drivers/mfd/wm831x-irq.c - kernel/msm-4.9 - Gitiles

 /*
  * wm831x-irq.c  --  Interrupt controller support for Wolfson WM831x PMICs
  *
  * Copyright 2009 Wolfson Microelectronics PLC.
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/interrupt.h>

 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
 #include <linux/mfd/wm831x/gpio.h>
 #include <linux/mfd/wm831x/irq.h>

 #include <linux/delay.h>

 struct wm831x_irq_data {
 	int primary;
 	int reg;
 	int mask;
 };

 static struct wm831x_irq_data wm831x_irqs[] = {
 	[WM831X_IRQ_TEMP_THW] = {
 		.primary = WM831X_TEMP_INT,
 		.reg = 1,
 		.mask = WM831X_TEMP_THW_EINT,
 	},
 	[WM831X_IRQ_GPIO_1] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP1_EINT,
 	},
 	[WM831X_IRQ_GPIO_2] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP2_EINT,
 	},
 	[WM831X_IRQ_GPIO_3] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP3_EINT,
 	},
 	[WM831X_IRQ_GPIO_4] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP4_EINT,
 	},
 	[WM831X_IRQ_GPIO_5] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP5_EINT,
 	},
 	[WM831X_IRQ_GPIO_6] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP6_EINT,
 	},
 	[WM831X_IRQ_GPIO_7] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP7_EINT,
 	},
 	[WM831X_IRQ_GPIO_8] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP8_EINT,
 	},
 	[WM831X_IRQ_GPIO_9] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP9_EINT,
 	},
 	[WM831X_IRQ_GPIO_10] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP10_EINT,
 	},
 	[WM831X_IRQ_GPIO_11] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP11_EINT,
 	},
 	[WM831X_IRQ_GPIO_12] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP12_EINT,
 	},
 	[WM831X_IRQ_GPIO_13] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP13_EINT,
 	},
 	[WM831X_IRQ_GPIO_14] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP14_EINT,
 	},
 	[WM831X_IRQ_GPIO_15] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP15_EINT,
 	},
 	[WM831X_IRQ_GPIO_16] = {
 		.primary = WM831X_GP_INT,
 		.reg = 5,
 		.mask = WM831X_GP16_EINT,
 	},
 	[WM831X_IRQ_ON] = {
 		.primary = WM831X_ON_PIN_INT,
 		.reg = 1,
 		.mask = WM831X_ON_PIN_EINT,
 	},
 	[WM831X_IRQ_PPM_SYSLO] = {
 		.primary = WM831X_PPM_INT,
 		.reg = 1,
 		.mask = WM831X_PPM_SYSLO_EINT,
 	},
 	[WM831X_IRQ_PPM_PWR_SRC] = {
 		.primary = WM831X_PPM_INT,
 		.reg = 1,
 		.mask = WM831X_PPM_PWR_SRC_EINT,
 	},
 	[WM831X_IRQ_PPM_USB_CURR] = {
 		.primary = WM831X_PPM_INT,
 		.reg = 1,
 		.mask = WM831X_PPM_USB_CURR_EINT,
 	},
 	[WM831X_IRQ_WDOG_TO] = {
 		.primary = WM831X_WDOG_INT,
 		.reg = 1,
 		.mask = WM831X_WDOG_TO_EINT,
 	},
 	[WM831X_IRQ_RTC_PER] = {
 		.primary = WM831X_RTC_INT,
 		.reg = 1,
 		.mask = WM831X_RTC_PER_EINT,
 	},
 	[WM831X_IRQ_RTC_ALM] = {
 		.primary = WM831X_RTC_INT,
 		.reg = 1,
 		.mask = WM831X_RTC_ALM_EINT,
 	},
 	[WM831X_IRQ_CHG_BATT_HOT] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_BATT_HOT_EINT,
 	},
 	[WM831X_IRQ_CHG_BATT_COLD] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_BATT_COLD_EINT,
 	},
