| /* |
| |
| Broadcom B43 wireless driver |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de> |
| Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (c) 2005-2009 Michael Buesch <mb@bu3sch.de> |
| Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| Some parts of the code in this file are derived from the ipw2200 |
| driver Copyright(c) 2003 - 2004 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/moduleparam.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/firmware.h> |
| #include <linux/wireless.h> |
| #include <linux/workqueue.h> |
| #include <linux/skbuff.h> |
| #include <linux/io.h> |
| #include <linux/dma-mapping.h> |
| #include <asm/unaligned.h> |
| |
| #include "b43.h" |
| #include "main.h" |
| #include "debugfs.h" |
| #include "phy_common.h" |
| #include "phy_g.h" |
| #include "phy_n.h" |
| #include "dma.h" |
| #include "pio.h" |
| #include "sysfs.h" |
| #include "xmit.h" |
| #include "lo.h" |
| #include "pcmcia.h" |
| |
| MODULE_DESCRIPTION("Broadcom B43 wireless driver"); |
| MODULE_AUTHOR("Martin Langer"); |
| MODULE_AUTHOR("Stefano Brivio"); |
| MODULE_AUTHOR("Michael Buesch"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID); |
| |
| |
| static int modparam_bad_frames_preempt; |
| module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); |
| MODULE_PARM_DESC(bad_frames_preempt, |
| "enable(1) / disable(0) Bad Frames Preemption"); |
| |
| static char modparam_fwpostfix[16]; |
| module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444); |
| MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load."); |
| |
| static int modparam_hwpctl; |
| module_param_named(hwpctl, modparam_hwpctl, int, 0444); |
| MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)"); |
| |
| static int modparam_nohwcrypt; |
| module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); |
| MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); |
| |
| int b43_modparam_qos = 1; |
| module_param_named(qos, b43_modparam_qos, int, 0444); |
| MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); |
| |
| static int modparam_btcoex = 1; |
| module_param_named(btcoex, modparam_btcoex, int, 0444); |
| MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)"); |
| |
| int b43_modparam_verbose = B43_VERBOSITY_DEFAULT; |
| module_param_named(verbose, b43_modparam_verbose, int, 0644); |
| MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug"); |
| |
| |
| static const struct ssb_device_id b43_ssb_tbl[] = { |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16), |
| SSB_DEVTABLE_END |
| }; |
| |
| MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); |
| |
| /* Channel and ratetables are shared for all devices. |
| * They can't be const, because ieee80211 puts some precalculated |
| * data in there. This data is the same for all devices, so we don't |
| * get concurrency issues */ |
| #define RATETAB_ENT(_rateid, _flags) \ |
| { \ |
| .bitrate = B43_RATE_TO_BASE100KBPS(_rateid), \ |
| .hw_value = (_rateid), \ |
| .flags = (_flags), \ |
| } |
| |
| /* |
| * NOTE: When changing this, sync with xmit.c's |
| * b43_plcp_get_bitrate_idx_* functions! |
| */ |
| static struct ieee80211_rate __b43_ratetable[] = { |
| RATETAB_ENT(B43_CCK_RATE_1MB, 0), |
| RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATETAB_ENT(B43_OFDM_RATE_6MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_9MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_12MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_18MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_24MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_36MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_48MB, 0), |
| RATETAB_ENT(B43_OFDM_RATE_54MB, 0), |
| }; |
| |
| #define b43_a_ratetable (__b43_ratetable + 4) |
| #define b43_a_ratetable_size 8 |
| #define b43_b_ratetable (__b43_ratetable + 0) |
| #define b43_b_ratetable_size 4 |
| #define b43_g_ratetable (__b43_ratetable + 0) |
| #define b43_g_ratetable_size 12 |
| |
| #define CHAN4G(_channel, _freq, _flags) { \ |
| .band = IEEE80211_BAND_2GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| static struct ieee80211_channel b43_2ghz_chantable[] = { |
| CHAN4G(1, 2412, 0), |
| CHAN4G(2, 2417, 0), |
| CHAN4G(3, 2422, 0), |
| CHAN4G(4, 2427, 0), |
| CHAN4G(5, 2432, 0), |
| CHAN4G(6, 2437, 0), |
| CHAN4G(7, 2442, 0), |
| CHAN4G(8, 2447, 0), |
| CHAN4G(9, 2452, 0), |
| CHAN4G(10, 2457, 0), |
| CHAN4G(11, 2462, 0), |
| CHAN4G(12, 2467, 0), |
| CHAN4G(13, 2472, 0), |
| CHAN4G(14, 2484, 0), |
| }; |
| #undef CHAN4G |
| |
| #define CHAN5G(_channel, _flags) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .center_freq = 5000 + (5 * (_channel)), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| static struct ieee80211_channel b43_5ghz_nphy_chantable[] = { |
| CHAN5G(32, 0), CHAN5G(34, 0), |
| CHAN5G(36, 0), CHAN5G(38, 0), |
| CHAN5G(40, 0), CHAN5G(42, 0), |
| CHAN5G(44, 0), CHAN5G(46, 0), |
| CHAN5G(48, 0), CHAN5G(50, 0), |
| CHAN5G(52, 0), CHAN5G(54, 0), |
| CHAN5G(56, 0), CHAN5G(58, 0), |
| CHAN5G(60, 0), CHAN5G(62, 0), |
| CHAN5G(64, 0), CHAN5G(66, 0), |
| CHAN5G(68, 0), CHAN5G(70, 0), |
| CHAN5G(72, 0), CHAN5G(74, 0), |
| CHAN5G(76, 0), CHAN5G(78, 0), |
| CHAN5G(80, 0), CHAN5G(82, 0), |
| CHAN5G(84, 0), CHAN5G(86, 0), |
| CHAN5G(88, 0), CHAN5G(90, 0), |
| CHAN5G(92, 0), CHAN5G(94, 0), |
| CHAN5G(96, 0), CHAN5G(98, 0), |
| CHAN5G(100, 0), CHAN5G(102, 0), |
| CHAN5G(104, 0), CHAN5G(106, 0), |
| CHAN5G(108, 0), CHAN5G(110, 0), |
| CHAN5G(112, 0), CHAN5G(114, 0), |
| CHAN5G(116, 0), CHAN5G(118, 0), |
| CHAN5G(120, 0), CHAN5G(122, 0), |
| CHAN5G(124, 0), CHAN5G(126, 0), |
| CHAN5G(128, 0), CHAN5G(130, 0), |
| CHAN5G(132, 0), CHAN5G(134, 0), |
| CHAN5G(136, 0), CHAN5G(138, 0), |
| CHAN5G(140, 0), CHAN5G(142, 0), |
| CHAN5G(144, 0), CHAN5G(145, 0), |
| CHAN5G(146, 0), CHAN5G(147, 0), |
| CHAN5G(148, 0), CHAN5G(149, 0), |
| CHAN5G(150, 0), CHAN5G(151, 0), |
| CHAN5G(152, 0), CHAN5G(153, 0), |
| CHAN5G(154, 0), CHAN5G(155, 0), |
| CHAN5G(156, 0), CHAN5G(157, 0), |
| CHAN5G(158, 0), CHAN5G(159, 0), |
| CHAN5G(160, 0), CHAN5G(161, 0), |
| CHAN5G(162, 0), CHAN5G(163, 0), |
| CHAN5G(164, 0), CHAN5G(165, 0), |
| CHAN5G(166, 0), CHAN5G(168, 0), |
| CHAN5G(170, 0), CHAN5G(172, 0), |
| CHAN5G(174, 0), CHAN5G(176, 0), |
| CHAN5G(178, 0), CHAN5G(180, 0), |
| CHAN5G(182, 0), CHAN5G(184, 0), |
| CHAN5G(186, 0), CHAN5G(188, 0), |
| CHAN5G(190, 0), CHAN5G(192, 0), |
| CHAN5G(194, 0), CHAN5G(196, 0), |
| CHAN5G(198, 0), CHAN5G(200, 0), |
| CHAN5G(202, 0), CHAN5G(204, 0), |
| CHAN5G(206, 0), CHAN5G(208, 0), |
| CHAN5G(210, 0), CHAN5G(212, 0), |
| CHAN5G(214, 0), CHAN5G(216, 0), |
| CHAN5G(218, 0), CHAN5G(220, 0), |
| CHAN5G(222, 0), CHAN5G(224, 0), |
| CHAN5G(226, 0), CHAN5G(228, 0), |
| }; |
| |
| static struct ieee80211_channel b43_5ghz_aphy_chantable[] = { |
| CHAN5G(34, 0), CHAN5G(36, 0), |
| CHAN5G(38, 0), CHAN5G(40, 0), |
| CHAN5G(42, 0), CHAN5G(44, 0), |
| CHAN5G(46, 0), CHAN5G(48, 0), |
| CHAN5G(52, 0), CHAN5G(56, 0), |
| CHAN5G(60, 0), CHAN5G(64, 0), |
| CHAN5G(100, 0), CHAN5G(104, 0), |
| CHAN5G(108, 0), CHAN5G(112, 0), |
| CHAN5G(116, 0), CHAN5G(120, 0), |
| CHAN5G(124, 0), CHAN5G(128, 0), |
| CHAN5G(132, 0), CHAN5G(136, 0), |
| CHAN5G(140, 0), CHAN5G(149, 0), |
| CHAN5G(153, 0), CHAN5G(157, 0), |
| CHAN5G(161, 0), CHAN5G(165, 0), |
| CHAN5G(184, 0), CHAN5G(188, 0), |
| CHAN5G(192, 0), CHAN5G(196, 0), |
| CHAN5G(200, 0), CHAN5G(204, 0), |
| CHAN5G(208, 0), CHAN5G(212, 0), |
| CHAN5G(216, 0), |
| }; |
| #undef CHAN5G |
| |
| static struct ieee80211_supported_band b43_band_5GHz_nphy = { |
| .band = IEEE80211_BAND_5GHZ, |
| .channels = b43_5ghz_nphy_chantable, |
| .n_channels = ARRAY_SIZE(b43_5ghz_nphy_chantable), |
| .bitrates = b43_a_ratetable, |
| .n_bitrates = b43_a_ratetable_size, |
| }; |
| |
| static struct ieee80211_supported_band b43_band_5GHz_aphy = { |
| .band = IEEE80211_BAND_5GHZ, |
| .channels = b43_5ghz_aphy_chantable, |
| .n_channels = ARRAY_SIZE(b43_5ghz_aphy_chantable), |
| .bitrates = b43_a_ratetable, |
| .n_bitrates = b43_a_ratetable_size, |
| }; |
| |
| static struct ieee80211_supported_band b43_band_2GHz = { |
| .band = IEEE80211_BAND_2GHZ, |
| .channels = b43_2ghz_chantable, |
| .n_channels = ARRAY_SIZE(b43_2ghz_chantable), |
| .bitrates = b43_g_ratetable, |
| .n_bitrates = b43_g_ratetable_size, |
| }; |
| |
| static void b43_wireless_core_exit(struct b43_wldev *dev); |
| static int b43_wireless_core_init(struct b43_wldev *dev); |
| static void b43_wireless_core_stop(struct b43_wldev *dev); |
| static int b43_wireless_core_start(struct b43_wldev *dev); |
| |
| static int b43_ratelimit(struct b43_wl *wl) |
| { |
| if (!wl || !wl->current_dev) |
| return 1; |
| if (b43_status(wl->current_dev) < B43_STAT_STARTED) |
| return 1; |
| /* We are up and running. |
| * Ratelimit the messages to avoid DoS over the net. */ |
| return net_ratelimit(); |
| } |
| |
| void b43info(struct b43_wl *wl, const char *fmt, ...) |
| { |
| va_list args; |
| |
| if (b43_modparam_verbose < B43_VERBOSITY_INFO) |
| return; |
| if (!b43_ratelimit(wl)) |
| return; |
| va_start(args, fmt); |
| printk(KERN_INFO "b43-%s: ", |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| vprintk(fmt, args); |
| va_end(args); |
| } |
| |
| void b43err(struct b43_wl *wl, const char *fmt, ...) |
| { |
| va_list args; |
| |
| if (b43_modparam_verbose < B43_VERBOSITY_ERROR) |
| return; |
| if (!b43_ratelimit(wl)) |
| return; |
| va_start(args, fmt); |
| printk(KERN_ERR "b43-%s ERROR: ", |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| vprintk(fmt, args); |
| va_end(args); |
| } |
| |
| void b43warn(struct b43_wl *wl, const char *fmt, ...) |
| { |
| va_list args; |
| |
| if (b43_modparam_verbose < B43_VERBOSITY_WARN) |
| return; |
| if (!b43_ratelimit(wl)) |
| return; |
| va_start(args, fmt); |
| printk(KERN_WARNING "b43-%s warning: ", |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| vprintk(fmt, args); |
| va_end(args); |
| } |
| |
| void b43dbg(struct b43_wl *wl, const char *fmt, ...) |
| { |
| va_list args; |
| |
| if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) |
| return; |
| va_start(args, fmt); |
| printk(KERN_DEBUG "b43-%s debug: ", |
| (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| vprintk(fmt, args); |
| va_end(args); |
| } |
| |
| static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val) |
| { |
| u32 macctl; |
| |
| B43_WARN_ON(offset % 4 != 0); |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| if (macctl & B43_MACCTL_BE) |
| val = swab32(val); |
| |
| b43_write32(dev, B43_MMIO_RAM_CONTROL, offset); |
| mmiowb(); |
| b43_write32(dev, B43_MMIO_RAM_DATA, val); |
| } |
| |
| static inline void b43_shm_control_word(struct b43_wldev *dev, |
| u16 routing, u16 offset) |
| { |
| u32 control; |
| |
| /* "offset" is the WORD offset. */ |
| control = routing; |
| control <<= 16; |
| control |= offset; |
| b43_write32(dev, B43_MMIO_SHM_CONTROL, control); |
| } |
| |
| u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) |
| { |
| u32 ret; |
| |
| if (routing == B43_SHM_SHARED) { |
| B43_WARN_ON(offset & 0x0001); |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| b43_shm_control_word(dev, routing, offset >> 2); |
| ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); |
| ret <<= 16; |
| b43_shm_control_word(dev, routing, (offset >> 2) + 1); |
| ret |= b43_read16(dev, B43_MMIO_SHM_DATA); |
| |
| goto out; |
| } |
| offset >>= 2; |
| } |
| b43_shm_control_word(dev, routing, offset); |
| ret = b43_read32(dev, B43_MMIO_SHM_DATA); |
| out: |
| return ret; |
| } |
| |
| u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) |
| { |
| struct b43_wl *wl = dev->wl; |
| unsigned long flags; |
| u32 ret; |
| |
| spin_lock_irqsave(&wl->shm_lock, flags); |
| ret = __b43_shm_read32(dev, routing, offset); |
| spin_unlock_irqrestore(&wl->shm_lock, flags); |
| |
| return ret; |
| } |
| |
| u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) |
| { |
| u16 ret; |
| |
| if (routing == B43_SHM_SHARED) { |
| B43_WARN_ON(offset & 0x0001); |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| b43_shm_control_word(dev, routing, offset >> 2); |
| ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); |
| |
| goto out; |
| } |
| offset >>= 2; |
| } |
| b43_shm_control_word(dev, routing, offset); |
| ret = b43_read16(dev, B43_MMIO_SHM_DATA); |
| out: |
| return ret; |
| } |
| |
| u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) |
| { |
| struct b43_wl *wl = dev->wl; |
| unsigned long flags; |
| u16 ret; |
| |
| spin_lock_irqsave(&wl->shm_lock, flags); |
| ret = __b43_shm_read16(dev, routing, offset); |
| spin_unlock_irqrestore(&wl->shm_lock, flags); |
| |
| return ret; |
| } |
| |
| void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) |
| { |
| if (routing == B43_SHM_SHARED) { |
| B43_WARN_ON(offset & 0x0001); |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| b43_shm_control_word(dev, routing, offset >> 2); |
| b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, |
| (value >> 16) & 0xffff); |
| b43_shm_control_word(dev, routing, (offset >> 2) + 1); |
| b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); |
| return; |
| } |
| offset >>= 2; |
| } |
| b43_shm_control_word(dev, routing, offset); |
| b43_write32(dev, B43_MMIO_SHM_DATA, value); |
| } |
| |
| void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) |
| { |
| struct b43_wl *wl = dev->wl; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wl->shm_lock, flags); |
| __b43_shm_write32(dev, routing, offset, value); |
| spin_unlock_irqrestore(&wl->shm_lock, flags); |
| } |
| |
| void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) |
| { |
| if (routing == B43_SHM_SHARED) { |
| B43_WARN_ON(offset & 0x0001); |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| b43_shm_control_word(dev, routing, offset >> 2); |
| b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); |
| return; |
| } |
| offset >>= 2; |
| } |
| b43_shm_control_word(dev, routing, offset); |
| b43_write16(dev, B43_MMIO_SHM_DATA, value); |
| } |
| |
| void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) |
| { |
| struct b43_wl *wl = dev->wl; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wl->shm_lock, flags); |
| __b43_shm_write16(dev, routing, offset, value); |
| spin_unlock_irqrestore(&wl->shm_lock, flags); |
| } |
| |
| /* Read HostFlags */ |
| u64 b43_hf_read(struct b43_wldev *dev) |
| { |
| u64 ret; |
| |
| ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI); |
| ret <<= 16; |
| ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI); |
| ret <<= 16; |
| ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO); |
| |
| return ret; |
| } |
| |
| /* Write HostFlags */ |
| void b43_hf_write(struct b43_wldev *dev, u64 value) |
| { |
| u16 lo, mi, hi; |
| |
| lo = (value & 0x00000000FFFFULL); |
| mi = (value & 0x0000FFFF0000ULL) >> 16; |
| hi = (value & 0xFFFF00000000ULL) >> 32; |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); |
| } |
| |
| void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) |
| { |
| u32 low, high; |
| |
| B43_WARN_ON(dev->dev->id.revision < 3); |
| |
| /* The hardware guarantees us an atomic read, if we |
| * read the low register first. */ |
| low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); |
| high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); |
| |
| *tsf = high; |
| *tsf <<= 32; |
| *tsf |= low; |
| } |
| |
| static void b43_time_lock(struct b43_wldev *dev) |
| { |
| u32 macctl; |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl |= B43_MACCTL_TBTTHOLD; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| /* Commit the write */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| } |
| |
| static void b43_time_unlock(struct b43_wldev *dev) |
| { |
| u32 macctl; |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl &= ~B43_MACCTL_TBTTHOLD; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| /* Commit the write */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| } |
| |
| static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) |
| { |
| u32 low, high; |
| |
| B43_WARN_ON(dev->dev->id.revision < 3); |
| |
| low = tsf; |
| high = (tsf >> 32); |
| /* The hardware guarantees us an atomic write, if we |
| * write the low register first. */ |
| b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low); |
| mmiowb(); |
| b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high); |
| mmiowb(); |
| } |
| |
| void b43_tsf_write(struct b43_wldev *dev, u64 tsf) |
| { |
| b43_time_lock(dev); |
| b43_tsf_write_locked(dev, tsf); |
| b43_time_unlock(dev); |
| } |
| |
| static |
| void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac) |
| { |
| static const u8 zero_addr[ETH_ALEN] = { 0 }; |
| u16 data; |
| |
| if (!mac) |
| mac = zero_addr; |
| |
| offset |= 0x0020; |
| b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset); |
| |
| data = mac[0]; |
| data |= mac[1] << 8; |
| b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| data = mac[2]; |
| data |= mac[3] << 8; |
| b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| data = mac[4]; |
| data |= mac[5] << 8; |
| b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| } |
| |
| static void b43_write_mac_bssid_templates(struct b43_wldev *dev) |
| { |
| const u8 *mac; |
| const u8 *bssid; |
| u8 mac_bssid[ETH_ALEN * 2]; |
| int i; |
| u32 tmp; |
| |
| bssid = dev->wl->bssid; |
| mac = dev->wl->mac_addr; |
| |
| b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid); |
| |
| memcpy(mac_bssid, mac, ETH_ALEN); |
| memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); |
| |
| /* Write our MAC address and BSSID to template ram */ |
| for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) { |
| tmp = (u32) (mac_bssid[i + 0]); |
| tmp |= (u32) (mac_bssid[i + 1]) << 8; |
| tmp |= (u32) (mac_bssid[i + 2]) << 16; |
| tmp |= (u32) (mac_bssid[i + 3]) << 24; |
| b43_ram_write(dev, 0x20 + i, tmp); |
| } |
| } |
| |
| static void b43_upload_card_macaddress(struct b43_wldev *dev) |
| { |
| b43_write_mac_bssid_templates(dev); |
| b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr); |
| } |
| |
| static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) |
| { |
| /* slot_time is in usec. */ |
| if (dev->phy.type != B43_PHYTYPE_G) |
| return; |
| b43_write16(dev, 0x684, 510 + slot_time); |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); |
| } |
| |
| static void b43_short_slot_timing_enable(struct b43_wldev *dev) |
| { |
| b43_set_slot_time(dev, 9); |
| } |
| |
| static void b43_short_slot_timing_disable(struct b43_wldev *dev) |
| { |
| b43_set_slot_time(dev, 20); |
| } |
| |
| /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. |
| * Returns the _previously_ enabled IRQ mask. |
| */ |
| static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask) |
| { |
| u32 old_mask; |
| |
| old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask); |
| |
| return old_mask; |
| } |
| |
| /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. |
| * Returns the _previously_ enabled IRQ mask. |
| */ |
| static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask) |
| { |
| u32 old_mask; |
| |
| old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask); |
| |
| return old_mask; |
| } |
| |
| /* Synchronize IRQ top- and bottom-half. |
| * IRQs must be masked before calling this. |
| * This must not be called with the irq_lock held. |
| */ |
| static void b43_synchronize_irq(struct b43_wldev *dev) |
| { |
| synchronize_irq(dev->dev->irq); |
| tasklet_kill(&dev->isr_tasklet); |
| } |
| |
| /* DummyTransmission function, as documented on |
| * http://bcm-specs.sipsolutions.net/DummyTransmission |
| */ |
| void b43_dummy_transmission(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| struct b43_phy *phy = &dev->phy; |
| unsigned int i, max_loop; |
| u16 value; |
| u32 buffer[5] = { |
| 0x00000000, |
| 0x00D40000, |
| 0x00000000, |
| 0x01000000, |
| 0x00000000, |
| }; |
| |
| switch (phy->type) { |
| case B43_PHYTYPE_A: |
| max_loop = 0x1E; |
| buffer[0] = 0x000201CC; |
| break; |
| case B43_PHYTYPE_B: |
| case B43_PHYTYPE_G: |
| max_loop = 0xFA; |
| buffer[0] = 0x000B846E; |
| break; |
| default: |
| B43_WARN_ON(1); |
| return; |
| } |
| |
| spin_lock_irq(&wl->irq_lock); |
| write_lock(&wl->tx_lock); |
| |
| for (i = 0; i < 5; i++) |
| b43_ram_write(dev, i * 4, buffer[i]); |
| |
| /* Commit writes */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| |
| b43_write16(dev, 0x0568, 0x0000); |
| b43_write16(dev, 0x07C0, 0x0000); |
| value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0); |
| b43_write16(dev, 0x050C, value); |
| b43_write16(dev, 0x0508, 0x0000); |
| b43_write16(dev, 0x050A, 0x0000); |
| b43_write16(dev, 0x054C, 0x0000); |
| b43_write16(dev, 0x056A, 0x0014); |
| b43_write16(dev, 0x0568, 0x0826); |
| b43_write16(dev, 0x0500, 0x0000); |
| b43_write16(dev, 0x0502, 0x0030); |
| |
| if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) |
| b43_radio_write16(dev, 0x0051, 0x0017); |
| for (i = 0x00; i < max_loop; i++) { |
| value = b43_read16(dev, 0x050E); |
| if (value & 0x0080) |
| break; |
| udelay(10); |
| } |
| for (i = 0x00; i < 0x0A; i++) { |
| value = b43_read16(dev, 0x050E); |
| if (value & 0x0400) |
| break; |
| udelay(10); |
| } |
| for (i = 0x00; i < 0x19; i++) { |
| value = b43_read16(dev, 0x0690); |
| if (!(value & 0x0100)) |
| break; |
| udelay(10); |
| } |
| if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) |
| b43_radio_write16(dev, 0x0051, 0x0037); |
| |
| write_unlock(&wl->tx_lock); |
| spin_unlock_irq(&wl->irq_lock); |
| } |
| |
| static void key_write(struct b43_wldev *dev, |
| u8 index, u8 algorithm, const u8 *key) |
| { |
| unsigned int i; |
| u32 offset; |
| u16 value; |
| u16 kidx; |
| |
| /* Key index/algo block */ |
| kidx = b43_kidx_to_fw(dev, index); |
| value = ((kidx << 4) | algorithm); |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value); |
| |
| /* Write the key to the Key Table Pointer offset */ |
| offset = dev->ktp + (index * B43_SEC_KEYSIZE); |
| for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { |
| value = key[i]; |
| value |= (u16) (key[i + 1]) << 8; |
| b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value); |
| } |
| } |
| |
| static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr) |
| { |
| u32 addrtmp[2] = { 0, 0, }; |
| u8 per_sta_keys_start = 8; |
| |
| if (b43_new_kidx_api(dev)) |
| per_sta_keys_start = 4; |
| |
| B43_WARN_ON(index < per_sta_keys_start); |
| /* We have two default TX keys and possibly two default RX keys. |
| * Physical mac 0 is mapped to physical key 4 or 8, depending |
| * on the firmware version. |
| * So we must adjust the index here. |
| */ |
| index -= per_sta_keys_start; |
| |
| if (addr) { |
| addrtmp[0] = addr[0]; |
| addrtmp[0] |= ((u32) (addr[1]) << 8); |
| addrtmp[0] |= ((u32) (addr[2]) << 16); |
| addrtmp[0] |= ((u32) (addr[3]) << 24); |
| addrtmp[1] = addr[4]; |
| addrtmp[1] |= ((u32) (addr[5]) << 8); |
| } |
| |
| if (dev->dev->id.revision >= 5) { |
| /* Receive match transmitter address mechanism */ |
| b43_shm_write32(dev, B43_SHM_RCMTA, |
| (index * 2) + 0, addrtmp[0]); |
| b43_shm_write16(dev, B43_SHM_RCMTA, |
| (index * 2) + 1, addrtmp[1]); |
| } else { |
| /* RXE (Receive Engine) and |
| * PSM (Programmable State Machine) mechanism |
| */ |
| if (index < 8) { |
| /* TODO write to RCM 16, 19, 22 and 25 */ |
| } else { |
| b43_shm_write32(dev, B43_SHM_SHARED, |
| B43_SHM_SH_PSM + (index * 6) + 0, |
| addrtmp[0]); |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_PSM + (index * 6) + 4, |
| addrtmp[1]); |
| } |
| } |
| } |
| |
| static void do_key_write(struct b43_wldev *dev, |
| u8 index, u8 algorithm, |
| const u8 *key, size_t key_len, const u8 *mac_addr) |
| { |
| u8 buf[B43_SEC_KEYSIZE] = { 0, }; |
| u8 per_sta_keys_start = 8; |
| |
| if (b43_new_kidx_api(dev)) |
| per_sta_keys_start = 4; |
| |
| B43_WARN_ON(index >= dev->max_nr_keys); |
| B43_WARN_ON(key_len > B43_SEC_KEYSIZE); |
| |
| if (index >= per_sta_keys_start) |
| keymac_write(dev, index, NULL); /* First zero out mac. */ |
| if (key) |
| memcpy(buf, key, key_len); |
| key_write(dev, index, algorithm, buf); |
| if (index >= per_sta_keys_start) |
| keymac_write(dev, index, mac_addr); |
| |
| dev->key[index].algorithm = algorithm; |
| } |
| |
| static int b43_key_write(struct b43_wldev *dev, |
| int index, u8 algorithm, |
| const u8 *key, size_t key_len, |
| const u8 *mac_addr, |
| struct ieee80211_key_conf *keyconf) |
| { |
| int i; |
| int sta_keys_start; |
| |
| if (key_len > B43_SEC_KEYSIZE) |
| return -EINVAL; |
| for (i = 0; i < dev->max_nr_keys; i++) { |
| /* Check that we don't already have this key. */ |
| B43_WARN_ON(dev->key[i].keyconf == keyconf); |
| } |
| if (index < 0) { |
| /* Pairwise key. Get an empty slot for the key. */ |
| if (b43_new_kidx_api(dev)) |
| sta_keys_start = 4; |
| else |
| sta_keys_start = 8; |
| for (i = sta_keys_start; i < dev->max_nr_keys; i++) { |
| if (!dev->key[i].keyconf) { |
| /* found empty */ |
| index = i; |
| break; |
| } |
| } |
| if (index < 0) { |
| b43warn(dev->wl, "Out of hardware key memory\n"); |
| return -ENOSPC; |
| } |
| } else |
| B43_WARN_ON(index > 3); |
| |
| do_key_write(dev, index, algorithm, key, key_len, mac_addr); |
| if ((index <= 3) && !b43_new_kidx_api(dev)) { |
| /* Default RX key */ |
| B43_WARN_ON(mac_addr); |
| do_key_write(dev, index + 4, algorithm, key, key_len, NULL); |
| } |
| keyconf->hw_key_idx = index; |
| dev->key[index].keyconf = keyconf; |
| |
| return 0; |
| } |
| |
| static int b43_key_clear(struct b43_wldev *dev, int index) |
| { |
| if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys))) |
| return -EINVAL; |
| do_key_write(dev, index, B43_SEC_ALGO_NONE, |
| NULL, B43_SEC_KEYSIZE, NULL); |
| if ((index <= 3) && !b43_new_kidx_api(dev)) { |
| do_key_write(dev, index + 4, B43_SEC_ALGO_NONE, |
| NULL, B43_SEC_KEYSIZE, NULL); |
| } |
| dev->key[index].keyconf = NULL; |
| |
| return 0; |
| } |
| |
| static void b43_clear_keys(struct b43_wldev *dev) |
| { |
| int i; |
| |
| for (i = 0; i < dev->max_nr_keys; i++) |
| b43_key_clear(dev, i); |
| } |
| |
| static void b43_dump_keymemory(struct b43_wldev *dev) |
| { |
| unsigned int i, index, offset; |
| DECLARE_MAC_BUF(macbuf); |
| u8 mac[ETH_ALEN]; |
| u16 algo; |
| u32 rcmta0; |
| u16 rcmta1; |
| u64 hf; |
| struct b43_key *key; |
| |
| if (!b43_debug(dev, B43_DBG_KEYS)) |
| return; |
| |
| hf = b43_hf_read(dev); |
| b43dbg(dev->wl, "Hardware key memory dump: USEDEFKEYS=%u\n", |
| !!(hf & B43_HF_USEDEFKEYS)); |
| for (index = 0; index < dev->max_nr_keys; index++) { |
| key = &(dev->key[index]); |
| printk(KERN_DEBUG "Key slot %02u: %s", |
| index, (key->keyconf == NULL) ? " " : "*"); |
| offset = dev->ktp + (index * B43_SEC_KEYSIZE); |
| for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { |
| u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i); |
| printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); |
| } |
| |
| algo = b43_shm_read16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_KEYIDXBLOCK + (index * 2)); |
| printk(" Algo: %04X/%02X", algo, key->algorithm); |
| |
| if (index >= 4) { |
| rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA, |
| ((index - 4) * 2) + 0); |
| rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA, |
| ((index - 4) * 2) + 1); |
| *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0); |
| *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1); |
| printk(" MAC: %s", |
| print_mac(macbuf, mac)); |
| } else |
| printk(" DEFAULT KEY"); |
| printk("\n"); |
| } |
| } |
| |
| void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) |
| { |
| u32 macctl; |
| u16 ucstat; |
| bool hwps; |
| bool awake; |
| int i; |
| |
| B43_WARN_ON((ps_flags & B43_PS_ENABLED) && |
| (ps_flags & B43_PS_DISABLED)); |
| B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP)); |
| |
| if (ps_flags & B43_PS_ENABLED) { |
| hwps = 1; |
| } else if (ps_flags & B43_PS_DISABLED) { |
| hwps = 0; |
| } else { |
| //TODO: If powersave is not off and FIXME is not set and we are not in adhoc |
| // and thus is not an AP and we are associated, set bit 25 |
| } |
| if (ps_flags & B43_PS_AWAKE) { |
| awake = 1; |
| } else if (ps_flags & B43_PS_ASLEEP) { |
| awake = 0; |
| } else { |
| //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, |
| // or we are associated, or FIXME, or the latest PS-Poll packet sent was |
| // successful, set bit26 |
| } |
| |
| /* FIXME: For now we force awake-on and hwps-off */ |
| hwps = 0; |
| awake = 1; |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| if (hwps) |
| macctl |= B43_MACCTL_HWPS; |
| else |
| macctl &= ~B43_MACCTL_HWPS; |
| if (awake) |
| macctl |= B43_MACCTL_AWAKE; |
| else |
| macctl &= ~B43_MACCTL_AWAKE; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| /* Commit write */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| if (awake && dev->dev->id.revision >= 5) { |
| /* Wait for the microcode to wake up. */ |
| for (i = 0; i < 100; i++) { |
| ucstat = b43_shm_read16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_UCODESTAT); |
| if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP) |
| break; |
| udelay(10); |
| } |
| } |
| } |
| |
| void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) |
| { |
| u32 tmslow; |
| u32 macctl; |
| |
| flags |= B43_TMSLOW_PHYCLKEN; |
| flags |= B43_TMSLOW_PHYRESET; |
| ssb_device_enable(dev->dev, flags); |
| msleep(2); /* Wait for the PLL to turn on. */ |
| |
| /* Now take the PHY out of Reset again */ |
| tmslow = ssb_read32(dev->dev, SSB_TMSLOW); |
| tmslow |= SSB_TMSLOW_FGC; |
| tmslow &= ~B43_TMSLOW_PHYRESET; |
| ssb_write32(dev->dev, SSB_TMSLOW, tmslow); |
| ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ |
| msleep(1); |
| tmslow &= ~SSB_TMSLOW_FGC; |
| ssb_write32(dev->dev, SSB_TMSLOW, tmslow); |
| ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ |
| msleep(1); |
| |
| /* Turn Analog ON, but only if we already know the PHY-type. |
| * This protects against very early setup where we don't know the |
| * PHY-type, yet. wireless_core_reset will be called once again later, |
| * when we know the PHY-type. */ |
| if (dev->phy.ops) |
| dev->phy.ops->switch_analog(dev, 1); |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl &= ~B43_MACCTL_GMODE; |
| if (flags & B43_TMSLOW_GMODE) |
| macctl |= B43_MACCTL_GMODE; |
| macctl |= B43_MACCTL_IHR_ENABLED; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| } |
| |
| static void handle_irq_transmit_status(struct b43_wldev *dev) |
| { |
| u32 v0, v1; |
| u16 tmp; |
| struct b43_txstatus stat; |
| |
| while (1) { |
| v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0); |
| if (!(v0 & 0x00000001)) |
| break; |
| v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1); |
| |
| stat.cookie = (v0 >> 16); |
| stat.seq = (v1 & 0x0000FFFF); |
| stat.phy_stat = ((v1 & 0x00FF0000) >> 16); |
| tmp = (v0 & 0x0000FFFF); |
| stat.frame_count = ((tmp & 0xF000) >> 12); |
| stat.rts_count = ((tmp & 0x0F00) >> 8); |
| stat.supp_reason = ((tmp & 0x001C) >> 2); |
| stat.pm_indicated = !!(tmp & 0x0080); |
| stat.intermediate = !!(tmp & 0x0040); |
| stat.for_ampdu = !!(tmp & 0x0020); |
| stat.acked = !!(tmp & 0x0002); |
| |
| b43_handle_txstatus(dev, &stat); |
| } |
| } |
| |
| static void drain_txstatus_queue(struct b43_wldev *dev) |
| { |
| u32 dummy; |
| |
| if (dev->dev->id.revision < 5) |
| return; |
| /* Read all entries from the microcode TXstatus FIFO |
| * and throw them away. |
| */ |
| while (1) { |
| dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0); |
| if (!(dummy & 0x00000001)) |
| break; |
| dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1); |
| } |
| } |
| |
| static u32 b43_jssi_read(struct b43_wldev *dev) |
| { |
| u32 val = 0; |
| |
| val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A); |
| val <<= 16; |
| val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088); |
| |
| return val; |
| } |
| |
| static void b43_jssi_write(struct b43_wldev *dev, u32 jssi) |
| { |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF)); |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16); |
| } |
| |
| static void b43_generate_noise_sample(struct b43_wldev *dev) |
| { |
| b43_jssi_write(dev, 0x7F7F7F7F); |
| b43_write32(dev, B43_MMIO_MACCMD, |
| b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); |
| } |
| |
| static void b43_calculate_link_quality(struct b43_wldev *dev) |
| { |
| /* Top half of Link Quality calculation. */ |
| |
| if (dev->phy.type != B43_PHYTYPE_G) |
| return; |
| if (dev->noisecalc.calculation_running) |
| return; |
| dev->noisecalc.calculation_running = 1; |
| dev->noisecalc.nr_samples = 0; |
| |
| b43_generate_noise_sample(dev); |
| } |
| |
| static void handle_irq_noise(struct b43_wldev *dev) |
| { |
| struct b43_phy_g *phy = dev->phy.g; |
| u16 tmp; |
| u8 noise[4]; |
| u8 i, j; |
| s32 average; |
| |
| /* Bottom half of Link Quality calculation. */ |
| |
| if (dev->phy.type != B43_PHYTYPE_G) |
| return; |
| |
| /* Possible race condition: It might be possible that the user |
| * changed to a different channel in the meantime since we |
| * started the calculation. We ignore that fact, since it's |
| * not really that much of a problem. The background noise is |
| * an estimation only anyway. Slightly wrong results will get damped |
| * by the averaging of the 8 sample rounds. Additionally the |
| * value is shortlived. So it will be replaced by the next noise |
| * calculation round soon. */ |
| |
| B43_WARN_ON(!dev->noisecalc.calculation_running); |
| *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); |
| if (noise[0] == 0x7F || noise[1] == 0x7F || |
| noise[2] == 0x7F || noise[3] == 0x7F) |
| goto generate_new; |
| |
| /* Get the noise samples. */ |
| B43_WARN_ON(dev->noisecalc.nr_samples >= 8); |
| i = dev->noisecalc.nr_samples; |
| noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]]; |
| dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]]; |
| dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]]; |
| dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]]; |
| dev->noisecalc.nr_samples++; |
| if (dev->noisecalc.nr_samples == 8) { |
| /* Calculate the Link Quality by the noise samples. */ |
| average = 0; |
| for (i = 0; i < 8; i++) { |
| for (j = 0; j < 4; j++) |
| average += dev->noisecalc.samples[i][j]; |
| } |
| average /= (8 * 4); |
| average *= 125; |
| average += 64; |
| average /= 128; |
| tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C); |
| tmp = (tmp / 128) & 0x1F; |
| if (tmp >= 8) |
| average += 2; |
| else |
| average -= 25; |
| if (tmp == 8) |
| average -= 72; |
| else |
| average -= 48; |
| |
| dev->stats.link_noise = average; |
| dev->noisecalc.calculation_running = 0; |
| return; |
| } |
| generate_new: |
| b43_generate_noise_sample(dev); |
| } |
| |
| static void handle_irq_tbtt_indication(struct b43_wldev *dev) |
| { |
| if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { |
| ///TODO: PS TBTT |
| } else { |
