY_OFDM(0x42) /* Radar min fm Interval */
+#define B43_LPPHY_RADAR_GAIN_TO			B43_PHY_OFDM(0x43) /* Radar gain timeout */
+#define B43_LPPHY_RADAR_PULSE_TO		B43_PHY_OFDM(0x44) /* Radar pulse timeout */
+#define B43_LPPHY_RADAR_DETECT_FM_CTL		B43_PHY_OFDM(0x45) /* Radar detect FM Control */
+#define B43_LPPHY_RADAR_DETECT_EN		B43_PHY_OFDM(0x46) /* Radar detect En */
+#define B43_LPPHY_RADAR_RD_DATA_REG		B43_PHY_OFDM(0x47) /* Radar Rd Data Reg */
+#define B43_LPPHY_LP_PHY_CTL			B43_PHY_OFDM(0x48) /* LP PHY Control */
+#define B43_LPPHY_CLASSIFIER_CTL		B43_PHY_OFDM(0x49) /* classifier Control */
+#define B43_LPPHY_RESET_CTL			B43_PHY_OFDM(0x4A) /* reset Control */
+#define B43_LPPHY_CLKEN_CTL			B43_PHY_OFDM(0x4B) /* ClkEn Control */
+#define B43_LPPHY_RF_OVERRIDE_0			B43_PHY_OFDM(0x4C) /* RF Override 0 */
+#define B43_LPPHY_RF_OVERRIDE_VAL_0		B43_PHY_OFDM(0x4D) /* RF Override Val 0 */
+#define B43_LPPHY_TR_LOOKUP_1			B43_PHY_OFDM(0x4E) /* TR Lookup 1 */
+#define B43_LPPHY_TR_LOOKUP_2			B43_PHY_OFDM(0x4F) /* TR Lookup 2 */
+#define B43_LPPHY_RSSISELLOOKUP1		B43_PHY_OFDM(0x50) /* RssiSelLookup1 */
+#define B43_LPPHY_IQLO_CAL_CMD			B43_PHY_OFDM(0x51) /* iqlo Cal Cmd */
+#define B43_LPPHY_IQLO_CAL_CMD_N_NUM		B43_PHY_OFDM(0x52) /* iqlo Cal Cmd N num */
+#define B43_LPPHY_IQLO_CAL_CMD_G_CTL		B43_PHY_OFDM(0x53) /* iqlo Cal Cmd G control */
+#define B43_LPPHY_MACINT_DBG_REGISTER		B43_PHY_OFDM(0x54) /* macint Debug Register */
+#define B43_LPPHY_TABLE_ADDR			B43_PHY_OFDM(0x55) /* Table Address */
+#define B43_LPPHY_TABLEDATALO			B43_PHY_OFDM(0x56) /* TabledataLo */
+#define B43_LPPHY_TABLEDATAHI			B43_PHY_OFDM(0x57) /* TabledataHi */
+#define B43_LPPHY_PHY_CRS_ENABLE_ADDR		B43_PHY_OFDM(0x58) /* phy CRS Enable Address */
+#define B43_LPPHY_IDLETIME_CTL			B43_PHY_OFDM(0x59) /* Idletime Control */
+#define B43_LPPHY_IDLETIME_CRS_ON_LO		B43_PHY_OFDM(0x5A) /* Idletime CRS On Lo */
+#define B43_LPPHY_IDLETIME_CRS_ON_HI		B43_PHY_OFDM(0x5B) /* Idletime CRS On Hi */
+#define B43_LPPHY_IDLETIME_MEAS_TIME_LO		B43_PHY_OFDM(0x5C) /* Idletime Meas Time Lo */
+#define B43_LPPHY_IDLETIME_MEAS_TIME_HI		B43_PHY_OFDM(0x5D) /* Idletime Meas Time Hi */
+#define B43_LPPHY_RESET_LEN_OFDM_TX_ADDR	B43_PHY_OFDM(0x5E) /* Reset len Ofdm TX Address */
+#define B43_LPPHY_RESET_LEN_OFDM_RX_ADDR	B43_PHY_OFDM(0x5F) /* Reset len Ofdm RX Address */
+#define B43_LPPHY_REG_CRS_ENABLE		B43_PHY_OFDM(0x60) /* reg crs enable */
+#define B43_LPPHY_PLCP_TMT_STR0_CTR_MIN		B43_PHY_OFDM(0x61) /* PLCP Tmt Str0 Ctr Min */
+#define B43_LPPHY_PKT_FSM_RESET_LEN_VAL		B43_PHY_OFDM(0x62) /* Pkt fsm Reset Len Value */
+#define B43_LPPHY_READSYM2RESET_CTL		B43_PHY_OFDM(0x63) /* readsym2reset Control */
+#define B43_LPPHY_DC_FILTER_DELAY1		B43_PHY_OFDM(0x64) /* Dc filter delay1 */
+#define B43_LPPHY_PACKET_RX_ACTIVE_TO		B43_PHY_OFDM(0x65) /* packet rx Active timeout */
+#define B43_LPPHY_ED_TOVAL			B43_PHY_OFDM(0x66) /* ed timeoutValue */
+#define B43_LPPHY_HOLD_CRS_ON_VAL		B43_PHY_OFDM(0x67) /* hold CRS On Value */
+#define B43_LPPHY_OFDM_TX_PHY_CRS_DELAY_VAL	B43_PHY_OFDM(0x69) /* ofdm tx phy CRS Delay Value */
+#define B43_LPPHY_CCK_TX_PHY_CRS_DELAY_VAL	B43_PHY_OFDM(0x6A) /* cck tx phy CRS Delay Value */
+#define B43_LPPHY_ED_ON_CONFIRM_TIMER_VAL	B43_PHY_OFDM(0x6B) /* Ed on confirm Timer Value */
+#define B43_LPPHY_ED_OFFSET_CONFIRM_TIMER_VAL	B43_PHY_OFDM(0x6C) /* Ed offset confirm Timer Value */
+#define B43_LPPHY_PHY_CRS_OFFSET_TIMER_VAL	B43_PHY_OFDM(0x6D) /* phy CRS offset Timer Value */
+#define B43_LPPHY_ADC_COMPENSATION_CTL		B43_PHY_OFDM(0x70) /* ADC Compensation Control */
+#define B43_LPPHY_LOG2_RBPSK_ADDR		B43_PHY_OFDM(0x71) /* log2 RBPSK Address */
+#define B43_LPPHY_LOG2_RQPSK_ADDR		B43_PHY_OFDM(0x72) /* log2 RQPSK Address */
+#define B43_LPPHY_LOG2_R16QAM_ADDR		B43_PHY_OFDM(0x73) /* log2 R16QAM Address */
+#define B43_LPPHY_LOG2_R64QAM_ADDR		B43_PHY_OFDM(0x74) /* log2 R64QAM Address */
+#define B43_LPPHY_OFFSET_BPSK_ADDR		B43_PHY_OFDM(0x75) /* offset BPSK Address */
+#define B43_LPPHY_OFFSET_QPSK_ADDR		B43_PHY_OFDM(0x76) /* offset QPSK Address */
+#define B43_LPPHY_OFFSET_16QAM_ADDR		B43_PHY_OFDM(0x77) /* offset 16QAM Address */
+#define B43_LPPHY_OFFSET_64QAM_ADDR		B43_PHY_OFDM(0x78) /* offset 64QAM Address */
+#define B43_LPPHY_ALPHA1			B43_PHY_OFDM(0x79) /* Alpha1 */
+#define B43_LPPHY_ALPHA2			B43_PHY_OFDM(0x7A) /* Alpha2 */
+#define B43_LPPHY_BETA1				B43_PHY_OFDM(0x7B) /* Beta1 */
+#define B43_LPPHY_BETA2				B43_PHY_OFDM(0x7C) /* Beta2 */
+#define B43_LPPHY_LOOP_NUM_ADDR			B43_PHY_OFDM(0x7D) /* Loop Num Address */
+#define B43_LPPHY_STR_COLLMAX_SMPL_ADDR		B43_PHY_OFDM(0x7E) /* Str Collmax Sample Address */
+#define B43_LPPHY_MAX_SMPL_COARSE_FINE_ADDR	B43_PHY_OFDM(0x7F) /* Max Sample Coarse/Fine Address */
+#define B43_LPPHY_MAX_SMPL_COARSE_STR0CTR_ADDR	B43_PHY_OFDM(0x80) /* Max Sample Coarse/Str0Ctr Address */
+#define B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR	B43_PHY_OFDM(0x81) /* IQ Enable Wait Time Address */
+#define B43_LPPHY_IQ_NUM_SMPLS_ADDR		B43_PHY_OFDM(0x82) /* IQ Num Samples Address */
+#define B43_LPPHY_IQ_ACC_HI_ADDR		B43_PHY_OFDM(0x83) /* IQ Acc Hi Address */
+#define B43_LPPHY_IQ_ACC_LO_ADDR		B43_PHY_OFDM(0x84) /* IQ Acc Lo Address */
+#define B43_LPPHY_IQ_I_PWR_ACC_HI_ADDR		B43_PHY_OFDM(0x85) /* IQ I PWR Acc Hi Address */
+#define B43_LPPHY_IQ_I_PWR_ACC_LO_ADDR		B43_PHY_OFDM(0x86) /* IQ I PWR Acc Lo Address */
+#define B43_LPPHY_IQ_Q_PWR_ACC_HI_ADDR		B43_PHY_OFDM(0x87) /* IQ Q PWR Acc Hi Address */
+#define B43_LPPHY_IQ_Q_PWR_ACC_LO_ADDR		B43_PHY_OFDM(0x88) /* IQ Q PWR Acc Lo Address */
+#define B43_LPPHY_MAXNUMSTEPS			B43_PHY_OFDM(0x89) /* MaxNumsteps */
+#define B43_LPPHY_ROTORPHASE_ADDR		B43_PHY_OFDM(0x8A) /* RotorPhase Address */
+#define B43_LPPHY_ADVANCEDRETARDROTOR_ADDR	B43_PHY_OFDM(0x8B) /* AdvancedRetardRotor Address */
+#define B43_LPPHY_RSSIADCDELAY_CTL_ADDR		B43_PHY_OFDM(0x8D) /* rssiAdcdelay Control Address */
+#define B43_LPPHY_TSSISTAT_ADDR			B43_PHY_OFDM(0x8E) /* tssiStatus Address */
+#define B43_LPPHY_TEMPSENSESTAT_ADDR		B43_PHY_OFDM(0x8F) /* tempsenseStatus Address */
+#define B43_LPPHY_TEMPSENSE_CTL_ADDR		B43_PHY_OFDM(0x90) /* tempsense Control Address */
+#define B43_LPPHY_WRSSISTAT_ADDR		B43_PHY_OFDM(0x91) /* wrssistatus Address */
+#define B43_LPPHY_MUFACTORADDR			B43_PHY_OFDM(0x92) /* mufactoraddr */
+#define B43_LPPHY_SCRAMSTATE_ADDR		B43_PHY_OFDM(0x93) /* scramstate Address */
+#define B43_LPPHY_TXHOLDOFFADDR			B43_PHY_OFDM(0x94) /* txholdoffaddr */
+#define B43_LPPHY_PKTGAINVAL_ADDR		B43_PHY_OFDM(0x95) /* pktgainval Address */
+#define B43_LPPHY_COARSEESTIM_ADDR		B43_PHY_OFDM(0x96) /* Coarseestim Address */
+#define B43_LPPHY_STATE_TRANSITION_ADDR		B43_PHY_OFDM(0x97) /* state Transition Address */
+#define B43_LPPHY_TRN_OFFSET_ADDR		B43_PHY_OFDM(0x98) /* TRN offset Address */
+#define B43_LPPHY_NUM_ROTOR_ADDR		B43_PHY_OFDM(0x99) /* Num Rotor Address */
+#define B43_LPPHY_VITERBI_OFFSET_ADDR		B43_PHY_OFDM(0x9A) /* Viterbi Offset Address */
+#define B43_LPPHY_SMPL_COLLECT_WAIT_ADDR	B43_PHY_OFDM(0x9B) /* Sample collect wait Address */
+#define B43_LPPHY_A_PHY_CTL_ADDR		B43_PHY_OFDM(0x9C) /* A PHY Control Address */
+#define B43_LPPHY_NUM_PASS_THROUGH_ADDR		B43_PHY_OFDM(0x9D) /* Num Pass Through Address */
+#define B43_LPPHY_RX_COMP_COEFF_S		B43_PHY_OFDM(0x9E) /* RX Comp coefficient(s) */
+#define B43_LPPHY_CPAROTATEVAL			B43_PHY_OFDM(0x9F) /* cpaRotateValue */
+#define B43_LPPHY_SMPL_PLAY_COUNT		B43_PHY_OFDM(0xA0) /* Sample play count */
+#define B43_LPPHY_SMPL_PLAY_BUFFER_CTL		B43_PHY_OFDM(0xA1) /* Sample play Buffer Control */
+#define B43_LPPHY_FOURWIRE_CTL			B43_PHY_OFDM(0xA2) /* fourwire Control */
+#define B43_LPPHY_CPA_TAILCOUNT_VAL		B43_PHY_OFDM(0xA3) /* CPA TailCount Value */
+#define B43_LPPHY_TX_PWR_CTL_CMD		B43_PHY_OFDM(0xA4) /* TX Power Control Cmd */
+#define B43_LPPHY_TX_PWR_CTL_NNUM		B43_PHY_OFDM(0xA5) /* TX Power Control Nnum */
+#define B43_LPPHY_TX_PWR_CTL_IDLETSSI		B43_PHY_OFDM(0xA6) /* TX Power Control IdleTssi */
+#define B43_LPPHY_TX_PWR_CTL_TARGETPWR		B43_PHY_OFDM(0xA7) /* TX Power Control TargetPower */
+#define B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT	B43_PHY_OFDM(0xA8) /* TX Power Control DeltaPower Limit */
+#define B43_LPPHY_TX_PWR_CTL_BASEINDEX		B43_PHY_OFDM(0xA9) /* TX Power Control BaseIndex */
+#define B43_LPPHY_TX_PWR_CTL_PWR_INDEX		B43_PHY_OFDM(0xAA) /* TX Power Control Power Index */
+#define B43_LPPHY_TX_PWR_CTL_STAT		B43_PHY_OFDM(0xAB) /* TX Power Control Status */
+#define B43_LPPHY_LP_RF_SIGNAL_LUT		B43_PHY_OFDM(0xAC) /* LP RF signal LUT */
+#define B43_LPPHY_RX_RADIO_CTL_FILTER_STATE	B43_PHY_OFDM(0xAD) /* RX Radio Control Filter State */
+#define B43_LPPHY_RX_RADIO_CTL			B43_PHY_OFDM(0xAE) /* RX Radio Control */
+#define B43_LPPHY_NRSSI_STAT_ADDR		B43_PHY_OFDM(0xAF) /* NRSSI status Address */
+#define B43_LPPHY_RF_OVERRIDE_2			B43_PHY_OFDM(0xB0) /* RF override 2 */
+#define B43_LPPHY_RF_OVERRIDE_2_VAL		B43_PHY_OFDM(0xB1) /* RF override 2 val */
+#define B43_LPPHY_PS_CTL_OVERRIDE_VAL0		B43_PHY_OFDM(0xB2) /* PS Control override val0 */
+#define B43_LPPHY_PS_CTL_OVERRIDE_VAL1		B43_PHY_OFDM(0xB3) /* PS Control override val1 */
+#define B43_LPPHY_PS_CTL_OVERRIDE_VAL2		B43_PHY_OFDM(0xB4) /* PS Control override val2 */
+#define B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL	B43_PHY_OFDM(0xB5) /* TX gain Control override val */
+#define B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL	B43_PHY_OFDM(0xB6) /* RX gain Control override val */
+#define B43_LPPHY_AFE_DDFS			B43_PHY_OFDM(0xB7) /* AFE DDFS */
+#define B43_LPPHY_AFE_DDFS_POINTER_INIT		B43_PHY_OFDM(0xB8) /* AFE DDFS pointer init */
+#define B43_LPPHY_AFE_DDFS_INCR_INIT		B43_PHY_OFDM(0xB9) /* AFE DDFS incr init */
+#define B43_LPPHY_MRCNOISEREDUCTION		B43_PHY_OFDM(0xBA) /* mrcNoiseReduction */
+#define B43_LPPHY_TRLOOKUP3			B43_PHY_OFDM(0xBB) /* TRLookup3 */
+#define B43_LPPHY_TRLOOKUP4			B43_PHY_OFDM(0xBC) /* TRLookup4 */
+#define B43_LPPHY_RADAR_FIFO_STAT		B43_PHY_OFDM(0xBD) /* Radar FIFO Status */
+#define B43_LPPHY_GPIO_OUTEN			B43_PHY_OFDM(0xBE) /* GPIO Out enable */
+#define B43_LPPHY_GPIO_SELECT			B43_PHY_OFDM(0xBF) /* GPIO Select */
+#define B43_LPPHY_GPIO_OUT			B43_PHY_OFDM(0xC0) /* GPIO Out */
 
 
+
+/* Radio register access decorators. */
 #define B43_LP_RADIO(radio_reg)			(radio_reg)
 #define B43_LP_NORTH(radio_reg)			B43_LP_RADIO(radio_reg)
 #define B43_LP_SOUTH(radio_reg)			B43_LP_RADIO((radio_reg) | 0x4000)
@@ -530,7 +803,47 @@
 
 
 struct b43_phy_lp {
-	//TODO
+	/* Transmit isolation medium band */
+	u8 tx_isolation_med_band; /* FIXME initial value? */
+	/* Transmit isolation low band */
+	u8 tx_isolation_low_band; /* FIXME initial value? */
+	/* Transmit isolation high band */
+	u8 tx_isolation_hi_band; /* FIXME initial value? */
+
+	/* Receive power offset */
+	u8 rx_pwr_offset; /* FIXME initial value? */
+
+	/* TSSI transmit count */
+	u16 tssi_tx_count; /* FIXME initial value? */
+	/* TSSI index */
+	u16 tssi_idx; /* FIXME initial value? */
+	/* TSSI npt */
+	u16 tssi_npt; /* FIXME initial value? */
+
+	/* Target TX frequency */
+	u16 tgt_tx_freq; /* FIXME initial value? */
+
+	/* Transmit power index override */
+	s8 tx_pwr_idx_over; /* FIXME initial value? */
+
+	/* RSSI vf */
+	u8 rssi_vf; /* FIXME initial value? */
+	/* RSSI vc */
+	u8 rssi_vc; /* FIXME initial value? */
+	/* RSSI gs */
+	u8 rssi_gs; /* FIXME initial value? */
+
+	/* RC cap */
+	u8 rc_cap; /* FIXME initial value? */
+	/* BX arch */
+	u8 bx_arch; /* FIXME initial value? */
+
+	/* Full calibration channel */
+	u8 full_calib_chan; /* FIXME initial value? */
+
+	/* Transmit iqlocal best coeffs */
+	bool tx_iqloc_best_coeffs_valid;
+	u8 tx_iqloc_best_coeffs[11];
 };
 
 
diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c
new file mode 100644
index 0000000..18f6e32
--- /dev/null
+++ b/drivers/net/wireless/b43/tables_lpphy.c
@@ -0,0 +1,333 @@
+/*
+
+  Broadcom B43 wireless driver
+  IEEE 802.11g LP-PHY and radio device data tables
+
+  Copyright (c) 2009 Michael Buesch <mb@bu3sch.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include "b43.h"
+#include "tables_lpphy.h"
+#include "phy_common.h"
+#include "phy_lp.h"
+
+
+/* Entry of the 2062 radio init table */
+struct b2062_init_tab_entry {
+	u16 offset;
+	u16 value_a;
+	u16 value_g;
+	u8 flags;
+};
+#define B2062_FLAG_A	0x01 /* Flag: Init in A mode */
+#define B2062_FLAG_G	0x02 /* Flag: Init in G mode */
+
+static const struct b2062_init_tab_entry b2062_init_tab[] = {
+	/* { .offset = B2062_N_COMM1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = 0x0001, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_COMM5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM10, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM12, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM13, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM14, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_COMM15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_PDN_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_PDN_CTL1, .value_a = 0x0000, .value_g = 0x00CA, .flags = B2062_FLAG_G, },
+	/* { .offset = B2062_N_PDN_CTL2, .value_a = 0x0018, .value_g = 0x0018, .flags = 0, }, */
+	{ .offset = B2062_N_PDN_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_N_PDN_CTL4, .value_a = 0x0015, .value_g = 0x002A, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_GEN_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_IQ_CALIB, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+	{ .offset = B2062_N_LGENC, .value_a = 0x00DB, .value_g = 0x00FF, .flags = B2062_FLAG_A, },
+	/* { .offset = B2062_N_LGENA_LPF, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_BIAS0, .value_a = 0x0041, .value_g = 0x0041, .flags = 0, }, */
+	/* { .offset = B2062_N_LGNEA_BIAS1, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_CTL0, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_LGENA_TUNE0, .value_a = 0x00DD, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_LGENA_TUNE1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_LGENA_TUNE2, .value_a = 0x00DD, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_N_LGENA_TUNE3, .value_a = 0x0077, .value_g = 0x00B5, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_N_LGENA_CTL3, .value_a = 0x0000, .value_g = 0x00FF, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_LGENA_CTL4, .value_a = 0x001F, .value_g = 0x001F, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_CTL5, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
+	/* { .offset = B2062_N_LGENA_CTL6, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
+	{ .offset = B2062_N_LGENA_CTL7, .value_a = 0x0033, .value_g = 0x0033, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_RXA_CTL0, .value_a = 0x0009, .value_g = 0x0009, .flags = 0, }, */
+	{ .offset = B2062_N_RXA_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_G, },
+	/* { .offset = B2062_N_RXA_CTL2, .value_a = 0x0018, .value_g = 0x0018, .flags = 0, }, */
+	/* { .offset = B2062_N_RXA_CTL3, .value_a = 0x0027, .value_g = 0x0027, .flags = 0, }, */
+	/* { .offset = B2062_N_RXA_CTL4, .value_a = 0x0028, .value_g = 0x0028, .flags = 0, }, */
+	/* { .offset = B2062_N_RXA_CTL5, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
+	/* { .offset = B2062_N_RXA_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_RXA_CTL7, .value_a = 0x0008, .value_g = 0x0008, .flags = 0, }, */
+	{ .offset = B2062_N_RXBB_CTL0, .value_a = 0x0082, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_RXBB_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_GAIN0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_RXBB_GAIN1, .value_a = 0x0004, .value_g = 0x0004, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_N_RXBB_GAIN2, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_RXBB_GAIN3, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI0, .value_a = 0x0043, .value_g = 0x0043, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI1, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_CALIB0, .value_a = 0x0010, .value_g = 0x0010, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_CALIB1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_CALIB2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS0, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS1, .value_a = 0x002A, .value_g = 0x002A, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS2, .value_a = 0x00AA, .value_g = 0x00AA, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS3, .value_a = 0x0021, .value_g = 0x0021, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS4, .value_a = 0x00AA, .value_g = 0x00AA, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_BIAS5, .value_a = 0x0022, .value_g = 0x0022, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI2, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI3, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI4, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+	/* { .offset = B2062_N_RXBB_RSSI5, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL0, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL2, .value_a = 0x0084, .value_g = 0x0084, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_N_TX_CTL4, .value_a = 0x0003, .value_g = 0x0003, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_N_TX_CTL5, .value_a = 0x0002, .value_g = 0x0002, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_TX_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL7, .value_a = 0x0058, .value_g = 0x0058, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL8, .value_a = 0x0082, .value_g = 0x0082, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_CTL_A, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_GC2G, .value_a = 0x00FF, .value_g = 0x00FF, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_GC5G, .value_a = 0x00FF, .value_g = 0x00FF, .flags = 0, }, */
+	{ .offset = B2062_N_TX_TUNE, .value_a = 0x0088, .value_g = 0x001B, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_N_TX_PAD, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_PGA, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_PADAUX, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+	/* { .offset = B2062_N_TX_PGAAUX, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+	/* { .offset = B2062_N_TSSI_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TSSI_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TSSI_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_IQ_CALIB_CTL0, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+	/* { .offset = B2062_N_IQ_CALIB_CTL1, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_N_IQ_CALIB_CTL2, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_TS, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_CTL1, .value_a = 0x0015, .value_g = 0x0015, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_CTL2, .value_a = 0x000F, .value_g = 0x000F, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_CTL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_DBG0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_DBG1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_DBG2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_CALIB_DBG3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_PSENSE_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_PSENSE_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_PSENSE_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_N_TEST_BUF0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RADIO_ID_CODE, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_COMM5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM10, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM12, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM13, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM14, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_COMM15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_PDS_CTL0, .value_a = 0x00FF, .value_g = 0x00FF, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_PDS_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_PDS_CTL2, .value_a = 0x008E, .value_g = 0x008E, .flags = 0, }, */
+	/* { .offset = B2062_S_PDS_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_BG_CTL0, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
+	/* { .offset = B2062_S_BG_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_BG_CTL2, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
+	{ .offset = B2062_S_LGENG_CTL0, .value_a = 0x00F8, .value_g = 0x00D8, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_LGENG_CTL1, .value_a = 0x003C, .value_g = 0x0024, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_LGENG_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_LGENG_CTL3, .value_a = 0x0041, .value_g = 0x0041, .flags = 0, }, */
+	/* { .offset = B2062_S_LGENG_CTL4, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
+	/* { .offset = B2062_S_LGENG_CTL5, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+	/* { .offset = B2062_S_LGENG_CTL6, .value_a = 0x0022, .value_g = 0x0022, .flags = 0, }, */
+	/* { .offset = B2062_S_LGENG_CTL7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_LGENG_CTL8, .value_a = 0x0088, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_LGENG_CTL9, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+	{ .offset = B2062_S_LGENG_CTL10, .value_a = 0x0088, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_LGENG_CTL11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL1, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL2, .value_a = 0x00AF, .value_g = 0x00AF, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL3, .value_a = 0x0012, .value_g = 0x0012, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL4, .value_a = 0x000B, .value_g = 0x000B, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL5, .value_a = 0x005F, .value_g = 0x005F, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL7, .value_a = 0x0040, .value_g = 0x0040, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL8, .value_a = 0x0052, .value_g = 0x0052, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL9, .value_a = 0x0026, .value_g = 0x0026, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL10, .value_a = 0x0003, .value_g = 0x0003, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL11, .value_a = 0x0036, .value_g = 0x0036, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL12, .value_a = 0x0057, .value_g = 0x0057, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL13, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL14, .value_a = 0x0075, .value_g = 0x0075, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL15, .value_a = 0x00B4, .value_g = 0x00B4, .flags = 0, }, */
+	/* { .offset = B2062_S_REFPLL_CTL16, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL0, .value_a = 0x0098, .value_g = 0x0098, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL1, .value_a = 0x0010, .value_g = 0x0010, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RFPLL_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL5, .value_a = 0x0043, .value_g = 0x0043, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL6, .value_a = 0x0047, .value_g = 0x0047, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL7, .value_a = 0x000C, .value_g = 0x000C, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL8, .value_a = 0x0011, .value_g = 0x0011, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL9, .value_a = 0x0011, .value_g = 0x0011, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL10, .value_a = 0x000E, .value_g = 0x000E, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL11, .value_a = 0x0008, .value_g = 0x0008, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL12, .value_a = 0x0033, .value_g = 0x0033, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL13, .value_a = 0x000A, .value_g = 0x000A, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL14, .value_a = 0x0006, .value_g = 0x0006, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RFPLL_CTL15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL16, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL17, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL18, .value_a = 0x003E, .value_g = 0x003E, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL19, .value_a = 0x0013, .value_g = 0x0013, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RFPLL_CTL20, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL21, .value_a = 0x0062, .value_g = 0x0062, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL22, .value_a = 0x0007, .value_g = 0x0007, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL23, .value_a = 0x0016, .value_g = 0x0016, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL24, .value_a = 0x005C, .value_g = 0x005C, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL25, .value_a = 0x0095, .value_g = 0x0095, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RFPLL_CTL26, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL27, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL28, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RFPLL_CTL29, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL30, .value_a = 0x00A0, .value_g = 0x00A0, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL31, .value_a = 0x0004, .value_g = 0x0004, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RFPLL_CTL32, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	{ .offset = B2062_S_RFPLL_CTL33, .value_a = 0x00CC, .value_g = 0x00CC, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	{ .offset = B2062_S_RFPLL_CTL34, .value_a = 0x0007, .value_g = 0x0007, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+	/* { .offset = B2062_S_RXG_CNT0, .value_a = 0x0010, .value_g = 0x0010, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT5, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT6, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT7, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+	{ .offset = B2062_S_RXG_CNT8, .value_a = 0x000F, .value_g = 0x000F, .flags = B2062_FLAG_A, },
+	/* { .offset = B2062_S_RXG_CNT9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT10, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT11, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT12, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT13, .value_a = 0x0044, .value_g = 0x0044, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT14, .value_a = 0x00A0, .value_g = 0x00A0, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT15, .value_a = 0x0004, .value_g = 0x0004, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT16, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+	/* { .offset = B2062_S_RXG_CNT17, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+};
+
+void b2062_upload_init_table(struct b43_wldev *dev)
+{
+	const struct b2062_init_tab_entry *e;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(b2062_init_tab); i++) {
+		e = &b2062_init_tab[i];
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			if (!(e->flags & B2062_FLAG_G))
+				continue;
+			b43_radio_write(dev, e->offset, e->value_g);
+		} else {
+			if (!(e->flags & B2062_FLAG_A))
+				continue;
+			b43_radio_write(dev, e->offset, e->value_a);
+		}
+	}
+}
+
+u32 b43_lptab_read(struct b43_wldev *dev, u32 offset)
+{
+	u32 type, value;
+
+	type = offset & B43_LPTAB_TYPEMASK;
+	offset &= ~B43_LPTAB_TYPEMASK;
+	B43_WARN_ON(offset > 0xFFFF);
+
+	switch (type) {
+	case B43_LPTAB_8BIT:
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_LPPHY_TABLEDATALO) & 0xFF;
+		break;
+	case B43_LPTAB_16BIT:
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
+		break;
+	case B43_LPTAB_32BIT:
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_LPPHY_TABLEDATAHI);
+		value <<= 16;
+		value |= b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
+		break;
+	default:
+		B43_WARN_ON(1);
+		value = 0;
+	}
+
+	return value;
+}
+
+void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value)
+{
+	u32 type;
+
+	type = offset & B43_LPTAB_TYPEMASK;
+	offset &= ~B43_LPTAB_TYPEMASK;
+	B43_WARN_ON(offset > 0xFFFF);
+
+	switch (type) {
+	case B43_LPTAB_8BIT:
+		B43_WARN_ON(value & ~0xFF);
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+		break;
+	case B43_LPTAB_16BIT:
+		B43_WARN_ON(value & ~0xFFFF);
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+		break;
+	case B43_LPTAB_32BIT:
+		b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+		b43_phy_write(dev, B43_LPPHY_TABLEDATAHI, value >> 16);
+		b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+		break;
+	default:
+		B43_WARN_ON(1);
+	}
+}
diff --git a/drivers/net/wireless/b43/tables_lpphy.h b/drivers/net/wireless/b43/tables_lpphy.h
new file mode 100644
index 0000000..03ea2ff
--- /dev/null
+++ b/drivers/net/wireless/b43/tables_lpphy.h
@@ -0,0 +1,23 @@
+#ifndef B43_TABLES_LPPHY_H_
+#define B43_TABLES_LPPHY_H_
+
+
+#define B43_LPTAB_TYPEMASK		0xF0000000
+#define B43_LPTAB_8BIT			0x10000000
+#define B43_LPTAB_16BIT			0x20000000
+#define B43_LPTAB_32BIT			0x30000000
+#define B43_LPTAB8(table, offset)	(((table) << 10) | (offset) | B43_LPTAB_8BIT)
+#define B43_LPTAB16(table, offset)	(((table) << 10) | (offset) | B43_LPTAB_16BIT)
+#define B43_LPTAB32(table, offset)	(((table) << 10) | (offset) | B43_LPTAB_32BIT)
+
+/* Table definitions */
+#define B43_LPTAB_TXPWR_R2PLUS		B43_LPTAB32(0x07, 0) /* TX power lookup table (rev >= 2) */
+#define B43_LPTAB_TXPWR_R0_1		B43_LPTAB32(0xA0, 0) /* TX power lookup table (rev < 2) */
+
+u32 b43_lptab_read(struct b43_wldev *dev, u32 offset);
+void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value);
+
+void b2062_upload_init_table(struct b43_wldev *dev);
+
+
+#endif /* B43_TABLES_LPPHY_H_ */
diff --git a/drivers/net/wireless/b43legacy/leds.c b/drivers/net/wireless/b43legacy/leds.c
index cacb786..3ea55b1 100644
--- a/drivers/net/wireless/b43legacy/leds.c
+++ b/drivers/net/wireless/b43legacy/leds.c
@@ -146,12 +146,12 @@
 	case B43legacy_LED_TRANSFER:
 	case B43legacy_LED_APTRANSFER:
 		snprintf(name, sizeof(name),
-			 "b43legacy-%s:tx", wiphy_name(hw->wiphy));
+			 "b43legacy-%s::tx", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_tx, name,
 				 ieee80211_get_tx_led_name(hw),
 				 led_index, activelow);
 		snprintf(name, sizeof(name),
-			 "b43legacy-%s:rx", wiphy_name(hw->wiphy));
+			 "b43legacy-%s::rx", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_rx, name,
 				 ieee80211_get_rx_led_name(hw),
 				 led_index, activelow);
@@ -161,7 +161,7 @@
 	case B43legacy_LED_RADIO_B:
 	case B43legacy_LED_MODE_BG:
 		snprintf(name, sizeof(name),
-			 "b43legacy-%s:radio", wiphy_name(hw->wiphy));
+			 "b43legacy-%s::radio", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_radio, name,
 				 b43legacy_rfkill_led_name(dev),
 				 led_index, activelow);
@@ -172,7 +172,7 @@
 	case B43legacy_LED_WEIRD:
 	case B43legacy_LED_ASSOC:
 		snprintf(name, sizeof(name),
-			 "b43legacy-%s:assoc", wiphy_name(hw->wiphy));
+			 "b43legacy-%s::assoc", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_assoc, name,
 				 ieee80211_get_assoc_led_name(hw),
 				 led_index, activelow);
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 19b1bf0..2417563 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -193,7 +193,7 @@
 	if (prism_header)
 		skb_pull(skb, phdrlen);
 	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = __constant_htons(ETH_P_802_2);
+	skb->protocol = cpu_to_be16(ETH_P_802_2);
 	memset(skb->cb, 0, sizeof(skb->cb));
 	netif_rx(skb);
 
@@ -1094,7 +1094,7 @@
 	if (skb2 != NULL) {
 		/* send to wireless media */
 		skb2->dev = dev;
-		skb2->protocol = __constant_htons(ETH_P_802_3);
+		skb2->protocol = cpu_to_be16(ETH_P_802_3);
 		skb_reset_mac_header(skb2);
 		skb_reset_network_header(skb2);
 		/* skb2->network_header += ETH_HLEN; */
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 0903db7..0a4bf94 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -609,7 +609,7 @@
 	skb->dev = ap->local->apdev;
 	skb_pull(skb, hostap_80211_get_hdrlen(fc));
 	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = __constant_htons(ETH_P_802_2);
+	skb->protocol = cpu_to_be16(ETH_P_802_2);
 	memset(skb->cb, 0, sizeof(skb->cb));
 	netif_rx(skb);
 }
@@ -2281,7 +2281,7 @@
 	    WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_BEACON)
 		goto drop;
 
-	skb->protocol = __constant_htons(ETH_P_HOSTAP);
+	skb->protocol = cpu_to_be16(ETH_P_HOSTAP);
 	handle_ap_item(local, skb, rx_stats);
 	return;
 
@@ -2310,7 +2310,7 @@
 	hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, 16);
 
 	/* Generate a fake pspoll frame to start packet delivery */
-	hdr->frame_ctl = __constant_cpu_to_le16(
+	hdr->frame_ctl = cpu_to_le16(
 		IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
 	memcpy(hdr->addr1, local->dev->dev_addr, ETH_ALEN);
 	memcpy(hdr->addr2, sta->addr, ETH_ALEN);
@@ -2754,7 +2754,7 @@
 	if (meta->flags & HOSTAP_TX_FLAGS_ADD_MOREDATA) {
 		/* indicate to STA that more frames follow */
 		hdr->frame_ctl |=
-			__constant_cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+			cpu_to_le16(IEEE80211_FCTL_MOREDATA);
 	}
 
 	if (meta->flags & HOSTAP_TX_FLAGS_BUFFERED_FRAME) {
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index c40fdf4..8618b33 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1638,7 +1638,7 @@
 	memset(&scan_req, 0, sizeof(scan_req));
 	scan_req.channel_list = cpu_to_le16(local->channel_mask &
 					    local->scan_channel_mask);
-	scan_req.txrate = __constant_cpu_to_le16(HFA384X_RATES_1MBPS);
+	scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS);
 	if (ssid) {
 		if (ssid_len > 32)
 			return -EINVAL;
@@ -1668,7 +1668,7 @@
 	memset(&scan_req, 0, sizeof(scan_req));
 	scan_req.channel_list = cpu_to_le16(local->channel_mask &
 					    local->scan_channel_mask);
-	scan_req.txrate = __constant_cpu_to_le16(HFA384X_RATES_1MBPS);
+	scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS);
 
 	/* FIX:
 	 * It seems to be enough to set roaming mode for a short moment to
@@ -2514,7 +2514,7 @@
 		u16 rate;
 
 		memset(&scan_req, 0, sizeof(scan_req));
-		scan_req.channel_list = __constant_cpu_to_le16(0x3fff);
+		scan_req.channel_list = cpu_to_le16(0x3fff);
 		switch (value) {
 		case 1: rate = HFA384X_RATES_1MBPS; break;
 		case 2: rate = HFA384X_RATES_2MBPS; break;
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 3d5cc44..1d5dc3e 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -150,6 +150,7 @@
 
 config LIBIPW
 	tristate
+	depends on PCI && WLAN_80211
 	select WIRELESS_EXT
 	select CRYPTO
 	select CRYPTO_ARC4
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 625f2cf..0420d3d 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -8272,7 +8272,7 @@
 		skb_reset_mac_header(skb);
 
 		skb->pkt_type = PACKET_OTHERHOST;
-		skb->protocol = __constant_htons(ETH_P_80211_STATS);
+		skb->protocol = cpu_to_be16(ETH_P_80211_STATS);
 		memset(skb->cb, 0, sizeof(rxb->skb->cb));
 		netif_rx(skb);
 		rxb->skb = NULL;
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index fec2fbf..ddc8b31 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -8,7 +8,7 @@
 iwlcore-$(CONFIG_IWLAGN_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
 
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
-iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-hcmd-check.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o
 
 iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
 iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-100.c b/drivers/net/wireless/iwlwifi/iwl-100.c
index dbadaf4..11d206a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-100.c
+++ b/drivers/net/wireless/iwlwifi/iwl-100.c
@@ -46,7 +46,7 @@
 #include "iwl-5000-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL100_UCODE_API_MAX 1
+#define IWL100_UCODE_API_MAX 2
 
 /* Lowest firmware API version supported */
 #define IWL100_UCODE_API_MIN 1
@@ -66,5 +66,8 @@
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_A,
+	.valid_rx_ant = ANT_AB,
+	.need_pll_cfg = true,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index fab1373..a973ac1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -137,7 +137,7 @@
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	IWL_DEBUG_LED("led off %d\n", led_id);
+	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
 	return iwl_send_led_cmd(priv, &led_cmd);
 }
 
@@ -174,7 +174,7 @@
 	case LED_FULL:
 		if (led->type == IWL_LED_TRG_ASSOC) {
 			priv->allow_blinking = 1;
-			IWL_DEBUG_LED("MAC is  associated\n");
+			IWL_DEBUG_LED(priv, "MAC is  associated\n");
 		}
 		if (led->led_on)
 			led->led_on(priv, IWL_LED_LINK);
@@ -182,7 +182,7 @@
 	case LED_OFF:
 		if (led->type == IWL_LED_TRG_ASSOC) {
 			priv->allow_blinking = 0;
-			IWL_DEBUG_LED("MAC is disassociated\n");
+			IWL_DEBUG_LED(priv, "MAC is disassociated\n");
 		}
 		if (led->led_off)
 			led->led_off(priv, IWL_LED_LINK);
@@ -316,7 +316,7 @@
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
 	snprintf(priv->led39[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led39[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
+		 sizeof(priv->led39[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led39[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on;
@@ -332,7 +332,7 @@
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
 	snprintf(priv->led39[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led39[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
+		 sizeof(priv->led39[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
@@ -349,7 +349,7 @@
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
 	snprintf(priv->led39[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led39[IWL_LED_TRG_RX].name), "iwl-%s:RX",
+		 sizeof(priv->led39[IWL_LED_TRG_RX].name), "iwl-%s::RX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
@@ -365,7 +365,7 @@
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
 	snprintf(priv->led39[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led39[IWL_LED_TRG_TX].name), "iwl-%s:TX",
+		 sizeof(priv->led39[IWL_LED_TRG_TX].name), "iwl-%s::TX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 044abf7..7db8198 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -183,7 +183,7 @@
 	int unflushed = 0;
 	int i;
 	unsigned long flags;
-	struct iwl_priv *priv = rs_sta->priv;
+	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
 	/*
 	 * For each rate, if we have collected data on that rate
@@ -197,7 +197,7 @@
 		spin_lock_irqsave(&rs_sta->lock, flags);
 		if (time_after(jiffies, rs_sta->win[i].stamp +
 			       IWL_RATE_WIN_FLUSH)) {
-			IWL_DEBUG_RATE("flushing %d samples of rate "
+			IWL_DEBUG_RATE(priv, "flushing %d samples of rate "
 				       "index %d\n",
 				       rs_sta->win[i].counter, i);
 			iwl3945_clear_window(&rs_sta->win[i]);
@@ -216,12 +216,12 @@
 static void iwl3945_bg_rate_scale_flush(unsigned long data)
 {
 	struct iwl3945_rs_sta *rs_sta = (void *)data;
-	struct iwl_priv *priv = rs_sta->priv;
+	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 	int unflushed = 0;
 	unsigned long flags;
 	u32 packet_count, duration, pps;
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	unflushed = iwl3945_rate_scale_flush_windows(rs_sta);
 
@@ -236,7 +236,7 @@
 		duration =
 		    jiffies_to_msecs(jiffies - rs_sta->last_partial_flush);
 
-		IWL_DEBUG_RATE("Tx'd %d packets in %dms\n",
+		IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n",
 			       packet_count, duration);
 
 		/* Determine packets per second */
@@ -256,7 +256,7 @@
 
 		rs_sta->flush_time = msecs_to_jiffies(duration);
 
-		IWL_DEBUG_RATE("new flush period: %d msec ave %d\n",
+		IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n",
 			       duration, packet_count);
 
 		mod_timer(&rs_sta->rate_scale_flush, jiffies +
@@ -274,7 +274,7 @@
 
 	spin_unlock_irqrestore(&rs_sta->lock, flags);
 
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
 /**
@@ -290,10 +290,10 @@
 {
 	unsigned long flags;
 	s32 fail_count;
-	struct iwl_priv *priv = rs_sta->priv;
+	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
 	if (!retries) {
-		IWL_DEBUG_RATE("leave: retries == 0 -- should be at least 1\n");
+		IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n");
 		return;
 	}
 
@@ -347,7 +347,7 @@
 	struct iwl_priv *priv = (struct iwl_priv *)priv_r;
 	int i;
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	/* TODO: what is a good starting rate for STA? About middle? Maybe not
 	 * the lowest or the highest rate.. Could consider using RSSI from
@@ -370,7 +370,7 @@
 	}
 
 
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
@@ -396,11 +396,11 @@
 	 *	as well just put all the information there.
 	 */
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp);
 	if (!rs_sta) {
-		IWL_DEBUG_RATE("leave: ENOMEM\n");
+		IWL_DEBUG_RATE(priv, "leave: ENOMEM\n");
 		return NULL;
 	}
 
@@ -428,7 +428,7 @@
 	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
 		iwl3945_clear_window(&rs_sta->win[i]);
 
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 
 	return rs_sta;
 }
@@ -438,14 +438,14 @@
 {
 	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
 	struct iwl3945_rs_sta *rs_sta = priv_sta;
-	struct iwl_priv *priv = rs_sta->priv;
+	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
 	psta->rs_sta = NULL;
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 	del_timer_sync(&rs_sta->rate_scale_flush);
 	kfree(rs_sta);
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
 
@@ -466,18 +466,18 @@
 	struct iwl3945_rs_sta *rs_sta = priv_sta;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	retries = info->status.rates[0].count;
 
 	first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
 	if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) {
-		IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index);
+		IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index);
 		return;
 	}
 
 	if (!priv_sta) {
-		IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
+		IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
 		return;
 	}
 
@@ -511,7 +511,7 @@
 		iwl3945_collect_tx_data(rs_sta,
 				    &rs_sta->win[scale_rate_index],
 				    0, current_count, scale_rate_index);
-		IWL_DEBUG_RATE("Update rate %d for %d retries.\n",
+		IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n",
 			       scale_rate_index, current_count);
 
 		retries -= current_count;
@@ -521,7 +521,7 @@
 
 
 	/* Update the last index window with success/failure based on ACK */
-	IWL_DEBUG_RATE("Update rate %d with %s.\n",
+	IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n",
 		       last_index,
 		       (info->flags & IEEE80211_TX_STAT_ACK) ?
 		       "success" : "failure");
@@ -546,7 +546,7 @@
 
 	spin_unlock_irqrestore(&rs_sta->lock, flags);
 
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 
 	return;
 }
@@ -556,7 +556,7 @@
 {
 	u8 high = IWL_RATE_INVALID;
 	u8 low = IWL_RATE_INVALID;
-	struct iwl_priv *priv = rs_sta->priv;
+	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
 	/* 802.11A walks to the next literal adjacent rate in
 	 * the rate table */
@@ -596,7 +596,7 @@
 			break;
 		if (rate_mask & (1 << low))
 			break;
-		IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
+		IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
 	}
 
 	high = index;
@@ -609,7 +609,7 @@
 			break;
 		if (rate_mask & (1 << high))
 			break;
-		IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
+		IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
 	}
 
 	return (high << 8) | low;
@@ -655,7 +655,7 @@
 	struct iwl_priv *priv = (struct iwl_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	if (sta)
 		rate_mask = sta->supp_rates[sband->band];
@@ -666,7 +666,7 @@
 	if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
 	    is_multicast_ether_addr(hdr->addr1) ||
 	    !sta || !priv_sta) {
-		IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
+		IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
 		if (!rate_mask)
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, NULL);
@@ -693,7 +693,7 @@
 		u8 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE("LQ: ADD station %pm\n",
+			IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
 				       hdr->addr1);
 			sta_id = iwl3945_add_station(priv,
 				    hdr->addr1, 0, CMD_ASYNC);
@@ -728,7 +728,7 @@
 	     (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) {
 		spin_unlock_irqrestore(&rs_sta->lock, flags);
 
