drivers/net/wireless/rt2x00/rt2x00queue.c - kernel/msm-4.9 - Gitiles

 /*
 	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 	<http://rt2x00.serialmonkey.com>

 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
 	the Free Software Foundation; either version 2 of the License, or
 	(at your option) any later version.

 	This program is distributed in the hope that it will be useful,
 	but WITHOUT ANY WARRANTY; without even the implied warranty of
 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 	GNU General Public License for more details.

 	You should have received a copy of the GNU General Public License
 	along with this program; if not, write to the
 	Free Software Foundation, Inc.,
 	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */

 /*
 	Module: rt2x00lib
 	Abstract: rt2x00 queue specific routines.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>

 #include "rt2x00.h"
 #include "rt2x00lib.h"

 struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 					struct queue_entry *entry)
 {
 	struct sk_buff *skb;
 	struct skb_frame_desc *skbdesc;
 	unsigned int frame_size;
 	unsigned int head_size = 0;
 	unsigned int tail_size = 0;

 	/*
 	 * The frame size includes descriptor size, because the
 	 * hardware directly receive the frame into the skbuffer.
 	 */
 	frame_size = entry->queue->data_size + entry->queue->desc_size;

 	/*
 	 * The payload should be aligned to a 4-byte boundary,
 	 * this means we need at least 3 bytes for moving the frame
 	 * into the correct offset.
 	 */
 	head_size = 4;

 	/*
 	 * For IV/EIV/ICV assembly we must make sure there is
 	 * at least 8 bytes bytes available in headroom for IV/EIV
 	 * and 8 bytes for ICV data as tailroon.
 	 */
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
 		head_size += 8;
 		tail_size += 8;
 	}

 	/*
 	 * Allocate skbuffer.
 	 */
 	skb = dev_alloc_skb(frame_size + head_size + tail_size);
 	if (!skb)
 		return NULL;

 	/*
 	 * Make sure we not have a frame with the requested bytes
 	 * available in the head and tail.
 	 */
 	skb_reserve(skb, head_size);
 	skb_put(skb, frame_size);

 	/*
 	 * Populate skbdesc.
 	 */
 	skbdesc = get_skb_frame_desc(skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = entry;

 	if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) {
 		skbdesc->skb_dma = dma_map_single(rt2x00dev->dev,
 						  skb->data,
 						  skb->len,
 						  DMA_FROM_DEVICE);
 		skbdesc->flags |= SKBDESC_DMA_MAPPED_RX;
 	}

 	return skb;
 }

 void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

 	/*
 	 * If device has requested headroom, we should make sure that
 	 * is also mapped to the DMA so it can be used for transfering
 	 * additional descriptor information to the hardware.
 	 */
 	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);

 	skbdesc->skb_dma =
 	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);

 	/*
 	 * Restore data pointer to original location again.
 	 */
 	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);

 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
 EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);

 void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

 	if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) {
 		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
 				 DMA_FROM_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX;
 	}

 	if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
 		/*
 		 * Add headroom to the skb length, it has been removed
 		 * by the driver, but it was actually mapped to DMA.
 		 */
 		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
 				 skb->len + rt2x00dev->hw->extra_tx_headroom,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}
 }

 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
 	if (!skb)
 		return;

 	rt2x00queue_unmap_skb(rt2x00dev, skb);
 	dev_kfree_skb_any(skb);
 }

 static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
 						 struct txentry_desc *txdesc)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	unsigned long irqflags;

 	if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) ||
 	    unlikely(!tx_info->control.vif))
 		return;

 	/*
 	 * Hardware should insert sequence counter.
 	 * FIXME: We insert a software sequence counter first for
 	 * hardware that doesn't support hardware sequence counting.
 	 *
 	 * This is wrong because beacons are not getting sequence
 	 * numbers assigned properly.
 	 *
 	 * A secondary problem exists for drivers that cannot toggle
 	 * sequence counting per-frame, since those will override the
 	 * sequence counter given by mac80211.
 	 */
 	spin_lock_irqsave(&intf->seqlock, irqflags);

 	if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
 		intf->seqno += 0x10;
 	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
 	hdr->seq_ctrl |= cpu_to_le16(intf->seqno);

 	spin_unlock_irqrestore(&intf->seqlock, irqflags);

 	__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
 }

 static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
 						  struct txentry_desc *txdesc,
 						  const struct rt2x00_rate *hwrate)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
 	unsigned int data_length;
 	unsigned int duration;
 	unsigned int residual;

 	/* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */
 	data_length = entry->skb->len + 4;
 	data_length += rt2x00crypto_tx_overhead(rt2x00dev, entry->skb);

 	/*
 	 * PLCP setup
 	 * Length calculation depends on OFDM/CCK rate.
 	 */
 	txdesc->signal = hwrate->plcp;
 	txdesc->service = 0x04;

 	if (hwrate->flags & DEV_RATE_OFDM) {
 		txdesc->length_high = (data_length >> 6) & 0x3f;
 		txdesc->length_low = data_length & 0x3f;
 	} else {
 		/*
 		 * Convert length to microseconds.
 		 */
 		residual = GET_DURATION_RES(data_length, hwrate->bitrate);
 		duration = GET_DURATION(data_length, hwrate->bitrate);

 		if (residual != 0) {
 			duration++;

