OMAP3+: voltage: convert to PRM register access functions
Convert VC/VP register access to use PRM VC/VP accessor functions. In
the process, move the read/write function pointers from vdd_info into
struct voltagedomain.
No functional changes.
Additional cleanup:
- remove prm_mod field from VC/VP data structures, the PRM register
access functions know which PRM module to use.
Signed-off-by: Kevin Hilman <khilman@ti.com>
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 1bdbe7c..f1c73cb 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -46,7 +46,7 @@
return -ENODATA;
}
- if (!vdd->read_reg || !vdd->write_reg) {
+ if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
return -EINVAL;
@@ -58,24 +58,22 @@
volt_data = NULL;
*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
+ *current_vsel = voltdm->read(vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(vc->common->prm_mod, vc->cmdval_reg);
+ vc_cmdval = voltdm->read(vc->cmdval_reg);
vc_cmdval &= ~vc->common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, vc->common->prm_mod, vc->cmdval_reg);
+ voltdm->write(vc_cmdval, vc->cmdval_reg);
/* Setting vp errorgain based on the voltage */
if (volt_data) {
- vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
- vdd->vp_data->vpconfig);
+ vp_errgain_val = voltdm->read(vdd->vp_data->vpconfig);
vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
- vdd->vp_data->vpconfig);
+ voltdm->write(vp_errgain_val, vdd->vp_data->vpconfig);
}
return 0;
@@ -120,11 +118,10 @@
(vdd->pmic_info->i2c_slave_addr <<
vc->common->slaveaddr_shift);
- vdd->write_reg(vc_bypass_value, vc->common->prm_mod, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, vc->common->prm_mod,
- vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value, vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
- vc_bypass_value = vdd->read_reg(vc->common->prm_mod, vc_bypass_val_reg);
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
/*
* Loop till the bypass command is acknowledged from the SMPS.
* NOTE: This is legacy code. The loop count and retry count needs
@@ -143,8 +140,7 @@
loop_cnt = 0;
udelay(10);
}
- vc_bypass_value = vdd->read_reg(vc->common->prm_mod,
- vc_bypass_val_reg);
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
}
omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
@@ -153,18 +149,13 @@
static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
{
- struct omap_vc_channel *vc = voltdm->vc;
- struct omap_vdd_info *vdd = voltdm->vdd;
-
/*
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
*/
- vdd->write_reg(OMAP3_CLKSETUP, vc->common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, vc->common->prm_mod,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, vc->common->prm_mod,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
+ voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
}
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
@@ -187,16 +178,16 @@
(onlp_vsel << vc->common->cmd_onlp_shift) |
(ret_vsel << vc->common->cmd_ret_shift) |
(off_vsel << vc->common->cmd_off_shift));
- vdd->write_reg(vc_val, vc->common->prm_mod, vc->cmdval_reg);
+ voltdm->write(vc_val, vc->cmdval_reg);
/*
* Generic VC parameters init
* XXX This data should be abstracted out
*/
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->common->prm_mod,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->common->prm_mod,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
+ voltdm->write(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK,
+ OMAP3_PRM_VC_CH_CONF_OFFSET);
+ voltdm->write(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK,
+ OMAP3_PRM_VC_I2C_CFG_OFFSET);
omap3_vfsm_init(voltdm);
@@ -207,8 +198,6 @@
/* OMAP4 specific voltage init functions */
static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
{
- struct omap_vc_channel *vc = voltdm->vc;
- struct omap_vdd_info *vdd = voltdm->vdd;
static bool is_initialized;
u32 vc_val;
@@ -224,11 +213,11 @@
vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
}
@@ -246,34 +235,30 @@
return;
}
- if (!vdd->read_reg || !vdd->write_reg) {
+ if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
return;
}
/* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(vc->common->prm_mod,
- vc->common->smps_sa_reg);
+ vc_val = voltdm->read(vc->common->smps_sa_reg);
vc_val &= ~vc->smps_sa_mask;
vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift;
- vdd->write_reg(vc_val, vc->common->prm_mod,
- vc->common->smps_sa_reg);
+ voltdm->write(vc_val, vc->common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(vc->common->prm_mod,
- vc->common->smps_volra_reg);
+ vc_val = voltdm->read(vc->common->smps_volra_reg);
vc_val &= ~vc->smps_volra_mask;
vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift;
- vdd->write_reg(vc_val, vc->common->prm_mod,
- vc->common->smps_volra_reg);
+ voltdm->write(vc_val, vc->common->smps_volra_reg);
/* Configure the setup times */
- vc_val = vdd->read_reg(vc->common->prm_mod, vdd->vfsm->voltsetup_reg);
+ vc_val = voltdm->read(vdd->vfsm->voltsetup_reg);
vc_val &= ~vdd->vfsm->voltsetup_mask;
vc_val |= vdd->pmic_info->volt_setup_time <<
vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, vc->common->prm_mod, vdd->vfsm->voltsetup_reg);
+ voltdm->write(vc_val, vdd->vfsm->voltsetup_reg);
if (cpu_is_omap34xx())
omap3_vc_init_channel(voltdm);