| if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) |
| b43_power_saving_ctl_bits(dev, 0); |
| } |
| if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) |
| dev->dfq_valid = 1; |
| } |
| |
| static void handle_irq_atim_end(struct b43_wldev *dev) |
| { |
| if (dev->dfq_valid) { |
| b43_write32(dev, B43_MMIO_MACCMD, |
| b43_read32(dev, B43_MMIO_MACCMD) |
| | B43_MACCMD_DFQ_VALID); |
| dev->dfq_valid = 0; |
| } |
| } |
| |
| static void handle_irq_pmq(struct b43_wldev *dev) |
| { |
| u32 tmp; |
| |
| //TODO: AP mode. |
| |
| while (1) { |
| tmp = b43_read32(dev, B43_MMIO_PS_STATUS); |
| if (!(tmp & 0x00000008)) |
| break; |
| } |
| /* 16bit write is odd, but correct. */ |
| b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002); |
| } |
| |
| static void b43_write_template_common(struct b43_wldev *dev, |
| const u8 *data, u16 size, |
| u16 ram_offset, |
| u16 shm_size_offset, u8 rate) |
| { |
| u32 i, tmp; |
| struct b43_plcp_hdr4 plcp; |
| |
| plcp.data = 0; |
| b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); |
| b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data)); |
| ram_offset += sizeof(u32); |
| /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet. |
| * So leave the first two bytes of the next write blank. |
| */ |
| tmp = (u32) (data[0]) << 16; |
| tmp |= (u32) (data[1]) << 24; |
| b43_ram_write(dev, ram_offset, tmp); |
| ram_offset += sizeof(u32); |
| for (i = 2; i < size; i += sizeof(u32)) { |
| tmp = (u32) (data[i + 0]); |
| if (i + 1 < size) |
| tmp |= (u32) (data[i + 1]) << 8; |
| if (i + 2 < size) |
| tmp |= (u32) (data[i + 2]) << 16; |
| if (i + 3 < size) |
| tmp |= (u32) (data[i + 3]) << 24; |
| b43_ram_write(dev, ram_offset + i - 2, tmp); |
| } |
| b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset, |
| size + sizeof(struct b43_plcp_hdr6)); |
| } |
| |
| /* Check if the use of the antenna that ieee80211 told us to |
| * use is possible. This will fall back to DEFAULT. |
| * "antenna_nr" is the antenna identifier we got from ieee80211. */ |
| u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, |
| u8 antenna_nr) |
| { |
| u8 antenna_mask; |
| |
| if (antenna_nr == 0) { |
| /* Zero means "use default antenna". That's always OK. */ |
| return 0; |
| } |
| |
| /* Get the mask of available antennas. */ |
| if (dev->phy.gmode) |
| antenna_mask = dev->dev->bus->sprom.ant_available_bg; |
| else |
| antenna_mask = dev->dev->bus->sprom.ant_available_a; |
| |
| if (!(antenna_mask & (1 << (antenna_nr - 1)))) { |
| /* This antenna is not available. Fall back to default. */ |
| return 0; |
| } |
| |
| return antenna_nr; |
| } |
| |
| /* Convert a b43 antenna number value to the PHY TX control value. */ |
| static u16 b43_antenna_to_phyctl(int antenna) |
| { |
| switch (antenna) { |
| case B43_ANTENNA0: |
| return B43_TXH_PHY_ANT0; |
| case B43_ANTENNA1: |
| return B43_TXH_PHY_ANT1; |
| case B43_ANTENNA2: |
| return B43_TXH_PHY_ANT2; |
| case B43_ANTENNA3: |
| return B43_TXH_PHY_ANT3; |
| case B43_ANTENNA_AUTO: |
| return B43_TXH_PHY_ANT01AUTO; |
| } |
| B43_WARN_ON(1); |
| return 0; |
| } |
| |
| static void b43_write_beacon_template(struct b43_wldev *dev, |
| u16 ram_offset, |
| u16 shm_size_offset) |
| { |
| unsigned int i, len, variable_len; |
| const struct ieee80211_mgmt *bcn; |
| const u8 *ie; |
| bool tim_found = 0; |
| unsigned int rate; |
| u16 ctl; |
| int antenna; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon); |
| |
| bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); |
| len = min((size_t) dev->wl->current_beacon->len, |
| 0x200 - sizeof(struct b43_plcp_hdr6)); |
| rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value; |
| |
| b43_write_template_common(dev, (const u8 *)bcn, |
| len, ram_offset, shm_size_offset, rate); |
| |
| /* Write the PHY TX control parameters. */ |
| antenna = B43_ANTENNA_DEFAULT; |
| antenna = b43_antenna_to_phyctl(antenna); |
| ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); |
| /* We can't send beacons with short preamble. Would get PHY errors. */ |
| ctl &= ~B43_TXH_PHY_SHORTPRMBL; |
| ctl &= ~B43_TXH_PHY_ANT; |
| ctl &= ~B43_TXH_PHY_ENC; |
| ctl |= antenna; |
| if (b43_is_cck_rate(rate)) |
| ctl |= B43_TXH_PHY_ENC_CCK; |
| else |
| ctl |= B43_TXH_PHY_ENC_OFDM; |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); |
| |
| /* Find the position of the TIM and the DTIM_period value |
| * and write them to SHM. */ |
| ie = bcn->u.beacon.variable; |
| variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable); |
| for (i = 0; i < variable_len - 2; ) { |
| uint8_t ie_id, ie_len; |
| |
| ie_id = ie[i]; |
| ie_len = ie[i + 1]; |
| if (ie_id == 5) { |
| u16 tim_position; |
| u16 dtim_period; |
| /* This is the TIM Information Element */ |
| |
| /* Check whether the ie_len is in the beacon data range. */ |
| if (variable_len < ie_len + 2 + i) |
| break; |
| /* A valid TIM is at least 4 bytes long. */ |
| if (ie_len < 4) |
| break; |
| tim_found = 1; |
| |
| tim_position = sizeof(struct b43_plcp_hdr6); |
| tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable); |
| tim_position += i; |
| |
| dtim_period = ie[i + 3]; |
| |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_TIMBPOS, tim_position); |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_DTIMPER, dtim_period); |
| break; |
| } |
| i += ie_len + 2; |
| } |
| if (!tim_found) { |
| /* |
| * If ucode wants to modify TIM do it behind the beacon, this |
| * will happen, for example, when doing mesh networking. |
| */ |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_TIMBPOS, |
| len + sizeof(struct b43_plcp_hdr6)); |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_DTIMPER, 0); |
| } |
| b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset); |
| } |
| |
| static void b43_write_probe_resp_plcp(struct b43_wldev *dev, |
| u16 shm_offset, u16 size, |
| struct ieee80211_rate *rate) |
| { |
| struct b43_plcp_hdr4 plcp; |
| u32 tmp; |
| __le16 dur; |
| |
| plcp.data = 0; |
| b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); |
| dur = ieee80211_generic_frame_duration(dev->wl->hw, |
| dev->wl->vif, size, |
| rate); |
| /* Write PLCP in two parts and timing for packet transfer */ |
| tmp = le32_to_cpu(plcp.data); |
| b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); |
| b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16); |
| b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur)); |
| } |
| |
| /* Instead of using custom probe response template, this function |
| * just patches custom beacon template by: |
| * 1) Changing packet type |
| * 2) Patching duration field |
| * 3) Stripping TIM |
| */ |
| static const u8 *b43_generate_probe_resp(struct b43_wldev *dev, |
| u16 *dest_size, |
| struct ieee80211_rate *rate) |
| { |
| const u8 *src_data; |
| u8 *dest_data; |
| u16 src_size, elem_size, src_pos, dest_pos; |
| __le16 dur; |
| struct ieee80211_hdr *hdr; |
| size_t ie_start; |
| |
| src_size = dev->wl->current_beacon->len; |
| src_data = (const u8 *)dev->wl->current_beacon->data; |
| |
| /* Get the start offset of the variable IEs in the packet. */ |
| ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); |
| B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable)); |
| |
| if (B43_WARN_ON(src_size < ie_start)) |
| return NULL; |
| |
| dest_data = kmalloc(src_size, GFP_ATOMIC); |
| if (unlikely(!dest_data)) |
| return NULL; |
| |
| /* Copy the static data and all Information Elements, except the TIM. */ |
| memcpy(dest_data, src_data, ie_start); |
| src_pos = ie_start; |
| dest_pos = ie_start; |
| for ( ; src_pos < src_size - 2; src_pos += elem_size) { |
| elem_size = src_data[src_pos + 1] + 2; |
| if (src_data[src_pos] == 5) { |
| /* This is the TIM. */ |
| continue; |
| } |
| memcpy(dest_data + dest_pos, src_data + src_pos, |
| elem_size); |
| dest_pos += elem_size; |
| } |
| *dest_size = dest_pos; |
| hdr = (struct ieee80211_hdr *)dest_data; |
| |
| /* Set the frame control. */ |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_PROBE_RESP); |
| dur = ieee80211_generic_frame_duration(dev->wl->hw, |
| dev->wl->vif, *dest_size, |
| rate); |
| hdr->duration_id = dur; |
| |
| return dest_data; |
| } |
| |
| static void b43_write_probe_resp_template(struct b43_wldev *dev, |
| u16 ram_offset, |
| u16 shm_size_offset, |
| struct ieee80211_rate *rate) |
| { |
| const u8 *probe_resp_data; |
| u16 size; |
| |
| size = dev->wl->current_beacon->len; |
| probe_resp_data = b43_generate_probe_resp(dev, &size, rate); |
| if (unlikely(!probe_resp_data)) |
| return; |
| |
| /* Looks like PLCP headers plus packet timings are stored for |
| * all possible basic rates |
| */ |
| b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]); |
| b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]); |
| b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]); |
| b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]); |
| |
| size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); |
| b43_write_template_common(dev, probe_resp_data, |
| size, ram_offset, shm_size_offset, |
| rate->hw_value); |
| kfree(probe_resp_data); |
| } |
| |
| static void b43_upload_beacon0(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| |
| if (wl->beacon0_uploaded) |
| return; |
| b43_write_beacon_template(dev, 0x68, 0x18); |
| /* FIXME: Probe resp upload doesn't really belong here, |
| * but we don't use that feature anyway. */ |
| b43_write_probe_resp_template(dev, 0x268, 0x4A, |
| &__b43_ratetable[3]); |
| wl->beacon0_uploaded = 1; |
| } |
| |
| static void b43_upload_beacon1(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| |
| if (wl->beacon1_uploaded) |
| return; |
| b43_write_beacon_template(dev, 0x468, 0x1A); |
| wl->beacon1_uploaded = 1; |
| } |
| |
| static void handle_irq_beacon(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| u32 cmd, beacon0_valid, beacon1_valid; |
| |
| if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && |
| !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) |
| return; |
| |
| /* This is the bottom half of the asynchronous beacon update. */ |
| |
| /* Ignore interrupt in the future. */ |
| dev->irq_savedstate &= ~B43_IRQ_BEACON; |
| |
| cmd = b43_read32(dev, B43_MMIO_MACCMD); |
| beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID); |
| beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID); |
| |
| /* Schedule interrupt manually, if busy. */ |
| if (beacon0_valid && beacon1_valid) { |
| b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON); |
| dev->irq_savedstate |= B43_IRQ_BEACON; |
| return; |
| } |
| |
| if (unlikely(wl->beacon_templates_virgin)) { |
| /* We never uploaded a beacon before. |
| * Upload both templates now, but only mark one valid. */ |
| wl->beacon_templates_virgin = 0; |
| b43_upload_beacon0(dev); |
| b43_upload_beacon1(dev); |
| cmd = b43_read32(dev, B43_MMIO_MACCMD); |
| cmd |= B43_MACCMD_BEACON0_VALID; |
| b43_write32(dev, B43_MMIO_MACCMD, cmd); |
| } else { |
| if (!beacon0_valid) { |
| b43_upload_beacon0(dev); |
| cmd = b43_read32(dev, B43_MMIO_MACCMD); |
| cmd |= B43_MACCMD_BEACON0_VALID; |
| b43_write32(dev, B43_MMIO_MACCMD, cmd); |
| } else if (!beacon1_valid) { |
| b43_upload_beacon1(dev); |
| cmd = b43_read32(dev, B43_MMIO_MACCMD); |
| cmd |= B43_MACCMD_BEACON1_VALID; |
| b43_write32(dev, B43_MMIO_MACCMD, cmd); |
| } |
| } |
| } |
| |
| static void b43_beacon_update_trigger_work(struct work_struct *work) |
| { |
| struct b43_wl *wl = container_of(work, struct b43_wl, |
| beacon_update_trigger); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| dev = wl->current_dev; |
| if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { |
| spin_lock_irq(&wl->irq_lock); |
| /* update beacon right away or defer to irq */ |
| dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| handle_irq_beacon(dev); |
| /* The handler might have updated the IRQ mask. */ |
| b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, |
| dev->irq_savedstate); |
| mmiowb(); |
| spin_unlock_irq(&wl->irq_lock); |
| } |
| mutex_unlock(&wl->mutex); |
| } |
| |
| /* Asynchronously update the packet templates in template RAM. |
| * Locking: Requires wl->irq_lock to be locked. */ |
| static void b43_update_templates(struct b43_wl *wl) |
| { |
| struct sk_buff *beacon; |
| |
| /* This is the top half of the ansynchronous beacon update. |
| * The bottom half is the beacon IRQ. |
| * Beacon update must be asynchronous to avoid sending an |
| * invalid beacon. This can happen for example, if the firmware |
| * transmits a beacon while we are updating it. */ |
| |
| /* We could modify the existing beacon and set the aid bit in |
| * the TIM field, but that would probably require resizing and |
| * moving of data within the beacon template. |
| * Simply request a new beacon and let mac80211 do the hard work. */ |
| beacon = ieee80211_beacon_get(wl->hw, wl->vif); |
| if (unlikely(!beacon)) |
| return; |
| |
| if (wl->current_beacon) |
| dev_kfree_skb_any(wl->current_beacon); |
| wl->current_beacon = beacon; |
| wl->beacon0_uploaded = 0; |
| wl->beacon1_uploaded = 0; |
| queue_work(wl->hw->workqueue, &wl->beacon_update_trigger); |
| } |
| |
| static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) |
| { |
| b43_time_lock(dev); |
| if (dev->dev->id.revision >= 3) { |
| b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16)); |
| b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10)); |
| } else { |
| b43_write16(dev, 0x606, (beacon_int >> 6)); |
| b43_write16(dev, 0x610, beacon_int); |
| } |
| b43_time_unlock(dev); |
| b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int); |
| } |
| |
| static void b43_handle_firmware_panic(struct b43_wldev *dev) |
| { |
| u16 reason; |
| |
| /* Read the register that contains the reason code for the panic. */ |
| reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG); |
| b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason); |
| |
| switch (reason) { |
| default: |
| b43dbg(dev->wl, "The panic reason is unknown.\n"); |
| /* fallthrough */ |
| case B43_FWPANIC_DIE: |
| /* Do not restart the controller or firmware. |
| * The device is nonfunctional from now on. |
| * Restarting would result in this panic to trigger again, |
| * so we avoid that recursion. */ |
| break; |
| case B43_FWPANIC_RESTART: |
| b43_controller_restart(dev, "Microcode panic"); |
| break; |
| } |
| } |
| |
| static void handle_irq_ucode_debug(struct b43_wldev *dev) |
| { |
| unsigned int i, cnt; |
| u16 reason, marker_id, marker_line; |
| __le16 *buf; |
| |
| /* The proprietary firmware doesn't have this IRQ. */ |
| if (!dev->fw.opensource) |
| return; |
| |
| /* Read the register that contains the reason code for this IRQ. */ |
| reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG); |
| |
| switch (reason) { |
| case B43_DEBUGIRQ_PANIC: |
| b43_handle_firmware_panic(dev); |
| break; |
| case B43_DEBUGIRQ_DUMP_SHM: |
| if (!B43_DEBUG) |
| break; /* Only with driver debugging enabled. */ |
| buf = kmalloc(4096, GFP_ATOMIC); |
| if (!buf) { |
| b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n"); |
| goto out; |
| } |
| for (i = 0; i < 4096; i += 2) { |
| u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i); |
| buf[i / 2] = cpu_to_le16(tmp); |
| } |
| b43info(dev->wl, "Shared memory dump:\n"); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, |
| 16, 2, buf, 4096, 1); |
| kfree(buf); |
| break; |
| case B43_DEBUGIRQ_DUMP_REGS: |
| if (!B43_DEBUG) |
| break; /* Only with driver debugging enabled. */ |
| b43info(dev->wl, "Microcode register dump:\n"); |
| for (i = 0, cnt = 0; i < 64; i++) { |
| u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i); |
| if (cnt == 0) |
| printk(KERN_INFO); |
| printk("r%02u: 0x%04X ", i, tmp); |
| cnt++; |
| if (cnt == 6) { |
| printk("\n"); |
| cnt = 0; |
| } |
| } |
| printk("\n"); |
| break; |
| case B43_DEBUGIRQ_MARKER: |
| if (!B43_DEBUG) |
| break; /* Only with driver debugging enabled. */ |
| marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH, |
| B43_MARKER_ID_REG); |
| marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH, |
| B43_MARKER_LINE_REG); |
| b43info(dev->wl, "The firmware just executed the MARKER(%u) " |
| "at line number %u\n", |
| marker_id, marker_line); |
| break; |
| default: |
| b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n", |
| reason); |
| } |
| out: |
| /* Acknowledge the debug-IRQ, so the firmware can continue. */ |
| b43_shm_write16(dev, B43_SHM_SCRATCH, |
| B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK); |
| } |
| |
| /* Interrupt handler bottom-half */ |
| static void b43_interrupt_tasklet(struct b43_wldev *dev) |
| { |
| u32 reason; |
| u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; |
| u32 merged_dma_reason = 0; |
| int i; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->wl->irq_lock, flags); |
| |
| B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED); |
| |
| reason = dev->irq_reason; |
| for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { |
| dma_reason[i] = dev->dma_reason[i]; |
| merged_dma_reason |= dma_reason[i]; |
| } |
| |
| if (unlikely(reason & B43_IRQ_MAC_TXERR)) |
| b43err(dev->wl, "MAC transmission error\n"); |
| |
| if (unlikely(reason & B43_IRQ_PHY_TXERR)) { |
| b43err(dev->wl, "PHY transmission error\n"); |
| rmb(); |
| if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) { |
| atomic_set(&dev->phy.txerr_cnt, |
| B43_PHY_TX_BADNESS_LIMIT); |
| b43err(dev->wl, "Too many PHY TX errors, " |
| "restarting the controller\n"); |
