ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide
what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate().
* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it
(aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,
serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode
methods in host drivers that don't (IDE core code guarantees that
->set_dma_mode will be called only for modes which are present
in SWDMA/MWDMA/UDMA masks).
While at it:
* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in
hpt34x/hpt366/pdc202xx_old/serverworks host driver.
There should be no functionality changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 4559e29..3dce800 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -828,38 +828,20 @@
tl[0] = *timings;
tl[1] = *timings2;
- switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- if (pmif->kind == controller_kl_ata4)
- ret = set_timings_udma_ata4(&tl[0], speed);
- else if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
- else
- ret = 1;
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
- break;
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- return;
+ if (speed >= XFER_UDMA_0) {
+ if (pmif->kind == controller_kl_ata4)
+ ret = set_timings_udma_ata4(&tl[0], speed);
+ else if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6)
+ ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
+ else if (pmif->kind == controller_sh_ata6)
+ ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
+ else
+ ret = -1;
+ } else
+ set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- default:
- ret = 1;
- }
if (ret)
return;