BCM1480 headers
Add header files for BCM1480/1280/1455/1255 family of chips, and
update sb1250 headers which are shared by BCM1480 family.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h
new file mode 100644
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index 9db80cd..3aab137 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -61,6 +61,8 @@
* XXX: can't remove MC base 0 if 112x, since it's used by other macros,
* since there is one reg there (but it could get its addr/offset constant).
*/
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define A_MC_BASE_0 0x0010051000
#define A_MC_BASE_1 0x0010052000
#define MC_REGISTER_SPACING 0x1000
@@ -101,10 +103,14 @@
#define R_MC_TEST_ECC 0x0000000420
#define R_MC_MCLK_CFG 0x0000000500
+#endif /* 1250 & 112x */
+
/* *********************************************************************
* L2 Cache Control Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */
+
#define A_L2_READ_TAG 0x0010040018
#define A_L2_ECC_TAG 0x0010040038
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
@@ -125,13 +131,16 @@
#define A_L2_READ_ADDRESS A_L2_READ_TAG
#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
+#endif
/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */
#define A_PCI_TYPE00_HEADER 0x00DE000000
#define A_PCI_TYPE01_HEADER 0x00DE000800
+#endif
/* *********************************************************************
@@ -264,15 +273,15 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_NUM_PORTS 2
#define A_DUART 0x0010060000
-#define A_DUART_REG(r)
-
#define DUART_CHANREG_SPACING 0x100
#define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
#define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg))
+#endif /* 1250 & 112x */
#define R_DUART_MODE_REG_1 0x100
#define R_DUART_MODE_REG_2 0x110
@@ -307,11 +316,13 @@
#define DUART_IMRISR_SPACING 0x20
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
#define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
#define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan))
#define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan))
+#endif /* 1250 & 112x */
@@ -368,6 +379,8 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */
+
#define A_SER_BASE_0 0x0010060400
#define A_SER_BASE_1 0x0010060800
#define SER_SPACING 0x400
@@ -457,6 +470,8 @@
#define R_SER_RMON_RX_ERRORS 0x000001F0
#define R_SER_RMON_RX_BADADDR 0x000001F8
+#endif /* 1250/112x */
+
/* *********************************************************************
* Generic Bus Registers
********************************************************************* */
@@ -634,12 +649,13 @@
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_SCRATCH 0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000
#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00
#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08
-#endif /* 1250 PASS2 || 112x PASS1 */
-
+#endif
/* *********************************************************************
* System Control Registers
@@ -667,15 +683,16 @@
#define A_ADDR_TRAP_CFG_1 0x0010020448
#define A_ADDR_TRAP_CFG_2 0x0010020450
#define A_ADDR_TRAP_CFG_3 0x0010020458
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_IMR_CPU0_BASE 0x0010020000
#define A_IMR_CPU1_BASE 0x0010022000
#define IMR_REGISTER_SPACING 0x2000
@@ -700,6 +717,7 @@
#define R_IMR_INTERRUPT_STATUS_COUNT 7
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
+#endif /* 1250/112x */
/* *********************************************************************
* System Performance Counter Registers
@@ -718,6 +736,7 @@
#define A_SCD_BUS_ERR_STATUS 0x0010020880
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0
#endif /* 1250 PASS2 || 112x PASS1 */
#define A_BUS_ERR_DATA_0 0x00100208A0
#define A_BUS_ERR_DATA_1 0x00100208A8
@@ -798,6 +817,7 @@
* Physical Address Map
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
@@ -831,6 +851,7 @@
#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+#endif
#endif