 			/*
 			 * Check if we need to set the Length Extension
 			 */
 			if (hwrate->bitrate == 110 && residual <= 30)
 				txdesc->service |= 0x80;
 		}

 		txdesc->length_high = (duration >> 8) & 0xff;
 		txdesc->length_low = duration & 0xff;

 		/*
 		 * When preamble is enabled we should set the
 		 * preamble bit for the signal.
 		 */
 		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			txdesc->signal |= 0x08;
 	}
 }

 static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 					     struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
 	const struct rt2x00_rate *hwrate;

 	memset(txdesc, 0, sizeof(*txdesc));

 	/*
 	 * Initialize information from queue
 	 */
 	txdesc->queue = entry->queue->qid;
 	txdesc->cw_min = entry->queue->cw_min;
 	txdesc->cw_max = entry->queue->cw_max;
 	txdesc->aifs = entry->queue->aifs;

 	/*
 	 * Check whether this frame is to be acked.
 	 */
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
 		__set_bit(ENTRY_TXD_ACK, &txdesc->flags);

 	/*
 	 * Check if this is a RTS/CTS frame
 	 */
 	if (ieee80211_is_rts(hdr->frame_control) ||
 	    ieee80211_is_cts(hdr->frame_control)) {
 		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
 		if (ieee80211_is_rts(hdr->frame_control))
 			__set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags);
 		else
 			__set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags);
 		if (tx_info->control.rts_cts_rate_idx >= 0)
 			rate =
 			    ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info);
 	}

 	/*
 	 * Determine retry information.
 	 */
 	txdesc->retry_limit = tx_info->control.rates[0].count - 1;
 	if (txdesc->retry_limit >= rt2x00dev->long_retry)
 		__set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags);

 	/*
 	 * Check if more fragments are pending
 	 */
 	if (ieee80211_has_morefrags(hdr->frame_control)) {
 		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
 		__set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
 	}

 	/*
 	 * Beacons and probe responses require the tsf timestamp
 	 * to be inserted into the frame.
 	 */
 	if (ieee80211_is_beacon(hdr->frame_control) ||
 	    ieee80211_is_probe_resp(hdr->frame_control))
 		__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);

 	/*
 	 * Determine with what IFS priority this frame should be send.
 	 * Set ifs to IFS_SIFS when the this is not the first fragment,
 	 * or this fragment came after RTS/CTS.
 	 */
 	if ((tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) &&
 	    !test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) {
 		__set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags);
 		txdesc->ifs = IFS_BACKOFF;
 	} else
 		txdesc->ifs = IFS_SIFS;

 	/*
 	 * Determine rate modulation.
 	 */
 	hwrate = rt2x00_get_rate(rate->hw_value);
 	txdesc->rate_mode = RATE_MODE_CCK;
 	if (hwrate->flags & DEV_RATE_OFDM)
 		txdesc->rate_mode = RATE_MODE_OFDM;

 	/*
 	 * Apply TX descriptor handling by components
 	 */
 	rt2x00crypto_create_tx_descriptor(entry, txdesc);
 	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
 }

 static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 					    struct txentry_desc *txdesc)
 {
 	struct data_queue *queue = entry->queue;
 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;

 	rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc);

 	/*
 	 * All processing on the frame has been completed, this means
 	 * it is now ready to be dumped to userspace through debugfs.
 	 */
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);

 	/*
 	 * Check if we need to kick the queue, there are however a few rules
 	 *	1) Don't kick beacon queue
 	 *	2) Don't kick unless this is the last in frame in a burst.
 	 *	   When the burst flag is set, this frame is always followed
 	 *	   by another frame which in some way are related to eachother.
 	 *	   This is true for fragments, RTS or CTS-to-self frames.
 	 *	3) Rule 2 can be broken when the available entries
 	 *	   in the queue are less then a certain threshold.
 	 */
 	if (entry->queue->qid == QID_BEACON)
 		return;

 	if (rt2x00queue_threshold(queue) ||
 	    !test_bit(ENTRY_TXD_BURST, &txdesc->flags))
 		rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
 }

 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info;
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
 	struct skb_frame_desc *skbdesc;
 	unsigned int iv_len = 0;
 	u8 rate_idx, rate_flags;

 	if (unlikely(rt2x00queue_full(queue)))
 		return -ENOBUFS;

 	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
 		ERROR(queue->rt2x00dev,
 		      "Arrived at non-free entry in the non-full queue %d.\n"
 		      "Please file bug report to %s.\n",
 		      queue->qid, DRV_PROJECT);
 		return -EINVAL;
 	}

 	/*
 	 * Copy all TX descriptor information into txdesc,
 	 * after that we are free to use the skb->cb array
 	 * for our information.
 	 */
 	entry->skb = skb;
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);

 	if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)
 		iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;

