USB: EHCI: add symbolic constants for QHs
This patch (as1568) introduces symbolic constants for some of the
less-frequently used bitfields in the QH structure. This makes the
code a little easier to read and understand.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 7d117bb..1565047 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -100,7 +100,7 @@
* and set the pseudo-toggle in udev. Only usb_clear_halt() will
* ever clear it.
*/
- if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+ if (!(hw->hw_info1 & cpu_to_hc32(ehci, QH_TOGGLE_CTL))) {
unsigned is_out, epnum;
is_out = qh->is_out;
@@ -886,7 +886,7 @@
/* using TT? */
switch (urb->dev->speed) {
case USB_SPEED_LOW:
- info1 |= (1 << 12); /* EPS "low" */
+ info1 |= QH_LOW_SPEED;
/* FALL THROUGH */
case USB_SPEED_FULL:
@@ -894,8 +894,8 @@
if (type != PIPE_INTERRUPT)
info1 |= (EHCI_TUNE_RL_TT << 28);
if (type == PIPE_CONTROL) {
- info1 |= (1 << 27); /* for TT */
- info1 |= 1 << 14; /* toggle from qtd */
+ info1 |= QH_CONTROL_EP; /* for TT */
+ info1 |= QH_TOGGLE_CTL; /* toggle from qtd */
}
info1 |= maxp << 16;
@@ -920,11 +920,11 @@
break;
case USB_SPEED_HIGH: /* no TT involved */
- info1 |= (2 << 12); /* EPS "high" */
+ info1 |= QH_HIGH_SPEED;
if (type == PIPE_CONTROL) {
info1 |= (EHCI_TUNE_RL_HS << 28);
info1 |= 64 << 16; /* usb2 fixed maxpacket */
- info1 |= 1 << 14; /* toggle from qtd */
+ info1 |= QH_TOGGLE_CTL; /* toggle from qtd */
info2 |= (EHCI_TUNE_MULT_HS << 30);
} else if (type == PIPE_BULK) {
info1 |= (EHCI_TUNE_RL_HS << 28);