Drivers: media: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c
index 38952fa..c4c5917 100644
--- a/drivers/media/pci/bt8xx/bttv-cards.c
+++ b/drivers/media/pci/bt8xx/bttv-cards.c
@@ -87,7 +87,7 @@
static int tea5757_write(struct bttv *btv, int value);
static void identify_by_eeprom(struct bttv *btv,
unsigned char eeprom_data[256]);
-static int __devinit pvr_boot(struct bttv *btv);
+static int pvr_boot(struct bttv *btv);
/* config variables */
static unsigned int triton1;
@@ -151,7 +151,7 @@
unsigned id;
int cardnr;
char *name;
-} cards[] __devinitdata = {
+} cards[] = {
{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
{ 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
@@ -2837,7 +2837,7 @@
/*
* identify card
*/
-void __devinit bttv_idcard(struct bttv *btv)
+void bttv_idcard(struct bttv *btv)
{
unsigned int gpiobits;
int i,type;
@@ -3235,7 +3235,7 @@
}
/* initialization part one -- before registering i2c bus */
-void __devinit bttv_init_card1(struct bttv *btv)
+void bttv_init_card1(struct bttv *btv)
{
switch (btv->c.type) {
case BTTV_BOARD_HAUPPAUGE:
@@ -3267,7 +3267,7 @@
}
/* initialization part two -- after registering i2c bus */
-void __devinit bttv_init_card2(struct bttv *btv)
+void bttv_init_card2(struct bttv *btv)
{
btv->tuner_type = UNSET;
@@ -3571,7 +3571,7 @@
/* initialize the tuner */
-void __devinit bttv_init_tuner(struct bttv *btv)
+void bttv_init_tuner(struct bttv *btv)
{
int addr = ADDR_UNSET;
@@ -3635,7 +3635,7 @@
}
}
-static void __devinit hauppauge_eeprom(struct bttv *btv)
+static void hauppauge_eeprom(struct bttv *btv)
{
struct tveeprom tv;
@@ -3709,8 +3709,7 @@
#define BTTV_ALT_DCLK 0x100000
#define BTTV_ALT_NCONFIG 0x800000
-static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
- u32 microlen)
+static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
{
u32 n;
u8 bits;
@@ -3747,7 +3746,7 @@
return 0;
}
-static int __devinit pvr_boot(struct bttv *btv)
+static int pvr_boot(struct bttv *btv)
{
const struct firmware *fw_entry;
int rc;
@@ -3767,7 +3766,7 @@
/* ----------------------------------------------------------------------- */
/* some osprey specific stuff */
-static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
+static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
{
int i;
u32 serial = 0;
@@ -3898,7 +3897,7 @@
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
-static void __devinit avermedia_eeprom(struct bttv *btv)
+static void avermedia_eeprom(struct bttv *btv)
{
int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
@@ -3960,7 +3959,7 @@
* Hauppauge: pin 5
* Voodoo: pin 20
*/
-static void __devinit boot_msp34xx(struct bttv *btv, int pin)
+static void boot_msp34xx(struct bttv *btv, int pin)
{
int mask = (1 << pin);
@@ -3983,11 +3982,10 @@
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */
-static void __devinit init_PXC200(struct bttv *btv)
+static void init_PXC200(struct bttv *btv)
{
- static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
- 0x00 };
+ static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
+ 0x03, 0x04, 0x05, 0x06, 0x00 };
unsigned int i;
int tmp;
u32 val;
@@ -4851,7 +4849,7 @@
}
}
-int __devinit bttv_handle_chipset(struct bttv *btv)
+int bttv_handle_chipset(struct bttv *btv)
{
unsigned char command;