 	[WM831X_IRQ_CHG_BATT_FAIL] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_BATT_FAIL_EINT,
 	},
 	[WM831X_IRQ_CHG_OV] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_OV_EINT,
 	},
 	[WM831X_IRQ_CHG_END] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_END_EINT,
 	},
 	[WM831X_IRQ_CHG_TO] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_TO_EINT,
 	},
 	[WM831X_IRQ_CHG_MODE] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_MODE_EINT,
 	},
 	[WM831X_IRQ_CHG_START] = {
 		.primary = WM831X_CHG_INT,
 		.reg = 2,
 		.mask = WM831X_CHG_START_EINT,
 	},
 	[WM831X_IRQ_TCHDATA] = {
 		.primary = WM831X_TCHDATA_INT,
 		.reg = 1,
 		.mask = WM831X_TCHDATA_EINT,
 	},
 	[WM831X_IRQ_TCHPD] = {
 		.primary = WM831X_TCHPD_INT,
 		.reg = 1,
 		.mask = WM831X_TCHPD_EINT,
 	},
 	[WM831X_IRQ_AUXADC_DATA] = {
 		.primary = WM831X_AUXADC_INT,
 		.reg = 1,
 		.mask = WM831X_AUXADC_DATA_EINT,
 	},
 	[WM831X_IRQ_AUXADC_DCOMP1] = {
 		.primary = WM831X_AUXADC_INT,
 		.reg = 1,
 		.mask = WM831X_AUXADC_DCOMP1_EINT,
 	},
 	[WM831X_IRQ_AUXADC_DCOMP2] = {
 		.primary = WM831X_AUXADC_INT,
 		.reg = 1,
 		.mask = WM831X_AUXADC_DCOMP2_EINT,
 	},
 	[WM831X_IRQ_AUXADC_DCOMP3] = {
 		.primary = WM831X_AUXADC_INT,
 		.reg = 1,
 		.mask = WM831X_AUXADC_DCOMP3_EINT,
 	},
 	[WM831X_IRQ_AUXADC_DCOMP4] = {
 		.primary = WM831X_AUXADC_INT,
 		.reg = 1,
 		.mask = WM831X_AUXADC_DCOMP4_EINT,
 	},
 	[WM831X_IRQ_CS1] = {
 		.primary = WM831X_CS_INT,
 		.reg = 2,
 		.mask = WM831X_CS1_EINT,
 	},
 	[WM831X_IRQ_CS2] = {
 		.primary = WM831X_CS_INT,
 		.reg = 2,
 		.mask = WM831X_CS2_EINT,
 	},
 	[WM831X_IRQ_HC_DC1] = {
 		.primary = WM831X_HC_INT,
 		.reg = 4,
 		.mask = WM831X_HC_DC1_EINT,
 	},
 	[WM831X_IRQ_HC_DC2] = {
 		.primary = WM831X_HC_INT,
 		.reg = 4,
 		.mask = WM831X_HC_DC2_EINT,
 	},
 	[WM831X_IRQ_UV_LDO1] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO1_EINT,
 	},
 	[WM831X_IRQ_UV_LDO2] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO2_EINT,
 	},
 	[WM831X_IRQ_UV_LDO3] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO3_EINT,
 	},
 	[WM831X_IRQ_UV_LDO4] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO4_EINT,
 	},
 	[WM831X_IRQ_UV_LDO5] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO5_EINT,
 	},
 	[WM831X_IRQ_UV_LDO6] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO6_EINT,
 	},
 	[WM831X_IRQ_UV_LDO7] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO7_EINT,
 	},
 	[WM831X_IRQ_UV_LDO8] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO8_EINT,
 	},
 	[WM831X_IRQ_UV_LDO9] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO9_EINT,
 	},
 	[WM831X_IRQ_UV_LDO10] = {
 		.primary = WM831X_UV_INT,
 		.reg = 3,
 		.mask = WM831X_UV_LDO10_EINT,
 	},
 	[WM831X_IRQ_UV_DC1] = {
 		.primary = WM831X_UV_INT,
 		.reg = 4,
 		.mask = WM831X_UV_DC1_EINT,
 	},
 	[WM831X_IRQ_UV_DC2] = {
 		.primary = WM831X_UV_INT,
 		.reg = 4,
 		.mask = WM831X_UV_DC2_EINT,
 	},
 	[WM831X_IRQ_UV_DC3] = {
 		.primary = WM831X_UV_INT,
 		.reg = 4,
 		.mask = WM831X_UV_DC3_EINT,
 	},
 	[WM831X_IRQ_UV_DC4] = {
 		.primary = WM831X_UV_INT,
 		.reg = 4,
 		.mask = WM831X_UV_DC4_EINT,
 	},
 };

