ALSA: asihpi - Remove int flag polling code preparing for stream interrupts.
Interrupt flag used for message handshake will be required for
stream interrupts, so conditionally compiled code without
HPI6205_NO_HSR_POLL defined can never be used; removing it.
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index 5fe535b..cbf79a9 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -527,10 +527,6 @@
struct hpi_hw_obj *phw = pao->priv;
struct bus_master_interface *interface;
u32 phys_addr;
-#ifndef HPI6205_NO_HSR_POLL
- u32 time_out = HPI6205_TIMEOUT;
- u32 temp1;
-#endif
int i;
u16 err;
@@ -584,27 +580,6 @@
interface = phw->p_interface_buffer;
-#ifndef HPI6205_NO_HSR_POLL
- /* wait for first interrupt indicating the DSP init is done */
- time_out = HPI6205_TIMEOUT * 10;
- temp1 = 0;
- while (((temp1 & C6205_HSR_INTSRC) == 0) && --time_out)
- temp1 = ioread32(phw->prHSR);
-
- if (temp1 & C6205_HSR_INTSRC)
- HPI_DEBUG_LOG(INFO,
- "Interrupt confirming DSP code running OK\n");
- else {
- HPI_DEBUG_LOG(ERROR,
- "Timed out waiting for interrupt "
- "confirming DSP code running\n");
- return HPI6205_ERROR_6205_NO_IRQ;
- }
-
- /* reset the interrupt */
- iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
-
/* make sure the DSP has started ok */
if (!wait_dsp_ack(phw, H620_HIF_RESET, HPI6205_TIMEOUT * 10)) {
HPI_DEBUG_LOG(ERROR, "timed out waiting reset state \n");
@@ -1982,9 +1957,6 @@
struct hpi_hw_obj *phw = pao->priv;
u32 data_transferred = 0;
u16 err = 0;
-#ifndef HPI6205_NO_HSR_POLL
- u32 time_out;
-#endif
u32 temp2;
struct bus_master_interface *interface = phw->p_interface_buffer;
@@ -2009,14 +1981,10 @@
interface->transfer_size_in_bytes = this_copy;
-#ifdef HPI6205_NO_HSR_POLL
/* DSP must change this back to nOperation */
interface->dsp_ack = H620_HIF_IDLE;
-#endif
-
send_dsp_command(phw, operation);
-#ifdef HPI6205_NO_HSR_POLL
temp2 = wait_dsp_ack(phw, operation, HPI6205_TIMEOUT);
HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n",
HPI6205_TIMEOUT - temp2, this_copy);
@@ -2029,40 +1997,6 @@
break;
}
-#else
- /* spin waiting on the result */
- time_out = HPI6205_TIMEOUT;
- temp2 = 0;
- while ((temp2 == 0) && time_out--) {
- /* give 16k bus mastering transfer time to happen */
- /*(16k / 132Mbytes/s = 122usec) */
- hpios_delay_micro_seconds(20);
- temp2 = ioread32(phw->prHSR);
- temp2 &= C6205_HSR_INTSRC;
- }
- HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n",
- HPI6205_TIMEOUT - time_out, this_copy);
- if (temp2 == C6205_HSR_INTSRC) {
- HPI_DEBUG_LOG(VERBOSE,
- "Interrupt from HIF <data> OK\n");
- /*
- if(interface->dwDspAck != nOperation) {
- HPI_DEBUG_LOG(DEBUG("interface->dwDspAck=%d,
- expected %d \n",
- interface->dwDspAck,nOperation);
- }
- */
- }
-/* need to handle this differently... */
- else {
- HPI_DEBUG_LOG(ERROR,
- "Interrupt from HIF <data> BAD\n");
- err = HPI_ERROR_DSP_HARDWARE;
- }
-
- /* reset the interrupt from the DSP */
- iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
if (operation == H620_HIF_GET_DATA)
memcpy(&p_data[data_transferred],
(void *)&interface->u.b_data[0], this_copy);
@@ -2119,9 +2053,6 @@
static u16 message_response_sequence(struct hpi_adapter_obj *pao,
struct hpi_message *phm, struct hpi_response *phr)
{
-#ifndef HPI6205_NO_HSR_POLL
- u32 temp2;
-#endif
u32 time_out, time_out2;
struct hpi_hw_obj *phw = pao->priv;
struct bus_master_interface *interface = phw->p_interface_buffer;
@@ -2164,38 +2095,6 @@
/* spin waiting on HIF interrupt flag (end of msg process) */
time_out = HPI6205_TIMEOUT;
-#ifndef HPI6205_NO_HSR_POLL
- temp2 = 0;
- while ((temp2 == 0) && --time_out) {
- temp2 = ioread32(phw->prHSR);
- temp2 &= C6205_HSR_INTSRC;
- hpios_delay_micro_seconds(1);
- }
- if (temp2 == C6205_HSR_INTSRC) {
- rmb(); /* ensure we see latest value for dsp_ack */
- if ((interface->dsp_ack != H620_HIF_GET_RESP)) {
- HPI_DEBUG_LOG(DEBUG,
- "(%u)interface->dsp_ack(0x%x) != "
- "H620_HIF_GET_RESP, t=%u\n", message_count,
- interface->dsp_ack,
- HPI6205_TIMEOUT - time_out);
- } else {
- HPI_DEBUG_LOG(VERBOSE,
- "(%u)int with GET_RESP after %u\n",
- message_count, HPI6205_TIMEOUT - time_out);
- }
-
- } else {
- /* can we do anything else in response to the error ? */
- HPI_DEBUG_LOG(ERROR,
- "Interrupt from HIF module BAD (function %x)\n",
- phm->function);
- }
-
- /* reset the interrupt from the DSP */
- iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
-
/* read the result */
if (time_out) {
if (interface->u.response_buffer.size <= phr->size)
diff --git a/sound/pci/asihpi/hpi6205.h b/sound/pci/asihpi/hpi6205.h
index e00edb0..df2f02c0 100644
--- a/sound/pci/asihpi/hpi6205.h
+++ b/sound/pci/asihpi/hpi6205.h
@@ -25,9 +25,6 @@
#ifndef _HPI6205_H_
#define _HPI6205_H_
-/* transitional conditional compile shared between host and DSP */
-/* #define HPI6205_NO_HSR_POLL */
-
#include "hpi_internal.h"
/***********************************************************