OMAP2+: powerdomain: fix bank power state bitfields
The bank power state bitfields in the powerdomain data are
encoded incorrectly. These fields are intended to be bitfields,
representing a set of power states that the memory banks support.
However, when only one power state was supported by a given bank,
the field was incorrectly set to the bit shift -- not the mask.
While here, update some file copyrights.
The OMAP4 autogeneration scripts have been updated accordingly.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: BenoƮt Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index e1bec56..9c9c113 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -2,7 +2,7 @@
* OMAP3 powerdomain definitions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
+ * Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
*
@@ -47,10 +47,10 @@
[3] = PWRSTS_OFF_RET,
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON,
- [1] = PWRDM_POWER_ON,
+ [0] = PWRSTS_ON,
+ [1] = PWRSTS_ON,
[2] = PWRSTS_OFF_ON,
- [3] = PWRDM_POWER_ON,
+ [3] = PWRSTS_ON,
},
};
@@ -128,13 +128,13 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
- [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ [0] = PWRSTS_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ [0] = PWRSTS_ON, /* MEMONSTATE */
},
};
@@ -149,13 +149,13 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
- [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ [0] = PWRSTS_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ [0] = PWRSTS_ON, /* MEMONSTATE */
},
};
@@ -164,13 +164,13 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
- [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ [0] = PWRSTS_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ [0] = PWRSTS_ON, /* MEMONSTATE */
},
};
@@ -182,10 +182,10 @@
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
.pwrsts_mem_ret = {
- [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ [0] = PWRSTS_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ [0] = PWRSTS_ON, /* MEMONSTATE */
},
};
@@ -200,7 +200,7 @@
.prcm_offs = OMAP3430_NEON_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
};
static struct powerdomain usbhost_pwrdm = {
@@ -208,7 +208,7 @@
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
/*
* REVISIT: Enabling usb host save and restore mechanism seems to
* leave the usb host domain permanently in ACTIVE mode after
@@ -218,10 +218,10 @@
/*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
- [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ [0] = PWRSTS_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
- [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ [0] = PWRSTS_ON, /* MEMONSTATE */
},
};