-		IWL_DEBUG_RATE("Invalid average_tpt on rate %d: "
+		IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: "
 			       "counter: %d, success_counter: %d, "
 			       "expected_tpt is %sNULL\n",
 			       index,
@@ -761,7 +761,7 @@
 	scale_action = 1;
 
 	if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) {
-		IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
+		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
 		scale_action = -1;
 	} else if ((low_tpt == IWL_INVALID_VALUE) &&
 		   (high_tpt == IWL_INVALID_VALUE))
@@ -769,7 +769,7 @@
 	else if ((low_tpt != IWL_INVALID_VALUE) &&
 		 (high_tpt != IWL_INVALID_VALUE) &&
 		 (low_tpt < current_tpt) && (high_tpt < current_tpt)) {
-		IWL_DEBUG_RATE("No action -- low [%d] & high [%d] < "
+		IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < "
 			       "current_tpt [%d]\n",
 			       low_tpt, high_tpt, current_tpt);
 		scale_action = 0;
@@ -778,14 +778,14 @@
 			if (high_tpt > current_tpt)
 				scale_action = 1;
 			else {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of high tpt\n");
+				IWL_DEBUG_RATE(priv,
+				    "decrease rate because of high tpt\n");
 				scale_action = -1;
 			}
 		} else if (low_tpt != IWL_INVALID_VALUE) {
 			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of low tpt\n");
+				IWL_DEBUG_RATE(priv,
+				    "decrease rate because of low tpt\n");
 				scale_action = -1;
 			} else
 				scale_action = 1;
@@ -797,7 +797,7 @@
 			scale_action = 0;
 	} else if (scale_action == 1) {
 		if (window->success_ratio < IWL_SUCCESS_UP_TH) {
-			IWL_DEBUG_RATE("No action -- success_ratio [%d] < "
+			IWL_DEBUG_RATE(priv, "No action -- success_ratio [%d] < "
 			       "SUCCESS UP\n", window->success_ratio);
 			scale_action = 0;
 		}
@@ -820,7 +820,7 @@
 		break;
 	}
 
-	IWL_DEBUG_RATE("Selected %d (action %d) - low %d high %d\n",
+	IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n",
 		       index, scale_action, low, high);
 
  out:
@@ -832,7 +832,7 @@
 	else
 		info->control.rates[0].idx = rs_sta->last_txrate_idx;
 
-	IWL_DEBUG_RATE("leave: %d\n", index);
+	IWL_DEBUG_RATE(priv, "leave: %d\n", index);
 }
 
 #ifdef CONFIG_MAC80211_DEBUGFS
@@ -915,7 +915,7 @@
 	struct ieee80211_sta *sta;
 	struct iwl3945_sta_priv *psta;
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 
 	rcu_read_lock();
 
@@ -934,7 +934,7 @@
 	switch (priv->band) {
 	case IEEE80211_BAND_2GHZ:
 		/* TODO: this always does G, not a regression */
-		if (priv->active39_rxon.flags & RXON_FLG_TGG_PROTECT_MSK) {
+		if (priv->active_rxon.flags & RXON_FLG_TGG_PROTECT_MSK) {
 			rs_sta->tgg = 1;
 			rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot;
 		} else
@@ -955,11 +955,11 @@
 	if (rssi == 0)
 		rssi = IWL_MIN_RSSI_VAL;
 
-	IWL_DEBUG(IWL_DL_INFO | IWL_DL_RATE, "Network RSSI: %d\n", rssi);
+	IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi);
 
 	rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band);
 
-	IWL_DEBUG_RATE("leave: rssi %d assign rate index: "
+	IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: "
 		       "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate,
 		       iwl3945_rates[rs_sta->start_rate].plcp);
 	rcu_read_unlock();
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 12f93b6..cb6db45 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -170,7 +170,7 @@
 	iwl_release_nic_access(priv);
 
 	if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
-		IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
+		IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
 			       disable_ptr);
 		ret = iwl_grab_nic_access(priv);
 		for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
@@ -180,9 +180,9 @@
 
 		iwl_release_nic_access(priv);
 	} else {
-		IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
-		IWL_DEBUG_INFO("  by writing \"1\"s into disable bitmap\n");
-		IWL_DEBUG_INFO("  in SRAM at 0x%x, size %d u32s\n",
+		IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
+		IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
+		IWL_DEBUG_INFO(priv, "  in SRAM at 0x%x, size %d u32s\n",
 			       disable_ptr, array_size);
 	}
 
@@ -251,7 +251,7 @@
 		break;
 	case IEEE80211_BAND_2GHZ:
 		if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
-		    iwl3945_is_associated(priv)) {
+		    iwl_is_associated(priv)) {
 			if (rate == IWL_RATE_11M_INDEX)
 				next_rate = IWL_RATE_5M_INDEX;
 		}
@@ -338,11 +338,11 @@
 	info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
 				IEEE80211_TX_STAT_ACK : 0;
 
-	IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
+	IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
 			txq_id, iwl3945_get_tx_fail_reason(status), status,
 			tx_resp->rate, tx_resp->failure_frame);
 
-	IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
+	IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
 	iwl3945_tx_queue_reclaim(priv, txq_id, index);
 
 	if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
@@ -362,7 +362,7 @@
 void iwl3945_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
 	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
-	IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
+	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(struct iwl3945_notif_statistics),
 		     le32_to_cpu(pkt->len));
 
@@ -496,13 +496,13 @@
 		 * MAC addresses show just the last byte (for brevity),
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
-			IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
 				     "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, rate);
 		else {
 			/* src/dst addresses assume managed mode */
-			IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, "
 				     "src=0x%02x, rssi=%u, tim=%lu usec, "
 				     "phy=0x%02x, chnl=%d\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
@@ -563,14 +563,14 @@
 
 	/* We received data from the HW, so stop the watchdog */
 	if (unlikely((len + IWL39_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
-		IWL_DEBUG_DROP("Corruption detected!\n");
+		IWL_DEBUG_DROP(priv, "Corruption detected!\n");
 		return;
 	}
 
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT
-		    ("Dropping packet while interface is not open.\n");
+		IWL_DEBUG_DROP_LIMIT(priv,
+			"Dropping packet while interface is not open.\n");
 		return;
 	}
 
@@ -579,7 +579,8 @@
 	skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
 
 	if (!iwl3945_mod_params.sw_crypto)
-		iwl3945_set_decrypted_flag(priv, rxb->skb,
+		iwl_set_decrypted_flag(priv,
+				       (struct ieee80211_hdr *)rxb->skb->data,
 				       le32_to_cpu(rx_end->status), stats);
 
 #ifdef CONFIG_IWL3945_LEDS
@@ -625,15 +626,14 @@
 		rx_status.flag |= RX_FLAG_SHORTPRE;
 
 	if ((unlikely(rx_stats->phy_count > 20))) {
-		IWL_DEBUG_DROP
-		    ("dsp size out of range [0,20]: "
-		     "%d/n", rx_stats->phy_count);
+		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
+				rx_stats->phy_count);
 		return;
 	}
 
 	if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
 	    || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
+		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
 		return;
 	}
 
@@ -672,7 +672,7 @@
 	}
 
 
-	IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
+	IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
 			rx_status.signal, rx_status.noise, rx_status.qual,
 			rx_stats_sig_avg, rx_stats_noise_diff);
 
@@ -680,7 +680,7 @@
 
 	network_packet = iwl3945_is_network_packet(priv, header);
 
-	IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
+	IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
 			      network_packet ? '*' : ' ',
 			      le16_to_cpu(rx_hdr->channel),
 			      rx_status.signal, rx_status.signal,
@@ -798,7 +798,7 @@
 			goto out;
 		}
 
-	IWL_DEBUG_INFO("can not find STA %pM (total %d)\n",
+	IWL_DEBUG_INFO(priv, "can not find STA %pM (total %d)\n",
 		       addr, priv->num_stations);
  out:
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
@@ -873,7 +873,7 @@
 	/* CCK */
 	tx->supp_rates[1] = (rate_mask & 0xF);
 
-	IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
+	IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 		       "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
 		       tx->rate, le32_to_cpu(tx->tx_flags),
 		       tx->supp_rates[1], tx->supp_rates[0]);
@@ -898,7 +898,7 @@
 
 	iwl_send_add_sta(priv,
 			 (struct iwl_addsta_cmd *)&station->sta, flags);
-	IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
+	IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
 			sta_id, tx_rate);
 	return sta_id;
 }
@@ -1063,7 +1063,7 @@
 {
 	int ret = 0;
 
-	iwl3945_power_init_handle(priv);
+	iwl_power_initialize(priv);
 
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
@@ -1079,7 +1079,7 @@
 	iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			    CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (ret < 0) {
-		IWL_DEBUG_INFO("Failed to init the card\n");
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
 		goto out;
 	}
 
@@ -1111,31 +1111,31 @@
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
-		IWL_DEBUG_INFO("RTP type \n");
+		IWL_DEBUG_INFO(priv, "RTP type \n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
-		IWL_DEBUG_INFO("3945 RADIO-MB type\n");
+		IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
 	} else {
-		IWL_DEBUG_INFO("3945 RADIO-MM type\n");
+		IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
 	}
 
 	if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
-		IWL_DEBUG_INFO("SKU OP mode is mrc\n");
+		IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
 	} else
-		IWL_DEBUG_INFO("SKU OP mode is basic\n");
+		IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
 
 	if ((eeprom->board_revision & 0xF0) == 0xD0) {
-		IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
+		IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
 			       eeprom->board_revision);
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
 	} else {
-		IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
+		IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
 			       eeprom->board_revision);
 		iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
 			      CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
@@ -1144,10 +1144,10 @@
 	if (eeprom->almgor_m_version <= 1) {
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
-		IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
+		IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
 			       eeprom->almgor_m_version);
 	} else {
-		IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
+		IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
 			       eeprom->almgor_m_version);
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
@@ -1155,10 +1155,10 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
-		IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
+		IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
 
 	if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
-		IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
+		IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
 }
 
 int iwl3945_hw_nic_init(struct iwl_priv *priv)
@@ -1176,7 +1176,7 @@
 	rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
 	if (rc)
 		return rc;
-	IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
+	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 
 	rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
 	if(rc)
@@ -1285,7 +1285,7 @@
 
 out:
 	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO("stop master\n");
+	IWL_DEBUG_INFO(priv, "stop master\n");
 
 	return ret;
 }
@@ -1390,7 +1390,7 @@
 
 	/* driver's okay range is -260 to +25.
 	 *   human readable okay range is 0 to +285 */
-	IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
+	IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
 
 	/* handle insane temp reading */
 	if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
@@ -1427,20 +1427,20 @@
 
 	/* get absolute value */
 	if (temp_diff < 0) {
-		IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
 		temp_diff = -temp_diff;
 	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER("Same temp,\n");
+		IWL_DEBUG_POWER(priv, "Same temp,\n");
 	else
-		IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
 
 	/* if we don't need calibration, *don't* update last_temperature */
 	if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
-		IWL_DEBUG_POWER("Timed thermal calib not needed\n");
+		IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
 		return 0;
 	}
 
-	IWL_DEBUG_POWER("Timed thermal calib needed\n");
+	IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
 
 	/* assume that caller will actually do calib ...
 	 *   update the "last temperature" value */
@@ -1689,27 +1689,27 @@
  * Configures power settings for all rates for the current channel,
  * using values from channel info struct, and send to NIC
  */
-int iwl3945_send_tx_power(struct iwl_priv *priv)
+static int iwl3945_send_tx_power(struct iwl_priv *priv)
 {
 	int rate_idx, i;
 	const struct iwl_channel_info *ch_info = NULL;
 	struct iwl3945_txpowertable_cmd txpower = {
-		.channel = priv->active39_rxon.channel,
+		.channel = priv->active_rxon.channel,
 	};
 
 	txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
 	ch_info = iwl_get_channel_info(priv,
 				       priv->band,
-				       le16_to_cpu(priv->active39_rxon.channel));
+				       le16_to_cpu(priv->active_rxon.channel));
 	if (!ch_info) {
 		IWL_ERR(priv,
 			"Failed to get channel info for channel %d [%d]\n",
-			le16_to_cpu(priv->active39_rxon.channel), priv->band);
+			le16_to_cpu(priv->active_rxon.channel), priv->band);
 		return -EINVAL;
 	}
 
 	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
+		IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
 				"non-Tx channel.\n");
 		return 0;
 	}
@@ -1722,7 +1722,7 @@
 		txpower.power[i].tpc = ch_info->power_info[i].tpc;
 		txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
 
-		IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+		IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
 				le16_to_cpu(txpower.channel),
 				txpower.band,
 				txpower.power[i].tpc.tx_gain,
@@ -1735,7 +1735,7 @@
 		txpower.power[i].tpc = ch_info->power_info[i].tpc;
 		txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
 
-		IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+		IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
 				le16_to_cpu(txpower.channel),
 				txpower.band,
 				txpower.power[i].tpc.tx_gain,
@@ -1926,12 +1926,12 @@
 	u8 i;
 
 	if (priv->tx_power_user_lmt == power) {
-		IWL_DEBUG_POWER("Requested Tx power same as current "
+		IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
 				"limit: %ddBm.\n", power);
 		return 0;
 	}
 
-	IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power);
+	IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
 	priv->tx_power_user_lmt = power;
 
 	/* set up new Tx powers for each and every channel, 2.4 and 5.x */
@@ -2041,7 +2041,7 @@
 	} else
 		group_index = 0;	/* 2.4 GHz, group 0 */
 
-	IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
+	IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
 			group_index);
 	return group_index;
 }
@@ -2108,7 +2108,7 @@
 	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
 	const struct iwl3945_eeprom_txpower_group *group;
 
-	IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
+	IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
 
 	for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
 		s8 *clip_pwrs;	/* table of power levels for each rate */
@@ -2224,7 +2224,7 @@
 				eeprom->groups[ch_info->group_index].
 				temperature);
 
-		IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
+		IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
 				ch_info->channel, delta_index, temperature +
 				IWL_TEMP_CONVERT);
 
@@ -2372,7 +2372,9 @@
 {
 	switch (cmd_id) {
 	case REPLY_RXON:
-		return (u16) sizeof(struct iwl3945_rxon_cmd);
+		return sizeof(struct iwl3945_rxon_cmd);
+	case POWER_TABLE_CMD:
+		return sizeof(struct iwl3945_powertable_cmd);
 	default:
 		return len;
 	}
@@ -2409,7 +2411,7 @@
 
 	switch (priv->band) {
 	case IEEE80211_BAND_5GHZ:
-		IWL_DEBUG_RATE("Select A mode rate scale\n");
+		IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
 		/* If one of the following CCK rates is used,
 		 * have it fall back to the 6M OFDM rate */
 		for (i = IWL_RATE_1M_INDEX_TABLE;
@@ -2427,12 +2429,12 @@
 		break;
 
 	case IEEE80211_BAND_2GHZ:
-		IWL_DEBUG_RATE("Select B/G mode rate scale\n");
+		IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
 		/* If an OFDM rate is used, have it fall back to the
 		 * 1M CCK rates */
 
 		if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
-		    iwl3945_is_associated(priv)) {
+		    iwl_is_associated(priv)) {
 
 			index = IWL_FIRST_CCK_RATE;
 			for (i = IWL_RATE_6M_INDEX_TABLE;
@@ -2552,7 +2554,7 @@
 	u32 reg;
 	u32 val;
 
-	IWL_DEBUG_INFO("Begin verify bsm\n");
+	IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
 
 	/* verify BSM SRAM contents */
 	val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
@@ -2570,7 +2572,7 @@
 		}
 	}
 
-	IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
+	IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
 
 	return 0;
 }
@@ -2647,7 +2649,7 @@
 	u32 done;
 	u32 reg_offset;
 
-	IWL_DEBUG_INFO("Begin load bsm\n");
+	IWL_DEBUG_INFO(priv, "Begin load bsm\n");
 
 	/* make sure bootstrap program is no larger than BSM's SRAM size */
 	if (len > IWL39_MAX_BSM_SIZE)
@@ -2704,7 +2706,7 @@
 		udelay(10);
 	}
 	if (i < 100)
-		IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
+		IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
 	else {
 		IWL_ERR(priv, "BSM write did not complete!\n");
 		return -EIO;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index fef54e9..ab7aaf6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -222,9 +222,6 @@
 					 struct iwl_host_cmd *cmd);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
 					struct ieee80211_hdr *hdr,int left);
-extern void iwl3945_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb,
-				   u32 decrypt_res,
-				   struct ieee80211_rx_status *stats);
 
 /*
  * Currently used by iwl-3945-rs... look at restructuring so that it doesn't
@@ -303,11 +300,6 @@
 extern u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id,
 		 u16 tx_rate, u8 flags);
 
-static inline int iwl3945_is_associated(struct iwl_priv *priv)
-{
-	return (priv->active39_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
-}
-
 extern const struct iwl_channel_info *iwl3945_get_channel_info(
 	const struct iwl_priv *priv, enum ieee80211_band band, u16 channel);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index d7d956d..0638f3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -76,7 +76,7 @@
 	u32 reg;
 	u32 val;
 
-	IWL_DEBUG_INFO("Begin verify bsm\n");
+	IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
 
 	/* verify BSM SRAM contents */
 	val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
@@ -94,7 +94,7 @@
 		}
 	}
 
-	IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
+	IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
 
 	return 0;
 }
@@ -144,7 +144,7 @@
 	u32 reg_offset;
 	int ret;
 
-	IWL_DEBUG_INFO("Begin load bsm\n");
+	IWL_DEBUG_INFO(priv, "Begin load bsm\n");
 
 	priv->ucode_type = UCODE_RT;
 
@@ -201,7 +201,7 @@
 		udelay(10);
 	}
 	if (i < 100)
-		IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
+		IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
 	else {
 		IWL_ERR(priv, "BSM write did not complete!\n");
 		return -EIO;
@@ -257,7 +257,7 @@
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
+	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
 	return ret;
 }
@@ -279,7 +279,7 @@
 	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
 		/* We had an error bringing up the hardware, so take it
 		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Initialize Alive failed.\n");
+		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
 		goto restart;
 	}
 
@@ -289,7 +289,7 @@
 	if (iwl_verify_ucode(priv)) {
 		/* Runtime instruction load was bad;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
+		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
 		goto restart;
 	}
 
@@ -299,11 +299,11 @@
 	/* Send pointers to protocol/runtime uCode image ... init code will
 	 * load and launch runtime uCode, which will send us another "Alive"
 	 * notification. */
-	IWL_DEBUG_INFO("Initialization Alive received.\n");
+	IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 	if (iwl4965_set_ucode_ptrs(priv)) {
 		/* Runtime instruction load won't happen;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
+		IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
 		goto restart;
 	}
 	return;
@@ -354,7 +354,7 @@
 	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (ret < 0) {
-		IWL_DEBUG_INFO("Failed to init the card\n");
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
 		goto out;
 	}
 
@@ -437,7 +437,7 @@
 			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO("stop master\n");
+	IWL_DEBUG_INFO(priv, "stop master\n");
 
 	return 0;
 }
@@ -526,7 +526,7 @@
 			IWL_ERR(priv,
 				"Could not send REPLY_PHY_CALIBRATION_CMD\n");
 		data->state = IWL_CHAIN_NOISE_ACCUMULATE;
-		IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
+		IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
 	}
 }
 
@@ -558,7 +558,7 @@
 			data->delta_gain_code[i] = 0;
 		}
 	}
-	IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
+	IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n",
 		     data->delta_gain_code[0],
 		     data->delta_gain_code[1],
 		     data->delta_gain_code[2]);
@@ -576,7 +576,7 @@
 		ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
 				      sizeof(cmd), &cmd);
 		if (ret)
-			IWL_DEBUG_CALIB("fail sending cmd "
+			IWL_DEBUG_CALIB(priv, "fail sending cmd "
 				     "REPLY_PHY_CALIBRATION_CMD \n");
 
 		/* TODO we might want recalculate
@@ -669,7 +669,7 @@
 
 	txq->sched_retry = scd_retry;
 
-	IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
+	IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
 		       active ? "Activate" : "Deactivate",
 		       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 }
@@ -968,7 +968,7 @@
 	ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
 	chan_info->ch_num = (u8) channel;
 
-	IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
+	IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n",
 			  channel, s, ch_i1, ch_i2);
 
 	for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
@@ -998,19 +998,19 @@
 							   m1->pa_det, ch_i2,
 							   m2->pa_det);
 
-			IWL_DEBUG_TXPOWER
-			    ("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
-			     m1->actual_pow, m2->actual_pow, omeas->actual_pow);
-			IWL_DEBUG_TXPOWER
-			    ("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
-			     m1->gain_idx, m2->gain_idx, omeas->gain_idx);
-			IWL_DEBUG_TXPOWER
-			    ("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
-			     m1->pa_det, m2->pa_det, omeas->pa_det);
-			IWL_DEBUG_TXPOWER
-			    ("chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m,
-			     m1->temperature, m2->temperature,
-			     omeas->temperature);
+			IWL_DEBUG_TXPOWER(priv,
+				"chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
+				m1->actual_pow, m2->actual_pow, omeas->actual_pow);
+			IWL_DEBUG_TXPOWER(priv,
+				"chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
+				m1->gain_idx, m2->gain_idx, omeas->gain_idx);
+			IWL_DEBUG_TXPOWER(priv,
+				"chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
+				m1->pa_det, m2->pa_det, omeas->pa_det);
+			IWL_DEBUG_TXPOWER(priv,
+				"chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m,
+				m1->temperature, m2->temperature,
+				omeas->temperature);
 		}
 	}
 
@@ -1312,7 +1312,7 @@
 	user_target_power = 2 * priv->tx_power_user_lmt;
 
 	/* Get current (RXON) channel, band, width */
-	IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
+	IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_fat %d\n", channel, band,
 			  is_fat);
 
 	ch_info = iwl_get_channel_info(priv, priv->band, channel);
@@ -1329,7 +1329,7 @@
 		return -EINVAL;
 	}
 
-	IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
+	IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
 			  channel, txatten_grp);
 
 	if (is_fat) {
@@ -1379,7 +1379,7 @@
 	voltage_compensation =
 	    iwl4965_get_voltage_compensation(voltage, init_voltage);
 
-	IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
+	IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n",
 			  init_voltage,
 			  voltage, voltage_compensation);
 
@@ -1410,13 +1410,13 @@
 		factory_gain_index[c] = measurement->gain_idx;
 		factory_actual_pwr[c] = measurement->actual_pow;
 
-		IWL_DEBUG_TXPOWER("chain = %d\n", c);
-		IWL_DEBUG_TXPOWER("fctry tmp %d, "
+		IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c);
+		IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, "
 				  "curr tmp %d, comp %d steps\n",
 				  factory_temp, current_temp,
 				  temperature_comp[c]);
 
-		IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
+		IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n",
 				  factory_gain_index[c],
 				  factory_actual_pwr[c]);
 	}
@@ -1449,7 +1449,7 @@
 		if (target_power > power_limit)
 			target_power = power_limit;
 
-		IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
+		IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n",
 				  i, saturation_power - back_off_table[i],
 				  current_regulatory, user_target_power,
 				  target_power);
@@ -1473,7 +1473,7 @@
 					    voltage_compensation +
 					    atten_value);
 
-/*			IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
+/*			IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n",
 						power_index); */
 
 			if (power_index < get_min_power_index(i, band))
@@ -1506,7 +1506,7 @@
 			tx_power.s.dsp_predis_atten[c] =
 				gain_table[band][power_index].dsp;
 
-			IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
+			IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d "
 					  "gain 0x%02x dsp %d\n",
 					  c, atten_value, power_index,
 					tx_power.s.radio_tx_gain[c],
@@ -1581,7 +1581,7 @@
 	     rxon2->ofdm_ht_dual_stream_basic_rates) &&
 	    (rxon1->rx_chain == rxon2->rx_chain) &&
 	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
 		return 0;
 	}
 
@@ -1638,7 +1638,7 @@
 	rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
 				      ctrl_chan_high, &cmd.tx_power);
 	if (rc) {
-		IWL_DEBUG_11H("error:%d  fill txpower_tbl\n", rc);
+		IWL_DEBUG_11H(priv, "error:%d  fill txpower_tbl\n", rc);
 		return rc;
 	}
 
@@ -1703,13 +1703,13 @@
 
 	if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
 		(priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
-		IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
+		IWL_DEBUG_TEMP(priv, "Running FAT temperature calibration\n");
 		R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
 		R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
 		R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
 		R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
 	} else {
-		IWL_DEBUG_TEMP("Running temperature calibration\n");
+		IWL_DEBUG_TEMP(priv, "Running temperature calibration\n");
 		R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
 		R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
 		R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
@@ -1729,7 +1729,7 @@
 		vt = sign_extend(
 			le32_to_cpu(priv->statistics.general.temperature), 23);
 
-	IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
+	IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
 
 	if (R3 == R1) {
 		IWL_ERR(priv, "Calibration conflict R1 == R3\n");
@@ -1742,7 +1742,7 @@
 	temperature /= (R3 - R1);
 	temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
 
-	IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n",
+	IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n",
 			temperature, KELVIN_TO_CELSIUS(temperature));
 
 	return temperature;
@@ -1765,7 +1765,7 @@
 	int temp_diff;
 
 	if (!test_bit(STATUS_STATISTICS, &priv->status)) {
-		IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
+		IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n");
 		return 0;
 	}
 
@@ -1773,19 +1773,19 @@
 
 	/* get absolute value */
 	if (temp_diff < 0) {
-		IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d, \n", temp_diff);
 		temp_diff = -temp_diff;
 	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER("Same temp, \n");
+		IWL_DEBUG_POWER(priv, "Same temp, \n");
 	else
-		IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d, \n", temp_diff);
 
 	if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
-		IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
+		IWL_DEBUG_POWER(priv, "Thermal txpower calib not needed\n");
 		return 0;
 	}
 
-	IWL_DEBUG_POWER("Thermal txpower calib needed\n");
+	IWL_DEBUG_POWER(priv, "Thermal txpower calib needed\n");
 
 	return 1;
 }
@@ -1800,12 +1800,12 @@
 
 	if (priv->temperature != temp) {
 		if (priv->temperature)
-			IWL_DEBUG_TEMP("Temperature changed "
+			IWL_DEBUG_TEMP(priv, "Temperature changed "
 				       "from %dC to %dC\n",
 				       KELVIN_TO_CELSIUS(priv->temperature),
 				       KELVIN_TO_CELSIUS(temp));
 		else
-			IWL_DEBUG_TEMP("Temperature "
+			IWL_DEBUG_TEMP(priv, "Temperature "
 				       "initialized to %dC\n",
 				       KELVIN_TO_CELSIUS(temp));
 	}
@@ -1995,8 +1995,8 @@
 	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
 	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
 	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-	addsta->reserved1 = __constant_cpu_to_le16(0);
-	addsta->reserved2 = __constant_cpu_to_le32(0);
+	addsta->reserved1 = cpu_to_le16(0);
+	addsta->reserved2 = cpu_to_le32(0);
 
 	return (u16)sizeof(struct iwl4965_addsta_cmd);
 }
@@ -2022,7 +2022,7 @@
 	int i, sh, idx;
 	u16 seq;
 	if (agg->wait_for_ba)
-		IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
+		IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
 
 	agg->frame_count = tx_resp->frame_count;
 	agg->start_idx = start_idx;
@@ -2036,7 +2036,7 @@
 		idx = start_idx;
 
 		/* FIXME: code repetition */
-		IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
+		IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
 				   agg->frame_count, agg->start_idx, idx);
 
 		info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
@@ -2047,9 +2047,9 @@
 		iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
 		/* FIXME: code repetition end */
 
-		IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
+		IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
 				    status & 0xff, tx_resp->failure_frame);
-		IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
+		IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
 
 		agg->wait_for_ba = 0;
 	} else {
@@ -2069,7 +2069,7 @@
 				      AGG_TX_STATE_ABORT_MSK))
 				continue;
 
-			IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
+			IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
 					   agg->frame_count, txq_id, idx);
 
 			hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
@@ -2083,7 +2083,7 @@
 				return -1;
 			}
 
-			IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
+			IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
 					   i, idx, SEQ_TO_SN(sc));
 
 			sh = idx - start;
@@ -2101,13 +2101,13 @@
 				sh = 0;
 			}
 			bitmap |= 1ULL << sh;
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+			IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
 					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
 		agg->start_idx = start;
-		IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
+		IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
 				   agg->frame_count, agg->start_idx,
 				   (unsigned long long)agg->bitmap);
 
@@ -2176,7 +2176,7 @@
 
 		if (txq->q.read_ptr != (scd_ssn & 0xff)) {
 			index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
-			IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn "
+			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
 					   "%d index %d\n", scd_ssn , index);
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
 			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
@@ -2199,7 +2199,7 @@
 					le32_to_cpu(tx_resp->rate_n_flags),
 					info);
 
-		IWL_DEBUG_TX_REPLY("TXQ %d status %s (0x%08x) "
+		IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) "
 				   "rate_n_flags 0x%x retries %d\n",
 				   txq_id,
 				   iwl_get_tx_fail_reason(status), status,
@@ -2247,7 +2247,7 @@
 		if (valid_antennae & (1 << i))
 			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
 
-	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+	IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
 		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
 		max_rssi, agc);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 89d92a8..e3cba61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -43,6 +43,7 @@
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
+#include "iwl-6000-hw.h"
 
 /* Highest firmware API version supported */
 #define IWL5000_UCODE_API_MAX 1
@@ -84,7 +85,7 @@
 				  CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO("stop master\n");
+	IWL_DEBUG_INFO(priv, "stop master\n");
 
 	return 0;
 }
@@ -108,7 +109,8 @@
 	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 		    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
 
-	iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
+	if (priv->cfg->need_pll_cfg)
+		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 
 	/* set "initialization complete" bit to move adapter
 	 * D0U* --> D0A* state */
@@ -118,7 +120,7 @@
 	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (ret < 0) {
-		IWL_DEBUG_INFO("Failed to init the card\n");
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
 		return ret;
 	}
 
@@ -176,7 +178,8 @@
 
 	/* FIXME: put here L1A -L0S w/a */
 
-	iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
+	if (priv->cfg->need_pll_cfg)
+		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 
 	/* set "initialization complete" bit to move adapter
 	 * D0U* --> D0A* state */
@@ -186,7 +189,7 @@
 	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (ret < 0) {
-		IWL_DEBUG_INFO("Failed to init the card\n");
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
 		goto out;
 	}
 
@@ -338,7 +341,7 @@
 			data->delta_gain_code[i] |= (1 << 2);
 	}
 
-	IWL_DEBUG_CALIB("Delta gains: ANT_B = %d  ANT_C = %d\n",
+	IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d  ANT_C = %d\n",
 			data->delta_gain_code[1], data->delta_gain_code[2]);
 
 	if (!data->radio_write) {
@@ -387,11 +390,11 @@
 			IWL_ERR(priv,
 				"Could not send REPLY_PHY_CALIBRATION_CMD\n");
 		data->state = IWL_CHAIN_NOISE_ACCUMULATE;
-		IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
+		IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
 	}
 }
 
-static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
 			__le32 *tx_flags)
 {
 	if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
@@ -518,7 +521,7 @@
 static void iwl5000_rx_calib_complete(struct iwl_priv *priv,
 			       struct iwl_rx_mem_buffer *rxb)
 {
-	IWL_DEBUG_INFO("Init. calibration is completed, restarting fw.\n");
+	IWL_DEBUG_INFO(priv, "Init. calibration is completed, restarting fw.\n");
 	queue_work(priv->workqueue, &priv->restart);
 }
 
@@ -586,7 +589,7 @@
 	if (ret)
 		return ret;
 
-	IWL_DEBUG_INFO("INST uCode section being loaded...\n");
+	IWL_DEBUG_INFO(priv, "INST uCode section being loaded...\n");
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
 					priv->ucode_write_complete, 5 * HZ);
 	if (ret == -ERESTARTSYS) {
@@ -606,7 +609,7 @@
 	if (ret)
 		return ret;
 
-	IWL_DEBUG_INFO("DATA uCode section being loaded...\n");
+	IWL_DEBUG_INFO(priv, "DATA uCode section being loaded...\n");
 
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
 				priv->ucode_write_complete, 5 * HZ);
@@ -631,20 +634,20 @@
 
 	/* check whether init ucode should be loaded, or rather runtime ucode */
 	if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) {
-		IWL_DEBUG_INFO("Init ucode found. Loading init ucode...\n");
+		IWL_DEBUG_INFO(priv, "Init ucode found. Loading init ucode...\n");
 		ret = iwl5000_load_given_ucode(priv,
 			&priv->ucode_init, &priv->ucode_init_data);
 		if (!ret) {
-			IWL_DEBUG_INFO("Init ucode load complete.\n");
+			IWL_DEBUG_INFO(priv, "Init ucode load complete.\n");
 			priv->ucode_type = UCODE_INIT;
 		}
 	} else {
-		IWL_DEBUG_INFO("Init ucode not found, or already loaded. "
+		IWL_DEBUG_INFO(priv, "Init ucode not found, or already loaded. "
 			"Loading runtime ucode...\n");
 		ret = iwl5000_load_given_ucode(priv,
 			&priv->ucode_code, &priv->ucode_data);
 		if (!ret) {
-			IWL_DEBUG_INFO("Runtime ucode load complete.\n");
+			IWL_DEBUG_INFO(priv, "Runtime ucode load complete.\n");
 			priv->ucode_type = UCODE_RT;
 		}
 	}
@@ -660,7 +663,7 @@
 	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
 		/* We had an error bringing up the hardware, so take it
 		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Initialize Alive failed.\n");
+		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
 		goto restart;
 	}
 
@@ -670,7 +673,7 @@
 	if (iwl_verify_ucode(priv)) {
 		/* Runtime instruction load was bad;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
+		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
 		goto restart;
 	}
 
@@ -713,7 +716,7 @@
 
 	txq->sched_retry = scd_retry;
 
-	IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
+	IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
 		       active ? "Activate" : "Deactivate",
 		       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 }
@@ -840,8 +843,18 @@
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
-	priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
-	priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
+
+	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+	case CSR_HW_REV_TYPE_6x00:
+	case CSR_HW_REV_TYPE_6x50:
+		priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+		priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+		break;
+	default:
+		priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
+		priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
+	}
+
 	priv->hw_params.max_bsm_size = 0;
 	priv->hw_params.fat_channel =  BIT(IEEE80211_BAND_2GHZ) |
 					BIT(IEEE80211_BAND_5GHZ);
@@ -849,54 +862,25 @@
 
 	priv->hw_params.sens = &iwl5000_sensitivity;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_5100:
-		priv->hw_params.tx_chains_num = 1;
-		priv->hw_params.rx_chains_num = 2;
-		priv->hw_params.valid_tx_ant = ANT_B;
-		priv->hw_params.valid_rx_ant = ANT_AB;
-		break;
-	case CSR_HW_REV_TYPE_5150:
-		priv->hw_params.tx_chains_num = 1;
-		priv->hw_params.rx_chains_num = 2;
-		priv->hw_params.valid_tx_ant = ANT_A;
-		priv->hw_params.valid_rx_ant = ANT_AB;
-		break;
-	case CSR_HW_REV_TYPE_5300:
-	case CSR_HW_REV_TYPE_5350:
-		priv->hw_params.tx_chains_num = 3;
-		priv->hw_params.rx_chains_num = 3;
-		priv->hw_params.valid_tx_ant = ANT_ABC;
-		priv->hw_params.valid_rx_ant = ANT_ABC;
-		break;
-	}
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
 	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_5100:
-	case CSR_HW_REV_TYPE_5300:
-	case CSR_HW_REV_TYPE_5350:
-		/* 5X00 and 5350 wants in Celsius */
-		priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
-		break;
 	case CSR_HW_REV_TYPE_5150:
 		/* 5150 wants in Kelvin */
 		priv->hw_params.ct_kill_threshold =
 				iwl5150_get_ct_threshold(priv);
 		break;
+	default:
+		/* all others want Celsius */
+		priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+		break;
 	}
 
 	/* Set initial calibration set */
 	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_5100:
-	case CSR_HW_REV_TYPE_5300:
-	case CSR_HW_REV_TYPE_5350:
-		priv->hw_params.calib_init_cfg =
-			BIT(IWL_CALIB_XTAL)		|
-			BIT(IWL_CALIB_LO)		|
-			BIT(IWL_CALIB_TX_IQ) 		|
-			BIT(IWL_CALIB_TX_IQ_PERD)	|
-			BIT(IWL_CALIB_BASE_BAND);
-		break;
 	case CSR_HW_REV_TYPE_5150:
 		priv->hw_params.calib_init_cfg =
 			BIT(IWL_CALIB_DC)		|
@@ -905,6 +889,14 @@
 			BIT(IWL_CALIB_BASE_BAND);
 
 		break;
+	default:
+		priv->hw_params.calib_init_cfg =
+			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_LO)		|
+			BIT(IWL_CALIB_TX_IQ) 		|
+			BIT(IWL_CALIB_TX_IQ_PERD)	|
+			BIT(IWL_CALIB_BASE_BAND);
+		break;
 	}
 
 
@@ -1113,7 +1105,7 @@
 	return 0;
 }
 
-static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
+u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
 	u16 size = (u16)sizeof(struct iwl_addsta_cmd);
 	memcpy(data, cmd, size);
@@ -1151,7 +1143,7 @@
 	u16 seq;
 
 	if (agg->wait_for_ba)
-		IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
+		IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
 
 	agg->frame_count = tx_resp->frame_count;
 	agg->start_idx = start_idx;
@@ -1165,7 +1157,7 @@
 		idx = start_idx;
 
 		/* FIXME: code repetition */
-		IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
+		IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
 				   agg->frame_count, agg->start_idx, idx);
 
 		info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
@@ -1177,9 +1169,9 @@
 
 		/* FIXME: code repetition end */
 
-		IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
+		IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
 				    status & 0xff, tx_resp->failure_frame);
-		IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
+		IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
 
 		agg->wait_for_ba = 0;
 	} else {
@@ -1199,7 +1191,7 @@
 				      AGG_TX_STATE_ABORT_MSK))
 				continue;
 
-			IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
+			IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
 					   agg->frame_count, txq_id, idx);
 
 			hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
@@ -1214,7 +1206,7 @@
 				return -1;
 			}
 
-			IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
+			IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
 					   i, idx, SEQ_TO_SN(sc));
 
 			sh = idx - start;
@@ -1232,13 +1224,13 @@
 				sh = 0;
 			}
 			bitmap |= 1ULL << sh;
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+			IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
 					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
 		agg->start_idx = start;
-		IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
+		IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
 				   agg->frame_count, agg->start_idx,
 				   (unsigned long long)agg->bitmap);
 
@@ -1291,7 +1283,7 @@
 
 		if (txq->q.read_ptr != (scd_ssn & 0xff)) {
 			index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
-			IWL_DEBUG_TX_REPLY("Retry scheduler reclaim "
+			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim "
 					"scd_ssn=%d idx=%d txq=%d swq=%d\n",
 					scd_ssn , index, txq_id, txq->swq_id);
 
@@ -1318,7 +1310,7 @@
 					le32_to_cpu(tx_resp->rate_n_flags),
 					info);
 
-		IWL_DEBUG_TX_REPLY("TXQ %d status %s (0x%08x) rate_n_flags "
+		IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
 				   "0x%x retries %d\n",
 				   txq_id,
 				   iwl_get_tx_fail_reason(status), status,
@@ -1342,7 +1334,7 @@
 }
 
 /* Currently 5000 is the superset of everything */
-static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len)
+u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len)
 {
 	return len;
 }
@@ -1389,7 +1381,7 @@
 	    (rxon1->acquisition_data == rxon2->acquisition_data) &&
 	    (rxon1->rx_chain == rxon2->rx_chain) &&
 	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
 		return 0;
 	}
 
@@ -1419,12 +1411,19 @@
 static int  iwl5000_send_tx_power(struct iwl_priv *priv)
 {
 	struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
+	u8 tx_ant_cfg_cmd;
 
 	/* half dBm need to multiply */
 	tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
 	tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
 	tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
-	return  iwl_send_cmd_pdu_async(priv, REPLY_TX_POWER_DBM_CMD,
+
+	if (IWL_UCODE_API(priv->ucode_ver) == 1)
+		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
+	else
+		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
+
+	return  iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
 				       sizeof(tx_power_cmd), &tx_power_cmd,
 				       NULL);
 }
@@ -1436,7 +1435,7 @@
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
-static int iwl5000_calc_rssi(struct iwl_priv *priv,
+int iwl5000_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp)
 {
 	/* data from PHY/DSP regarding signal strength, etc.,
@@ -1465,7 +1464,7 @@
 	max_rssi = max_t(u32, rssi_a, rssi_b);
 	max_rssi = max_t(u32, max_rssi, rssi_c);
 
-	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+	IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
 		rssi_a, rssi_b, rssi_c, max_rssi, agc);
 
 	/* dBm = max_rssi dB - agc dB - constant.
@@ -1473,11 +1472,11 @@
 	return max_rssi - agc - IWL49_RSSI_OFFSET;
 }
 
-static struct iwl_hcmd_ops iwl5000_hcmd = {
+struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
 };
 
-static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
+struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
 	.get_hcmd_size = iwl5000_get_hcmd_size,
 	.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
 	.gain_computation = iwl5000_gain_computation,
@@ -1486,7 +1485,7 @@
 	.calc_rssi = iwl5000_calc_rssi,
 };
 
-static struct iwl_lib_ops iwl5000_lib = {
+struct iwl_lib_ops iwl5000_lib = {
 	.set_hw_params = iwl5000_hw_set_hw_params,
 	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
@@ -1556,6 +1555,9 @@
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_ABC,
+	.valid_rx_ant = ANT_ABC,
+	.need_pll_cfg = true,
 };
 
 struct iwl_cfg iwl5100_bg_cfg = {
@@ -1569,6 +1571,9 @@
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_B,
+	.valid_rx_ant = ANT_AB,
+	.need_pll_cfg = true,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
@@ -1582,6 +1587,9 @@
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_B,
+	.valid_rx_ant = ANT_AB,
+	.need_pll_cfg = true,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
@@ -1595,6 +1603,9 @@
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_B,
+	.valid_rx_ant = ANT_AB,
+	.need_pll_cfg = true,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1608,6 +1619,9 @@
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_ABC,
+	.valid_rx_ant = ANT_ABC,
+	.need_pll_cfg = true,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1621,6 +1635,9 @@
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_A,
+	.valid_rx_ant = ANT_AB,
+	.need_pll_cfg = true,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 4515a60..edfa5e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -46,8 +46,8 @@
 #include "iwl-5000-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL6000_UCODE_API_MAX 1
-#define IWL6050_UCODE_API_MAX 1
+#define IWL6000_UCODE_API_MAX 2
+#define IWL6050_UCODE_API_MAX 2
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 1
@@ -61,17 +61,33 @@
 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
 
+static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
+	.get_hcmd_size = iwl5000_get_hcmd_size,
+	.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
+	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
+	.calc_rssi = iwl5000_calc_rssi,
+};
+
+static struct iwl_ops iwl6000_ops = {
+	.lib = &iwl5000_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl6000_hcmd_utils,
+};
+
 struct iwl_cfg iwl6000_2ag_cfg = {
 	.name = "6000 Series 2x2 AG",
 	.fw_name_pre = IWL6000_FW_PRE,
 	.ucode_api_max = IWL6000_UCODE_API_MAX,
 	.ucode_api_min = IWL6000_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G,
-	.ops = &iwl5000_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.need_pll_cfg = false,
 };
 
 struct iwl_cfg iwl6000_2agn_cfg = {
@@ -80,11 +96,14 @@
 	.ucode_api_max = IWL6000_UCODE_API_MAX,
 	.ucode_api_min = IWL6000_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.need_pll_cfg = false,
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -93,11 +112,14 @@
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.need_pll_cfg = false,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -106,11 +128,14 @@
 	.ucode_api_max = IWL6000_UCODE_API_MAX,
 	.ucode_api_min = IWL6000_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_ABC,
+	.valid_rx_ant = ANT_ABC,
+	.need_pll_cfg = false,
 };
 
 struct iwl_cfg iwl6050_3agn_cfg = {
@@ -119,11 +144,14 @@
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_ABC,
+	.valid_rx_ant = ANT_ABC,
+	.need_pll_cfg = false,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c
deleted file mode 100644
index 1217a1d..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <net/mac80211.h>
-#include "iwl-dev.h"
-#include "iwl-debug.h"
-#include "iwl-commands.h"
-
-
-/**
- * iwl_check_rxon_cmd - validate RXON structure is valid
- *
- * NOTE:  This is really only useful during development and can eventually
- * be #ifdef'd out once the driver is stable and folks aren't actively
- * making changes
- */
-int iwl_agn_check_rxon_cmd(struct iwl_priv *priv)
-{
-	int error = 0;
-	int counter = 1;
-	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-
-	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
-		error |= le32_to_cpu(rxon->flags &
-				(RXON_FLG_TGJ_NARROW_BAND_MSK |
-				 RXON_FLG_RADAR_DETECT_MSK));
-		if (error)
-			IWL_WARN(priv, "check 24G fields %d | %d\n",
-				    counter++, error);
-	} else {
-		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
-				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
-		if (error)
-			IWL_WARN(priv, "check 52 fields %d | %d\n",
-				    counter++, error);
-		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
-		if (error)
-			IWL_WARN(priv, "check 52 CCK %d | %d\n",
-				    counter++, error);
-	}
-	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
-	if (error)
-		IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error);
-
-	/* make sure basic rates 6Mbps and 1Mbps are supported */
-	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
-		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
-	if (error)
-		IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error);
-
-	error |= (le16_to_cpu(rxon->assoc_id) > 2007);
-	if (error)
-		IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
-	if (error)
-		IWL_WARN(priv, "check CCK and short slot %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
-	if (error)
-		IWL_WARN(priv, "check CCK & auto detect %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
-			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
-	if (error)
-		IWL_WARN(priv, "check TGG and auto detect %d | %d\n",
-			    counter++, error);
-
-	if (error)
-		IWL_WARN(priv, "Tuning to channel %d\n",
-			    le16_to_cpu(rxon->channel));
-
-	if (error) {
-		IWL_ERR(priv, "Not a valid iwl_rxon_assoc_cmd field values\n");
-		return -1;
-	}
-	return 0;
-}
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 13039a0..04b42c8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -360,7 +360,7 @@
 				      struct ieee80211_sta *sta)
 {
 	if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
-		IWL_DEBUG_HT("Starting Tx agg: STA: %pM tid: %d\n",
+		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
 				sta->addr, tid);
 		ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
 	}
@@ -693,7 +693,7 @@
 			break;
 		if (rate_mask & (1 << low))
 			break;
-		IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
+		IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
 	}
 
 	high = index;
@@ -703,7 +703,7 @@
 			break;
 		if (rate_mask & (1 << high))
 			break;
-		IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
+		IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
 	}
 
 	return (high << 8) | low;
@@ -790,7 +790,7 @@
 	u8 active_index = 0;
 	s32 tpt = 0;
 
