Drivers: media: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c
index f148b19..2290fae 100644
--- a/drivers/media/pci/pluto2/pluto2.c
+++ b/drivers/media/pci/pluto2/pluto2.c
@@ -240,7 +240,7 @@
pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
}
-static int __devinit pluto_dma_map(struct pluto *pluto)
+static int pluto_dma_map(struct pluto *pluto)
{
pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
@@ -368,7 +368,7 @@
return IRQ_HANDLED;
}
-static void __devinit pluto_enable_irqs(struct pluto *pluto)
+static void pluto_enable_irqs(struct pluto *pluto)
{
u32 val = pluto_readreg(pluto, REG_TSCR);
@@ -394,7 +394,7 @@
pluto_write_tscr(pluto, val);
}
-static int __devinit pluto_hw_init(struct pluto *pluto)
+static int pluto_hw_init(struct pluto *pluto)
{
pluto_reset_frontend(pluto, 1);
@@ -505,7 +505,7 @@
return request_firmware(fw, name, &pluto->pdev->dev);
}
-static struct tda1004x_config pluto2_fe_config __devinitdata = {
+static struct tda1004x_config pluto2_fe_config = {
.demod_address = I2C_ADDR_TDA10046 >> 1,
.invert = 1,
.invert_oclk = 0,
@@ -515,7 +515,7 @@
.request_firmware = pluto2_request_firmware,
};
-static int __devinit frontend_init(struct pluto *pluto)
+static int frontend_init(struct pluto *pluto)
{
int ret;
@@ -536,14 +536,14 @@
return 0;
}
-static void __devinit pluto_read_rev(struct pluto *pluto)
+static void pluto_read_rev(struct pluto *pluto)
{
u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
(val >> 12) & 0x0f, (val >> 4) & 0xff);
}
-static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
+static void pluto_read_mac(struct pluto *pluto, u8 *mac)
{
u32 val = pluto_readreg(pluto, REG_MMAC);
mac[0] = (val >> 8) & 0xff;
@@ -560,7 +560,7 @@
dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
}
-static int __devinit pluto_read_serial(struct pluto *pluto)
+static int pluto_read_serial(struct pluto *pluto)
{
struct pci_dev *pdev = pluto->pdev;
unsigned int i, j;
@@ -588,8 +588,7 @@
return 0;
}
-static int __devinit pluto2_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct pluto *pluto;
struct dvb_adapter *dvb_adapter;
@@ -742,7 +741,7 @@
goto out;
}
-static void __devexit pluto2_remove(struct pci_dev *pdev)
+static void pluto2_remove(struct pci_dev *pdev)
{
struct pluto *pluto = pci_get_drvdata(pdev);
struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
@@ -777,7 +776,7 @@
#define PCI_DEVICE_ID_PLUTO2 0x0001
#endif
-static struct pci_device_id pluto2_id_table[] __devinitdata = {
+static struct pci_device_id pluto2_id_table[] = {
{
.vendor = PCI_VENDOR_ID_SCM,
.device = PCI_DEVICE_ID_PLUTO2,
@@ -794,7 +793,7 @@
.name = DRIVER_NAME,
.id_table = pluto2_id_table,
.probe = pluto2_probe,
- .remove = __devexit_p(pluto2_remove),
+ .remove = pluto2_remove,
};
static int __init pluto2_init(void)