arch/arm/mm/proc-arm946.S - kernel/msm-4.9 - Gitiles

 /*
  *  linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
  *
  *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
  *
  *  (Many of cache codes are from proc-arm926.S)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"

 /*
  * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
  * comprising 256 lines of 32 bytes (8 words).
  */
 #define CACHE_DSIZE	(CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
 #define CACHE_DLINESIZE	32			/* fixed */
 #define CACHE_DSEGMENTS	4			/* fixed */
 #define CACHE_DENTRIES	(CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
 #define CACHE_DLIMIT	(CACHE_DSIZE * 4)	/* benchmark needed */

 	.text
 /*
  * cpu_arm946_proc_init()
  * cpu_arm946_switch_mm()
  *
  * These are not required.
  */
 ENTRY(cpu_arm946_proc_init)
 ENTRY(cpu_arm946_switch_mm)
 	mov	pc, lr

 /*
  * cpu_arm946_proc_fin()
  */
 ENTRY(cpu_arm946_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	mov	pc, lr

 /*
  * cpu_arm946_reset(loc)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
 	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm946_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
 	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
 	bic	ip, ip, #0x00000005		@ .............c.p
 	bic	ip, ip, #0x00001000		@ i-cache
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
 ENDPROC(cpu_arm946_reset)
 	.popsection

 /*
  * cpu_arm946_do_idle()
  */
 	.align	5
 ENTRY(cpu_arm946_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	mov	pc, lr

 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
 ENTRY(arm946_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mov	pc, lr
 ENDPROC(arm946_flush_icache_all)

 /*
  *	flush_user_cache_all()
  */
 ENTRY(arm946_flush_user_cache_all)
 	/* FALLTHROUGH */

 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
 ENTRY(arm946_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
 #else
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
 2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
 	subs	r3, r3, #1 << 4
 	bcs	2b				@ entries n to 0
 	subs	r1, r1, #1 << 29
 	bcs	1b				@ segments 3 to 0
 #endif
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c5, 0		@ flush I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	flush_user_cache_range(start, end, flags)
  *
  *	Clean and invalidate a range of cache entries in the
  *	specified address range.
  *
  *	- start	- start address (inclusive)
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags describing address space
  * (same as arm926)
  */
 ENTRY(arm946_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
 	bhs	__flush_whole_cache

 1:	tst	r2, #VM_EXEC
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
 #else
 	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
 #endif
 	cmp	r0, r1
 	blo	1b
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	coherent_kern_range(start, end)
  *
  *	Ensure coherency between the Icache and the Dcache in the
  *	region described by start, end.  If you have non-snooping
  *	Harvard caches, you need to implement this function.
  *
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
 ENTRY(arm946_coherent_kern_range)
 	/* FALLTHROUGH */

 /*
  *	coherent_user_range(start, end)
  *
  *	Ensure coherency between the Icache and the Dcache in the
  *	region described by start, end.  If you have non-snooping
  *	Harvard caches, you need to implement this function.
  *
  *	- start	- virtual start address
  *	- end	- virtual end address
  * (same as arm926)
  */
 ENTRY(arm946_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	mov	pc, lr

 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
  *	- addr	- kernel address
  *	- size	- region size
  * (same as arm926)
  */
 ENTRY(arm946_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	dma_inv_range(start, end)
  *
  *	Invalidate (discard) the specified virtual address range.
  *	May not write back any entries.  If 'start' or 'end'
  *	are not cache line aligned, those lines must be written
  *	back.
  *
  *	- start	- virtual start address
  *	- end	- virtual end address
  * (same as arm926)
  */
 arm946_dma_inv_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
 	tst	r1, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
 #endif
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	dma_clean_range(start, end)
  *
  *	Clean the specified virtual address range.
  *
  *	- start	- virtual start address
  *	- end	- virtual end address
  *
  * (same as arm926)
  */
 arm946_dma_clean_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	dma_flush_range(start, end)
  *
  *	Clean and invalidate the specified virtual address range.
  *
  *	- start	- virtual start address
  *	- end	- virtual end address
  *
  * (same as arm926)
  */
 ENTRY(arm946_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr

 /*
  *	dma_map_area(start, size, dir)
  *	- start	- kernel virtual start address
  *	- size	- size of region
  *	- dir	- DMA direction
  */
 ENTRY(arm946_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm946_dma_clean_range
 	bcs	arm946_dma_inv_range
 	b	arm946_dma_flush_range
 ENDPROC(arm946_dma_map_area)

 /*
  *	dma_unmap_area(start, size, dir)
  *	- start	- kernel virtual start address
  *	- size	- size of region
  *	- dir	- DMA direction
  */
 ENTRY(arm946_dma_unmap_area)
 	mov	pc, lr
 ENDPROC(arm946_dma_unmap_area)

 	.globl	arm946_flush_kern_cache_louis
 	.equ	arm946_flush_kern_cache_louis, arm946_flush_kern_cache_all

 	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
 	define_cache_functions arm946

 ENTRY(cpu_arm946_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr

 	__CPUINIT

 	.type	__arm946_setup, #function
 __arm946_setup:
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c6, 0		@ invalidate D cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB

 	mcr	p15, 0, r0, c6, c3, 0		@ disable memory region 3~7
 	mcr	p15, 0, r0, c6, c4, 0
 	mcr	p15, 0, r0, c6, c5, 0
 	mcr	p15, 0, r0, c6, c6, 0
 	mcr	p15, 0, r0, c6, c7, 0

 	mov	r0, #0x0000003F			@ base = 0, size = 4GB
 	mcr	p15, 0, r0, c6,	c0, 0		@ set region 0, default

 	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
 	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
 	mov	r2, #10				@ 11 is the minimum (4KB)
 1:	add	r2, r2, #1			@ area size *= 2
 	mov	r1, r1, lsr #1
 	bne	1b				@ count not zero r-shift
 	orr	r0, r0, r2, lsl #1		@ the region register value
 	orr	r0, r0, #1			@ set enable bit
 	mcr	p15, 0, r0, c6,	c1, 0		@ set region 1, RAM

 	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
 	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
 	mov	r2, #10				@ 11 is the minimum (4KB)
 1:	add	r2, r2, #1			@ area size *= 2
 	mov	r1, r1, lsr #1
 	bne	1b				@ count not zero r-shift
 	orr	r0, r0, r2, lsl #1		@ the region register value
 	orr	r0, r0, #1			@ set enable bit
 	mcr	p15, 0, r0, c6,	c2, 0		@ set region 2, ROM/FLASH

 	mov	r0, #0x06
 	mcr	p15, 0, r0, c2, c0, 0		@ region 1,2 d-cacheable
 	mcr	p15, 0, r0, c2, c0, 1		@ region 1,2 i-cacheable
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mov	r0, #0x00			@ disable whole write buffer
 #else
 	mov	r0, #0x02			@ region 1 write bufferred
 #endif
 	mcr	p15, 0, r0, c3, c0, 0

 /*
  *  Access Permission Settings for future permission control by PU.
  *
  *				priv.	user
  * 	region 0 (whole)	rw	--	: b0001
  * 	region 1 (RAM)		rw	rw	: b0011
  * 	region 2 (FLASH)	rw	r-	: b0010
  *	region 3~7 (none)	--	--	: b0000
  */
 	mov	r0, #0x00000031
 	orr	r0, r0, #0x00000200
 	mcr	p15, 0, r0, c5, c0, 2		@ set data access permission
 	mcr	p15, 0, r0, c5, c0, 3		@ set inst. access permission

 	mrc	p15, 0, r0, c1, c0		@ get control register
 	orr	r0, r0, #0x00001000		@ I-cache
 	orr	r0, r0, #0x00000005		@ MPU/D-cache
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x00004000		@ .1.. .... .... ....
 #endif
 	mov	pc, lr

 	.size	__arm946_setup, . - __arm946_setup

 	__INITDATA

 	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
 	define_processor_functions arm946, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1

 	.section ".rodata"

 	string	cpu_arch_name, "armv5te"
 	string	cpu_elf_name, "v5t"
 	string	cpu_arm946_name, "ARM946E-S"

