[SCSI] zfcp: Update FSF error reporting
The SCSI midlayer retries commands based on the remote port state and
the command status reported by the driver. Returning
DID_TRANSPORT_DISRUPTED is a better approach, use this for reporting
FSF errors back to the SCSI midlayer. See
http://marc.info/?l=linux-scsi&m=125668044215051&w=2 as reference.
There is also no need in special treatment of ABORTED commands, so
remove the ZFCP_STATUS_FSFREQ_ABORTED, the commands are then returned
with DID_TRANSPORT_DISRUPTED.
Also remove the ZFCP_STATUS_FSFREQ_RETRY: It is useless, no retry is
happening in the FSF layer and nobody checks the state of this flag.
Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index fb580b1..3089a05 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -315,7 +315,6 @@
case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
return;
case FSF_SQ_COMMAND_ABORTED:
- req->status |= ZFCP_STATUS_FSFREQ_ABORTED;
break;
case FSF_SQ_NO_RECOM:
dev_err(&req->adapter->ccw_device->dev,
@@ -356,8 +355,7 @@
zfcp_dbf_hba_fsf_response(req);
if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY; /* only for SCSI cmnds. */
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
return;
}
@@ -375,7 +373,7 @@
case FSF_PROT_ERROR_STATE:
case FSF_PROT_SEQ_NUMB_ERROR:
zfcp_erp_adapter_reopen(adapter, 0, "fspse_2", req);
- req->status |= ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_PROT_UNSUPP_QTCB_TYPE:
dev_err(&adapter->ccw_device->dev,
@@ -884,13 +882,11 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fsafch3", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_BOXED:
zfcp_erp_unit_boxed(unit, "fsafch4", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (fsq->word[0]) {
@@ -988,8 +984,7 @@
case FSF_ACCESS_DENIED:
break;
case FSF_PORT_BOXED:
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_PORT_HANDLE_NOT_VALID:
zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
@@ -1761,9 +1756,7 @@
&unit->status);
read_unlock(&port->unit_list_lock);
zfcp_erp_port_boxed(port, "fscpph2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
-
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
@@ -1867,8 +1860,7 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fsouh_2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_SHARING_VIOLATION:
if (header->fsf_status_qual.word[0])
@@ -2030,8 +2022,7 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fscuh_3", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (req->qtcb->header.fsf_status_qual.word[0]) {
@@ -2164,13 +2155,8 @@
return;
}
- if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
- set_host_byte(scpnt, DID_SOFT_ERROR);
- goto skip_fsfstatus;
- }
-
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
- set_host_byte(scpnt, DID_ERROR);
+ set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
goto skip_fsfstatus;
}
@@ -2266,13 +2252,11 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fssfch5", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_BOXED:
zfcp_erp_unit_boxed(unit, "fssfch6", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
if (header->fsf_status_qual.word[0] ==