 	/*
 	 * All information is retrieved from the skb->cb array,
 	 * now we should claim ownership of the driver part of that
 	 * array, preserving the bitrate index and flags.
 	 */
 	tx_info = IEEE80211_SKB_CB(skb);
 	rate_idx = tx_info->control.rates[0].idx;
 	rate_flags = tx_info->control.rates[0].flags;
 	skbdesc = get_skb_frame_desc(skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = entry;
 	skbdesc->tx_rate_idx = rate_idx;
 	skbdesc->tx_rate_flags = rate_flags;

 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
 	 * the frame so we can provide it to the driver seperately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
 		if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
 			rt2x00crypto_tx_copy_iv(skb, iv_len);
 		else
 			rt2x00crypto_tx_remove_iv(skb, iv_len);
 	}

 	/*
 	 * It could be possible that the queue was corrupted and this
 	 * call failed. Since we always return NETDEV_TX_OK to mac80211,
 	 * this frame will simply be dropped.
 	 */
 	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
 		clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 		entry->skb = NULL;
 		return -EIO;
 	}

 	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
 		rt2x00queue_map_txskb(queue->rt2x00dev, skb);

 	set_bit(ENTRY_DATA_PENDING, &entry->flags);

 	rt2x00queue_index_inc(queue, Q_INDEX);
 	rt2x00queue_write_tx_descriptor(entry, &txdesc);

 	return 0;
 }

 int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 			      struct ieee80211_vif *vif)
 {
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 	struct skb_frame_desc *skbdesc;
 	struct txentry_desc txdesc;
 	__le32 desc[16];

 	if (unlikely(!intf->beacon))
 		return -ENOBUFS;

 	intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
 	if (!intf->beacon->skb)
 		return -ENOMEM;

 	/*
 	 * Copy all TX descriptor information into txdesc,
 	 * after that we are free to use the skb->cb array
 	 * for our information.
 	 */
 	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);

 	/*
 	 * For the descriptor we use a local array from where the
 	 * driver can move it to the correct location required for
 	 * the hardware.
 	 */
 	memset(desc, 0, sizeof(desc));

 	/*
 	 * Fill in skb descriptor
 	 */
 	skbdesc = get_skb_frame_desc(intf->beacon->skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->desc = desc;
 	skbdesc->desc_len = intf->beacon->queue->desc_size;
 	skbdesc->entry = intf->beacon;

 	/*
 	 * Write TX descriptor into reserved room in front of the beacon.
 	 */
 	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);

 	/*
 	 * Send beacon to hardware.
 	 * Also enable beacon generation, which might have been disabled
 	 * by the driver during the config_beacon() callback function.
 	 */
 	rt2x00dev->ops->lib->write_beacon(intf->beacon);
 	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);

 	return 0;
 }

 struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
 					 const enum data_queue_qid queue)
 {
 	int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);

 	if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
 		return &rt2x00dev->tx[queue];

 	if (!rt2x00dev->bcn)
 		return NULL;

 	if (queue == QID_BEACON)
 		return &rt2x00dev->bcn[0];
 	else if (queue == QID_ATIM && atim)
 		return &rt2x00dev->bcn[1];

 	return NULL;
 }
 EXPORT_SYMBOL_GPL(rt2x00queue_get_queue);

 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 					  enum queue_index index)
 {
 	struct queue_entry *entry;
 	unsigned long irqflags;

 	if (unlikely(index >= Q_INDEX_MAX)) {
 		ERROR(queue->rt2x00dev,
 		      "Entry requested from invalid index type (%d)\n", index);
 		return NULL;
 	}

 	spin_lock_irqsave(&queue->lock, irqflags);

 	entry = &queue->entries[queue->index[index]];

 	spin_unlock_irqrestore(&queue->lock, irqflags);

 	return entry;
 }
 EXPORT_SYMBOL_GPL(rt2x00queue_get_entry);

 void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
 {
 	unsigned long irqflags;

 	if (unlikely(index >= Q_INDEX_MAX)) {
 		ERROR(queue->rt2x00dev,
 		      "Index change on invalid index type (%d)\n", index);
 		return;
 	}

 	spin_lock_irqsave(&queue->lock, irqflags);

 	queue->index[index]++;
 	if (queue->index[index] >= queue->limit)
 		queue->index[index] = 0;

 	if (index == Q_INDEX) {
 		queue->length++;
 	} else if (index == Q_INDEX_DONE) {
 		queue->length--;
 		queue->count++;
 	}

 	spin_unlock_irqrestore(&queue->lock, irqflags);
 }

 static void rt2x00queue_reset(struct data_queue *queue)
 {
 	unsigned long irqflags;

 	spin_lock_irqsave(&queue->lock, irqflags);

 	queue->count = 0;
 	queue->length = 0;
 	memset(queue->index, 0, sizeof(queue->index));

 	spin_unlock_irqrestore(&queue->lock, irqflags);
 }

 void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 	unsigned int i;

 	queue_for_each(rt2x00dev, queue) {
 		rt2x00queue_reset(queue);

 		for (i = 0; i < queue->limit; i++) {
 			queue->entries[i].flags = 0;

 			rt2x00dev->ops->lib->clear_entry(&queue->entries[i]);
 		}
 	}
 }

 static int rt2x00queue_alloc_entries(struct data_queue *queue,
 				     const struct data_queue_desc *qdesc)
 {
 	struct queue_entry *entries;
 	unsigned int entry_size;
 	unsigned int i;

 	rt2x00queue_reset(queue);

 	queue->limit = qdesc->entry_num;
 	queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10);
 	queue->data_size = qdesc->data_size;
 	queue->desc_size = qdesc->desc_size;