-	IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
+	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
 
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    is_multicast_ether_addr(hdr->addr1))
@@ -840,7 +840,7 @@
 	    (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
 	    (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
 	     hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
-		IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
+		IWL_DEBUG_RATE(priv, "initial rate does not match 0x%x\n", tx_rate);
 		/* the last LQ command could failed so the LQ in ucode not
 		 * the same in driver sync up
 		 */
@@ -971,7 +971,7 @@
 static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
 				 struct iwl_lq_sta *lq_sta)
 {
-	IWL_DEBUG_RATE("we are staying in the same table\n");
+	IWL_DEBUG_RATE(priv, "we are staying in the same table\n");
 	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
 	if (is_legacy) {
 		lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
@@ -1150,7 +1150,7 @@
 	if (priv->hw_params.tx_chains_num < 2)
 		return -1;
 
-	IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n");
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n");
 
 	tbl->lq_type = LQ_MIMO2;
 	tbl->is_dup = lq_sta->is_dup;
@@ -1179,16 +1179,16 @@
 
 	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
 
-	IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+	IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
 
 	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n",
+		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
 						rate, rate_mask);
 		return -1;
 	}
 	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
 
-	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
 		     tbl->current_rate, is_green);
 	return 0;
 }
@@ -1209,7 +1209,7 @@
 	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
 		return -1;
 
-	IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n");
 
 	tbl->is_dup = lq_sta->is_dup;
 	tbl->lq_type = LQ_SISO;
@@ -1240,14 +1240,14 @@
 	rs_set_expected_tpt_table(lq_sta, tbl);
 	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
 
-	IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
+	IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask);
 	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n",
+		IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n",
 			     rate, rate_mask);
 		return -1;
 	}
 	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
-	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
 		     tbl->current_rate, is_green);
 	return 0;
 }
@@ -1276,7 +1276,7 @@
 		switch (tbl->action) {
 		case IWL_LEGACY_SWITCH_ANTENNA1:
 		case IWL_LEGACY_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n");
+			IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
 
 			lq_sta->action_counter++;
 
@@ -1300,7 +1300,7 @@
 			}
 			break;
 		case IWL_LEGACY_SWITCH_SISO:
-			IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n");
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n");
 
 			/* Set up search table to try SISO */
 			memcpy(search_tbl, tbl, sz);
@@ -1316,7 +1316,7 @@
 		case IWL_LEGACY_SWITCH_MIMO2_AB:
 		case IWL_LEGACY_SWITCH_MIMO2_AC:
 		case IWL_LEGACY_SWITCH_MIMO2_BC:
-			IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n");
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n");
 
 			/* Set up search table to try MIMO */
 			memcpy(search_tbl, tbl, sz);
@@ -1385,7 +1385,7 @@
 		switch (tbl->action) {
 		case IWL_SISO_SWITCH_ANTENNA1:
 		case IWL_SISO_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
+			IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n");
 
 			if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
 							tx_chains_num <= 1) ||
@@ -1404,7 +1404,7 @@
 		case IWL_SISO_SWITCH_MIMO2_AB:
 		case IWL_SISO_SWITCH_MIMO2_AC:
 		case IWL_SISO_SWITCH_MIMO2_BC:
-			IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n");
+			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n");
 			memcpy(search_tbl, tbl, sz);
 			search_tbl->is_SGI = 0;
 
@@ -1433,7 +1433,7 @@
 						HT_SHORT_GI_40MHZ))
 				break;
 
-			IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
+			IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
 
 			memcpy(search_tbl, tbl, sz);
 			if (is_green) {
@@ -1498,7 +1498,7 @@
 		switch (tbl->action) {
 		case IWL_MIMO2_SWITCH_ANTENNA1:
 		case IWL_MIMO2_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE("LQ: MIMO toggle Antennas\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle Antennas\n");
 
 			if (tx_chains_num <= 2)
 				break;
@@ -1514,7 +1514,7 @@
 		case IWL_MIMO2_SWITCH_SISO_A:
 		case IWL_MIMO2_SWITCH_SISO_B:
 		case IWL_MIMO2_SWITCH_SISO_C:
-			IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n");
 
 			/* Set up new search table for SISO */
 			memcpy(search_tbl, tbl, sz);
@@ -1546,7 +1546,7 @@
 						HT_SHORT_GI_40MHZ))
 				break;
 
-			IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle SGI/NGI\n");
 
 			/* Set up new search table for MIMO */
 			memcpy(search_tbl, tbl, sz);
@@ -1629,7 +1629,7 @@
 		    (lq_sta->total_success > lq_sta->max_success_limit) ||
 		    ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
 		     && (flush_interval_passed))) {
-			IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:",
+			IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:",
 				     lq_sta->total_failed,
 				     lq_sta->total_success,
 				     flush_interval_passed);
@@ -1652,7 +1652,7 @@
 			    lq_sta->table_count_limit) {
 				lq_sta->table_count = 0;
 
-				IWL_DEBUG_RATE("LQ: stay in table clear win\n");
+				IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n");
 				for (i = 0; i < IWL_RATE_COUNT; i++)
 					rs_rate_scale_clear_window(
 						&(tbl->win[i]));
@@ -1701,7 +1701,7 @@
 	s32 sr;
 	u8 tid = MAX_TID_COUNT;
 
-	IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
+	IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
 
 	/* Send management frames and broadcast/multicast data using
 	 * lowest rate. */
@@ -1733,13 +1733,13 @@
 	/* current tx rate */
 	index = lq_sta->last_txrate_idx;
 
-	IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
+	IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index,
 		       tbl->lq_type);
 
 	/* rates available for this association, and for modulation mode */
 	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
 
-	IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
+	IWL_DEBUG_RATE(priv, "mask 0x%04X \n", rate_mask);
 
 	/* mask with station rate restriction */
 	if (is_legacy(tbl->lq_type)) {
@@ -1789,7 +1789,7 @@
 	fail_count = window->counter - window->success_counter;
 	if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
 			(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
-		IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
+		IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d "
 			       "for index %d\n",
 			       window->success_counter, window->counter, index);
 
@@ -1817,7 +1817,7 @@
 		 * continuing to use the setup that we've been trying. */
 		if (window->average_tpt > lq_sta->last_tpt) {
 
-			IWL_DEBUG_RATE("LQ: SWITCHING TO NEW TABLE "
+			IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE "
 					"suc=%d cur-tpt=%d old-tpt=%d\n",
 					window->success_ratio,
 					window->average_tpt,
@@ -1833,7 +1833,7 @@
 		/* Else poor success; go back to mode in "active" table */
 		} else {
 
-			IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
+			IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE "
 					"suc=%d cur-tpt=%d old-tpt=%d\n",
 					window->success_ratio,
 					window->average_tpt,
@@ -1886,7 +1886,7 @@
 
 	/* Too many failures, decrease rate */
 	if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
-		IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
+		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
 		scale_action = -1;
 
 	/* No throughput measured yet for adjacent rates; try increase. */
@@ -1917,8 +1917,8 @@
 					sr >= IWL_RATE_INCREASE_TH) {
 				scale_action = 1;
 			} else {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of high tpt\n");
+				IWL_DEBUG_RATE(priv,
+				    "decrease rate because of high tpt\n");
 				scale_action = -1;
 			}
 
@@ -1926,8 +1926,8 @@
 		} else if (low_tpt != IWL_INVALID_VALUE) {
 			/* Lower rate has better throughput */
 			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of low tpt\n");
+				IWL_DEBUG_RATE(priv,
+				    "decrease rate because of low tpt\n");
 				scale_action = -1;
 			} else if (sr >= IWL_RATE_INCREASE_TH) {
 				scale_action = 1;
@@ -1964,7 +1964,7 @@
 		break;
 	}
 
-	IWL_DEBUG_RATE("choose rate scale index %d action %d low %d "
+	IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d "
 		    "high %d type %d\n",
 		     index, scale_action, low, high, tbl->lq_type);
 
@@ -2008,7 +2008,7 @@
 			/* Use new "search" start rate */
 			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
 
-			IWL_DEBUG_RATE("Switch current  mcs: %X index: %d\n",
+			IWL_DEBUG_RATE(priv, "Switch current  mcs: %X index: %d\n",
 				     tbl->current_rate, index);
 			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
 			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
@@ -2023,7 +2023,7 @@
 		if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
 		    lq_sta->action_counter >= 1) {
 			lq_sta->action_counter = 0;
-			IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
+			IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
 			rs_set_stay_in_table(priv, 1, lq_sta);
 		}
 
@@ -2035,7 +2035,7 @@
 			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
 			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
 			    (tid != MAX_TID_COUNT)) {
-				IWL_DEBUG_RATE("try to aggregate tid %d\n", tid);
+				IWL_DEBUG_RATE(priv, "try to aggregate tid %d\n", tid);
 				rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
 			}
 			lq_sta->action_counter = 0;
@@ -2131,7 +2131,7 @@
 	int rate_idx;
 	u64 mask_bit = 0;
 
-	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
+	IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
 
 	/* Get max rate if user set max rate */
 	if (lq_sta) {
@@ -2167,7 +2167,7 @@
 		u8 sta_id = iwl_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE("LQ: ADD station %pM\n",
+			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
 				       hdr->addr1);
 			sta_id = iwl_add_station_flags(priv, hdr->addr1,
 							0, CMD_ASYNC, NULL);
@@ -2196,7 +2196,7 @@
 	int i, j;
 
 	priv = (struct iwl_priv *)priv_rate;
-	IWL_DEBUG_RATE("create station rate scale window\n");
+	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
 
 	lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
 
@@ -2229,7 +2229,7 @@
 		for (i = 0; i < IWL_RATE_COUNT; i++)
 			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
 
-	IWL_DEBUG_RATE("LQ: *** rate scale station global init ***\n");
+	IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init ***\n");
 	/* TODO: what is a good starting rate for STA? About middle? Maybe not
 	 * the lowest or the highest rate.. Could consider using RSSI from
 	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
@@ -2240,10 +2240,10 @@
 		u8 sta_id = iwl_find_station(priv, sta->addr);
 
 		/* for IBSS the call are from tasklet */
-		IWL_DEBUG_RATE("LQ: ADD station %pM\n", sta->addr);
+		IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
 
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE("LQ: ADD station %pM\n", sta->addr);
+			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
 			sta_id = iwl_add_station_flags(priv, sta->addr,
 							0, CMD_ASYNC, NULL);
 		}
@@ -2282,7 +2282,7 @@
 	lq_sta->active_mimo3_rate &= ~((u16)0x2);
 	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
 
-	IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
+	IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
 		     lq_sta->active_siso_rate,
 		     lq_sta->active_mimo2_rate,
 		     lq_sta->active_mimo3_rate);
@@ -2448,9 +2448,9 @@
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_priv *priv __maybe_unused = priv_r;
 
-	IWL_DEBUG_RATE("enter\n");
+	IWL_DEBUG_RATE(priv, "enter\n");
 	kfree(lq_sta);
-	IWL_DEBUG_RATE("leave\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
 
@@ -2475,9 +2475,9 @@
 			else
 				*rate_n_flags = 0x820A;
 		}
-		IWL_DEBUG_RATE("Fixed rate ON\n");
+		IWL_DEBUG_RATE(priv, "Fixed rate ON\n");
 	} else {
-		IWL_DEBUG_RATE("Fixed rate OFF\n");
+		IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
 	}
 }
 
@@ -2506,7 +2506,7 @@
 	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
 	lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
 
-	IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
+	IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n",
 		lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
 
 	if (lq_sta->dbg_fixed_rate) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6b7120a..c196abc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -94,66 +94,6 @@
 
 /**************************************************************/
 
-
-
-static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
-{
-	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-
-	if (hw_decrypt)
-		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
-	else
-		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
-
-}
-
-/**
- * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
- * @priv: staging_rxon is compared to active_rxon
- *
- * If the RXON structure is changing enough to require a new tune,
- * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
- * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
- */
-static int iwl_full_rxon_required(struct iwl_priv *priv)
-{
-
-	/* These items are only settable from the full RXON command */
-	if (!(iwl_is_associated(priv)) ||
-	    compare_ether_addr(priv->staging_rxon.bssid_addr,
-			       priv->active_rxon.bssid_addr) ||
-	    compare_ether_addr(priv->staging_rxon.node_addr,
-			       priv->active_rxon.node_addr) ||
-	    compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
-			       priv->active_rxon.wlap_bssid_addr) ||
-	    (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
-	    (priv->staging_rxon.channel != priv->active_rxon.channel) ||
-	    (priv->staging_rxon.air_propagation !=
-	     priv->active_rxon.air_propagation) ||
-	    (priv->staging_rxon.ofdm_ht_single_stream_basic_rates !=
-	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
-	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
-	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
-	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
-		return 1;
-
-	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
-	 * be updated with the RXON_ASSOC command -- however only some
-	 * flag transitions are allowed using RXON_ASSOC */
-
-	/* Check if we are not switching bands */
-	if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
-	    (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
-		return 1;
-
-	/* Check if we are switching association toggle */
-	if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
-		(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
-		return 1;
-
-	return 0;
-}
-
 /**
  * iwl_commit_rxon - commit staging_rxon to hardware
  *
@@ -179,7 +119,7 @@
 	 * 5000, but will not damage 4965 */
 	priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
 
-	ret = iwl_agn_check_rxon_cmd(priv);
+	ret = iwl_check_rxon_cmd(priv);
 	if (ret) {
 		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
 		return -EINVAL;
@@ -207,7 +147,7 @@
 	 * we must clear the associated from the active configuration
 	 * before we apply the new config */
 	if (iwl_is_associated(priv) && new_assoc) {
-		IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
+		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 
 		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
@@ -223,7 +163,7 @@
 		}
 	}
 
-	IWL_DEBUG_INFO("Sending RXON\n"
+	IWL_DEBUG_INFO(priv, "Sending RXON\n"
 		       "* with%s RXON_FILTER_ASSOC_MSK\n"
 		       "* channel = %d\n"
 		       "* bssid = %pM\n",
@@ -314,7 +254,7 @@
 {
 	struct list_head *element;
 
-	IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
+	IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
 		       priv->frames_count);
 
 	while (!list_empty(&priv->free_frames)) {
@@ -374,31 +314,6 @@
 	return priv->ibss_beacon->len;
 }
 
-static u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv)
-{
-	int i;
-	int rate_mask;
-
-	/* Set rate mask*/
-	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK;
-	else
-		rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK;
-
-	/* Find lowest valid rate */
-	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
-					i = iwl_rates[i].next_ieee) {
-		if (rate_mask & (1 << i))
-			return iwl_rates[i].plcp;
-	}
-
-	/* No valid rate was found. Assign the lowest one */
-	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		return IWL_RATE_1M_PLCP;
-	else
-		return IWL_RATE_6M_PLCP;
-}
-
 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 				       struct iwl_frame *frame, u8 rate)
 {
@@ -623,7 +538,7 @@
 	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
 	struct ieee80211_sta *sta;
 
-	IWL_DEBUG_MAC80211("enter: \n");
+	IWL_DEBUG_MAC80211(priv, "enter: \n");
 
 	if (!iwl_conf->is_ht)
 		return;
@@ -683,7 +598,7 @@
 
 	rcu_read_unlock();
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 /*
@@ -708,7 +623,7 @@
 		priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
 
 	if (force || iwl_is_associated(priv)) {
-		IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+		IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
 				priv->qos_data.qos_active,
 				priv->qos_data.def_qos_parm.qos_flags);
 
@@ -765,117 +680,16 @@
 	priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_ASSOC("beacon interval %d beacon timer %d beacon tim %d\n",
+	IWL_DEBUG_ASSOC(priv, "beacon interval %d beacon timer %d beacon tim %d\n",
 			le16_to_cpu(priv->rxon_timing.beacon_interval),
 			le32_to_cpu(priv->rxon_timing.beacon_init_val),
 			le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static void iwl_set_flags_for_band(struct iwl_priv *priv,
-				   enum ieee80211_band band)
-{
-	if (band == IEEE80211_BAND_5GHZ) {
-		priv->staging_rxon.flags &=
-		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
-		      | RXON_FLG_CCK_MSK);
-		priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-	} else {
-		/* Copied from iwl_post_associate() */
-		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
-		priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
-		priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
-	}
-}
-
-/*
- * initialize rxon structure with default values from eeprom
- */
-static void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
-{
-	const struct iwl_channel_info *ch_info;
-
-	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
-
-	switch (mode) {
-	case NL80211_IFTYPE_AP:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
-		break;
-
-	case NL80211_IFTYPE_STATION:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
-		priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case NL80211_IFTYPE_ADHOC:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
-		priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
-		priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
-						  RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case NL80211_IFTYPE_MONITOR:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
-		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
-		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-	default:
-		IWL_ERR(priv, "Unsupported interface type %d\n", mode);
-		break;
-	}
-
-#if 0
-	/* TODO:  Figure out when short_preamble would be set and cache from
-	 * that */
-	if (!hw_to_local(priv->hw)->short_preamble)
-		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-#endif
-
-	ch_info = iwl_get_channel_info(priv, priv->band,
-				       le16_to_cpu(priv->active_rxon.channel));
-
-	if (!ch_info)
-		ch_info = &priv->channel_info[0];
-
-	/*
-	 * in some case A channels are all non IBSS
-	 * in this case force B/G channel
-	 */
-	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
-	    !(is_channel_ibss(ch_info)))
-		ch_info = &priv->channel_info[0];
-
-	priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
-	priv->band = ch_info->band;
-
-	iwl_set_flags_for_band(priv, priv->band);
-
-	priv->staging_rxon.ofdm_basic_rates =
-	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-	priv->staging_rxon.cck_basic_rates =
-	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
-	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
-	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
-	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
-	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
-	iwl_set_rxon_chain(priv);
-}
-
 static int iwl_set_mode(struct iwl_priv *priv, int mode)
 {
 	iwl_connection_init_rx_config(priv, mode);
+	iwl_set_rxon_chain(priv);
 	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 
 	iwl_clear_stations_table(priv);
@@ -887,7 +701,7 @@
 	cancel_delayed_work(&priv->scan_check);
 	if (iwl_scan_cancel_timeout(priv, 100)) {
 		IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-		IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+		IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
 		return -EAGAIN;
 	}
 
@@ -896,54 +710,6 @@
 	return 0;
 }
 
-static void iwl_set_rate(struct iwl_priv *priv)
-{
-	const struct ieee80211_supported_band *hw = NULL;
-	struct ieee80211_rate *rate;
-	int i;
-
-	hw = iwl_get_hw_mode(priv, priv->band);
-	if (!hw) {
-		IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n");
-		return;
-	}
-
-	priv->active_rate = 0;
-	priv->active_rate_basic = 0;
-
-	for (i = 0; i < hw->n_bitrates; i++) {
-		rate = &(hw->bitrates[i]);
-		if (rate->hw_value < IWL_RATE_COUNT)
-			priv->active_rate |= (1 << rate->hw_value);
-	}
-
-	IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
-		       priv->active_rate, priv->active_rate_basic);
-
-	/*
-	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
-	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
-	 * OFDM
-	 */
-	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
-		priv->staging_rxon.cck_basic_rates =
-		    ((priv->active_rate_basic &
-		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
-	else
-		priv->staging_rxon.cck_basic_rates =
-		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
-	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
-		priv->staging_rxon.ofdm_basic_rates =
-		    ((priv->active_rate_basic &
-		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
-		      IWL_FIRST_OFDM_RATE) & 0xFF;
-	else
-		priv->staging_rxon.ofdm_basic_rates =
-		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-}
-
-
 /******************************************************************************
  *
  * Generic RX handler implementations
@@ -958,19 +724,19 @@
 
 	palive = &pkt->u.alive_frame;
 
-	IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
+	IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
 		       "0x%01X 0x%01X\n",
 		       palive->is_valid, palive->ver_type,
 		       palive->ver_subtype);
 
 	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
-		IWL_DEBUG_INFO("Initialization Alive received.\n");
+		IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 		memcpy(&priv->card_alive_init,
 		       &pkt->u.alive_frame,
 		       sizeof(struct iwl_init_alive_resp));
 		pwork = &priv->init_alive_start;
 	} else {
-		IWL_DEBUG_INFO("Runtime Alive received.\n");
+		IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 		memcpy(&priv->card_alive, &pkt->u.alive_frame,
 		       sizeof(struct iwl_alive_resp));
 		pwork = &priv->alive_start;
@@ -999,26 +765,13 @@
 		le32_to_cpu(pkt->u.err_resp.error_info));
 }
 
-#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
-
-static void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
-	struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
-	IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
-		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
-	rxon->channel = csa->channel;
-	priv->staging_rxon.channel = csa->channel;
-}
-
 static void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
 				      struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
-	IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
+	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
 #endif
 }
@@ -1027,7 +780,7 @@
 					     struct iwl_rx_mem_buffer *rxb)
 {
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
+	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
 			"notification for %s:\n",
 			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
 	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
@@ -1091,7 +844,7 @@
 		(struct iwl4965_beacon_notif *)pkt->u.raw;
 	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
 
-	IWL_DEBUG_RX("beacon status %x retries %d iss %d "
+	IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
 		"tsf %d %d rate %d\n",
 		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
 		beacon->beacon_notify_hdr.failure_frame,
@@ -1114,7 +867,7 @@
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
-	IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
+	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
 			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
 			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
 
@@ -1276,7 +1029,7 @@
 
 	/* Rx interrupt, but nothing sent from uCode */
 	if (i == r)
-		IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i);
+		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 
 	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
 		fill_rx = 1;
@@ -1316,12 +1069,12 @@
 		 *   handle those that need handling via function in
 		 *   rx_handlers table.  See iwl_setup_rx_handlers() */
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
-			IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r,
+			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
-			IWL_DEBUG(IWL_DL_RX,
+			IWL_DEBUG_RX(priv,
 				"r %d i %d No handler needed for %s, 0x%02x\n",
 				r, i, get_cmd_string(pkt->hdr.cmd),
 				pkt->hdr.cmd);
@@ -1370,27 +1123,6 @@
 	iwl_rx_queue_restock(priv);
 }
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static void iwl_print_rx_config_cmd(struct iwl_priv *priv)
-{
-	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-
-	IWL_DEBUG_RADIO("RX CONFIG:\n");
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
-	IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
-	IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
-	IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
-			le32_to_cpu(rxon->filter_flags));
-	IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
-	IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
-			rxon->ofdm_basic_rates);
-	IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
-	IWL_DEBUG_RADIO("u8[6] node_addr: %pM\n", rxon->node_addr);
-	IWL_DEBUG_RADIO("u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
-	IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
-}
-#endif
-
 /* call this function to flush any scheduled tasklet */
 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 {
@@ -1399,45 +1131,6 @@
 	tasklet_kill(&priv->irq_tasklet);
 }
 
-/**
- * iwl_irq_handle_error - called for HW or SW error interrupt from card
- */
-static void iwl_irq_handle_error(struct iwl_priv *priv)
-{
-	/* Set the FW error flag -- cleared on iwl_down */
-	set_bit(STATUS_FW_ERROR, &priv->status);
-
-	/* Cancel currently queued command. */
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & IWL_DL_FW_ERRORS) {
-		iwl_dump_nic_error_log(priv);
-		iwl_dump_nic_event_log(priv);
-		iwl_print_rx_config_cmd(priv);
-	}
-#endif
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	/* Keep the restart process from trying to send host
-	 * commands by clearing the INIT status bit */
-	clear_bit(STATUS_READY, &priv->status);
-
-	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_DEBUG(IWL_DL_FW_ERRORS,
-			  "Restarting adapter due to uCode error.\n");
-
-		if (iwl_is_associated(priv)) {
-			memcpy(&priv->recovery_rxon, &priv->active_rxon,
-			       sizeof(priv->recovery_rxon));
-			priv->error_recovering = 1;
-		}
-		if (priv->cfg->mod_params->restart_fw)
-			queue_work(priv->workqueue, &priv->restart);
-	}
-}
-
 static void iwl_error_recovery(struct iwl_priv *priv)
 {
 	unsigned long flags;
@@ -1482,7 +1175,7 @@
 	if (priv->debug_level & IWL_DL_ISR) {
 		/* just for debug */
 		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
 			      inta, inta_mask, inta_fh);
 	}
 #endif
@@ -1516,12 +1209,12 @@
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
 		if (inta & CSR_INT_BIT_SCD)
-			IWL_DEBUG_ISR("Scheduler finished to transmit "
+			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
 
 		/* Alive notification via Rx interrupt will do the real work */
 		if (inta & CSR_INT_BIT_ALIVE)
-			IWL_DEBUG_ISR("Alive interrupt\n");
+			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -1534,7 +1227,7 @@
 				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
 			hw_rf_kill = 1;
 
-		IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n",
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
 				hw_rf_kill ? "disable radio" : "enable radio");
 
 		/* driver only loads ucode once setting the interface up.
@@ -1569,7 +1262,7 @@
 
 	/* uCode wakes up after power-down sleep */
 	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR("Wakeup interrupt\n");
+		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
 		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
 		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
@@ -1590,7 +1283,7 @@
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR("Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
 		handled |= CSR_INT_BIT_FH_TX;
 		/* FH finished to write, send event */
 		priv->ucode_write_complete = 1;
@@ -1616,7 +1309,7 @@
 		inta = iwl_read32(priv, CSR_INT);
 		inta_mask = iwl_read32(priv, CSR_INT_MASK);
 		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+		IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
@@ -1648,7 +1341,7 @@
 	 * This may be due to IRQ shared with another device,
 	 * or due to sporadic interrupts thrown from our NIC. */
 	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
 		goto none;
 	}
 
@@ -1659,7 +1352,7 @@
 		goto unplugged;
 	}
 
-	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
 		      inta, inta_mask, inta_fh);
 
 	inta &= ~CSR_INT_BIT_SCD;
@@ -1741,7 +1434,7 @@
 					"Please use API v%u instead.\n",
 					  buf, api_max);
 
-			IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
+			IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
 				       buf, ucode_raw->size);
 			break;
 		}
@@ -1792,17 +1485,17 @@
 	       IWL_UCODE_API(priv->ucode_ver),
 	       IWL_UCODE_SERIAL(priv->ucode_ver));
 
-	IWL_DEBUG_INFO("f/w package hdr ucode version raw = 0x%x\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
 		       priv->ucode_ver);
-	IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
 		       inst_size);
-	IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
 		       data_size);
-	IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
 		       init_size);
-	IWL_DEBUG_INFO("f/w package hdr init data size = %u\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
 		       init_data_size);
-	IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
 		       boot_size);
 
 	/* Verify size of file vs. image size info in file's header */
@@ -1810,7 +1503,7 @@
 		inst_size + data_size + init_size +
 		init_data_size + boot_size) {
 
-		IWL_DEBUG_INFO("uCode file size %d too small\n",
+		IWL_DEBUG_INFO(priv, "uCode file size %d too small\n",
 			       (int)ucode_raw->size);
 		ret = -EINVAL;
 		goto err_release;
@@ -1818,36 +1511,33 @@
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > priv->hw_params.max_inst_size) {
-		IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 
 	if (data_size > priv->hw_params.max_data_size) {
-		IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 				data_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (init_size > priv->hw_params.max_inst_size) {
-		IWL_DEBUG_INFO
-		    ("uCode init instr len %d too large to fit in\n",
-		      init_size);
+		IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
+			init_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (init_data_size > priv->hw_params.max_data_size) {
-		IWL_DEBUG_INFO
-		    ("uCode init data len %d too large to fit in\n",
+		IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
 		      init_data_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (boot_size > priv->hw_params.max_bsm_size) {
-		IWL_DEBUG_INFO
-		    ("uCode boot instr len %d too large to fit in\n",
-		      boot_size);
+		IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
+			boot_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
@@ -1896,16 +1586,16 @@
 	/* Runtime instructions (first block of data in file) */
 	src = &ucode->data[0];
 	len = priv->ucode_code.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
+	IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
 	memcpy(priv->ucode_code.v_addr, src, len);
-	IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+	IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
 		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
 
 	/* Runtime data (2nd block)
 	 * NOTE:  Copy into backup buffer will be done in iwl_up()  */
 	src = &ucode->data[inst_size];
 	len = priv->ucode_data.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
+	IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
 	memcpy(priv->ucode_data.v_addr, src, len);
 	memcpy(priv->ucode_data_backup.v_addr, src, len);
 
@@ -1913,7 +1603,7 @@
 	if (init_size) {
 		src = &ucode->data[inst_size + data_size];
 		len = priv->ucode_init.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
+		IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
 				len);
 		memcpy(priv->ucode_init.v_addr, src, len);
 	}
@@ -1922,7 +1612,7 @@
 	if (init_data_size) {
 		src = &ucode->data[inst_size + data_size + init_size];
 		len = priv->ucode_init_data.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n",
+		IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
 			       len);
 		memcpy(priv->ucode_init_data.v_addr, src, len);
 	}
@@ -1930,7 +1620,7 @@
 	/* Bootstrap instructions (5th block) */
 	src = &ucode->data[inst_size + data_size + init_size + init_data_size];
 	len = priv->ucode_boot.len;
-	IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len);
+	IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
 	/* We have our copies now, allow OS release its copies */
@@ -1962,12 +1652,12 @@
 {
 	int ret = 0;
 
-	IWL_DEBUG_INFO("Runtime Alive received.\n");
+	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 
 	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
 		/* We had an error bringing up the hardware, so take it
 		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Alive failed.\n");
+		IWL_DEBUG_INFO(priv, "Alive failed.\n");
 		goto restart;
 	}
 
@@ -1977,7 +1667,7 @@
 	if (iwl_verify_ucode(priv)) {
 		/* Runtime instruction load was bad;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad runtime uCode load.\n");
+		IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
 		goto restart;
 	}
 
@@ -2010,6 +1700,7 @@
 	} else {
 		/* Initialize our rx_config data */
 		iwl_connection_init_rx_config(priv, priv->iw_mode);
+		iwl_set_rxon_chain(priv);
 		memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 	}
 
@@ -2026,7 +1717,7 @@
 
 	iwl_leds_register(priv);
 
-	IWL_DEBUG_INFO("ALIVE processing complete.\n");
+	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
@@ -2060,7 +1751,7 @@
 	unsigned long flags;
 	int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
 
-	IWL_DEBUG_INFO(DRV_NAME " is going down\n");
+	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
 
 	if (!exit_pending)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
@@ -2241,7 +1932,7 @@
 		/* start card; "initialize" will load runtime ucode */
 		iwl_nic_start(priv);
 
-		IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
+		IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
 
 		return 0;
 	}
@@ -2362,7 +2053,7 @@
 		return;
 	}
 
-	IWL_DEBUG_ASSOC("Associated as %d to: %pM\n",
+	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
 			priv->assoc_id, priv->active_rxon.bssid_addr);
 
 
@@ -2395,7 +2086,7 @@
 	iwl_set_rxon_chain(priv);
 	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
 
-	IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
+	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
 			priv->assoc_id, priv->beacon_int);
 
 	if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
@@ -2468,7 +2159,7 @@
 	struct iwl_priv *priv = hw->priv;
 	int ret;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
@@ -2498,7 +2189,7 @@
 	if (iwl_is_rfkill(priv))
 		goto out;
 
-	IWL_DEBUG_INFO("Start UP work done.\n");
+	IWL_DEBUG_INFO(priv, "Start UP work done.\n");
 
 	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
 		return 0;
@@ -2518,7 +2209,7 @@
 
 out:
 	priv->is_open = 1;
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
 
@@ -2526,10 +2217,10 @@
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211("leave - skip\n");
+		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
 		return;
 	}
 
@@ -2552,22 +2243,22 @@
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
 	iwl_enable_interrupts(priv);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MACDUMP("enter\n");
+	IWL_DEBUG_MACDUMP(priv, "enter\n");
 
-	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+	IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
 	if (iwl_tx_skb(priv, skb))
 		dev_kfree_skb_any(skb);
 
-	IWL_DEBUG_MACDUMP("leave\n");
+	IWL_DEBUG_MACDUMP(priv, "leave\n");
 	return NETDEV_TX_OK;
 }
 
@@ -2577,10 +2268,10 @@
 	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
+	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
 
 	if (priv->vif) {
-		IWL_DEBUG_MAC80211("leave - vif != NULL\n");
+		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -2593,7 +2284,7 @@
 	mutex_lock(&priv->mutex);
 
 	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211("Set %pM\n", conf->mac_addr);
+		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
 		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
 	}
 
@@ -2603,7 +2294,7 @@
 
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
 
@@ -2624,12 +2315,12 @@
 	u16 channel;
 
 	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d\n", conf->channel->hw_value);
 
 	priv->current_ht_config.is_ht = conf_is_ht(conf);
 
 	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - waiting for uCode\n");
 		goto out;
 	}
 
@@ -2637,14 +2328,14 @@
 		iwl_radio_kill_sw_disable_radio(priv);
 
 	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		ret = -EIO;
 		goto out;
 	}
 
 	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
 		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211("leave - scanning\n");
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
 		mutex_unlock(&priv->mutex);
 		return 0;
 	}
@@ -2652,7 +2343,7 @@
 	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
 	ch_info = iwl_get_channel_info(priv, conf->channel->band, channel);
 	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_MAC80211("leave - invalid channel\n");
+		IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -2697,12 +2388,12 @@
 #endif
 
 	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211("leave - radio disabled\n");
+		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
 		goto out;
 	}
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF kill\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -2712,9 +2403,9 @@
 	else
 		ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
 	if (ret)
-		IWL_DEBUG_MAC80211("Error setting power level\n");
+		IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
 
-	IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
+	IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
 			   priv->tx_power_user_lmt, conf->power_level);
 
 	iwl_set_tx_power(priv, conf->power_level, false);
@@ -2728,9 +2419,9 @@
 		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
 		iwl_commit_rxon(priv);
 	else
-		IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
+		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 out:
 	mutex_unlock(&priv->mutex);
@@ -2811,7 +2502,7 @@
 		return -EIO;
 
 	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
+		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
 		return 0;
 	}
 
@@ -2833,7 +2524,7 @@
 	mutex_lock(&priv->mutex);
 
 	if (conf->bssid)
-		IWL_DEBUG_MAC80211("bssid: %pM\n", conf->bssid);
+		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
 
 /*
  * very dubious code was here; the probe filtering flag is never set:
@@ -2846,7 +2537,7 @@
 		if (!conf->bssid) {
 			conf->bssid = priv->mac_addr;
 			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211("bssid was set to: %pM\n",
+			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
 					   conf->bssid);
 		}
 		if (priv->ibss_beacon)
@@ -2865,7 +2556,7 @@
 		if (iwl_scan_cancel_timeout(priv, 100)) {
 			IWL_WARN(priv, "Aborted scan still in progress "
 				    "after 100ms\n");
-			IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
 			mutex_unlock(&priv->mutex);
 			return -EAGAIN;
 		}
@@ -2893,64 +2584,18 @@
 	}
 
  done:
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
 
-static void iwl_configure_filter(struct ieee80211_hw *hw,
-				 unsigned int changed_flags,
-				 unsigned int *total_flags,
-				 int mc_count, struct dev_addr_list *mc_list)
-{
-	struct iwl_priv *priv = hw->priv;
-	__le32 *filter_flags = &priv->staging_rxon.filter_flags;
-
-	IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
-			changed_flags, *total_flags);
-
-	if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) {
-		if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS))
-			*filter_flags |= RXON_FILTER_PROMISC_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_PROMISC_MSK;
-	}
-	if (changed_flags & FIF_ALLMULTI) {
-		if (*total_flags & FIF_ALLMULTI)
-			*filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK;
-	}
-	if (changed_flags & FIF_CONTROL) {
-		if (*total_flags & FIF_CONTROL)
-			*filter_flags |= RXON_FILTER_CTL2HOST_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_CTL2HOST_MSK;
-	}
-	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
-		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
-			*filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK;
-	}
-
-	/* We avoid iwl_commit_rxon here to commit the new filter flags
-	 * since mac80211 will call ieee80211_hw_config immediately.
-	 * (mc_list is not supported at this time). Otherwise, we need to
-	 * queue a background iwl_commit_rxon work.
-	 */
-
-	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
-			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
 static void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	mutex_lock(&priv->mutex);
 
@@ -2965,7 +2610,7 @@
 	}
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 }
 
@@ -2977,10 +2622,10 @@
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("changes = 0x%X\n", changes);
+	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
 
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
+		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
 				   bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
 			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
@@ -2989,7 +2634,7 @@
 	}
 
 	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
+		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
 			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
 		else
@@ -3002,7 +2647,7 @@
 	}
 
 	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc);
+		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
 		/* This should never happen as this function should
 		 * never be called from interrupt context. */
 		if (WARN_ON_ONCE(in_interrupt()))
@@ -3024,10 +2669,10 @@
 			mutex_unlock(&priv->mutex);
 		} else {
 			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc);
+			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
 		}
 	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211("Associated Changes %d\n", changes);
+			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
 			iwl_send_rxon_assoc(priv);
 	}
 
@@ -3039,14 +2684,14 @@
 	struct iwl_priv *priv = hw->priv;
 	int ret;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	mutex_lock(&priv->mutex);
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!iwl_is_ready_rf(priv)) {
 		ret = -EIO;
-		IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready or exit pending\n");
 		goto out_unlock;
 	}
 
@@ -3056,7 +2701,7 @@
 	 */
 	if (priv->next_scan_jiffies &&
 	    time_after(priv->next_scan_jiffies, jiffies)) {
-		IWL_DEBUG_SCAN("scan rejected: within next scan period\n");
+		IWL_DEBUG_SCAN(priv, "scan rejected: within next scan period\n");
 		queue_work(priv->workqueue, &priv->scan_completed);
 		ret = 0;
 		goto out_unlock;
@@ -3065,7 +2710,7 @@
 	/* if we just finished scan ask for delay */
 	if (iwl_is_associated(priv) && priv->last_scan_jiffies &&
 	    time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) {
-		IWL_DEBUG_SCAN("scan rejected: within previous scan period\n");
+		IWL_DEBUG_SCAN(priv, "scan rejected: within previous scan period\n");
 		queue_work(priv->workqueue, &priv->scan_completed);
 		ret = 0;
 		goto out_unlock;
@@ -3081,7 +2726,7 @@
 
 	ret = iwl_scan_initiate(priv);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 out_unlock:
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -3096,11 +2741,11 @@
 {
 
 	struct iwl_priv *priv = hw->priv;
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	iwl_update_tkip_key(priv, keyconf, addr, iv32, phase1key);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3114,16 +2759,16 @@
 	u8 sta_id;
 	bool is_default_wep_key = false;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (priv->hw_params.sw_crypto) {
-		IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
+		IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
 		return -EOPNOTSUPP;
 	}
 	addr = sta ? sta->addr : iwl_bcast_addr;
 	sta_id = iwl_find_station(priv, addr);
 	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_MAC80211("leave - %pM not in station map.\n",
+		IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 				   addr);
 		return -EINVAL;
 
@@ -3153,7 +2798,7 @@
 		else
 			ret = iwl_set_dynamic_key(priv, key, sta_id);
 
-		IWL_DEBUG_MAC80211("enable hwcrypto key\n");
+		IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
 		break;
 	case DISABLE_KEY:
 		if (is_default_wep_key)
@@ -3161,13 +2806,13 @@
 		else
 			ret = iwl_remove_dynamic_key(priv, key, sta_id);
 
-		IWL_DEBUG_MAC80211("disable hwcrypto key\n");
+		IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
 		break;
 	default:
 		ret = -EINVAL;
 	}
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 	return ret;
 }
@@ -3179,15 +2824,15 @@
 	unsigned long flags;
 	int q;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
 	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
 		return 0;
 	}
 
@@ -3211,7 +2856,7 @@
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
 
@@ -3221,7 +2866,7 @@
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_HT("A-MPDU action on addr %pM tid %d\n",
+	IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
 		     sta->addr, tid);
 
 	if (!(priv->cfg->sku & IWL_SKU_N))
@@ -3229,19 +2874,19 @@
 
 	switch (action) {
 	case IEEE80211_AMPDU_RX_START:
-		IWL_DEBUG_HT("start Rx\n");
+		IWL_DEBUG_HT(priv, "start Rx\n");
 		return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
 	case IEEE80211_AMPDU_RX_STOP:
-		IWL_DEBUG_HT("stop Rx\n");
+		IWL_DEBUG_HT(priv, "stop Rx\n");
 		return iwl_sta_rx_agg_stop(priv, sta->addr, tid);
 	case IEEE80211_AMPDU_TX_START:
-		IWL_DEBUG_HT("start Tx\n");
+		IWL_DEBUG_HT(priv, "start Tx\n");
 		return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
 	case IEEE80211_AMPDU_TX_STOP:
-		IWL_DEBUG_HT("stop Tx\n");
+		IWL_DEBUG_HT(priv, "stop Tx\n");
 		return iwl_tx_agg_stop(priv, sta->addr, tid);
 	default:
-		IWL_DEBUG_HT("unknown\n");
+		IWL_DEBUG_HT(priv, "unknown\n");
 		return -EINVAL;
 		break;
 	}
@@ -3257,10 +2902,10 @@
 	struct iwl_queue *q;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
@@ -3278,7 +2923,7 @@
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 	return 0;
 }
@@ -3289,8 +2934,8 @@
 	struct iwl_priv *priv = hw->priv;
 
 	priv = hw->priv;
-	IWL_DEBUG_MAC80211("enter\n");
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 	return 0;
 }
@@ -3301,7 +2946,7 @@
 	unsigned long flags;
 
 	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	spin_lock_irqsave(&priv->lock, flags);
 	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
@@ -3328,7 +2973,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}
@@ -3357,7 +3002,7 @@
 						     IEEE80211_CHAN_RADAR))
 				iwl_power_disable_management(priv, 3000);
 
-		IWL_DEBUG_MAC80211("leave - not in IBSS\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}
@@ -3366,7 +3011,7 @@
 
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -3375,15 +3020,15 @@
 	unsigned long flags;
 	__le64 timestamp;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211("leave - not IBSS\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
 		return -EIO;
 	}
 
@@ -3398,7 +3043,7 @@
 	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
 	priv->timestamp = le64_to_cpu(timestamp);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	iwl_reset_qos(priv);
@@ -3556,7 +3201,7 @@
 		if (iwl_scan_cancel_timeout(priv, 100))
 			IWL_WARN(priv, "Could not cancel scan.\n");
 		else {
-			IWL_DEBUG_INFO("Commit rxon.flags = 0x%04X\n", flags);
+			IWL_DEBUG_INFO(priv, "Commit rxon.flags = 0x%04X\n", flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
 			iwl_commit_rxon(priv);
 		}
@@ -3595,7 +3240,7 @@
 		if (iwl_scan_cancel_timeout(priv, 100))
 			IWL_WARN(priv, "Could not cancel scan.\n");
 		else {
-			IWL_DEBUG_INFO("Committing rxon.filter_flags = "
+			IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
 				       "0x%04X\n", filter_flags);
 			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
@@ -3632,7 +3277,7 @@
 
 	ret = iwl_power_set_user_mode(priv, mode);
 	if (ret) {
-		IWL_DEBUG_MAC80211("failed setting power mode.\n");
+		IWL_DEBUG_MAC80211(priv, "failed setting power mode.\n");
 		goto out;
 	}
 	ret = count;
@@ -3833,7 +3478,7 @@
 
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
-	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
+	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
 
@@ -3882,9 +3527,9 @@
 		goto out_pci_release_regions;
 	}
 
-	IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
+	IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
 		(unsigned long long) pci_resource_len(pdev, 0));
-	IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
+	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
 
 	iwl_hw_detect(priv);
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
@@ -3897,7 +3542,7 @@
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
-		IWL_DEBUG_INFO("Failed to init APMG\n");
+		IWL_DEBUG_INFO(priv, "Failed to init APMG\n");
 		goto out_iounmap;
 	}
 	/*****************
@@ -3915,7 +3560,7 @@
 
 	/* extract MAC Address */
 	iwl_eeprom_get_mac(priv, priv->mac_addr);
-	IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr);
+	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
 	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
 
 	/************************
@@ -3942,7 +3587,7 @@
 	/* Disable radio (SW RF KILL) via parameter when loading driver */
 	if (priv->cfg->mod_params->disable) {
 		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO("Radio disabled.\n");
+		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
 	}
 
 	/********************
@@ -4036,7 +3681,7 @@
 	if (!priv)
 		return;
 
-	IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
+	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
 
 	iwl_dbgfs_unregister(priv);
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
@@ -4119,9 +3764,12 @@
 static int iwl_pci_resume(struct pci_dev *pdev)
 {
 	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	int ret;
 
 	pci_set_power_state(pdev, PCI_D0);
-	pci_enable_device(pdev);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 	pci_restore_state(pdev);
 	iwl_enable_interrupts(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 8e5e666..735f3f1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -202,7 +202,7 @@
 		val = data->nrg_silence_rssi[i];
 		silence_ref = max(silence_ref, val);
 	}
-	IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
+	IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n",
 			silence_rssi_a, silence_rssi_b, silence_rssi_c,
 			silence_ref);
 
@@ -226,7 +226,7 @@
 		max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
 	max_nrg_cck += 6;
 
-	IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
+	IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
 			rx_info->beacon_energy_a, rx_info->beacon_energy_b,
 			rx_info->beacon_energy_c, max_nrg_cck - 6);
 
@@ -236,15 +236,15 @@
 		data->num_in_cck_no_fa++;
 	else
 		data->num_in_cck_no_fa = 0;
-	IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
+	IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n",
 			data->num_in_cck_no_fa);
 
 	/* If we got too many false alarms this time, reduce sensitivity */
 	if ((false_alarms > max_false_alarms) &&
 		(data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
-		IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
+		IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n",
 		     false_alarms, max_false_alarms);
-		IWL_DEBUG_CALIB("... reducing sensitivity\n");
+		IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n");
 		data->nrg_curr_state = IWL_FA_TOO_MANY;
 		/* Store for "fewer than desired" on later beacon */
 		data->nrg_silence_ref = silence_ref;
@@ -266,7 +266,7 @@
 		data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
 						   (s32)silence_ref;
 
-		IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
+		IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n",
 			 false_alarms, min_false_alarms,
 			 data->nrg_auto_corr_silence_diff);
 
@@ -280,17 +280,17 @@
 			((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
 			(data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
 
-			IWL_DEBUG_CALIB("... increasing sensitivity\n");
+			IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n");
 			/* Increase nrg value to increase sensitivity */
 			val = data->nrg_th_cck + NRG_STEP_CCK;
 			data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
 		} else {
-			IWL_DEBUG_CALIB("... but not changing sensitivity\n");
+			IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n");
 		}
 
