| /************************************************************************** |
| * Copyright (c) 2011, Intel Corporation. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| **************************************************************************/ |
| |
| #include <linux/backlight.h> |
| #include <linux/module.h> |
| #include <linux/dmi.h> |
| #include <drm/drmP.h> |
| #include <drm/drm.h> |
| #include "gma_drm.h" |
| #include "psb_drv.h" |
| #include "psb_reg.h" |
| #include "psb_intel_reg.h" |
| #include <asm/mrst.h> |
| #include <asm/intel_scu_ipc.h> |
| #include "mid_bios.h" |
| #include "intel_bios.h" |
| |
| static int oaktrail_output_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| if (dev_priv->iLVDS_enable) |
| oaktrail_lvds_init(dev, &dev_priv->mode_dev); |
| else |
| dev_err(dev->dev, "DSI is not supported\n"); |
| if (dev_priv->hdmi_priv) |
| oaktrail_hdmi_init(dev, &dev_priv->mode_dev); |
| return 0; |
| } |
| |
| /* |
| * Provide the low level interfaces for the Moorestown backlight |
| */ |
| |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE |
| |
| #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF |
| #define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ |
| #define BLC_PWM_FREQ_CALC_CONSTANT 32 |
| #define MHz 1000000 |
| #define BLC_ADJUSTMENT_MAX 100 |
| |
| static struct backlight_device *oaktrail_backlight_device; |
| static int oaktrail_brightness; |
| |
| static int oaktrail_set_brightness(struct backlight_device *bd) |
| { |
| struct drm_device *dev = bl_get_data(oaktrail_backlight_device); |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int level = bd->props.brightness; |
| u32 blc_pwm_ctl; |
| u32 max_pwm_blc; |
| |
| /* Percentage 1-100% being valid */ |
| if (level < 1) |
| level = 1; |
| |
| if (gma_power_begin(dev, 0)) { |
| /* Calculate and set the brightness value */ |
| max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16; |
| blc_pwm_ctl = level * max_pwm_blc / 100; |
| |
| /* Adjust the backlight level with the percent in |
| * dev_priv->blc_adj1; |
| */ |
| blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1; |
| blc_pwm_ctl = blc_pwm_ctl / 100; |
| |
| /* Adjust the backlight level with the percent in |
| * dev_priv->blc_adj2; |
| */ |
| blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2; |
| blc_pwm_ctl = blc_pwm_ctl / 100; |
| |
| /* force PWM bit on */ |
| REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); |
| REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl); |
| gma_power_end(dev); |
| } |
| oaktrail_brightness = level; |
| return 0; |
| } |
| |
| static int oaktrail_get_brightness(struct backlight_device *bd) |
| { |
| /* return locally cached var instead of HW read (due to DPST etc.) */ |
| /* FIXME: ideally return actual value in case firmware fiddled with |
| it */ |
| return oaktrail_brightness; |
| } |
| |
| static int device_backlight_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| unsigned long core_clock; |
| u16 bl_max_freq; |
| uint32_t value; |
| uint32_t blc_pwm_precision_factor; |
| |
| dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; |
| dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; |
| bl_max_freq = 256; |
| /* this needs to be set elsewhere */ |
| blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR; |
| |
| core_clock = dev_priv->core_freq; |
| |
| value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; |
| value *= blc_pwm_precision_factor; |
| value /= bl_max_freq; |
| value /= blc_pwm_precision_factor; |
| |
| if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ) |
| return -ERANGE; |
| |
| if (gma_power_begin(dev, false)) { |
| REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); |
| REG_WRITE(BLC_PWM_CTL, value | (value << 16)); |
| gma_power_end(dev); |
| } |
| return 0; |
| } |
| |
| static const struct backlight_ops oaktrail_ops = { |
| .get_brightness = oaktrail_get_brightness, |
| .update_status = oaktrail_set_brightness, |