| b43_controller_restart(dev, "PHY TX errors"); |
| } |
| } |
| |
| if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | |
| B43_DMAIRQ_NONFATALMASK))) { |
| if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { |
| b43err(dev->wl, "Fatal DMA error: " |
| "0x%08X, 0x%08X, 0x%08X, " |
| "0x%08X, 0x%08X, 0x%08X\n", |
| dma_reason[0], dma_reason[1], |
| dma_reason[2], dma_reason[3], |
| dma_reason[4], dma_reason[5]); |
| b43_controller_restart(dev, "DMA error"); |
| mmiowb(); |
| spin_unlock_irqrestore(&dev->wl->irq_lock, flags); |
| return; |
| } |
| if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { |
| b43err(dev->wl, "DMA error: " |
| "0x%08X, 0x%08X, 0x%08X, " |
| "0x%08X, 0x%08X, 0x%08X\n", |
| dma_reason[0], dma_reason[1], |
| dma_reason[2], dma_reason[3], |
| dma_reason[4], dma_reason[5]); |
| } |
| } |
| |
| if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) |
| handle_irq_ucode_debug(dev); |
| if (reason & B43_IRQ_TBTT_INDI) |
| handle_irq_tbtt_indication(dev); |
| if (reason & B43_IRQ_ATIM_END) |
| handle_irq_atim_end(dev); |
| if (reason & B43_IRQ_BEACON) |
| handle_irq_beacon(dev); |
| if (reason & B43_IRQ_PMQ) |
| handle_irq_pmq(dev); |
| if (reason & B43_IRQ_TXFIFO_FLUSH_OK) |
| ;/* TODO */ |
| if (reason & B43_IRQ_NOISESAMPLE_OK) |
| handle_irq_noise(dev); |
| |
| /* Check the DMA reason registers for received data. */ |
| if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { |
| if (b43_using_pio_transfers(dev)) |
| b43_pio_rx(dev->pio.rx_queue); |
| else |
| b43_dma_rx(dev->dma.rx_ring); |
| } |
| B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE); |
| B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE); |
| B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE); |
| B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE); |
| B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE); |
| |
| if (reason & B43_IRQ_TX_OK) |
| handle_irq_transmit_status(dev); |
| |
| b43_interrupt_enable(dev, dev->irq_savedstate); |
| mmiowb(); |
| spin_unlock_irqrestore(&dev->wl->irq_lock, flags); |
| } |
| |
| static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason) |
| { |
| b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); |
| |
| b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); |
| b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); |
| b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); |
| b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); |
| b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); |
| b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); |
| } |
| |
| /* Interrupt handler top-half */ |
| static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| struct b43_wldev *dev = dev_id; |
| u32 reason; |
| |
| if (!dev) |
| return IRQ_NONE; |
| |
| spin_lock(&dev->wl->irq_lock); |
| |
| if (b43_status(dev) < B43_STAT_STARTED) |
| goto out; |
| reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| if (reason == 0xffffffff) /* shared IRQ */ |
| goto out; |
| ret = IRQ_HANDLED; |
| reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| if (!reason) |
| goto out; |
| |
| dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) |
| & 0x0001DC00; |
| dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) |
| & 0x0000DC00; |
| dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) |
| & 0x0000DC00; |
| dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON) |
| & 0x0001DC00; |
| dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON) |
| & 0x0000DC00; |
| dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON) |
| & 0x0000DC00; |
| |
| b43_interrupt_ack(dev, reason); |
| /* disable all IRQs. They are enabled again in the bottom half. */ |
| dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| /* save the reason code and call our bottom half. */ |
| dev->irq_reason = reason; |
| tasklet_schedule(&dev->isr_tasklet); |
| out: |
| mmiowb(); |
| spin_unlock(&dev->wl->irq_lock); |
| |
| return ret; |
| } |
| |
| void b43_do_release_fw(struct b43_firmware_file *fw) |
| { |
| release_firmware(fw->data); |
| fw->data = NULL; |
| fw->filename = NULL; |
| } |
| |
| static void b43_release_firmware(struct b43_wldev *dev) |
| { |
| b43_do_release_fw(&dev->fw.ucode); |
| b43_do_release_fw(&dev->fw.pcm); |
| b43_do_release_fw(&dev->fw.initvals); |
| b43_do_release_fw(&dev->fw.initvals_band); |
| } |
| |
| static void b43_print_fw_helptext(struct b43_wl *wl, bool error) |
| { |
| const char text[] = |
| "You must go to " \ |
| "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \ |
| "and download the correct firmware for this driver version. " \ |
| "Please carefully read all instructions on this website.\n"; |
| |
| if (error) |
| b43err(wl, text); |
| else |
| b43warn(wl, text); |
| } |
| |
| int b43_do_request_fw(struct b43_request_fw_context *ctx, |
| const char *name, |
| struct b43_firmware_file *fw) |
| { |
| const struct firmware *blob; |
| struct b43_fw_header *hdr; |
| u32 size; |
| int err; |
| |
| if (!name) { |
| /* Don't fetch anything. Free possibly cached firmware. */ |
| /* FIXME: We should probably keep it anyway, to save some headache |
| * on suspend/resume with multiband devices. */ |
| b43_do_release_fw(fw); |
| return 0; |
| } |
| if (fw->filename) { |
| if ((fw->type == ctx->req_type) && |
| (strcmp(fw->filename, name) == 0)) |
| return 0; /* Already have this fw. */ |
| /* Free the cached firmware first. */ |
| /* FIXME: We should probably do this later after we successfully |
| * got the new fw. This could reduce headache with multiband devices. |
| * We could also redesign this to cache the firmware for all possible |
| * bands all the time. */ |
| b43_do_release_fw(fw); |
| } |
| |
| switch (ctx->req_type) { |
| case B43_FWTYPE_PROPRIETARY: |
| snprintf(ctx->fwname, sizeof(ctx->fwname), |
| "b43%s/%s.fw", |
| modparam_fwpostfix, name); |
| break; |
| case B43_FWTYPE_OPENSOURCE: |
| snprintf(ctx->fwname, sizeof(ctx->fwname), |
| "b43-open%s/%s.fw", |
| modparam_fwpostfix, name); |
| break; |
| default: |
| B43_WARN_ON(1); |
| return -ENOSYS; |
| } |
| err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev); |
| if (err == -ENOENT) { |
| snprintf(ctx->errors[ctx->req_type], |
| sizeof(ctx->errors[ctx->req_type]), |
| "Firmware file \"%s\" not found\n", ctx->fwname); |
| return err; |
| } else if (err) { |
| snprintf(ctx->errors[ctx->req_type], |
| sizeof(ctx->errors[ctx->req_type]), |
| "Firmware file \"%s\" request failed (err=%d)\n", |
| ctx->fwname, err); |
| return err; |
| } |
| if (blob->size < sizeof(struct b43_fw_header)) |
| goto err_format; |
| hdr = (struct b43_fw_header *)(blob->data); |
| switch (hdr->type) { |
| case B43_FW_TYPE_UCODE: |
| case B43_FW_TYPE_PCM: |
| size = be32_to_cpu(hdr->size); |
| if (size != blob->size - sizeof(struct b43_fw_header)) |
| goto err_format; |
| /* fallthrough */ |
| case B43_FW_TYPE_IV: |
| if (hdr->ver != 1) |
| goto err_format; |
| break; |
| default: |
| goto err_format; |
| } |
| |
| fw->data = blob; |
| fw->filename = name; |
| fw->type = ctx->req_type; |
| |
| return 0; |
| |
| err_format: |
| snprintf(ctx->errors[ctx->req_type], |
| sizeof(ctx->errors[ctx->req_type]), |
| "Firmware file \"%s\" format error.\n", ctx->fwname); |
| release_firmware(blob); |
| |
| return -EPROTO; |
| } |
| |
| static int b43_try_request_fw(struct b43_request_fw_context *ctx) |
| { |
| struct b43_wldev *dev = ctx->dev; |
| struct b43_firmware *fw = &ctx->dev->fw; |
| const u8 rev = ctx->dev->dev->id.revision; |
| const char *filename; |
| u32 tmshigh; |
| int err; |
| |
| /* Get microcode */ |
| tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); |
| if ((rev >= 5) && (rev <= 10)) |
| filename = "ucode5"; |
| else if ((rev >= 11) && (rev <= 12)) |
| filename = "ucode11"; |
| else if (rev >= 13) |
| filename = "ucode13"; |
| else |
| goto err_no_ucode; |
| err = b43_do_request_fw(ctx, filename, &fw->ucode); |
| if (err) |
| goto err_load; |
| |
| /* Get PCM code */ |
| if ((rev >= 5) && (rev <= 10)) |
| filename = "pcm5"; |
| else if (rev >= 11) |
| filename = NULL; |
| else |
| goto err_no_pcm; |
| fw->pcm_request_failed = 0; |
| err = b43_do_request_fw(ctx, filename, &fw->pcm); |
| if (err == -ENOENT) { |
| /* We did not find a PCM file? Not fatal, but |
| * core rev <= 10 must do without hwcrypto then. */ |
| fw->pcm_request_failed = 1; |
| } else if (err) |
| goto err_load; |
| |
| /* Get initvals */ |
| switch (dev->phy.type) { |
| case B43_PHYTYPE_A: |
| if ((rev >= 5) && (rev <= 10)) { |
| if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) |
| filename = "a0g1initvals5"; |
| else |
| filename = "a0g0initvals5"; |
| } else |
| goto err_no_initvals; |
| break; |
| case B43_PHYTYPE_G: |
| if ((rev >= 5) && (rev <= 10)) |
| filename = "b0g0initvals5"; |
| else if (rev >= 13) |
| filename = "b0g0initvals13"; |
| else |
| goto err_no_initvals; |
| break; |
| case B43_PHYTYPE_N: |
| if ((rev >= 11) && (rev <= 12)) |
| filename = "n0initvals11"; |
| else |
| goto err_no_initvals; |
| break; |
| default: |
| goto err_no_initvals; |
| } |
| err = b43_do_request_fw(ctx, filename, &fw->initvals); |
| if (err) |
| goto err_load; |
| |
| /* Get bandswitch initvals */ |
| switch (dev->phy.type) { |
| case B43_PHYTYPE_A: |
| if ((rev >= 5) && (rev <= 10)) { |
| if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) |
| filename = "a0g1bsinitvals5"; |
| else |
| filename = "a0g0bsinitvals5"; |
| } else if (rev >= 11) |
| filename = NULL; |
| else |
| goto err_no_initvals; |
| break; |
| case B43_PHYTYPE_G: |
| if ((rev >= 5) && (rev <= 10)) |
| filename = "b0g0bsinitvals5"; |
| else if (rev >= 11) |
| filename = NULL; |
| else |
| goto err_no_initvals; |
| break; |
| case B43_PHYTYPE_N: |
| if ((rev >= 11) && (rev <= 12)) |
| filename = "n0bsinitvals11"; |
| else |
| goto err_no_initvals; |
| break; |
| default: |
| goto err_no_initvals; |
| } |
| err = b43_do_request_fw(ctx, filename, &fw->initvals_band); |
| if (err) |
| goto err_load; |
| |
| return 0; |
| |
| err_no_ucode: |
| err = ctx->fatal_failure = -EOPNOTSUPP; |
| b43err(dev->wl, "The driver does not know which firmware (ucode) " |
| "is required for your device (wl-core rev %u)\n", rev); |
| goto error; |
| |
| err_no_pcm: |
| err = ctx->fatal_failure = -EOPNOTSUPP; |
| b43err(dev->wl, "The driver does not know which firmware (PCM) " |
| "is required for your device (wl-core rev %u)\n", rev); |
| goto error; |
| |
| err_no_initvals: |
| err = ctx->fatal_failure = -EOPNOTSUPP; |
| b43err(dev->wl, "The driver does not know which firmware (initvals) " |
| "is required for your device (wl-core rev %u)\n", rev); |
| goto error; |
| |
| err_load: |
| /* We failed to load this firmware image. The error message |
| * already is in ctx->errors. Return and let our caller decide |
| * what to do. */ |
| goto error; |
| |
| error: |
| b43_release_firmware(dev); |
| return err; |
| } |
| |
| static int b43_request_firmware(struct b43_wldev *dev) |
| { |
| struct b43_request_fw_context *ctx; |
| unsigned int i; |
| int err; |
| const char *errmsg; |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| ctx->dev = dev; |
| |
| ctx->req_type = B43_FWTYPE_PROPRIETARY; |
| err = b43_try_request_fw(ctx); |
| if (!err) |
| goto out; /* Successfully loaded it. */ |
| err = ctx->fatal_failure; |
| if (err) |
| goto out; |
| |
| ctx->req_type = B43_FWTYPE_OPENSOURCE; |
| err = b43_try_request_fw(ctx); |
| if (!err) |
| goto out; /* Successfully loaded it. */ |
| err = ctx->fatal_failure; |
| if (err) |
| goto out; |
| |
| /* Could not find a usable firmware. Print the errors. */ |
| for (i = 0; i < B43_NR_FWTYPES; i++) { |
| errmsg = ctx->errors[i]; |
| if (strlen(errmsg)) |
| b43err(dev->wl, errmsg); |
| } |
| b43_print_fw_helptext(dev->wl, 1); |
| err = -ENOENT; |
| |
| out: |
| kfree(ctx); |
| return err; |
| } |
| |
| static int b43_upload_microcode(struct b43_wldev *dev) |
| { |
| const size_t hdr_len = sizeof(struct b43_fw_header); |
| const __be32 *data; |
| unsigned int i, len; |
| u16 fwrev, fwpatch, fwdate, fwtime; |
| u32 tmp, macctl; |
| int err = 0; |
| |
| /* Jump the microcode PSM to offset 0 */ |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN); |
| macctl |= B43_MACCTL_PSM_JMP0; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| /* Zero out all microcode PSM registers and shared memory. */ |
| for (i = 0; i < 64; i++) |
| b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0); |
| for (i = 0; i < 4096; i += 2) |
| b43_shm_write16(dev, B43_SHM_SHARED, i, 0); |
| |
| /* Upload Microcode. */ |
| data = (__be32 *) (dev->fw.ucode.data->data + hdr_len); |
| len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32); |
| b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000); |
| for (i = 0; i < len; i++) { |
| b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); |
| udelay(10); |
| } |
| |
| if (dev->fw.pcm.data) { |
| /* Upload PCM data. */ |
| data = (__be32 *) (dev->fw.pcm.data->data + hdr_len); |
| len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32); |
| b43_shm_control_word(dev, B43_SHM_HW, 0x01EA); |
| b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000); |
| /* No need for autoinc bit in SHM_HW */ |
| b43_shm_control_word(dev, B43_SHM_HW, 0x01EB); |
| for (i = 0; i < len; i++) { |
| b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); |
| udelay(10); |
| } |
| } |
| |
| b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); |
| |
| /* Start the microcode PSM */ |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl &= ~B43_MACCTL_PSM_JMP0; |
| macctl |= B43_MACCTL_PSM_RUN; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| |
| /* Wait for the microcode to load and respond */ |
| i = 0; |
| while (1) { |
| tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| if (tmp == B43_IRQ_MAC_SUSPENDED) |
| break; |
| i++; |
| if (i >= 20) { |
| b43err(dev->wl, "Microcode not responding\n"); |
| b43_print_fw_helptext(dev->wl, 1); |
| err = -ENODEV; |
| goto error; |
| } |
| msleep_interruptible(50); |
| if (signal_pending(current)) { |
| err = -EINTR; |
| goto error; |
| } |
| } |
| b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| |
| /* Get and check the revisions. */ |
| fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV); |
| fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH); |
| fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE); |
| fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME); |
| |
| if (fwrev <= 0x128) { |
| b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from " |
| "binary drivers older than version 4.x is unsupported. " |
| "You must upgrade your firmware files.\n"); |
| b43_print_fw_helptext(dev->wl, 1); |
| err = -EOPNOTSUPP; |
| goto error; |
| } |
| dev->fw.rev = fwrev; |
| dev->fw.patch = fwpatch; |
| dev->fw.opensource = (fwdate == 0xFFFF); |
| |
| if (dev->fw.opensource) { |
| /* Patchlevel info is encoded in the "time" field. */ |
| dev->fw.patch = fwtime; |
| b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", |
| dev->fw.rev, dev->fw.patch, |
| dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); |
| } else { |
| b43info(dev->wl, "Loading firmware version %u.%u " |
| "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", |
| fwrev, fwpatch, |
| (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF, |
| (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F); |
| if (dev->fw.pcm_request_failed) { |
| b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. " |
| "Hardware accelerated cryptography is disabled.\n"); |
| b43_print_fw_helptext(dev->wl, 0); |
| } |
| } |
| |
| if (b43_is_old_txhdr_format(dev)) { |
| /* We're over the deadline, but we keep support for old fw |
| * until it turns out to be in major conflict with something new. */ |
| b43warn(dev->wl, "You are using an old firmware image. " |
| "Support for old firmware will be removed soon " |
| "(official deadline was July 2008).\n"); |
| b43_print_fw_helptext(dev->wl, 0); |
| } |
| |
| return 0; |
| |
| error: |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl &= ~B43_MACCTL_PSM_RUN; |
| macctl |= B43_MACCTL_PSM_JMP0; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| |
| return err; |
| } |
| |
| static int b43_write_initvals(struct b43_wldev *dev, |
| const struct b43_iv *ivals, |
| size_t count, |
| size_t array_size) |
| { |
| const struct b43_iv *iv; |
| u16 offset; |
| size_t i; |
| bool bit32; |
| |
| BUILD_BUG_ON(sizeof(struct b43_iv) != 6); |
| iv = ivals; |
| for (i = 0; i < count; i++) { |
| if (array_size < sizeof(iv->offset_size)) |
| goto err_format; |
| array_size -= sizeof(iv->offset_size); |
| offset = be16_to_cpu(iv->offset_size); |
| bit32 = !!(offset & B43_IV_32BIT); |
| offset &= B43_IV_OFFSET_MASK; |
| if (offset >= 0x1000) |
| goto err_format; |
| if (bit32) { |
| u32 value; |
| |
| if (array_size < sizeof(iv->data.d32)) |
| goto err_format; |
| array_size -= sizeof(iv->data.d32); |
| |
| value = get_unaligned_be32(&iv->data.d32); |
| b43_write32(dev, offset, value); |
| |
| iv = (const struct b43_iv *)((const uint8_t *)iv + |
| sizeof(__be16) + |
| sizeof(__be32)); |
| } else { |
| u16 value; |
| |
| if (array_size < sizeof(iv->data.d16)) |
| goto err_format; |
| array_size -= sizeof(iv->data.d16); |
| |
| value = be16_to_cpu(iv->data.d16); |
| b43_write16(dev, offset, value); |
| |
| iv = (const struct b43_iv *)((const uint8_t *)iv + |
| sizeof(__be16) + |
| sizeof(__be16)); |
| } |
| } |
| if (array_size) |
| goto err_format; |
| |