 	/* Else we got a healthy number of false alarms, keep status quo */
 	} else {
-		IWL_DEBUG_CALIB(" FA in safe zone\n");
+		IWL_DEBUG_CALIB(priv, " FA in safe zone\n");
 		data->nrg_curr_state = IWL_FA_GOOD_RANGE;
 
 		/* Store for use in "fewer than desired" with later beacon */
@@ -300,7 +300,7 @@
 		 *   give it some extra margin by reducing sensitivity again
 		 *   (but don't go below measured energy of desired Rx) */
 		if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
-			IWL_DEBUG_CALIB("... increasing margin\n");
+			IWL_DEBUG_CALIB(priv, "... increasing margin\n");
 			if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
 				data->nrg_th_cck -= NRG_MARGIN;
 			else
@@ -314,7 +314,7 @@
 	 * Lower value is higher energy, so we use max()!
 	 */
 	data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
-	IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
+	IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck);
 
 	data->nrg_prev_state = data->nrg_curr_state;
 
@@ -367,7 +367,7 @@
 	/* If we got too many false alarms this time, reduce sensitivity */
 	if (false_alarms > max_false_alarms) {
 
-		IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
+		IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n",
 			     false_alarms, max_false_alarms);
 
 		val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
@@ -390,7 +390,7 @@
 	/* Else if we got fewer than desired, increase sensitivity */
 	else if (false_alarms < min_false_alarms) {
 
-		IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
+		IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n",
 			     false_alarms, min_false_alarms);
 
 		val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
@@ -409,7 +409,7 @@
 		data->auto_corr_ofdm_mrc_x1 =
 			max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
 	} else {
-		IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
+		IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n",
 			 min_false_alarms, false_alarms, max_false_alarms);
 	}
 	return 0;
@@ -452,18 +452,18 @@
 				cpu_to_le16((u16)data->nrg_th_ofdm);
 
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
-				__constant_cpu_to_le16(190);
+				cpu_to_le16(190);
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
-				__constant_cpu_to_le16(390);
+				cpu_to_le16(390);
 	cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
-				__constant_cpu_to_le16(62);
+				cpu_to_le16(62);
 
-	IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
+	IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
 			data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
 			data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
 			data->nrg_th_ofdm);
 
-	IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
+	IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n",
 			data->auto_corr_cck, data->auto_corr_cck_mrc,
 			data->nrg_th_cck);
 
@@ -473,7 +473,7 @@
 	/* Don't send command to uCode if nothing has changed */
 	if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
 		    sizeof(u16)*HD_TABLE_SIZE)) {
-		IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
+		IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
 		return 0;
 	}
 
@@ -498,7 +498,7 @@
 	if (priv->disable_sens_cal)
 		return;
 
-	IWL_DEBUG_CALIB("Start iwl_init_sensitivity\n");
+	IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n");
 
 	/* Clear driver's sensitivity algo data */
 	data = &(priv->sensitivity_data);
@@ -536,7 +536,7 @@
 	data->last_fa_cnt_cck = 0;
 
 	ret |= iwl_sensitivity_write(priv);
-	IWL_DEBUG_CALIB("<<return 0x%X\n", ret);
+	IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret);
 }
 EXPORT_SYMBOL(iwl_init_sensitivity);
 
@@ -562,13 +562,13 @@
 	data = &(priv->sensitivity_data);
 
 	if (!iwl_is_associated(priv)) {
-		IWL_DEBUG_CALIB("<< - not associated\n");
+		IWL_DEBUG_CALIB(priv, "<< - not associated\n");
 		return;
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
-		IWL_DEBUG_CALIB("<< invalid data.\n");
+		IWL_DEBUG_CALIB(priv, "<< invalid data.\n");
 		spin_unlock_irqrestore(&priv->lock, flags);
 		return;
 	}
@@ -595,10 +595,10 @@
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
+	IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
 
 	if (!rx_enable_time) {
-		IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
+		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0! \n");
 		return;
 	}
 
@@ -637,7 +637,7 @@
 	norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
 	norm_fa_cck = fa_cck + bad_plcp_cck;
 
-	IWL_DEBUG_CALIB("cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
+	IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
 			bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
 
 	iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
@@ -690,13 +690,13 @@
 	 *   then we're done forever. */
 	if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
 		if (data->state == IWL_CHAIN_NOISE_ALIVE)
-			IWL_DEBUG_CALIB("Wait for noise calib reset\n");
+			IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
 		return;
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
-		IWL_DEBUG_CALIB(" << Interference data unavailable\n");
+		IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n");
 		spin_unlock_irqrestore(&priv->lock, flags);
 		return;
 	}
@@ -709,7 +709,7 @@
 	/* Make sure we accumulate data for just the associated channel
 	 *   (even if scanning). */
 	if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
-		IWL_DEBUG_CALIB("Stats not from chan=%d, band24=%d\n",
+		IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n",
 				rxon_chnum, rxon_band24);
 		spin_unlock_irqrestore(&priv->lock, flags);
 		return;
@@ -739,11 +739,11 @@
 	data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
 	data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
 
-	IWL_DEBUG_CALIB("chan=%d, band24=%d, beacon=%d\n",
+	IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n",
 			rxon_chnum, rxon_band24, data->beacon_count);
-	IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
+	IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n",
 			chain_sig_a, chain_sig_b, chain_sig_c);
-	IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
+	IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
 			chain_noise_a, chain_noise_b, chain_noise_c);
 
 	/* If this is the 20th beacon, determine:
@@ -773,9 +773,9 @@
 		active_chains = (1 << max_average_sig_antenna_i);
 	}
 
-	IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
+	IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
 		     average_sig[0], average_sig[1], average_sig[2]);
-	IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
+	IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
 		     max_average_sig, max_average_sig_antenna_i);
 
 	/* Compare signal strengths for all 3 receivers. */
@@ -789,7 +789,7 @@
 				data->disconn_array[i] = 1;
 			else
 				active_chains |= (1 << i);
-			IWL_DEBUG_CALIB("i = %d  rssiDelta = %d  "
+			IWL_DEBUG_CALIB(priv, "i = %d  rssiDelta = %d  "
 			     "disconn_array[i] = %d\n",
 			     i, rssi_delta, data->disconn_array[i]);
 		}
@@ -813,7 +813,7 @@
 			 * disconnected connect it anyway */
 			data->disconn_array[i] = 0;
 			active_chains |= ant_msk;
-			IWL_DEBUG_CALIB("All Tx chains are disconnected W/A - "
+			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - "
 				"declare %d as connected\n", i);
 			break;
 		}
@@ -821,7 +821,7 @@
 
 	/* Save for use within RXON, TX, SCAN commands, etc. */
 	priv->chain_noise_data.active_chains = active_chains;
-	IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
+	IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
 			active_chains);
 
 	/* Analyze noise for rx balance */
@@ -839,15 +839,16 @@
 		}
 	}
 
-	IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
+	IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n",
 			average_noise[0], average_noise[1],
 			average_noise[2]);
 
-	IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
+	IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n",
 			min_average_noise, min_average_noise_antenna_i);
 
-	priv->cfg->ops->utils->gain_computation(priv, average_noise,
-		min_average_noise_antenna_i, min_average_noise);
+	if (priv->cfg->ops->utils->gain_computation)
+		priv->cfg->ops->utils->gain_computation(priv, average_noise,
+			min_average_noise_antenna_i, min_average_noise);
 
 	/* Some power changes may have been made during the calibration.
 	 * Update and commit the RXON
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e49415c..29d4074 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -144,9 +144,11 @@
 	WHO_IS_AWAKE_NOTIFICATION = 0x94,	/* not used */
 
 	/* Miscellaneous commands */
+	REPLY_TX_POWER_DBM_CMD = 0x95,
 	QUIET_NOTIFICATION = 0x96,		/* not used */
 	REPLY_TX_PWR_TABLE_CMD = 0x97,
-	REPLY_TX_POWER_DBM_CMD = 0x98,
+	REPLY_TX_POWER_DBM_CMD_V1 = 0x98,	/* old version of API */
+	TX_ANT_CONFIGURATION_CMD = 0x98,	/* not used */
 	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
 
 	/* Bluetooth device coexistence config command */
@@ -2846,7 +2848,7 @@
 	__le32 reserved2;
 } __attribute__ ((packed));
 
-#define INTERFERENCE_DATA_AVAILABLE      __constant_cpu_to_le32(1)
+#define INTERFERENCE_DATA_AVAILABLE      cpu_to_le32(1)
 
 struct statistics_rx_non_phy {
 	__le32 bogus_cts;	/* CTS received when not expecting CTS */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 21f3865..e18c3f3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -28,6 +28,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/etherdevice.h>
 #include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
@@ -322,7 +323,7 @@
 			priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 		}
 	}
-	IWL_DEBUG_QOS("set QoS to default \n");
+	IWL_DEBUG_QOS(priv, "set QoS to default \n");
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -403,6 +404,7 @@
 	}
 }
 
+
 /**
  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  */
@@ -417,7 +419,7 @@
 
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
 	    priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
-		IWL_DEBUG_INFO("Geography modes already initialized.\n");
+		IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n");
 		set_bit(STATUS_GEO_CONFIGURED, &priv->status);
 		return 0;
 	}
@@ -499,7 +501,7 @@
 		/* Save flags for reg domain usage */
 		geo_ch->orig_flags = geo_ch->flags;
 
-		IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
+		IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
 				ch->channel, geo_ch->center_freq,
 				is_channel_a_band(ch) ?  "5.2" : "2.4",
 				geo_ch->flags & IEEE80211_CHAN_DISABLED ?
@@ -586,6 +588,167 @@
 }
 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 
+void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
+{
+	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+	if (hw_decrypt)
+		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
+	else
+		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
+
+}
+EXPORT_SYMBOL(iwl_set_rxon_hwcrypto);
+
+/**
+ * iwl_check_rxon_cmd - validate RXON structure is valid
+ *
+ * NOTE:  This is really only useful during development and can eventually
+ * be #ifdef'd out once the driver is stable and folks aren't actively
+ * making changes
+ */
+int iwl_check_rxon_cmd(struct iwl_priv *priv)
+{
+	int error = 0;
+	int counter = 1;
+	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
+		error |= le32_to_cpu(rxon->flags &
+				(RXON_FLG_TGJ_NARROW_BAND_MSK |
+				 RXON_FLG_RADAR_DETECT_MSK));
+		if (error)
+			IWL_WARN(priv, "check 24G fields %d | %d\n",
+				    counter++, error);
+	} else {
+		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
+				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
+		if (error)
+			IWL_WARN(priv, "check 52 fields %d | %d\n",
+				    counter++, error);
+		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
+		if (error)
+			IWL_WARN(priv, "check 52 CCK %d | %d\n",
+				    counter++, error);
+	}
+	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
+	if (error)
+		IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error);
+
+	/* make sure basic rates 6Mbps and 1Mbps are supported */
+	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
+		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
+	if (error)
+		IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error);
+
+	error |= (le16_to_cpu(rxon->assoc_id) > 2007);
+	if (error)
+		IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
+	if (error)
+		IWL_WARN(priv, "check CCK and short slot %d | %d\n",
+			    counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
+	if (error)
+		IWL_WARN(priv, "check CCK & auto detect %d | %d\n",
+			    counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
+			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
+	if (error)
+		IWL_WARN(priv, "check TGG and auto detect %d | %d\n",
+			    counter++, error);
+
+	if (error)
+		IWL_WARN(priv, "Tuning to channel %d\n",
+			    le16_to_cpu(rxon->channel));
+
+	if (error) {
+		IWL_ERR(priv, "Not a valid iwl_rxon_assoc_cmd field values\n");
+		return -1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(iwl_check_rxon_cmd);
+
+/**
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * @priv: staging_rxon is compared to active_rxon
+ *
+ * If the RXON structure is changing enough to require a new tune,
+ * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
+ * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
+ */
+int iwl_full_rxon_required(struct iwl_priv *priv)
+{
+
+	/* These items are only settable from the full RXON command */
+	if (!(iwl_is_associated(priv)) ||
+	    compare_ether_addr(priv->staging_rxon.bssid_addr,
+			       priv->active_rxon.bssid_addr) ||
+	    compare_ether_addr(priv->staging_rxon.node_addr,
+			       priv->active_rxon.node_addr) ||
+	    compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
+			       priv->active_rxon.wlap_bssid_addr) ||
+	    (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
+	    (priv->staging_rxon.channel != priv->active_rxon.channel) ||
+	    (priv->staging_rxon.air_propagation !=
+	     priv->active_rxon.air_propagation) ||
+	    (priv->staging_rxon.ofdm_ht_single_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
+	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
+	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
+		return 1;
+
+	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
+	 * be updated with the RXON_ASSOC command -- however only some
+	 * flag transitions are allowed using RXON_ASSOC */
+
+	/* Check if we are not switching bands */
+	if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
+	    (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
+		return 1;
+
+	/* Check if we are switching association toggle */
+	if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
+		(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
+		return 1;
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_full_rxon_required);
+
+u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv)
+{
+	int i;
+	int rate_mask;
+
+	/* Set rate mask*/
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
+		rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK;
+	else
+		rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK;
+
+	/* Find lowest valid rate */
+	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
+					i = iwl_rates[i].next_ieee) {
+		if (rate_mask & (1 << i))
+			return iwl_rates[i].plcp;
+	}
+
+	/* No valid rate was found. Assign the lowest one */
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
+		return IWL_RATE_1M_PLCP;
+	else
+		return IWL_RATE_6M_PLCP;
+}
+EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
+
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
@@ -627,7 +790,7 @@
 
 	iwl_set_rxon_chain(priv);
 
-	IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
+	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
 			"rxon flags 0x%X operation mode :0x%X "
 			"extension channel offset 0x%x\n",
 			ht_info->mcs.rx_mask[0],
@@ -773,7 +936,7 @@
 	else
 		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 
-	IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
+	IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
 			priv->staging_rxon.rx_chain,
 			active_rx_cnt, idle_rx_cnt);
 
@@ -798,7 +961,7 @@
 	u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
 
 	if (!iwl_get_channel_info(priv, band, channel)) {
-		IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
+		IWL_DEBUG_INFO(priv, "Could not set channel to %d [%d]\n",
 			       channel, band);
 		return -EINVAL;
 	}
@@ -815,12 +978,283 @@
 
 	priv->band = band;
 
-	IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
+	IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band);
 
 	return 0;
 }
 EXPORT_SYMBOL(iwl_set_rxon_channel);
 
+void iwl_set_flags_for_band(struct iwl_priv *priv,
+			    enum ieee80211_band band)
+{
+	if (band == IEEE80211_BAND_5GHZ) {
+		priv->staging_rxon.flags &=
+		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
+		      | RXON_FLG_CCK_MSK);
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	} else {
+		/* Copied from iwl_post_associate() */
+		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
+		priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
+		priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
+	}
+}
+EXPORT_SYMBOL(iwl_set_flags_for_band);
+
+/*
+ * initialize rxon structure with default values from eeprom
+ */
+void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
+{
+	const struct iwl_channel_info *ch_info;
+
+	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
+
+	switch (mode) {
+	case NL80211_IFTYPE_AP:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
+		priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_ADHOC:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
+		priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
+		priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
+						  RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_MONITOR:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
+		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
+		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+	default:
+		IWL_ERR(priv, "Unsupported interface type %d\n", mode);
+		break;
+	}
+
+#if 0
+	/* TODO:  Figure out when short_preamble would be set and cache from
+	 * that */
+	if (!hw_to_local(priv->hw)->short_preamble)
+		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+#endif
+
+	ch_info = iwl_get_channel_info(priv, priv->band,
+				       le16_to_cpu(priv->active_rxon.channel));
+
+	if (!ch_info)
+		ch_info = &priv->channel_info[0];
+
+	/*
+	 * in some case A channels are all non IBSS
+	 * in this case force B/G channel
+	 */
+	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
+	    !(is_channel_ibss(ch_info)))
+		ch_info = &priv->channel_info[0];
+
+	priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
+	priv->band = ch_info->band;
+
+	iwl_set_flags_for_band(priv, priv->band);
+
+	priv->staging_rxon.ofdm_basic_rates =
+	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
+	priv->staging_rxon.cck_basic_rates =
+	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
+
+	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
+					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
+	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
+	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
+	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
+}
+EXPORT_SYMBOL(iwl_connection_init_rx_config);
+
+void iwl_set_rate(struct iwl_priv *priv)
+{
+	const struct ieee80211_supported_band *hw = NULL;
+	struct ieee80211_rate *rate;
+	int i;
+
+	hw = iwl_get_hw_mode(priv, priv->band);
+	if (!hw) {
+		IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n");
+		return;
+	}
+
+	priv->active_rate = 0;
+	priv->active_rate_basic = 0;
+
+	for (i = 0; i < hw->n_bitrates; i++) {
+		rate = &(hw->bitrates[i]);
+		if (rate->hw_value < IWL_RATE_COUNT)
+			priv->active_rate |= (1 << rate->hw_value);
+	}
+
+	IWL_DEBUG_RATE(priv, "Set active_rate = %0x, active_rate_basic = %0x\n",
+		       priv->active_rate, priv->active_rate_basic);
+
+	/*
+	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
+	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
+	 * OFDM
+	 */
+	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
+		priv->staging_rxon.cck_basic_rates =
+		    ((priv->active_rate_basic &
+		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
+	else
+		priv->staging_rxon.cck_basic_rates =
+		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
+
+	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
+		priv->staging_rxon.ofdm_basic_rates =
+		    ((priv->active_rate_basic &
+		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
+		      IWL_FIRST_OFDM_RATE) & 0xFF;
+	else
+		priv->staging_rxon.ofdm_basic_rates =
+		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
+}
+EXPORT_SYMBOL(iwl_set_rate);
+
+void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
+	struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
+	IWL_DEBUG_11H(priv, "CSA notif: channel %d, status %d\n",
+		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
+	rxon->channel = csa->channel;
+	priv->staging_rxon.channel = csa->channel;
+}
+EXPORT_SYMBOL(iwl_rx_csa);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+static void iwl_print_rx_config_cmd(struct iwl_priv *priv)
+{
+	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+	IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+	IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
+	IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
+	IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
+			le32_to_cpu(rxon->filter_flags));
+	IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type);
+	IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n",
+			rxon->ofdm_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr);
+	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
+	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
+}
+#endif
+
+/**
+ * iwl_irq_handle_error - called for HW or SW error interrupt from card
+ */
+void iwl_irq_handle_error(struct iwl_priv *priv)
+{
+	/* Set the FW error flag -- cleared on iwl_down */
+	set_bit(STATUS_FW_ERROR, &priv->status);
+
+	/* Cancel currently queued command. */
+	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & IWL_DL_FW_ERRORS) {
+		iwl_dump_nic_error_log(priv);
+		iwl_dump_nic_event_log(priv);
+		iwl_print_rx_config_cmd(priv);
+	}
+#endif
+
+	wake_up_interruptible(&priv->wait_command_queue);
+
+	/* Keep the restart process from trying to send host
+	 * commands by clearing the INIT status bit */
+	clear_bit(STATUS_READY, &priv->status);
+
+	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
+			  "Restarting adapter due to uCode error.\n");
+
+		if (iwl_is_associated(priv)) {
+			memcpy(&priv->recovery_rxon, &priv->active_rxon,
+			       sizeof(priv->recovery_rxon));
+			priv->error_recovering = 1;
+		}
+		if (priv->cfg->mod_params->restart_fw)
+			queue_work(priv->workqueue, &priv->restart);
+	}
+}
+EXPORT_SYMBOL(iwl_irq_handle_error);
+
+void iwl_configure_filter(struct ieee80211_hw *hw,
+			  unsigned int changed_flags,
+			  unsigned int *total_flags,
+			  int mc_count, struct dev_addr_list *mc_list)
+{
+	struct iwl_priv *priv = hw->priv;
+	__le32 *filter_flags = &priv->staging_rxon.filter_flags;
+
+	IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
+			changed_flags, *total_flags);
+
+	if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) {
+		if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS))
+			*filter_flags |= RXON_FILTER_PROMISC_MSK;
+		else
+			*filter_flags &= ~RXON_FILTER_PROMISC_MSK;
+	}
+	if (changed_flags & FIF_ALLMULTI) {
+		if (*total_flags & FIF_ALLMULTI)
+			*filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK;
+		else
+			*filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK;
+	}
+	if (changed_flags & FIF_CONTROL) {
+		if (*total_flags & FIF_CONTROL)
+			*filter_flags |= RXON_FILTER_CTL2HOST_MSK;
+		else
+			*filter_flags &= ~RXON_FILTER_CTL2HOST_MSK;
+	}
+	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+			*filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
+		else
+			*filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK;
+	}
+
+	/* We avoid iwl_commit_rxon here to commit the new filter flags
+	 * since mac80211 will call ieee80211_hw_config immediately.
+	 * (mc_list is not supported at this time). Otherwise, we need to
+	 * queue a background iwl_commit_rxon work.
+	 */
+
+	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+EXPORT_SYMBOL(iwl_configure_filter);
+
 int iwl_setup_mac(struct iwl_priv *priv)
 {
 	int ret;
@@ -921,8 +1355,8 @@
 	priv->qos_data.qos_cap.val = 0;
 
 	priv->rates_mask = IWL_RATES_MASK;
-	/* If power management is turned on, default to AC mode */
-	priv->power_mode = IWL_POWER_AC;
+	/* If power management is turned on, default to CAM mode */
+	priv->power_mode = IWL_POWER_MODE_CAM;
 	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
 
 	ret = iwl_init_channel_map(priv);
@@ -995,13 +1429,13 @@
 	 * from uCode or flow handler (Rx/Tx DMA) */
 	iwl_write32(priv, CSR_INT, 0xffffffff);
 	iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
-	IWL_DEBUG_ISR("Disabled interrupts\n");
+	IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
 }
 EXPORT_SYMBOL(iwl_disable_interrupts);
 
 void iwl_enable_interrupts(struct iwl_priv *priv)
 {
-	IWL_DEBUG_ISR("Enabling interrupts\n");
+	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
 	set_bit(STATUS_INT_ENABLED, &priv->status);
 	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
 }
@@ -1047,7 +1481,7 @@
 	u32 errcnt = 0;
 	u32 i;
 
-	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
 	ret = iwl_grab_nic_access(priv);
 	if (ret)
@@ -1085,7 +1519,7 @@
 	int ret = 0;
 	u32 errcnt;
 
-	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
 	ret = iwl_grab_nic_access(priv);
 	if (ret)
@@ -1114,8 +1548,8 @@
 	iwl_release_nic_access(priv);
 
 	if (!errcnt)
-		IWL_DEBUG_INFO
-		    ("ucode image in INSTRUCTION memory is good\n");
+		IWL_DEBUG_INFO(priv,
+		    "ucode image in INSTRUCTION memory is good\n");
 
 	return ret;
 }
@@ -1135,7 +1569,7 @@
 	len = priv->ucode_boot.len;
 	ret = iwlcore_verify_inst_sparse(priv, image, len);
 	if (!ret) {
-		IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -1144,7 +1578,7 @@
 	len = priv->ucode_init.len;
 	ret = iwlcore_verify_inst_sparse(priv, image, len);
 	if (!ret) {
-		IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -1153,7 +1587,7 @@
 	len = priv->ucode_code.len;
 	ret = iwlcore_verify_inst_sparse(priv, image, len);
 	if (!ret) {
-		IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -1393,7 +1827,7 @@
 	if (ret)
 		IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
 	else
-		IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
+		IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD succeeded, "
 			"critical temperature is %d\n",
 			cmd.critical_temperature_R);
 }
@@ -1430,7 +1864,7 @@
 	if (test_bit(STATUS_RF_KILL_SW, &priv->status))
 		return;
 
-	IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
+	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO OFF\n");
 
 	iwl_scan_cancel(priv);
 	/* FIXME: This is a workaround for AP */
@@ -1459,7 +1893,7 @@
 	if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
 		return 0;
 
-	IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
+	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO ON\n");
 
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
@@ -1484,7 +1918,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_RF_KILL("Can not turn radio back on - "
+		IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
 				  "disabled by HW switch\n");
 		return 0;
 	}
@@ -1519,7 +1953,7 @@
 	mutex_lock(&priv->mutex);
 
 	if (!iwl_is_rfkill(priv)) {
-		IWL_DEBUG(IWL_DL_RF_KILL,
+		IWL_DEBUG_RF_KILL(priv,
 			  "HW and/or SW RF Kill no longer active, restarting "
 			  "device\n");
 		if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
@@ -1531,7 +1965,7 @@
 			ieee80211_stop_queues(priv->hw);
 
 		if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
-			IWL_DEBUG_RF_KILL("Can not turn radio back on - "
+			IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
 					  "disabled by SW switch\n");
 		else
 			IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 3c6a4b0..d79912b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -211,6 +211,9 @@
 	u16  eeprom_calib_ver;
 	const struct iwl_ops *ops;
 	const struct iwl_mod_params *mod_params;
+	u8   valid_tx_ant;
+	u8   valid_rx_ant;
+	bool need_pll_cfg;
 };
 
 /***************************
@@ -221,11 +224,25 @@
 		struct ieee80211_ops *hw_ops);
 void iwl_hw_detect(struct iwl_priv *priv);
 void iwl_reset_qos(struct iwl_priv *priv);
+void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt);
+int iwl_check_rxon_cmd(struct iwl_priv *priv);
+int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
 u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);
+void iwl_set_flags_for_band(struct iwl_priv *priv, enum ieee80211_band band);
+void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode);
+int iwl_set_decrypted_flag(struct iwl_priv *priv,
+			   struct ieee80211_hdr *hdr,
+			   u32 decrypt_res,
+			   struct ieee80211_rx_status *stats);
+void iwl_irq_handle_error(struct iwl_priv *priv);
+void iwl_configure_filter(struct ieee80211_hw *hw,
+			  unsigned int changed_flags,
+			  unsigned int *total_flags,
+			  int mc_count, struct dev_addr_list *mc_list);
 int iwl_hw_nic_init(struct iwl_priv *priv);
 int iwl_setup_mac(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
@@ -253,6 +270,7 @@
 			       struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb);
+void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 
 /* TX helpers */
 
@@ -296,6 +314,10 @@
 			      struct ieee80211_tx_info *info);
 int iwl_hwrate_to_plcp_idx(u32 rate_n_flags);
 
+u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv);
+
+void iwl_set_rate(struct iwl_priv *priv);
+
 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx);
 
 static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
@@ -343,8 +365,8 @@
  * time if it's a quiet channel (nothing responded to our probe, and there's
  * no other traffic).
  * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(10)  /* msec */
-#define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)  /* packets */
+#define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
+#define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */
 
 
 /*******************************************************************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 74d3d43..5028c78 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -211,6 +211,9 @@
 #define CSR_HW_REV_TYPE_5350           (0x0000030)
 #define CSR_HW_REV_TYPE_5100           (0x0000050)
 #define CSR_HW_REV_TYPE_5150           (0x0000040)
+#define CSR_HW_REV_TYPE_100            (0x0000060)
+#define CSR_HW_REV_TYPE_6x00           (0x0000070)
+#define CSR_HW_REV_TYPE_6x50           (0x0000080)
 #define CSR_HW_REV_TYPE_NONE           (0x00000F0)
 
 /* EEPROM REG */
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 7192d32..65d1a7f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -37,18 +37,20 @@
 #define IWL_CRIT(p, f, a...) dev_crit(&((p)->pci_dev->dev), f, ## a)
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-#define IWL_DEBUG(level, fmt, args...)					    \
-do {									    \
-	if (priv->debug_level & (level))				    \
-		dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-			   in_interrupt() ? 'I' : 'U', __func__ , ## args); \
+#define IWL_DEBUG(__priv, level, fmt, args...)				\
+do {									\
+	if (__priv->debug_level & (level))				\
+		dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev),		\
+			 "%c %s " fmt, in_interrupt() ? 'I' : 'U',	\
+			__func__ , ## args);				\
 } while (0)
 
-#define IWL_DEBUG_LIMIT(level, fmt, args...)				    \
-do {									    \
-	if ((priv->debug_level & (level)) && net_ratelimit())		    \
-		dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-			   in_interrupt() ? 'I' : 'U', __func__ , ## args); \
+#define IWL_DEBUG_LIMIT(__priv, level, fmt, args...)			\
+do {									\
+	if ((__priv->debug_level & (level)) && net_ratelimit())		\
+		dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev),		\
+			"%c %s " fmt, in_interrupt() ? 'I' : 'U',	\
+			 __func__ , ## args);				\
 } while (0)
 
 #define iwl_print_hex_dump(priv, level, p, len) 			\
@@ -88,8 +90,8 @@
 #endif
 
 #else
-#define IWL_DEBUG(level, fmt, args...)
-#define IWL_DEBUG_LIMIT(level, fmt, args...)
+#define IWL_DEBUG(__priv, level, fmt, args...)
+#define IWL_DEBUG_LIMIT(__priv, level, fmt, args...)
 static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level,
 				      void *p, u32 len)
 {}
@@ -169,42 +171,45 @@
 #define IWL_DL_TX_REPLY		(1 << 30)
 #define IWL_DL_QOS		(1 << 31)
 
-#define IWL_DEBUG_INFO(f, a...)		IWL_DEBUG(IWL_DL_INFO, f, ## a)
-#define IWL_DEBUG_MAC80211(f, a...)	IWL_DEBUG(IWL_DL_MAC80211, f, ## a)
-#define IWL_DEBUG_MACDUMP(f, a...)	IWL_DEBUG(IWL_DL_MACDUMP, f, ## a)
-#define IWL_DEBUG_TEMP(f, a...)		IWL_DEBUG(IWL_DL_TEMP, f, ## a)
-#define IWL_DEBUG_SCAN(f, a...)		IWL_DEBUG(IWL_DL_SCAN, f, ## a)
-#define IWL_DEBUG_RX(f, a...)		IWL_DEBUG(IWL_DL_RX, f, ## a)
-#define IWL_DEBUG_TX(f, a...)		IWL_DEBUG(IWL_DL_TX, f, ## a)
-#define IWL_DEBUG_ISR(f, a...)		IWL_DEBUG(IWL_DL_ISR, f, ## a)
-#define IWL_DEBUG_LED(f, a...)		IWL_DEBUG(IWL_DL_LED, f, ## a)
-#define IWL_DEBUG_WEP(f, a...)		IWL_DEBUG(IWL_DL_WEP, f, ## a)
-#define IWL_DEBUG_HC(f, a...)		IWL_DEBUG(IWL_DL_HCMD, f, ## a)
-#define IWL_DEBUG_HC_DUMP(f, a...)	IWL_DEBUG(IWL_DL_HCMD_DUMP, f, ## a)
-#define IWL_DEBUG_CALIB(f, a...)	IWL_DEBUG(IWL_DL_CALIB, f, ## a)
-#define IWL_DEBUG_FW(f, a...)		IWL_DEBUG(IWL_DL_FW, f, ## a)
-#define IWL_DEBUG_RF_KILL(f, a...)	IWL_DEBUG(IWL_DL_RF_KILL, f, ## a)
-#define IWL_DEBUG_DROP(f, a...)		IWL_DEBUG(IWL_DL_DROP, f, ## a)
-#define IWL_DEBUG_DROP_LIMIT(f, a...)	IWL_DEBUG_LIMIT(IWL_DL_DROP, f, ## a)
-#define IWL_DEBUG_AP(f, a...)		IWL_DEBUG(IWL_DL_AP, f, ## a)
-#define IWL_DEBUG_TXPOWER(f, a...)	IWL_DEBUG(IWL_DL_TXPOWER, f, ## a)
-#define IWL_DEBUG_IO(f, a...)		IWL_DEBUG(IWL_DL_IO, f, ## a)
-#define IWL_DEBUG_RATE(f, a...)		IWL_DEBUG(IWL_DL_RATE, f, ## a)
-#define IWL_DEBUG_RATE_LIMIT(f, a...)	IWL_DEBUG_LIMIT(IWL_DL_RATE, f, ## a)
-#define IWL_DEBUG_NOTIF(f, a...)	IWL_DEBUG(IWL_DL_NOTIF, f, ## a)
-#define IWL_DEBUG_ASSOC(f, a...)	\
-		IWL_DEBUG(IWL_DL_ASSOC | IWL_DL_INFO, f, ## a)
-#define IWL_DEBUG_ASSOC_LIMIT(f, a...)	\
-		IWL_DEBUG_LIMIT(IWL_DL_ASSOC | IWL_DL_INFO, f, ## a)
-#define IWL_DEBUG_HT(f, a...)		IWL_DEBUG(IWL_DL_HT, f, ## a)
-#define IWL_DEBUG_STATS(f, a...)	IWL_DEBUG(IWL_DL_STATS, f, ## a)
-#define IWL_DEBUG_STATS_LIMIT(f, a...)	IWL_DEBUG_LIMIT(IWL_DL_STATS, f, ## a)
-#define IWL_DEBUG_TX_REPLY(f, a...)	IWL_DEBUG(IWL_DL_TX_REPLY, f, ## a)
-#define IWL_DEBUG_TX_REPLY_LIMIT(f, a...) \
-		IWL_DEBUG_LIMIT(IWL_DL_TX_REPLY, f, ## a)
-#define IWL_DEBUG_QOS(f, a...)		IWL_DEBUG(IWL_DL_QOS, f, ## a)
-#define IWL_DEBUG_RADIO(f, a...)	IWL_DEBUG(IWL_DL_RADIO, f, ## a)
-#define IWL_DEBUG_POWER(f, a...)	IWL_DEBUG(IWL_DL_POWER, f, ## a)
-#define IWL_DEBUG_11H(f, a...)		IWL_DEBUG(IWL_DL_11H, f, ## a)
+#define IWL_DEBUG_INFO(p, f, a...)	IWL_DEBUG(p, IWL_DL_INFO, f, ## a)
+#define IWL_DEBUG_MAC80211(p, f, a...)	IWL_DEBUG(p, IWL_DL_MAC80211, f, ## a)
+#define IWL_DEBUG_MACDUMP(p, f, a...)	IWL_DEBUG(p, IWL_DL_MACDUMP, f, ## a)
+#define IWL_DEBUG_TEMP(p, f, a...)	IWL_DEBUG(p, IWL_DL_TEMP, f, ## a)
+#define IWL_DEBUG_SCAN(p, f, a...)	IWL_DEBUG(p, IWL_DL_SCAN, f, ## a)
+#define IWL_DEBUG_RX(p, f, a...)	IWL_DEBUG(p, IWL_DL_RX, f, ## a)
+#define IWL_DEBUG_TX(p, f, a...)	IWL_DEBUG(p, IWL_DL_TX, f, ## a)
+#define IWL_DEBUG_ISR(p, f, a...)	IWL_DEBUG(p, IWL_DL_ISR, f, ## a)
+#define IWL_DEBUG_LED(p, f, a...)	IWL_DEBUG(p, IWL_DL_LED, f, ## a)
+#define IWL_DEBUG_WEP(p, f, a...)	IWL_DEBUG(p, IWL_DL_WEP, f, ## a)
+#define IWL_DEBUG_HC(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD, f, ## a)
+#define IWL_DEBUG_HC_DUMP(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD_DUMP, f, ## a)
+#define IWL_DEBUG_CALIB(p, f, a...)	IWL_DEBUG(p, IWL_DL_CALIB, f, ## a)
+#define IWL_DEBUG_FW(p, f, a...)	IWL_DEBUG(p, IWL_DL_FW, f, ## a)
+#define IWL_DEBUG_RF_KILL(p, f, a...)	IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a)
+#define IWL_DEBUG_DROP(p, f, a...)	IWL_DEBUG(p, IWL_DL_DROP, f, ## a)
+#define IWL_DEBUG_DROP_LIMIT(p, f, a...)	\
+		IWL_DEBUG_LIMIT(p, IWL_DL_DROP, f, ## a)
+#define IWL_DEBUG_AP(p, f, a...)	IWL_DEBUG(p, IWL_DL_AP, f, ## a)
+#define IWL_DEBUG_TXPOWER(p, f, a...)	IWL_DEBUG(p, IWL_DL_TXPOWER, f, ## a)
+#define IWL_DEBUG_IO(p, f, a...)	IWL_DEBUG(p, IWL_DL_IO, f, ## a)
+#define IWL_DEBUG_RATE(p, f, a...)	IWL_DEBUG(p, IWL_DL_RATE, f, ## a)
+#define IWL_DEBUG_RATE_LIMIT(p, f, a...)	\
+		IWL_DEBUG_LIMIT(p, IWL_DL_RATE, f, ## a)
+#define IWL_DEBUG_NOTIF(p, f, a...)	IWL_DEBUG(p, IWL_DL_NOTIF, f, ## a)
+#define IWL_DEBUG_ASSOC(p, f, a...)	\
+		IWL_DEBUG(p, IWL_DL_ASSOC | IWL_DL_INFO, f, ## a)
+#define IWL_DEBUG_ASSOC_LIMIT(p, f, a...)	\
+		IWL_DEBUG_LIMIT(p, IWL_DL_ASSOC | IWL_DL_INFO, f, ## a)
+#define IWL_DEBUG_HT(p, f, a...)	IWL_DEBUG(p, IWL_DL_HT, f, ## a)
+#define IWL_DEBUG_STATS(p, f, a...)	IWL_DEBUG(p, IWL_DL_STATS, f, ## a)
+#define IWL_DEBUG_STATS_LIMIT(p, f, a...)	\
+		IWL_DEBUG_LIMIT(p, IWL_DL_STATS, f, ## a)
+#define IWL_DEBUG_TX_REPLY(p, f, a...)	IWL_DEBUG(p, IWL_DL_TX_REPLY, f, ## a)
+#define IWL_DEBUG_TX_REPLY_LIMIT(p, f, a...) \
+		IWL_DEBUG_LIMIT(p, IWL_DL_TX_REPLY, f, ## a)
+#define IWL_DEBUG_QOS(p, f, a...)	IWL_DEBUG(p, IWL_DL_QOS, f, ## a)
+#define IWL_DEBUG_RADIO(p, f, a...)	IWL_DEBUG(p, IWL_DL_RADIO, f, ## a)
+#define IWL_DEBUG_POWER(p, f, a...)	IWL_DEBUG(p, IWL_DL_POWER, f, ## a)
+#define IWL_DEBUG_11H(p, f, a...)	IWL_DEBUG(p, IWL_DL_11H, f, ## a)
 
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 437c05b..afde713 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -67,6 +67,18 @@
 /* shared structures from iwl-5000.c */
 extern struct iwl_mod_params iwl50_mod_params;
 extern struct iwl_ops iwl5000_ops;
+extern struct iwl_lib_ops iwl5000_lib;
+extern struct iwl_hcmd_ops iwl5000_hcmd;
+extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
+
+/* shared functions from iwl-5000.c */
+extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
+extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
+				     u8 *data);
+extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+				    __le32 *tx_flags);
+extern int iwl5000_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp);
 
 /* CT-KILL constants */
 #define CT_KILL_THRESHOLD	110 /* in Celsius */
@@ -1078,13 +1090,6 @@
 
 	/*For 3945*/
 #define IWL_DEFAULT_TX_POWER 0x0F
-	/* We declare this const so it can only be
-	 * changed via explicit cast within the
-	 * routines that actually update the physical
-	 * hardware */
-	const struct iwl3945_rxon_cmd active39_rxon;
-	struct iwl3945_rxon_cmd staging39_rxon;
-	struct iwl3945_rxon_cmd recovery39_rxon;
 
 	struct iwl3945_notif_statistics statistics_39;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index eaa658f..d1d1d9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -173,7 +173,7 @@
 				CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 				EEPROM_SEM_TIMEOUT);
 		if (ret >= 0) {
-			IWL_DEBUG_IO("Acquired semaphore after %d tries.\n",
+			IWL_DEBUG_IO(priv, "Acquired semaphore after %d tries.\n",
 				count+1);
 			return ret;
 		}
@@ -390,7 +390,7 @@
 	if (!is_channel_valid(ch_info))
 		return -1;
 
-	IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+	IWL_DEBUG_INFO(priv, "FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
 			" Ad-Hoc %ssupported\n",
 			ch_info->channel,
 			is_channel_a_band(ch_info) ?
@@ -432,11 +432,11 @@
 	struct iwl_channel_info *ch_info;
 
 	if (priv->channel_count) {
-		IWL_DEBUG_INFO("Channel map already initialized.\n");
+		IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
 		return 0;
 	}
 
-	IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
+	IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");
 
 	priv->channel_count =
 	    ARRAY_SIZE(iwl_eeprom_band_1) +
@@ -445,7 +445,7 @@
 	    ARRAY_SIZE(iwl_eeprom_band_4) +
 	    ARRAY_SIZE(iwl_eeprom_band_5);
 
-	IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
+	IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);
 
 	priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
 				     priv->channel_count, GFP_KERNEL);
@@ -485,7 +485,7 @@
 				 IEEE80211_CHAN_NO_FAT_BELOW);
 
 			if (!(is_channel_valid(ch_info))) {
-				IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
+				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
 					       "No traffic\n",
 					       ch_info->channel,
 					       ch_info->flags,
@@ -501,7 +501,7 @@
 			ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
 			ch_info->min_power = 0;
 
-			IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
+			IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
 				       " Ad-Hoc %ssupported\n",
 				       ch_info->channel,
 				       is_channel_a_band(ch_info) ?
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 65ae2af..17d61ac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -125,11 +125,11 @@
 	switch (cmd->hdr.cmd) {
 	case REPLY_TX_LINK_QUALITY_CMD:
 	case SENSITIVITY_CMD:
-		IWL_DEBUG_HC_DUMP("back from %s (0x%08X)\n",
+		IWL_DEBUG_HC_DUMP(priv, "back from %s (0x%08X)\n",
 				get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
 				break;
 	default:
-		IWL_DEBUG_HC("back from %s (0x%08X)\n",
+		IWL_DEBUG_HC(priv, "back from %s (0x%08X)\n",
 				get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
 	}
 #endif
@@ -211,13 +211,13 @@
 	}
 
 	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
+		IWL_DEBUG_INFO(priv, "Command %s aborted: RF KILL Switch\n",
 			       get_cmd_string(cmd->id));
 		ret = -ECANCELED;
 		goto fail;
 	}
 	if (test_bit(STATUS_FW_ERROR, &priv->status)) {
-		IWL_DEBUG_INFO("Command %s failed: FW Error\n",
+		IWL_DEBUG_INFO(priv, "Command %s failed: FW Error\n",
 			       get_cmd_string(cmd->id));
 		ret = -EIO;
 		goto fail;
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 7341a2d..c7b8e5b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -66,7 +66,7 @@
 static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
 				 u32 ofs, u32 val)
 {
-	IWL_DEBUG_IO("write32(0x%08X, 0x%08X) - %s %d\n", ofs, val, f, l);
+	IWL_DEBUG_IO(priv, "write32(0x%08X, 0x%08X) - %s %d\n", ofs, val, f, l);
 	_iwl_write32(priv, ofs, val);
 }
 #define iwl_write32(priv, ofs, val) \
@@ -79,7 +79,7 @@
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
 {
-	IWL_DEBUG_IO("read_direct32(0x%08X) - %s %d\n", ofs, f, l);
+	IWL_DEBUG_IO(priv, "read_direct32(0x%08X) - %s %d\n", ofs, f, l);
 	return _iwl_read32(priv, ofs);
 }
 #define iwl_read32(priv, ofs) __iwl_read32(__FILE__, __LINE__, priv, ofs)
@@ -108,7 +108,7 @@
 				 u32 bits, u32 mask, int timeout)
 {
 	int ret = _iwl_poll_bit(priv, addr, bits, mask, timeout);
-	IWL_DEBUG_IO("poll_bit(0x%08X, 0x%08X, 0x%08X) - %s- %s %d\n",
+	IWL_DEBUG_IO(priv, "poll_bit(0x%08X, 0x%08X, 0x%08X) - %s- %s %d\n",
 		     addr, bits, mask,
 		     unlikely(ret  == -ETIMEDOUT) ? "timeout" : "", f, l);
 	return ret;
@@ -128,7 +128,7 @@
 				 struct iwl_priv *priv, u32 reg, u32 mask)
 {
 	u32 val = _iwl_read32(priv, reg) | mask;
-	IWL_DEBUG_IO("set_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
+	IWL_DEBUG_IO(priv, "set_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
 #define iwl_set_bit(p, r, m) __iwl_set_bit(__FILE__, __LINE__, p, r, m)
@@ -145,7 +145,7 @@
 				   struct iwl_priv *priv, u32 reg, u32 mask)
 {
 	u32 val = _iwl_read32(priv, reg) & ~mask;
-	IWL_DEBUG_IO("clear_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
+	IWL_DEBUG_IO(priv, "clear_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
 #define iwl_clear_bit(p, r, m) __iwl_clear_bit(__FILE__, __LINE__, p, r, m)
@@ -184,7 +184,7 @@
 	if (atomic_read(&priv->restrict_refcnt))
 		IWL_ERR(priv, "Grabbing access while already held %s %d.\n", f, l);
 
-	IWL_DEBUG_IO("grabbing nic access - %s %d\n", f, l);
+	IWL_DEBUG_IO(priv, "grabbing nic access - %s %d\n", f, l);
 	return _iwl_grab_nic_access(priv);
 }
 #define iwl_grab_nic_access(priv) \
@@ -209,7 +209,7 @@
 	if (atomic_read(&priv->restrict_refcnt) <= 0)
 		IWL_ERR(priv, "Release unheld nic access at line %s %d.\n", f, l);
 