| }; |
| |
| static int oaktrail_backlight_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int ret; |
| struct backlight_properties props; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = 100; |
| props.type = BACKLIGHT_PLATFORM; |
| |
| oaktrail_backlight_device = backlight_device_register("oaktrail-bl", |
| NULL, (void *)dev, &oaktrail_ops, &props); |
| |
| if (IS_ERR(oaktrail_backlight_device)) |
| return PTR_ERR(oaktrail_backlight_device); |
| |
| ret = device_backlight_init(dev); |
| if (ret < 0) { |
| backlight_device_unregister(oaktrail_backlight_device); |
| return ret; |
| } |
| oaktrail_backlight_device->props.brightness = 100; |
| oaktrail_backlight_device->props.max_brightness = 100; |
| backlight_update_status(oaktrail_backlight_device); |
| dev_priv->backlight_device = oaktrail_backlight_device; |
| return 0; |
| } |
| |
| #endif |
| |
| /* |
| * Provide the Moorestown specific chip logic and low level methods |
| * for power management |
| */ |
| |
| /** |
| * oaktrail_save_display_registers - save registers lost on suspend |
| * @dev: our DRM device |
| * |
| * Save the state we need in order to be able to restore the interface |
| * upon resume from suspend |
| */ |
| static int oaktrail_save_display_registers(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct psb_save_area *regs = &dev_priv->regs; |
| int i; |
| u32 pp_stat; |
| |
| /* Display arbitration control + watermarks */ |
| regs->psb.saveDSPARB = PSB_RVDC32(DSPARB); |
| regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1); |
| regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2); |
| regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3); |
| regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4); |
| regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5); |
| regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6); |
| regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); |
| |
| /* Pipe & plane A info */ |
| regs->psb.savePIPEACONF = PSB_RVDC32(PIPEACONF); |
| regs->psb.savePIPEASRC = PSB_RVDC32(PIPEASRC); |
| regs->psb.saveFPA0 = PSB_RVDC32(MRST_FPA0); |
| regs->psb.saveFPA1 = PSB_RVDC32(MRST_FPA1); |
| regs->psb.saveDPLL_A = PSB_RVDC32(MRST_DPLL_A); |
| regs->psb.saveHTOTAL_A = PSB_RVDC32(HTOTAL_A); |
| regs->psb.saveHBLANK_A = PSB_RVDC32(HBLANK_A); |
| regs->psb.saveHSYNC_A = PSB_RVDC32(HSYNC_A); |
| regs->psb.saveVTOTAL_A = PSB_RVDC32(VTOTAL_A); |
| regs->psb.saveVBLANK_A = PSB_RVDC32(VBLANK_A); |
| regs->psb.saveVSYNC_A = PSB_RVDC32(VSYNC_A); |
| regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A); |
| regs->psb.saveDSPACNTR = PSB_RVDC32(DSPACNTR); |
| regs->psb.saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE); |
| regs->psb.saveDSPAADDR = PSB_RVDC32(DSPABASE); |
| regs->psb.saveDSPASURF = PSB_RVDC32(DSPASURF); |
| regs->psb.saveDSPALINOFF = PSB_RVDC32(DSPALINOFF); |
| regs->psb.saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF); |
| |
| /* Save cursor regs */ |
| regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); |
| regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); |
| regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); |
| |
| /* Save palette (gamma) */ |
| for (i = 0; i < 256; i++) |
| regs->psb.save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2)); |
| |
| if (dev_priv->hdmi_priv) |
| oaktrail_hdmi_save(dev); |
| |
| /* Save performance state */ |
| regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE); |
| |
| /* LVDS state */ |
| regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL); |
| regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); |
| regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS); |
| regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL); |
| regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2); |
| regs->psb.saveLVDS = PSB_RVDC32(LVDS); |
| regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); |
| regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON); |
| regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF); |
| regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE); |
| |
| /* HW overlay */ |
| regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD); |
| regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); |
| regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); |
| regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); |
| regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); |
| regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); |
| regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); |
| |
| /* DPST registers */ |
| regs->psb.saveHISTOGRAM_INT_CONTROL_REG = |
| PSB_RVDC32(HISTOGRAM_INT_CONTROL); |
| regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG = |
| PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); |
| regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC); |
| |
| if (dev_priv->iLVDS_enable) { |
| /* Shut down the panel */ |
| PSB_WVDC32(0, PP_CONTROL); |
| |
| do { |
| pp_stat = PSB_RVDC32(PP_STATUS); |
| } while (pp_stat & 0x80000000); |
| |
| /* Turn off the plane */ |
| PSB_WVDC32(0x58000000, DSPACNTR); |
| /* Trigger the plane disable */ |
| PSB_WVDC32(0, DSPASURF); |
| |
| /* Wait ~4 ticks */ |
| msleep(4); |
| |
| /* Turn off pipe */ |
| PSB_WVDC32(0x0, PIPEACONF); |
| /* Wait ~8 ticks */ |
| msleep(8); |
| |
| /* Turn off PLLs */ |
| PSB_WVDC32(0, MRST_DPLL_A); |
| } |
| return 0; |
| } |
| |
| /** |
| * oaktrail_restore_display_registers - restore lost register state |
| * @dev: our DRM device |
| * |
| * Restore register state that was lost during suspend and resume. |
| */ |
| static int oaktrail_restore_display_registers(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct psb_save_area *regs = &dev_priv->regs; |
| u32 pp_stat; |
| int i; |
| |
| /* Display arbitration + watermarks */ |
| PSB_WVDC32(regs->psb.saveDSPARB, DSPARB); |
| PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1); |
| PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2); |
| PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3); |
| PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4); |
| PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5); |
| PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6); |
| PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT); |
| |
| /* Make sure VGA plane is off. it initializes to on after reset!*/ |
| PSB_WVDC32(0x80000000, VGACNTRL); |
| |
| /* set the plls */ |
| PSB_WVDC32(regs->psb.saveFPA0, MRST_FPA0); |
| PSB_WVDC32(regs->psb.saveFPA1, MRST_FPA1); |
| |
| /* Actually enable it */ |
| PSB_WVDC32(regs->psb.saveDPLL_A, MRST_DPLL_A); |
| DRM_UDELAY(150); |
| |
| /* Restore mode */ |
| PSB_WVDC32(regs->psb.saveHTOTAL_A, HTOTAL_A); |
| PSB_WVDC32(regs->psb.saveHBLANK_A, HBLANK_A); |
| PSB_WVDC32(regs->psb.saveHSYNC_A, HSYNC_A); |
| PSB_WVDC32(regs->psb.saveVTOTAL_A, VTOTAL_A); |
| PSB_WVDC32(regs->psb.saveVBLANK_A, VBLANK_A); |
| PSB_WVDC32(regs->psb.saveVSYNC_A, VSYNC_A); |
| PSB_WVDC32(regs->psb.savePIPEASRC, PIPEASRC); |
| PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A); |
| |
| /* Restore performance mode*/ |
| PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE); |
| |
| /* Enable the pipe*/ |
| if (dev_priv->iLVDS_enable) |
| PSB_WVDC32(regs->psb.savePIPEACONF, PIPEACONF); |
| |
| /* Set up the plane*/ |
| PSB_WVDC32(regs->psb.saveDSPALINOFF, DSPALINOFF); |
| PSB_WVDC32(regs->psb.saveDSPASTRIDE, DSPASTRIDE); |
| PSB_WVDC32(regs->psb.saveDSPATILEOFF, DSPATILEOFF); |
| |
| /* Enable the plane */ |
| PSB_WVDC32(regs->psb.saveDSPACNTR, DSPACNTR); |
| PSB_WVDC32(regs->psb.saveDSPASURF, DSPASURF); |
| |
| /* Enable Cursor A */ |
| PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR); |
| PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS); |
| PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE); |
| |
| /* Restore palette (gamma) */ |