 static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
 {
 	return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
 }

 static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
 {
 	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
 }

 static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
 							int irq)
 {
 	return &wm831x_irqs[irq - wm831x->irq_base];
 }

 static void wm831x_irq_lock(struct irq_data *data)
 {
 	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);

 	mutex_lock(&wm831x->irq_lock);
 }

 static void wm831x_irq_sync_unlock(struct irq_data *data)
 {
 	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
 	int i;

 	for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
 		if (wm831x->gpio_update[i]) {
 			wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
 					WM831X_GPN_INT_MODE | WM831X_GPN_POL,
 					wm831x->gpio_update[i]);
 			wm831x->gpio_update[i] = 0;
 		}
 	}

 	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
 		/* If there's been a change in the mask write it back
 		 * to the hardware. */
 		if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
 			dev_dbg(wm831x->dev, "IRQ mask sync: %x = %x\n",
 				WM831X_INTERRUPT_STATUS_1_MASK + i,
 				wm831x->irq_masks_cur[i]);

 			wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
 			wm831x_reg_write(wm831x,
 					 WM831X_INTERRUPT_STATUS_1_MASK + i,
 					 wm831x->irq_masks_cur[i]);
 		}
 	}

 	mutex_unlock(&wm831x->irq_lock);
 }

 static void wm831x_irq_enable(struct irq_data *data)
 {
 	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
 	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
 							     data->irq);

 	wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
 }

 static void wm831x_irq_disable(struct irq_data *data)
 {
 	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
 	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
 							     data->irq);

 	wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
 }

 static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
 {
 	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
 	int irq;

 	irq = data->irq - wm831x->irq_base;

 	if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
 		/* Ignore internal-only IRQs */
 		if (irq >= 0 && irq < WM831X_NUM_IRQS)
 			return 0;
 		else
 			return -EINVAL;
 	}

 	/* Rebase the IRQ into the GPIO range so we've got a sensible array
 	 * index.
 	 */
 	irq -= WM831X_IRQ_GPIO_1;

 	/* We set the high bit to flag that we need an update; don't
 	 * do the update here as we can be called with the bus lock
 	 * held.
 	 */
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		wm831x->gpio_update[irq] = 0x10000;
 		break;
 	default:
 		return -EINVAL;
 	}

 	return 0;
 }

 static struct irq_chip wm831x_irq_chip = {
 	.name			= "wm831x",
 	.irq_bus_lock		= wm831x_irq_lock,
 	.irq_bus_sync_unlock	= wm831x_irq_sync_unlock,
 	.irq_disable		= wm831x_irq_disable,
 	.irq_enable		= wm831x_irq_enable,
 	.irq_set_type		= wm831x_irq_set_type,
 };

 /* The processing of the primary interrupt occurs in a thread so that
  * we can interact with the device over I2C or SPI. */
 static irqreturn_t wm831x_irq_thread(int irq, void *data)
 {
 	struct wm831x *wm831x = data;
 	unsigned int i;
 	int primary, status_addr;
 	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
 	int read[WM831X_NUM_IRQ_REGS] = { 0 };
 	int *status;

 	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
 	if (primary < 0) {
 		dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
 			primary);
 		goto out;
 	}