 	/*
 	 * Allocate all queue entries.
 	 */
 	entry_size = sizeof(*entries) + qdesc->priv_size;
 	entries = kzalloc(queue->limit * entry_size, GFP_KERNEL);
 	if (!entries)
 		return -ENOMEM;

 #define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \
 	( ((char *)(__base)) + ((__limit) * (__esize)) + \
 	    ((__index) * (__psize)) )

 	for (i = 0; i < queue->limit; i++) {
 		entries[i].flags = 0;
 		entries[i].queue = queue;
 		entries[i].skb = NULL;
 		entries[i].entry_idx = i;
 		entries[i].priv_data =
 		    QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit,
 					    sizeof(*entries), qdesc->priv_size);
 	}

 #undef QUEUE_ENTRY_PRIV_OFFSET

 	queue->entries = entries;

 	return 0;
 }

 static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev,
 				  struct data_queue *queue)
 {
 	unsigned int i;

 	if (!queue->entries)
 		return;

 	for (i = 0; i < queue->limit; i++) {
 		if (queue->entries[i].skb)
 			rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb);
 	}
 }

 static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev,
 				    struct data_queue *queue)
 {
 	unsigned int i;
 	struct sk_buff *skb;

 	for (i = 0; i < queue->limit; i++) {
 		skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]);
 		if (!skb)
 			return -ENOMEM;
 		queue->entries[i].skb = skb;
 	}

 	return 0;
 }

 int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 	int status;

 	status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx);
 	if (status)
 		goto exit;

 	tx_queue_for_each(rt2x00dev, queue) {
 		status = rt2x00queue_alloc_entries(queue, rt2x00dev->ops->tx);
 		if (status)
 			goto exit;
 	}

 	status = rt2x00queue_alloc_entries(rt2x00dev->bcn, rt2x00dev->ops->bcn);
 	if (status)
 		goto exit;

 	if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) {
 		status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1],
 						   rt2x00dev->ops->atim);
 		if (status)
 			goto exit;
 	}

 	status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx);
 	if (status)
 		goto exit;

 	return 0;

 exit:
 	ERROR(rt2x00dev, "Queue entries allocation failed.\n");

 	rt2x00queue_uninitialize(rt2x00dev);

 	return status;
 }

 void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;

 	rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx);

 	queue_for_each(rt2x00dev, queue) {
 		kfree(queue->entries);
 		queue->entries = NULL;
 	}
 }

 static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 			     struct data_queue *queue, enum data_queue_qid qid)
 {
 	spin_lock_init(&queue->lock);

 	queue->rt2x00dev = rt2x00dev;
 	queue->qid = qid;
 	queue->txop = 0;
 	queue->aifs = 2;
 	queue->cw_min = 5;
 	queue->cw_max = 10;
 }

 int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 	enum data_queue_qid qid;
 	unsigned int req_atim =
 	    !!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);

 	/*
 	 * We need the following queues:
 	 * RX: 1
 	 * TX: ops->tx_queues
 	 * Beacon: 1
 	 * Atim: 1 (if required)
 	 */
 	rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim;

 	queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL);
 	if (!queue) {
 		ERROR(rt2x00dev, "Queue allocation failed.\n");
 		return -ENOMEM;
 	}

 	/*
 	 * Initialize pointers
 	 */
 	rt2x00dev->rx = queue;
 	rt2x00dev->tx = &queue[1];
 	rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues];

 	/*
 	 * Initialize queue parameters.
 	 * RX: qid = QID_RX
 	 * TX: qid = QID_AC_BE + index
 	 * TX: cw_min: 2^5 = 32.
 	 * TX: cw_max: 2^10 = 1024.
 	 * BCN: qid = QID_BEACON
 	 * ATIM: qid = QID_ATIM
 	 */
 	rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX);

 	qid = QID_AC_BE;
 	tx_queue_for_each(rt2x00dev, queue)
 		rt2x00queue_init(rt2x00dev, queue, qid++);

 	rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_BEACON);
 	if (req_atim)
 		rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_ATIM);

 	return 0;
 }

 void rt2x00queue_free(struct rt2x00_dev *rt2x00dev)
 {
 	kfree(rt2x00dev->rx);
 	rt2x00dev->rx = NULL;
 	rt2x00dev->tx = NULL;
 	rt2x00dev->bcn = NULL;
 }
	/*
	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
	<http://rt2x00.serialmonkey.com>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the
	Free Software Foundation, Inc.,
	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	/*
	Module: rt2x00lib
	Abstract: rt2x00 queue specific routines.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/dma-mapping.h>