| for (i = 0; i < 256; i++) |
| PSB_WVDC32(regs->psb.save_palette_a[i], PALETTE_A + (i << 2)); |
| |
| if (dev_priv->hdmi_priv) |
| oaktrail_hdmi_restore(dev); |
| |
| if (dev_priv->iLVDS_enable) { |
| PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2); |
| PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/ |
| PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL); |
| PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); |
| PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS); |
| PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL); |
| PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON); |
| PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF); |
| PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE); |
| PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL); |
| } |
| |
| /* Wait for cycle delay */ |
| do { |
| pp_stat = PSB_RVDC32(PP_STATUS); |
| } while (pp_stat & 0x08000000); |
| |
| /* Wait for panel power up */ |
| do { |
| pp_stat = PSB_RVDC32(PP_STATUS); |
| } while (pp_stat & 0x10000000); |
| |
| /* Restore HW overlay */ |
| PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4); |
| PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5); |
| |
| /* DPST registers */ |
| PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG, |
| HISTOGRAM_INT_CONTROL); |
| PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG, |
| HISTOGRAM_LOGIC_CONTROL); |
| PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC); |
| |
| return 0; |
| } |
| |
| /** |
| * oaktrail_power_down - power down the display island |
| * @dev: our DRM device |
| * |
| * Power down the display interface of our device |
| */ |
| static int oaktrail_power_down(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| u32 pwr_mask ; |
| u32 pwr_sts; |
| |
| pwr_mask = PSB_PWRGT_DISPLAY_MASK; |
| outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC); |
| |
| while (true) { |
| pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); |
| if ((pwr_sts & pwr_mask) == pwr_mask) |
| break; |
| else |
| udelay(10); |
| } |
| return 0; |
| } |
| |
| /* |
| * oaktrail_power_up |
| * |
| * Restore power to the specified island(s) (powergating) |
| */ |
| static int oaktrail_power_up(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK; |
| u32 pwr_sts, pwr_cnt; |
| |
| pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); |
| pwr_cnt &= ~pwr_mask; |
| outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC)); |
| |
| while (true) { |
| pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); |
| if ((pwr_sts & pwr_mask) == 0) |
| break; |
| else |
| udelay(10); |
| } |
| return 0; |
| } |
| |
| |
| static int oaktrail_chip_setup(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct oaktrail_vbt *vbt = &dev_priv->vbt_data; |
| int ret; |
| |
| ret = mid_chip_setup(dev); |
| if (ret < 0) |
| return ret; |
| if (vbt->size == 0) { |
| /* Now pull the BIOS data */ |
| gma_intel_opregion_init(dev); |
| psb_intel_init_bios(dev); |
| } |
| return 0; |
| } |
| |
| static void oaktrail_teardown(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct oaktrail_vbt *vbt = &dev_priv->vbt_data; |
| |
| oaktrail_hdmi_teardown(dev); |
| if (vbt->size == 0) |
| psb_intel_destroy_bios(dev); |
| } |
| |
| const struct psb_ops oaktrail_chip_ops = { |
| .name = "Oaktrail", |
| .accel_2d = 1, |
| .pipes = 2, |
| .crtcs = 2, |
| .sgx_offset = MRST_SGX_OFFSET, |
| |
| .chip_setup = oaktrail_chip_setup, |
| .chip_teardown = oaktrail_teardown, |
| .crtc_helper = &oaktrail_helper_funcs, |
| .crtc_funcs = &psb_intel_crtc_funcs, |
| |
| .output_init = oaktrail_output_init, |
| |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE |
| .backlight_init = oaktrail_backlight_init, |
| #endif |
| |
| .save_regs = oaktrail_save_display_registers, |
| .restore_regs = oaktrail_restore_display_registers, |
| .power_down = oaktrail_power_down, |
| .power_up = oaktrail_power_up, |
| |
| .i2c_bus = 1, |
| }; |