| return 0; |
| |
| err_format: |
| b43err(dev->wl, "Initial Values Firmware file-format error.\n"); |
| b43_print_fw_helptext(dev->wl, 1); |
| |
| return -EPROTO; |
| } |
| |
| static int b43_upload_initvals(struct b43_wldev *dev) |
| { |
| const size_t hdr_len = sizeof(struct b43_fw_header); |
| const struct b43_fw_header *hdr; |
| struct b43_firmware *fw = &dev->fw; |
| const struct b43_iv *ivals; |
| size_t count; |
| int err; |
| |
| hdr = (const struct b43_fw_header *)(fw->initvals.data->data); |
| ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len); |
| count = be32_to_cpu(hdr->size); |
| err = b43_write_initvals(dev, ivals, count, |
| fw->initvals.data->size - hdr_len); |
| if (err) |
| goto out; |
| if (fw->initvals_band.data) { |
| hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data); |
| ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len); |
| count = be32_to_cpu(hdr->size); |
| err = b43_write_initvals(dev, ivals, count, |
| fw->initvals_band.data->size - hdr_len); |
| if (err) |
| goto out; |
| } |
| out: |
| |
| return err; |
| } |
| |
| /* Initialize the GPIOs |
| * http://bcm-specs.sipsolutions.net/GPIO |
| */ |
| static int b43_gpio_init(struct b43_wldev *dev) |
| { |
| struct ssb_bus *bus = dev->dev->bus; |
| struct ssb_device *gpiodev, *pcidev = NULL; |
| u32 mask, set; |
| |
| b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| & ~B43_MACCTL_GPOUTSMSK); |
| |
| b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) |
| | 0x000F); |
| |
| mask = 0x0000001F; |
| set = 0x0000000F; |
| if (dev->dev->bus->chip_id == 0x4301) { |
| mask |= 0x0060; |
| set |= 0x0060; |
| } |
| if (0 /* FIXME: conditional unknown */ ) { |
| b43_write16(dev, B43_MMIO_GPIO_MASK, |
| b43_read16(dev, B43_MMIO_GPIO_MASK) |
| | 0x0100); |
| mask |= 0x0180; |
| set |= 0x0180; |
| } |
| if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { |
| b43_write16(dev, B43_MMIO_GPIO_MASK, |
| b43_read16(dev, B43_MMIO_GPIO_MASK) |
| | 0x0200); |
| mask |= 0x0200; |
| set |= 0x0200; |
| } |
| if (dev->dev->id.revision >= 2) |
| mask |= 0x0010; /* FIXME: This is redundant. */ |
| |
| #ifdef CONFIG_SSB_DRIVER_PCICORE |
| pcidev = bus->pcicore.dev; |
| #endif |
| gpiodev = bus->chipco.dev ? : pcidev; |
| if (!gpiodev) |
| return 0; |
| ssb_write32(gpiodev, B43_GPIO_CONTROL, |
| (ssb_read32(gpiodev, B43_GPIO_CONTROL) |
| & mask) | set); |
| |
| return 0; |
| } |
| |
| /* Turn off all GPIO stuff. Call this on module unload, for example. */ |
| static void b43_gpio_cleanup(struct b43_wldev *dev) |
| { |
| struct ssb_bus *bus = dev->dev->bus; |
| struct ssb_device *gpiodev, *pcidev = NULL; |
| |
| #ifdef CONFIG_SSB_DRIVER_PCICORE |
| pcidev = bus->pcicore.dev; |
| #endif |
| gpiodev = bus->chipco.dev ? : pcidev; |
| if (!gpiodev) |
| return; |
| ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/EnableMac */ |
| void b43_mac_enable(struct b43_wldev *dev) |
| { |
| if (b43_debug(dev, B43_DBG_FIRMWARE)) { |
| u16 fwstate; |
| |
| fwstate = b43_shm_read16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_UCODESTAT); |
| if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) && |
| (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) { |
| b43err(dev->wl, "b43_mac_enable(): The firmware " |
| "should be suspended, but current state is %u\n", |
| fwstate); |
| } |
| } |
| |
| dev->mac_suspended--; |
| B43_WARN_ON(dev->mac_suspended < 0); |
| if (dev->mac_suspended == 0) { |
| b43_write32(dev, B43_MMIO_MACCTL, |
| b43_read32(dev, B43_MMIO_MACCTL) |
| | B43_MACCTL_ENABLED); |
| b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, |
| B43_IRQ_MAC_SUSPENDED); |
| /* Commit writes */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| b43_power_saving_ctl_bits(dev, 0); |
| } |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/SuspendMAC */ |
| void b43_mac_suspend(struct b43_wldev *dev) |
| { |
| int i; |
| u32 tmp; |
| |
| might_sleep(); |
| B43_WARN_ON(dev->mac_suspended < 0); |
| |
| if (dev->mac_suspended == 0) { |
| b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); |
| b43_write32(dev, B43_MMIO_MACCTL, |
| b43_read32(dev, B43_MMIO_MACCTL) |
| & ~B43_MACCTL_ENABLED); |
| /* force pci to flush the write */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| for (i = 35; i; i--) { |
| tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| if (tmp & B43_IRQ_MAC_SUSPENDED) |
| goto out; |
| udelay(10); |
| } |
| /* Hm, it seems this will take some time. Use msleep(). */ |
| for (i = 40; i; i--) { |
| tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| if (tmp & B43_IRQ_MAC_SUSPENDED) |
| goto out; |
| msleep(1); |
| } |
| b43err(dev->wl, "MAC suspend failed\n"); |
| } |
| out: |
| dev->mac_suspended++; |
| } |
| |
| static void b43_adjust_opmode(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| u32 ctl; |
| u16 cfp_pretbtt; |
| |
| ctl = b43_read32(dev, B43_MMIO_MACCTL); |
| /* Reset status to STA infrastructure mode. */ |
| ctl &= ~B43_MACCTL_AP; |
| ctl &= ~B43_MACCTL_KEEP_CTL; |
| ctl &= ~B43_MACCTL_KEEP_BADPLCP; |
| ctl &= ~B43_MACCTL_KEEP_BAD; |
| ctl &= ~B43_MACCTL_PROMISC; |
| ctl &= ~B43_MACCTL_BEACPROMISC; |
| ctl |= B43_MACCTL_INFRA; |
| |
| if (b43_is_mode(wl, NL80211_IFTYPE_AP) || |
| b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) |
| ctl |= B43_MACCTL_AP; |
| else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) |
| ctl &= ~B43_MACCTL_INFRA; |
| |
| if (wl->filter_flags & FIF_CONTROL) |
| ctl |= B43_MACCTL_KEEP_CTL; |
| if (wl->filter_flags & FIF_FCSFAIL) |
| ctl |= B43_MACCTL_KEEP_BAD; |
| if (wl->filter_flags & FIF_PLCPFAIL) |
| ctl |= B43_MACCTL_KEEP_BADPLCP; |
| if (wl->filter_flags & FIF_PROMISC_IN_BSS) |
| ctl |= B43_MACCTL_PROMISC; |
| if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC) |
| ctl |= B43_MACCTL_BEACPROMISC; |
| |
| /* Workaround: On old hardware the HW-MAC-address-filter |
| * doesn't work properly, so always run promisc in filter |
| * it in software. */ |
| if (dev->dev->id.revision <= 4) |
| ctl |= B43_MACCTL_PROMISC; |
| |
| b43_write32(dev, B43_MMIO_MACCTL, ctl); |
| |
| cfp_pretbtt = 2; |
| if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { |
| if (dev->dev->bus->chip_id == 0x4306 && |
| dev->dev->bus->chip_rev == 3) |
| cfp_pretbtt = 100; |
| else |
| cfp_pretbtt = 50; |
| } |
| b43_write16(dev, 0x612, cfp_pretbtt); |
| } |
| |
| static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) |
| { |
| u16 offset; |
| |
| if (is_ofdm) { |
| offset = 0x480; |
| offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; |
| } else { |
| offset = 0x4C0; |
| offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2; |
| } |
| b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20, |
| b43_shm_read16(dev, B43_SHM_SHARED, offset)); |
| } |
| |
| static void b43_rate_memory_init(struct b43_wldev *dev) |
| { |
| switch (dev->phy.type) { |
| case B43_PHYTYPE_A: |
| case B43_PHYTYPE_G: |
| case B43_PHYTYPE_N: |
| b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1); |
| b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1); |
| if (dev->phy.type == B43_PHYTYPE_A) |
| break; |
| /* fallthrough */ |
| case B43_PHYTYPE_B: |
| b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0); |
| b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0); |
| b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0); |
| b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0); |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| } |
| |
| /* Set the default values for the PHY TX Control Words. */ |
| static void b43_set_phytxctl_defaults(struct b43_wldev *dev) |
| { |
| u16 ctl = 0; |
| |
| ctl |= B43_TXH_PHY_ENC_CCK; |
| ctl |= B43_TXH_PHY_ANT01AUTO; |
| ctl |= B43_TXH_PHY_TXPWR; |
| |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl); |
| } |
| |
| /* Set the TX-Antenna for management frames sent by firmware. */ |
| static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) |
| { |
| u16 ant; |
| u16 tmp; |
| |
| ant = b43_antenna_to_phyctl(antenna); |
| |
| /* For ACK/CTS */ |
| tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL); |
| tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp); |
| /* For Probe Resposes */ |
| tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL); |
| tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp); |
| } |
| |
| /* This is the opposite of b43_chip_init() */ |
| static void b43_chip_exit(struct b43_wldev *dev) |
| { |
| b43_phy_exit(dev); |
| b43_gpio_cleanup(dev); |
| /* firmware is released later */ |
| } |
| |
| /* Initialize the chip |
| * http://bcm-specs.sipsolutions.net/ChipInit |
| */ |
| static int b43_chip_init(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| int err; |
| u32 value32, macctl; |
| u16 value16; |
| |
| /* Initialize the MAC control */ |
| macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED; |
| if (dev->phy.gmode) |
| macctl |= B43_MACCTL_GMODE; |
| macctl |= B43_MACCTL_INFRA; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| |
| err = b43_request_firmware(dev); |
| if (err) |
| goto out; |
| err = b43_upload_microcode(dev); |
| if (err) |
| goto out; /* firmware is released later */ |
| |
| err = b43_gpio_init(dev); |
| if (err) |
| goto out; /* firmware is released later */ |
| |
| err = b43_upload_initvals(dev); |
| if (err) |
| goto err_gpio_clean; |
| |
| /* Turn the Analog on and initialize the PHY. */ |
| phy->ops->switch_analog(dev, 1); |
| err = b43_phy_init(dev); |
| if (err) |
| goto err_gpio_clean; |
| |
| /* Disable Interference Mitigation. */ |
| if (phy->ops->interf_mitigation) |
| phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); |
| |
| /* Select the antennae */ |
| if (phy->ops->set_rx_antenna) |
| phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); |
| b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); |
| |
| if (phy->type == B43_PHYTYPE_B) { |
| value16 = b43_read16(dev, 0x005E); |
| value16 |= 0x0004; |
| b43_write16(dev, 0x005E, value16); |
| } |
| b43_write32(dev, 0x0100, 0x01000000); |
| if (dev->dev->id.revision < 5) |
| b43_write32(dev, 0x010C, 0x01000000); |
| |
| b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| & ~B43_MACCTL_INFRA); |
| b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| | B43_MACCTL_INFRA); |
| |
| /* Probe Response Timeout value */ |
| /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000); |
| |
| /* Initially set the wireless operation mode. */ |
| b43_adjust_opmode(dev); |
| |
| if (dev->dev->id.revision < 3) { |
| b43_write16(dev, 0x060E, 0x0000); |
| b43_write16(dev, 0x0610, 0x8000); |
| b43_write16(dev, 0x0604, 0x0000); |
| b43_write16(dev, 0x0606, 0x0200); |
| } else { |
| b43_write32(dev, 0x0188, 0x80000000); |
| b43_write32(dev, 0x018C, 0x02000000); |
| } |
| b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); |
| b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); |
| b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); |
| b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); |
| b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); |
| b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00); |
| b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00); |
| |
| value32 = ssb_read32(dev->dev, SSB_TMSLOW); |
| value32 |= 0x00100000; |
| ssb_write32(dev->dev, SSB_TMSLOW, value32); |
| |
| b43_write16(dev, B43_MMIO_POWERUP_DELAY, |
| dev->dev->bus->chipco.fast_pwrup_delay); |
| |
| err = 0; |
| b43dbg(dev->wl, "Chip initialized\n"); |
| out: |
| return err; |
| |
| err_gpio_clean: |
| b43_gpio_cleanup(dev); |
| return err; |
| } |
| |
| static void b43_periodic_every60sec(struct b43_wldev *dev) |
| { |
| const struct b43_phy_operations *ops = dev->phy.ops; |
| |
| if (ops->pwork_60sec) |
| ops->pwork_60sec(dev); |
| |
| /* Force check the TX power emission now. */ |
| b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); |
| } |
| |
| static void b43_periodic_every30sec(struct b43_wldev *dev) |
| { |
| /* Update device statistics. */ |
| b43_calculate_link_quality(dev); |
| } |
| |
| static void b43_periodic_every15sec(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u16 wdr; |
| |
| if (dev->fw.opensource) { |
| /* Check if the firmware is still alive. |
| * It will reset the watchdog counter to 0 in its idle loop. */ |
| wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG); |
| if (unlikely(wdr)) { |
| b43err(dev->wl, "Firmware watchdog: The firmware died!\n"); |
| b43_controller_restart(dev, "Firmware watchdog"); |
| return; |
| } else { |
| b43_shm_write16(dev, B43_SHM_SCRATCH, |
| B43_WATCHDOG_REG, 1); |
| } |
| } |
| |
| if (phy->ops->pwork_15sec) |
| phy->ops->pwork_15sec(dev); |
| |
| atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); |
| wmb(); |
| } |
| |
| static void do_periodic_work(struct b43_wldev *dev) |
| { |
| unsigned int state; |
| |
| state = dev->periodic_state; |
| if (state % 4 == 0) |
| b43_periodic_every60sec(dev); |
| if (state % 2 == 0) |
| b43_periodic_every30sec(dev); |
| b43_periodic_every15sec(dev); |
| } |
| |
| /* Periodic work locking policy: |
| * The whole periodic work handler is protected by |
| * wl->mutex. If another lock is needed somewhere in the |
| * pwork callchain, it's aquired in-place, where it's needed. |
| */ |
| static void b43_periodic_work_handler(struct work_struct *work) |
| { |
| struct b43_wldev *dev = container_of(work, struct b43_wldev, |
| periodic_work.work); |
| struct b43_wl *wl = dev->wl; |
| unsigned long delay; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(b43_status(dev) != B43_STAT_STARTED)) |
| goto out; |
| if (b43_debug(dev, B43_DBG_PWORK_STOP)) |
| goto out_requeue; |
| |
| do_periodic_work(dev); |
| |
| dev->periodic_state++; |
| out_requeue: |
| if (b43_debug(dev, B43_DBG_PWORK_FAST)) |
| delay = msecs_to_jiffies(50); |
| else |
| delay = round_jiffies_relative(HZ * 15); |
| queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void b43_periodic_tasks_setup(struct b43_wldev *dev) |
| { |
| struct delayed_work *work = &dev->periodic_work; |
| |
| dev->periodic_state = 0; |
| INIT_DELAYED_WORK(work, b43_periodic_work_handler); |
| queue_delayed_work(dev->wl->hw->workqueue, work, 0); |
| } |
| |
| /* Check if communication with the device works correctly. */ |
| static int b43_validate_chipaccess(struct b43_wldev *dev) |
| { |
| u32 v, backup; |
| |
| backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); |
| |
| /* Check for read/write and endianness problems. */ |
| b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); |
| if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55) |
| goto error; |
| b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); |
| if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) |
| goto error; |
| |
| b43_shm_write32(dev, B43_SHM_SHARED, 0, backup); |
| |
| if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) { |
| /* The 32bit register shadows the two 16bit registers |
| * with update sideeffects. Validate this. */ |
| b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); |
| b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB); |
| if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB) |
| goto error; |
| if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC) |
| goto error; |
| } |
| b43_write32(dev, B43_MMIO_TSF_CFP_START, 0); |
| |
| v = b43_read32(dev, B43_MMIO_MACCTL); |
| v |= B43_MACCTL_GMODE; |
| if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) |
| goto error; |
| |
| return 0; |
| error: |
| b43err(dev->wl, "Failed to validate the chipaccess\n"); |
| return -ENODEV; |
| } |
| |
| static void b43_security_init(struct b43_wldev *dev) |
| { |
| dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; |
| B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); |
| dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP); |
| /* KTP is a word address, but we address SHM bytewise. |
| * So multiply by two. |
| */ |
| dev->ktp *= 2; |
| if (dev->dev->id.revision >= 5) { |
| /* Number of RCMTA address slots */ |
| b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8); |
| } |
| b43_clear_keys(dev); |
| } |
| |
| static int b43_rng_read(struct hwrng *rng, u32 *data) |
| { |
| struct b43_wl *wl = (struct b43_wl *)rng->priv; |
| unsigned long flags; |
| |
| /* Don't take wl->mutex here, as it could deadlock with |
| * hwrng internal locking. It's not needed to take |
| * wl->mutex here, anyway. */ |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| *data = b43_read16(wl->current_dev, B43_MMIO_RNG); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| |
| return (sizeof(u16)); |
| } |
| |
| static void b43_rng_exit(struct b43_wl *wl) |
| { |
| if (wl->rng_initialized) |
| hwrng_unregister(&wl->rng); |
| } |
| |
| static int b43_rng_init(struct b43_wl *wl) |
| { |
| int err; |
| |
| snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), |
| "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); |
| wl->rng.name = wl->rng_name; |
| wl->rng.data_read = b43_rng_read; |
| wl->rng.priv = (unsigned long)wl; |
| wl->rng_initialized = 1; |
| err = hwrng_register(&wl->rng); |
| if (err) { |
| wl->rng_initialized = 0; |
| b43err(wl, "Failed to register the random " |
| "number generator (%d)\n", err); |
| } |
| |
| return err; |
| } |
| |
| static int b43_op_tx(struct ieee80211_hw *hw, |
| struct sk_buff *skb) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| unsigned long flags; |
| int err; |
| |
| if (unlikely(skb->len < 2 + 2 + 6)) { |
| /* Too short, this can't be a valid frame. */ |