	#include "rt2x00.h"
	#include "rt2x00lib.h"

	struct sk_buff rt2x00queue_alloc_rxskb(struct rt2x00_dev rt2x00dev,
	struct queue_entry *entry)
	{
	struct sk_buff *skb;
	struct skb_frame_desc *skbdesc;
	unsigned int frame_size;
	unsigned int head_size = 0;
	unsigned int tail_size = 0;

	/*
	* The frame size includes descriptor size, because the
	* hardware directly receive the frame into the skbuffer.
	*/
	frame_size = entry->queue->data_size + entry->queue->desc_size;

	/*
	* The payload should be aligned to a 4-byte boundary,
	* this means we need at least 3 bytes for moving the frame
	* into the correct offset.
	*/
	head_size = 4;

	/*
	* For IV/EIV/ICV assembly we must make sure there is
	* at least 8 bytes bytes available in headroom for IV/EIV
	* and 8 bytes for ICV data as tailroon.
	*/
	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
	head_size += 8;
	tail_size += 8;
	}

	/*
	* Allocate skbuffer.
	*/
	skb = dev_alloc_skb(frame_size + head_size + tail_size);
	if (!skb)
	return NULL;

	/*
	* Make sure we not have a frame with the requested bytes
	* available in the head and tail.
	*/
	skb_reserve(skb, head_size);
	skb_put(skb, frame_size);

	/*
	* Populate skbdesc.
	*/
	skbdesc = get_skb_frame_desc(skb);
	memset(skbdesc, 0, sizeof(*skbdesc));
	skbdesc->entry = entry;

	if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) {
	skbdesc->skb_dma = dma_map_single(rt2x00dev->dev,
	skb->data,
	skb->len,
	DMA_FROM_DEVICE);
	skbdesc->flags \|= SKBDESC_DMA_MAPPED_RX;
	}

	return skb;
	}

	void rt2x00queue_map_txskb(struct rt2x00_dev rt2x00dev, struct sk_buff skb)
	{
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

	/*
	* If device has requested headroom, we should make sure that
	* is also mapped to the DMA so it can be used for transfering
	* additional descriptor information to the hardware.
	*/
	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);

	skbdesc->skb_dma =
	dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);

	/*
	* Restore data pointer to original location again.
	*/
	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);

	skbdesc->flags \|= SKBDESC_DMA_MAPPED_TX;
	}
	EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);

	void rt2x00queue_unmap_skb(struct rt2x00_dev rt2x00dev, struct sk_buff skb)
	{
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

	if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) {
	dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
	DMA_FROM_DEVICE);
	skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX;
	}

	if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
	/*
	* Add headroom to the skb length, it has been removed
	* by the driver, but it was actually mapped to DMA.
	*/
	dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
	skb->len + rt2x00dev->hw->extra_tx_headroom,
	DMA_TO_DEVICE);
	skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
	}
	}

	void rt2x00queue_free_skb(struct rt2x00_dev rt2x00dev, struct sk_buff skb)
	{
	if (!skb)
	return;

	rt2x00queue_unmap_skb(rt2x00dev, skb);
	dev_kfree_skb_any(skb);
	}

	static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
	struct txentry_desc *txdesc)
	{
	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
	struct ieee80211_hdr hdr = (struct ieee80211_hdr )entry->skb->data;
	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
	unsigned long irqflags;

	if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) \|\|
	unlikely(!tx_info->control.vif))
	return;

	/*
	* Hardware should insert sequence counter.
	* FIXME: We insert a software sequence counter first for
	* hardware that doesn't support hardware sequence counting.
	*
	* This is wrong because beacons are not getting sequence
	* numbers assigned properly.
	*
	* A secondary problem exists for drivers that cannot toggle
	* sequence counting per-frame, since those will override the
	* sequence counter given by mac80211.
	*/
	spin_lock_irqsave(&intf->seqlock, irqflags);

	if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
	intf->seqno += 0x10;
	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
	hdr->seq_ctrl \|= cpu_to_le16(intf->seqno);

	spin_unlock_irqrestore(&intf->seqlock, irqflags);

	__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
	}

	static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
	struct txentry_desc *txdesc,
	const struct rt2x00_rate *hwrate)
	{
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
	unsigned int data_length;
	unsigned int duration;
	unsigned int residual;

	/* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */
	data_length = entry->skb->len + 4;
	data_length += rt2x00crypto_tx_overhead(rt2x00dev, entry->skb);

	/*
	* PLCP setup
	* Length calculation depends on OFDM/CCK rate.
	*/
	txdesc->signal = hwrate->plcp;
	txdesc->service = 0x04;

	if (hwrate->flags & DEV_RATE_OFDM) {
	txdesc->length_high = (data_length >> 6) & 0x3f;
	txdesc->length_low = data_length & 0x3f;
	} else {
	/*
	* Convert length to microseconds.
	*/
	residual = GET_DURATION_RES(data_length, hwrate->bitrate);
	duration = GET_DURATION(data_length, hwrate->bitrate);

	if (residual != 0) {
	duration++;