 	/* The touch interrupts are visible in the primary register as
 	 * an optimisation; open code this to avoid complicating the
 	 * main handling loop and so we can also skip iterating the
 	 * descriptors.
 	 */
 	if (primary & WM831X_TCHPD_INT)
 		handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHPD);
 	if (primary & WM831X_TCHDATA_INT)
 		handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHDATA);
 	if (primary & (WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT))
 		goto out;

 	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
 		int offset = wm831x_irqs[i].reg - 1;

 		if (!(primary & wm831x_irqs[i].primary))
 			continue;

 		status = &status_regs[offset];

 		/* Hopefully there should only be one register to read
 		 * each time otherwise we ought to do a block read. */
 		if (!read[offset]) {
 			status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);

 			*status = wm831x_reg_read(wm831x, status_addr);
 			if (*status < 0) {
 				dev_err(wm831x->dev,
 					"Failed to read IRQ status: %d\n",
 					*status);
 				goto out;
 			}

 			read[offset] = 1;

 			/* Ignore any bits that we don't think are masked */
 			*status &= ~wm831x->irq_masks_cur[offset];

 			/* Acknowledge now so we don't miss
 			 * notifications while we handle.
 			 */
 			wm831x_reg_write(wm831x, status_addr, *status);
 		}

 		if (*status & wm831x_irqs[i].mask)
 			handle_nested_irq(wm831x->irq_base + i);
 	}

 out:
 	return IRQ_HANDLED;
 }

 int wm831x_irq_init(struct wm831x *wm831x, int irq)
 {
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
 	int i, cur_irq, ret;

 	mutex_init(&wm831x->irq_lock);

 	/* Mask the individual interrupt sources */
 	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
 		wm831x->irq_masks_cur[i] = 0xffff;
 		wm831x->irq_masks_cache[i] = 0xffff;
 		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
 				 0xffff);
 	}

 	/* Try to dynamically allocate IRQs if no base is specified */
 	if (!pdata || !pdata->irq_base)
 		wm831x->irq_base = -1;
 	else
 		wm831x->irq_base = pdata->irq_base;

 	wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0,
 					   WM831X_NUM_IRQS, 0);
 	if (wm831x->irq_base < 0) {
 		dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n",
 			 wm831x->irq_base);
 		wm831x->irq_base = 0;
 		return 0;
 	}

 	if (pdata && pdata->irq_cmos)
 		i = 0;
 	else
 		i = WM831X_IRQ_OD;

 	wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
 			WM831X_IRQ_OD, i);

 	/* Try to flag /IRQ as a wake source; there are a number of
 	 * unconditional wake sources in the PMIC so this isn't
 	 * conditional but we don't actually care *too* much if it
 	 * fails.
 	 */
 	ret = enable_irq_wake(irq);
 	if (ret != 0) {
 		dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n",
 			 ret);
 	}

 	wm831x->irq = irq;

 	/* Register them with genirq */
 	for (cur_irq = wm831x->irq_base;
 	     cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
 	     cur_irq++) {
 		irq_set_chip_data(cur_irq, wm831x);
 		irq_set_chip_and_handler(cur_irq, &wm831x_irq_chip,
 					 handle_edge_irq);
 		irq_set_nested_thread(cur_irq, 1);

 		/* ARM needs us to explicitly flag the IRQ as valid
 		 * and will set them noprobe when we do so. */
 #ifdef CONFIG_ARM
 		set_irq_flags(cur_irq, IRQF_VALID);
 #else
 		irq_set_noprobe(cur_irq);
 #endif
 	}

 	if (irq) {
 		ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
 					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 					   "wm831x", wm831x);
 		if (ret != 0) {
 			dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
 				irq, ret);
 			return ret;
 		}
 	} else {
 		dev_warn(wm831x->dev,
 			 "No interrupt specified - functionality limited\n");
 	}