-	IWL_DEBUG_IO("releasing nic access - %s %d\n", f, l);
+	IWL_DEBUG_IO(priv, "releasing nic access - %s %d\n", f, l);
 	_iwl_release_nic_access(priv);
 }
 #define iwl_release_nic_access(priv) \
@@ -230,7 +230,7 @@
 	u32 value = _iwl_read_direct32(priv, reg);
 	if (!atomic_read(&priv->restrict_refcnt))
 		IWL_ERR(priv, "Nic access not held from %s %d\n", f, l);
-	IWL_DEBUG_IO("read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
+	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
 		     f, l);
 	return value;
 }
@@ -284,10 +284,10 @@
 	int ret  = _iwl_poll_direct_bit(priv, addr, mask, timeout);
 
 	if (unlikely(ret == -ETIMEDOUT))
-		IWL_DEBUG_IO("poll_direct_bit(0x%08X, 0x%08X) - "
+		IWL_DEBUG_IO(priv, "poll_direct_bit(0x%08X, 0x%08X) - "
 			     "timedout - %s %d\n", addr, mask, f, l);
 	else
-		IWL_DEBUG_IO("poll_direct_bit(0x%08X, 0x%08X) = 0x%08X "
+		IWL_DEBUG_IO(priv, "poll_direct_bit(0x%08X, 0x%08X) = 0x%08X "
 			     "- %s %d\n", addr, mask, ret, f, l);
 	return ret;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 501cffe..19680f7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -123,7 +123,7 @@
 /* Set led register off */
 static int iwl4965_led_on_reg(struct iwl_priv *priv, int led_id)
 {
-	IWL_DEBUG_LED("led on %d\n", led_id);
+	IWL_DEBUG_LED(priv, "led on %d\n", led_id);
 	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
 	return 0;
 }
@@ -150,7 +150,7 @@
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	IWL_DEBUG_LED("led off %d\n", led_id);
+	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
 	return iwl_send_led_cmd(priv, &led_cmd);
 }
 #endif
@@ -159,7 +159,7 @@
 /* Set led register off */
 static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id)
 {
-	IWL_DEBUG_LED("LED Reg off\n");
+	IWL_DEBUG_LED(priv, "LED Reg off\n");
 	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
 	return 0;
 }
@@ -169,7 +169,7 @@
  */
 static int iwl_led_associate(struct iwl_priv *priv, int led_id)
 {
-	IWL_DEBUG_LED("Associated\n");
+	IWL_DEBUG_LED(priv, "Associated\n");
 	priv->allow_blinking = 1;
 	return iwl4965_led_on_reg(priv, led_id);
 }
@@ -213,7 +213,7 @@
 		return;
 
 
-	IWL_DEBUG_LED("Led type = %s brightness = %d\n",
+	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
 			led_type_str[led->type], brightness);
 	switch (brightness) {
 	case LED_FULL:
@@ -280,7 +280,7 @@
 	if (tpt < 0) /* wraparound */
 		tpt = -tpt;
 
-	IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+	IWL_DEBUG_LED(priv, "tpt %lld current_tpt %llu\n",
 		(long long)tpt,
 		(unsigned long long)current_tpt);
 	priv->led_tpt = current_tpt;
@@ -292,7 +292,7 @@
 			if (tpt  > (blink_tbl[i].tpt * IWL_1MB_RATE))
 				break;
 
-	IWL_DEBUG_LED("LED BLINK IDX=%d\n", i);
+	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", i);
 	return i;
 }
 
@@ -352,7 +352,7 @@
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
 	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
+		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg;
@@ -366,7 +366,7 @@
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
 	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
+		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC],
@@ -382,7 +382,7 @@
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
 	snprintf(priv->led[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX",
+		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s::RX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX],
@@ -397,7 +397,7 @@
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
 	snprintf(priv->led[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX",
+		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s::TX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX],
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 1d798d0..140fd8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -35,7 +35,7 @@
 
 #define IWL_LED_SOLID 11
 #define IWL_LED_NAME_LEN 31
-#define IWL_DEF_LED_INTRVL __constant_cpu_to_le32(1000)
+#define IWL_DEF_LED_INTRVL cpu_to_le32(1000)
 
 #define IWL_LED_ACTIVITY       (0<<1)
 #define IWL_LED_LINK           (1<<1)
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index a463459..4c5a775 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -102,6 +102,7 @@
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
 };
 
+
 /* set card power command */
 static int iwl_set_power(struct iwl_priv *priv, void *cmd)
 {
@@ -126,13 +127,6 @@
 		else
 			mode = IWL_POWER_ON_AC_DISASSOC;
 		break;
-	/* FIXME: remove battery and ac from here */
-	case IWL_POWER_BATTERY:
-		mode = IWL_POWER_INDEX_3;
-		break;
-	case IWL_POWER_AC:
-		mode = IWL_POWER_MODE_CAM;
-		break;
 	default:
 		mode = priv->power_data.user_power_setting;
 		break;
@@ -149,7 +143,7 @@
 	int i;
 	u16 pci_pm;
 
-	IWL_DEBUG_POWER("Initialize power \n");
+	IWL_DEBUG_POWER(priv, "Initialize power \n");
 
 	pow_data = &priv->power_data;
 
@@ -161,7 +155,7 @@
 
 	pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm);
 
-	IWL_DEBUG_POWER("adjust power command flags\n");
+	IWL_DEBUG_POWER(priv, "adjust power command flags\n");
 
 	for (i = 0; i < IWL_POWER_MAX; i++) {
 		cmd = &pow_data->pwr_range_0[i].cmd;
@@ -185,7 +179,7 @@
 	bool skip;
 
 	if (mode > IWL_POWER_INDEX_5) {
-		IWL_DEBUG_POWER("Error invalid power mode \n");
+		IWL_DEBUG_POWER(priv, "Error invalid power mode \n");
 		return -EINVAL;
 	}
 
@@ -225,10 +219,10 @@
 		if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
 			cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
 
-	IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
-	IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
-	IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
-	IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
+	IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
+	IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
+	IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
+	IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
 			le32_to_cpu(cmd->sleep_interval[0]),
 			le32_to_cpu(cmd->sleep_interval[1]),
 			le32_to_cpu(cmd->sleep_interval[2]),
@@ -302,7 +296,7 @@
 		if (priv->cfg->ops->lib->update_chain_flags && update_chains)
 			priv->cfg->ops->lib->update_chain_flags(priv);
 		else
-			IWL_DEBUG_POWER("Cannot update the power, chain noise "
+			IWL_DEBUG_POWER(priv, "Cannot update the power, chain noise "
 					"calibration running: %d\n",
 					priv->chain_noise_data.state);
 		if (!ret)
@@ -357,7 +351,7 @@
 /* set user_power_setting */
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
 {
-	if (mode > IWL_POWER_LIMIT)
+	if (mode > IWL_POWER_MAX)
 		return -EINVAL;
 
 	priv->power_data.user_power_setting = mode;
@@ -371,11 +365,10 @@
  */
 int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode)
 {
-	if (mode > IWL_POWER_LIMIT)
+	if (mode < IWL_POWER_SYS_MAX)
+		priv->power_data.system_power_setting = mode;
+	else
 		return -EINVAL;
-
-	priv->power_data.system_power_setting = mode;
-
 	return iwl_power_update_mode(priv, 0);
 }
 EXPORT_SYMBOL(iwl_power_set_system_mode);
@@ -423,7 +416,7 @@
 {
 	struct iwl_priv *priv = container_of(work,
 				struct iwl_priv, set_power_save.work);
-	IWL_DEBUG(IWL_DL_STATE, "update power\n");
+	IWL_DEBUG_POWER(priv, "update power\n");
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 859b60b..1896339 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -42,38 +42,26 @@
 	IWL_POWER_INDEX_5,
 	IWL_POWER_AUTO,
 	IWL_POWER_MAX = IWL_POWER_AUTO,
-	IWL39_POWER_AC = IWL_POWER_AUTO, /* 0x06 */
-	IWL_POWER_AC,
-	IWL39_POWER_BATTERY = IWL_POWER_AC, /* 0x07 */
-	IWL39_POWER_LIMIT = IWL_POWER_AC,
-	IWL_POWER_BATTERY,
 };
 
 enum {
 	IWL_POWER_SYS_AUTO,
 	IWL_POWER_SYS_AC,
 	IWL_POWER_SYS_BATTERY,
+	IWL_POWER_SYS_MAX,
 };
 
-#define IWL_POWER_LIMIT		0x08
-#define IWL_POWER_MASK		0x0F
-#define IWL_POWER_ENABLED	0x10
-
-#define IWL_POWER_RANGE_0  (0)
-#define IWL_POWER_RANGE_1  (1)
-
-#define IWL_POWER_LEVEL(x)	((x) & IWL_POWER_MASK)
 
 /* Power management (not Tx power) structures */
 
-#define NOSLP __constant_cpu_to_le16(0), 0, 0
+#define NOSLP cpu_to_le16(0), 0, 0
 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
-#define SLP_TOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
-#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
-				     __constant_cpu_to_le32(X1), \
-				     __constant_cpu_to_le32(X2), \
-				     __constant_cpu_to_le32(X3), \
-				     __constant_cpu_to_le32(X4)}
+#define SLP_TOUT(T) cpu_to_le32((T) * MSEC_TO_USEC)
+#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
+				     cpu_to_le32(X1), \
+				     cpu_to_le32(X2), \
+				     cpu_to_le32(X3), \
+				     cpu_to_le32(X4)}
 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
index f67d7be..2ad9faf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
@@ -47,7 +47,7 @@
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return 0;
 
-	IWL_DEBUG_RF_KILL("we received soft RFKILL set to state %d\n", state);
+	IWL_DEBUG_RF_KILL(priv, "we received soft RFKILL set to state %d\n", state);
 	mutex_lock(&priv->mutex);
 
 	switch (state) {
@@ -79,7 +79,7 @@
 
 	BUG_ON(device == NULL);
 
-	IWL_DEBUG_RF_KILL("Initializing RFKILL.\n");
+	IWL_DEBUG_RF_KILL(priv, "Initializing RFKILL.\n");
 	priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
 	if (!priv->rfkill) {
 		IWL_ERR(priv, "Unable to allocate RFKILL device.\n");
@@ -102,7 +102,7 @@
 		goto free_rfkill;
 	}
 
-	IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n");
+	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
 	return ret;
 
 free_rfkill:
@@ -111,7 +111,7 @@
 	priv->rfkill = NULL;
 
 error:
-	IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n");
+	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
 	return ret;
 }
 EXPORT_SYMBOL(iwl_rfkill_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 3314520..8f65908 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -494,7 +494,7 @@
 
 	missed_beacon = &pkt->u.missed_beacon;
 	if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) {
-		IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
+		IWL_DEBUG_CALIB(priv, "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
 		    le32_to_cpu(missed_beacon->consequtive_missed_beacons),
 		    le32_to_cpu(missed_beacon->total_missed_becons),
 		    le32_to_cpu(missed_beacon->num_recvd_beacons),
@@ -541,7 +541,7 @@
 	else
 		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
 
-	IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n",
+	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
 			bcn_silence_a, bcn_silence_b, bcn_silence_c,
 			priv->last_rx_noise);
 }
@@ -554,7 +554,7 @@
 	int change;
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
-	IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
+	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics), pkt->len);
 
 	change = ((priv->statistics.general.temperature !=
@@ -741,13 +741,13 @@
 		 * MAC addresses show just the last byte (for brevity),
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
-			IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
 				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, bitrate);
 		else {
 			/* src/dst addresses assume managed mode */
-			IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, src=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
 				     "len=%u, rssi=%d, tim=%lu usec, "
 				     "phy=0x%02x, chnl=%d\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
@@ -772,10 +772,10 @@
 /*
  * returns non-zero if packet should be dropped
  */
-static int iwl_set_decrypted_flag(struct iwl_priv *priv,
-				      struct ieee80211_hdr *hdr,
-				      u32 decrypt_res,
-				      struct ieee80211_rx_status *stats)
+int iwl_set_decrypted_flag(struct iwl_priv *priv,
+			   struct ieee80211_hdr *hdr,
+			   u32 decrypt_res,
+			   struct ieee80211_rx_status *stats)
 {
 	u16 fc = le16_to_cpu(hdr->frame_control);
 
@@ -785,7 +785,7 @@
 	if (!(fc & IEEE80211_FCTL_PROTECTED))
 		return 0;
 
-	IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
+	IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res);
 	switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
 	case RX_RES_STATUS_SEC_TYPE_TKIP:
 		/* The uCode has got a bad phase 1 Key, pushes the packet.
@@ -799,13 +799,13 @@
 		    RX_RES_STATUS_BAD_ICV_MIC) {
 			/* bad ICV, the packet is destroyed since the
 			 * decryption is inplace, drop it */
-			IWL_DEBUG_RX("Packet destroyed\n");
+			IWL_DEBUG_RX(priv, "Packet destroyed\n");
 			return -1;
 		}
 	case RX_RES_STATUS_SEC_TYPE_CCMP:
 		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
 		    RX_RES_STATUS_DECRYPT_OK) {
-			IWL_DEBUG_RX("hw decrypt successfully!!!\n");
+			IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n");
 			stats->flag |= RX_FLAG_DECRYPTED;
 		}
 		break;
@@ -815,6 +815,7 @@
 	}
 	return 0;
 }
+EXPORT_SYMBOL(iwl_set_decrypted_flag);
 
 static u32 iwl_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
 {
@@ -869,7 +870,7 @@
 		break;
 	};
 
-	IWL_DEBUG_RX("decrypt_in:0x%x  decrypt_out = 0x%x\n",
+	IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
 					decrypt_in, decrypt_out);
 
 	return decrypt_out;
@@ -933,8 +934,8 @@
 
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT
-		    ("Dropping packet while interface is not open.\n");
+		IWL_DEBUG_DROP_LIMIT(priv,
+		    "Dropping packet while interface is not open.\n");
 		return;
 	}
 
@@ -1006,7 +1007,7 @@
 	/*rx_status.flag |= RX_FLAG_TSFT;*/
 
 	if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
-		IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
+		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
 				rx_start->cfg_phy_cnt);
 		return;
 	}
@@ -1044,7 +1045,7 @@
 
 	if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) ||
 	    !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n",
+		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
 				le32_to_cpu(*rx_end));
 		return;
 	}
@@ -1077,7 +1078,7 @@
 	if (unlikely(priv->debug_level & IWL_DL_RX))
 		iwl_dbg_report_frame(priv, rx_start, len, header, 1);
 #endif
-	IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
 		rx_status.signal, rx_status.noise, rx_status.signal,
 		(unsigned long long)rx_status.mactime);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index c282d1d..22bad3c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -70,12 +70,12 @@
 
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
 		if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-			IWL_DEBUG_SCAN("Queuing scan abort.\n");
+			IWL_DEBUG_SCAN(priv, "Queuing scan abort.\n");
 			set_bit(STATUS_SCAN_ABORTING, &priv->status);
 			queue_work(priv->workqueue, &priv->abort_scan);
 
 		} else
-			IWL_DEBUG_SCAN("Scan abort already in progress.\n");
+			IWL_DEBUG_SCAN(priv, "Scan abort already in progress.\n");
 
 		return test_bit(STATUS_SCANNING, &priv->status);
 	}
@@ -140,7 +140,7 @@
 		 * can occur if we send the scan abort before we
 		 * the microcode has notified us that a scan is
 		 * completed. */
-		IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
+		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", res->u.status);
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 		clear_bit(STATUS_SCAN_HW, &priv->status);
 	}
@@ -161,7 +161,7 @@
 	struct iwl_scanreq_notification *notif =
 	    (struct iwl_scanreq_notification *)pkt->u.raw;
 
-	IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+	IWL_DEBUG_RX(priv, "Scan request status = 0x%x\n", notif->status);
 #endif
 }
 
@@ -173,7 +173,7 @@
 	struct iwl_scanstart_notification *notif =
 	    (struct iwl_scanstart_notification *)pkt->u.raw;
 	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
-	IWL_DEBUG_SCAN("Scan start: "
+	IWL_DEBUG_SCAN(priv, "Scan start: "
 		       "%d [802.11%s] "
 		       "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
 		       notif->channel,
@@ -192,7 +192,7 @@
 	struct iwl_scanresults_notification *notif =
 	    (struct iwl_scanresults_notification *)pkt->u.raw;
 
-	IWL_DEBUG_SCAN("Scan ch.res: "
+	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
 		       "%d [802.11%s] "
 		       "(TSF: 0x%08X:%08X) - %d "
 		       "elapsed=%lu usec (%dms since last)\n",
@@ -218,7 +218,7 @@
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
-	IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
@@ -230,7 +230,7 @@
 	/* The scan completion notification came in, so kill that timer... */
 	cancel_delayed_work(&priv->scan_check);
 
-	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
+	IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
 		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
 						"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
@@ -248,7 +248,7 @@
 	 * then we reset the scan state machine and terminate,
 	 * re-queuing another scan if one has been requested */
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_INFO("Aborted scan completed.\n");
+		IWL_DEBUG_INFO(priv, "Aborted scan completed.\n");
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 	} else {
 		/* If there are more bands on this scan pass reschedule */
@@ -258,11 +258,11 @@
 
 	priv->last_scan_jiffies = jiffies;
 	priv->next_scan_jiffies = 0;
-	IWL_DEBUG_INFO("Setting scan to off\n");
+	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
 
 	clear_bit(STATUS_SCANNING, &priv->status);
 
-	IWL_DEBUG_INFO("Scan took %dms\n",
+	IWL_DEBUG_INFO(priv, "Scan took %dms\n",
 		jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
 
 	queue_work(priv->workqueue, &priv->scan_completed);
@@ -355,7 +355,7 @@
 
 		ch_info = iwl_get_channel_info(priv, band, channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
+			IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
 					channel);
 			continue;
 		}
@@ -384,7 +384,7 @@
 		else
 			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
 
-		IWL_DEBUG_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n",
+		IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
 			       channel, le32_to_cpu(scan_ch->type),
 			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
 				"ACTIVE" : "PASSIVE",
@@ -395,7 +395,7 @@
 		added++;
 	}
 
-	IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
 	return added;
 }
 
@@ -411,21 +411,21 @@
 int iwl_scan_initiate(struct iwl_priv *priv)
 {
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+		IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
 		return -EIO;
 	}
 
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN("Scan already in progress.\n");
+		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
 		return -EAGAIN;
 	}
 
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN("Scan request while abort pending\n");
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
 		return -EAGAIN;
 	}
 
-	IWL_DEBUG_INFO("Starting scan...\n");
+	IWL_DEBUG_INFO(priv, "Starting scan...\n");
 	if (priv->cfg->sku & IWL_SKU_G)
 		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
 	if (priv->cfg->sku & IWL_SKU_A)
@@ -453,7 +453,7 @@
 	mutex_lock(&priv->mutex);
 	if (test_bit(STATUS_SCANNING, &priv->status) ||
 	    test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
+		IWL_DEBUG_SCAN(priv, "Scan completion watchdog resetting "
 			"adapter (%dms)\n",
 			jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
 
@@ -657,34 +657,34 @@
 	/* This should never be called or scheduled if there is currently
 	 * a scan active in the hardware. */
 	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
-		IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
+		IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
 			       "Ignoring second request.\n");
 		ret = -EIO;
 		goto done;
 	}
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+		IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
 		goto done;
 	}
 
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
+		IWL_DEBUG_HC(priv, "Scan request while abort pending.  Queuing.\n");
 		goto done;
 	}
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+		IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
 		goto done;
 	}
 
 	if (!test_bit(STATUS_READY, &priv->status)) {
-		IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n");
+		IWL_DEBUG_HC(priv, "Scan request while uninitialized.  Queuing.\n");
 		goto done;
 	}
 
 	if (!priv->scan_bands) {
-		IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+		IWL_DEBUG_HC(priv, "Aborting scan due to no requested bands\n");
 		goto done;
 	}
 
@@ -709,7 +709,7 @@
 		u32 scan_suspend_time = 100;
 		unsigned long flags;
 
-		IWL_DEBUG_INFO("Scanning while associated...\n");
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
 
 		spin_lock_irqsave(&priv->lock, flags);
 		interval = priv->beacon_int;
@@ -724,13 +724,13 @@
 		scan_suspend_time = (extra |
 		    ((suspend_time % interval) * 1024));
 		scan->suspend_time = cpu_to_le32(scan_suspend_time);
-		IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
 			       scan_suspend_time, interval);
 	}
 
 	/* We should add the ability for user to lock to PASSIVE ONLY */
 	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
+		IWL_DEBUG_SCAN(priv, "Start direct scan for '%s'\n",
 				print_ssid(ssid, priv->direct_ssid,
 					   priv->direct_ssid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
@@ -739,7 +739,7 @@
 		       priv->direct_ssid, priv->direct_ssid_len);
 		n_probes++;
 	} else {
-		IWL_DEBUG_SCAN("Start indirect scan.\n");
+		IWL_DEBUG_SCAN(priv, "Start indirect scan.\n");
 	}
 
 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
@@ -801,7 +801,7 @@
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
-		IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
 		goto done;
 	}
 
@@ -855,7 +855,7 @@
 	struct iwl_priv *priv =
 	    container_of(work, struct iwl_priv, scan_completed);
 
-	IWL_DEBUG_SCAN("SCAN complete scan\n");
+	IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.c b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
index aba1ef2..022bcf1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.c
+++ b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
@@ -154,9 +154,9 @@
 	switch (spectrum_resp_status) {
 	case 0:		/* Command will be handled */
 		if (res->u.spectrum.id != 0xff) {
-			IWL_DEBUG_INFO
-			    ("Replaced existing measurement: %d\n",
-			     res->u.spectrum.id);
+			IWL_DEBUG_INFO(priv,
+				"Replaced existing measurement: %d\n",
+				res->u.spectrum.id);
 			priv->measurement_status &= ~MEASUREMENT_READY;
 		}
 		priv->measurement_status |= MEASUREMENT_ACTIVE;
@@ -181,7 +181,7 @@
 	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
 
 	if (!report->state) {
-		IWL_DEBUG(IWL_DL_11H,
+		IWL_DEBUG_11H(priv,
 			"Spectrum Measure Notification: Start\n");
 		return;
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 20dc841..1fae3a6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -60,7 +60,7 @@
 			goto out;
 		}
 
-	IWL_DEBUG_ASSOC_LIMIT("can not find STA %pM total %d\n",
+	IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n",
 			      addr, priv->num_stations);
 
  out:
@@ -92,7 +92,7 @@
 			sta_id);
 
 	priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE;
-	IWL_DEBUG_ASSOC("Added STA to Ucode: %pM\n",
+	IWL_DEBUG_ASSOC(priv, "Added STA to Ucode: %pM\n",
 			priv->stations[sta_id].sta.sta.addr);
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
@@ -123,7 +123,7 @@
 		iwl_sta_ucode_activate(priv, sta_id);
 		 /* fall through */
 	default:
-		IWL_DEBUG_HC("Received REPLY_ADD_STA:(0x%08X)\n",
+		IWL_DEBUG_HC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
 			     res->u.add_sta.status);
 		break;
 	}
@@ -166,7 +166,7 @@
 		switch (res->u.add_sta.status) {
 		case ADD_STA_SUCCESS_MSK:
 			iwl_sta_ucode_activate(priv, sta->sta.sta_id);
-			IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
+			IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
 			break;
 		default:
 			ret = -EIO;
@@ -272,7 +272,7 @@
 
 	station = &priv->stations[sta_id];
 	station->used = IWL_STA_DRIVER_ACTIVE;
-	IWL_DEBUG_ASSOC("Add STA to driver ID %d: %pM\n",
+	IWL_DEBUG_ASSOC(priv, "Add STA to driver ID %d: %pM\n",
 			sta_id, addr);
 	priv->num_stations++;
 
@@ -304,7 +304,7 @@
 
 	BUG_ON(sta_id == IWL_INVALID_STATION);
 
-	IWL_DEBUG_ASSOC("Removed STA from Ucode: %pM\n", addr);
+	IWL_DEBUG_ASSOC(priv, "Removed STA from Ucode: %pM\n", addr);
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 
@@ -390,7 +390,7 @@
 		switch (res->u.rem_sta.status) {
 		case REM_STA_SUCCESS_MSK:
 			iwl_sta_ucode_deactivate(priv, addr);
-			IWL_DEBUG_ASSOC("REPLY_REMOVE_STA PASSED\n");
+			IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
 			break;
 		default:
 			ret = -EIO;
@@ -432,7 +432,7 @@
 	if (unlikely(sta_id == IWL_INVALID_STATION))
 		goto out;
 
-	IWL_DEBUG_ASSOC("Removing STA from driver:%d  %pM\n",
+	IWL_DEBUG_ASSOC(priv, "Removing STA from driver:%d  %pM\n",
 		sta_id, addr);
 
 	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
@@ -560,7 +560,7 @@
 	priv->default_wep_key--;
 	memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
 	ret = iwl_send_static_wepkey_cmd(priv, 1);
-	IWL_DEBUG_WEP("Remove default WEP key: idx=%d ret=%d\n",
+	IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
 		      keyconf->keyidx, ret);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
@@ -576,7 +576,7 @@
 
 	if (keyconf->keylen != WEP_KEY_LEN_128 &&
 	    keyconf->keylen != WEP_KEY_LEN_64) {
-		IWL_DEBUG_WEP("Bad WEP key length %d\n", keyconf->keylen);
+		IWL_DEBUG_WEP(priv, "Bad WEP key length %d\n", keyconf->keylen);
 		return -EINVAL;
 	}
 
@@ -596,7 +596,7 @@
 							keyconf->keylen);
 
 	ret = iwl_send_static_wepkey_cmd(priv, 0);
-	IWL_DEBUG_WEP("Set default WEP key: len=%d idx=%d ret=%d\n",
+	IWL_DEBUG_WEP(priv, "Set default WEP key: len=%d idx=%d ret=%d\n",
 		keyconf->keylen, keyconf->keyidx, ret);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
@@ -752,7 +752,7 @@
 
 	sta_id = iwl_find_station(priv, addr);
 	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_MAC80211("leave - %pM not in station map.\n",
+		IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 				   addr);
 		return;
 	}
@@ -804,7 +804,7 @@
 	key_flags = le16_to_cpu(priv->stations[sta_id].sta.key.key_flags);
 	keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3;
 
-	IWL_DEBUG_WEP("Remove dynamic key: idx=%d sta=%d\n",
+	IWL_DEBUG_WEP(priv, "Remove dynamic key: idx=%d sta=%d\n",
 		      keyconf->keyidx, sta_id);
 
 	if (keyconf->keyidx != keyidx) {
@@ -868,7 +868,7 @@
 		ret = -EINVAL;
 	}
 
-	IWL_DEBUG_WEP("Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
+	IWL_DEBUG_WEP(priv, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
 		      keyconf->alg, keyconf->keylen, keyconf->keyidx,
 		      sta_id, ret);
 
@@ -881,13 +881,13 @@
 			   struct iwl_link_quality_cmd *lq)
 {
 	int i;
-	IWL_DEBUG_RATE("lq station id 0x%x\n", lq->sta_id);
-	IWL_DEBUG_RATE("lq ant 0x%X 0x%X\n",
+	IWL_DEBUG_RATE(priv, "lq station id 0x%x\n", lq->sta_id);
+	IWL_DEBUG_RATE(priv, "lq ant 0x%X 0x%X\n",
 		       lq->general_params.single_stream_ant_msk,
 		       lq->general_params.dual_stream_ant_msk);
 
 	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
-		IWL_DEBUG_RATE("lq index %d 0x%X\n",
+		IWL_DEBUG_RATE(priv, "lq index %d 0x%X\n",
 			       i, lq->rs_table[i].rate_n_flags);
 }
 #else
@@ -1064,7 +1064,7 @@
 		if (sta_id != IWL_INVALID_STATION)
 			return sta_id;
 
-		IWL_DEBUG_DROP("Station %pM not in station map. "
+		IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
 			       "Defaulting to broadcast...\n",
 			       hdr->addr1);
 		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 7d2b6e1..ae04c208 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -96,7 +96,7 @@
 		reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
 
 		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-			IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
+			IWL_DEBUG_INFO(priv, "Requesting wakeup, GP1 = 0x%x\n", reg);
 			iwl_set_bit(priv, CSR_GP_CNTRL,
 				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 			return ret;
@@ -638,14 +638,14 @@
 		memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
 		if (info->flags & IEEE80211_TX_CTL_AMPDU)
 			tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
-		IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n");
+		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
 		break;
 
 	case ALG_TKIP:
 		tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
 		ieee80211_get_tkip_key(keyconf, skb_frag,
 			IEEE80211_TKIP_P2_KEY, tx_cmd->key);
-		IWL_DEBUG_TX("tx_cmd with tkip hwcrypto\n");
+		IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n");
 		break;
 
 	case ALG_WEP:
@@ -657,7 +657,7 @@
 
 		memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
 
-		IWL_DEBUG_TX("Configuring packet for WEP encryption "
+		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
 			     "with key %d\n", keyconf->keyidx);
 		break;
 
@@ -703,7 +703,7 @@
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_DROP("Dropping - RF KILL\n");
+		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
 		goto drop_unlock;
 	}
 
@@ -717,11 +717,11 @@
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (ieee80211_is_auth(fc))
-		IWL_DEBUG_TX("Sending AUTH frame\n");
+		IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
 	else if (ieee80211_is_assoc_req(fc))
-		IWL_DEBUG_TX("Sending ASSOC frame\n");
+		IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
 	else if (ieee80211_is_reassoc_req(fc))
-		IWL_DEBUG_TX("Sending REASSOC frame\n");
+		IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
 #endif
 
 	/* drop all data frame if we are not associated */
@@ -731,7 +731,7 @@
 	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) ||
 	     !priv->assoc_station_added)) {
-		IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n");
+		IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
 		goto drop_unlock;
 	}
 
@@ -742,12 +742,12 @@
 	/* Find (or create) index into station table for destination station */
 	sta_id = iwl_get_sta_id(priv, hdr);
 	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_DROP("Dropping - INVALID STATION: %pM\n",
+		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
 		goto drop;
 	}
 
-	IWL_DEBUG_TX("station Id %d\n", sta_id);
+	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
 
 	swq_id = skb_get_queue_mapping(skb);
 	txq_id = swq_id;
@@ -757,7 +757,7 @@
 		seq_number = priv->stations[sta_id].tid[tid].seq_number;
 		seq_number &= IEEE80211_SCTL_SEQ;
 		hdr->seq_ctrl = hdr->seq_ctrl &
-				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG);
+				cpu_to_le16(IEEE80211_SCTL_FRAG);
 		hdr->seq_ctrl |= cpu_to_le16(seq_number);
 		seq_number += 0x10;
 		/* aggregation is on for this <sta,tid> */
@@ -938,7 +938,7 @@
 	       !(cmd->meta.flags & CMD_SIZE_HUGE));
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_INFO("Not sending command - RF KILL");
+		IWL_DEBUG_INFO(priv, "Not sending command - RF KILL");
 		return -EIO;
 	}
 
@@ -981,7 +981,7 @@
 	switch (out_cmd->hdr.cmd) {
 	case REPLY_TX_LINK_QUALITY_CMD:
 	case SENSITIVITY_CMD:
-		IWL_DEBUG_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, "
+		IWL_DEBUG_HC_DUMP(priv, "Sending command %s (#%x), seq: 0x%04X, "
 				"%d bytes at %d[%d]:%d\n",
 				get_cmd_string(out_cmd->hdr.cmd),
 				out_cmd->hdr.cmd,
@@ -989,7 +989,7 @@
 				q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
 				break;
 	default:
-		IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
+		IWL_DEBUG_HC(priv, "Sending command %s (#%x), seq: 0x%04X, "
 				"%d bytes at %d[%d]:%d\n",
 				get_cmd_string(out_cmd->hdr.cmd),
 				out_cmd->hdr.cmd,
@@ -1194,7 +1194,7 @@
 		tid_data->agg.state = IWL_AGG_ON;
 		ieee80211_start_tx_ba_cb_irqsafe(priv->hw, ra, tid);
 	} else {
-		IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n",
+		IWL_DEBUG_HT(priv, "HW queue is NOT empty: %d packets in HW queue\n",
 			     tid_data->tfds_in_queue);
 		tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA;
 	}
@@ -1235,13 +1235,13 @@
 
 	/* The queue is not empty */
 	if (write_ptr != read_ptr) {
-		IWL_DEBUG_HT("Stopping a non empty AGG HW QUEUE\n");
+		IWL_DEBUG_HT(priv, "Stopping a non empty AGG HW QUEUE\n");
 		priv->stations[sta_id].tid[tid].agg.state =
 				IWL_EMPTYING_HW_QUEUE_DELBA;
 		return 0;
 	}
 
-	IWL_DEBUG_HT("HW queue is empty\n");
+	IWL_DEBUG_HT(priv, "HW queue is empty\n");
 	priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1272,7 +1272,7 @@
 		    (q->read_ptr == q->write_ptr)) {
 			u16 ssn = SEQ_TO_SN(tid_data->seq_number);
 			int tx_fifo = default_tid_to_tx_fifo[tid];
-			IWL_DEBUG_HT("HW queue empty: continue DELBA flow\n");
+			IWL_DEBUG_HT(priv, "HW queue empty: continue DELBA flow\n");
 			priv->cfg->ops->lib->txq_agg_disable(priv, txq_id,
 							     ssn, tx_fifo);
 			tid_data->agg.state = IWL_AGG_OFF;
@@ -1282,7 +1282,7 @@
 	case IWL_EMPTYING_HW_QUEUE_ADDBA:
 		/* We are reclaiming the last packet of the queue */
 		if (tid_data->tfds_in_queue == 0) {
-			IWL_DEBUG_HT("HW queue empty: continue ADDBA flow\n");
+			IWL_DEBUG_HT(priv, "HW queue empty: continue ADDBA flow\n");
 			tid_data->agg.state = IWL_AGG_ON;
 			ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid);
 		}
@@ -1317,7 +1317,7 @@
 
 	/* Mark that the expected block-ack response arrived */
 	agg->wait_for_ba = 0;
-	IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
+	IWL_DEBUG_TX_REPLY(priv, "BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
 
 	/* Calculate shift to align block-ack bits with our Tx window bits */
 	sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4);
@@ -1328,7 +1328,7 @@
 	bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
 
 	if (agg->frame_count > (64 - sh)) {
-		IWL_DEBUG_TX_REPLY("more frames than bitmap size");
+		IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
 		return -1;
 	}
 
@@ -1341,7 +1341,7 @@
 	for (i = 0; i < agg->frame_count ; i++) {
 		ack = bitmap & (1ULL << i);
 		successes += !!ack;
-		IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n",
+		IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
 			ack ? "ACK" : "NACK", i, (agg->start_idx + i) & 0xff,
 			agg->start_idx + i);
 	}
@@ -1354,7 +1354,7 @@
 	info->status.ampdu_ack_len = agg->frame_count;
 	iwl_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
 
-	IWL_DEBUG_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);
+	IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap);
 
 	return 0;
 }
@@ -1399,19 +1399,19 @@
 
 	/* TODO: Need to get this copy more safely - now good for debug */
 
-	IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d] Received from %pM, "
+	IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, "
 			   "sta_id = %d\n",
 			   agg->wait_for_ba,
 			   (u8 *) &ba_resp->sta_addr_lo32,
 			   ba_resp->sta_id);
-	IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = "
+	IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = "
 			   "%d, scd_ssn = %d\n",
 			   ba_resp->tid,
 			   ba_resp->seq_ctl,
 			   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
 			   ba_resp->scd_flow,
 			   ba_resp->scd_ssn);
-	IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx \n",
+	IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n",
 			   agg->start_idx,
 			   (unsigned long long)agg->bitmap);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 25a3508..42cc288 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -203,7 +203,7 @@
 		return index;
 	}
 
-	IWL_DEBUG_ASSOC("Add STA ID %d: %pM\n", index, addr);
+	IWL_DEBUG_ASSOC(priv, "Add STA ID %d: %pM\n", index, addr);
 	station = &priv->stations_39[index];
 	station->used = 1;
 	priv->num_stations++;
@@ -233,166 +233,6 @@
 
 }
 
-/**
- * iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
- * @band: 2.4 or 5 GHz band
- * @channel: Any channel valid for the requested band
-
- * In addition to setting the staging RXON, priv->band is also set.
- *
- * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
- * in the staging RXON flag structure based on the band
- */
-static int iwl3945_set_rxon_channel(struct iwl_priv *priv,
-				    enum ieee80211_band band,
-				    u16 channel)
-{
-	if (!iwl_get_channel_info(priv, band, channel)) {
-		IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
-			       channel, band);
-		return -EINVAL;
-	}
-
-	if ((le16_to_cpu(priv->staging39_rxon.channel) == channel) &&
-	    (priv->band == band))
-		return 0;
-
-	priv->staging39_rxon.channel = cpu_to_le16(channel);
-	if (band == IEEE80211_BAND_5GHZ)
-		priv->staging39_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
-	else
-		priv->staging39_rxon.flags |= RXON_FLG_BAND_24G_MSK;
-
-	priv->band = band;
-
-	IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
-
-	return 0;
-}
-
-/**
- * iwl3945_check_rxon_cmd - validate RXON structure is valid
- *
- * NOTE:  This is really only useful during development and can eventually
- * be #ifdef'd out once the driver is stable and folks aren't actively
- * making changes
- */
-static int iwl3945_check_rxon_cmd(struct iwl_priv *priv)
-{
-	int error = 0;
-	int counter = 1;
-	struct iwl3945_rxon_cmd *rxon = &priv->staging39_rxon;
-
-	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
-		error |= le32_to_cpu(rxon->flags &
-				(RXON_FLG_TGJ_NARROW_BAND_MSK |
-				 RXON_FLG_RADAR_DETECT_MSK));
-		if (error)
-			IWL_WARN(priv, "check 24G fields %d | %d\n",
-				    counter++, error);
-	} else {
-		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
-				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
-		if (error)
-			IWL_WARN(priv, "check 52 fields %d | %d\n",
-				    counter++, error);
-		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
-		if (error)
-			IWL_WARN(priv, "check 52 CCK %d | %d\n",
-				    counter++, error);
-	}
-	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
-	if (error)
-		IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error);
-
-	/* make sure basic rates 6Mbps and 1Mbps are supported */
-	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
-		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
-	if (error)
-		IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error);
-
-	error |= (le16_to_cpu(rxon->assoc_id) > 2007);
-	if (error)
-		IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
-	if (error)
-		IWL_WARN(priv, "check CCK and short slot %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
-	if (error)
-		IWL_WARN(priv, "check CCK & auto detect %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
-			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
-	if (error)
-		IWL_WARN(priv, "check TGG and auto detect %d | %d\n",
-			    counter++, error);
-
-	if ((rxon->flags & RXON_FLG_DIS_DIV_MSK))
-		error |= ((rxon->flags & (RXON_FLG_ANT_B_MSK |
-				RXON_FLG_ANT_A_MSK)) == 0);
-	if (error)
-		IWL_WARN(priv, "check antenna %d %d\n", counter++, error);
-
-	if (error)
-		IWL_WARN(priv, "Tuning to channel %d\n",
-			    le16_to_cpu(rxon->channel));
-
-	if (error) {
-		IWL_ERR(priv, "Not a valid rxon_assoc_cmd field values\n");
-		return -1;
-	}
-	return 0;
-}
-
-/**
- * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
- * @priv: staging_rxon is compared to active_rxon
- *
- * If the RXON structure is changing enough to require a new tune,
- * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
- * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
- */
-static int iwl3945_full_rxon_required(struct iwl_priv *priv)
-{
-
-	/* These items are only settable from the full RXON command */
-	if (!(iwl3945_is_associated(priv)) ||
-	    compare_ether_addr(priv->staging39_rxon.bssid_addr,
-			       priv->active39_rxon.bssid_addr) ||
-	    compare_ether_addr(priv->staging39_rxon.node_addr,
-			       priv->active39_rxon.node_addr) ||
-	    compare_ether_addr(priv->staging39_rxon.wlap_bssid_addr,
-			       priv->active39_rxon.wlap_bssid_addr) ||
-	    (priv->staging39_rxon.dev_type != priv->active39_rxon.dev_type) ||
-	    (priv->staging39_rxon.channel != priv->active39_rxon.channel) ||
-	    (priv->staging39_rxon.air_propagation !=
-	     priv->active39_rxon.air_propagation) ||
-	    (priv->staging39_rxon.assoc_id != priv->active39_rxon.assoc_id))
-		return 1;
-
-	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
-	 * be updated with the RXON_ASSOC command -- however only some
-	 * flag transitions are allowed using RXON_ASSOC */
-
-	/* Check if we are not switching bands */
-	if ((priv->staging39_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
-	    (priv->active39_rxon.flags & RXON_FLG_BAND_24G_MSK))
-		return 1;
-
-	/* Check if we are switching association toggle */
-	if ((priv->staging39_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
-		(priv->active39_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
-		return 1;
-
-	return 0;
-}
-
 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
 {
 	int rc = 0;
@@ -404,21 +244,21 @@
 		.meta.flags = CMD_WANT_SKB,
 		.data = &rxon_assoc,
 	};
-	const struct iwl3945_rxon_cmd *rxon1 = &priv->staging39_rxon;
-	const struct iwl3945_rxon_cmd *rxon2 = &priv->active39_rxon;
+	const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
+	const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
 
 	if ((rxon1->flags == rxon2->flags) &&
 	    (rxon1->filter_flags == rxon2->filter_flags) &&
 	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
 	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
 		return 0;
 	}
 
-	rxon_assoc.flags = priv->staging39_rxon.flags;
-	rxon_assoc.filter_flags = priv->staging39_rxon.filter_flags;
-	rxon_assoc.ofdm_basic_rates = priv->staging39_rxon.ofdm_basic_rates;
-	rxon_assoc.cck_basic_rates = priv->staging39_rxon.cck_basic_rates;
+	rxon_assoc.flags = priv->staging_rxon.flags;
+	rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
+	rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
+	rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
 	rxon_assoc.reserved = 0;
 
 	rc = iwl_send_cmd_sync(priv, &cmd);
@@ -485,21 +325,22 @@
 static int iwl3945_commit_rxon(struct iwl_priv *priv)
 {
 	/* cast away the const for active_rxon in this function */
-	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active39_rxon;
+	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
+	struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
 	int rc = 0;
 
 	if (!iwl_is_alive(priv))
 		return -1;
 
 	/* always get timestamp with Rx frame */
-	priv->staging39_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
+	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
 
 	/* select antenna */
-	priv->staging39_rxon.flags &=
+	staging_rxon->flags &=
 	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
-	priv->staging39_rxon.flags |= iwl3945_get_antenna_flags(priv);
+	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
 
-	rc = iwl3945_check_rxon_cmd(priv);
+	rc = iwl_check_rxon_cmd(priv);
 	if (rc) {
 		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
 		return -EINVAL;
@@ -508,7 +349,7 @@
 	/* If we don't need to send a full RXON, we can use
 	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
 	 * and other flags for the current radio configuration. */
-	if (!iwl3945_full_rxon_required(priv)) {
+	if (!iwl_full_rxon_required(priv)) {
 		rc = iwl3945_send_rxon_assoc(priv);
 		if (rc) {
 			IWL_ERR(priv, "Error setting RXON_ASSOC "
@@ -516,7 +357,7 @@
 			return rc;
 		}
 
-		memcpy(active_rxon, &priv->staging39_rxon, sizeof(*active_rxon));
+		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
 
 		return 0;
 	}
@@ -525,14 +366,20 @@
 	 * an RXON_ASSOC and the new config wants the associated mask enabled,
 	 * we must clear the associated from the active configuration
 	 * before we apply the new config */
-	if (iwl3945_is_associated(priv) &&
-	    (priv->staging39_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
-		IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
+	if (iwl_is_associated(priv) &&
+	    (staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK)) {
+		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 
+		/*
+		 * reserved4 and 5 could have been filled by the iwlcore code.
+		 * Let's clear them before pushing to the 3945.
+		 */
+		active_rxon->reserved4 = 0;
+		active_rxon->reserved5 = 0;
 		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
 				      sizeof(struct iwl3945_rxon_cmd),
-				      &priv->active39_rxon);
+				      &priv->active_rxon);
 
 		/* If the mask clearing failed then we set
 		 * active_rxon back to what it was previously */
@@ -544,24 +391,32 @@
 		}
 	}
 
-	IWL_DEBUG_INFO("Sending RXON\n"
+	IWL_DEBUG_INFO(priv, "Sending RXON\n"
 		       "* with%s RXON_FILTER_ASSOC_MSK\n"
 		       "* channel = %d\n"
 		       "* bssid = %pM\n",
-		       ((priv->staging39_rxon.filter_flags &
+		       ((priv->staging_rxon.filter_flags &
 			 RXON_FILTER_ASSOC_MSK) ? "" : "out"),
-		       le16_to_cpu(priv->staging39_rxon.channel),
-		       priv->staging_rxon.bssid_addr);
+		       le16_to_cpu(staging_rxon->channel),
+		       staging_rxon->bssid_addr);
+
+	/*
+	 * reserved4 and 5 could have been filled by the iwlcore code.
+	 * Let's clear them before pushing to the 3945.
+	 */
+	staging_rxon->reserved4 = 0;
+	staging_rxon->reserved5 = 0;
 
 	/* Apply the new configuration */
 	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl3945_rxon_cmd), &priv->staging39_rxon);
+			      sizeof(struct iwl3945_rxon_cmd),
+			      staging_rxon);
 	if (rc) {
 		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
 		return rc;
 	}
 
-	memcpy(active_rxon, &priv->staging39_rxon, sizeof(*active_rxon));
+	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
 
 	iwl3945_clear_stations_table(priv);
 
@@ -582,9 +437,10 @@
 
 	/* If we have set the ASSOC_MSK and we are in BSS mode then
 	 * add the IWL_AP_ID to the station rate table */
-	if (iwl3945_is_associated(priv) &&
+	if (iwl_is_associated(priv) &&
 	    (priv->iw_mode == NL80211_IFTYPE_STATION))
-		if (iwl3945_add_station(priv, priv->active39_rxon.bssid_addr, 1, 0)
+		if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr,
+					1, 0)
 		    == IWL_INVALID_STATION) {
 			IWL_ERR(priv, "Error adding AP address for transmit\n");
 			return -EIO;
@@ -633,7 +489,7 @@
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-	IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
+	IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
 	iwl_send_add_sta(priv,
 		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, 0);
 	return 0;
@@ -652,7 +508,7 @@
 	priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-	IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
+	IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
 	iwl_send_add_sta(priv,
 		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, 0);
 	return 0;
@@ -662,7 +518,7 @@
 {
 	struct list_head *element;
 
-	IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
+	IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
 		       priv->frames_count);
 
 	while (!list_empty(&priv->free_frames)) {
@@ -710,7 +566,7 @@
 				int left)
 {
 
-	if (!iwl3945_is_associated(priv) || !priv->ibss_beacon ||
+	if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
 	    ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
 	     (priv->iw_mode != NL80211_IFTYPE_AP)))
 		return 0;
@@ -723,30 +579,6 @@
 	return priv->ibss_beacon->len;
 }
 
-static u8 iwl3945_rate_get_lowest_plcp(struct iwl_priv *priv)
-{
-	u8 i;
-	int rate_mask;
-
-	/* Set rate mask*/
-	if (priv->staging39_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK;
-	else
-		rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK;
-
-	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
-	     i = iwl3945_rates[i].next_ieee) {
-		if (rate_mask & (1 << i))
-			return iwl3945_rates[i].plcp;
-	}
-
-	/* No valid rate was found. Assign the lowest one */
-	if (priv->staging39_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		return IWL_RATE_1M_PLCP;
-	else
-		return IWL_RATE_6M_PLCP;
-}
-
 static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
 {
 	struct iwl3945_frame *frame;
@@ -762,7 +594,7 @@
 		return -ENOMEM;
 	}
 
