arch/arm64/boot/dts/qcom/sda429-bg-wtp-overlay.dts

/*
 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
/plugin/;

#include "sdm429-spyro-qrd-evt.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. SDA429 QRD BG WTP Overlay";
	compatible = "qcom,sdm429w-qrd", "qcom,sdm429w", "qcom,qrd";
	qcom,msm-id = <437 0x0>;
	qcom,board-id = <0x00010b 8>;
	qcom,pmic-id = <0x0002001b 0x0 0x0 0x0>;
};

&soc {

	qcom,blackghost {
		compatible = "qcom,pil-blackghost";
		qcom,pil-force-shutdown;
		qcom,firmware-name = "bg-wear";
		/* GPIO inputs from blackghost */
		qcom,bg2ap-status-gpio = <&msm_gpio 44 0>;
		qcom,bg2ap-errfatal-gpio = <&msm_gpio 72 0>;
		/* GPIO output to blackghost */
		qcom,ap2bg-status-gpio = <&msm_gpio 61 0>;
		qcom,ap2bg-errfatal-gpio = <&msm_gpio 62 0>;
	};

	qcom,msm-ssc-sensors {
		compatible = "qcom,msm-ssc-sensors";
	};

	qcom,glink-bgcom-xprt-bg {
		compatible = "qcom,glink-bgcom-xprt";
		label = "bg";
		qcom,qos-config = <&glink_qos_bg>;
		qcom,ramp-time = <0x10>,
				     <0x20>,
				     <0x30>,
				     <0x40>;
	};

	glink_qos_bg: qcom,glink-qos-config-bg {
		compatible = "qcom,glink-qos-config";
		qcom,flow-info = <0x80 0x0>,
				 <0x70 0x1>,
				 <0x60 0x2>,
				 <0x50 0x3>;
		qcom,mtu-size = <0x800>;
		qcom,tput-stats-cycle = <0xa>;
	};

	qcom,glink_pkt {
		compatible = "qcom,glinkpkt";

		qcom,glinkpkt-bg-daemon {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "bg-daemon";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon";
		};

		qcom,glinkpkt-bg-display-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl";
		};

		qcom,glinkpkt-bg-display-data {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-data";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data";
		};

		qcom,glinkpkt-bg-rsb-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "RSB_CTRL";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl";
		};

		qcom,glinkpkt-bg-sso-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "sso-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_sso_ctrl";
		};

		qcom,glinkpkt-bg-buzzer-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "buzzer-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_buzzer_ctrl";
		};
	};

	spi@78B8000 {  /* BLSP1 QUP4 */
		status = "ok";
		qcom,bg-spi {
			compatible = "qcom,bg-spi";
			reg = <0>;
			spi-max-frequency = <16000000>;
			interrupt-parent = <&msm_gpio>;
			qcom,irq-gpio = <&msm_gpio 43 1>;
		};
	};

	qcom,bg-rsb {
		compatible = "qcom,bg-rsb";
		vdd-ldo1-supply = <&pm660_l11>;
		vdd-ldo2-supply = <&pm660_l15>;
	};

	qcom,bg-daemon {
		compatible = "qcom,bg-daemon";
		qcom,bg-reset-gpio = <&pm660_gpios 5 0>;
		ssr-reg1-supply = <&pm660_l3>;
		ssr-reg2-supply = <&pm660_l9>;
	};
};

&usb_otg {
	HSUSB_3p3-supply = <&L16A>;
};

&msm_dig_codec {
	cdc-vdd-digital-supply = <&pm660_l11>;
};

&ext_smart_pa {
	dvdd-supply = <&pm660_l11>;
};

&firmware {
	android {
		fstab {
			system {
				status = "disabled";
			};
		};
	};
};