	/*
	* Check if we need to set the Length Extension
	*/
	if (hwrate->bitrate == 110 && residual <= 30)
	txdesc->service \|= 0x80;
	}

	txdesc->length_high = (duration >> 8) & 0xff;
	txdesc->length_low = duration & 0xff;

	/*
	* When preamble is enabled we should set the
	* preamble bit for the signal.
	*/
	if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
	txdesc->signal \|= 0x08;
	}
	}

	static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
	struct txentry_desc *txdesc)
	{
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
	struct ieee80211_hdr hdr = (struct ieee80211_hdr )entry->skb->data;
	struct ieee80211_rate *rate =
	ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
	const struct rt2x00_rate *hwrate;

	memset(txdesc, 0, sizeof(*txdesc));

	/*
	* Initialize information from queue
	*/
	txdesc->queue = entry->queue->qid;
	txdesc->cw_min = entry->queue->cw_min;
	txdesc->cw_max = entry->queue->cw_max;
	txdesc->aifs = entry->queue->aifs;

	/*
	* Check whether this frame is to be acked.
	*/
	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
	__set_bit(ENTRY_TXD_ACK, &txdesc->flags);

	/*
	* Check if this is a RTS/CTS frame
	*/
	if (ieee80211_is_rts(hdr->frame_control) \|\|
	ieee80211_is_cts(hdr->frame_control)) {
	__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
	if (ieee80211_is_rts(hdr->frame_control))
	__set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags);
	else
	__set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags);
	if (tx_info->control.rts_cts_rate_idx >= 0)
	rate =
	ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info);
	}

	/*
	* Determine retry information.
	*/
	txdesc->retry_limit = tx_info->control.rates[0].count - 1;
	if (txdesc->retry_limit >= rt2x00dev->long_retry)
	__set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags);

	/*
	* Check if more fragments are pending
	*/
	if (ieee80211_has_morefrags(hdr->frame_control)) {
	__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
	__set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
	}

	/*
	* Beacons and probe responses require the tsf timestamp
	* to be inserted into the frame.
	*/
	if (ieee80211_is_beacon(hdr->frame_control) \|\|
	ieee80211_is_probe_resp(hdr->frame_control))
	__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);

	/*
	* Determine with what IFS priority this frame should be send.
	* Set ifs to IFS_SIFS when the this is not the first fragment,
	* or this fragment came after RTS/CTS.
	*/
	if ((tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) &&
	!test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) {
	__set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags);
	txdesc->ifs = IFS_BACKOFF;
	} else
	txdesc->ifs = IFS_SIFS;

	/*
	* Determine rate modulation.
	*/
	hwrate = rt2x00_get_rate(rate->hw_value);
	txdesc->rate_mode = RATE_MODE_CCK;
	if (hwrate->flags & DEV_RATE_OFDM)
	txdesc->rate_mode = RATE_MODE_OFDM;

	/*
	* Apply TX descriptor handling by components
	*/
	rt2x00crypto_create_tx_descriptor(entry, txdesc);
	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
	}

	static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
	struct txentry_desc *txdesc)
	{
	struct data_queue *queue = entry->queue;
	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;

	rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc);

	/*
	* All processing on the frame has been completed, this means
	* it is now ready to be dumped to userspace through debugfs.
	*/
	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);

	/*
	* Check if we need to kick the queue, there are however a few rules
	* 1) Don't kick beacon queue
	* 2) Don't kick unless this is the last in frame in a burst.
	* When the burst flag is set, this frame is always followed
	* by another frame which in some way are related to eachother.
	* This is true for fragments, RTS or CTS-to-self frames.
	* 3) Rule 2 can be broken when the available entries
	* in the queue are less then a certain threshold.
	*/
	if (entry->queue->qid == QID_BEACON)
	return;

	if (rt2x00queue_threshold(queue) \|\|
	!test_bit(ENTRY_TXD_BURST, &txdesc->flags))
	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
	}

	int rt2x00queue_write_tx_frame(struct data_queue queue, struct sk_buff skb)
	{
	struct ieee80211_tx_info *tx_info;
	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
	struct txentry_desc txdesc;
	struct skb_frame_desc *skbdesc;
	unsigned int iv_len = 0;
	u8 rate_idx, rate_flags;

	if (unlikely(rt2x00queue_full(queue)))
	return -ENOBUFS;

	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
	ERROR(queue->rt2x00dev,
	"Arrived at non-free entry in the non-full queue %d.\n"
	"Please file bug report to %s.\n",
	queue->qid, DRV_PROJECT);
	return -EINVAL;
	}

	/*
	* Copy all TX descriptor information into txdesc,
	* after that we are free to use the skb->cb array
	* for our information.
	*/
	entry->skb = skb;
	rt2x00queue_create_tx_descriptor(entry, &txdesc);

	if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)
	iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;