| goto drop_packet; |
| } |
| B43_WARN_ON(skb_shinfo(skb)->nr_frags); |
| if (unlikely(!dev)) |
| goto drop_packet; |
| |
| /* Transmissions on seperate queues can run concurrently. */ |
| read_lock_irqsave(&wl->tx_lock, flags); |
| |
| err = -ENODEV; |
| if (likely(b43_status(dev) >= B43_STAT_STARTED)) { |
| if (b43_using_pio_transfers(dev)) |
| err = b43_pio_tx(dev, skb); |
| else |
| err = b43_dma_tx(dev, skb); |
| } |
| |
| read_unlock_irqrestore(&wl->tx_lock, flags); |
| |
| if (unlikely(err)) |
| goto drop_packet; |
| return NETDEV_TX_OK; |
| |
| drop_packet: |
| /* We can not transmit this packet. Drop it. */ |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* Locking: wl->irq_lock */ |
| static void b43_qos_params_upload(struct b43_wldev *dev, |
| const struct ieee80211_tx_queue_params *p, |
| u16 shm_offset) |
| { |
| u16 params[B43_NR_QOSPARAMS]; |
| int bslots, tmp; |
| unsigned int i; |
| |
| bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min; |
| |
| memset(¶ms, 0, sizeof(params)); |
| |
| params[B43_QOSPARAM_TXOP] = p->txop * 32; |
| params[B43_QOSPARAM_CWMIN] = p->cw_min; |
| params[B43_QOSPARAM_CWMAX] = p->cw_max; |
| params[B43_QOSPARAM_CWCUR] = p->cw_min; |
| params[B43_QOSPARAM_AIFS] = p->aifs; |
| params[B43_QOSPARAM_BSLOTS] = bslots; |
| params[B43_QOSPARAM_REGGAP] = bslots + p->aifs; |
| |
| for (i = 0; i < ARRAY_SIZE(params); i++) { |
| if (i == B43_QOSPARAM_STATUS) { |
| tmp = b43_shm_read16(dev, B43_SHM_SHARED, |
| shm_offset + (i * 2)); |
| /* Mark the parameters as updated. */ |
| tmp |= 0x100; |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| shm_offset + (i * 2), |
| tmp); |
| } else { |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| shm_offset + (i * 2), |
| params[i]); |
| } |
| } |
| } |
| |
| /* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ |
| static const u16 b43_qos_shm_offsets[] = { |
| /* [mac80211-queue-nr] = SHM_OFFSET, */ |
| [0] = B43_QOS_VOICE, |
| [1] = B43_QOS_VIDEO, |
| [2] = B43_QOS_BESTEFFORT, |
| [3] = B43_QOS_BACKGROUND, |
| }; |
| |
| /* Update all QOS parameters in hardware. */ |
| static void b43_qos_upload_all(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| struct b43_qos_params *params; |
| unsigned int i; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != |
| ARRAY_SIZE(wl->qos_params)); |
| |
| b43_mac_suspend(dev); |
| for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { |
| params = &(wl->qos_params[i]); |
| b43_qos_params_upload(dev, &(params->p), |
| b43_qos_shm_offsets[i]); |
| } |
| b43_mac_enable(dev); |
| } |
| |
| static void b43_qos_clear(struct b43_wl *wl) |
| { |
| struct b43_qos_params *params; |
| unsigned int i; |
| |
| /* Initialize QoS parameters to sane defaults. */ |
| |
| BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != |
| ARRAY_SIZE(wl->qos_params)); |
| |
| for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { |
| params = &(wl->qos_params[i]); |
| |
| switch (b43_qos_shm_offsets[i]) { |
| case B43_QOS_VOICE: |
| params->p.txop = 0; |
| params->p.aifs = 2; |
| params->p.cw_min = 0x0001; |
| params->p.cw_max = 0x0001; |
| break; |
| case B43_QOS_VIDEO: |
| params->p.txop = 0; |
| params->p.aifs = 2; |
| params->p.cw_min = 0x0001; |
| params->p.cw_max = 0x0001; |
| break; |
| case B43_QOS_BESTEFFORT: |
| params->p.txop = 0; |
| params->p.aifs = 3; |
| params->p.cw_min = 0x0001; |
| params->p.cw_max = 0x03FF; |
| break; |
| case B43_QOS_BACKGROUND: |
| params->p.txop = 0; |
| params->p.aifs = 7; |
| params->p.cw_min = 0x0001; |
| params->p.cw_max = 0x03FF; |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| } |
| } |
| |
| /* Initialize the core's QOS capabilities */ |
| static void b43_qos_init(struct b43_wldev *dev) |
| { |
| /* Upload the current QOS parameters. */ |
| b43_qos_upload_all(dev); |
| |
| /* Enable QOS support. */ |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); |
| b43_write16(dev, B43_MMIO_IFSCTL, |
| b43_read16(dev, B43_MMIO_IFSCTL) |
| | B43_MMIO_IFSCTL_USE_EDCF); |
| } |
| |
| static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, |
| const struct ieee80211_tx_queue_params *params) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| unsigned int queue = (unsigned int)_queue; |
| int err = -ENODEV; |
| |
| if (queue >= ARRAY_SIZE(wl->qos_params)) { |
| /* Queue not available or don't support setting |
| * params on this queue. Return success to not |
| * confuse mac80211. */ |
| return 0; |
| } |
| BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != |
| ARRAY_SIZE(wl->qos_params)); |
| |
| mutex_lock(&wl->mutex); |
| dev = wl->current_dev; |
| if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) |
| goto out_unlock; |
| |
| memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); |
| b43_mac_suspend(dev); |
| b43_qos_params_upload(dev, &(wl->qos_params[queue].p), |
| b43_qos_shm_offsets[queue]); |
| b43_mac_enable(dev); |
| err = 0; |
| |
| out_unlock: |
| mutex_unlock(&wl->mutex); |
| |
| return err; |
| } |
| |
| static int b43_op_get_tx_stats(struct ieee80211_hw *hw, |
| struct ieee80211_tx_queue_stats *stats) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| unsigned long flags; |
| int err = -ENODEV; |
| |
| if (!dev) |
| goto out; |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| if (likely(b43_status(dev) >= B43_STAT_STARTED)) { |
| if (b43_using_pio_transfers(dev)) |
| b43_pio_get_tx_stats(dev, stats); |
| else |
| b43_dma_get_tx_stats(dev, stats); |
| err = 0; |
| } |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| out: |
| return err; |
| } |
| |
| static int b43_op_get_stats(struct ieee80211_hw *hw, |
| struct ieee80211_low_level_stats *stats) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| memcpy(stats, &wl->ieee_stats, sizeof(*stats)); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| |
| return 0; |
| } |
| |
| static u64 b43_op_get_tsf(struct ieee80211_hw *hw) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| u64 tsf; |
| |
| mutex_lock(&wl->mutex); |
| spin_lock_irq(&wl->irq_lock); |
| dev = wl->current_dev; |
| |
| if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) |
| b43_tsf_read(dev, &tsf); |
| else |
| tsf = 0; |
| |
| spin_unlock_irq(&wl->irq_lock); |
| mutex_unlock(&wl->mutex); |
| |
| return tsf; |
| } |
| |
| static void b43_op_set_tsf(struct ieee80211_hw *hw, u64 tsf) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| spin_lock_irq(&wl->irq_lock); |
| dev = wl->current_dev; |
| |
| if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) |
| b43_tsf_write(dev, tsf); |
| |
| spin_unlock_irq(&wl->irq_lock); |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void b43_put_phy_into_reset(struct b43_wldev *dev) |
| { |
| struct ssb_device *sdev = dev->dev; |
| u32 tmslow; |
| |
| tmslow = ssb_read32(sdev, SSB_TMSLOW); |
| tmslow &= ~B43_TMSLOW_GMODE; |
| tmslow |= B43_TMSLOW_PHYRESET; |
| tmslow |= SSB_TMSLOW_FGC; |
| ssb_write32(sdev, SSB_TMSLOW, tmslow); |
| msleep(1); |
| |
| tmslow = ssb_read32(sdev, SSB_TMSLOW); |
| tmslow &= ~SSB_TMSLOW_FGC; |
| tmslow |= B43_TMSLOW_PHYRESET; |
| ssb_write32(sdev, SSB_TMSLOW, tmslow); |
| msleep(1); |
| } |
| |
| static const char *band_to_string(enum ieee80211_band band) |
| { |
| switch (band) { |
| case IEEE80211_BAND_5GHZ: |
| return "5"; |
| case IEEE80211_BAND_2GHZ: |
| return "2.4"; |
| default: |
| break; |
| } |
| B43_WARN_ON(1); |
| return ""; |
| } |
| |
| /* Expects wl->mutex locked */ |
| static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan) |
| { |
| struct b43_wldev *up_dev = NULL; |
| struct b43_wldev *down_dev; |
| struct b43_wldev *d; |
| int err; |
| bool uninitialized_var(gmode); |
| int prev_status; |
| |
| /* Find a device and PHY which supports the band. */ |
| list_for_each_entry(d, &wl->devlist, list) { |
| switch (chan->band) { |
| case IEEE80211_BAND_5GHZ: |
| if (d->phy.supports_5ghz) { |
| up_dev = d; |
| gmode = 0; |
| } |
| break; |
| case IEEE80211_BAND_2GHZ: |
| if (d->phy.supports_2ghz) { |
| up_dev = d; |
| gmode = 1; |
| } |
| break; |
| default: |
| B43_WARN_ON(1); |
| return -EINVAL; |
| } |
| if (up_dev) |
| break; |
| } |
| if (!up_dev) { |
| b43err(wl, "Could not find a device for %s-GHz band operation\n", |
| band_to_string(chan->band)); |
| return -ENODEV; |
| } |
| if ((up_dev == wl->current_dev) && |
| (!!wl->current_dev->phy.gmode == !!gmode)) { |
| /* This device is already running. */ |
| return 0; |
| } |
| b43dbg(wl, "Switching to %s-GHz band\n", |
| band_to_string(chan->band)); |
| down_dev = wl->current_dev; |
| |
| prev_status = b43_status(down_dev); |
| /* Shutdown the currently running core. */ |
| if (prev_status >= B43_STAT_STARTED) |
| b43_wireless_core_stop(down_dev); |
| if (prev_status >= B43_STAT_INITIALIZED) |
| b43_wireless_core_exit(down_dev); |
| |
| if (down_dev != up_dev) { |
| /* We switch to a different core, so we put PHY into |
| * RESET on the old core. */ |
| b43_put_phy_into_reset(down_dev); |
| } |
| |
| /* Now start the new core. */ |
| up_dev->phy.gmode = gmode; |
| if (prev_status >= B43_STAT_INITIALIZED) { |
| err = b43_wireless_core_init(up_dev); |
| if (err) { |
| b43err(wl, "Fatal: Could not initialize device for " |
| "selected %s-GHz band\n", |
| band_to_string(chan->band)); |
| goto init_failure; |
| } |
| } |
| if (prev_status >= B43_STAT_STARTED) { |
| err = b43_wireless_core_start(up_dev); |
| if (err) { |
| b43err(wl, "Fatal: Coult not start device for " |
| "selected %s-GHz band\n", |
| band_to_string(chan->band)); |
| b43_wireless_core_exit(up_dev); |
| goto init_failure; |
| } |
| } |
| B43_WARN_ON(b43_status(up_dev) != prev_status); |
| |
| wl->current_dev = up_dev; |
| |
| return 0; |
| init_failure: |
| /* Whoops, failed to init the new core. No core is operating now. */ |
| wl->current_dev = NULL; |
| return err; |
| } |
| |
| /* Write the short and long frame retry limit values. */ |
| static void b43_set_retry_limits(struct b43_wldev *dev, |
| unsigned int short_retry, |
| unsigned int long_retry) |
| { |
| /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing |
| * the chip-internal counter. */ |
| short_retry = min(short_retry, (unsigned int)0xF); |
| long_retry = min(long_retry, (unsigned int)0xF); |
| |
| b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, |
| short_retry); |
| b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, |
| long_retry); |
| } |
| |
| static int b43_op_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| struct b43_phy *phy; |
| struct ieee80211_conf *conf = &hw->conf; |
| unsigned long flags; |
| int antenna; |
| int err = 0; |
| |
| mutex_lock(&wl->mutex); |
| |
| /* Switch the band (if necessary). This might change the active core. */ |
| err = b43_switch_band(wl, conf->channel); |
| if (err) |
| goto out_unlock_mutex; |
| dev = wl->current_dev; |
| phy = &dev->phy; |
| |
| b43_mac_suspend(dev); |
| |
| if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) |
| b43_set_retry_limits(dev, conf->short_frame_max_tx_count, |
| conf->long_frame_max_tx_count); |
| changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS; |
| if (!changed) |
| goto out_mac_enable; |
| |
| /* Switch to the requested channel. |
| * The firmware takes care of races with the TX handler. */ |
| if (conf->channel->hw_value != phy->channel) |
| b43_switch_channel(dev, conf->channel->hw_value); |
| |
| dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); |
| |
| /* Adjust the desired TX power level. */ |
| if (conf->power_level != 0) { |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| if (conf->power_level != phy->desired_txpower) { |
| phy->desired_txpower = conf->power_level; |
| b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | |
| B43_TXPWR_IGNORE_TSSI); |
| } |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| } |
| |
| /* Antennas for RX and management frame TX. */ |
| antenna = B43_ANTENNA_DEFAULT; |
| b43_mgmtframe_txantenna(dev, antenna); |
| antenna = B43_ANTENNA_DEFAULT; |
| if (phy->ops->set_rx_antenna) |
| phy->ops->set_rx_antenna(dev, antenna); |
| |
| /* Update templates for AP/mesh mode. */ |
| if (b43_is_mode(wl, NL80211_IFTYPE_AP) || |
| b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) |
| b43_set_beacon_int(dev, conf->beacon_int); |
| |
| if (!!conf->radio_enabled != phy->radio_on) { |
| if (conf->radio_enabled) { |
| b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); |
| b43info(dev->wl, "Radio turned on by software\n"); |
| if (!dev->radio_hw_enable) { |
| b43info(dev->wl, "The hardware RF-kill button " |
| "still turns the radio physically off. " |
| "Press the button to turn it on.\n"); |
| } |
| } else { |
| b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); |
| b43info(dev->wl, "Radio turned off by software\n"); |
| } |
| } |
| |
| out_mac_enable: |
| b43_mac_enable(dev); |
| out_unlock_mutex: |
| mutex_unlock(&wl->mutex); |
| |
| return err; |
| } |
| |
| static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates) |
| { |
| struct ieee80211_supported_band *sband = |
| dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)]; |
| struct ieee80211_rate *rate; |
| int i; |
| u16 basic, direct, offset, basic_offset, rateptr; |
| |
| for (i = 0; i < sband->n_bitrates; i++) { |
| rate = &sband->bitrates[i]; |
| |
| if (b43_is_cck_rate(rate->hw_value)) { |
| direct = B43_SHM_SH_CCKDIRECT; |
| basic = B43_SHM_SH_CCKBASIC; |
| offset = b43_plcp_get_ratecode_cck(rate->hw_value); |
| offset &= 0xF; |
| } else { |
| direct = B43_SHM_SH_OFDMDIRECT; |
| basic = B43_SHM_SH_OFDMBASIC; |
| offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); |
| offset &= 0xF; |
| } |
| |
| rate = ieee80211_get_response_rate(sband, brates, rate->bitrate); |
| |
| if (b43_is_cck_rate(rate->hw_value)) { |
| basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value); |
| basic_offset &= 0xF; |
| } else { |
| basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); |
| basic_offset &= 0xF; |
| } |
| |
| /* |
| * Get the pointer that we need to point to |
| * from the direct map |
| */ |
| rateptr = b43_shm_read16(dev, B43_SHM_SHARED, |
| direct + 2 * basic_offset); |
| /* and write it to the basic map */ |
| b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset, |
| rateptr); |
| } |
| } |
| |
| static void b43_op_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *conf, |
| u32 changed) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| |
| dev = wl->current_dev; |
| if (!dev || b43_status(dev) < B43_STAT_STARTED) |
| goto out_unlock_mutex; |
| b43_mac_suspend(dev); |
| |
| if (changed & BSS_CHANGED_BASIC_RATES) |
| b43_update_basic_rates(dev, conf->basic_rates); |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| if (conf->use_short_slot) |
| b43_short_slot_timing_enable(dev); |
| else |
| b43_short_slot_timing_disable(dev); |
| } |
| |
| b43_mac_enable(dev); |
| out_unlock_mutex: |
| mutex_unlock(&wl->mutex); |
| |
| return; |
| } |
| |
| static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| u8 algorithm; |
| u8 index; |
| int err; |
| static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| |
| if (modparam_nohwcrypt) |
| return -ENOSPC; /* User disabled HW-crypto */ |
| |
| mutex_lock(&wl->mutex); |
| spin_lock_irq(&wl->irq_lock); |
| write_lock(&wl->tx_lock); |
| /* Why do we need all this locking here? |
| * mutex -> Every config operation must take it. |
| * irq_lock -> We modify the dev->key array, which is accessed |
| * in the IRQ handlers. |
| * tx_lock -> We modify the dev->key array, which is accessed |
| * in the TX handler. |
| */ |
| |
| dev = wl->current_dev; |
| err = -ENODEV; |
| if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) |
| goto out_unlock; |
| |
| if (dev->fw.pcm_request_failed) { |
| /* We don't have firmware for the crypto engine. |
| * Must use software-crypto. */ |
| err = -EOPNOTSUPP; |
| goto out_unlock; |
| } |
| |
| err = -EINVAL; |
| switch (key->alg) { |
| case ALG_WEP: |
| if (key->keylen == LEN_WEP40) |
| algorithm = B43_SEC_ALGO_WEP40; |
| else |
| algorithm = B43_SEC_ALGO_WEP104; |
| break; |
| case ALG_TKIP: |
| algorithm = B43_SEC_ALGO_TKIP; |
| break; |
| case ALG_CCMP: |
| algorithm = B43_SEC_ALGO_AES; |
| break; |
| default: |
| B43_WARN_ON(1); |
| goto out_unlock; |
| } |
| index = (u8) (key->keyidx); |
| if (index > 3) |
| goto out_unlock; |
| |
| switch (cmd) { |
| case SET_KEY: |
| if (algorithm == B43_SEC_ALGO_TKIP) { |
| /* FIXME: No TKIP hardware encryption for now. */ |
| err = -EOPNOTSUPP; |
| goto out_unlock; |
| } |
| |
| if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { |
| if (WARN_ON(!sta)) { |
| err = -EOPNOTSUPP; |
| goto out_unlock; |
| } |
| /* Pairwise key with an assigned MAC address. */ |
| err = b43_key_write(dev, -1, algorithm, |
| key->key, key->keylen, |
| sta->addr, key); |
| } else { |
| /* Group key */ |
| err = b43_key_write(dev, index, algorithm, |
| key->key, key->keylen, NULL, key); |
| } |
| if (err) |
| goto out_unlock; |
| |
| if (algorithm == B43_SEC_ALGO_WEP40 || |
| algorithm == B43_SEC_ALGO_WEP104) { |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS); |
| } else { |
| b43_hf_write(dev, |
| b43_hf_read(dev) & ~B43_HF_USEDEFKEYS); |
| } |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| break; |
| case DISABLE_KEY: { |
| err = b43_key_clear(dev, key->hw_key_idx); |
| if (err) |
| goto out_unlock; |
| break; |
| } |
| default: |
| B43_WARN_ON(1); |
| } |
| |
| out_unlock: |
| if (!err) { |
| b43dbg(wl, "%s hardware based encryption for keyidx: %d, " |