 	.align

 	.section ".proc.info.init", #alloc, #execinstr
 	.type	__arm946_proc_info,#object
 __arm946_proc_info:
 	.long	0x41009460
 	.long	0xff00fff0
 	.long	0
 	.long	0
 	b	__arm946_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
 	.long	cpu_arm946_name
 	.long	arm946_processor_functions
 	.long	0
 	.long	0
 	.long	arm946_cache_fns
 	.size	__arm946_proc_info, . - __arm946_proc_info
	/*
	* linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
	*
	* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
	*
	* (Many of cache codes are from proc-arm926.S)
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/
	#include <linux/linkage.h>
	#include <linux/init.h>
	#include <asm/assembler.h>
	#include <asm/hwcap.h>
	#include <asm/pgtable-hwdef.h>
	#include <asm/pgtable.h>
	#include <asm/ptrace.h>
	#include "proc-macros.S"

	/*
	* ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
	* comprising 256 lines of 32 bytes (8 words).
	*/
	#define CACHE_DSIZE (CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
	#define CACHE_DLINESIZE 32 /* fixed */
	#define CACHE_DSEGMENTS 4 /* fixed */
	#define CACHE_DENTRIES (CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
	#define CACHE_DLIMIT (CACHE_DSIZE * 4) /* benchmark needed */

	.text
	/*
	* cpu_arm946_proc_init()
	* cpu_arm946_switch_mm()
	*
	* These are not required.
	*/
	ENTRY(cpu_arm946_proc_init)
	ENTRY(cpu_arm946_switch_mm)
	mov pc, lr

	/*
	* cpu_arm946_proc_fin()
	*/
	ENTRY(cpu_arm946_proc_fin)
	mrc p15, 0, r0, c1, c0, 0 @ ctrl register
	bic r0, r0, #0x00001000 @ i-cache
	bic r0, r0, #0x00000004 @ d-cache
	mcr p15, 0, r0, c1, c0, 0 @ disable caches
	mov pc, lr

	/*
	* cpu_arm946_reset(loc)
	* Params : r0 = address to jump to
	* Notes : This sets up everything for a reset
	*/
	.pushsection .idmap.text, "ax"
	ENTRY(cpu_arm946_reset)
	mov ip, #0
	mcr p15, 0, ip, c7, c5, 0 @ flush I cache
	mcr p15, 0, ip, c7, c6, 0 @ flush D cache
	mcr p15, 0, ip, c7, c10, 4 @ drain WB
	mrc p15, 0, ip, c1, c0, 0 @ ctrl register
	bic ip, ip, #0x00000005 @ .............c.p
	bic ip, ip, #0x00001000 @ i-cache
	mcr p15, 0, ip, c1, c0, 0 @ ctrl register
	mov pc, r0
	ENDPROC(cpu_arm946_reset)
	.popsection

	/*
	* cpu_arm946_do_idle()
	*/
	.align 5
	ENTRY(cpu_arm946_do_idle)
	mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
	mov pc, lr

	/*
	* flush_icache_all()
	*
	* Unconditionally clean and invalidate the entire icache.
	*/
	ENTRY(arm946_flush_icache_all)
	mov r0, #0
	mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
	mov pc, lr
	ENDPROC(arm946_flush_icache_all)

	/*
	* flush_user_cache_all()
	*/
	ENTRY(arm946_flush_user_cache_all)
	/* FALLTHROUGH */

	/*
	* flush_kern_cache_all()
	*
	* Clean and invalidate the entire cache.
	*/
	ENTRY(arm946_flush_kern_cache_all)
	mov r2, #VM_EXEC
	mov ip, #0
	__flush_whole_cache:
	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
	mcr p15, 0, ip, c7, c6, 0 @ flush D cache
	#else
	mov r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
	1: orr r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
	2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
	subs r3, r3, #1 << 4
	bcs 2b @ entries n to 0
	subs r1, r1, #1 << 29
	bcs 1b @ segments 3 to 0
	#endif
	tst r2, #VM_EXEC
	mcrne p15, 0, ip, c7, c5, 0 @ flush I cache
	mcrne p15, 0, ip, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* flush_user_cache_range(start, end, flags)
	*
	* Clean and invalidate a range of cache entries in the
	* specified address range.
	*
	* - start - start address (inclusive)
	* - end - end address (exclusive)
	* - flags - vm_flags describing address space
	* (same as arm926)
	*/
	ENTRY(arm946_flush_user_cache_range)
	mov ip, #0
	sub r3, r1, r0 @ calculate total size
	cmp r3, #CACHE_DLIMIT
	bhs __flush_whole_cache

