| |
| /* |
| * File: include/asm-blackfin/mach-bf561/defBF561.h |
| * Based on: |
| * Author: |
| * |
| * Created: |
| * Description: |
| * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 |
| * Rev: |
| * |
| * Modified: |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. |
| * If not, write to the Free Software Foundation, |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #ifndef _DEF_BF561_H |
| #define _DEF_BF561_H |
| /* |
| #if !defined(__ADSPBF561__) |
| #warning defBF561.h should only be included for BF561 chip. |
| #endif |
| */ |
| /* include all Core registers and bit definitions */ |
| #include <asm/def_LPBlackfin.h> |
| |
| /*********************************************************************************** */ |
| /* System MMR Register Map */ |
| /*********************************************************************************** */ |
| |
| /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ |
| |
| #define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ |
| #define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ |
| #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ |
| #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ |
| #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ |
| #define CHIPID 0xFFC00014 /* Chip ID Register */ |
| |
| /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ |
| #define SWRST SICA_SWRST |
| #define SYSCR SICA_SYSCR |
| #define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A) |
| #define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A) |
| #define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A) |
| #define RESET_SOFTWARE (SWRST_OCCURRED) |
| |
| /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ |
| #define SICA_SWRST 0xFFC00100 /* Software Reset register */ |
| #define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ |
| #define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ |
| #define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ |
| #define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ |
| #define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ |
| #define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ |
| #define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ |
| #define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ |
| #define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ |
| #define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ |
| #define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ |
| #define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ |
| #define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ |
| #define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ |
| #define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ |
| #define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ |
| #define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ |
| |
| /* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ |
| #define SICB_SWRST 0xFFC01100 /* reserved */ |
| #define SICB_SYSCR 0xFFC01104 /* reserved */ |
| #define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ |
| #define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ |
| #define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ |
| #define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ |
| #define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ |
| #define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ |
| #define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ |
| #define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ |
| #define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ |
| #define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ |
| #define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ |
| #define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ |
| #define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ |
| #define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ |
| #define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ |
| |
| /* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ |
| #define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ |
| #define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ |
| #define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ |
| |
| /* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ |
| #define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ |
| #define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ |
| #define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ |
| |
| /* UART Controller (0xFFC00400 - 0xFFC004FF) */ |
| |
| /* |
| * Because include/linux/serial_reg.h have defined UART_*, |
| * So we define blackfin uart regs to BFIN_UART0_*. |
| */ |
| #define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ |
| #define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ |
| #define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ |
| #define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ |
| #define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ |
| #define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ |
| #define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ |
| #define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ |
| #define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ |
| #define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */ |
| #define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ |
| #define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ |
| |
| /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ |
| #define SPI0_REGBASE 0xFFC00500 |
| #define SPI_CTL 0xFFC00500 /* SPI Control Register */ |
| #define SPI_FLG 0xFFC00504 /* SPI Flag register */ |
| #define SPI_STAT 0xFFC00508 /* SPI Status register */ |
| #define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ |
| #define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ |
| #define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ |
| #define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ |
| |
| /* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ |
| #define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ |
| #define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ |
| #define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ |
| #define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ |
| |
| #define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ |
| #define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ |
| #define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ |
| #define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ |
| |
| #define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ |
| #define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ |
| #define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ |
| #define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ |
| |
| #define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ |
| #define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ |
| #define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ |
| #define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ |
| |
| #define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ |
| #define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ |
| #define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ |
| #define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ |
| |
| #define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ |
| #define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ |
| #define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ |
| #define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ |
| |
| #define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ |
| #define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ |
| #define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ |
| #define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ |
| |
| #define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ |
| #define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ |
| #define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ |
| #define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ |
| |
| #define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ |
| #define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ |
| #define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ |
| |
| /* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ |
| #define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ |
| #define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ |
| #define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ |
| #define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ |
| |
| #define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ |
| #define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ |
| #define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ |
| #define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ |
| |
| #define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ |
| #define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ |
| #define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ |
| #define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ |
| |
| #define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ |
| #define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ |
| #define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ |
| #define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ |
| |
| #define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ |
| #define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ |
| #define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ |
| |
| /* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ |
| #define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ |
| #define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ |
| #define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ |
| #define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ |
| #define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ |
| #define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ |
| #define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ |
| #define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ |
| #define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ |
| #define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ |
| #define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ |
| #define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ |
| #define FIO0_DIR 0xFFC00730 /* Flag Direction register */ |
| #define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ |
| #define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ |
| #define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ |
| #define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ |
| |
| /* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ |
| #define FIO1_FLAG_D 0xFFC01500 /* Flag Data register (mask used to directly */ |
| #define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ |
| #define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ |
| #define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register (mask used to */ |
| #define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ |
| #define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ |
| #define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ |
| #define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ |
| #define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ |
| #define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ |
| #define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ |
| #define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ |
| #define FIO1_DIR 0xFFC01530 /* Flag Direction register */ |
| #define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ |
| #define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ |
| #define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ |
| #define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ |
| |
| /* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ |
| #define FIO2_FLAG_D 0xFFC01700 /* Flag Data register (mask used to directly */ |
| #define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ |
| #define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ |
| #define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register (mask used to */ |
| #define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ |
| #define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ |
| #define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ |
| #define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ |
| #define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ |
| #define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ |
| #define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ |
| #define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ |
| #define FIO2_DIR 0xFFC01730 /* Flag Direction register */ |
| #define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ |
| #define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ |
| #define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ |
| #define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ |
| |
| /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ |
| #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ |
| #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ |
| #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ |
| #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ |
| #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ |
| #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ |
| #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ |
| #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ |
| #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ |
| #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ |
| #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ |
| #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ |
| #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ |
| #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ |
| #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ |
| #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ |
| #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ |
| #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ |
| #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ |
| #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ |
| #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ |
| #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ |
| |
| /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ |
| #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ |
| #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ |
| #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ |
| #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ |
| #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ |
| #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ |
| #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ |
| #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ |
| #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ |
| #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ |
| #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ |
| #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ |
| #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ |
| #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ |
| #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ |
| #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ |
| #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ |
| #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ |
| #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ |
| #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ |
| #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ |
| #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ |
| |
| /* Asynchronous Memory Controller - External Bus Interface Unit */ |
| #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ |
| #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ |
| #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ |
| |
| /* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ |
| #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ |
| #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ |
| #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ |
| #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ |
| |
| /* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ |
| #define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ |
| #define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ |
| #define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ |
| #define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ |
| #define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ |
| |
| /*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ |
| #define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ |
| #define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ |
| #define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ |
| #define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ |
| #define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ |
| |
| /*DMA traffic control registers */ |
| #define DMA1_TC_PER 0xFFC01B0C /* Traffic control periods */ |
| #define DMA1_TC_CNT 0xFFC01B10 /* Traffic control current counts */ |
| #define DMA2_TC_PER 0xFFC00B0C /* Traffic control periods */ |
| #define DMA2_TC_CNT 0xFFC00B10 /* Traffic control current counts */ |
| |
| /* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ |
| #define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ |
| #define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ |
| #define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ |
| #define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ |
| #define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ |
| #define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ |
| #define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ |
| #define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ |
| #define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ |
| #define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ |
| #define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ |
| #define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */ |
| #define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ |
| |
| #define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ |
| #define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ |
| #define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ |
| #define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ |
| #define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ |
| #define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ |
| #define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ |
| #define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ |
| #define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ |
| #define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ |
| #define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ |
| #define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */ |
| #define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ |
| |
| #define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ |
| #define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ |
| #define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ |
| #define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ |
| #define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ |
| #define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ |
| #define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ |
| #define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ |
| #define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ |
| #define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ |
| #define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ |
| #define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */ |
| #define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ |
| |
| #define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ |
| #define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ |
| #define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ |
| #define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ |
| #define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ |
| #define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ |
| #define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ |
| #define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ |
| #define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ |
| #define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ |
| #define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ |
| #define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */ |
| #define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ |
| |
| #define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ |
| #define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ |
| #define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ |
| #define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ |
| #define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ |
| #define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ |
| #define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ |
| #define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ |
| #define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ |
| #define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ |
| #define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ |
| #define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */ |
| #define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ |
| |
| #define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ |
| #define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ |
| #define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ |
| #define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ |
| #define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ |
| #define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ |
| #define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ |
| #define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ |
| #define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ |
| #define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ |
| #define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ |
| #define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */ |
| #define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ |
| |
| #define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ |
| #define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ |
| #define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ |
| #define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ |
| #define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ |
| #define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ |
| #define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ |
| #define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ |
| #define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ |
| #define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ |
| #define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ |
| #define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */ |
| #define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ |
| |
| #define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ |
| #define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ |
| #define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ |
| #define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ |
| #define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ |
| #define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ |
| #define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ |
| #define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ |
| #define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ |
| #define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ |
| #define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ |
| #define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */ |
| #define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ |
| |
| #define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ |
| #define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ |
| #define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ |
| #define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ |
| #define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ |
| #define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ |
| #define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ |
| #define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ |
| #define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ |
| #define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ |
| #define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ |
| #define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */ |
| #define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ |
| |
| #define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ |
| #define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ |
| #define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ |
| #define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ |
| #define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ |
| #define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ |
| #define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ |
| #define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ |
| #define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ |
| #define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ |
| #define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ |
| #define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */ |
| #define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ |
| |
| #define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ |
| #define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ |
| #define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ |
| #define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ |
| #define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ |
| #define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ |
| #define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ |
| #define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ |
| #define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ |
| #define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ |
| #define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ |
| #define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */ |
| #define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ |
| |
| #define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ |
| #define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ |
| #define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ |
| #define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ |
| #define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ |
| #define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ |
| #define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ |
| #define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ |
| #define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ |
| #define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ |
| #define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ |
| #define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */ |
| #define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ |
| |
| /* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ |
| #define MDMA1_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */ |
| #define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ |
| #define MDMA1_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */ |
| #define MDMA1_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */ |
| #define MDMA1_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */ |
| #define MDMA1_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ |
| #define MDMA1_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ |
| #define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ |
| #define MDMA1_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */ |
| #define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */ |
| #define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */ |
| #define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */ |
| #define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */ |
| |
| #define MDMA1_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */ |
| #define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ |
| #define MDMA1_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */ |
| #define MDMA1_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */ |
| #define MDMA1_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */ |
| #define MDMA1_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ |
| #define MDMA1_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ |
| #define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ |
| #define MDMA1_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */ |
| #define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */ |
| #define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */ |
| #define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */ |
| #define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */ |
| |
| #define MDMA1_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */ |
| #define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ |
| #define MDMA1_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */ |
| #define MDMA1_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */ |
| #define MDMA1_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */ |
| #define MDMA1_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ |
| #define MDMA1_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ |
| #define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ |
| #define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */ |
| #define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */ |
| #define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */ |
| #define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */ |
| #define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */ |
| |
| #define MDMA1_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */ |
| #define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ |
| #define MDMA1_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */ |
| #define MDMA1_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */ |
| #define MDMA1_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */ |
| #define MDMA1_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ |
| #define MDMA1_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ |
| #define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ |
| #define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */ |
| #define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */ |
| #define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */ |
| #define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */ |
| #define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */ |
| |
| /* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ |
| #define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ |
| #define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ |
| #define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ |
| #define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ |
| #define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ |
| #define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ |
| #define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ |
| #define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ |
| #define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ |
| #define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ |
| #define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ |
| #define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */ |
| #define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ |
| |
| #define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ |
| #define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ |
| #define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ |
| #define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ |
| #define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ |
| #define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ |
| #define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ |
| #define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ |
| #define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ |
| #define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ |
| #define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ |
| #define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */ |
| #define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ |
| |
| #define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ |
| #define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ |
| #define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ |
| #define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ |
| #define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ |
| #define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ |
| #define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ |
| #define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ |
| #define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ |
| #define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ |
| #define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ |
| #define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */ |
| #define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ |
| |
| #define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ |
| #define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ |
| #define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ |
| #define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ |
| #define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ |
| #define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ |
| #define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ |
| #define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ |
| #define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ |
| #define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ |
| #define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ |
| #define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */ |
| #define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ |
| |
| #define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ |
| #define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ |
| #define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ |
| #define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ |
| #define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ |
| #define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ |
| #define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ |
| #define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ |
| #define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ |
| #define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ |
| #define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ |
| #define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */ |
| #define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ |
| |
| #define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ |
| #define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ |
| #define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ |
| #define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ |
| #define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ |
| #define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ |
| #define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ |
| #define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ |
| #define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ |
| #define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ |
| #define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ |
| #define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */ |
| #define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ |
| |
| #define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ |
| #define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ |
| #define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ |
| #define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ |
| #define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ |
| #define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ |
| #define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ |
| #define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ |
| #define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ |
| #define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ |
| #define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ |
| #define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */ |
| #define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ |
| |
| #define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ |
| #define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ |
| #define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ |
| #define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ |
| #define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ |
| #define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ |
| #define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ |
| #define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ |
| #define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ |
| #define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ |
| #define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ |
| #define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */ |
| #define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ |
| |
| #define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ |
| #define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ |
| #define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ |
| #define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ |
| #define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ |
| #define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ |
| #define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ |
| #define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ |
| #define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ |
| #define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ |
| #define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ |
| #define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */ |
| #define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ |
| |
| #define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ |
| #define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ |
| #define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ |
| #define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ |
| #define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ |
| #define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ |
| #define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ |
| #define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ |
| #define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ |
| #define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ |
| #define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ |
| #define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */ |
| #define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ |
| |
| #define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ |
| #define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ |
| #define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ |
| #define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ |
| #define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ |
| #define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ |
| #define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ |
| #define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ |
| #define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ |
| #define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ |
| #define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ |
| #define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */ |
| #define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ |
| |
| #define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ |
| #define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ |
| #define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ |
| #define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ |
| #define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ |
| #define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ |
| #define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ |
| #define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ |
| #define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ |
| #define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ |
| #define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ |
| #define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */ |
| #define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ |
| |
| /* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ |
| #define MDMA2_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */ |
| #define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ |
| #define MDMA2_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */ |
| #define MDMA2_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */ |
| #define MDMA2_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */ |
| #define MDMA2_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ |
| #define MDMA2_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ |
| #define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ |
| #define MDMA2_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */ |
| #define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ |
| #define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ |
| #define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */ |
| #define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */ |
| |
| #define MDMA2_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */ |
| #define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ |
| #define MDMA2_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */ |
| #define MDMA2_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */ |
| #define MDMA2_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */ |
| #define MDMA2_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ |
| #define MDMA2_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ |
| #define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ |
| #define MDMA2_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */ |
| #define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ |
| #define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ |
| #define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */ |
| #define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */ |
| |
| #define MDMA2_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */ |
| #define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ |
| #define MDMA2_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */ |
| #define MDMA2_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */ |
| #define MDMA2_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */ |
| #define MDMA2_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ |
| #define MDMA2_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ |
| #define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */ |
| #define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */ |
| #define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ |
| #define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ |
| #define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */ |
| #define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */ |
| |
| #define MDMA2_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */ |
| #define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ |
| #define MDMA2_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */ |
| #define MDMA2_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */ |
| #define MDMA2_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */ |
| #define MDMA2_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ |
| #define MDMA2_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ |
| #define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ |
| #define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */ |
| #define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */ |
| #define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */ |
| #define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ |
| #define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ |
| |
| #define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR |
| #define MDMA_D0_START_ADDR MDMA1_D0_START_ADDR |
| #define MDMA_D0_CONFIG MDMA1_D0_CONFIG |
| #define MDMA_D0_X_COUNT MDMA1_D0_X_COUNT |
| #define MDMA_D0_X_MODIFY MDMA1_D0_X_MODIFY |
| #define MDMA_D0_Y_COUNT MDMA1_D0_Y_COUNT |
| #define MDMA_D0_Y_MODIFY MDMA1_D0_Y_MODIFY |
| #define MDMA_D0_CURR_DESC_PTR MDMA1_D0_CURR_DESC_PTR |
| #define MDMA_D0_CURR_ADDR MDMA1_D0_CURR_ADDR |
| #define MDMA_D0_IRQ_STATUS MDMA1_D0_IRQ_STATUS |
| #define MDMA_D0_PERIPHERAL_MAP MDMA1_D0_PERIPHERAL_MAP |
| #define MDMA_D0_CURR_X_COUNT MDMA1_D0_CURR_X_COUNT |
| #define MDMA_D0_CURR_Y_COUNT MDMA1_D0_CURR_Y_COUNT |
| |
| #define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR |
| #define MDMA_S0_START_ADDR MDMA1_S0_START_ADDR |
| #define MDMA_S0_CONFIG MDMA1_S0_CONFIG |
| #define MDMA_S0_X_COUNT MDMA1_S0_X_COUNT |
| #define MDMA_S0_X_MODIFY MDMA1_S0_X_MODIFY |
| #define MDMA_S0_Y_COUNT MDMA1_S0_Y_COUNT |
| #define MDMA_S0_Y_MODIFY MDMA1_S0_Y_MODIFY |
| #define MDMA_S0_CURR_DESC_PTR MDMA1_S0_CURR_DESC_PTR |
| #define MDMA_S0_CURR_ADDR MDMA1_S0_CURR_ADDR |
| #define MDMA_S0_IRQ_STATUS MDMA1_S0_IRQ_STATUS |
| #define MDMA_S0_PERIPHERAL_MAP MDMA1_S0_PERIPHERAL_MAP |
| #define MDMA_S0_CURR_X_COUNT MDMA1_S0_CURR_X_COUNT |
| #define MDMA_S0_CURR_Y_COUNT MDMA1_S0_CURR_Y_COUNT |
| |
| #define MDMA_D1_NEXT_DESC_PTR MDMA1_D1_NEXT_DESC_PTR |
| #define MDMA_D1_START_ADDR MDMA1_D1_START_ADDR |
| #define MDMA_D1_CONFIG MDMA1_D1_CONFIG |
| #define MDMA_D1_X_COUNT MDMA1_D1_X_COUNT |
| #define MDMA_D1_X_MODIFY MDMA1_D1_X_MODIFY |
| #define MDMA_D1_Y_COUNT MDMA1_D1_Y_COUNT |
| #define MDMA_D1_Y_MODIFY MDMA1_D1_Y_MODIFY |
| #define MDMA_D1_CURR_DESC_PTR MDMA1_D1_CURR_DESC_PTR |
| #define MDMA_D1_CURR_ADDR MDMA1_D1_CURR_ADDR |
| #define MDMA_D1_IRQ_STATUS MDMA1_D1_IRQ_STATUS |
| #define MDMA_D1_PERIPHERAL_MAP MDMA1_D1_PERIPHERAL_MAP |
| #define MDMA_D1_CURR_X_COUNT MDMA1_D1_CURR_X_COUNT |
| #define MDMA_D1_CURR_Y_COUNT MDMA1_D1_CURR_Y_COUNT |
| |
| #define MDMA_S1_NEXT_DESC_PTR MDMA1_S1_NEXT_DESC_PTR |
| #define MDMA_S1_START_ADDR MDMA1_S1_START_ADDR |
| #define MDMA_S1_CONFIG MDMA1_S1_CONFIG |
| #define MDMA_S1_X_COUNT MDMA1_S1_X_COUNT |
| #define MDMA_S1_X_MODIFY MDMA1_S1_X_MODIFY |
| #define MDMA_S1_Y_COUNT MDMA1_S1_Y_COUNT |
| #define MDMA_S1_Y_MODIFY MDMA1_S1_Y_MODIFY |
| #define MDMA_S1_CURR_DESC_PTR MDMA1_S1_CURR_DESC_PTR |
| #define MDMA_S1_CURR_ADDR MDMA1_S1_CURR_ADDR |
| #define MDMA_S1_IRQ_STATUS MDMA1_S1_IRQ_STATUS |
| #define MDMA_S1_PERIPHERAL_MAP MDMA1_S1_PERIPHERAL_MAP |
| #define MDMA_S1_CURR_X_COUNT MDMA1_S1_CURR_X_COUNT |
| #define MDMA_S1_CURR_Y_COUNT MDMA1_S1_CURR_Y_COUNT |
| |
| /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ |
| #define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */ |
| #define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ |
| #define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */ |
| #define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */ |
| #define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */ |
| #define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */ |
| #define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */ |
| #define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */ |
| #define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */ |
| #define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */ |
| #define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */ |
| #define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */ |
| |
| #define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */ |
| #define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */ |
| #define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */ |
| #define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */ |
| #define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */ |
| #define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */ |
| #define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */ |
| #define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */ |
| #define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */ |
| #define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */ |
| #define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */ |
| #define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */ |
| |
| #define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */ |
| #define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ |
| #define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */ |
| #define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */ |
| #define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */ |
| #define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */ |
| #define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */ |
| #define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */ |
| #define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */ |
| #define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */ |
| #define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */ |
| #define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */ |
| |
| #define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */ |
| #define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */ |
| #define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */ |
| #define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */ |
| #define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */ |
| #define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */ |
| #define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */ |
| #define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */ |
| #define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */ |
| #define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */ |
| #define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */ |
| #define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */ |
| |
| /*********************************************************************************** */ |
| /* System MMR Register Bits */ |
| /******************************************************************************* */ |
| |
| /* ********************* PLL AND RESET MASKS ************************ */ |
| |
| /* PLL_CTL Masks */ |
| #define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ |
| #define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ |
| #define PLL_OFF 0x00000002 /* Shut off PLL clocks */ |
| #define STOPCK_OFF 0x00000008 /* Core clock off */ |
| #define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ |
| #define BYPASS 0x00000100 /* Bypass the PLL */ |
| |
| /* CHIPID Masks */ |
| #define CHIPID_VERSION 0xF0000000 |
| #define CHIPID_FAMILY 0x0FFFF000 |
| #define CHIPID_MANUFACTURE 0x00000FFE |
| |
| /* VR_CTL Masks */ |
| #define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ |
| #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ |
| #define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ |
| #define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ |
| #define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ |
| |
| #define GAIN 0x000C /* Voltage Level Gain */ |
| #define GAIN_5 0x0000 /* GAIN = 5*/ |
| #define GAIN_10 0x0004 /* GAIN = 1*/ |
| #define GAIN_20 0x0008 /* GAIN = 2*/ |
| #define GAIN_50 0x000C /* GAIN = 5*/ |
| |
| #define VLEV 0x00F0 /* Internal Voltage Level */ |
| #define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ |
| #define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ |
| #define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ |
| #define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ |
| #define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ |
| #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ |
| #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ |
| #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ |
| #define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ |
| #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ |
| |
| #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ |
| #define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ |
| |
| /* PLL_DIV Masks */ |
| #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ |
| |
| #define CSEL 0x30 /* Core Select */ |
| #define SSEL 0xf /* System Select */ |
| #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ |
| #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ |
| #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ |
| #define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ |
| |
| /* PLL_STAT Masks */ |
| #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ |
| #define FULL_ON 0x0002 /* Processor In Full On Mode */ |
| #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ |
| #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ |
| |
| /* SICA_SYSCR Masks */ |
| #define COREB_SRAM_INIT 0x0020 |
| |
| /* SWRST Mask */ |
| #define SYSTEM_RESET 0x0007 /* Initiates a system software reset */ |
| #define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */ |
| #define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */ |
| #define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */ |
| #define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */ |
| #define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */ |
| #define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */ |
| #define SWRST_OCCURRED 0x8000 /* SWRST Status */ |
| |
| /* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ |
| |
| /* SICu_IARv Masks */ |
| /* u = A or B */ |
| /* v = 0 to 7 */ |
| /* w = 0 or 1 */ |
| |
| /* Per_number = 0 to 63 */ |
| /* IVG_number = 7 to 15 */ |
| #define Peripheral_IVG(Per_number, IVG_number) \ |
| ((IVG_number) - 7) << (((Per_number) % 8) * 4) /* Peripheral #Per_number assigned IVG #IVG_number */ |
| /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */ |
| /* r0.h = hi(Peripheral_IVG(62, 10)); */ |
| |
| /* SICx_IMASKw Masks */ |
| /* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ |
| #define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ |
| #define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ |
| #define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ |
| #define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ |
| |
| /* SIC_IWR Masks */ |
| #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ |
| #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ |
| /* x = pos 0 to 31, for 32-63 use value-32 */ |
| #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ |
| #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ |
| |
| /* ***************************** UART CONTROLLER MASKS ********************** */ |
| |
| /* UART_LCR Register */ |
| |
| #define DLAB 0x80 |
| #define SB 0x40 |
| #define STP 0x20 |
| #define EPS 0x10 |
| #define PEN 0x08 |
| #define STB 0x04 |
| #define WLS(x) ((x-5) & 0x03) |
| |
| #define DLAB_P 0x07 |
| #define SB_P 0x06 |
| #define STP_P 0x05 |
| #define EPS_P 0x04 |
| #define PEN_P 0x03 |
| #define STB_P 0x02 |
| #define WLS_P1 0x01 |
| #define WLS_P0 0x00 |
| |
| /* UART_MCR Register */ |
| #define LOOP_ENA 0x10 |
| #define LOOP_ENA_P 0x04 |
| |
| /* UART_LSR Register */ |
| #define TEMT 0x40 |
| #define THRE 0x20 |
| #define BI 0x10 |
| #define FE 0x08 |
| #define PE 0x04 |
| #define OE 0x02 |
| #define DR 0x01 |
| |
| #define TEMP_P 0x06 |
| #define THRE_P 0x05 |
| #define BI_P 0x04 |
| #define FE_P 0x03 |
| #define PE_P 0x02 |
| #define OE_P 0x01 |
| #define DR_P 0x00 |
| |
| /* UART_IER Register */ |
| #define ELSI 0x04 |
| #define ETBEI 0x02 |
| #define ERBFI 0x01 |
| |
| #define ELSI_P 0x02 |
| #define ETBEI_P 0x01 |
| #define ERBFI_P 0x00 |
| |
| /* UART_IIR Register */ |
| #define STATUS(x) ((x << 1) & 0x06) |
| #define NINT 0x01 |
| #define STATUS_P1 0x02 |
| #define STATUS_P0 0x01 |
| #define NINT_P 0x00 |
| #define IIR_TX_READY 0x02 /* UART_THR empty */ |
| #define IIR_RX_READY 0x04 /* Receive data ready */ |
| #define IIR_LINE_CHANGE 0x06 /* Receive line status */ |
| #define IIR_STATUS 0x06 |
| |
| /* UART_GCTL Register */ |
| #define FFE 0x20 |
| #define FPE 0x10 |
| #define RPOLC 0x08 |
| #define TPOLC 0x04 |
| #define IREN 0x02 |
| #define UCEN 0x01 |
| |
| #define FFE_P 0x05 |
| #define FPE_P 0x04 |
| #define RPOLC_P 0x03 |
| #define TPOLC_P 0x02 |
| #define IREN_P 0x01 |
| #define UCEN_P 0x00 |
| |
| /* ********** SERIAL PORT MASKS ********************** */ |
| |
| /* SPORTx_TCR1 Masks */ |
| #define TSPEN 0x0001 /* TX enable */ |
| #define ITCLK 0x0002 /* Internal TX Clock Select */ |
| #define TDTYPE 0x000C /* TX Data Formatting Select */ |
| #define TLSBIT 0x0010 /* TX Bit Order */ |
| #define ITFS 0x0200 /* Internal TX Frame Sync Select */ |
| #define TFSR 0x0400 /* TX Frame Sync Required Select */ |
| #define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ |
| #define LTFS 0x1000 /* Low TX Frame Sync Select */ |
| #define LATFS 0x2000 /* Late TX Frame Sync Select */ |
| #define TCKFE 0x4000 /* TX Clock Falling Edge Select */ |
| |
| /* SPORTx_TCR2 Masks */ |
| #define SLEN 0x001F /*TX Word Length */ |
| #define TXSE 0x0100 /*TX Secondary Enable */ |
| #define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ |
| #define TRFST 0x0400 /*TX Right-First Data Order */ |
| |
| /* SPORTx_RCR1 Masks */ |
| #define RSPEN 0x0001 /* RX enable */ |
| #define IRCLK 0x0002 /* Internal RX Clock Select */ |
| #define RDTYPE 0x000C /* RX Data Formatting Select */ |
| #define RULAW 0x0008 /* u-Law enable */ |
| #define RALAW 0x000C /* A-Law enable */ |
| #define RLSBIT 0x0010 /* RX Bit Order */ |
| #define IRFS 0x0200 /* Internal RX Frame Sync Select */ |
| #define RFSR 0x0400 /* RX Frame Sync Required Select */ |
| #define LRFS 0x1000 /* Low RX Frame Sync Select */ |
| #define LARFS 0x2000 /* Late RX Frame Sync Select */ |
| #define RCKFE 0x4000 /* RX Clock Falling Edge Select */ |
| |
| /* SPORTx_RCR2 Masks */ |
| #define SLEN 0x001F /*RX Word Length */ |
| #define RXSE 0x0100 /*RX Secondary Enable */ |
| #define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ |
| #define RRFST 0x0400 /*Right-First Data Order */ |
| |
| /*SPORTx_STAT Masks */ |
| #define RXNE 0x0001 /*RX FIFO Not Empty Status */ |
| #define RUVF 0x0002 /*RX Underflow Status */ |
| #define ROVF 0x0004 /*RX Overflow Status */ |
| #define TXF 0x0008 /*TX FIFO Full Status */ |
| #define TUVF 0x0010 /*TX Underflow Status */ |
| #define TOVF 0x0020 /*TX Overflow Status */ |
| #define TXHRE 0x0040 /*TX Hold Register Empty */ |
| |
| /*SPORTx_MCMC1 Masks */ |
| #define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ |
| #define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ |
| |
| /*SPORTx_MCMC2 Masks */ |
| #define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ |
| #define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ |
| #define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ |
| #define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ |
| #define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ |
| #define MFD 0x0000F000 /*Multichannel Frame Delay */ |
| |
| /* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ |
| |
| /* PPI_CONTROL Masks */ |
| #define PORT_EN 0x00000001 /* PPI Port Enable */ |
| #define PORT_DIR 0x00000002 /* PPI Port Direction */ |
| #define XFR_TYPE 0x0000000C /* PPI Transfer Type */ |
| #define PORT_CFG 0x00000030 /* PPI Port Configuration */ |
| #define FLD_SEL 0x00000040 /* PPI Active Field Select */ |
| #define PACK_EN 0x00000080 /* PPI Packing Mode */ |
| #define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ |
| #define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ |
| #define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ |
| #define DLENGTH 0x00003800 /* PPI Data Length */ |
| #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ |
| #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ |
| #define POL 0x0000C000 /* PPI Signal Polarities */ |
| #define POLC 0x4000 /* PPI Clock Polarity */ |
| #define POLS 0x8000 /* PPI Frame Sync Polarity */ |
| |
| /* PPI_STATUS Masks */ |
| #define FLD 0x00000400 /* Field Indicator */ |
| #define FT_ERR 0x00000800 /* Frame Track Error */ |
| #define OVR 0x00001000 /* FIFO Overflow Error */ |
| #define UNDR 0x00002000 /* FIFO Underrun Error */ |
| #define ERR_DET 0x00004000 /* Error Detected Indicator */ |
| #define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ |
| |
| /* ********** DMA CONTROLLER MASKS *********************8 */ |
| |
| /* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ |
| #define DMAEN 0x00000001 /* Channel Enable */ |
| #define WNR 0x00000002 /* Channel Direction (W/R*) */ |
| #define WDSIZE_8 0x00000000 /* Word Size 8 bits */ |
| #define WDSIZE_16 0x00000004 /* Word Size 16 bits */ |
| #define WDSIZE_32 0x00000008 /* Word Size 32 bits */ |
| #define DMA2D 0x00000010 /* 2D/1D* Mode */ |
| #define RESTART 0x00000020 /* Restart */ |
| #define DI_SEL 0x00000040 /* Data Interrupt Select */ |
| #define DI_EN 0x00000080 /* Data Interrupt Enable */ |
| #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ |
| #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ |
| #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ |
| #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ |
| #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ |
| #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ |
| #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ |
| #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ |
| #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ |
| #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ |
| #define NDSIZE 0x00000900 /* Next Descriptor Size */ |
| #define DMAFLOW 0x00007000 /* Flow Control */ |
| #define DMAFLOW_STOP 0x0000 /* Stop Mode */ |
| #define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ |
| #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ |
| #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ |
| #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ |
| |
| #define DMAEN_P 0 /* Channel Enable */ |
| #define WNR_P 1 /* Channel Direction (W/R*) */ |
| #define DMA2D_P 4 /* 2D/1D* Mode */ |
| #define RESTART_P 5 /* Restart */ |
| #define DI_SEL_P 6 /* Data Interrupt Select */ |
| #define DI_EN_P 7 /* Data Interrupt Enable */ |
| |
| /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ |
| |
| #define DMA_DONE 0x00000001 /* DMA Done Indicator */ |
| #define DMA_ERR 0x00000002 /* DMA Error Indicator */ |
| #define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ |
| #define DMA_RUN 0x00000008 /* DMA Running Indicator */ |
| |
| #define DMA_DONE_P 0 /* DMA Done Indicator */ |
| #define DMA_ERR_P 1 /* DMA Error Indicator */ |
| #define DFETCH_P 2 /* Descriptor Fetch Indicator */ |
| #define DMA_RUN_P 3 /* DMA Running Indicator */ |
| |
| /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ |
| |
| #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ |
| #define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ |
| #define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ |
| #define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ |
| #define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ |
| #define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ |
| #define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ |
| #define PMAP 0x00007000 /* DMA Peripheral Map Field */ |
| |
| /* ************* GENERAL PURPOSE TIMER MASKS ******************** */ |
| |
| /* PWM Timer bit definitions */ |
| |
| /* TIMER_ENABLE Register */ |
| #define TIMEN0 0x0001 |
| #define TIMEN1 0x0002 |
| #define TIMEN2 0x0004 |
| #define TIMEN3 0x0008 |
| #define TIMEN4 0x0010 |
| #define TIMEN5 0x0020 |
| #define TIMEN6 0x0040 |
| #define TIMEN7 0x0080 |
| #define TIMEN8 0x0001 |
| #define TIMEN9 0x0002 |
| #define TIMEN10 0x0004 |
| #define TIMEN11 0x0008 |
| |
| #define TIMEN0_P 0x00 |
| #define TIMEN1_P 0x01 |
| #define TIMEN2_P 0x02 |
| #define TIMEN3_P 0x03 |
| #define TIMEN4_P 0x04 |
| #define TIMEN5_P 0x05 |
| #define TIMEN6_P 0x06 |
| #define TIMEN7_P 0x07 |
| #define TIMEN8_P 0x00 |
| #define TIMEN9_P 0x01 |
| #define TIMEN10_P 0x02 |
| #define TIMEN11_P 0x03 |
| |
| /* TIMER_DISABLE Register */ |
| #define TIMDIS0 0x0001 |
| #define TIMDIS1 0x0002 |
| #define TIMDIS2 0x0004 |
| #define TIMDIS3 0x0008 |
| #define TIMDIS4 0x0010 |
| #define TIMDIS5 0x0020 |
| #define TIMDIS6 0x0040 |
| #define TIMDIS7 0x0080 |
| #define TIMDIS8 0x0001 |
| #define TIMDIS9 0x0002 |
| #define TIMDIS10 0x0004 |
| #define TIMDIS11 0x0008 |
| |
| #define TIMDIS0_P 0x00 |
| #define TIMDIS1_P 0x01 |
| #define TIMDIS2_P 0x02 |
| #define TIMDIS3_P 0x03 |
| #define TIMDIS4_P 0x04 |
| #define TIMDIS5_P 0x05 |
| #define TIMDIS6_P 0x06 |
| #define TIMDIS7_P 0x07 |
| #define TIMDIS8_P 0x00 |
| #define TIMDIS9_P 0x01 |
| #define TIMDIS10_P 0x02 |
| #define TIMDIS11_P 0x03 |
| |
| /* TIMER_STATUS Register */ |
| #define TIMIL0 0x00000001 |
| #define TIMIL1 0x00000002 |
| #define TIMIL2 0x00000004 |
| #define TIMIL3 0x00000008 |
| #define TIMIL4 0x00010000 |
| #define TIMIL5 0x00020000 |
| #define TIMIL6 0x00040000 |
| #define TIMIL7 0x00080000 |
| #define TIMIL8 0x0001 |
| #define TIMIL9 0x0002 |
| #define TIMIL10 0x0004 |
| #define TIMIL11 0x0008 |
| #define TOVF_ERR0 0x00000010 |
| #define TOVF_ERR1 0x00000020 |
