gpio: stmpe: use BIT() macro
Avoid custom (1 << bits) shifting by consequently using the
BIT() macro from <linux/bitops.h>.
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 432b2ee..e7d422a 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -43,7 +43,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
@@ -59,7 +59,7 @@
struct stmpe *stmpe = stmpe_gpio->stmpe;
int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
u8 reg = stmpe->regs[which + (offset / 8)];
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
/*
* Some variants have single register for gpio set/clear functionality.
@@ -77,7 +77,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
@@ -93,7 +93,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
stmpe_gpio_set(chip, offset, val);
@@ -106,7 +106,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
return stmpe_set_bits(stmpe, reg, mask, 0);
}
@@ -116,10 +116,10 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
- if (stmpe_gpio->norequest_mask & (1 << offset))
+ if (stmpe_gpio->norequest_mask & BIT(offset))
return -EINVAL;
- return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO);
+ return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
}
static const struct gpio_chip template_chip = {
@@ -140,7 +140,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
return -EINVAL;
@@ -218,7 +218,7 @@
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
}
@@ -230,7 +230,7 @@
struct stmpe *stmpe = stmpe_gpio->stmpe;
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] |= mask;
@@ -254,7 +254,7 @@
bool val = !!stmpe_gpio_get(gc, offset);
u8 bank = offset / 8;
u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
int ret;
u8 dir;
@@ -401,7 +401,7 @@
line);
handle_nested_irq(child_irq);
- stat &= ~(1 << bit);
+ stat &= ~BIT(bit);
}
/*