extcon: max77693: Use HOST term to express USB-HOST cable instead of OTG term
This patch unifies the term called 'USB_OTG' and 'USB_HOST'
into USB_HOST. OTG(On-The-Go) function supports USB host and
this driver sents 'USB-Host event. So, unifies term to USB_HOST.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
[cw00.choi: Fix patch title to indicate the correct meaning of patch]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 9aca3b7..dfcc5cb 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -190,8 +190,8 @@
/* The below accessories have same ADC value so ADCLow and
ADC1K bit is used to separate specific accessory */
/* ADC|VBVolot|ADCLow|ADC1K| */
- MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */
- MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */
MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */
MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */
MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */
@@ -403,8 +403,8 @@
/**
* [0x1|VBVolt|ADCLow|ADC1K]
- * [0x1| 0| 0| 0] USB_OTG
- * [0x1| 1| 0| 0] USB_OTG_VB
+ * [0x1| 0| 0| 0] USB_HOST
+ * [0x1| 1| 0| 0] USB_HSOT_VB
* [0x1| 0| 1| 0] Audio Video cable with load
* [0x1| 0| 1| 1] MHL without charging cable
* [0x1| 1| 1| 1] MHL with charging cable
@@ -523,7 +523,7 @@
* - Support charging and data connection through micro-usb port
* if USB cable is connected between target and host
* device.
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb, attached);
if (ret < 0)
@@ -609,9 +609,9 @@
MAX77693_CABLE_GROUP_ADC_GND, &attached);
switch (cable_type_gnd) {
- case MAX77693_MUIC_GND_USB_OTG:
- case MAX77693_MUIC_GND_USB_OTG_VB:
- /* USB_OTG, PATH: AP_USB */
+ case MAX77693_MUIC_GND_USB_HOST:
+ case MAX77693_MUIC_GND_USB_HOST_VB:
+ /* USB_HOST, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
@@ -704,7 +704,7 @@
switch (cable_type) {
case MAX77693_MUIC_ADC_GROUND:
- /* USB_OTG/MHL/Audio */
+ /* USB_HOST/MHL/Audio */
max77693_muic_adc_ground_handler(info);
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
@@ -886,7 +886,7 @@
* - Support charging and data connection through micro-
* usb port if USB cable is connected between target
* and host device
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb,
attached);