| "mac: %pM\n", |
| cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, |
| sta ? sta->addr : bcast_addr); |
| b43_dump_keymemory(dev); |
| } |
| write_unlock(&wl->tx_lock); |
| spin_unlock_irq(&wl->irq_lock); |
| mutex_unlock(&wl->mutex); |
| |
| return err; |
| } |
| |
| static void b43_op_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed, unsigned int *fflags, |
| int mc_count, struct dev_addr_list *mc_list) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| unsigned long flags; |
| |
| if (!dev) { |
| *fflags = 0; |
| return; |
| } |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| *fflags &= FIF_PROMISC_IN_BSS | |
| FIF_ALLMULTI | |
| FIF_FCSFAIL | |
| FIF_PLCPFAIL | |
| FIF_CONTROL | |
| FIF_OTHER_BSS | |
| FIF_BCN_PRBRESP_PROMISC; |
| |
| changed &= FIF_PROMISC_IN_BSS | |
| FIF_ALLMULTI | |
| FIF_FCSFAIL | |
| FIF_PLCPFAIL | |
| FIF_CONTROL | |
| FIF_OTHER_BSS | |
| FIF_BCN_PRBRESP_PROMISC; |
| |
| wl->filter_flags = *fflags; |
| |
| if (changed && b43_status(dev) >= B43_STAT_INITIALIZED) |
| b43_adjust_opmode(dev); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| } |
| |
| static int b43_op_config_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_if_conf *conf) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| unsigned long flags; |
| |
| if (!dev) |
| return -ENODEV; |
| mutex_lock(&wl->mutex); |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| B43_WARN_ON(wl->vif != vif); |
| if (conf->bssid) |
| memcpy(wl->bssid, conf->bssid, ETH_ALEN); |
| else |
| memset(wl->bssid, 0, ETH_ALEN); |
| if (b43_status(dev) >= B43_STAT_INITIALIZED) { |
| if (b43_is_mode(wl, NL80211_IFTYPE_AP) || |
| b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { |
| B43_WARN_ON(vif->type != wl->if_type); |
| if (conf->changed & IEEE80211_IFCC_BEACON) |
| b43_update_templates(wl); |
| } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { |
| if (conf->changed & IEEE80211_IFCC_BEACON) |
| b43_update_templates(wl); |
| } |
| b43_write_mac_bssid_templates(dev); |
| } |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| mutex_unlock(&wl->mutex); |
| |
| return 0; |
| } |
| |
| /* Locking: wl->mutex */ |
| static void b43_wireless_core_stop(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| unsigned long flags; |
| |
| if (b43_status(dev) < B43_STAT_STARTED) |
| return; |
| |
| /* Disable and sync interrupts. We must do this before than |
| * setting the status to INITIALIZED, as the interrupt handler |
| * won't care about IRQs then. */ |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| b43_synchronize_irq(dev); |
| |
| write_lock_irqsave(&wl->tx_lock, flags); |
| b43_set_status(dev, B43_STAT_INITIALIZED); |
| write_unlock_irqrestore(&wl->tx_lock, flags); |
| |
| b43_pio_stop(dev); |
| mutex_unlock(&wl->mutex); |
| /* Must unlock as it would otherwise deadlock. No races here. |
| * Cancel the possibly running self-rearming periodic work. */ |
| cancel_delayed_work_sync(&dev->periodic_work); |
| mutex_lock(&wl->mutex); |
| |
| b43_mac_suspend(dev); |
| free_irq(dev->dev->irq, dev); |
| b43dbg(wl, "Wireless interface stopped\n"); |
| } |
| |
| /* Locking: wl->mutex */ |
| static int b43_wireless_core_start(struct b43_wldev *dev) |
| { |
| int err; |
| |
| B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); |
| |
| drain_txstatus_queue(dev); |
| err = request_irq(dev->dev->irq, b43_interrupt_handler, |
| IRQF_SHARED, KBUILD_MODNAME, dev); |
| if (err) { |
| b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); |
| goto out; |
| } |
| |
| /* We are ready to run. */ |
| b43_set_status(dev, B43_STAT_STARTED); |
| |
| /* Start data flow (TX/RX). */ |
| b43_mac_enable(dev); |
| b43_interrupt_enable(dev, dev->irq_savedstate); |
| |
| /* Start maintainance work */ |
| b43_periodic_tasks_setup(dev); |
| |
| b43dbg(dev->wl, "Wireless interface started\n"); |
| out: |
| return err; |
| } |
| |
| /* Get PHY and RADIO versioning numbers */ |
| static int b43_phy_versioning(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u32 tmp; |
| u8 analog_type; |
| u8 phy_type; |
| u8 phy_rev; |
| u16 radio_manuf; |
| u16 radio_ver; |
| u16 radio_rev; |
| int unsupported = 0; |
| |
| /* Get PHY versioning */ |
| tmp = b43_read16(dev, B43_MMIO_PHY_VER); |
| analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT; |
| phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT; |
| phy_rev = (tmp & B43_PHYVER_VERSION); |
| switch (phy_type) { |
| case B43_PHYTYPE_A: |
| if (phy_rev >= 4) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_B: |
| if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 |
| && phy_rev != 7) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_G: |
| if (phy_rev > 9) |
| unsupported = 1; |
| break; |
| #ifdef CONFIG_B43_NPHY |
| case B43_PHYTYPE_N: |
| if (phy_rev > 4) |
| unsupported = 1; |
| break; |
| #endif |
| #ifdef CONFIG_B43_PHY_LP |
| case B43_PHYTYPE_LP: |
| if (phy_rev > 1) |
| unsupported = 1; |
| break; |
| #endif |
| default: |
| unsupported = 1; |
| }; |
| if (unsupported) { |
| b43err(dev->wl, "FOUND UNSUPPORTED PHY " |
| "(Analog %u, Type %u, Revision %u)\n", |
| analog_type, phy_type, phy_rev); |
| return -EOPNOTSUPP; |
| } |
| b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", |
| analog_type, phy_type, phy_rev); |
| |
| /* Get RADIO versioning */ |
| if (dev->dev->bus->chip_id == 0x4317) { |
| if (dev->dev->bus->chip_rev == 0) |
| tmp = 0x3205017F; |
| else if (dev->dev->bus->chip_rev == 1) |
| tmp = 0x4205017F; |
| else |
| tmp = 0x5205017F; |
| } else { |
| b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); |
| tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); |
| b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); |
| tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16; |
| } |
| radio_manuf = (tmp & 0x00000FFF); |
| radio_ver = (tmp & 0x0FFFF000) >> 12; |
| radio_rev = (tmp & 0xF0000000) >> 28; |
| if (radio_manuf != 0x17F /* Broadcom */) |
| unsupported = 1; |
| switch (phy_type) { |
| case B43_PHYTYPE_A: |
| if (radio_ver != 0x2060) |
| unsupported = 1; |
| if (radio_rev != 1) |
| unsupported = 1; |
| if (radio_manuf != 0x17F) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_B: |
| if ((radio_ver & 0xFFF0) != 0x2050) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_G: |
| if (radio_ver != 0x2050) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_N: |
| if (radio_ver != 0x2055 && radio_ver != 0x2056) |
| unsupported = 1; |
| break; |
| case B43_PHYTYPE_LP: |
| if (radio_ver != 0x2062) |
| unsupported = 1; |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| if (unsupported) { |
| b43err(dev->wl, "FOUND UNSUPPORTED RADIO " |
| "(Manuf 0x%X, Version 0x%X, Revision %u)\n", |
| radio_manuf, radio_ver, radio_rev); |
| return -EOPNOTSUPP; |
| } |
| b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n", |
| radio_manuf, radio_ver, radio_rev); |
| |
| phy->radio_manuf = radio_manuf; |
| phy->radio_ver = radio_ver; |
| phy->radio_rev = radio_rev; |
| |
| phy->analog = analog_type; |
| phy->type = phy_type; |
| phy->rev = phy_rev; |
| |
| return 0; |
| } |
| |
| static void setup_struct_phy_for_init(struct b43_wldev *dev, |
| struct b43_phy *phy) |
| { |
| phy->hardware_power_control = !!modparam_hwpctl; |
| phy->next_txpwr_check_time = jiffies; |
| /* PHY TX errors counter. */ |
| atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); |
| |
| #if B43_DEBUG |
| phy->phy_locked = 0; |
| phy->radio_locked = 0; |
| #endif |
| } |
| |
| static void setup_struct_wldev_for_init(struct b43_wldev *dev) |
| { |
| dev->dfq_valid = 0; |
| |
| /* Assume the radio is enabled. If it's not enabled, the state will |
| * immediately get fixed on the first periodic work run. */ |
| dev->radio_hw_enable = 1; |
| |
| /* Stats */ |
| memset(&dev->stats, 0, sizeof(dev->stats)); |
| |
| setup_struct_phy_for_init(dev, &dev->phy); |
| |
| /* IRQ related flags */ |
| dev->irq_reason = 0; |
| memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); |
| dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; |
| if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) |
| dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR; |
| |
| dev->mac_suspended = 1; |
| |
| /* Noise calculation context */ |
| memset(&dev->noisecalc, 0, sizeof(dev->noisecalc)); |
| } |
| |
| static void b43_bluetooth_coext_enable(struct b43_wldev *dev) |
| { |
| struct ssb_sprom *sprom = &dev->dev->bus->sprom; |
| u64 hf; |
| |
| if (!modparam_btcoex) |
| return; |
| if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST)) |
| return; |
| if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode) |
| return; |
| |
| hf = b43_hf_read(dev); |
| if (sprom->boardflags_lo & B43_BFL_BTCMOD) |
| hf |= B43_HF_BTCOEXALT; |
| else |
| hf |= B43_HF_BTCOEX; |
| b43_hf_write(dev, hf); |
| } |
| |
| static void b43_bluetooth_coext_disable(struct b43_wldev *dev) |
| { |
| if (!modparam_btcoex) |
| return; |
| //TODO |
| } |
| |
| static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) |
| { |
| #ifdef CONFIG_SSB_DRIVER_PCICORE |
| struct ssb_bus *bus = dev->dev->bus; |
| u32 tmp; |
| |
| if (bus->pcicore.dev && |
| bus->pcicore.dev->id.coreid == SSB_DEV_PCI && |
| bus->pcicore.dev->id.revision <= 5) { |
| /* IMCFGLO timeouts workaround. */ |
| tmp = ssb_read32(dev->dev, SSB_IMCFGLO); |
| tmp &= ~SSB_IMCFGLO_REQTO; |
| tmp &= ~SSB_IMCFGLO_SERTO; |
| switch (bus->bustype) { |
| case SSB_BUSTYPE_PCI: |
| case SSB_BUSTYPE_PCMCIA: |
| tmp |= 0x32; |
| break; |
| case SSB_BUSTYPE_SSB: |
| tmp |= 0x53; |
| break; |
| } |
| ssb_write32(dev->dev, SSB_IMCFGLO, tmp); |
| } |
| #endif /* CONFIG_SSB_DRIVER_PCICORE */ |
| } |
| |
| static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) |
| { |
| u16 pu_delay; |
| |
| /* The time value is in microseconds. */ |
| if (dev->phy.type == B43_PHYTYPE_A) |
| pu_delay = 3700; |
| else |
| pu_delay = 1050; |
| if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) |
| pu_delay = 500; |
| if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) |
| pu_delay = max(pu_delay, (u16)2400); |
| |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay); |
| } |
| |
| /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */ |
| static void b43_set_pretbtt(struct b43_wldev *dev) |
| { |
| u16 pretbtt; |
| |
| /* The time value is in microseconds. */ |
| if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { |
| pretbtt = 2; |
| } else { |
| if (dev->phy.type == B43_PHYTYPE_A) |
| pretbtt = 120; |
| else |
| pretbtt = 250; |
| } |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt); |
| b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt); |
| } |
| |
| /* Shutdown a wireless core */ |
| /* Locking: wl->mutex */ |
| static void b43_wireless_core_exit(struct b43_wldev *dev) |
| { |
| u32 macctl; |
| |
| B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); |
| if (b43_status(dev) != B43_STAT_INITIALIZED) |
| return; |
| b43_set_status(dev, B43_STAT_UNINIT); |
| |
| /* Stop the microcode PSM. */ |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| macctl &= ~B43_MACCTL_PSM_RUN; |
| macctl |= B43_MACCTL_PSM_JMP0; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| |
| if (!dev->suspend_in_progress) { |
| b43_leds_exit(dev); |
| b43_rng_exit(dev->wl); |
| } |
| b43_dma_free(dev); |
| b43_pio_free(dev); |
| b43_chip_exit(dev); |
| dev->phy.ops->switch_analog(dev, 0); |
| if (dev->wl->current_beacon) { |
| dev_kfree_skb_any(dev->wl->current_beacon); |
| dev->wl->current_beacon = NULL; |
| } |
| |
| ssb_device_disable(dev->dev, 0); |
| ssb_bus_may_powerdown(dev->dev->bus); |
| } |
| |
| /* Initialize a wireless core */ |
| static int b43_wireless_core_init(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| struct ssb_bus *bus = dev->dev->bus; |
| struct ssb_sprom *sprom = &bus->sprom; |
| struct b43_phy *phy = &dev->phy; |
| int err; |
| u64 hf; |
| u32 tmp; |
| |
| B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); |
| |
| err = ssb_bus_powerup(bus, 0); |
| if (err) |
| goto out; |
| if (!ssb_device_is_enabled(dev->dev)) { |
| tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; |
| b43_wireless_core_reset(dev, tmp); |
| } |
| |
| /* Reset all data structures. */ |
| setup_struct_wldev_for_init(dev); |
| phy->ops->prepare_structs(dev); |
| |
| /* Enable IRQ routing to this device. */ |
| ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); |
| |
| b43_imcfglo_timeouts_workaround(dev); |
| b43_bluetooth_coext_disable(dev); |
| if (phy->ops->prepare_hardware) { |
| err = phy->ops->prepare_hardware(dev); |
| if (err) |
| goto err_busdown; |
| } |
| err = b43_chip_init(dev); |
| if (err) |
| goto err_busdown; |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_WLCOREREV, dev->dev->id.revision); |
| hf = b43_hf_read(dev); |
| if (phy->type == B43_PHYTYPE_G) { |
| hf |= B43_HF_SYMW; |
| if (phy->rev == 1) |
| hf |= B43_HF_GDCW; |
| if (sprom->boardflags_lo & B43_BFL_PACTRL) |
| hf |= B43_HF_OFDMPABOOST; |
| } |
| if (phy->radio_ver == 0x2050) { |
| if (phy->radio_rev == 6) |
| hf |= B43_HF_4318TSSI; |
| if (phy->radio_rev < 6) |
| hf |= B43_HF_VCORECALC; |
| } |
| if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) |
| hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ |
| #ifdef CONFIG_SSB_DRIVER_PCICORE |
| if ((bus->bustype == SSB_BUSTYPE_PCI) && |
| (bus->pcicore.dev->id.revision <= 10)) |
| hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */ |
| #endif |
| hf &= ~B43_HF_SKCFPUP; |
| b43_hf_write(dev, hf); |
| |
| b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT, |
| B43_DEFAULT_LONG_RETRY_LIMIT); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2); |
| |
| /* Disable sending probe responses from firmware. |
| * Setting the MaxTime to one usec will always trigger |
| * a timeout, so we never send any probe resp. |
| * A timeout of zero is infinite. */ |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1); |
| |
| b43_rate_memory_init(dev); |
| b43_set_phytxctl_defaults(dev); |
| |
| /* Minimum Contention Window */ |
| if (phy->type == B43_PHYTYPE_B) { |
| b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F); |
| } else { |
| b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF); |
| } |
| /* Maximum Contention Window */ |
| b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); |
| |
| if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) { |
| dev->__using_pio_transfers = 1; |
| err = b43_pio_init(dev); |
| } else { |
| dev->__using_pio_transfers = 0; |
| err = b43_dma_init(dev); |
| } |
| if (err) |
| goto err_chip_exit; |
| b43_qos_init(dev); |
| b43_set_synth_pu_delay(dev, 1); |
| b43_bluetooth_coext_enable(dev); |
| |
| ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); |
| b43_upload_card_macaddress(dev); |
| b43_security_init(dev); |
| if (!dev->suspend_in_progress) |
| b43_rng_init(wl); |
| |
| b43_set_status(dev, B43_STAT_INITIALIZED); |
| |
| if (!dev->suspend_in_progress) |
| b43_leds_init(dev); |
| out: |
| return err; |
| |
| err_chip_exit: |
| b43_chip_exit(dev); |
| err_busdown: |
| ssb_bus_may_powerdown(bus); |
| B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); |
| return err; |
| } |
| |
| static int b43_op_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_if_init_conf *conf) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| unsigned long flags; |
| int err = -EOPNOTSUPP; |
| |
| /* TODO: allow WDS/AP devices to coexist */ |
| |
| if (conf->type != NL80211_IFTYPE_AP && |
| conf->type != NL80211_IFTYPE_MESH_POINT && |
| conf->type != NL80211_IFTYPE_STATION && |
| conf->type != NL80211_IFTYPE_WDS && |
| conf->type != NL80211_IFTYPE_ADHOC) |
| return -EOPNOTSUPP; |
| |
| mutex_lock(&wl->mutex); |
| if (wl->operating) |
| goto out_mutex_unlock; |
| |
| b43dbg(wl, "Adding Interface type %d\n", conf->type); |
| |
| dev = wl->current_dev; |
| wl->operating = 1; |
| wl->vif = conf->vif; |
| wl->if_type = conf->type; |
| memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| b43_adjust_opmode(dev); |
| b43_set_pretbtt(dev); |
| b43_set_synth_pu_delay(dev, 0); |
| b43_upload_card_macaddress(dev); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| |
| err = 0; |
| out_mutex_unlock: |
| mutex_unlock(&wl->mutex); |
| |
| return err; |
| } |
| |
| static void b43_op_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_if_init_conf *conf) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| unsigned long flags; |
| |
| b43dbg(wl, "Removing Interface type %d\n", conf->type); |
| |
| mutex_lock(&wl->mutex); |
| |
| B43_WARN_ON(!wl->operating); |
| B43_WARN_ON(wl->vif != conf->vif); |
| wl->vif = NULL; |
| |
| wl->operating = 0; |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| b43_adjust_opmode(dev); |
| memset(wl->mac_addr, 0, ETH_ALEN); |
| b43_upload_card_macaddress(dev); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int b43_op_start(struct ieee80211_hw *hw) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| int did_init = 0; |
| int err = 0; |
| bool do_rfkill_exit = 0; |
| |
| /* Kill all old instance specific information to make sure |
| * the card won't use it in the short timeframe between start |
| * and mac80211 reconfiguring it. */ |
| memset(wl->bssid, 0, ETH_ALEN); |
| memset(wl->mac_addr, 0, ETH_ALEN); |
| wl->filter_flags = 0; |
| wl->radiotap_enabled = 0; |
| b43_qos_clear(wl); |
| wl->beacon0_uploaded = 0; |
| wl->beacon1_uploaded = 0; |
| wl->beacon_templates_virgin = 1; |
| |
| /* First register RFkill. |
