ab8500-bm: Quick re-attach charging behaviour
Due to a bug in some AB8500 ASICs charger removal cannot always
be detected if the removal and reinsertion is done to close in time.
This patch detects above described case and handles the situation
so that charging will be kept turned on.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index dcd3c6f..3eb23cf 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -52,6 +52,7 @@
#define VBUS_DET_DBNC100 0x02
#define VBUS_DET_DBNC1 0x01
#define OTP_ENABLE_WD 0x01
+#define DROP_COUNT_RESET 0x01
#define MAIN_CH_INPUT_CURR_SHIFT 4
#define VBUS_IN_CURR_LIM_SHIFT 4
@@ -1678,6 +1679,105 @@
}
/**
+ * ab8500_charger_usb_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the VBUS charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 usbch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+ if (!di->usb.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
+
+ if (!(usbch_ctrl1 & USB_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "Failed to enable VBUS charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * ab8500_charger_ac_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the AC charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 mainch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+ if (!di->ac.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_CTRL1, &mainch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);
+
+ if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to enable AC charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
* ab8500_charger_watchdog_kick() - kick charger watchdog
* @di: pointer to the ab8500_charger structure
*
@@ -1734,8 +1834,7 @@
/* Reset the main and usb drop input current measurement counter */
ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CHARGER_CTRL,
- 0x1);
+ AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
return ret;
@@ -3221,6 +3320,7 @@
di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+ di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
@@ -3242,6 +3342,7 @@
di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+ di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
di->usb_chg.max_out_volt = ab8500_charger_voltage_map[