-	rate = iwl3945_rate_get_lowest_plcp(priv);
+	rate = iwl_rate_get_lowest_plcp(priv);
 
 	frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
 
@@ -815,8 +647,8 @@
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (force || iwl3945_is_associated(priv)) {
-		IWL_DEBUG_QOS("send QoS cmd with QoS active %d \n",
+	if (force || iwl_is_associated(priv)) {
+		IWL_DEBUG_QOS(priv, "send QoS cmd with QoS active %d \n",
 			      priv->qos_data.qos_active);
 
 		iwl3945_send_qos_params_command(priv,
@@ -824,165 +656,9 @@
 	}
 }
 
-/*
- * Power management (not Tx power!) functions
- */
-#define MSEC_TO_USEC 1024
-
-
-/* default power management (not Tx power) table values */
-/* for TIM  0-10 */
-static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
-	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
-	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
-	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
-	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
-	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
-	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
-};
-
-/* for TIM > 10 */
-static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
-	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
-	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
-	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
-	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
-	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
-	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
-};
-
-int iwl3945_power_init_handle(struct iwl_priv *priv)
-{
-	int rc = 0, i;
-	struct iwl_power_mgr *pow_data;
-	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
-	u16 pci_pm;
-
-	IWL_DEBUG_POWER("Initialize power \n");
-
-	pow_data = &priv->power_data;
-
-	memset(pow_data, 0, sizeof(*pow_data));
-
-	pow_data->dtim_period = 1;
-
-	memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
-	memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
-
-	rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm);
-	if (rc != 0)
-		return 0;
-	else {
-		struct iwl_powertable_cmd *cmd;
-
-		IWL_DEBUG_POWER("adjust power command flags\n");
-
-		for (i = 0; i < IWL_POWER_MAX; i++) {
-			cmd = &pow_data->pwr_range_0[i].cmd;
-
-			if (pci_pm & 0x1)
-				cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
-			else
-				cmd->flags |= IWL_POWER_PCI_PM_MSK;
-		}
-	}
-	return rc;
-}
-
-static int iwl3945_update_power_cmd(struct iwl_priv *priv,
-				struct iwl_powertable_cmd *cmd, u32 mode)
-{
-	struct iwl_power_mgr *pow_data;
-	struct iwl_power_vec_entry *range;
-	u32 max_sleep = 0;
-	int i;
-	u8 period = 0;
-	bool skip;
-
-	if (mode > IWL_POWER_INDEX_5) {
-		IWL_DEBUG_POWER("Error invalid power mode \n");
-		return -EINVAL;
-	}
-	pow_data = &priv->power_data;
-
-	if (pow_data->dtim_period < 10)
-		range = &pow_data->pwr_range_0[0];
-	else
-		range = &pow_data->pwr_range_1[1];
-
-	memcpy(cmd, &range[mode].cmd, sizeof(struct iwl3945_powertable_cmd));
-
-
-	if (period == 0) {
-		period = 1;
-		skip = false;
-	} else {
-		skip = !!range[mode].no_dtim;
-	}
-
-	if (skip) {
-		__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
-		max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
-		cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	} else {
-		max_sleep = period;
-		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	}
-
-	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
-		if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
-			cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
-
-	IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
-	IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
-	IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
-	IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
-			le32_to_cpu(cmd->sleep_interval[0]),
-			le32_to_cpu(cmd->sleep_interval[1]),
-			le32_to_cpu(cmd->sleep_interval[2]),
-			le32_to_cpu(cmd->sleep_interval[3]),
-			le32_to_cpu(cmd->sleep_interval[4]));
-
-	return 0;
-}
-
-static int iwl3945_send_power_mode(struct iwl_priv *priv, u32 mode)
-{
-	u32 uninitialized_var(final_mode);
-	int rc;
-	struct iwl_powertable_cmd cmd;
-
-	/* If on battery, set to 3,
-	 * if plugged into AC power, set to CAM ("continuously aware mode"),
-	 * else user level */
-	switch (mode) {
-	case IWL39_POWER_BATTERY:
-		final_mode = IWL_POWER_INDEX_3;
-		break;
-	case IWL39_POWER_AC:
-		final_mode = IWL_POWER_MODE_CAM;
-		break;
-	default:
-		final_mode = mode;
-		break;
-	}
-
-	iwl3945_update_power_cmd(priv, &cmd, final_mode);
-
-	/* FIXME use get_hcmd_size 3945 command is 4 bytes shorter */
-	rc = iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
-			      sizeof(struct iwl3945_powertable_cmd), &cmd);
-
-	if (final_mode == IWL_POWER_MODE_CAM)
-		clear_bit(STATUS_POWER_PMI, &priv->status);
-	else
-		set_bit(STATUS_POWER_PMI, &priv->status);
-
-	return rc;
-}
 
 #define MAX_UCODE_BEACON_INTERVAL	1024
-#define INTEL_CONN_LISTEN_INTERVAL	__constant_cpu_to_le16(0xA)
+#define INTEL_CONN_LISTEN_INTERVAL	cpu_to_le16(0xA)
 
 static __le16 iwl3945_adjust_beacon_interval(u16 beacon_val)
 {
@@ -1043,8 +719,8 @@
 	priv->rxon_timing.beacon_init_val =
 	    cpu_to_le32((u32) ((u64) interval_tm_unit - result));
 
-	IWL_DEBUG_ASSOC
-	    ("beacon interval %d beacon timer %d beacon tim %d\n",
+	IWL_DEBUG_ASSOC(priv,
+		"beacon interval %d beacon timer %d beacon tim %d\n",
 		le16_to_cpu(priv->rxon_timing.beacon_interval),
 		le32_to_cpu(priv->rxon_timing.beacon_init_val),
 		le16_to_cpu(priv->rxon_timing.atim_window));
@@ -1053,22 +729,22 @@
 static int iwl3945_scan_initiate(struct iwl_priv *priv)
 {
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+		IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
 		return -EIO;
 	}
 
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN("Scan already in progress.\n");
+		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
 		return -EAGAIN;
 	}
 
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN("Scan request while abort pending.  "
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending.  "
 			       "Queuing.\n");
 		return -EAGAIN;
 	}
 
-	IWL_DEBUG_INFO("Starting scan...\n");
+	IWL_DEBUG_INFO(priv, "Starting scan...\n");
 	if (priv->cfg->sku & IWL_SKU_G)
 		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
 	if (priv->cfg->sku & IWL_SKU_A)
@@ -1082,115 +758,6 @@
 	return 0;
 }
 
-static int iwl3945_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
-{
-	struct iwl3945_rxon_cmd *rxon = &priv->staging39_rxon;
-
-	if (hw_decrypt)
-		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
-	else
-		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
-
-	return 0;
-}
-
-static void iwl3945_set_flags_for_phymode(struct iwl_priv *priv,
-					  enum ieee80211_band band)
-{
-	if (band == IEEE80211_BAND_5GHZ) {
-		priv->staging39_rxon.flags &=
-		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
-		      | RXON_FLG_CCK_MSK);
-		priv->staging39_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-	} else {
-		/* Copied from iwl3945_bg_post_associate() */
-		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-			priv->staging39_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
-			priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		priv->staging39_rxon.flags |= RXON_FLG_BAND_24G_MSK;
-		priv->staging39_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
-		priv->staging39_rxon.flags &= ~RXON_FLG_CCK_MSK;
-	}
-}
-
-/*
- * initialize rxon structure with default values from eeprom
- */
-static void iwl3945_connection_init_rx_config(struct iwl_priv *priv,
-					      int mode)
-{
-	const struct iwl_channel_info *ch_info;
-
-	memset(&priv->staging39_rxon, 0, sizeof(priv->staging39_rxon));
-
-	switch (mode) {
-	case NL80211_IFTYPE_AP:
-		priv->staging39_rxon.dev_type = RXON_DEV_TYPE_AP;
-		break;
-
-	case NL80211_IFTYPE_STATION:
-		priv->staging39_rxon.dev_type = RXON_DEV_TYPE_ESS;
-		priv->staging39_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case NL80211_IFTYPE_ADHOC:
-		priv->staging39_rxon.dev_type = RXON_DEV_TYPE_IBSS;
-		priv->staging39_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
-		priv->staging39_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
-						  RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case NL80211_IFTYPE_MONITOR:
-		priv->staging39_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
-		priv->staging39_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
-		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-	default:
-		IWL_ERR(priv, "Unsupported interface type %d\n", mode);
-		break;
-	}
-
-#if 0
-	/* TODO:  Figure out when short_preamble would be set and cache from
-	 * that */
-	if (!hw_to_local(priv->hw)->short_preamble)
-		priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		priv->staging39_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-#endif
-
-	ch_info = iwl_get_channel_info(priv, priv->band,
-				       le16_to_cpu(priv->active39_rxon.channel));
-
-	if (!ch_info)
-		ch_info = &priv->channel_info[0];
-
-	/*
-	 * in some case A channels are all non IBSS
-	 * in this case force B/G channel
-	 */
-	if ((mode == NL80211_IFTYPE_ADHOC) && !(is_channel_ibss(ch_info)))
-		ch_info = &priv->channel_info[0];
-
-	priv->staging39_rxon.channel = cpu_to_le16(ch_info->channel);
-	if (is_channel_a_band(ch_info))
-		priv->band = IEEE80211_BAND_5GHZ;
-	else
-		priv->band = IEEE80211_BAND_2GHZ;
-
-	iwl3945_set_flags_for_phymode(priv, priv->band);
-
-	priv->staging39_rxon.ofdm_basic_rates =
-	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-	priv->staging39_rxon.cck_basic_rates =
-	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-}
-
 static int iwl3945_set_mode(struct iwl_priv *priv, int mode)
 {
 	if (mode == NL80211_IFTYPE_ADHOC) {
@@ -1198,17 +765,16 @@
 
 		ch_info = iwl_get_channel_info(priv,
 			priv->band,
-			le16_to_cpu(priv->staging39_rxon.channel));
+			le16_to_cpu(priv->staging_rxon.channel));
 
 		if (!ch_info || !is_channel_ibss(ch_info)) {
 			IWL_ERR(priv, "channel %d not IBSS channel\n",
-				  le16_to_cpu(priv->staging39_rxon.channel));
+				  le16_to_cpu(priv->staging_rxon.channel));
 			return -EINVAL;
 		}
 	}
 
-	iwl3945_connection_init_rx_config(priv, mode);
-	memcpy(priv->staging39_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+	iwl_connection_init_rx_config(priv, mode);
 
 	iwl3945_clear_stations_table(priv);
 
@@ -1219,7 +785,7 @@
 	cancel_delayed_work(&priv->scan_check);
 	if (iwl_scan_cancel_timeout(priv, 100)) {
 		IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-		IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+		IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
 		return -EAGAIN;
 	}
 
@@ -1242,7 +808,7 @@
 	case ALG_CCMP:
 		tx->sec_ctl = TX_CMD_SEC_CCM;
 		memcpy(tx->key, keyinfo->key, keyinfo->keylen);
-		IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n");
+		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
 		break;
 
 	case ALG_TKIP:
@@ -1266,7 +832,7 @@
 
 		memcpy(&tx->key[3], keyinfo->key, keyinfo->keylen);
 
-		IWL_DEBUG_TX("Configuring packet for WEP encryption "
+		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
 			     "with key %d\n", info->control.hw_key->hw_key_idx);
 		break;
 
@@ -1383,7 +949,7 @@
 		if (sta_id != IWL_INVALID_STATION)
 			return sta_id;
 
-		IWL_DEBUG_DROP("Station %pM not in station map. "
+		IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
 			       "Defaulting to broadcast...\n",
 			       hdr->addr1);
 		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
@@ -1429,7 +995,7 @@
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_DROP("Dropping - RF KILL\n");
+		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
 		goto drop_unlock;
 	}
 
@@ -1445,19 +1011,19 @@
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (ieee80211_is_auth(fc))
-		IWL_DEBUG_TX("Sending AUTH frame\n");
+		IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
 	else if (ieee80211_is_assoc_req(fc))
-		IWL_DEBUG_TX("Sending ASSOC frame\n");
+		IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
 	else if (ieee80211_is_reassoc_req(fc))
-		IWL_DEBUG_TX("Sending REASSOC frame\n");
+		IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
 #endif
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
 	    (priv->iw_mode != NL80211_IFTYPE_MONITOR) && /* packet injection */
-	    (!iwl3945_is_associated(priv) ||
+	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
-		IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
+		IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
 		goto drop_unlock;
 	}
 
@@ -1468,12 +1034,12 @@
 	/* Find (or create) index into station table for destination station */
 	sta_id = iwl3945_get_sta_id(priv, hdr);
 	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_DROP("Dropping - INVALID STATION: %pM\n",
+		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
 		goto drop;
 	}
 
-	IWL_DEBUG_RATE("station Id %d\n", sta_id);
+	IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
 
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
@@ -1482,7 +1048,7 @@
 				IEEE80211_SCTL_SEQ;
 		hdr->seq_ctrl = cpu_to_le16(seq_number) |
 			(hdr->seq_ctrl &
-				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
+				cpu_to_le16(IEEE80211_SCTL_FRAG));
 		seq_number += 0x10;
 	}
 
@@ -1622,60 +1188,6 @@
 	return -1;
 }
 
-static void iwl3945_set_rate(struct iwl_priv *priv)
-{
-	const struct ieee80211_supported_band *sband = NULL;
-	struct ieee80211_rate *rate;
-	int i;
-
-	sband = iwl_get_hw_mode(priv, priv->band);
-	if (!sband) {
-		IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n");
-		return;
-	}
-
-	priv->active_rate = 0;
-	priv->active_rate_basic = 0;
-
-	IWL_DEBUG_RATE("Setting rates for %s GHz\n",
-		       sband->band == IEEE80211_BAND_2GHZ ? "2.4" : "5");
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		rate = &sband->bitrates[i];
-		if ((rate->hw_value < IWL_RATE_COUNT) &&
-		    !(rate->flags & IEEE80211_CHAN_DISABLED)) {
-			IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
-				       rate->hw_value, iwl3945_rates[rate->hw_value].plcp);
-			priv->active_rate |= (1 << rate->hw_value);
-		}
-	}
-
-	IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
-		       priv->active_rate, priv->active_rate_basic);
-
-	/*
-	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
-	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
-	 * OFDM
-	 */
-	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
-		priv->staging39_rxon.cck_basic_rates =
-		    ((priv->active_rate_basic &
-		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
-	else
-		priv->staging39_rxon.cck_basic_rates =
-		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
-	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
-		priv->staging39_rxon.ofdm_basic_rates =
-		    ((priv->active_rate_basic &
-		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
-		      IWL_FIRST_OFDM_RATE) & 0xFF;
-	else
-		priv->staging39_rxon.ofdm_basic_rates =
-		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-}
-
 static void iwl3945_radio_kill_sw(struct iwl_priv *priv, int disable_radio)
 {
 	unsigned long flags;
@@ -1683,7 +1195,7 @@
 	if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status))
 		return;
 
-	IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
+	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO %s\n",
 			  disable_radio ? "OFF" : "ON");
 
 	if (disable_radio) {
@@ -1716,7 +1228,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_RF_KILL("Can not turn radio back on - "
+		IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
 				  "disabled by HW switch\n");
 		return;
 	}
@@ -1726,38 +1238,6 @@
 	return;
 }
 
-void iwl3945_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb,
-			    u32 decrypt_res, struct ieee80211_rx_status *stats)
-{
-	u16 fc =
-	    le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control);
-
-	if (priv->active39_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
-		return;
-
-	if (!(fc & IEEE80211_FCTL_PROTECTED))
-		return;
-
-	IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
-	switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
-	case RX_RES_STATUS_SEC_TYPE_TKIP:
-		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
-		    RX_RES_STATUS_BAD_ICV_MIC)
-			stats->flag |= RX_FLAG_MMIC_ERROR;
-	case RX_RES_STATUS_SEC_TYPE_WEP:
-	case RX_RES_STATUS_SEC_TYPE_CCMP:
-		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
-		    RX_RES_STATUS_DECRYPT_OK) {
-			IWL_DEBUG_RX("hw decrypt successfully!!!\n");
-			stats->flag |= RX_FLAG_DECRYPTED;
-		}
-		break;
-
-	default:
-		break;
-	}
-}
-
 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
 
 #include "iwl-spectrum.h"
@@ -1827,7 +1307,7 @@
 	int spectrum_resp_status;
 	int duration = le16_to_cpu(params->duration);
 
-	if (iwl3945_is_associated(priv))
+	if (iwl_is_associated(priv))
 		add_time =
 		    iwl3945_usecs_to_beacons(
 			le64_to_cpu(params->start_time) - priv->last_tsf,
@@ -1842,7 +1322,7 @@
 	cmd.len = sizeof(spectrum);
 	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
 
-	if (iwl3945_is_associated(priv))
+	if (iwl_is_associated(priv))
 		spectrum.start_time =
 		    iwl3945_add_beacon_time(priv->last_beacon_time,
 				add_time,
@@ -1853,7 +1333,7 @@
 	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
 	spectrum.channels[0].channel = params->channel;
 	spectrum.channels[0].type = type;
-	if (priv->active39_rxon.flags & RXON_FLG_BAND_24G_MSK)
+	if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
 		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
 		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
 
@@ -1871,7 +1351,7 @@
 	switch (spectrum_resp_status) {
 	case 0:		/* Command will be handled */
 		if (res->u.spectrum.id != 0xff) {
-			IWL_DEBUG_INFO("Replaced existing measurement: %d\n",
+			IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
 						res->u.spectrum.id);
 			priv->measurement_status &= ~MEASUREMENT_READY;
 		}
@@ -1899,18 +1379,18 @@
 
 	palive = &pkt->u.alive_frame;
 
-	IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
+	IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
 		       "0x%01X 0x%01X\n",
 		       palive->is_valid, palive->ver_type,
 		       palive->ver_subtype);
 
 	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
-		IWL_DEBUG_INFO("Initialization Alive received.\n");
+		IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 		memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
 		       sizeof(struct iwl_alive_resp));
 		pwork = &priv->init_alive_start;
 	} else {
-		IWL_DEBUG_INFO("Runtime Alive received.\n");
+		IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 		memcpy(&priv->card_alive, &pkt->u.alive_frame,
 		       sizeof(struct iwl_alive_resp));
 		pwork = &priv->alive_start;
@@ -1933,7 +1413,7 @@
 	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
 #endif
 
-	IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
+	IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
 	return;
 }
 
@@ -1951,19 +1431,6 @@
 		le32_to_cpu(pkt->u.err_resp.error_info));
 }
 
-#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
-
-static void iwl3945_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
-	struct iwl3945_rxon_cmd *rxon = (void *)&priv->active39_rxon;
-	struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
-	IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
-		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
-	rxon->channel = csa->channel;
-	priv->staging39_rxon.channel = csa->channel;
-}
-
 static void iwl3945_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb)
 {
@@ -1972,7 +1439,7 @@
 	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
 
 	if (!report->state) {
-		IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO,
+		IWL_DEBUG(priv, IWL_DL_11H | IWL_DL_INFO,
 			  "Spectrum Measure Notification: Start\n");
 		return;
 	}
@@ -1988,7 +1455,7 @@
 #ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
 	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
-	IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
+	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
 #endif
 }
@@ -1997,7 +1464,7 @@
 					     struct iwl_rx_mem_buffer *rxb)
 {
 	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
-	IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
+	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
 			"notification for %s:\n",
 			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
 	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw,
@@ -2037,7 +1504,7 @@
 	struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
 	u8 rate = beacon->beacon_notify_hdr.rate;
 
-	IWL_DEBUG_RX("beacon status %x retries %d iss %d "
+	IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
 		"tsf %d %d rate %d\n",
 		le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
 		beacon->beacon_notify_hdr.failure_frame,
@@ -2060,7 +1527,7 @@
 	struct iwl_scanreq_notification *notif =
 	    (struct iwl_scanreq_notification *)pkt->u.raw;
 
-	IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+	IWL_DEBUG_RX(priv, "Scan request status = 0x%x\n", notif->status);
 #endif
 }
 
@@ -2072,7 +1539,7 @@
 	struct iwl_scanstart_notification *notif =
 	    (struct iwl_scanstart_notification *)pkt->u.raw;
 	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
-	IWL_DEBUG_SCAN("Scan start: "
+	IWL_DEBUG_SCAN(priv, "Scan start: "
 		       "%d [802.11%s] "
 		       "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
 		       notif->channel,
@@ -2091,7 +1558,7 @@
 	    (struct iwl_scanresults_notification *)pkt->u.raw;
 #endif
 
-	IWL_DEBUG_SCAN("Scan ch.res: "
+	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
 		       "%d [802.11%s] "
 		       "(TSF: 0x%08X:%08X) - %d "
 		       "elapsed=%lu usec (%dms since last)\n",
@@ -2117,7 +1584,7 @@
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 #endif
 
-	IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
@@ -2128,7 +1595,7 @@
 	/* The scan completion notification came in, so kill that timer... */
 	cancel_delayed_work(&priv->scan_check);
 
-	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
+	IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
 		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
 							"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
@@ -2146,7 +1613,7 @@
 	 * then we reset the scan state machine and terminate,
 	 * re-queuing another scan if one has been requested */
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_INFO("Aborted scan completed.\n");
+		IWL_DEBUG_INFO(priv, "Aborted scan completed.\n");
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 	} else {
 		/* If there are more bands on this scan pass reschedule */
@@ -2156,11 +1623,11 @@
 
 	priv->last_scan_jiffies = jiffies;
 	priv->next_scan_jiffies = 0;
-	IWL_DEBUG_INFO("Setting scan to off\n");
+	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
 
 	clear_bit(STATUS_SCANNING, &priv->status);
 
-	IWL_DEBUG_INFO("Scan took %dms\n",
+	IWL_DEBUG_INFO(priv, "Scan took %dms\n",
 		jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
 
 	queue_work(priv->workqueue, &priv->scan_completed);
@@ -2181,7 +1648,7 @@
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
-	IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
+	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
 			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
 			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
 
@@ -2224,7 +1691,7 @@
 	priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
 	priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
 	priv->rx_handlers[REPLY_ERROR] = iwl3945_rx_reply_error;
-	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl3945_rx_csa;
+	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
 	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
 	    iwl3945_rx_spectrum_measure_notif;
 	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl3945_rx_pm_sleep_notif;
@@ -2642,7 +2109,7 @@
 		fill_rx = 1;
 	/* Rx interrupt, but nothing sent from uCode */
 	if (i == r)
-		IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
+		IWL_DEBUG(priv, IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
 
 	while (i != r) {
 		rxb = rxq->queue[i];
@@ -2673,13 +2140,13 @@
 		 *   handle those that need handling via function in
 		 *   rx_handlers table.  See iwl3945_setup_rx_handlers() */
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
-			IWL_DEBUG(IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
+			IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
 				"r = %d, i = %d, %s, 0x%02x\n", r, i,
 				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
-			IWL_DEBUG(IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
+			IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
 				"r %d i %d No handler needed for %s, 0x%02x\n",
 				r, i, get_cmd_string(pkt->hdr.cmd),
 				pkt->hdr.cmd);
@@ -2728,29 +2195,9 @@
 	iwl3945_rx_queue_restock(priv);
 }
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static void iwl3945_print_rx_config_cmd(struct iwl_priv *priv,
-					struct iwl3945_rxon_cmd *rxon)
-{
-	IWL_DEBUG_RADIO("RX CONFIG:\n");
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
-	IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
-	IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
-	IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
-			le32_to_cpu(rxon->filter_flags));
-	IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
-	IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
-			rxon->ofdm_basic_rates);
-	IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
-	IWL_DEBUG_RADIO("u8[6] node_addr: %pM\n", rxon->node_addr);
-	IWL_DEBUG_RADIO("u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
-	IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
-}
-#endif
-
 static void iwl3945_enable_interrupts(struct iwl_priv *priv)
 {
-	IWL_DEBUG_ISR("Enabling interrupts\n");
+	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
 	set_bit(STATUS_INT_ENABLED, &priv->status);
 	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
 }
@@ -2776,7 +2223,7 @@
 	 * from uCode or flow handler (Rx/Tx DMA) */
 	iwl_write32(priv, CSR_INT, 0xffffffff);
 	iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
-	IWL_DEBUG_ISR("Disabled interrupts\n");
+	IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
 }
 
 static const char *desc_lookup(int i)
@@ -2957,58 +2404,19 @@
 	iwl_release_nic_access(priv);
 }
 
-/**
- * iwl3945_irq_handle_error - called for HW or SW error interrupt from card
- */
-static void iwl3945_irq_handle_error(struct iwl_priv *priv)
-{
-	/* Set the FW error flag -- cleared on iwl3945_down */
-	set_bit(STATUS_FW_ERROR, &priv->status);
-
-	/* Cancel currently queued command. */
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & IWL_DL_FW_ERRORS) {
-		iwl3945_dump_nic_error_log(priv);
-		iwl3945_dump_nic_event_log(priv);
-		iwl3945_print_rx_config_cmd(priv, &priv->staging39_rxon);
-	}
-#endif
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	/* Keep the restart process from trying to send host
-	 * commands by clearing the INIT status bit */
-	clear_bit(STATUS_READY, &priv->status);
-
-	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS,
-			  "Restarting adapter due to uCode error.\n");
-
-		if (iwl3945_is_associated(priv)) {
-			memcpy(&priv->recovery39_rxon, &priv->active39_rxon,
-			       sizeof(priv->recovery39_rxon));
-			priv->error_recovering = 1;
-		}
-		if (priv->cfg->mod_params->restart_fw)
-			queue_work(priv->workqueue, &priv->restart);
-	}
-}
-
 static void iwl3945_error_recovery(struct iwl_priv *priv)
 {
 	unsigned long flags;
 
-	memcpy(&priv->staging39_rxon, &priv->recovery39_rxon,
-	       sizeof(priv->staging39_rxon));
-	priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
+	       sizeof(priv->staging_rxon));
+	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 	iwl3945_commit_rxon(priv);
 
 	iwl3945_add_station(priv, priv->bssid, 1, 0);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging39_rxon.assoc_id);
+	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
 	priv->error_recovering = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -3040,7 +2448,7 @@
 	if (priv->debug_level & IWL_DL_ISR) {
 		/* just for debug */
 		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
 			      inta, inta_mask, inta_fh);
 	}
 #endif
@@ -3061,7 +2469,7 @@
 		/* Tell the device to stop sending interrupts */
 		iwl3945_disable_interrupts(priv);
 
-		iwl3945_irq_handle_error(priv);
+		iwl_irq_handle_error(priv);
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
@@ -3074,12 +2482,12 @@
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
 		if (inta & CSR_INT_BIT_SCD)
-			IWL_DEBUG_ISR("Scheduler finished to transmit "
+			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
 
 		/* Alive notification via Rx interrupt will do the real work */
 		if (inta & CSR_INT_BIT_ALIVE)
-			IWL_DEBUG_ISR("Alive interrupt\n");
+			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -3089,13 +2497,13 @@
 	if (inta & CSR_INT_BIT_SW_ERR) {
 		IWL_ERR(priv, "Microcode SW error detected. "
 			"Restarting 0x%X.\n", inta);
-		iwl3945_irq_handle_error(priv);
+		iwl_irq_handle_error(priv);
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
 
 	/* uCode wakes up after power-down sleep */
 	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR("Wakeup interrupt\n");
+		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
 		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
 		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
@@ -3116,7 +2524,7 @@
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR("Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
 
 		iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
 		if (!iwl_grab_nic_access(priv)) {
@@ -3146,7 +2554,7 @@
 		inta = iwl_read32(priv, CSR_INT);
 		inta_mask = iwl_read32(priv, CSR_INT_MASK);
 		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+		IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
@@ -3178,7 +2586,7 @@
 	 * This may be due to IRQ shared with another device,
 	 * or due to sporadic interrupts thrown from our NIC. */
 	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
 		goto none;
 	}
 
@@ -3188,7 +2596,7 @@
 		goto unplugged;
 	}
 
-	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
 		      inta, inta_mask, inta_fh);
 
 	inta &= ~CSR_INT_BIT_SCD;
@@ -3242,7 +2650,7 @@
 
 		ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
+			IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -3290,7 +2698,7 @@
 			 */
 		}
 
-		IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
+		IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
 			       scan_ch->channel,
 			       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
 			       (scan_ch->type & 1) ?
@@ -3300,7 +2708,7 @@
 		added++;
 	}
 
-	IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
 	return added;
 }
 
@@ -3351,7 +2759,7 @@
 	int rc = 0;
 	u32 errcnt;
 
-	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
 	rc = iwl_grab_nic_access(priv);
 	if (rc)
@@ -3380,7 +2788,8 @@
 	iwl_release_nic_access(priv);
 
 	if (!errcnt)
-		IWL_DEBUG_INFO("ucode image in INSTRUCTION memory is good\n");
+		IWL_DEBUG_INFO(priv,
+			"ucode image in INSTRUCTION memory is good\n");
 
 	return rc;
 }
@@ -3398,7 +2807,7 @@
 	u32 errcnt = 0;
 	u32 i;
 
-	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
 	rc = iwl_grab_nic_access(priv);
 	if (rc)
@@ -3445,7 +2854,7 @@
 	len = priv->ucode_boot.len;
 	rc = iwl3945_verify_inst_sparse(priv, image, len);
 	if (rc == 0) {
-		IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -3454,7 +2863,7 @@
 	len = priv->ucode_init.len;
 	rc = iwl3945_verify_inst_sparse(priv, image, len);
 	if (rc == 0) {
-		IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -3463,7 +2872,7 @@
 	len = priv->ucode_code.len;
 	rc = iwl3945_verify_inst_sparse(priv, image, len);
 	if (rc == 0) {
-		IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
+		IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
 		return 0;
 	}
 
@@ -3522,7 +2931,8 @@
 					"which is deprecated. "
 					" Please use API v%u instead.\n",
 					  buf, api_max);
-			IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
+			IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
+				       "(%zd bytes) from disk\n",
 				       buf, ucode_raw->size);
 			break;
 		}
@@ -3573,13 +2983,18 @@
 		IWL_UCODE_API(priv->ucode_ver),
 		IWL_UCODE_SERIAL(priv->ucode_ver));
 
-	IWL_DEBUG_INFO("f/w package hdr ucode version raw = 0x%x\n",
+	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
 		       priv->ucode_ver);
-	IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
-	IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size);
-	IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size);
-	IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size);
-	IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
+		       inst_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
+		       data_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
+		       init_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
+		       init_data_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
+		       boot_size);
 
 
 	/* Verify size of file vs. image size info in file's header */
@@ -3587,40 +3002,43 @@
 		inst_size + data_size + init_size +
 		init_data_size + boot_size) {
 
-		IWL_DEBUG_INFO("uCode file size %d too small\n",
-			       (int)ucode_raw->size);
+		IWL_DEBUG_INFO(priv, "uCode file size %zd too small\n",
+			       ucode_raw->size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > IWL39_MAX_INST_SIZE) {
-		IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 
 	if (data_size > IWL39_MAX_DATA_SIZE) {
-		IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 			       data_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (init_size > IWL39_MAX_INST_SIZE) {
-		IWL_DEBUG_INFO("uCode init instr len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv,
+				"uCode init instr len %d too large to fit in\n",
 				init_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (init_data_size > IWL39_MAX_DATA_SIZE) {
-		IWL_DEBUG_INFO("uCode init data len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv,
+				"uCode init data len %d too large to fit in\n",
 				init_data_size);
 		ret = -EINVAL;
 		goto err_release;
 	}
 	if (boot_size > IWL39_MAX_BSM_SIZE) {
-		IWL_DEBUG_INFO("uCode boot instr len %d too large to fit in\n",
+		IWL_DEBUG_INFO(priv,
+				"uCode boot instr len %d too large to fit in\n",
 				boot_size);
 		ret = -EINVAL;
 		goto err_release;
@@ -3670,16 +3088,18 @@
 	/* Runtime instructions (first block of data in file) */
 	src = &ucode->data[0];
 	len = priv->ucode_code.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) uCode instr len %zd\n", len);
 	memcpy(priv->ucode_code.v_addr, src, len);
-	IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+	IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
 		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
 
 	/* Runtime data (2nd block)
 	 * NOTE:  Copy into backup buffer will be done in iwl3945_up()  */
 	src = &ucode->data[inst_size];
 	len = priv->ucode_data.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) uCode data len %zd\n", len);
 	memcpy(priv->ucode_data.v_addr, src, len);
 	memcpy(priv->ucode_data_backup.v_addr, src, len);
 
@@ -3687,8 +3107,8 @@
 	if (init_size) {
 		src = &ucode->data[inst_size + data_size];
 		len = priv->ucode_init.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
-			       len);
+		IWL_DEBUG_INFO(priv,
+			"Copying (but not loading) init instr len %zd\n", len);
 		memcpy(priv->ucode_init.v_addr, src, len);
 	}
 
@@ -3696,16 +3116,16 @@
 	if (init_data_size) {
 		src = &ucode->data[inst_size + data_size + init_size];
 		len = priv->ucode_init_data.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
-			       (int)len);
+		IWL_DEBUG_INFO(priv,
+			"Copying (but not loading) init data len %zd\n", len);
 		memcpy(priv->ucode_init_data.v_addr, src, len);
 	}
 
 	/* Bootstrap instructions (5th block) */
 	src = &ucode->data[inst_size + data_size + init_size + init_data_size];
 	len = priv->ucode_boot.len;
-	IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
-		       (int)len);
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) boot instr len %zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
 	/* We have our copies now, allow OS release its copies */
@@ -3767,7 +3187,7 @@
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
+	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
 	return rc;
 }
@@ -3785,7 +3205,7 @@
 	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
 		/* We had an error bringing up the hardware, so take it
 		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Initialize Alive failed.\n");
+		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
 		goto restart;
 	}
 
@@ -3795,18 +3215,18 @@
 	if (iwl3945_verify_ucode(priv)) {
 		/* Runtime instruction load was bad;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
+		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
 		goto restart;
 	}
 
 	/* Send pointers to protocol/runtime uCode image ... init code will
 	 * load and launch runtime uCode, which will send us another "Alive"
 	 * notification. */
-	IWL_DEBUG_INFO("Initialization Alive received.\n");
+	IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 	if (iwl3945_set_ucode_ptrs(priv)) {
 		/* Runtime instruction load won't happen;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
+		IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
 		goto restart;
 	}
 	return;
@@ -3831,12 +3251,12 @@
 	int thermal_spin = 0;
 	u32 rfkill;
 
-	IWL_DEBUG_INFO("Runtime Alive received.\n");
+	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 
 	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
 		/* We had an error bringing up the hardware, so take it
 		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Alive failed.\n");
+		IWL_DEBUG_INFO(priv, "Alive failed.\n");
 		goto restart;
 	}
 
@@ -3846,7 +3266,7 @@
 	if (iwl3945_verify_ucode(priv)) {
 		/* Runtime instruction load was bad;
 		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad runtime uCode load.\n");
+		IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
 		goto restart;
 	}
 
@@ -3859,7 +3279,7 @@
 	}
 
 	rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
-	IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill);
+	IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
 	iwl_release_nic_access(priv);
 
 	if (rfkill & 0x1) {
@@ -3872,7 +3292,7 @@
 		}
 
 		if (thermal_spin)
-			IWL_DEBUG_INFO("Thermal calibration took %dus\n",
+			IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
 				       thermal_spin * 10);
 	} else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -3891,19 +3311,18 @@
 	priv->active_rate = priv->rates_mask;
 	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
 
-	iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode));
+	iwl_power_update_mode(priv, false);
 
-	if (iwl3945_is_associated(priv)) {
+	if (iwl_is_associated(priv)) {
 		struct iwl3945_rxon_cmd *active_rxon =
-				(struct iwl3945_rxon_cmd *)(&priv->active39_rxon);
+				(struct iwl3945_rxon_cmd *)(&priv->active_rxon);
 
-		memcpy(&priv->staging39_rxon, &priv->active39_rxon,
-		       sizeof(priv->staging39_rxon));
+		memcpy(&priv->staging_rxon, &priv->active_rxon,
+		       sizeof(priv->staging_rxon));
 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 	} else {
 		/* Initialize our rx_config data */
-		iwl3945_connection_init_rx_config(priv, priv->iw_mode);
-		memcpy(priv->staging39_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+		iwl_connection_init_rx_config(priv, priv->iw_mode);
 	}
 
 	/* Configure Bluetooth device coexistence support */
@@ -3916,7 +3335,7 @@
 
 	iwl3945_led_register(priv);
 
-	IWL_DEBUG_INFO("ALIVE processing complete.\n");
+	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
@@ -3945,7 +3364,7 @@
 	int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
 	struct ieee80211_conf *conf = NULL;
 
-	IWL_DEBUG_INFO(DRV_NAME " is going down\n");
+	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -4132,7 +3551,7 @@
 		/* start card; "initialize" will load runtime ucode */
 		iwl3945_nic_start(priv);
 
-		IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
+		IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
 
 		return 0;
 	}
@@ -4233,34 +3652,36 @@
 	/* This should never be called or scheduled if there is currently
 	 * a scan active in the hardware. */
 	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
-		IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
-			       "Ignoring second request.\n");
+		IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests  "
+				"Ignoring second request.\n");
 		rc = -EIO;
 		goto done;
 	}
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+		IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
 		goto done;
 	}
 
 	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
+		IWL_DEBUG_HC(priv,
+			"Scan request while abort pending. Queuing.\n");
 		goto done;
 	}
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+		IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
 		goto done;
 	}
 
 	if (!test_bit(STATUS_READY, &priv->status)) {
-		IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n");
+		IWL_DEBUG_HC(priv,
+			"Scan request while uninitialized. Queuing.\n");
 		goto done;
 	}
 
 	if (!priv->scan_bands) {
-		IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+		IWL_DEBUG_HC(priv, "Aborting scan due to no requested bands\n");
 		goto done;
 	}
 
@@ -4278,14 +3699,14 @@
 	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
 	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
 
-	if (iwl3945_is_associated(priv)) {
+	if (iwl_is_associated(priv)) {
 		u16 interval = 0;
 		u32 extra;
 		u32 suspend_time = 100;
 		u32 scan_suspend_time = 100;
 		unsigned long flags;
 
-		IWL_DEBUG_INFO("Scanning while associated...\n");
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
 
 		spin_lock_irqsave(&priv->lock, flags);
 		interval = priv->beacon_int;
@@ -4307,15 +3728,14 @@
 		    (extra | ((suspend_time % interval) * 1024));
 
 		scan->suspend_time = cpu_to_le32(scan_suspend_time);
-		IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
 			       scan_suspend_time, interval);
 	}
 
 	/* We should add the ability for user to lock to PASSIVE ONLY */
 	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN
-		    ("Kicking off one direct scan for '%s'\n",
-		     print_ssid(ssid, priv->direct_ssid,
+		IWL_DEBUG_SCAN(priv, "Kicking off one direct scan for '%s'\n",
+				print_ssid(ssid, priv->direct_ssid,
 				priv->direct_ssid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->direct_ssid_len;
@@ -4323,7 +3743,7 @@
 		       priv->direct_ssid, priv->direct_ssid_len);
 		n_probes++;
 	} else
-		IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
+		IWL_DEBUG_SCAN(priv, "Kicking off one indirect scan.\n");
 
 	/* We don't build a direct scan probe request; the uCode will do
 	 * that based on the direct_mask added to each channel entry */
@@ -4364,7 +3784,7 @@
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
-		IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
 		goto done;
 	}
 
@@ -4448,8 +3868,8 @@
 	}
 
 
-	IWL_DEBUG_ASSOC("Associated as %d to: %pM\n",
-			priv->assoc_id, priv->active39_rxon.bssid_addr);
+	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
+			priv->assoc_id, priv->active_rxon.bssid_addr);
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
@@ -4461,7 +3881,7 @@
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
-	priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 	iwl3945_commit_rxon(priv);
 
 	memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
@@ -4472,26 +3892,26 @@
 		IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
 			    "Attempting to continue.\n");
 
-	priv->staging39_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
+	priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
 
-	priv->staging39_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
+	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
 
-	IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
+	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
 			priv->assoc_id, priv->beacon_int);
 
 	if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-		priv->staging39_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
 	else
-		priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
 
-	if (priv->staging39_rxon.flags & RXON_FLG_BAND_24G_MSK) {
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
 		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-			priv->staging39_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
 		else
-			priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
 
 		if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
-			priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
 
 	}
 
@@ -4542,12 +3962,12 @@
 	struct iwl_priv *priv = hw->priv;
 	int ret;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
 
-	memset(&priv->staging39_rxon, 0, sizeof(struct iwl3945_rxon_cmd));
+	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
 	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
 	 * ucode filename and max sizes are card-specific. */
 
@@ -4569,7 +3989,7 @@
 	if (ret)
 		goto out_release_irq;
 
-	IWL_DEBUG_INFO("Start UP work.\n");
+	IWL_DEBUG_INFO(priv, "Start UP work.\n");
 
 	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
 		return 0;
@@ -4594,12 +4014,12 @@
 	cancel_delayed_work(&priv->rfkill_poll);
 
 	priv->is_open = 1;
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 
 out_release_irq:
 	priv->is_open = 0;
-	IWL_DEBUG_MAC80211("leave - failed\n");
+	IWL_DEBUG_MAC80211(priv, "leave - failed\n");
 	return ret;
 }
 
@@ -4607,10 +4027,10 @@
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211("leave - skip\n");
+		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
 		return;
 	}
 
@@ -4633,22 +4053,22 @@
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
 			   round_jiffies_relative(2 * HZ));
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
-	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+	IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
 	if (iwl3945_tx_skb(priv, skb))
 		dev_kfree_skb_any(skb);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return NETDEV_TX_OK;
 }
 
@@ -4658,10 +4078,10 @@
 	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
+	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
 
 	if (priv->vif) {
-		IWL_DEBUG_MAC80211("leave - vif != NULL\n");
+		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -4674,7 +4094,7 @@
 	mutex_lock(&priv->mutex);
 
 	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211("Set: %pM\n", conf->mac_addr);
+		IWL_DEBUG_MAC80211(priv, "Set: %pM\n", conf->mac_addr);
 		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
 	}
 
@@ -4683,7 +4103,7 @@
 
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
 
@@ -4703,17 +4123,18 @@
 	int ret = 0;
 
 	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d\n",
+				conf->channel->hw_value);
 
 	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		ret = -EIO;
 		goto out;
 	}
 
 	if (unlikely(!iwl3945_mod_params.disable_hw_scan &&
 		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211("leave - scanning\n");
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
 		set_bit(STATUS_CONF_PENDING, &priv->status);
 		mutex_unlock(&priv->mutex);
 		return 0;
@@ -4724,22 +4145,23 @@
 	ch_info = iwl_get_channel_info(priv, conf->channel->band,
 				       conf->channel->hw_value);
 	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
-			       conf->channel->hw_value, conf->channel->band);
-		IWL_DEBUG_MAC80211("leave - invalid channel\n");
+		IWL_DEBUG_SCAN(priv,
+				"Channel %d [%d] is INVALID for this band.\n",
+				conf->channel->hw_value, conf->channel->band);
+		IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
 		spin_unlock_irqrestore(&priv->lock, flags);
 		ret = -EINVAL;
 		goto out;
 	}
 
-	iwl3945_set_rxon_channel(priv, conf->channel->band, conf->channel->hw_value);
+	iwl_set_rxon_channel(priv, conf->channel);
 
-	iwl3945_set_flags_for_phymode(priv, conf->channel->band);
+	iwl_set_flags_for_band(priv, conf->channel->band);
 
 	/* The list of supported rates and rate mask can be different
 	 * for each phymode; since the phymode may have changed, reset
 	 * the rate mask to what mac80211 lists */
-	iwl3945_set_rate(priv);
+	iwl_set_rate(priv);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -4753,25 +4175,25 @@
 	iwl3945_radio_kill_sw(priv, !conf->radio_enabled);
 
 	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211("leave - radio disabled\n");
+		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
 		goto out;
 	}
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF kill\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
 		ret = -EIO;
 		goto out;
 	}
 
-	iwl3945_set_rate(priv);
+	iwl_set_rate(priv);
 
-	if (memcmp(&priv->active39_rxon,
-		   &priv->staging39_rxon, sizeof(priv->staging39_rxon)))
+	if (memcmp(&priv->active_rxon,
+		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
 		iwl3945_commit_rxon(priv);
 	else
-		IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
+		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration\n");
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 out:
 	clear_bit(STATUS_CONF_PENDING, &priv->status);
@@ -4787,10 +4209,10 @@
 		return;
 
 	/* The following should be done only at AP bring up */
-	if (!(iwl3945_is_associated(priv))) {
+	if (!(iwl_is_associated(priv))) {
 
 		/* RXON - unassoc (to set timing command) */
-		priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 
 		/* RXON Timing */
@@ -4804,29 +4226,29 @@
 					"Attempting to continue.\n");
 
 		/* FIXME: what should be the assoc_id for AP? */
-		priv->staging39_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
+		priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
 		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-			priv->staging39_rxon.flags |=
+			priv->staging_rxon.flags |=
 				RXON_FLG_SHORT_PREAMBLE_MSK;
 		else
-			priv->staging39_rxon.flags &=
+			priv->staging_rxon.flags &=
 				~RXON_FLG_SHORT_PREAMBLE_MSK;
 
-		if (priv->staging39_rxon.flags & RXON_FLG_BAND_24G_MSK) {
+		if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
 			if (priv->assoc_capability &
 				WLAN_CAPABILITY_SHORT_SLOT_TIME)
-				priv->staging39_rxon.flags |=
+				priv->staging_rxon.flags |=
 					RXON_FLG_SHORT_SLOT_MSK;
 			else
-				priv->staging39_rxon.flags &=
+				priv->staging_rxon.flags &=
 					~RXON_FLG_SHORT_SLOT_MSK;
 
 			if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
-				priv->staging39_rxon.flags &=
+				priv->staging_rxon.flags &=
 					~RXON_FLG_SHORT_SLOT_MSK;
 		}
 		/* restore RXON assoc */
-		priv->staging39_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 		iwl3945_add_station(priv, iwl_bcast_addr, 0, 0);
 	}
@@ -4848,7 +4270,7 @@
 		return -EIO;
 
 	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
+		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
 		return 0;
 	}
 
@@ -4871,7 +4293,7 @@
 	mutex_lock(&priv->mutex);
 
 	if (conf->bssid)
-		IWL_DEBUG_MAC80211("bssid: %pM\n", conf->bssid);
+		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
 
 /*
  * very dubious code was here; the probe filtering flag is never set:
@@ -4884,7 +4306,7 @@
 		if (!conf->bssid) {
 			conf->bssid = priv->mac_addr;
 			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211("bssid was set to: %pM\n",
+			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
 					   conf->bssid);
 		}
 		if (priv->ibss_beacon)
@@ -4903,11 +4325,11 @@
 		if (iwl_scan_cancel_timeout(priv, 100)) {
 			IWL_WARN(priv, "Aborted scan still in progress "
 				    "after 100ms\n");
-			IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+			IWL_DEBUG_MAC80211(priv, "leaving:scan abort failed\n");
 			mutex_unlock(&priv->mutex);
 			return -EAGAIN;
 		}
-		memcpy(priv->staging39_rxon.bssid_addr, conf->bssid, ETH_ALEN);
+		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
 