| * LEDs that are registered later depend on it. */ |
| b43_rfkill_init(dev); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (b43_status(dev) < B43_STAT_INITIALIZED) { |
| err = b43_wireless_core_init(dev); |
| if (err) { |
| do_rfkill_exit = 1; |
| goto out_mutex_unlock; |
| } |
| did_init = 1; |
| } |
| |
| if (b43_status(dev) < B43_STAT_STARTED) { |
| err = b43_wireless_core_start(dev); |
| if (err) { |
| if (did_init) |
| b43_wireless_core_exit(dev); |
| do_rfkill_exit = 1; |
| goto out_mutex_unlock; |
| } |
| } |
| |
| out_mutex_unlock: |
| mutex_unlock(&wl->mutex); |
| |
| if (do_rfkill_exit) |
| b43_rfkill_exit(dev); |
| |
| return err; |
| } |
| |
| static void b43_op_stop(struct ieee80211_hw *hw) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev = wl->current_dev; |
| |
| b43_rfkill_exit(dev); |
| cancel_work_sync(&(wl->beacon_update_trigger)); |
| |
| mutex_lock(&wl->mutex); |
| if (b43_status(dev) >= B43_STAT_STARTED) |
| b43_wireless_core_stop(dev); |
| b43_wireless_core_exit(dev); |
| mutex_unlock(&wl->mutex); |
| |
| cancel_work_sync(&(wl->txpower_adjust_work)); |
| } |
| |
| static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, bool set) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wl->irq_lock, flags); |
| b43_update_templates(wl); |
| spin_unlock_irqrestore(&wl->irq_lock, flags); |
| |
| return 0; |
| } |
| |
| static void b43_op_sta_notify(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum sta_notify_cmd notify_cmd, |
| struct ieee80211_sta *sta) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| |
| B43_WARN_ON(!vif || wl->vif != vif); |
| } |
| |
| static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| dev = wl->current_dev; |
| if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { |
| /* Disable CFP update during scan on other channels. */ |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP); |
| } |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw) |
| { |
| struct b43_wl *wl = hw_to_b43_wl(hw); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| dev = wl->current_dev; |
| if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { |
| /* Re-enable CFP update. */ |
| b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP); |
| } |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static const struct ieee80211_ops b43_hw_ops = { |
| .tx = b43_op_tx, |
| .conf_tx = b43_op_conf_tx, |
| .add_interface = b43_op_add_interface, |
| .remove_interface = b43_op_remove_interface, |
| .config = b43_op_config, |
| .bss_info_changed = b43_op_bss_info_changed, |
| .config_interface = b43_op_config_interface, |
| .configure_filter = b43_op_configure_filter, |
| .set_key = b43_op_set_key, |
| .get_stats = b43_op_get_stats, |
| .get_tx_stats = b43_op_get_tx_stats, |
| .get_tsf = b43_op_get_tsf, |
| .set_tsf = b43_op_set_tsf, |
| .start = b43_op_start, |
| .stop = b43_op_stop, |
| .set_tim = b43_op_beacon_set_tim, |
| .sta_notify = b43_op_sta_notify, |
| .sw_scan_start = b43_op_sw_scan_start_notifier, |
| .sw_scan_complete = b43_op_sw_scan_complete_notifier, |
| }; |
| |
| /* Hard-reset the chip. Do not call this directly. |
| * Use b43_controller_restart() |
| */ |
| static void b43_chip_reset(struct work_struct *work) |
| { |
| struct b43_wldev *dev = |
| container_of(work, struct b43_wldev, restart_work); |
| struct b43_wl *wl = dev->wl; |
| int err = 0; |
| int prev_status; |
| |
| mutex_lock(&wl->mutex); |
| |
| prev_status = b43_status(dev); |
| /* Bring the device down... */ |
| if (prev_status >= B43_STAT_STARTED) |
| b43_wireless_core_stop(dev); |
| if (prev_status >= B43_STAT_INITIALIZED) |
| b43_wireless_core_exit(dev); |
| |
| /* ...and up again. */ |
| if (prev_status >= B43_STAT_INITIALIZED) { |
| err = b43_wireless_core_init(dev); |
| if (err) |
| goto out; |
| } |
| if (prev_status >= B43_STAT_STARTED) { |
| err = b43_wireless_core_start(dev); |
| if (err) { |
| b43_wireless_core_exit(dev); |
| goto out; |
| } |
| } |
| out: |
| if (err) |
| wl->current_dev = NULL; /* Failed to init the dev. */ |
| mutex_unlock(&wl->mutex); |
| if (err) |
| b43err(wl, "Controller restart FAILED\n"); |
| else |
| b43info(wl, "Controller restarted\n"); |
| } |
| |
| static int b43_setup_bands(struct b43_wldev *dev, |
| bool have_2ghz_phy, bool have_5ghz_phy) |
| { |
| struct ieee80211_hw *hw = dev->wl->hw; |
| |
| if (have_2ghz_phy) |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz; |
| if (dev->phy.type == B43_PHYTYPE_N) { |
| if (have_5ghz_phy) |
| hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy; |
| } else { |
| if (have_5ghz_phy) |
| hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy; |
| } |
| |
| dev->phy.supports_2ghz = have_2ghz_phy; |
| dev->phy.supports_5ghz = have_5ghz_phy; |
| |
| return 0; |
| } |
| |
| static void b43_wireless_core_detach(struct b43_wldev *dev) |
| { |
| /* We release firmware that late to not be required to re-request |
| * is all the time when we reinit the core. */ |
| b43_release_firmware(dev); |
| b43_phy_free(dev); |
| } |
| |
| static int b43_wireless_core_attach(struct b43_wldev *dev) |
| { |
| struct b43_wl *wl = dev->wl; |
| struct ssb_bus *bus = dev->dev->bus; |
| struct pci_dev *pdev = bus->host_pci; |
| int err; |
| bool have_2ghz_phy = 0, have_5ghz_phy = 0; |
| u32 tmp; |
| |
| /* Do NOT do any device initialization here. |
| * Do it in wireless_core_init() instead. |
| * This function is for gathering basic information about the HW, only. |
| * Also some structs may be set up here. But most likely you want to have |
| * that in core_init(), too. |
| */ |
| |
| err = ssb_bus_powerup(bus, 0); |
| if (err) { |
| b43err(wl, "Bus powerup failed\n"); |
| goto out; |
| } |
| /* Get the PHY type. */ |
| if (dev->dev->id.revision >= 5) { |
| u32 tmshigh; |
| |
| tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); |
| have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY); |
| have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY); |
| } else |
| B43_WARN_ON(1); |
| |
| dev->phy.gmode = have_2ghz_phy; |
| tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; |
| b43_wireless_core_reset(dev, tmp); |
| |
| err = b43_phy_versioning(dev); |
| if (err) |
| goto err_powerdown; |
| /* Check if this device supports multiband. */ |
| if (!pdev || |
| (pdev->device != 0x4312 && |
| pdev->device != 0x4319 && pdev->device != 0x4324)) { |
| /* No multiband support. */ |
| have_2ghz_phy = 0; |
| have_5ghz_phy = 0; |
| switch (dev->phy.type) { |
| case B43_PHYTYPE_A: |
| have_5ghz_phy = 1; |
| break; |
| case B43_PHYTYPE_G: |
| case B43_PHYTYPE_N: |
| case B43_PHYTYPE_LP: |
| have_2ghz_phy = 1; |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| } |
| if (dev->phy.type == B43_PHYTYPE_A) { |
| /* FIXME */ |
| b43err(wl, "IEEE 802.11a devices are unsupported\n"); |
| err = -EOPNOTSUPP; |
| goto err_powerdown; |
| } |
| if (1 /* disable A-PHY */) { |
| /* FIXME: For now we disable the A-PHY on multi-PHY devices. */ |
| if (dev->phy.type != B43_PHYTYPE_N) { |
| have_2ghz_phy = 1; |
| have_5ghz_phy = 0; |
| } |
| } |
| |
| err = b43_phy_allocate(dev); |
| if (err) |
| goto err_powerdown; |
| |
| dev->phy.gmode = have_2ghz_phy; |
| tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; |
| b43_wireless_core_reset(dev, tmp); |
| |
| err = b43_validate_chipaccess(dev); |
| if (err) |
| goto err_phy_free; |
| err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); |
| if (err) |
| goto err_phy_free; |
| |
| /* Now set some default "current_dev" */ |
| if (!wl->current_dev) |
| wl->current_dev = dev; |
| INIT_WORK(&dev->restart_work, b43_chip_reset); |
| |
| dev->phy.ops->switch_analog(dev, 0); |
| ssb_device_disable(dev->dev, 0); |
| ssb_bus_may_powerdown(bus); |
| |
| out: |
| return err; |
| |
| err_phy_free: |
| b43_phy_free(dev); |
| err_powerdown: |
| ssb_bus_may_powerdown(bus); |
| return err; |
| } |
| |
| static void b43_one_core_detach(struct ssb_device *dev) |
| { |
| struct b43_wldev *wldev; |
| struct b43_wl *wl; |
| |
| /* Do not cancel ieee80211-workqueue based work here. |
| * See comment in b43_remove(). */ |
| |
| wldev = ssb_get_drvdata(dev); |
| wl = wldev->wl; |
| b43_debugfs_remove_device(wldev); |
| b43_wireless_core_detach(wldev); |
| list_del(&wldev->list); |
| wl->nr_devs--; |
| ssb_set_drvdata(dev, NULL); |
| kfree(wldev); |
| } |
| |
| static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) |
| { |
| struct b43_wldev *wldev; |
| struct pci_dev *pdev; |
| int err = -ENOMEM; |
| |
| if (!list_empty(&wl->devlist)) { |
| /* We are not the first core on this chip. */ |
| pdev = dev->bus->host_pci; |
| /* Only special chips support more than one wireless |
| * core, although some of the other chips have more than |
| * one wireless core as well. Check for this and |
| * bail out early. |
| */ |
| if (!pdev || |
| ((pdev->device != 0x4321) && |
| (pdev->device != 0x4313) && (pdev->device != 0x431A))) { |
| b43dbg(wl, "Ignoring unconnected 802.11 core\n"); |
| return -ENODEV; |
| } |
| } |
| |
| wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); |
| if (!wldev) |
| goto out; |
| |
| wldev->dev = dev; |
| wldev->wl = wl; |
| b43_set_status(wldev, B43_STAT_UNINIT); |
| wldev->bad_frames_preempt = modparam_bad_frames_preempt; |
| tasklet_init(&wldev->isr_tasklet, |
| (void (*)(unsigned long))b43_interrupt_tasklet, |
| (unsigned long)wldev); |
| INIT_LIST_HEAD(&wldev->list); |
| |
| err = b43_wireless_core_attach(wldev); |
| if (err) |
| goto err_kfree_wldev; |
| |
| list_add(&wldev->list, &wl->devlist); |
| wl->nr_devs++; |
| ssb_set_drvdata(dev, wldev); |
| b43_debugfs_add_device(wldev); |
| |
| out: |
| return err; |
| |
| err_kfree_wldev: |
| kfree(wldev); |
| return err; |
| } |
| |
| #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice) ( \ |
| (pdev->vendor == PCI_VENDOR_ID_##_vendor) && \ |
| (pdev->device == _device) && \ |
| (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \ |
| (pdev->subsystem_device == _subdevice) ) |
| |
| static void b43_sprom_fixup(struct ssb_bus *bus) |
| { |
| struct pci_dev *pdev; |
| |
| /* boardflags workarounds */ |
| if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && |
| bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) |
| bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST; |
| if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && |
| bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) |
| bus->sprom.boardflags_lo |= B43_BFL_PACTRL; |
| if (bus->bustype == SSB_BUSTYPE_PCI) { |
| pdev = bus->host_pci; |
| if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || |
| IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) |
| bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; |
| } |
| } |
| |
| static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) |
| { |
| struct ieee80211_hw *hw = wl->hw; |
| |
| ssb_set_devtypedata(dev, NULL); |
| ieee80211_free_hw(hw); |
| } |
| |
| static int b43_wireless_init(struct ssb_device *dev) |
| { |
| struct ssb_sprom *sprom = &dev->bus->sprom; |
| struct ieee80211_hw *hw; |
| struct b43_wl *wl; |
| int err = -ENOMEM; |
| |
| b43_sprom_fixup(dev->bus); |
| |
| hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops); |
| if (!hw) { |
| b43err(NULL, "Could not allocate ieee80211 device\n"); |
| goto out; |
| } |
| |
| /* fill hw info */ |
| hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | |
| IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_NOISE_DBM; |
| |
| hw->wiphy->interface_modes = |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_MESH_POINT) | |
| BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_WDS) | |
| BIT(NL80211_IFTYPE_ADHOC); |
| |
| hw->queues = b43_modparam_qos ? 4 : 1; |
| hw->max_rates = 2; |
| SET_IEEE80211_DEV(hw, dev->dev); |
| if (is_valid_ether_addr(sprom->et1mac)) |
| SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); |
| else |
| SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); |
| |
| /* Get and initialize struct b43_wl */ |
| wl = hw_to_b43_wl(hw); |
| memset(wl, 0, sizeof(*wl)); |
| wl->hw = hw; |
| spin_lock_init(&wl->irq_lock); |
| rwlock_init(&wl->tx_lock); |
| spin_lock_init(&wl->leds_lock); |
| spin_lock_init(&wl->shm_lock); |
| mutex_init(&wl->mutex); |
| INIT_LIST_HEAD(&wl->devlist); |
| INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); |
| INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); |
| |
| ssb_set_devtypedata(dev, wl); |
| b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n", |
| dev->bus->chip_id, dev->id.revision); |
| err = 0; |
| out: |
| return err; |
| } |
| |
| static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) |
| { |
| struct b43_wl *wl; |
| int err; |
| int first = 0; |
| |
| wl = ssb_get_devtypedata(dev); |
| if (!wl) { |
| /* Probing the first core. Must setup common struct b43_wl */ |
| first = 1; |
| err = b43_wireless_init(dev); |
| if (err) |
| goto out; |
| wl = ssb_get_devtypedata(dev); |
| B43_WARN_ON(!wl); |
| } |
| err = b43_one_core_attach(dev, wl); |
| if (err) |
| goto err_wireless_exit; |
| |
| if (first) { |
| err = ieee80211_register_hw(wl->hw); |
| if (err) |
| goto err_one_core_detach; |
| } |
| |
| out: |
| return err; |
| |
| err_one_core_detach: |
| b43_one_core_detach(dev); |
| err_wireless_exit: |
| if (first) |
| b43_wireless_exit(dev, wl); |
| return err; |
| } |
| |
| static void b43_remove(struct ssb_device *dev) |
| { |
| struct b43_wl *wl = ssb_get_devtypedata(dev); |
| struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| |
| /* We must cancel any work here before unregistering from ieee80211, |
| * as the ieee80211 unreg will destroy the workqueue. */ |
| cancel_work_sync(&wldev->restart_work); |
| |
| B43_WARN_ON(!wl); |
| if (wl->current_dev == wldev) |
| ieee80211_unregister_hw(wl->hw); |
| |
| b43_one_core_detach(dev); |
| |
| if (list_empty(&wl->devlist)) { |
| /* Last core on the chip unregistered. |
| * We can destroy common struct b43_wl. |
| */ |
| b43_wireless_exit(dev, wl); |
| } |
| } |
| |
| /* Perform a hardware reset. This can be called from any context. */ |
| void b43_controller_restart(struct b43_wldev *dev, const char *reason) |
| { |
| /* Must avoid requeueing, if we are in shutdown. */ |
| if (b43_status(dev) < B43_STAT_INITIALIZED) |
| return; |
| b43info(dev->wl, "Controller RESET (%s) ...\n", reason); |
| queue_work(dev->wl->hw->workqueue, &dev->restart_work); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int b43_suspend(struct ssb_device *dev, pm_message_t state) |
| { |
| struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| struct b43_wl *wl = wldev->wl; |
| |
| b43dbg(wl, "Suspending...\n"); |
| |
| mutex_lock(&wl->mutex); |
| wldev->suspend_in_progress = true; |
| wldev->suspend_init_status = b43_status(wldev); |
| if (wldev->suspend_init_status >= B43_STAT_STARTED) |
| b43_wireless_core_stop(wldev); |
| if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) |
| b43_wireless_core_exit(wldev); |
| mutex_unlock(&wl->mutex); |
| |
| b43dbg(wl, "Device suspended.\n"); |
| |
| return 0; |
| } |
| |
| static int b43_resume(struct ssb_device *dev) |
| { |
| struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| struct b43_wl *wl = wldev->wl; |
| int err = 0; |
| |
| b43dbg(wl, "Resuming...\n"); |
| |
| mutex_lock(&wl->mutex); |
| if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { |
| err = b43_wireless_core_init(wldev); |
| if (err) { |
| b43err(wl, "Resume failed at core init\n"); |
| goto out; |
| } |
| } |
| if (wldev->suspend_init_status >= B43_STAT_STARTED) { |
| err = b43_wireless_core_start(wldev); |
| if (err) { |
| b43_leds_exit(wldev); |
| b43_rng_exit(wldev->wl); |
| b43_wireless_core_exit(wldev); |
| b43err(wl, "Resume failed at core start\n"); |
| goto out; |
| } |
| } |
| b43dbg(wl, "Device resumed.\n"); |
| out: |
| wldev->suspend_in_progress = false; |
| mutex_unlock(&wl->mutex); |
| return err; |
| } |
| |
| #else /* CONFIG_PM */ |
| # define b43_suspend NULL |
| # define b43_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static struct ssb_driver b43_ssb_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = b43_ssb_tbl, |
| .probe = b43_probe, |
| .remove = b43_remove, |
| .suspend = b43_suspend, |
| .resume = b43_resume, |
| }; |
| |
| static void b43_print_driverinfo(void) |
| { |
| const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", |
| *feat_leds = "", *feat_rfkill = ""; |
| |
| #ifdef CONFIG_B43_PCI_AUTOSELECT |
| feat_pci = "P"; |
| #endif |
| #ifdef CONFIG_B43_PCMCIA |
| feat_pcmcia = "M"; |
| #endif |
| #ifdef CONFIG_B43_NPHY |
| feat_nphy = "N"; |
| #endif |
| #ifdef CONFIG_B43_LEDS |
| feat_leds = "L"; |
| #endif |
| #ifdef CONFIG_B43_RFKILL |
| feat_rfkill = "R"; |
| #endif |
| printk(KERN_INFO "Broadcom 43xx driver loaded " |
| "[ Features: %s%s%s%s%s, Firmware-ID: " |
| B43_SUPPORTED_FIRMWARE_ID " ]\n", |
| feat_pci, feat_pcmcia, feat_nphy, |
| feat_leds, feat_rfkill); |
| } |
| |
| static int __init b43_init(void) |
| { |
| int err; |
| |
| b43_debugfs_init(); |
| err = b43_pcmcia_init(); |
| if (err) |
| goto err_dfs_exit; |
| err = ssb_driver_register(&b43_ssb_driver); |
| if (err) |
| goto err_pcmcia_exit; |
| b43_print_driverinfo(); |
| |
| return err; |
| |
| err_pcmcia_exit: |
| b43_pcmcia_exit(); |
| err_dfs_exit: |
| b43_debugfs_exit(); |
| return err; |
| } |
| |
| static void __exit b43_exit(void) |
| { |
| ssb_driver_unregister(&b43_ssb_driver); |
| b43_pcmcia_exit(); |
| b43_debugfs_exit(); |
| } |
| |
| module_init(b43_init) |
| module_exit(b43_exit) |