 	/* Enable top level interrupts, we mask at secondary level */
 	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);

 	return 0;
 }

 void wm831x_irq_exit(struct wm831x *wm831x)
 {
 	if (wm831x->irq)
 		free_irq(wm831x->irq, wm831x);
 }
	/*
	* wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
	*
	* Copyright 2009 Wolfson Microelectronics PLC.
	*
	* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/i2c.h>
	#include <linux/irq.h>
	#include <linux/mfd/core.h>
	#include <linux/interrupt.h>

	#include <linux/mfd/wm831x/core.h>
	#include <linux/mfd/wm831x/pdata.h>
	#include <linux/mfd/wm831x/gpio.h>
	#include <linux/mfd/wm831x/irq.h>

	#include <linux/delay.h>

	struct wm831x_irq_data {
	int primary;
	int reg;
	int mask;
	};

	static struct wm831x_irq_data wm831x_irqs[] = {
	[WM831X_IRQ_TEMP_THW] = {
	.primary = WM831X_TEMP_INT,
	.reg = 1,
	.mask = WM831X_TEMP_THW_EINT,
	},
	[WM831X_IRQ_GPIO_1] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP1_EINT,
	},
	[WM831X_IRQ_GPIO_2] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP2_EINT,
	},
	[WM831X_IRQ_GPIO_3] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP3_EINT,
	},
	[WM831X_IRQ_GPIO_4] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP4_EINT,
	},
	[WM831X_IRQ_GPIO_5] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP5_EINT,
	},
	[WM831X_IRQ_GPIO_6] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP6_EINT,
	},
	[WM831X_IRQ_GPIO_7] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP7_EINT,
	},
	[WM831X_IRQ_GPIO_8] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP8_EINT,
	},
	[WM831X_IRQ_GPIO_9] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP9_EINT,
	},
	[WM831X_IRQ_GPIO_10] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP10_EINT,
	},
	[WM831X_IRQ_GPIO_11] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP11_EINT,
	},
	[WM831X_IRQ_GPIO_12] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP12_EINT,
	},
	[WM831X_IRQ_GPIO_13] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP13_EINT,
	},
	[WM831X_IRQ_GPIO_14] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP14_EINT,
	},
	[WM831X_IRQ_GPIO_15] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP15_EINT,
	},
	[WM831X_IRQ_GPIO_16] = {
	.primary = WM831X_GP_INT,
	.reg = 5,
	.mask = WM831X_GP16_EINT,
	},
	[WM831X_IRQ_ON] = {
	.primary = WM831X_ON_PIN_INT,
	.reg = 1,
	.mask = WM831X_ON_PIN_EINT,
	},
	[WM831X_IRQ_PPM_SYSLO] = {
	.primary = WM831X_PPM_INT,
	.reg = 1,
	.mask = WM831X_PPM_SYSLO_EINT,
	},
	[WM831X_IRQ_PPM_PWR_SRC] = {
	.primary = WM831X_PPM_INT,
	.reg = 1,
	.mask = WM831X_PPM_PWR_SRC_EINT,
	},
	[WM831X_IRQ_PPM_USB_CURR] = {
	.primary = WM831X_PPM_INT,
	.reg = 1,
	.mask = WM831X_PPM_USB_CURR_EINT,
	},
	[WM831X_IRQ_WDOG_TO] = {
	.primary = WM831X_WDOG_INT,
	.reg = 1,
	.mask = WM831X_WDOG_TO_EINT,
	},
	[WM831X_IRQ_RTC_PER] = {
	.primary = WM831X_RTC_INT,
	.reg = 1,
	.mask = WM831X_RTC_PER_EINT,
	},
	[WM831X_IRQ_RTC_ALM] = {
	.primary = WM831X_RTC_INT,
	.reg = 1,
	.mask = WM831X_RTC_ALM_EINT,
	},
	[WM831X_IRQ_CHG_BATT_HOT] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_BATT_HOT_EINT,