	/*
	* All information is retrieved from the skb->cb array,
	* now we should claim ownership of the driver part of that
	* array, preserving the bitrate index and flags.
	*/
	tx_info = IEEE80211_SKB_CB(skb);
	rate_idx = tx_info->control.rates[0].idx;
	rate_flags = tx_info->control.rates[0].flags;
	skbdesc = get_skb_frame_desc(skb);
	memset(skbdesc, 0, sizeof(*skbdesc));
	skbdesc->entry = entry;
	skbdesc->tx_rate_idx = rate_idx;
	skbdesc->tx_rate_flags = rate_flags;

	/*
	* When hardware encryption is supported, and this frame
	* is to be encrypted, we should strip the IV/EIV data from
	* the frame so we can provide it to the driver seperately.
	*/
	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
	!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
	if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
	rt2x00crypto_tx_copy_iv(skb, iv_len);
	else
	rt2x00crypto_tx_remove_iv(skb, iv_len);
	}

	/*
	* It could be possible that the queue was corrupted and this
	* call failed. Since we always return NETDEV_TX_OK to mac80211,
	* this frame will simply be dropped.
	*/
	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
	clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
	entry->skb = NULL;
	return -EIO;
	}

	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
	rt2x00queue_map_txskb(queue->rt2x00dev, skb);

	set_bit(ENTRY_DATA_PENDING, &entry->flags);

	rt2x00queue_index_inc(queue, Q_INDEX);
	rt2x00queue_write_tx_descriptor(entry, &txdesc);

	return 0;
	}

	int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
	struct ieee80211_vif *vif)
	{
	struct rt2x00_intf *intf = vif_to_intf(vif);
	struct skb_frame_desc *skbdesc;
	struct txentry_desc txdesc;
	__le32 desc[16];

	if (unlikely(!intf->beacon))
	return -ENOBUFS;

	intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
	if (!intf->beacon->skb)
	return -ENOMEM;

	/*
	* Copy all TX descriptor information into txdesc,
	* after that we are free to use the skb->cb array
	* for our information.
	*/
	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);

	/*
	* For the descriptor we use a local array from where the
	* driver can move it to the correct location required for
	* the hardware.
	*/
	memset(desc, 0, sizeof(desc));

	/*
	* Fill in skb descriptor
	*/
	skbdesc = get_skb_frame_desc(intf->beacon->skb);
	memset(skbdesc, 0, sizeof(*skbdesc));
	skbdesc->desc = desc;
	skbdesc->desc_len = intf->beacon->queue->desc_size;
	skbdesc->entry = intf->beacon;

	/*
	* Write TX descriptor into reserved room in front of the beacon.
	*/
	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);

	/*
	* Send beacon to hardware.
	* Also enable beacon generation, which might have been disabled
	* by the driver during the config_beacon() callback function.
	*/
	rt2x00dev->ops->lib->write_beacon(intf->beacon);
	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);

	return 0;
	}

	struct data_queue rt2x00queue_get_queue(struct rt2x00_dev rt2x00dev,
	const enum data_queue_qid queue)
	{
	int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);

	if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
	return &rt2x00dev->tx[queue];

	if (!rt2x00dev->bcn)
	return NULL;

	if (queue == QID_BEACON)
	return &rt2x00dev->bcn[0];
	else if (queue == QID_ATIM && atim)
	return &rt2x00dev->bcn[1];

	return NULL;
	}
	EXPORT_SYMBOL_GPL(rt2x00queue_get_queue);

	struct queue_entry rt2x00queue_get_entry(struct data_queue queue,
	enum queue_index index)
	{
	struct queue_entry *entry;
	unsigned long irqflags;

	if (unlikely(index >= Q_INDEX_MAX)) {
	ERROR(queue->rt2x00dev,
	"Entry requested from invalid index type (%d)\n", index);
	return NULL;
	}

	spin_lock_irqsave(&queue->lock, irqflags);

	entry = &queue->entries[queue->index[index]];

	spin_unlock_irqrestore(&queue->lock, irqflags);

	return entry;
	}
	EXPORT_SYMBOL_GPL(rt2x00queue_get_entry);

	void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
	{
	unsigned long irqflags;

	if (unlikely(index >= Q_INDEX_MAX)) {
	ERROR(queue->rt2x00dev,
	"Index change on invalid index type (%d)\n", index);
	return;
	}

	spin_lock_irqsave(&queue->lock, irqflags);

	queue->index[index]++;
	if (queue->index[index] >= queue->limit)
	queue->index[index] = 0;

	if (index == Q_INDEX) {
	queue->length++;
	} else if (index == Q_INDEX_DONE) {
	queue->length--;
	queue->count++;
	}

	spin_unlock_irqrestore(&queue->lock, irqflags);
	}

	static void rt2x00queue_reset(struct data_queue *queue)
	{
	unsigned long irqflags;

	spin_lock_irqsave(&queue->lock, irqflags);