	1: tst r2, #VM_EXEC
	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
	mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
	mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
	add r0, r0, #CACHE_DLINESIZE
	mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
	mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
	add r0, r0, #CACHE_DLINESIZE
	#else
	mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
	mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
	add r0, r0, #CACHE_DLINESIZE
	mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
	mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
	add r0, r0, #CACHE_DLINESIZE
	#endif
	cmp r0, r1
	blo 1b
	tst r2, #VM_EXEC
	mcrne p15, 0, ip, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* coherent_kern_range(start, end)
	*
	* Ensure coherency between the Icache and the Dcache in the
	* region described by start, end. If you have non-snooping
	* Harvard caches, you need to implement this function.
	*
	* - start - virtual start address
	* - end - virtual end address
	*/
	ENTRY(arm946_coherent_kern_range)
	/* FALLTHROUGH */

	/*
	* coherent_user_range(start, end)
	*
	* Ensure coherency between the Icache and the Dcache in the
	* region described by start, end. If you have non-snooping
	* Harvard caches, you need to implement this function.
	*
	* - start - virtual start address
	* - end - virtual end address
	* (same as arm926)
	*/
	ENTRY(arm946_coherent_user_range)
	bic r0, r0, #CACHE_DLINESIZE - 1
	1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
	add r0, r0, #CACHE_DLINESIZE
	cmp r0, r1
	blo 1b
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov r0, #0
	mov pc, lr

	/*
	* flush_kern_dcache_area(void *addr, size_t size)
	*
	* Ensure no D cache aliasing occurs, either with itself or
	* the I cache
	*
	* - addr - kernel address
	* - size - region size
	* (same as arm926)
	*/
	ENTRY(arm946_flush_kern_dcache_area)
	add r1, r0, r1
	1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
	add r0, r0, #CACHE_DLINESIZE
	cmp r0, r1
	blo 1b
	mov r0, #0
	mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* dma_inv_range(start, end)
	*
	* Invalidate (discard) the specified virtual address range.
	* May not write back any entries. If 'start' or 'end'
	* are not cache line aligned, those lines must be written
	* back.
	*
	* - start - virtual start address
	* - end - virtual end address
	* (same as arm926)
	*/
	arm946_dma_inv_range:
	#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
	tst r0, #CACHE_DLINESIZE - 1
	mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
	tst r1, #CACHE_DLINESIZE - 1
	mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
	#endif
	bic r0, r0, #CACHE_DLINESIZE - 1
	1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
	add r0, r0, #CACHE_DLINESIZE
	cmp r0, r1
	blo 1b
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* dma_clean_range(start, end)
	*
	* Clean the specified virtual address range.
	*
	* - start - virtual start address
	* - end - virtual end address
	*
	* (same as arm926)
	*/
	arm946_dma_clean_range:
	#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
	bic r0, r0, #CACHE_DLINESIZE - 1
	1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	add r0, r0, #CACHE_DLINESIZE
	cmp r0, r1
	blo 1b
	#endif
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* dma_flush_range(start, end)
	*
	* Clean and invalidate the specified virtual address range.
	*
	* - start - virtual start address
	* - end - virtual end address
	*
	* (same as arm926)
	*/
	ENTRY(arm946_dma_flush_range)
	bic r0, r0, #CACHE_DLINESIZE - 1
	1:
	#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
	mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
	#else
	mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
	#endif
	add r0, r0, #CACHE_DLINESIZE
	cmp r0, r1
	blo 1b
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov pc, lr

	/*
	* dma_map_area(start, size, dir)
	* - start - kernel virtual start address
	* - size - size of region
	* - dir - DMA direction
	*/
	ENTRY(arm946_dma_map_area)
	add r1, r1, r0
	cmp r2, #DMA_TO_DEVICE
	beq arm946_dma_clean_range
	bcs arm946_dma_inv_range
	b arm946_dma_flush_range
	ENDPROC(arm946_dma_map_area)