	},
	[WM831X_IRQ_CHG_BATT_COLD] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_BATT_COLD_EINT,
	},
	[WM831X_IRQ_CHG_BATT_FAIL] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_BATT_FAIL_EINT,
	},
	[WM831X_IRQ_CHG_OV] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_OV_EINT,
	},
	[WM831X_IRQ_CHG_END] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_END_EINT,
	},
	[WM831X_IRQ_CHG_TO] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_TO_EINT,
	},
	[WM831X_IRQ_CHG_MODE] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_MODE_EINT,
	},
	[WM831X_IRQ_CHG_START] = {
	.primary = WM831X_CHG_INT,
	.reg = 2,
	.mask = WM831X_CHG_START_EINT,
	},
	[WM831X_IRQ_TCHDATA] = {
	.primary = WM831X_TCHDATA_INT,
	.reg = 1,
	.mask = WM831X_TCHDATA_EINT,
	},
	[WM831X_IRQ_TCHPD] = {
	.primary = WM831X_TCHPD_INT,
	.reg = 1,
	.mask = WM831X_TCHPD_EINT,
	},
	[WM831X_IRQ_AUXADC_DATA] = {
	.primary = WM831X_AUXADC_INT,
	.reg = 1,
	.mask = WM831X_AUXADC_DATA_EINT,
	},
	[WM831X_IRQ_AUXADC_DCOMP1] = {
	.primary = WM831X_AUXADC_INT,
	.reg = 1,
	.mask = WM831X_AUXADC_DCOMP1_EINT,
	},
	[WM831X_IRQ_AUXADC_DCOMP2] = {
	.primary = WM831X_AUXADC_INT,
	.reg = 1,
	.mask = WM831X_AUXADC_DCOMP2_EINT,
	},
	[WM831X_IRQ_AUXADC_DCOMP3] = {
	.primary = WM831X_AUXADC_INT,
	.reg = 1,
	.mask = WM831X_AUXADC_DCOMP3_EINT,
	},
	[WM831X_IRQ_AUXADC_DCOMP4] = {
	.primary = WM831X_AUXADC_INT,
	.reg = 1,
	.mask = WM831X_AUXADC_DCOMP4_EINT,
	},
	[WM831X_IRQ_CS1] = {
	.primary = WM831X_CS_INT,
	.reg = 2,
	.mask = WM831X_CS1_EINT,
	},
	[WM831X_IRQ_CS2] = {
	.primary = WM831X_CS_INT,
	.reg = 2,
	.mask = WM831X_CS2_EINT,
	},
	[WM831X_IRQ_HC_DC1] = {
	.primary = WM831X_HC_INT,
	.reg = 4,
	.mask = WM831X_HC_DC1_EINT,
	},
	[WM831X_IRQ_HC_DC2] = {
	.primary = WM831X_HC_INT,
	.reg = 4,
	.mask = WM831X_HC_DC2_EINT,
	},
	[WM831X_IRQ_UV_LDO1] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO1_EINT,
	},
	[WM831X_IRQ_UV_LDO2] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO2_EINT,
	},
	[WM831X_IRQ_UV_LDO3] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO3_EINT,
	},
	[WM831X_IRQ_UV_LDO4] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO4_EINT,
	},
	[WM831X_IRQ_UV_LDO5] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO5_EINT,
	},
	[WM831X_IRQ_UV_LDO6] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO6_EINT,
	},
	[WM831X_IRQ_UV_LDO7] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO7_EINT,
	},
	[WM831X_IRQ_UV_LDO8] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO8_EINT,
	},
	[WM831X_IRQ_UV_LDO9] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO9_EINT,
	},
	[WM831X_IRQ_UV_LDO10] = {
	.primary = WM831X_UV_INT,
	.reg = 3,
	.mask = WM831X_UV_LDO10_EINT,
	},
	[WM831X_IRQ_UV_DC1] = {
	.primary = WM831X_UV_INT,
	.reg = 4,
	.mask = WM831X_UV_DC1_EINT,
	},
	[WM831X_IRQ_UV_DC2] = {
	.primary = WM831X_UV_INT,
	.reg = 4,
	.mask = WM831X_UV_DC2_EINT,
	},
	[WM831X_IRQ_UV_DC3] = {
	.primary = WM831X_UV_INT,
	.reg = 4,
	.mask = WM831X_UV_DC3_EINT,
	},
	[WM831X_IRQ_UV_DC4] = {
	.primary = WM831X_UV_INT,
	.reg = 4,
	.mask = WM831X_UV_DC4_EINT,
	},
	};