| #define TOVF_ERR2 0x00000040 |
| #define TOVF_ERR3 0x00000080 |
| #define TOVF_ERR4 0x00100000 |
| #define TOVF_ERR5 0x00200000 |
| #define TOVF_ERR6 0x00400000 |
| #define TOVF_ERR7 0x00800000 |
| #define TOVF_ERR8 0x0010 |
| #define TOVF_ERR9 0x0020 |
| #define TOVF_ERR10 0x0040 |
| #define TOVF_ERR11 0x0080 |
| #define TRUN0 0x00001000 |
| #define TRUN1 0x00002000 |
| #define TRUN2 0x00004000 |
| #define TRUN3 0x00008000 |
| #define TRUN4 0x10000000 |
| #define TRUN5 0x20000000 |
| #define TRUN6 0x40000000 |
| #define TRUN7 0x80000000 |
| #define TRUN8 0x1000 |
| #define TRUN9 0x2000 |
| #define TRUN10 0x4000 |
| #define TRUN11 0x8000 |
| |
| #define TIMIL0_P 0x00 |
| #define TIMIL1_P 0x01 |
| #define TIMIL2_P 0x02 |
| #define TIMIL3_P 0x03 |
| #define TIMIL4_P 0x10 |
| #define TIMIL5_P 0x11 |
| #define TIMIL6_P 0x12 |
| #define TIMIL7_P 0x13 |
| #define TIMIL8_P 0x00 |
| #define TIMIL9_P 0x01 |
| #define TIMIL10_P 0x02 |
| #define TIMIL11_P 0x03 |
| #define TOVF_ERR0_P 0x04 |
| #define TOVF_ERR1_P 0x05 |
| #define TOVF_ERR2_P 0x06 |
| #define TOVF_ERR3_P 0x07 |
| #define TOVF_ERR4_P 0x14 |
| #define TOVF_ERR5_P 0x15 |
| #define TOVF_ERR6_P 0x16 |
| #define TOVF_ERR7_P 0x17 |
| #define TOVF_ERR8_P 0x04 |
| #define TOVF_ERR9_P 0x05 |
| #define TOVF_ERR10_P 0x06 |
| #define TOVF_ERR11_P 0x07 |
| #define TRUN0_P 0x0C |
| #define TRUN1_P 0x0D |
| #define TRUN2_P 0x0E |
| #define TRUN3_P 0x0F |
| #define TRUN4_P 0x1C |
| #define TRUN5_P 0x1D |
| #define TRUN6_P 0x1E |
| #define TRUN7_P 0x1F |
| #define TRUN8_P 0x0C |
| #define TRUN9_P 0x0D |
| #define TRUN10_P 0x0E |
| #define TRUN11_P 0x0F |
| |
| /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ |
| #define TOVL_ERR0 TOVF_ERR0 |
| #define TOVL_ERR1 TOVF_ERR1 |
| #define TOVL_ERR2 TOVF_ERR2 |
| #define TOVL_ERR3 TOVF_ERR3 |
| #define TOVL_ERR4 TOVF_ERR4 |
| #define TOVL_ERR5 TOVF_ERR5 |
| #define TOVL_ERR6 TOVF_ERR6 |
| #define TOVL_ERR7 TOVF_ERR7 |
| #define TOVL_ERR8 TOVF_ERR8 |
| #define TOVL_ERR9 TOVF_ERR9 |
| #define TOVL_ERR10 TOVF_ERR10 |
| #define TOVL_ERR11 TOVF_ERR11 |
| #define TOVL_ERR0_P TOVF_ERR0_P |
| #define TOVL_ERR1_P TOVF_ERR1_P |
| #define TOVL_ERR2_P TOVF_ERR2_P |
| #define TOVL_ERR3_P TOVF_ERR3_P |
| #define TOVL_ERR4_P TOVF_ERR4_P |
| #define TOVL_ERR5_P TOVF_ERR5_P |
| #define TOVL_ERR6_P TOVF_ERR6_P |
| #define TOVL_ERR7_P TOVF_ERR7_P |
| #define TOVL_ERR8_P TOVF_ERR8_P |
| #define TOVL_ERR9_P TOVF_ERR9_P |
| #define TOVL_ERR10_P TOVF_ERR10_P |
| #define TOVL_ERR11_P TOVF_ERR11_P |
| |
| /* TIMERx_CONFIG Registers */ |
| #define PWM_OUT 0x0001 |
| #define WDTH_CAP 0x0002 |
| #define EXT_CLK 0x0003 |
| #define PULSE_HI 0x0004 |
| #define PERIOD_CNT 0x0008 |
| #define IRQ_ENA 0x0010 |
| #define TIN_SEL 0x0020 |
| #define OUT_DIS 0x0040 |
| #define CLK_SEL 0x0080 |
| #define TOGGLE_HI 0x0100 |
| #define EMU_RUN 0x0200 |
| #define ERR_TYP(x) ((x & 0x03) << 14) |
| |
| #define TMODE_P0 0x00 |
| #define TMODE_P1 0x01 |
| #define PULSE_HI_P 0x02 |
| #define PERIOD_CNT_P 0x03 |
| #define IRQ_ENA_P 0x04 |
| #define TIN_SEL_P 0x05 |
| #define OUT_DIS_P 0x06 |
| #define CLK_SEL_P 0x07 |
| #define TOGGLE_HI_P 0x08 |
| #define EMU_RUN_P 0x09 |
| #define ERR_TYP_P0 0x0E |
| #define ERR_TYP_P1 0x0F |
| |
| /*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ |
| |
| /* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ |
| #define PF0 0x0001 |
| #define PF1 0x0002 |
| #define PF2 0x0004 |
| #define PF3 0x0008 |
| #define PF4 0x0010 |
| #define PF5 0x0020 |
| #define PF6 0x0040 |
| #define PF7 0x0080 |
| #define PF8 0x0100 |
| #define PF9 0x0200 |
| #define PF10 0x0400 |
| #define PF11 0x0800 |
| #define PF12 0x1000 |
| #define PF13 0x2000 |
| #define PF14 0x4000 |
| #define PF15 0x8000 |
| |
| /* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ |
| #define PF0_P 0 |
| #define PF1_P 1 |
| #define PF2_P 2 |
| #define PF3_P 3 |
| #define PF4_P 4 |
| #define PF5_P 5 |
| #define PF6_P 6 |
| #define PF7_P 7 |
| #define PF8_P 8 |
| #define PF9_P 9 |
| #define PF10_P 10 |
| #define PF11_P 11 |
| #define PF12_P 12 |
| #define PF13_P 13 |
| #define PF14_P 14 |
| #define PF15_P 15 |
| |
| /* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ |
| |
| /* SPI_CTL Masks */ |
| #define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ |
| #define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ |
| #define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ |
| #define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ |
| #define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ |
| #define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ |
| #define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ |
| #define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ |
| #define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ |
| #define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ |
| #define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ |
| #define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ |
| |
| /* SPI_FLG Masks */ |
| #define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| #define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| |
| /* SPI_FLG Bit Positions */ |
| #define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| #define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| |
| /* SPI_STAT Masks */ |
| #define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ |
| #define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ |
| #define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ |
| #define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ |
| #define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ |
| #define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ |
| #define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ |
| |
| /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ |
| |
| /* AMGCTL Masks */ |
| #define AMCKEN 0x0001 /* Enable CLKOUT */ |
| #define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ |
| #define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ |
| #define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ |
| #define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ |
| #define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ |
| #define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ |
| #define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ |
| #define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ |
| |
| /* AMGCTL Bit Positions */ |
| #define AMCKEN_P 0x00000000 /* Enable CLKOUT */ |
| #define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ |
| #define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ |
| #define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ |
| #define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ |
| #define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ |
| #define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ |
| #define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ |
| |
| /* AMBCTL0 Masks */ |
| #define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ |
| #define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ |
| #define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ |
| #define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ |
| #define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ |
| #define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ |
| #define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ |
| #define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ |
| #define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ |
| #define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ |
| #define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ |
| #define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ |
| #define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ |
| #define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ |
| #define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ |
| #define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ |
| #define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ |
| #define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ |
| #define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ |
| #define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ |
| #define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ |
| #define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ |
| #define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ |
| #define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ |
| #define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ |
| #define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ |
| #define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ |
| #define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ |
| #define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ |
| #define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ |
| #define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ |
| #define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ |
| #define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ |
| #define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ |
| #define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ |
| #define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ |
| #define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ |
| #define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ |
| #define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ |
| #define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ |
| #define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ |
| #define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ |
| #define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ |
| #define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ |
| #define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ |
| #define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ |
| #define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ |
| #define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ |
| #define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ |
| #define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ |
| #define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ |
| #define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ |
| #define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ |
| #define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ |
| #define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ |
| #define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ |
| #define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ |
| #define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ |
| #define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ |
| #define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ |
| #define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ |
| #define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ |
| #define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ |
| #define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ |
| #define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ |
| #define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ |
| #define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ |
| #define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ |
| #define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ |
| #define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ |
| #define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ |
| #define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ |
| #define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ |
| #define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ |
| #define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ |
| #define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ |
| #define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ |
| #define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ |
| #define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ |
| #define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ |
| |
| /* AMBCTL1 Masks */ |
| #define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ |
| #define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ |
| #define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ |
| #define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ |
| #define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ |
| #define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ |
| #define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ |
| #define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ |
| #define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ |
| #define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ |
| #define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ |
| #define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ |
| #define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ |
| #define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ |
| #define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ |
| #define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ |
| #define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ |
| #define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ |
| #define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ |
| #define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ |
| #define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ |
| #define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ |
| #define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ |
| #define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ |
| #define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ |
| #define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ |
| #define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ |
| #define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ |
| #define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ |
| #define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ |
| #define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ |
| #define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ |
| #define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ |
| #define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ |
| #define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ |
| #define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ |
| #define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ |
| #define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ |
| #define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ |
| #define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ |
| #define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ |
| #define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ |
| #define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ |
| #define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ |
| #define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ |
| #define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ |
| #define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ |
| #define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ |
| #define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ |
| #define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ |
| #define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ |
| #define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ |
| #define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ |
| #define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ |
| #define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ |
| #define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ |
| #define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ |
| #define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ |
| #define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ |
| #define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ |
| #define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ |
| #define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ |
| #define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ |
| #define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ |
| #define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ |
| #define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ |
| #define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ |
| #define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ |
| #define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ |
| #define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ |
| #define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ |
| #define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ |
| |
| /* ********************** SDRAM CONTROLLER MASKS *************************** */ |
| |
| /* EBIU_SDGCTL Masks */ |
| #define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ |
| #define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ |
| #define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ |
| #define PFE 0x00000010 /* Enable SDRAM prefetch */ |
| #define PFP 0x00000020 /* Prefetch has priority over AMC requests */ |
| #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ |
| #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ |
| #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ |
| #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ |
| #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ |
| #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ |
| #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ |
| #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ |
| #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ |
| #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ |
| #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ |
| #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ |
| #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ |
| #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ |
| #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ |
| #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ |
| #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ |
| #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ |
| #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ |
| #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ |
| #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ |
| #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ |
| #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ |
| #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ |
| #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ |
| #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ |
| #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ |
| #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ |
| #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ |
| #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ |
| #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ |
| #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ |
| #define PUPSD 0x00200000 /*Power-up start delay */ |
| #define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ |
| #define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ |
| #define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ |
| #define EBUFE 0x02000000 /* Enable external buffering timing */ |
| #define FBBRW 0x04000000 /* Fast back-to-back read write enable */ |
| #define EMREN 0x10000000 /* Extended mode register enable */ |
| #define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ |
| #define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ |
| |
| /* EBIU_SDBCTL Masks */ |
| #define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ |
| #define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ |
| #define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ |
| #define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ |
| #define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ |
| #define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ |
| #define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ |
| #define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ |
| #define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ |
| |
| #define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ |
| #define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ |
| #define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ |
| #define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ |
| #define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ |
| #define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ |
| #define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ |
| |
| #define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ |
| #define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ |
| #define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ |
| #define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ |
| #define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ |
| #define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ |
| #define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ |
| |
| #define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ |
| #define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ |
| #define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ |
| #define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ |
| #define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ |
| #define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ |
| #define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ |
| #define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ |
| |
| /* EBIU_SDSTAT Masks */ |
| #define SDCI 0x00000001 /* SDRAM controller is idle */ |
| #define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ |
| #define SDPUA 0x00000004 /* SDRAM power up active */ |
| #define SDRS 0x00000008 /* SDRAM is in reset state */ |
| #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ |
| #define BGSTAT 0x00000020 /* Bus granted */ |
| |
| #endif /* _DEF_BF561_H */ |