i40e: Separate out DCB capability and enabled flags
Currently if the firmware reports DCB capability the driver enables
I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver
inserts a tag when transmitting a packet from the port even if there
are no DCB traffic classes configured at the port.
This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set
when the DCB capability is present and the existing flag
I40E_FLAG_DCB_ENABLED will be set only if there are more than one
traffic classes configured at the port.
Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index fc1bd10..5a8bbaa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -264,6 +264,7 @@
#ifdef CONFIG_I40E_VXLAN
#define I40E_FLAG_VXLAN_FILTER_SYNC (u64)(1 << 27)
#endif
+#define I40E_FLAG_DCB_CAPABLE (u64)(1 << 29)
/* tracks features that get auto disabled by errors */
u64 auto_disable_flags;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
index 871831a..00bc0cd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
@@ -302,8 +302,8 @@
struct net_device *dev = vsi->netdev;
struct i40e_pf *pf = i40e_netdev_to_pf(dev);
- /* DCB not enabled */
- if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
+ /* Not DCB capable */
+ if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
return;
/* Do not setup DCB NL ops for MFP mode */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 145cb9f..676bebb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4130,7 +4130,11 @@
/* When status is not DISABLED then DCBX in FW */
pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
DCB_CAP_DCBX_VER_IEEE;
- pf->flags |= I40E_FLAG_DCB_ENABLED;
+
+ pf->flags |= I40E_FLAG_DCB_CAPABLE;
+ /* Enable DCB tagging only when more than one TC */
+ if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1)
+ pf->flags |= I40E_FLAG_DCB_ENABLED;
}
} else {
dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
@@ -4685,6 +4689,10 @@
int ret = 0;
u8 type;
+ /* Not DCB capable or capability disabled */
+ if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
+ return ret;
+
/* Ignore if event is not for Nearest Bridge */
type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
& I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
@@ -4726,6 +4734,12 @@
if (!need_reconfig)
goto exit;
+ /* Enable DCB tagging only when more than one TC */
+ if (i40e_dcb_get_num_tc(dcbx_cfg) > 1)
+ pf->flags |= I40E_FLAG_DCB_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+
/* Reconfiguration needed quiesce all VSIs */
i40e_pf_quiesce_all_vsi(pf);
@@ -6365,7 +6379,7 @@
if (err) {
pf->flags &= ~(I40E_FLAG_MSIX_ENABLED |
I40E_FLAG_RSS_ENABLED |
- I40E_FLAG_DCB_ENABLED |
+ I40E_FLAG_DCB_CAPABLE |
I40E_FLAG_SRIOV_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
@@ -8187,13 +8201,13 @@
pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
- I40E_FLAG_DCB_ENABLED |
+ I40E_FLAG_DCB_CAPABLE |
I40E_FLAG_SRIOV_ENABLED |
I40E_FLAG_VMDQ_ENABLED);
} else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
- I40E_FLAG_DCB_ENABLED))) {
+ I40E_FLAG_DCB_CAPABLE))) {
/* one qp for PF */
pf->rss_size = pf->num_lan_qps = 1;
queues_left -= pf->num_lan_qps;
@@ -8205,9 +8219,9 @@
I40E_FLAG_VMDQ_ENABLED);
} else {
/* Not enough queues for all TCs */
- if ((pf->flags & I40E_FLAG_DCB_ENABLED) &&
+ if ((pf->flags & I40E_FLAG_DCB_CAPABLE) &&
(queues_left < I40E_MAX_TRAFFIC_CLASS)) {
- pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n");
}
pf->num_lan_qps = pf->rss_size_max;
@@ -8300,7 +8314,7 @@
buf += sprintf(buf, "FD_SB ");
buf += sprintf(buf, "NTUPLE ");
}
- if (pf->flags & I40E_FLAG_DCB_ENABLED)
+ if (pf->flags & I40E_FLAG_DCB_CAPABLE)
buf += sprintf(buf, "DCB ");
if (pf->flags & I40E_FLAG_PTP)
buf += sprintf(buf, "PTP ");
@@ -8486,7 +8500,7 @@
err = i40e_init_pf_dcb(pf);
if (err) {
dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
- pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
/* Continue without DCB enabled */
}
#endif /* CONFIG_I40E_DCB */