	static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
	{
	return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
	}

	static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
	{
	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
	}

	static inline struct wm831x_irq_data irq_to_wm831x_irq(struct wm831x wm831x,
	int irq)
	{
	return &wm831x_irqs[irq - wm831x->irq_base];
	}

	static void wm831x_irq_lock(struct irq_data *data)
	{
	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);

	mutex_lock(&wm831x->irq_lock);
	}

	static void wm831x_irq_sync_unlock(struct irq_data *data)
	{
	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
	int i;

	for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
	if (wm831x->gpio_update[i]) {
	wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
	WM831X_GPN_INT_MODE \| WM831X_GPN_POL,
	wm831x->gpio_update[i]);
	wm831x->gpio_update[i] = 0;
	}
	}

	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
	/* If there's been a change in the mask write it back
	* to the hardware. */
	if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
	dev_dbg(wm831x->dev, "IRQ mask sync: %x = %x\n",
	WM831X_INTERRUPT_STATUS_1_MASK + i,
	wm831x->irq_masks_cur[i]);

	wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
	wm831x_reg_write(wm831x,
	WM831X_INTERRUPT_STATUS_1_MASK + i,
	wm831x->irq_masks_cur[i]);
	}
	}

	mutex_unlock(&wm831x->irq_lock);
	}

	static void wm831x_irq_enable(struct irq_data *data)
	{
	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
	data->irq);

	wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
	}

	static void wm831x_irq_disable(struct irq_data *data)
	{
	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
	data->irq);

	wm831x->irq_masks_cur[irq_data->reg - 1] \|= irq_data->mask;
	}

	static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
	{
	struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
	int irq;

	irq = data->irq - wm831x->irq_base;

	if (irq < WM831X_IRQ_GPIO_1 \|\| irq > WM831X_IRQ_GPIO_11) {
	/* Ignore internal-only IRQs */
	if (irq >= 0 && irq < WM831X_NUM_IRQS)
	return 0;
	else
	return -EINVAL;
	}

	/* Rebase the IRQ into the GPIO range so we've got a sensible array
	* index.
	*/
	irq -= WM831X_IRQ_GPIO_1;

	/* We set the high bit to flag that we need an update; don't
	* do the update here as we can be called with the bus lock
	* held.
	*/
	switch (type) {
	case IRQ_TYPE_EDGE_BOTH:
	wm831x->gpio_update[irq] = 0x10000 \| WM831X_GPN_INT_MODE;
	break;
	case IRQ_TYPE_EDGE_RISING:
	wm831x->gpio_update[irq] = 0x10000 \| WM831X_GPN_POL;
	break;
	case IRQ_TYPE_EDGE_FALLING:
	wm831x->gpio_update[irq] = 0x10000;
	break;
	default:
	return -EINVAL;
	}

	return 0;
	}

	static struct irq_chip wm831x_irq_chip = {
	.name = "wm831x",
	.irq_bus_lock = wm831x_irq_lock,
	.irq_bus_sync_unlock = wm831x_irq_sync_unlock,
	.irq_disable = wm831x_irq_disable,
	.irq_enable = wm831x_irq_enable,
	.irq_set_type = wm831x_irq_set_type,
	};

	/* The processing of the primary interrupt occurs in a thread so that
	* we can interact with the device over I2C or SPI. */
	static irqreturn_t wm831x_irq_thread(int irq, void *data)
	{
	struct wm831x *wm831x = data;
	unsigned int i;
	int primary, status_addr;
	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
	int read[WM831X_NUM_IRQ_REGS] = { 0 };
	int *status;

	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
	if (primary < 0) {
	dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
	primary);
	goto out;
	}

