ARM: at91: add atmel-mci support for chips and boards which can use it
Since atmel-mci driver supports all atmel mci versions,
use it instead of the deprecated at91_mci driver.
Platform data and all related configuration are removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: remove at91_mci platform data]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9c0b148..7359472 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -161,9 +161,9 @@
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -179,7 +179,7 @@
};
static struct platform_device at91sam9rl_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -190,40 +190,40 @@
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
+ if (data->slot[0].bus_width) {
+ /* input/irq */
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
+ at91_set_gpio_input(data->slot[0].detect_pin, 1);
+ at91_set_deglitch(data->slot[0].detect_pin, 1);
+ }
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->slot[0].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9rl_mmc_device);
}
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9rl_mmc_device);
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif