mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolib
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Cc: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 223e7c9..ccca08e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -202,4 +202,16 @@
SPI driver for Freescale MC33880 high-side/low-side switch.
This provides GPIO interface supporting inputs and outputs.
+comment "AC97 GPIO expanders:"
+
+config GPIO_UCB1400
+ bool "Philips UCB1400 GPIO"
+ depends on UCB1400_CORE
+ help
+ This enables support for the Philips UCB1400 GPIO pins.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_gpio.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f35de16..c1ac034 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
+obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/ucb1400_gpio.c
new file mode 100644
index 0000000..50e6bd1
--- /dev/null
+++ b/drivers/gpio/ucb1400_gpio.c
@@ -0,0 +1,125 @@
+/*
+ * Philips UCB1400 GPIO driver
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+struct ucb1400_gpio_data *ucbdata;
+
+static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_direction(gpio->ac97, off, 0);
+ return 0;
+}
+
+static int ucb1400_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_direction(gpio->ac97, off, 1);
+ ucb1400_gpio_set_value(gpio->ac97, off, val);
+ return 0;
+}
+
+static int ucb1400_gpio_get(struct gpio_chip *gc, unsigned off)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ return ucb1400_gpio_get_value(gpio->ac97, off);
+}
+
+static void ucb1400_gpio_set(struct gpio_chip *gc, unsigned off, int val)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_value(gpio->ac97, off, val);
+}
+
+static int ucb1400_gpio_probe(struct platform_device *dev)
+{
+ struct ucb1400_gpio *ucb = dev->dev.platform_data;
+ int err = 0;
+
+ if (!(ucbdata && ucbdata->gpio_offset)) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ platform_set_drvdata(dev, ucb);
+
+ ucb->gc.label = "ucb1400_gpio";
+ ucb->gc.base = ucbdata->gpio_offset;
+ ucb->gc.ngpio = 10;
+ ucb->gc.owner = THIS_MODULE;
+
+ ucb->gc.direction_input = ucb1400_gpio_dir_in;
+ ucb->gc.direction_output = ucb1400_gpio_dir_out;
+ ucb->gc.get = ucb1400_gpio_get;
+ ucb->gc.set = ucb1400_gpio_set;
+ ucb->gc.can_sleep = 1;
+
+ err = gpiochip_add(&ucb->gc);
+ if (err)
+ goto err;
+
+ if (ucbdata && ucbdata->gpio_setup)
+ err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+
+err:
+ return err;
+
+}
+
+static int ucb1400_gpio_remove(struct platform_device *dev)
+{
+ int err = 0;
+ struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
+
+ if (ucbdata && ucbdata->gpio_teardown) {
+ err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+ if (err)
+ return err;
+ }
+
+ err = gpiochip_remove(&ucb->gc);
+ return err;
+}
+
+static struct platform_driver ucb1400_gpio_driver = {
+ .probe = ucb1400_gpio_probe,
+ .remove = ucb1400_gpio_remove,
+ .driver = {
+ .name = "ucb1400_gpio"
+ },
+};
+
+static int __init ucb1400_gpio_init(void)
+{
+ return platform_driver_register(&ucb1400_gpio_driver);
+}
+
+static void __exit ucb1400_gpio_exit(void)
+{
+ platform_driver_unregister(&ucb1400_gpio_driver);
+}
+
+void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
+{
+ ucbdata = data;
+}
+
+module_init(ucb1400_gpio_init);
+module_exit(ucb1400_gpio_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
+MODULE_LICENSE("GPL");