	/* The touch interrupts are visible in the primary register as
	* an optimisation; open code this to avoid complicating the
	* main handling loop and so we can also skip iterating the
	* descriptors.
	*/
	if (primary & WM831X_TCHPD_INT)
	handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHPD);
	if (primary & WM831X_TCHDATA_INT)
	handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHDATA);
	if (primary & (WM831X_TCHDATA_EINT \| WM831X_TCHPD_EINT))
	goto out;

	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
	int offset = wm831x_irqs[i].reg - 1;

	if (!(primary & wm831x_irqs[i].primary))
	continue;

	status = &status_regs[offset];

	/* Hopefully there should only be one register to read
	* each time otherwise we ought to do a block read. */
	if (!read[offset]) {
	status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);

	*status = wm831x_reg_read(wm831x, status_addr);
	if (*status < 0) {
	dev_err(wm831x->dev,
	"Failed to read IRQ status: %d\n",
	*status);
	goto out;
	}

	read[offset] = 1;

	/* Ignore any bits that we don't think are masked */
	*status &= ~wm831x->irq_masks_cur[offset];

	/* Acknowledge now so we don't miss
	* notifications while we handle.
	*/
	wm831x_reg_write(wm831x, status_addr, *status);
	}

	if (*status & wm831x_irqs[i].mask)
	handle_nested_irq(wm831x->irq_base + i);
	}

	out:
	return IRQ_HANDLED;
	}

	int wm831x_irq_init(struct wm831x *wm831x, int irq)
	{
	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
	int i, cur_irq, ret;

	mutex_init(&wm831x->irq_lock);

	/* Mask the individual interrupt sources */
	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
	wm831x->irq_masks_cur[i] = 0xffff;
	wm831x->irq_masks_cache[i] = 0xffff;
	wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
	0xffff);
	}

	/* Try to dynamically allocate IRQs if no base is specified */
	if (!pdata \|\| !pdata->irq_base)
	wm831x->irq_base = -1;
	else
	wm831x->irq_base = pdata->irq_base;

	wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0,
	WM831X_NUM_IRQS, 0);
	if (wm831x->irq_base < 0) {
	dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n",
	wm831x->irq_base);
	wm831x->irq_base = 0;
	return 0;
	}

	if (pdata && pdata->irq_cmos)
	i = 0;
	else
	i = WM831X_IRQ_OD;

	wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
	WM831X_IRQ_OD, i);

	/* Try to flag /IRQ as a wake source; there are a number of
	* unconditional wake sources in the PMIC so this isn't
	* conditional but we don't actually care too much if it
	* fails.
	*/
	ret = enable_irq_wake(irq);
	if (ret != 0) {
	dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n",
	ret);
	}

	wm831x->irq = irq;

	/* Register them with genirq */
	for (cur_irq = wm831x->irq_base;
	cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
	cur_irq++) {
	irq_set_chip_data(cur_irq, wm831x);
	irq_set_chip_and_handler(cur_irq, &wm831x_irq_chip,
	handle_edge_irq);
	irq_set_nested_thread(cur_irq, 1);

	/* ARM needs us to explicitly flag the IRQ as valid
	* and will set them noprobe when we do so. */
	#ifdef CONFIG_ARM
	set_irq_flags(cur_irq, IRQF_VALID);
	#else
	irq_set_noprobe(cur_irq);
	#endif
	}

	if (irq) {
	ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
	IRQF_TRIGGER_LOW \| IRQF_ONESHOT,
	"wm831x", wm831x);
	if (ret != 0) {
	dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
	irq, ret);
	return ret;
	}
	} else {
	dev_warn(wm831x->dev,
	"No interrupt specified - functionality limited\n");
	}



	/* Enable top level interrupts, we mask at secondary level */
	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);

	return 0;
	}

	void wm831x_irq_exit(struct wm831x *wm831x)
	{
	if (wm831x->irq)
	free_irq(wm831x->irq, wm831x);
	}