	/*
	* dma_unmap_area(start, size, dir)
	* - start - kernel virtual start address
	* - size - size of region
	* - dir - DMA direction
	*/
	ENTRY(arm946_dma_unmap_area)
	mov pc, lr
	ENDPROC(arm946_dma_unmap_area)

	.globl arm946_flush_kern_cache_louis
	.equ arm946_flush_kern_cache_louis, arm946_flush_kern_cache_all

	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
	define_cache_functions arm946

	ENTRY(cpu_arm946_dcache_clean_area)
	#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
	1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	add r0, r0, #CACHE_DLINESIZE
	subs r1, r1, #CACHE_DLINESIZE
	bhi 1b
	#endif
	mcr p15, 0, r0, c7, c10, 4 @ drain WB
	mov pc, lr

	__CPUINIT

	.type __arm946_setup, #function
	__arm946_setup:
	mov r0, #0
	mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
	mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
	mcr p15, 0, r0, c7, c10, 4 @ drain WB

	mcr p15, 0, r0, c6, c3, 0 @ disable memory region 3~7
	mcr p15, 0, r0, c6, c4, 0
	mcr p15, 0, r0, c6, c5, 0
	mcr p15, 0, r0, c6, c6, 0
	mcr p15, 0, r0, c6, c7, 0

	mov r0, #0x0000003F @ base = 0, size = 4GB
	mcr p15, 0, r0, c6, c0, 0 @ set region 0, default

	ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
	ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
	mov r2, #10 @ 11 is the minimum (4KB)
	1: add r2, r2, #1 @ area size *= 2
	mov r1, r1, lsr #1
	bne 1b @ count not zero r-shift
	orr r0, r0, r2, lsl #1 @ the region register value
	orr r0, r0, #1 @ set enable bit
	mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM

	ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
	ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
	mov r2, #10 @ 11 is the minimum (4KB)
	1: add r2, r2, #1 @ area size *= 2
	mov r1, r1, lsr #1
	bne 1b @ count not zero r-shift
	orr r0, r0, r2, lsl #1 @ the region register value
	orr r0, r0, #1 @ set enable bit
	mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH

	mov r0, #0x06
	mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable
	mcr p15, 0, r0, c2, c0, 1 @ region 1,2 i-cacheable
	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
	mov r0, #0x00 @ disable whole write buffer
	#else
	mov r0, #0x02 @ region 1 write bufferred
	#endif
	mcr p15, 0, r0, c3, c0, 0

	/*
	* Access Permission Settings for future permission control by PU.
	*
	* priv. user
	* region 0 (whole) rw -- : b0001
	* region 1 (RAM) rw rw : b0011
	* region 2 (FLASH) rw r- : b0010
	* region 3~7 (none) -- -- : b0000
	*/
	mov r0, #0x00000031
	orr r0, r0, #0x00000200
	mcr p15, 0, r0, c5, c0, 2 @ set data access permission
	mcr p15, 0, r0, c5, c0, 3 @ set inst. access permission

	mrc p15, 0, r0, c1, c0 @ get control register
	orr r0, r0, #0x00001000 @ I-cache
	orr r0, r0, #0x00000005 @ MPU/D-cache
	#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
	orr r0, r0, #0x00004000 @ .1.. .... .... ....
	#endif
	mov pc, lr

	.size __arm946_setup, . - __arm946_setup

	__INITDATA

	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
	define_processor_functions arm946, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1

	.section ".rodata"

	string cpu_arch_name, "armv5te"
	string cpu_elf_name, "v5t"
	string cpu_arm946_name, "ARM946E-S"

	.align

	.section ".proc.info.init", #alloc, #execinstr
	.type __arm946_proc_info,#object
	__arm946_proc_info:
	.long 0x41009460
	.long 0xff00fff0
	.long 0
	.long 0
	b __arm946_setup
	.long cpu_arch_name
	.long cpu_elf_name
	.long HWCAP_SWP \| HWCAP_HALF \| HWCAP_THUMB
	.long cpu_arm946_name
	.long arm946_processor_functions
	.long 0
	.long 0
	.long arm946_cache_fns
	.size __arm946_proc_info, . - __arm946_proc_info