 		/* TODO: Audit driver for usage of these members and see
 		 * if mac80211 deprecates them (priv->bssid looks like it
@@ -4921,80 +4343,34 @@
 			rc = iwl3945_commit_rxon(priv);
 			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
 				iwl3945_add_station(priv,
-					priv->active39_rxon.bssid_addr, 1, 0);
+					priv->active_rxon.bssid_addr, 1, 0);
 		}
 
 	} else {
 		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 	}
 
  done:
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
 
-static void iwl3945_configure_filter(struct ieee80211_hw *hw,
-				 unsigned int changed_flags,
-				 unsigned int *total_flags,
-				 int mc_count, struct dev_addr_list *mc_list)
-{
-	struct iwl_priv *priv = hw->priv;
-	__le32 *filter_flags = &priv->staging39_rxon.filter_flags;
-
-	IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
-			changed_flags, *total_flags);
-
-	if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) {
-		if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS))
-			*filter_flags |= RXON_FILTER_PROMISC_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_PROMISC_MSK;
-	}
-	if (changed_flags & FIF_ALLMULTI) {
-		if (*total_flags & FIF_ALLMULTI)
-			*filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK;
-	}
-	if (changed_flags & FIF_CONTROL) {
-		if (*total_flags & FIF_CONTROL)
-			*filter_flags |= RXON_FILTER_CTL2HOST_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_CTL2HOST_MSK;
-	}
-	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
-		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
-			*filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
-		else
-			*filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK;
-	}
-
-	/* We avoid iwl_commit_rxon here to commit the new filter flags
-	 * since mac80211 will call ieee80211_hw_config immediately.
-	 * (mc_list is not supported at this time). Otherwise, we need to
-	 * queue a background iwl_commit_rxon work.
-	 */
-
-	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
-			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
 static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	mutex_lock(&priv->mutex);
 
 	if (iwl_is_ready_rf(priv)) {
 		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 	}
 	if (priv->vif == conf->vif) {
@@ -5003,7 +4379,7 @@
 	}
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
@@ -5015,27 +4391,29 @@
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("changes = 0x%X\n", changes);
+	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
 
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
+		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
 				   bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
-			priv->staging39_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
 		else
-			priv->staging39_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+			priv->staging_rxon.flags &=
+				~RXON_FLG_SHORT_PREAMBLE_MSK;
 	}
 
 	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
+		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n",
+				   bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging39_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
 		else
-			priv->staging39_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
 	}
 
 	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc);
+		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
 		/* This should never happen as this function should
 		 * never be called from interrupt context. */
 		if (WARN_ON_ONCE(in_interrupt()))
@@ -5053,10 +4431,12 @@
 			mutex_unlock(&priv->mutex);
 		} else {
 			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc);
+			IWL_DEBUG_MAC80211(priv,
+					"DISASSOC %d\n", bss_conf->assoc);
 		}
-	} else if (changes && iwl3945_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211("Associated Changes %d\n", changes);
+	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+			IWL_DEBUG_MAC80211(priv,
+					"Associated Changes %d\n", changes);
 			iwl3945_send_rxon_assoc(priv);
 	}
 
@@ -5069,14 +4449,14 @@
 	struct iwl_priv *priv = hw->priv;
 	DECLARE_SSID_BUF(ssid_buf);
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	mutex_lock(&priv->mutex);
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!iwl_is_ready_rf(priv)) {
 		rc = -EIO;
-		IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready or exit pending\n");
 		goto out_unlock;
 	}
 
@@ -5094,8 +4474,8 @@
 		goto out_unlock;
 	}
 	if (len) {
-		IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
-			       print_ssid(ssid_buf, ssid, len), (int)len);
+		IWL_DEBUG_SCAN(priv, "direct scan for %s [%zd]\n ",
+			       print_ssid(ssid_buf, ssid, len), len);
 
 		priv->one_direct_scan = 1;
 		priv->direct_ssid_len = (u8)
@@ -5106,7 +4486,7 @@
 
 	rc = iwl3945_scan_initiate(priv);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 out_unlock:
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -5125,17 +4505,17 @@
 	int ret;
 	u8 sta_id;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (iwl3945_mod_params.sw_crypto) {
-		IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
+		IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
 		return -EOPNOTSUPP;
 	}
 
 	addr = sta ? sta->addr : iwl_bcast_addr;
 	sta_id = iwl3945_hw_find_station(priv, addr);
 	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_MAC80211("leave - %pM not in station map.\n",
+		IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 				   addr);
 		return -EINVAL;
 	}
@@ -5148,26 +4528,27 @@
 	case  SET_KEY:
 		ret = iwl3945_update_sta_key_info(priv, key, sta_id);
 		if (!ret) {
-			iwl3945_set_rxon_hwcrypto(priv, 1);
+			iwl_set_rxon_hwcrypto(priv, 1);
 			iwl3945_commit_rxon(priv);
 			key->hw_key_idx = sta_id;
-			IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
+			IWL_DEBUG_MAC80211(priv,
+				"set_key success, using hwcrypto\n");
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 		}
 		break;
 	case DISABLE_KEY:
 		ret = iwl3945_clear_sta_key_info(priv, sta_id);
 		if (!ret) {
-			iwl3945_set_rxon_hwcrypto(priv, 0);
+			iwl_set_rxon_hwcrypto(priv, 0);
 			iwl3945_commit_rxon(priv);
-			IWL_DEBUG_MAC80211("disable hwcrypto key\n");
+			IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
 		}
 		break;
 	default:
 		ret = -EINVAL;
 	}
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	mutex_unlock(&priv->mutex);
 
 	return ret;
@@ -5180,15 +4561,15 @@
 	unsigned long flags;
 	int q;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
 	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
 		return 0;
 	}
 
@@ -5210,12 +4591,12 @@
 	mutex_lock(&priv->mutex);
 	if (priv->iw_mode == NL80211_IFTYPE_AP)
 		iwl3945_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl3945_is_associated(priv))
+	else if (priv->assoc_id && iwl_is_associated(priv))
 		iwl3945_activate_qos(priv, 0);
 
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
 
@@ -5228,10 +4609,10 @@
 	struct iwl_queue *q;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
@@ -5249,7 +4630,7 @@
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 	return 0;
 }
@@ -5260,7 +4641,7 @@
 	unsigned long flags;
 
 	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	iwl_reset_qos(priv);
 
@@ -5282,7 +4663,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}
@@ -5292,23 +4673,23 @@
 	*/
 	if (priv->iw_mode != NL80211_IFTYPE_AP) {
 		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging39_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 	}
 
 	/* Per mac80211.h: This is only used in IBSS mode... */
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
 
-		IWL_DEBUG_MAC80211("leave - not in IBSS\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}
 
-	iwl3945_set_rate(priv);
+	iwl_set_rate(priv);
 
 	mutex_unlock(&priv->mutex);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 }
 
@@ -5317,15 +4698,15 @@
 	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
 		return -EIO;
 	}
 
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211("leave - not IBSS\n");
+		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
 		return -EIO;
 	}
 
@@ -5338,7 +4719,7 @@
 
 	priv->assoc_id = 0;
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	iwl_reset_qos(priv);
@@ -5437,7 +4818,7 @@
 {
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
 
-	return sprintf(buf, "0x%04X\n", priv->active39_rxon.flags);
+	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
 }
 
 static ssize_t store_flags(struct device *d,
@@ -5448,14 +4829,14 @@
 	u32 flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(priv->staging39_rxon.flags) != flags) {
+	if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
 		/* Cancel any currently running scans... */
 		if (iwl_scan_cancel_timeout(priv, 100))
 			IWL_WARN(priv, "Could not cancel scan.\n");
 		else {
-			IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
+			IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
 				       flags);
-			priv->staging39_rxon.flags = cpu_to_le32(flags);
+			priv->staging_rxon.flags = cpu_to_le32(flags);
 			iwl3945_commit_rxon(priv);
 		}
 	}
@@ -5472,7 +4853,7 @@
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
 
 	return sprintf(buf, "0x%04X\n",
-		le32_to_cpu(priv->active39_rxon.filter_flags));
+		le32_to_cpu(priv->active_rxon.filter_flags));
 }
 
 static ssize_t store_filter_flags(struct device *d,
@@ -5483,14 +4864,14 @@
 	u32 filter_flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(priv->staging39_rxon.filter_flags) != filter_flags) {
+	if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
 		/* Cancel any currently running scans... */
 		if (iwl_scan_cancel_timeout(priv, 100))
 			IWL_WARN(priv, "Could not cancel scan.\n");
 		else {
-			IWL_DEBUG_INFO("Committing rxon.filter_flags = "
+			IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
 				       "0x%04X\n", filter_flags);
-			priv->staging39_rxon.filter_flags =
+			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
 			iwl3945_commit_rxon(priv);
 		}
@@ -5543,7 +4924,7 @@
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	struct ieee80211_measurement_params params = {
-		.channel = le16_to_cpu(priv->active39_rxon.channel),
+		.channel = le16_to_cpu(priv->active_rxon.channel),
 		.start_time = cpu_to_le64(priv->last_tsf),
 		.duration = cpu_to_le16(1),
 	};
@@ -5565,7 +4946,7 @@
 			type = simple_strtoul(p + 1, NULL, 0);
 	}
 
-	IWL_DEBUG_INFO("Invoking measurement of type %d on "
+	IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
 		       "channel %d (for '%s')\n", type, params.channel, buf);
 	iwl3945_get_measurement(priv, &params, type);
 
@@ -5599,44 +4980,70 @@
 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
 		   store_retry_rate);
 
+
 static ssize_t store_power_level(struct device *d,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int rc;
-	int mode;
+	int ret;
+	unsigned long mode;
 
-	mode = simple_strtoul(buf, NULL, 0);
+
 	mutex_lock(&priv->mutex);
 
 	if (!iwl_is_ready(priv)) {
-		rc = -EAGAIN;
+		ret = -EAGAIN;
 		goto out;
 	}
 
-	if ((mode < 1) || (mode > IWL39_POWER_LIMIT) ||
-	    (mode == IWL39_POWER_AC))
-		mode = IWL39_POWER_AC;
-	else
-		mode |= IWL_POWER_ENABLED;
+	ret = strict_strtoul(buf, 10, &mode);
+	if (ret)
+		goto out;
 
-	if (mode != priv->power_mode) {
-		rc = iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(mode));
-		if (rc) {
-			IWL_DEBUG_MAC80211("failed setting power mode.\n");
-			goto out;
-		}
-		priv->power_mode = mode;
+	ret = iwl_power_set_user_mode(priv, mode);
+	if (ret) {
+		IWL_DEBUG_MAC80211(priv, "failed setting power mode.\n");
+		goto out;
 	}
-
-	rc = count;
+	ret = count;
 
  out:
 	mutex_unlock(&priv->mutex);
-	return rc;
+	return ret;
 }
 
+static ssize_t show_power_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	int mode = priv->power_data.user_power_setting;
+	int system = priv->power_data.system_power_setting;
+	int level = priv->power_data.power_mode;
+	char *p = buf;
+
+	switch (system) {
+	case IWL_POWER_SYS_AUTO:
+		p += sprintf(p, "SYSTEM:auto");
+		break;
+	case IWL_POWER_SYS_AC:
+		p += sprintf(p, "SYSTEM:ac");
+		break;
+	case IWL_POWER_SYS_BATTERY:
+		p += sprintf(p, "SYSTEM:battery");
+		break;
+	}
+
+	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
+			"fixed" : "auto");
+	p += sprintf(p, "\tINDEX:%d", level);
+	p += sprintf(p, "\n");
+	return p - buf + 1;
+}
+
+static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR,
+		   show_power_level, store_power_level);
+
 #define MAX_WX_STRING 80
 
 /* Values are in microsecond */
@@ -5655,41 +5062,6 @@
 	1000000
 };
 
-static ssize_t show_power_level(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	int level = IWL_POWER_LEVEL(priv->power_mode);
-	char *p = buf;
-
-	p += sprintf(p, "%d ", level);
-	switch (level) {
-	case IWL_POWER_MODE_CAM:
-	case IWL39_POWER_AC:
-		p += sprintf(p, "(AC)");
-		break;
-	case IWL39_POWER_BATTERY:
-		p += sprintf(p, "(BATTERY)");
-		break;
-	default:
-		p += sprintf(p,
-			     "(Timeout %dms, Period %dms)",
-			     timeout_duration[level - 1] / 1000,
-			     period_duration[level - 1] / 1000);
-	}
-
-	if (!(priv->power_mode & IWL_POWER_ENABLED))
-		p += sprintf(p, " OFF\n");
-	else
-		p += sprintf(p, " \n");
-
-	return p - buf + 1;
-
-}
-
-static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
-		   store_power_level);
-
 static ssize_t show_channels(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
@@ -5752,22 +5124,22 @@
 			     struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
+	struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
 	int ant;
-	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (count == 0)
 		return 0;
 
 	if (sscanf(buf, "%1i", &ant) != 1) {
-		IWL_DEBUG_INFO("not in hex or decimal form.\n");
+		IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
 		return count;
 	}
 
 	if ((ant >= 0) && (ant <= 2)) {
-		IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant);
+		IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
 		iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
 	} else
-		IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant);
+		IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
 
 
 	return count;
@@ -5890,7 +5262,7 @@
 	.remove_interface = iwl3945_mac_remove_interface,
 	.config = iwl3945_mac_config,
 	.config_interface = iwl3945_mac_config_interface,
-	.configure_filter = iwl3945_configure_filter,
+	.configure_filter = iwl_configure_filter,
 	.set_key = iwl3945_mac_set_key,
 	.get_tx_stats = iwl3945_mac_get_tx_stats,
 	.conf_tx = iwl3945_mac_conf_tx,
@@ -5932,8 +5304,8 @@
 	priv->qos_data.qos_cap.val = 0;
 
 	priv->rates_mask = IWL_RATES_MASK;
-	/* If power management is turned on, default to AC mode */
-	priv->power_mode = IWL39_POWER_AC;
+	/* If power management is turned on, default to CAM mode */
+	priv->power_mode = IWL_POWER_MODE_CAM;
 	priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
 
 	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
@@ -6014,12 +5386,12 @@
 	 * "the hard way", rather than using device's scan.
 	 */
 	if (iwl3945_mod_params.disable_hw_scan) {
-		IWL_DEBUG_INFO("Disabling hw_scan\n");
+		IWL_DEBUG_INFO(priv, "Disabling hw_scan\n");
 		iwl3945_hw_ops.hw_scan = NULL;
 	}
 
 
-	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
+	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
 
@@ -6075,9 +5447,9 @@
 		goto out_pci_release_regions;
 	}
 
-	IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
+	IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
 			(unsigned long long) pci_resource_len(pdev, 0));
-	IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
+	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
 
 	/* We disable the RETRY_TIMEOUT register (0x41) to keep
 	 * PCI Tx retries from interfering with C3 CPU state */
@@ -6086,7 +5458,7 @@
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
-		IWL_DEBUG_INFO("Failed to init APMG\n");
+		IWL_DEBUG_INFO(priv, "Failed to init APMG\n");
 		goto out_iounmap;
 	}
 
@@ -6103,7 +5475,7 @@
 	/* MAC Address location in EEPROM same for 3945/4965 */
 	eeprom = (struct iwl3945_eeprom *)priv->eeprom;
 	memcpy(priv->mac_addr, eeprom->mac_address, ETH_ALEN);
-	IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr);
+	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
 	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
 
 	/***********************
@@ -6136,7 +5508,7 @@
 	/* Disable radio (SW RF KILL) via parameter when loading driver */
 	if (iwl3945_mod_params.disable) {
 		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO("Radio disabled.\n");
+		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
 	}
 
 
@@ -6163,7 +5535,8 @@
 		goto out_release_irq;
 	}
 
-	iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
+	iwl_set_rxon_channel(priv,
+			     &priv->bands[IEEE80211_BAND_2GHZ].channels[5]);
 	iwl3945_setup_deferred_work(priv);
 	iwl3945_setup_rx_handlers(priv);
 
@@ -6224,7 +5597,7 @@
 	if (!priv)
 		return;
 
-	IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
+	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
 
 	set_bit(STATUS_EXIT_PENDING, &priv->status);
 
@@ -6305,9 +5678,12 @@
 static int iwl3945_pci_resume(struct pci_dev *pdev)
 {
 	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	int ret;
 
 	pci_set_power_state(pdev, PCI_D0);
-	pci_enable_device(pdev);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 	pci_restore_state(pdev);
 
 	if (priv->is_open)
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 7c02ea3..07311e7 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -42,6 +42,7 @@
 struct if_spi_card {
 	struct spi_device		*spi;
 	struct lbs_private		*priv;
+	struct libertas_spi_platform_data *pdata;
 
 	char				helper_fw_name[FIRMWARE_NAME_MAX];
 	char				main_fw_name[FIRMWARE_NAME_MAX];
@@ -1022,6 +1023,17 @@
 
 	lbs_deb_enter(LBS_DEB_SPI);
 
+	if (!pdata) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (pdata->setup) {
+		err = pdata->setup(spi);
+		if (err)
+			goto out;
+	}
+
 	/* Allocate card structure to represent this specific device */
 	card = kzalloc(sizeof(struct if_spi_card), GFP_KERNEL);
 	if (!card) {
@@ -1029,6 +1041,7 @@
 		goto out;
 	}
 	spi_set_drvdata(spi, card);
+	card->pdata = pdata;
 	card->spi = spi;
 	card->gpio_cs = pdata->gpio_cs;
 	card->prev_xfer_time = jiffies;
@@ -1158,6 +1171,8 @@
 	if_spi_terminate_spi_thread(card);
 	lbs_remove_card(priv); /* will call free_netdev */
 	gpio_free(card->gpio_cs);
+	if (card->pdata->teardown)
+		card->pdata->teardown(spi);
 	free_if_spi_card(card);
 	lbs_deb_leave(LBS_DEB_SPI);
 	return 0;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 57f6c12..00a57ed 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -692,7 +692,7 @@
 					    bss->wpa_ie_len);
 			} else if (pos[1] >= MARVELL_MESH_IE_LENGTH &&
 				   pos[2] == 0x00 && pos[3] == 0x50 &&
-				   pos[4] == 0x43 && pos[4] == 0x04) {
+				   pos[4] == 0x43 && pos[5] == 0x04) {
 				lbs_deb_scan("got mesh IE\n");
 				bss->mesh = 1;
 			} else {
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index 28f1cae..5582dca 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -4,9 +4,9 @@
  * card.
  *
  * Copyright notice & release notes in file orinoco.c
- * 
+ *
  * Note specific to airport stub:
- * 
+ *
  *  0.05 : first version of the new split driver
  *  0.06 : fix possible hang on powerup, add sleep support
  */
@@ -60,7 +60,8 @@
 	orinoco_unlock(priv, &flags);
 
 	disable_irq(dev->irq);
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(mdev), 0, 0);
 
 	return 0;
 }
@@ -75,7 +76,8 @@
 
 	printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
 
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(mdev), 0, 1);
 	msleep(200);
 
 	enable_irq(dev->irq);
@@ -93,7 +95,7 @@
 
 	priv->hw_unavailable--;
 
-	if (priv->open && (! priv->hw_unavailable)) {
+	if (priv->open && (!priv->hw_unavailable)) {
 		err = __orinoco_up(dev);
 		if (err)
 			printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
@@ -127,7 +129,8 @@
 
 	macio_release_resource(mdev, 0);
 
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(mdev), 0, 0);
 	ssleep(1);
 
 	macio_set_drvdata(mdev, NULL);
@@ -153,9 +156,11 @@
 	 * off. */
 	disable_irq(dev->irq);
 
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(card->mdev), 0, 0);
 	ssleep(1);
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(card->mdev), 0, 1);
 	ssleep(1);
 
 	enable_irq(dev->irq);
@@ -182,7 +187,7 @@
 	/* Allocate space for private device-specific data */
 	dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
 			       airport_hard_reset, NULL);
-	if (! dev) {
+	if (!dev) {
 		printk(KERN_ERR PFX "Cannot allocate network device\n");
 		return -ENODEV;
 	}
@@ -214,9 +219,10 @@
 	}
 
 	hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
-		
+
 	/* Power up card */
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
+			  macio_get_of_node(mdev), 0, 1);
 	ssleep(1);
 
 	/* Reset it before we get the interrupt */
@@ -248,7 +254,7 @@
 MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
 MODULE_LICENSE("Dual MPL/GPL");
 
-static struct of_device_id airport_match[] = 
+static struct of_device_id airport_match[] =
 {
 	{
 	.name 		= "radio",
@@ -256,10 +262,9 @@
 	{},
 };
 
-MODULE_DEVICE_TABLE (of, airport_match);
+MODULE_DEVICE_TABLE(of, airport_match);
 
-static struct macio_driver airport_driver = 
-{
+static struct macio_driver airport_driver = {
 	.name 		= DRIVER_NAME,
 	.match_table	= airport_match,
 	.probe		= airport_attach,
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
index bfa3753..f48358f 100644
--- a/drivers/net/wireless/orinoco/hermes.c
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -15,7 +15,7 @@
  *
  * Copyright (C) 2000, David Gibson, Linuxcare Australia.
  * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- * 
+ *
  * The contents of this file are subject to the Mozilla Public License
  * Version 1.1 (the "License"); you may not use this file except in
  * compliance with the License. You may obtain a copy of the License
@@ -45,7 +45,8 @@
 
 #include "hermes.h"
 
-MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
+MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset"
+		   " and Prism II HFA384x wireless MAC controller");
 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
 	" & David Gibson <hermes@gibson.dropbear.id.au>");
 MODULE_LICENSE("Dual MPL/GPL");
@@ -61,13 +62,13 @@
  */
 
 #define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
-			printk(stuff);} while (0)
+			printk(stuff); } while (0)
 
 #undef HERMES_DEBUG
 #ifdef HERMES_DEBUG
 #include <stdarg.h>
 
-#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
+#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff)
 
 #else /* ! HERMES_DEBUG */
 
@@ -95,20 +96,19 @@
 
 	/* First wait for the command register to unbusy */
 	reg = hermes_read_regn(hw, CMD);
-	while ( (reg & HERMES_CMD_BUSY) && k ) {
+	while ((reg & HERMES_CMD_BUSY) && k) {
 		k--;
 		udelay(1);
 		reg = hermes_read_regn(hw, CMD);
 	}
-	if (reg & HERMES_CMD_BUSY) {
+	if (reg & HERMES_CMD_BUSY)
 		return -EBUSY;
-	}
 
 	hermes_write_regn(hw, PARAM2, param2);
 	hermes_write_regn(hw, PARAM1, param1);
 	hermes_write_regn(hw, PARAM0, param0);
 	hermes_write_regn(hw, CMD, cmd);
-	
+
 	return 0;
 }
 
@@ -191,23 +191,23 @@
 	hermes_write_regn(hw, EVACK, 0xffff);
 
 	/* Normally it's a "can't happen" for the command register to
-           be busy when we go to issue a command because we are
-           serializing all commands.  However we want to have some
-           chance of resetting the card even if it gets into a stupid
-           state, so we actually wait to see if the command register
-           will unbusy itself here. */
+	   be busy when we go to issue a command because we are
+	   serializing all commands.  However we want to have some
+	   chance of resetting the card even if it gets into a stupid
+	   state, so we actually wait to see if the command register
+	   will unbusy itself here. */
 	k = CMD_BUSY_TIMEOUT;
 	reg = hermes_read_regn(hw, CMD);
 	while (k && (reg & HERMES_CMD_BUSY)) {
-		if (reg == 0xffff) /* Special case - the card has probably been removed,
-				      so don't wait for the timeout */
+		if (reg == 0xffff) /* Special case - the card has probably been
+				      removed, so don't wait for the timeout */
 			return -ENODEV;
 
 		k--;
 		udelay(1);
 		reg = hermes_read_regn(hw, CMD);
 	}
-	
+
 	/* No need to explicitly handle the timeout - if we've timed
 	   out hermes_issue_cmd() will probably return -EBUSY below */
 
@@ -228,7 +228,10 @@
 /* Issue a command to the chip, and (busy!) wait for it to
  * complete.
  *
- * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
+ * Returns:
+ *     < 0 on internal error
+ *       0 on success
+ *     > 0 on error returned by the firmware
  *
  * Callable from any context, but locking is your problem. */
 int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
@@ -241,13 +244,13 @@
 
 	err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
 	if (err) {
-		if (! hermes_present(hw)) {
+		if (!hermes_present(hw)) {
 			if (net_ratelimit())
 				printk(KERN_WARNING "hermes @ %p: "
 				       "Card removed while issuing command "
 				       "0x%04x.\n", hw->iobase, cmd);
 			err = -ENODEV;
-		} else 
+		} else
 			if (net_ratelimit())
 				printk(KERN_ERR "hermes @ %p: "
 				       "Error %d issuing command 0x%04x.\n",
@@ -257,21 +260,21 @@
 
 	reg = hermes_read_regn(hw, EVSTAT);
 	k = CMD_COMPL_TIMEOUT;
-	while ( (! (reg & HERMES_EV_CMD)) && k) {
+	while ((!(reg & HERMES_EV_CMD)) && k) {
 		k--;
 		udelay(10);
 		reg = hermes_read_regn(hw, EVSTAT);
 	}
 
-	if (! hermes_present(hw)) {
+	if (!hermes_present(hw)) {
 		printk(KERN_WARNING "hermes @ %p: Card removed "
 		       "while waiting for command 0x%04x completion.\n",
 		       hw->iobase, cmd);
 		err = -ENODEV;
 		goto out;
 	}
-		
-	if (! (reg & HERMES_EV_CMD)) {
+
+	if (!(reg & HERMES_EV_CMD)) {
 		printk(KERN_ERR "hermes @ %p: Timeout waiting for "
 		       "command 0x%04x completion.\n", hw->iobase, cmd);
 		err = -ETIMEDOUT;
@@ -301,31 +304,30 @@
 	int err = 0;
 	int k;
 	u16 reg;
-	
-	if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
+
+	if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX))
 		return -EINVAL;
 
 	err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
-	if (err) {
+	if (err)
 		return err;
-	}
 
 	reg = hermes_read_regn(hw, EVSTAT);
 	k = ALLOC_COMPL_TIMEOUT;
-	while ( (! (reg & HERMES_EV_ALLOC)) && k) {
+	while ((!(reg & HERMES_EV_ALLOC)) && k) {
 		k--;
 		udelay(10);
 		reg = hermes_read_regn(hw, EVSTAT);
 	}
-	
-	if (! hermes_present(hw)) {
+
+	if (!hermes_present(hw)) {
 		printk(KERN_WARNING "hermes @ %p: "
 		       "Card removed waiting for frame allocation.\n",
 		       hw->iobase);
 		return -ENODEV;
 	}
-		
-	if (! (reg & HERMES_EV_ALLOC)) {
+
+	if (!(reg & HERMES_EV_ALLOC)) {
 		printk(KERN_ERR "hermes @ %p: "
 		       "Timeout waiting for frame allocation\n",
 		       hw->iobase);
@@ -334,14 +336,17 @@
 
 	*fid = hermes_read_regn(hw, ALLOCFID);
 	hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-	
+
 	return 0;
 }
 EXPORT_SYMBOL(hermes_allocate);
 
 /* Set up a BAP to read a particular chunk of data from card's internal buffer.
  *
- * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
+ * Returns:
+ *     < 0 on internal failure (errno)
+ *       0 on success
+ *     > 0 on error
  * from firmware
  *
  * Callable from any context */
@@ -353,7 +358,7 @@
 	u16 reg;
 
 	/* Paranoia.. */
-	if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
+	if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2))
 		return -EINVAL;
 
 	k = HERMES_BAP_BUSY_TIMEOUT;
@@ -374,7 +379,7 @@
 	/* Wait for the BAP to be ready */
 	k = HERMES_BAP_BUSY_TIMEOUT;
 	reg = hermes_read_reg(hw, oreg);
-	while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
+	while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
 		k--;
 		udelay(1);
 		reg = hermes_read_reg(hw, oreg);
@@ -386,9 +391,8 @@
 		       (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
 		       reg, id, offset);
 
-		if (reg & HERMES_OFFSET_BUSY) {
+		if (reg & HERMES_OFFSET_BUSY)
 			return -ETIMEDOUT;
-		}
 
 		return -EIO;		/* error or wrong offset */
 	}
@@ -400,7 +404,10 @@
  * BAP. Synchronization/serialization is the caller's problem.  len
  * must be even.
  *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ * Returns:
+ *     < 0 on internal failure (errno)
+ *       0 on success
+ *     > 0 on error from firmware
  */
 int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
 		     u16 id, u16 offset)
@@ -408,7 +415,7 @@
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
 	int err = 0;
 
-	if ( (len < 0) || (len % 2) )
+	if ((len < 0) || (len % 2))
 		return -EINVAL;
 
 	err = hermes_bap_seek(hw, bap, id, offset);
@@ -426,7 +433,10 @@
 /* Write a block of data to the chip's buffer, via the
  * BAP. Synchronization/serialization is the caller's problem.
  *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ * Returns:
+ *     < 0 on internal failure (errno)
+ *       0 on success
+ *     > 0 on error from firmware
  */
 int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
 		      u16 id, u16 offset)
@@ -440,11 +450,11 @@
 	err = hermes_bap_seek(hw, bap, id, offset);
 	if (err)
 		goto out;
-	
+
 	/* Actually do the transfer */
 	hermes_write_bytes(hw, dreg, buf, len);
 
- out:	
+ out:
 	return err;
 }
 EXPORT_SYMBOL(hermes_bap_pwrite);
@@ -465,7 +475,7 @@
 	u16 rlength, rtype;
 	unsigned nwords;
 
-	if ( (bufsize < 0) || (bufsize % 2) )
+	if ((bufsize < 0) || (bufsize % 2))
 		return -EINVAL;
 
 	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
@@ -478,7 +488,7 @@
 
 	rlength = hermes_read_reg(hw, dreg);
 
-	if (! rlength)
+	if (!rlength)
 		return -ENODATA;
 
 	rtype = hermes_read_reg(hw, dreg);
@@ -503,7 +513,7 @@
 }
 EXPORT_SYMBOL(hermes_read_ltv);
 
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, 
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
 		     u16 length, const void *value)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
index 8b13c8f..c78c442 100644
--- a/drivers/net/wireless/orinoco/hermes.h
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -15,7 +15,8 @@
  * Copyright (C) 2000, David Gibson, Linuxcare Australia.
  * (C) Copyright David Gibson, IBM Corp. 2001-2003.
  *
- * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ * Portions taken from hfa384x.h.
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
  *
  * This file distributed under the GPL, version 2.
  */
@@ -31,7 +32,7 @@
 */
 
 #include <linux/if_ether.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /*
  * Limits and constants
@@ -203,7 +204,7 @@
 	__le32 sw_support;
 	u8 retry_count;
 	u8 tx_rate;
-	__le16 tx_control;	
+	__le16 tx_control;
 } __attribute__ ((packed));
 
 #define HERMES_TXSTAT_RETRYERR		(0x0001)
@@ -298,7 +299,7 @@
 	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
 	__le16 essid_len;	/* ESSID length */
 	u8 essid[32];		/* ESSID of the network */
-    	__le16 rates[5];	/* Bit rate supported */
+	__le16 rates[5];	/* Bit rate supported */
 	__le16 basic_rates;	/* Basic rates bitmask */
 	u8 unknown2[6];		/* Always FF:FF:FF:FF:00:00 */
 	u8 unknown3[8];		/* Always 0, appeared in f/w 3.91-68 */
@@ -344,14 +345,14 @@
 	u8	data[316];
 } __attribute__ ((packed));
 
-#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)  
+#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)
 #define HERMES_LINKSTATUS_CONNECTED       (0x0001)
 #define HERMES_LINKSTATUS_DISCONNECTED    (0x0002)
 #define HERMES_LINKSTATUS_AP_CHANGE       (0x0003)
 #define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
 #define HERMES_LINKSTATUS_AP_IN_RANGE     (0x0005)
 #define HERMES_LINKSTATUS_ASSOC_FAILED    (0x0006)
-  
+
 struct hermes_linkstatus {
 	__le16 linkstatus;         /* Link status */
 } __attribute__ ((packed));
@@ -384,11 +385,12 @@
 
 /* Register access convenience macros */
 #define hermes_read_reg(hw, off) \
-	(ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+	(ioread16((hw)->iobase + ((off) << (hw)->reg_spacing)))
 #define hermes_write_reg(hw, off, val) \
 	(iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
 #define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
-#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
+#define hermes_write_regn(hw, name, val) \
+	hermes_write_reg((hw), HERMES_##name, (val))
 
 /* Function prototypes */
 void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
@@ -430,7 +432,7 @@
 
 static inline int hermes_disable_port(hermes_t *hw, int port)
 {
-	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 
+	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
 				 0, NULL);
 }
 
@@ -441,11 +443,12 @@
 	return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
 }
 
-#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
-#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
+#define HERMES_BYTES_TO_RECLEN(n) ((((n)+1)/2) + 1)
+#define HERMES_RECLEN_TO_BYTES(n) (((n)-1) * 2)
 
 /* Note that for the next two, the count is in 16-bit words, not bytes */
-static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
+static inline void hermes_read_words(struct hermes *hw, int off,
+				     void *buf, unsigned count)
 {
 	off = off << hw->reg_spacing;
 	ioread16_rep(hw->iobase + off, buf, count);
@@ -460,7 +463,8 @@
 		iowrite8(buf[count - 1], hw->iobase + off);
 }
 
-static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
+static inline void hermes_clear_words(struct hermes *hw, int off,
+				      unsigned count)
 {
 	unsigned i;
 
@@ -471,9 +475,10 @@
 }
 
 #define HERMES_READ_RECORD(hw, bap, rid, buf) \
-	(hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
+	(hermes_read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
 #define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
-	(hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
+	(hermes_write_ltv((hw), (bap), (rid), \
+			  HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
 
 static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
 {
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index d8c626e..45aed14 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -573,9 +573,9 @@
 	__le16 id;							\
 	u8 val[length];							\
 } __attribute__ ((packed)) default_pdr_data_##pid = {			\
-	__constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/		\
+	cpu_to_le16((sizeof(default_pdr_data_##pid)/		\
 				sizeof(__le16)) - 1),			\
-	__constant_cpu_to_le16(pid),					\
+	cpu_to_le16(pid),					\
 	data								\
 }
 
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index 6514e46..e082ef0 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1333,7 +1333,7 @@
 	skb->dev = dev;
 	skb->ip_summed = CHECKSUM_NONE;
 	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = __constant_htons(ETH_P_802_2);
+	skb->protocol = cpu_to_be16(ETH_P_802_2);
 	
 	stats->rx_packets++;
 	stats->rx_bytes += skb->len;
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index c653816..f3f94b2 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -1,5 +1,5 @@
 /* orinoco.h
- * 
+ *
  * Common definitions to all pieces of the various orinoco
  * drivers
  */
@@ -18,9 +18,9 @@
 #include "hermes.h"
 
 /* To enable debug messages */
-//#define ORINOCO_DEBUG		3
+/*#define ORINOCO_DEBUG		3*/
 
-#define WIRELESS_SPY		// enable iwspy support
+#define WIRELESS_SPY		/* enable iwspy support */
 
 #define MAX_SCAN_LEN		4096
 
@@ -121,7 +121,7 @@
 	u16 encode_alg, wep_restrict, tx_key;
 	struct orinoco_key keys[ORINOCO_MAX_KEYS];
 	int bitratemode;
- 	char nick[IW_ESSID_MAX_SIZE+1];
+	char nick[IW_ESSID_MAX_SIZE+1];
 	char desired_essid[IW_ESSID_MAX_SIZE+1];
 	char desired_bssid[ETH_ALEN];
 	int bssid_fixed;
@@ -131,7 +131,7 @@
 	u16 pm_on, pm_mcast, pm_period, pm_timeout;
 	u16 preamble;
 #ifdef WIRELESS_SPY
- 	struct iw_spy_data spy_data; /* iwspy support */
+	struct iw_spy_data spy_data; /* iwspy support */
 	struct iw_public_data	wireless_data;
 #endif
 
@@ -168,7 +168,10 @@
 
 #ifdef ORINOCO_DEBUG
 extern int orinoco_debug;
-#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0)
+#define DEBUG(n, args...) do { \
+	if (orinoco_debug > (n)) \
+		printk(KERN_DEBUG args); \
+} while (0)
 #else
 #define DEBUG(n, args...) do { } while (0)
 #endif	/* ORINOCO_DEBUG */
@@ -185,7 +188,7 @@
 extern int __orinoco_up(struct net_device *dev);
 extern int __orinoco_down(struct net_device *dev);
 extern int orinoco_reinit_firmware(struct net_device *dev);
-extern irqreturn_t orinoco_interrupt(int irq, void * dev_id);
+extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
 
 /********************************************************************/
 /* Locking and synchronization functions                            */
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 0b32215..d194b3e 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -6,7 +6,7 @@
  * It should also be usable on various Prism II based cards such as the
  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
  * cards such as the 3Com AirConnect and Ericsson WLAN.
- * 
+ *
  * Copyright notice & release notes in file orinoco.c
  */
 
@@ -30,7 +30,8 @@
 /********************************************************************/
 
 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco,"
+		   " Prism II based and similar wireless cards");
 MODULE_LICENSE("Dual MPL/GPL");
 
 /* Module parameters */
@@ -53,8 +54,8 @@
 
 	/* Used to handle hard reset */
 	/* yuck, we need this hack to work around the insanity of the
-         * PCMCIA layer */
-	unsigned long hard_reset_in_progress; 
+	 * PCMCIA layer */
+	unsigned long hard_reset_in_progress;
 };
 
 
@@ -98,7 +99,7 @@
  * This creates an "instance" of the driver, allocating local data
  * structures for one device.  The device is registered with Card
  * Services.
- * 
+ *
  * The dev_link structure is initialized, but we don't actually
  * configure the card at this point -- we wait until we receive a card
  * insertion event.  */
@@ -111,7 +112,7 @@
 
 	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
 			       orinoco_cs_hard_reset, NULL);
-	if (! dev)
+	if (!dev)
 		return -ENOMEM;
 	priv = netdev_priv(dev);
 	card = priv->card;
@@ -124,7 +125,7 @@
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = dev; 
+	link->irq.Instance = dev;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
@@ -162,8 +163,10 @@
  */
 
 #define CS_CHECK(fn, ret) do { \
-		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
-	} while (0)
+	last_fn = (fn); \
+	if ((last_ret = (ret)) != 0) \
+		goto cs_failed; \
+} while (0)
 
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
@@ -307,8 +310,8 @@
 	 * initialized and arranged in a linked list at link->dev_node. */
 	strcpy(card->node.dev_name, dev->name);
 	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
-                                    used to indicate that the
-                                    net_device has been registered */
+				       * used to indicate that the
+				       * net_device has been registered */
 
 	/* Finally, report what we've done */
 	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
@@ -359,7 +362,7 @@
 	/* This is probably racy, but I can't think of
 	   a better way, short of rewriting the PCMCIA
 	   layer to not suck :-( */
-	if (! test_bit(0, &card->hard_reset_in_progress)) {
+	if (!test_bit(0, &card->hard_reset_in_progress)) {
 		spin_lock_irqsave(&priv->lock, flags);
 
 		err = __orinoco_down(dev);
@@ -384,7 +387,7 @@
 	int err = 0;
 	unsigned long flags;
 
-	if (! test_bit(0, &card->hard_reset_in_progress)) {
+	if (!test_bit(0, &card->hard_reset_in_progress)) {
 		err = orinoco_reinit_firmware(dev);
 		if (err) {
 			printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
@@ -397,7 +400,7 @@
 		netif_device_attach(dev);
 		priv->hw_unavailable--;
 
-		if (priv->open && ! priv->hw_unavailable) {
+		if (priv->open && !priv->hw_unavailable) {
 			err = __orinoco_up(dev);
 			if (err)
 				printk(KERN_ERR "%s: Error %d restarting card\n",
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
index 2fc8659..b017262 100644
--- a/drivers/net/wireless/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -9,12 +9,12 @@
  *
  * Some of this code is borrowed from orinoco_plx.c
  *	Copyright (C) 2001 Daniel Barlow
- * Some of this code is borrowed from orinoco_pci.c 
+ * Some of this code is borrowed from orinoco_pci.c
  *  Copyright (C) 2001 Jean Tourrilhes
  * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
  * has been copied from it. linux-wlan-ng-0.1.10 is originally :
  *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
- * 
+ *
  * The contents of this file are subject to the Mozilla Public License
  * Version 1.1 (the "License"); you may not use this file except in
  * compliance with the License. You may obtain a copy of the License
@@ -103,9 +103,8 @@
 	iowrite16(0x8, card->bridge_io + 2);
 	for (i = 0; i < 30; i++) {
 		mdelay(30);
-		if (ioread16(card->bridge_io) & 0x10) {
+		if (ioread16(card->bridge_io) & 0x10)
 			break;
-		}
 	}
 	if (i == 30) {
 		printk(KERN_ERR PFX "brg1 timed out\n");
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index 4ebd638..78cafff 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -1,5 +1,5 @@
 /* orinoco_pci.c
- * 
+ *
  * Driver for Prism 2.5/3 devices that have a direct PCI interface
  * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
  * The card contains only one PCI region, which contains all the usual
@@ -237,7 +237,8 @@
 	" (Pavel Roskin <proski@gnu.org>,"
 	" David Gibson <hermes@gibson.dropbear.id.au> &"
 	" Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &"
+	      " David Gibson <hermes@gibson.dropbear.id.au>");
 MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
 MODULE_LICENSE("Dual MPL/GPL");
 
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h
index f4e5e06..88df3ee 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.h
+++ b/drivers/net/wireless/orinoco/orinoco_pci.h
@@ -1,5 +1,5 @@
 /* orinoco_pci.h
- * 
+ *
  * Common code for all Orinoco drivers for PCI devices, including
  * both native PCI and PCMCIA-to-PCI bridges.
  *
@@ -37,11 +37,11 @@
 	if (err)
 		printk(KERN_WARNING "%s: error %d bringing interface down "
 		       "for suspend\n", dev->name, err);
-	
+
 	netif_device_detach(dev);
 
 	priv->hw_unavailable++;
-	
+
 	orinoco_unlock(priv, &flags);
 
 	free_irq(pdev->irq, dev);
@@ -90,13 +90,13 @@
 
 	priv->hw_unavailable--;
 
-	if (priv->open && (! priv->hw_unavailable)) {
+	if (priv->open && (!priv->hw_unavailable)) {
 		err = __orinoco_up(dev);
 		if (err)
 			printk(KERN_ERR "%s: Error %d restarting card on resume\n",
 			       dev->name, err);
 	}
-	
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index ef76185..a2a4471 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -146,9 +146,8 @@
 	};
 
 	printk(KERN_DEBUG PFX "CIS: ");
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < 16; i++)
 		printk("%02X:", ioread8(card->attr_io + (i << 1)));
-	}
 	printk("\n");
 
 	/* Verify whether a supported PC card is present */
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index ede24ec..e77c404 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -1,7 +1,7 @@
 /* orinoco_tmd.c
  *
  * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160. 
+ * but are connected to the PCI bus by a TMD7160.
  *
  * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
  * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index b2ca2e3..9aefe19 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -133,7 +133,7 @@
 	udelay(1000);
 	return 0;
 
-      cs_failed:
+cs_failed:
 	cs_error(link, last_fn, last_ret);
 	return -ENODEV;
 }
@@ -171,7 +171,7 @@
  * This creates an "instance" of the driver, allocating local data
  * structures for one device.  The device is registered with Card
  * Services.
- * 
+ *
  * The dev_link structure is initialized, but we don't actually
  * configure the card at this point -- we wait until we receive a card
  * insertion event.  */
@@ -185,7 +185,7 @@
 	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
 			       spectrum_cs_hard_reset,
 			       spectrum_cs_stop_firmware);
-	if (! dev)
+	if (!dev)
 		return -ENOMEM;
 	priv = netdev_priv(dev);
 	card = priv->card;
@@ -198,7 +198,7 @@
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = dev; 
+	link->irq.Instance = dev;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
@@ -367,9 +367,8 @@
 	card->node.major = card->node.minor = 0;
 
 	/* Reset card */
-	if (spectrum_cs_hard_reset(priv) != 0) {
+	if (spectrum_cs_hard_reset(priv) != 0)
 		goto failed;
-	}
 
 	SET_NETDEV_DEV(dev, &handle_to_dev(link));
 	/* Tell the stack we exist */
@@ -382,8 +381,8 @@
 	 * initialized and arranged in a linked list at link->dev_node. */
 	strcpy(card->node.dev_name, dev->name);
 	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
-                                    used to indicate that the
-                                    net_device has been registered */
+				       * used to indicate that the
+				       * net_device has been registered */
 
 	/* Finally, report what we've done */
 	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 4a2c0b9..b0848259 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -934,21 +934,10 @@
 
 static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	u32 reg;
-
+	/*
+	 * Disable power
+	 */
 	rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
-
-	/*
-	 * Disable synchronisation.
-	 */
-	rt2x00pci_register_write(rt2x00dev, CSR14, 0);
-
-	/*
-	 * Cancel RX and TX.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-	rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
 }
 
 static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
@@ -1145,6 +1134,20 @@
 	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
 }
 
+static void rt2400pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid qid)
+{
+	u32 reg;
+
+	if (qid == QID_BEACON) {
+		rt2x00pci_register_write(rt2x00dev, CSR14, 0);
+	} else {
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+	}
+}
+
 /*
  * RX control handlers
  */
@@ -1606,6 +1609,7 @@
 	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt2400pci_write_beacon,
 	.kick_tx_queue		= rt2400pci_kick_tx_queue,
+	.kill_tx_queue		= rt2400pci_kill_tx_queue,
 	.fill_rxdone		= rt2400pci_fill_rxdone,
 	.config_filter		= rt2400pci_config_filter,
 	.config_intf		= rt2400pci_config_intf,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index b9104e2..eb82860 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1093,21 +1093,10 @@
 
 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	u32 reg;
-
+	/*
+	 * Disable power
+	 */
 	rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
-
-	/*
-	 * Disable synchronisation.
-	 */
-	rt2x00pci_register_write(rt2x00dev, CSR14, 0);
-
-	/*
-	 * Cancel RX and TX.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-	rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
 }
 
 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
@@ -1303,6 +1292,20 @@
 	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
 }
 