	queue->count = 0;
	queue->length = 0;
	memset(queue->index, 0, sizeof(queue->index));

	spin_unlock_irqrestore(&queue->lock, irqflags);
	}

	void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
	{
	struct data_queue *queue;
	unsigned int i;

	queue_for_each(rt2x00dev, queue) {
	rt2x00queue_reset(queue);

	for (i = 0; i < queue->limit; i++) {
	queue->entries[i].flags = 0;

	rt2x00dev->ops->lib->clear_entry(&queue->entries[i]);
	}
	}
	}

	static int rt2x00queue_alloc_entries(struct data_queue *queue,
	const struct data_queue_desc *qdesc)
	{
	struct queue_entry *entries;
	unsigned int entry_size;
	unsigned int i;

	rt2x00queue_reset(queue);

	queue->limit = qdesc->entry_num;
	queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10);
	queue->data_size = qdesc->data_size;
	queue->desc_size = qdesc->desc_size;

	/*
	* Allocate all queue entries.
	*/
	entry_size = sizeof(*entries) + qdesc->priv_size;
	entries = kzalloc(queue->limit * entry_size, GFP_KERNEL);
	if (!entries)
	return -ENOMEM;

	#define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \
	( ((char )(__base)) + ((__limit) (__esize)) + \
	((__index) * (__psize)) )

	for (i = 0; i < queue->limit; i++) {
	entries[i].flags = 0;
	entries[i].queue = queue;
	entries[i].skb = NULL;
	entries[i].entry_idx = i;
	entries[i].priv_data =
	QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit,
	sizeof(*entries), qdesc->priv_size);
	}

	#undef QUEUE_ENTRY_PRIV_OFFSET

	queue->entries = entries;

	return 0;
	}

	static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev,
	struct data_queue *queue)
	{
	unsigned int i;

	if (!queue->entries)
	return;

	for (i = 0; i < queue->limit; i++) {
	if (queue->entries[i].skb)
	rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb);
	}
	}

	static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev,
	struct data_queue *queue)
	{
	unsigned int i;
	struct sk_buff *skb;

	for (i = 0; i < queue->limit; i++) {
	skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]);
	if (!skb)
	return -ENOMEM;
	queue->entries[i].skb = skb;
	}

	return 0;
	}

	int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev)
	{
	struct data_queue *queue;
	int status;

	status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx);
	if (status)
	goto exit;

	tx_queue_for_each(rt2x00dev, queue) {
	status = rt2x00queue_alloc_entries(queue, rt2x00dev->ops->tx);
	if (status)
	goto exit;
	}

	status = rt2x00queue_alloc_entries(rt2x00dev->bcn, rt2x00dev->ops->bcn);
	if (status)
	goto exit;

	if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) {
	status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1],
	rt2x00dev->ops->atim);
	if (status)
	goto exit;
	}

	status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx);
	if (status)
	goto exit;

	return 0;

	exit:
	ERROR(rt2x00dev, "Queue entries allocation failed.\n");

	rt2x00queue_uninitialize(rt2x00dev);

	return status;
	}

	void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
	{
	struct data_queue *queue;

	rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx);

	queue_for_each(rt2x00dev, queue) {
	kfree(queue->entries);
	queue->entries = NULL;
	}
	}

	static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
	struct data_queue *queue, enum data_queue_qid qid)
	{
	spin_lock_init(&queue->lock);

	queue->rt2x00dev = rt2x00dev;
	queue->qid = qid;
	queue->txop = 0;
	queue->aifs = 2;
	queue->cw_min = 5;
	queue->cw_max = 10;
	}

	int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
	{
	struct data_queue *queue;
	enum data_queue_qid qid;
	unsigned int req_atim =
	!!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);

	/*
	* We need the following queues:
	* RX: 1
	* TX: ops->tx_queues
	* Beacon: 1
	* Atim: 1 (if required)
	*/
	rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim;

	queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL);
	if (!queue) {
	ERROR(rt2x00dev, "Queue allocation failed.\n");
	return -ENOMEM;
	}

	/*
	* Initialize pointers
	*/
	rt2x00dev->rx = queue;
	rt2x00dev->tx = &queue[1];
	rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues];

	/*
	* Initialize queue parameters.
	* RX: qid = QID_RX
	* TX: qid = QID_AC_BE + index
	* TX: cw_min: 2^5 = 32.
	* TX: cw_max: 2^10 = 1024.
	* BCN: qid = QID_BEACON
	* ATIM: qid = QID_ATIM
	*/
	rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX);

	qid = QID_AC_BE;
	tx_queue_for_each(rt2x00dev, queue)
	rt2x00queue_init(rt2x00dev, queue, qid++);

	rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_BEACON);
	if (req_atim)
	rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_ATIM);

	return 0;
	}

	void rt2x00queue_free(struct rt2x00_dev *rt2x00dev)
	{
	kfree(rt2x00dev->rx);
	rt2x00dev->rx = NULL;
	rt2x00dev->tx = NULL;
	rt2x00dev->bcn = NULL;
	}