+static void rt2500pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid qid)
+{
+	u32 reg;
+
+	if (qid == QID_BEACON) {
+		rt2x00pci_register_write(rt2x00dev, CSR14, 0);
+	} else {
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+	}
+}
+
 /*
  * RX control handlers
  */
@@ -1905,6 +1908,7 @@
 	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt2500pci_write_beacon,
 	.kick_tx_queue		= rt2500pci_kick_tx_queue,
+	.kill_tx_queue		= rt2500pci_kill_tx_queue,
 	.fill_rxdone		= rt2500pci_fill_rxdone,
 	.config_filter		= rt2500pci_config_filter,
 	.config_intf		= rt2500pci_config_intf,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index c526e73..270691a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1935,6 +1935,7 @@
 	.write_beacon		= rt2500usb_write_beacon,
 	.get_tx_data_len	= rt2500usb_get_tx_data_len,
 	.kick_tx_queue		= rt2500usb_kick_tx_queue,
+	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt2500usb_fill_rxdone,
 	.config_shared_key	= rt2500usb_config_key,
 	.config_pairwise_key	= rt2500usb_config_key,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index d0a8256..84bd6f1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -468,9 +468,10 @@
 	 */
 	int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
 	char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
-	u16 (*get_firmware_crc) (const void *data, const size_t len);
-	int (*load_firmware) (struct rt2x00_dev *rt2x00dev, const void *data,
-			      const size_t len);
+	int (*check_firmware) (struct rt2x00_dev *rt2x00dev,
+			       const u8 *data, const size_t len);
+	int (*load_firmware) (struct rt2x00_dev *rt2x00dev,
+			      const u8 *data, const size_t len);
 
 	/*
 	 * Device initialization/deinitialization handlers.
@@ -508,6 +509,8 @@
 	int (*get_tx_data_len) (struct queue_entry *entry);
 	void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
 			       const enum data_queue_qid queue);
+	void (*kill_tx_queue) (struct rt2x00_dev *rt2x00dev,
+			       const enum data_queue_qid queue);
 
 	/*
 	 * RX control handlers
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e1b4054..05f94e2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -83,9 +83,10 @@
 		return;
 
 	/*
-	 * Stop the TX queues.
+	 * Stop the TX queues in mac80211.
 	 */
 	ieee80211_stop_queues(rt2x00dev->hw);
+	rt2x00queue_stop_queues(rt2x00dev);
 
 	/*
 	 * Disable RX.
@@ -157,7 +158,7 @@
 		return;
 
 	if (delayed_flags & DELAYED_UPDATE_BEACON)
-		rt2x00queue_update_beacon(rt2x00dev, vif);
+		rt2x00queue_update_beacon(rt2x00dev, vif, true);
 
 	if (delayed_flags & DELAYED_CONFIG_ERP)
 		rt2x00lib_config_erp(rt2x00dev, intf, &conf);
@@ -215,7 +216,7 @@
 						   rt2x00lib_beacondone_iter,
 						   rt2x00dev);
 
-	schedule_work(&rt2x00dev->intf_work);
+	queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index 2a7e8bc..d2deea2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -35,7 +35,6 @@
 	const struct firmware *fw;
 	char *fw_name;
 	int retval;
-	u16 crc;
 
 	/*
 	 * Read correct firmware from harddisk.
@@ -61,16 +60,26 @@
 		return -ENOENT;
 	}
 
-	crc = rt2x00dev->ops->lib->get_firmware_crc(fw->data, fw->size);
-	if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) {
-		ERROR(rt2x00dev, "Firmware checksum error.\n");
-		retval = -ENOENT;
-		goto exit;
-	}
-
 	INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n",
 	     fw->data[fw->size - 4], fw->data[fw->size - 3]);
 
+	retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size);
+	switch (retval) {
+	case FW_OK:
+		break;
+	case FW_BAD_CRC:
+		ERROR(rt2x00dev, "Firmware checksum error.\n");
+		goto exit;
+	case FW_BAD_LENGTH:
+		ERROR(rt2x00dev,
+		      "Invalid firmware file length (len=%zu)\n", fw->size);
+		goto exit;
+	case FW_BAD_VERSION:
+		ERROR(rt2x00dev,
+		      "Current firmware does not support detected chipset.\n");
+		goto exit;
+	};
+
 	rt2x00dev->fw = fw;
 
 	return 0;
@@ -78,7 +87,7 @@
 exit:
 	release_firmware(fw);
 
-	return retval;
+	return -ENOENT;
 }
 
 int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 9b531e0..49671fe 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -134,7 +134,7 @@
 		 rt2x00dev->ops->name, wiphy_name(rt2x00dev->hw->wiphy));
 
 	if (rt2x00dev->led_radio.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s:radio", dev_name);
+		snprintf(name, sizeof(name), "%s::radio", dev_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_radio,
@@ -144,7 +144,7 @@
 	}
 
 	if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s:assoc", dev_name);
+		snprintf(name, sizeof(name), "%s::assoc", dev_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_assoc,
@@ -154,7 +154,7 @@
 	}
 
 	if (rt2x00dev->led_qual.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s:quality", dev_name);
+		snprintf(name, sizeof(name), "%s::quality", dev_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_qual,
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 34efe46..a631613 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -123,9 +123,11 @@
  * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  * @vif: Interface for which the beacon should be updated.
+ * @enable_beacon: Enable beaconing
  */
 int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
-			      struct ieee80211_vif *vif);
+			      struct ieee80211_vif *vif,
+			      const bool enable_beacon);
 
 /**
  * rt2x00queue_index_inc - Index incrementation function
@@ -139,6 +141,15 @@
 void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
 
 /**
+ * rt2x00queue_stop_queues - Halt all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This function will loop through all available queues to stop
+ * any pending outgoing frames.
+ */
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
+
+/**
  * rt2x00queue_init_queues - Initialize all data queues
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 71de8a7..c41a0b9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -431,8 +431,10 @@
 	/*
 	 * Update the beacon.
 	 */
-	if (conf->changed & IEEE80211_IFCC_BEACON)
-		status = rt2x00queue_update_beacon(rt2x00dev, vif);
+	if (conf->changed & (IEEE80211_IFCC_BEACON |
+			     IEEE80211_IFCC_BEACON_ENABLED))
+		status = rt2x00queue_update_beacon(rt2x00dev, vif,
+						   conf->enable_beacon);
 
 	return status;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index c86fb64..a5664bd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -443,7 +443,8 @@
 }
 
 int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
-			      struct ieee80211_vif *vif)
+			      struct ieee80211_vif *vif,
+			      const bool enable_beacon)
 {
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 	struct skb_frame_desc *skbdesc;
@@ -453,6 +454,11 @@
 	if (unlikely(!intf->beacon))
 		return -ENOBUFS;
 
+	if (!enable_beacon) {
+		rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_BEACON);
+		return 0;
+	}
+
 	intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
 	if (!intf->beacon->skb)
 		return -ENOMEM;
@@ -501,6 +507,9 @@
 {
 	int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
 
+	if (queue == QID_RX)
+		return rt2x00dev->rx;
+
 	if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
 		return &rt2x00dev->tx[queue];
 
@@ -577,6 +586,14 @@
 	spin_unlock_irqrestore(&queue->lock, irqflags);
 }
 
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	txall_queue_for_each(rt2x00dev, queue)
+		rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, queue->qid);
+}
+
 void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 9ddc2d0..861322d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -135,6 +135,16 @@
 };
 
 /*
+ * Firmware validation error codes
+ */
+enum firmware_errors {
+	FW_OK,
+	FW_BAD_CRC,
+	FW_BAD_LENGTH,
+	FW_BAD_VERSION,
+};
+
+/*
  * Register handlers.
  * We store the position of a register field inside a field structure,
  * This will simplify the process of setting and reading a certain field
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index c89d152..7d50ca8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -296,6 +296,41 @@
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue);
 
+void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+			     const enum data_queue_qid qid)
+{
+	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid);
+	struct queue_entry_priv_usb *entry_priv;
+	struct queue_entry_priv_usb_bcn *bcn_priv;
+	unsigned int i;
+	bool kill_guard;
+
+	/*
+	 * When killing the beacon queue, we must also kill
+	 * the beacon guard byte.
+	 */
+	kill_guard =
+	    (qid == QID_BEACON) &&
+	    (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags));
+
+	/*
+	 * Cancel all entries.
+	 */
+	for (i = 0; i < queue->limit; i++) {
+		entry_priv = queue->entries[i].priv_data;
+		usb_kill_urb(entry_priv->urb);
+
+		/*
+		 * Kill guardian urb (if required by driver).
+		 */
+		if (kill_guard) {
+			bcn_priv = queue->entries[i].priv_data;
+			usb_kill_urb(bcn_priv->guardian_urb);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
+
 /*
  * RX data handlers.
  */
@@ -338,35 +373,14 @@
  */
 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	struct queue_entry_priv_usb *entry_priv;
-	struct queue_entry_priv_usb_bcn *bcn_priv;
-	struct data_queue *queue;
-	unsigned int i;
-
 	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
 				    REGISTER_TIMEOUT);
 
 	/*
-	 * Cancel all queues.
+	 * The USB version of kill_tx_queue also works
+	 * on the RX queue.
 	 */
-	queue_for_each(rt2x00dev, queue) {
-		for (i = 0; i < queue->limit; i++) {
-			entry_priv = queue->entries[i].priv_data;
-			usb_kill_urb(entry_priv->urb);
-		}
-	}
-
-	/*
-	 * Kill guardian urb (if required by driver).
-	 */
-	if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
-		return;
-
-	for (i = 0; i < rt2x00dev->bcn->limit; i++) {
-		bcn_priv = rt2x00dev->bcn->entries[i].priv_data;
-		if (bcn_priv->guardian_urb)
-			usb_kill_urb(bcn_priv->guardian_urb);
-	}
+	rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_RX);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index fe45238..bd2d59c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -419,6 +419,17 @@
 void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 			     const enum data_queue_qid qid);
 
+/**
+ * rt2x00usb_kill_tx_queue - Kill data queue
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @qid: Data queue to kill
+ *
+ * This will walk through all entries of the queue and kill all
+ * previously kicked frames before they can be send.
+ */
+void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+			      const enum data_queue_qid qid);
+
 /*
  * Device initialization handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index d81a8de..0be147f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1176,34 +1176,41 @@
 	return fw_name;
 }
 
-static u16 rt61pci_get_firmware_crc(const void *data, const size_t len)
+static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev,
+				  const u8 *data, const size_t len)
 {
+	u16 fw_crc;
 	u16 crc;
 
 	/*
-	 * Use the crc itu-t algorithm.
+	 * Only support 8kb firmware files.
+	 */
+	if (len != 8192)
+		return FW_BAD_LENGTH;
+
+	/*
 	 * The last 2 bytes in the firmware array are the crc checksum itself,
 	 * this means that we should never pass those 2 bytes to the crc
 	 * algorithm.
 	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc itu-t algorithm.
+	 */
 	crc = crc_itu_t(0, data, len - 2);
 	crc = crc_itu_t_byte(crc, 0);
 	crc = crc_itu_t_byte(crc, 0);
 
-	return crc;
+	return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
 }
 
-static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
-				 const size_t len)
+static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev,
+				 const u8 *data, const size_t len)
 {
 	int i;
 	u32 reg;
 
-	if (len != 8192) {
-		ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len);
-		return -ENOENT;
-	}
-
 	/*
 	 * Wait for stable hardware.
 	 */
@@ -1696,24 +1703,10 @@
 
 static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	u32 reg;
-
+	/*
+	 * Disable power
+	 */
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
-
-	/*
-	 * Disable synchronisation.
-	 */
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
-
-	/*
-	 * Cancel RX and TX.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
-	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
 }
 
 static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
@@ -1936,6 +1929,24 @@
 	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
 }
 
+static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+				  const enum data_queue_qid qid)
+{
+	u32 reg;
+
+	if (qid == QID_BEACON) {
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
+		return;
+	}
+
+	rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE));
+	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK));
+	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI));
+	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO));
+	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+}
+
 /*
  * RX control handlers
  */
@@ -2746,7 +2757,7 @@
 	.irq_handler		= rt61pci_interrupt,
 	.probe_hw		= rt61pci_probe_hw,
 	.get_firmware_name	= rt61pci_get_firmware_name,
-	.get_firmware_crc	= rt61pci_get_firmware_crc,
+	.check_firmware		= rt61pci_check_firmware,
 	.load_firmware		= rt61pci_load_firmware,
 	.initialize		= rt2x00pci_initialize,
 	.uninitialize		= rt2x00pci_uninitialize,
@@ -2761,6 +2772,7 @@
 	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt61pci_write_beacon,
 	.kick_tx_queue		= rt61pci_kick_tx_queue,
+	.kill_tx_queue		= rt61pci_kill_tx_queue,
 	.fill_rxdone		= rt61pci_fill_rxdone,
 	.config_shared_key	= rt61pci_config_shared_key,
 	.config_pairwise_key	= rt61pci_config_pairwise_key,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f854551..6521dac 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1061,35 +1061,42 @@
 	return FIRMWARE_RT2571;
 }
 
-static u16 rt73usb_get_firmware_crc(const void *data, const size_t len)
+static int rt73usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+				  const u8 *data, const size_t len)
 {
+	u16 fw_crc;
 	u16 crc;
 
 	/*
-	 * Use the crc itu-t algorithm.
+	 * Only support 2kb firmware files.
+	 */
+	if (len != 2048)
+		return FW_BAD_LENGTH;
+
+	/*
 	 * The last 2 bytes in the firmware array are the crc checksum itself,
 	 * this means that we should never pass those 2 bytes to the crc
 	 * algorithm.
 	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc itu-t algorithm.
+	 */
 	crc = crc_itu_t(0, data, len - 2);
 	crc = crc_itu_t_byte(crc, 0);
 	crc = crc_itu_t_byte(crc, 0);
 
-	return crc;
+	return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
 }
 
-static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
-				 const size_t len)
+static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev,
+				 const u8 *data, const size_t len)
 {
 	unsigned int i;
 	int status;
 	u32 reg;
 
-	if (len != 2048) {
-		ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len);
-		return -ENOENT;
-	}
-
 	/*
 	 * Wait for stable hardware.
 	 */
@@ -2278,7 +2285,7 @@
 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.probe_hw		= rt73usb_probe_hw,
 	.get_firmware_name	= rt73usb_get_firmware_name,
-	.get_firmware_crc	= rt73usb_get_firmware_crc,
+	.check_firmware		= rt73usb_check_firmware,
 	.load_firmware		= rt73usb_load_firmware,
 	.initialize		= rt2x00usb_initialize,
 	.uninitialize		= rt2x00usb_uninitialize,
@@ -2293,6 +2300,7 @@
 	.write_beacon		= rt73usb_write_beacon,
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
 	.kick_tx_queue		= rt73usb_kick_tx_queue,
+	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt73usb_fill_rxdone,
 	.config_shared_key	= rt73usb_config_shared_key,
 	.config_pairwise_key	= rt73usb_config_pairwise_key,
@@ -2360,6 +2368,7 @@
 	/* Billionton */
 	{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a611ad8..651807d 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -967,7 +967,7 @@
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_SIGNAL_DB;
+		    IEEE80211_HW_SIGNAL_UNSPEC;
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_MESH_POINT) |
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index 6f255e9..cfbb74f 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -9,6 +9,7 @@
 
 # built-in drivers
 ssb-y					+= driver_chipcommon.o
+ssb-y					+= driver_chipcommon_pmu.o
 ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
 ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
 ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 571f4fd..9681536 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -26,19 +26,6 @@
 };
 
 
-static inline u32 chipco_read32(struct ssb_chipcommon *cc,
-				u16 offset)
-{
-	return ssb_read32(cc->dev, offset);
-}
-
-static inline void chipco_write32(struct ssb_chipcommon *cc,
-				  u16 offset,
-				  u32 value)
-{
-	ssb_write32(cc->dev, offset, value);
-}
-
 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
 					u32 mask, u32 value)
 {
@@ -246,6 +233,7 @@
 {
 	if (!cc->dev)
 		return; /* We don't have a ChipCommon */
+	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	calc_fast_powerup_delay(cc);
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
new file mode 100644
index 0000000..4aaddee
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -0,0 +1,508 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/delay.h>
+
+#include "ssb_private.h"
+
+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
+{
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+	return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
+}
+
+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
+				 u32 offset, u32 value)
+{
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+}
+
+struct pmu0_plltab_entry {
+	u16 freq;	/* Crystal frequency in kHz.*/
+	u8 xf;		/* Crystal frequency value for PMU control */
+	u8 wb_int;
+	u32 wb_frac;
+};
+
+static const struct pmu0_plltab_entry pmu0_plltab[] = {
+	{ .freq = 12000, .xf =  1, .wb_int = 73, .wb_frac = 349525, },
+	{ .freq = 13000, .xf =  2, .wb_int = 67, .wb_frac = 725937, },
+	{ .freq = 14400, .xf =  3, .wb_int = 61, .wb_frac = 116508, },
+	{ .freq = 15360, .xf =  4, .wb_int = 57, .wb_frac = 305834, },
+	{ .freq = 16200, .xf =  5, .wb_int = 54, .wb_frac = 336579, },
+	{ .freq = 16800, .xf =  6, .wb_int = 52, .wb_frac = 399457, },
+	{ .freq = 19200, .xf =  7, .wb_int = 45, .wb_frac = 873813, },
+	{ .freq = 19800, .xf =  8, .wb_int = 44, .wb_frac = 466033, },
+	{ .freq = 20000, .xf =  9, .wb_int = 44, .wb_frac = 0,      },
+	{ .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
+	{ .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
+	{ .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
+	{ .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
+	{ .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0,      },
+};
+#define SSB_PMU0_DEFAULT_XTALFREQ	20000
+
+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
+{
+	const struct pmu0_plltab_entry *e;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
+		e = &pmu0_plltab[i];
+		if (e->freq == crystalfreq)
+			return e;
+	}
+
+	return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
+				u32 crystalfreq)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	const struct pmu0_plltab_entry *e = NULL;
+	u32 pmuctl, tmp, pllctl;
+	unsigned int i;
+
+	if ((bus->chip_id == 0x5354) && !crystalfreq) {
+		/* The 5354 crystal freq is 25MHz */
+		crystalfreq = 25000;
+	}
+	if (crystalfreq)
+		e = pmu0_plltab_find_entry(crystalfreq);
+	if (!e)
+		e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
+	BUG_ON(!e);
+	crystalfreq = e->freq;
+	cc->pmu.crystalfreq = e->freq;
+
+	/* Check if the PLL already is programmed to this frequency. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+		/* We're already there... */
+		return;
+	}
+
+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+		   (crystalfreq / 1000), (crystalfreq % 1000));
+
+	/* First turn the PLL off. */
+	switch (bus->chip_id) {
+	case 0x4328:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+		break;
+	case 0x5354:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	for (i = 1500; i; i--) {
+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+			break;
+		udelay(10);
+	}
+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+	/* Set PDIV in PLL control 0. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+	if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
+		pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
+	else
+		pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
+
+	/* Set WILD in PLL control 1. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
+	pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
+	pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
+	pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
+	pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
+	if (e->wb_frac == 0)
+		pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
+
+	/* Set WILD in PLL control 2. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
+	pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+	pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
+
+	/* Set the crystalfrequency and the divisor. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+struct pmu1_plltab_entry {
+	u16 freq;	/* Crystal frequency in kHz.*/
+	u8 xf;		/* Crystal frequency value for PMU control */
+	u8 ndiv_int;
+	u32 ndiv_frac;
+	u8 p1div;
+	u8 p2div;
+};
+
+static const struct pmu1_plltab_entry pmu1_plltab[] = {
+	{ .freq = 12000, .xf =  1, .p1div = 3, .p2div = 22, .ndiv_int =  0x9, .ndiv_frac = 0xFFFFEF, },
+	{ .freq = 13000, .xf =  2, .p1div = 1, .p2div =  6, .ndiv_int =  0xb, .ndiv_frac = 0x483483, },
+	{ .freq = 14400, .xf =  3, .p1div = 1, .p2div = 10, .ndiv_int =  0xa, .ndiv_frac = 0x1C71C7, },
+	{ .freq = 15360, .xf =  4, .p1div = 1, .p2div =  5, .ndiv_int =  0xb, .ndiv_frac = 0x755555, },
+	{ .freq = 16200, .xf =  5, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x6E9E06, },
+	{ .freq = 16800, .xf =  6, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x3CF3CF, },
+	{ .freq = 19200, .xf =  7, .p1div = 1, .p2div =  9, .ndiv_int =  0x5, .ndiv_frac = 0x17B425, },
+	{ .freq = 19800, .xf =  8, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0xA57EB,  },
+	{ .freq = 20000, .xf =  9, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0,        },
+	{ .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int =  0xa, .ndiv_frac = 0,        },
+	{ .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+	{ .freq = 26000, .xf = 12, .p1div = 1, .p2div =  2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
+	{ .freq = 30000, .xf = 13, .p1div = 3, .p2div =  8, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+	{ .freq = 38400, .xf = 14, .p1div = 1, .p2div =  5, .ndiv_int =  0x4, .ndiv_frac = 0x955555, },
+	{ .freq = 40000, .xf = 15, .p1div = 1, .p2div =  2, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+};
+
+#define SSB_PMU1_DEFAULT_XTALFREQ	15360
+
+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
+{
+	const struct pmu1_plltab_entry *e;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
+		e = &pmu1_plltab[i];
+		if (e->freq == crystalfreq)
+			return e;
+	}
+
+	return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
+				u32 crystalfreq)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	const struct pmu1_plltab_entry *e = NULL;
+	u32 buffer_strength = 0;
+	u32 tmp, pllctl, pmuctl;
+	unsigned int i;
+
+	if (bus->chip_id == 0x4312) {
+		/* We do not touch the BCM4312 PLL and assume
+		 * the default crystal settings work out-of-the-box. */
+		cc->pmu.crystalfreq = 20000;
+		return;
+	}
+
+	if (crystalfreq)
+		e = pmu1_plltab_find_entry(crystalfreq);
+	if (!e)
+		e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
+	BUG_ON(!e);
+	crystalfreq = e->freq;
+	cc->pmu.crystalfreq = e->freq;
+
+	/* Check if the PLL already is programmed to this frequency. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+		/* We're already there... */
+		return;
+	}
+
+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+		   (crystalfreq / 1000), (crystalfreq % 1000));
+
+	/* First turn the PLL off. */
+	switch (bus->chip_id) {
+	case 0x4325:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+				(1 << SSB_PMURES_4325_HT_AVAIL)));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+				(1 << SSB_PMURES_4325_HT_AVAIL)));
+		/* Adjust the BBPLL to 2 on all channels later. */
+		buffer_strength = 0x222222;
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	for (i = 1500; i; i--) {
+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+			break;
+		udelay(10);
+	}
+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+	/* Set p1div and p2div. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+	pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
+	pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
+	pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
+
+	/* Set ndiv int and ndiv mode */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
+	pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
+	pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
+	pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
+
+	/* Set ndiv frac */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
+	pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
+	pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
+
+	/* Change the drive strength, if required. */
+	if (buffer_strength) {
+		pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
+		pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
+		pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
+	}
+
+	/* Tune the crystalfreq and the divisor. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
+	pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+
+	if (bus->bustype == SSB_BUSTYPE_SSB) {
+		/* TODO: The user may override the crystal frequency. */
+	}
+
+	switch (bus->chip_id) {
+	case 0x4312:
+	case 0x4325:
+		ssb_pmu1_pllinit_r0(cc, crystalfreq);
+		break;
+	case 0x4328:
+	case 0x5354:
+		ssb_pmu0_pllinit_r0(cc, crystalfreq);
+		break;
+	default:
+		ssb_printk(KERN_ERR PFX
+			   "ERROR: PLL init unknown for device %04X\n",
+			   bus->chip_id);
+	}
+}
+
+struct pmu_res_updown_tab_entry {
+	u8 resource;	/* The resource number */
+	u16 updown;	/* The updown value */
+};
+
+enum pmu_res_depend_tab_task {
+	PMU_RES_DEP_SET = 1,
+	PMU_RES_DEP_ADD,
+	PMU_RES_DEP_REMOVE,
+};
+
+struct pmu_res_depend_tab_entry {
+	u8 resource;	/* The resource number */
+	u8 task;	/* SET | ADD | REMOVE */
+	u32 depend;	/* The depend mask */
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
+	{ .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_PWM,		.updown = 0x1F01, },
+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_BURST,	.updown = 0x010F, },
+	{ .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST,	.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_ILP_REQUEST,		.updown = 0x0202, },
+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM,	.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST,	.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_ROM_SWITCH,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_PA_REF_LDO,		.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_RADIO_LDO,		.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_AFE_LDO,			.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_PLL_LDO,			.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_BG_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_TX_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_RX_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_XTAL_PU,			.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_XTAL_EN,			.updown = 0xA001, },
+	{ .resource = SSB_PMURES_4328_BB_PLL_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_RF_PLL_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_BB_PLL_PU,		.updown = 0x0701, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
+	{
+		/* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
+		.resource = SSB_PMURES_4328_ILP_REQUEST,
+		.task = PMU_RES_DEP_SET,
+		.depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+			   (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
+	},
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
+	{ .resource = SSB_PMURES_4325_XTAL_PU,			.updown = 0x1501, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
+	{
+		/* Adjust HT-Available dependencies. */
+		.resource = SSB_PMURES_4325_HT_AVAIL,
+		.task = PMU_RES_DEP_ADD,
+		.depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
+	},
+};
+
+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 min_msk = 0, max_msk = 0;
+	unsigned int i;
+	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
+	unsigned int updown_tab_size;
+	const struct pmu_res_depend_tab_entry *depend_tab = NULL;
+	unsigned int depend_tab_size;
+
+	switch (bus->chip_id) {
+	case 0x4312:
+		/* We keep the default settings:
+		 * min_msk = 0xCBB
+		 * max_msk = 0x7FFFF
+		 */
+		break;
+	case 0x4325:
+		/* Power OTP down later. */
+		min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
+			  (1 << SSB_PMURES_4325_LNLDO2_PU);
+		if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
+		    SSB_CHIPCO_CHST_4325_PMUTOP_2B)
+			min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		updown_tab = pmu_res_updown_tab_4325a0;
+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
+		depend_tab = pmu_res_depend_tab_4325a0;
+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
+		break;
+	case 0x4328:
+		min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+			  (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
+			  (1 << SSB_PMURES_4328_XTAL_EN);
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		updown_tab = pmu_res_updown_tab_4328a0;
+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
+		depend_tab = pmu_res_depend_tab_4328a0;
+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
+		break;
+	case 0x5354:
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		break;
+	default:
+		ssb_printk(KERN_ERR PFX
+			   "ERROR: PMU resource config unknown for device %04X\n",
+			   bus->chip_id);
+	}
+
+	if (updown_tab) {
+		for (i = 0; i < updown_tab_size; i++) {
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+				       updown_tab[i].resource);
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
+				       updown_tab[i].updown);
+		}
+	}
+	if (depend_tab) {
+		for (i = 0; i < depend_tab_size; i++) {
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+				       depend_tab[i].resource);
+			switch (depend_tab[i].task) {
+			case PMU_RES_DEP_SET:
+				chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					       depend_tab[i].depend);
+				break;
+			case PMU_RES_DEP_ADD:
+				chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					     depend_tab[i].depend);
+				break;
+			case PMU_RES_DEP_REMOVE:
+				chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					      ~(depend_tab[i].depend));
+				break;
+			default:
+				SSB_WARN_ON(1);
+			}
+		}
+	}
+
+	/* Set the resource masks. */
+	if (min_msk)
+		chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
+	if (max_msk)
+		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+}
+
+void ssb_pmu_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 pmucap;
+
+	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+		return;
+
+	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+		    cc->pmu.rev, pmucap);
+
+	if (cc->pmu.rev >= 1) {
+		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+		} else {
+			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+				     SSB_CHIPCO_PMU_CTL_NOILPONW);
+		}
+	}
+	ssb_pmu_pll_init(cc);
+	ssb_pmu_resources_init(cc);
+}
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 76aae3d..4bc2704 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -113,6 +113,8 @@
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * 	regulatory domain.
  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -188,6 +190,8 @@
 
 	NL80211_CMD_SET_MGMT_EXTRA_IE,
 
+	NL80211_CMD_GET_REG,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
index ada71b4..79506f5 100644
--- a/include/linux/spi/libertas_spi.h
+++ b/include/linux/spi/libertas_spi.h
@@ -10,6 +10,9 @@
  */
 #ifndef _LIBERTAS_SPI_H_
 #define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
 struct libertas_spi_platform_data {
 	/* There are two ways to read data from the WLAN module's SPI
 	 * interface. Setting 0 or 1 here controls which one is used.
@@ -21,5 +24,9 @@
 
 	/* GPIO number to use as chip select */
 	u16 gpio_cs;
+
+	/* Board specific setup/teardown */
+	int (*setup)(struct spi_device *spi);
+	int (*teardown)(struct spi_device *spi);
 };
 #endif
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 7d7e03d..d3b1d18 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -181,6 +181,16 @@
 #define SSB_CHIPCO_PROG_WAITCNT		0x0124
 #define SSB_CHIPCO_FLASH_CFG		0x0128
 #define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
 #define SSB_CHIPCO_UART0_FCR		0x0308
@@ -197,6 +207,196 @@
 #define SSB_CHIPCO_UART1_LSR		0x0414
 #define SSB_CHIPCO_UART1_MSR		0x0418
 #define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM    	1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
 
 
 
@@ -353,11 +553,20 @@
 struct ssb_device;
 struct ssb_serial_port;
 
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
 struct ssb_chipcommon {
 	struct ssb_device *dev;
 	u32 capabilities;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
 };
 
 static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@@ -365,6 +574,17 @@
 	return (cc->dev != NULL);
 }
 
+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
 extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
 
 extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
@@ -406,4 +626,8 @@
 				  struct ssb_serial_port *ports);
 #endif /* CONFIG_SSB_SERIAL */
 
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+
 #endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e2144f0..409e2c6 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -860,11 +860,6 @@
  *	expect values between 0 and @max_signal.
  *	If possible please provide dB or dBm instead.
  *
- * @IEEE80211_HW_SIGNAL_DB:
- *	Hardware gives signal values in dB, decibel difference from an
- *	arbitrary, fixed reference. We expect values between 0 and @max_signal.
- *	If possible please provide dBm instead.
- *
  * @IEEE80211_HW_SIGNAL_DBM:
  *	Hardware gives signal values in dBm, decibel difference from
  *	one milliwatt. This is the preferred method since it is standardized
@@ -900,15 +895,14 @@
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
 	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
 	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
-	IEEE80211_HW_SIGNAL_DB				= 1<<6,
-	IEEE80211_HW_SIGNAL_DBM				= 1<<7,
-	IEEE80211_HW_NOISE_DBM				= 1<<8,
-	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
-	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<10,
-	IEEE80211_HW_SUPPORTS_PS			= 1<<11,
-	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<12,
-	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<13,
-	IEEE80211_HW_MFP_CAPABLE			= 1<<14,
+	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
+	IEEE80211_HW_NOISE_DBM				= 1<<7,
+	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
+	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
+	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
+	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<11,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
+	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 };
 
 /**
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 00562a8..915d043 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -591,19 +591,6 @@
 	dev_mc_sync(local->mdev, dev);
 }
 
-static void ieee80211_if_setup(struct net_device *dev)
-{
-	ether_setup(dev);
-	dev->hard_start_xmit = ieee80211_subif_start_xmit;
-	dev->wireless_handlers = &ieee80211_iw_handler_def;
-	dev->set_multicast_list = ieee80211_set_multicast_list;
-	dev->change_mtu = ieee80211_change_mtu;
-	dev->open = ieee80211_open;
-	dev->stop = ieee80211_stop;
-	dev->destructor = free_netdev;
-	/* we will validate the address ourselves in ->open */
-	dev->validate_addr = NULL;
-}
 /*
  * Called when the netdev is removed or, by the code below, before
  * the interface type changes.
@@ -671,6 +658,34 @@
 	WARN_ON(flushed);
 }
 
+static const struct net_device_ops ieee80211_dataif_ops = {
+	.ndo_open		= ieee80211_open,
+	.ndo_stop		= ieee80211_stop,
+	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_start_xmit		= ieee80211_subif_start_xmit,
+	.ndo_set_multicast_list = ieee80211_set_multicast_list,
+	.ndo_change_mtu 	= ieee80211_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+};
+
+static const struct net_device_ops ieee80211_monitorif_ops = {
+	.ndo_open		= ieee80211_open,
+	.ndo_stop		= ieee80211_stop,
+	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
+	.ndo_set_multicast_list = ieee80211_set_multicast_list,
+	.ndo_change_mtu 	= ieee80211_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+};
+
+static void ieee80211_if_setup(struct net_device *dev)
+{
+	ether_setup(dev);
+	dev->netdev_ops = &ieee80211_dataif_ops;
+	dev->wireless_handlers = &ieee80211_iw_handler_def;
+	dev->destructor = free_netdev;
+}
+
 /*
  * Helper function to initialise an interface to a specific type.
  */
@@ -682,7 +697,7 @@
 
 	/* and set some type-dependent values */
 	sdata->vif.type = type;
-	sdata->dev->hard_start_xmit = ieee80211_subif_start_xmit;
+	sdata->dev->netdev_ops = &ieee80211_dataif_ops;
 	sdata->wdev.iftype = type;
 
 	/* only monitor differs */
@@ -703,7 +718,7 @@
 		break;
 	case NL80211_IFTYPE_MONITOR:
 		sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
-		sdata->dev->hard_start_xmit = ieee80211_monitor_start_xmit;
+		sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
 		sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
 				      MONITOR_FLAG_OTHER_BSS;
 		break;
@@ -809,8 +824,6 @@
 	if (ret)
 		goto fail;
 
-	ndev->uninit = ieee80211_teardown_sdata;
-
 	if (ieee80211_vif_is_mesh(&sdata->vif) &&
 	    params && params->mesh_id_len)
 		ieee80211_sdata_set_mesh_id(sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a109c06..caf9242 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -791,6 +791,23 @@
 }
 EXPORT_SYMBOL(ieee80211_alloc_hw);
 
+static const struct net_device_ops ieee80211_master_ops = {
+	.ndo_start_xmit = ieee80211_master_start_xmit,
+	.ndo_open = ieee80211_master_open,
+	.ndo_stop = ieee80211_master_stop,
+	.ndo_set_multicast_list = ieee80211_master_set_multicast_list,
+	.ndo_select_queue = ieee80211_select_queue,
+};
+
+static void ieee80211_master_setup(struct net_device *mdev)
+{
+	mdev->type = ARPHRD_IEEE80211;
+	mdev->netdev_ops = &ieee80211_master_ops;
+	mdev->header_ops = &ieee80211_header_ops;
+	mdev->tx_queue_len = 1000;
+	mdev->addr_len = ETH_ALEN;
+}
+
 int ieee80211_register_hw(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
@@ -840,7 +857,7 @@
 		hw->ampdu_queues = 0;
 
 	mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
-			       "wmaster%d", ether_setup,
+			       "wmaster%d", ieee80211_master_setup,
 			       ieee80211_num_queues(hw));
 	if (!mdev)
 		goto fail_mdev_alloc;
@@ -851,13 +868,6 @@
 
 	ieee80211_rx_bss_list_init(local);
 
-	mdev->hard_start_xmit = ieee80211_master_start_xmit;
-	mdev->open = ieee80211_master_open;
-	mdev->stop = ieee80211_master_stop;
-	mdev->type = ARPHRD_IEEE80211;
-	mdev->header_ops = &ieee80211_header_ops;
-	mdev->set_multicast_list = ieee80211_master_set_multicast_list;
-
 	local->hw.workqueue =
 		create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
 	if (!local->hw.workqueue) {
@@ -884,7 +894,6 @@
 	local->hw.conf.listen_interval = local->hw.max_listen_interval;
 
 	local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
-						  IEEE80211_HW_SIGNAL_DB |
 						  IEEE80211_HW_SIGNAL_DBM) ?
 			       IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
 	local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
@@ -924,8 +933,6 @@
 		goto fail_wep;
 	}
 
-	local->mdev->select_queue = ieee80211_select_queue;
-
 	/* add one default STA interface if supported */
 	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
 		result = ieee80211_if_add(local, "wlan%d", NULL,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9d51e27..57967d3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1042,6 +1042,7 @@
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	int disassoc;
+	bool remove_bss = false;
 
 	/* TODO: start monitoring current AP signal quality and number of
 	 * missed beacons. Scan other channels every now and then and search
@@ -1067,6 +1068,7 @@
 				       "range\n",
 				       sdata->dev->name, ifsta->bssid);
 				disassoc = 1;
+				remove_bss = true;
 			} else
 				ieee80211_send_probe_req(sdata, ifsta->bssid,
 							 ifsta->ssid,
@@ -1086,12 +1088,24 @@
 
 	rcu_read_unlock();
 
-	if (disassoc)
+	if (disassoc) {
 		ieee80211_set_disassoc(sdata, ifsta, true, true,
 					WLAN_REASON_PREV_AUTH_NOT_VALID);
-	else
+		if (remove_bss) {
+			struct ieee80211_bss *bss;
+
+			bss = ieee80211_rx_bss_get(local, ifsta->bssid,
+					local->hw.conf.channel->center_freq,
+					ifsta->ssid, ifsta->ssid_len);
+			if (bss) {
+				atomic_dec(&bss->users);
+				ieee80211_rx_bss_put(local, bss);
+			}
+		}
+	} else {
 		mod_timer(&ifsta->timer, jiffies +
 				      IEEE80211_MONITORING_INTERVAL);
+	}
 }
 
 
@@ -1503,13 +1517,22 @@
 				   struct ieee80211_bss *bss)
 {
 	struct ieee80211_local *local = sdata->local;
-	int res, rates, i, j;
+	int res = 0, rates, i, j;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos;
 	struct ieee80211_supported_band *sband;
 	union iwreq_data wrqu;
 
+	if (local->ops->reset_tsf) {
+		/* Reset own TSF to allow time synchronization work. */
+		local->ops->reset_tsf(local_to_hw(local));
+	}
+
+	if ((ifsta->flags & IEEE80211_STA_PREV_BSSID_SET) &&
+	   memcmp(ifsta->bssid, bss->bssid, ETH_ALEN) == 0)
+		return res;
+
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
 			    sdata->u.sta.ie_proberesp_len);
 	if (!skb) {
@@ -1520,13 +1543,11 @@
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
-	/* Remove possible STA entries from other IBSS networks. */
-	sta_info_flush_delayed(sdata);
-
-	if (local->ops->reset_tsf) {
-		/* Reset own TSF to allow time synchronization work. */
-		local->ops->reset_tsf(local_to_hw(local));
+	if (!(ifsta->flags & IEEE80211_STA_PREV_BSSID_SET)) {
+		/* Remove possible STA entries from other IBSS networks. */
+		sta_info_flush_delayed(sdata);
 	}
+
 	memcpy(ifsta->bssid, bss->bssid, ETH_ALEN);
 	res = ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
 	if (res)
@@ -2415,8 +2436,10 @@
 							 ifsta->ssid_len);
 			ifsta->state = IEEE80211_STA_MLME_AUTHENTICATE;
 			set_bit(IEEE80211_STA_REQ_AUTH, &ifsta->request);
-		} else
+		} else {
+			ifsta->assoc_scan_tries = 0;
 			ifsta->state = IEEE80211_STA_MLME_DISABLED;
+		}
 	}
 	return -1;
 }
@@ -2720,9 +2743,8 @@
 
 	if (sdata && sdata->vif.type == NL80211_IFTYPE_ADHOC) {
 		ifsta = &sdata->u.sta;
-		if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
-		    (!(ifsta->state == IEEE80211_STA_MLME_IBSS_JOINED) &&
-		    !ieee80211_sta_active_ibss(sdata)))
+		if ((!(ifsta->flags & IEEE80211_STA_PREV_BSSID_SET)) ||
+		    !ieee80211_sta_active_ibss(sdata))
 			ieee80211_sta_find_ibss(sdata, ifsta);
 	}
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 19ffc8e..8e8ddbf 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -86,8 +86,7 @@
 
 	if (status->flag & RX_FLAG_TSFT)
 		len += 8;
-	if (local->hw.flags & IEEE80211_HW_SIGNAL_DB ||
-	    local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+	if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
 		len += 1;
 	if (local->hw.flags & IEEE80211_HW_NOISE_DBM)
 		len += 1;
@@ -199,14 +198,6 @@
 	*pos = status->antenna;
 	pos++;
 
-	/* IEEE80211_RADIOTAP_DB_ANTSIGNAL */
-	if (local->hw.flags & IEEE80211_HW_SIGNAL_DB) {
-		*pos = status->signal;
-		rthdr->it_present |=
-			cpu_to_le32(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL);
-		pos++;
-	}
-
 	/* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */
 
 	/* IEEE80211_RADIOTAP_RX_FLAGS */
@@ -1225,12 +1216,12 @@
 
 	switch (hdr->frame_control &
 		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
-	case __constant_cpu_to_le16(IEEE80211_FCTL_TODS):
+	case cpu_to_le16(IEEE80211_FCTL_TODS):
 		if (unlikely(sdata->vif.type != NL80211_IFTYPE_AP &&
 			     sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
 			return -1;
 		break;
-	case __constant_cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
+	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
 		if (unlikely(sdata->vif.type != NL80211_IFTYPE_WDS &&
 			     sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
 			return -1;
@@ -1244,13 +1235,13 @@
 			}
 		}
 		break;
-	case __constant_cpu_to_le16(IEEE80211_FCTL_FROMDS):
+	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
 		if (sdata->vif.type != NL80211_IFTYPE_STATION ||
 		    (is_multicast_ether_addr(dst) &&
 		     !compare_ether_addr(src, dev->dev_addr)))
 			return -1;
 		break;
-	case __constant_cpu_to_le16(0):
+	case cpu_to_le16(0):
 		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
 			return -1;
 		break;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 7b013fb..f1c726d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1433,10 +1433,31 @@
 				 struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_channel *chan = local->hw.conf.channel;
 	struct ieee80211_radiotap_header *prthdr =
 		(struct ieee80211_radiotap_header *)skb->data;
 	u16 len_rthdr;
 
+	/*
+	 * Frame injection is not allowed if beaconing is not allowed
+	 * or if we need radar detection. Beaconing is usually not allowed when
+	 * the mode or operation (Adhoc, AP, Mesh) does not support DFS.
+	 * Passive scan is also used in world regulatory domains where
+	 * your country is not known and as such it should be treated as
+	 * NO TX unless the channel is explicitly allowed in which case
+	 * your current regulatory domain would not have the passive scan
+	 * flag.
+	 *
+	 * Since AP mode uses monitor interfaces to inject/TX management
+	 * frames we can make AP mode the exception to this rule once it
+	 * supports radar detection as its implementation can deal with
+	 * radar detection by itself. We can do that later by adding a
+	 * monitor flag interfaces used for AP support.
+	 */
+	if ((chan->flags & (IEEE80211_CHAN_NO_IBSS | IEEE80211_CHAN_RADAR |
+	     IEEE80211_CHAN_PASSIVE_SCAN)))
+		goto fail;
+
 	/* check for not even having the fixed radiotap header part */
 	if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
 		goto fail; /* too short to be possibly valid */
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 5c88b82..bad1cfb 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -173,8 +173,7 @@
 	range->num_encoding_sizes = 2;
 	range->max_encoding_tokens = NUM_DEFAULT_KEYS;
 
-	if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC ||
-	    local->hw.flags & IEEE80211_HW_SIGNAL_DB)
+	if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 		range->max_qual.level = local->hw.max_signal;
 	else if  (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
 		range->max_qual.level = -110;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e69da8d..d452396 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2093,6 +2093,81 @@
 
 #undef FILL_IN_MESH_PARAM_IF_SET
 
+static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
+{
+	struct sk_buff *msg;
+	void *hdr = NULL;
+	struct nlattr *nl_reg_rules;
+	unsigned int i;
+	int err = -EINVAL;
+
+	mutex_lock(&cfg80211_drv_mutex);
+
+	if (!cfg80211_regdomain)
+		goto out;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg) {
+		err = -ENOBUFS;
+		goto out;
+	}
+
+	hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+			     NL80211_CMD_GET_REG);
+	if (!hdr)
+		goto nla_put_failure;
+
+	NLA_PUT_STRING(msg, NL80211_ATTR_REG_ALPHA2,
+		cfg80211_regdomain->alpha2);
+
+	nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES);
+	if (!nl_reg_rules)
+		goto nla_put_failure;
+
+	for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) {
+		struct nlattr *nl_reg_rule;
+		const struct ieee80211_reg_rule *reg_rule;
+		const struct ieee80211_freq_range *freq_range;
+		const struct ieee80211_power_rule *power_rule;
+
+		reg_rule = &cfg80211_regdomain->reg_rules[i];
+		freq_range = &reg_rule->freq_range;
+		power_rule = &reg_rule->power_rule;
+
+		nl_reg_rule = nla_nest_start(msg, i);
+		if (!nl_reg_rule)
+			goto nla_put_failure;
+
+		NLA_PUT_U32(msg, NL80211_ATTR_REG_RULE_FLAGS,
+			reg_rule->flags);
+		NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_START,
+			freq_range->start_freq_khz);
+		NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_END,
+			freq_range->end_freq_khz);
+		NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW,
+			freq_range->max_bandwidth_khz);
+		NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+			power_rule->max_antenna_gain);
+		NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP,
+			power_rule->max_eirp);
+
+		nla_nest_end(msg, nl_reg_rule);
+	}
+
+	nla_nest_end(msg, nl_reg_rules);
+
+	genlmsg_end(msg, hdr);
+	err = genlmsg_unicast(msg, info->snd_pid);
+	goto out;
+
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	err = -EMSGSIZE;
+out:
+	mutex_unlock(&cfg80211_drv_mutex);
+	return err;
+}
+
 static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 {
 	struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
@@ -2333,6 +2408,12 @@
 		.flags = GENL_ADMIN_PERM,
 	},
 	{
+		.cmd = NL80211_CMD_GET_REG,
+		.doit = nl80211_get_reg,
+		.policy = nl80211_policy,
+		/* can be retrieved by unprivileged users */
+	},
+	{
 		.cmd = NL80211_CMD_SET_REG,
 		.doit = nl80211_set_reg,
 		.policy = nl80211_policy,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index f643d39..2323644 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -57,7 +57,7 @@
 /* Central wireless core regulatory domains, we only need two,
  * the current one and a world regulatory domain in case we have no
  * information to give us an alpha2 */
-static const struct ieee80211_regdomain *cfg80211_regdomain;
+const struct ieee80211_regdomain *cfg80211_regdomain;
 
 /* We use this as a place for the rd structure built from the
  * last parsed country IE to rest until CRDA gets back to us with
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index eb1dd5b..fe8c83f 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -1,6 +1,8 @@
 #ifndef __NET_WIRELESS_REG_H
 #define __NET_WIRELESS_REG_H
 
+extern const struct ieee80211_regdomain *cfg80211_regdomain;
+
 bool is_world_regdom(const char *alpha2);
 bool reg_is_valid_request(const char *alpha2);