drivers/i2c/busses/i2c-brcmstb.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation version 2.
  *
  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  * kind, whether express or implied; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/version.h>

 #define N_DATA_REGS					8

 /*
  * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register
  * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per
  * data register whereas STB SoCs use 4 byte per data register transfer,
  * account for this difference in total count per transaction and mask to
  * use.
  */
 #define BSC_CNT_REG1_MASK(nb)	(nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0))
 #define BSC_CNT_REG1_SHIFT	0

 /* BSC CTL register field definitions */
 #define BSC_CTL_REG_DTF_MASK				0x00000003
 #define BSC_CTL_REG_SCL_SEL_MASK			0x00000030
 #define BSC_CTL_REG_SCL_SEL_SHIFT			4
 #define BSC_CTL_REG_INT_EN_MASK				0x00000040
 #define BSC_CTL_REG_INT_EN_SHIFT			6
 #define BSC_CTL_REG_DIV_CLK_MASK			0x00000080

 /* BSC_IIC_ENABLE r/w enable and interrupt field definitions */
 #define BSC_IIC_EN_RESTART_MASK				0x00000040
 #define BSC_IIC_EN_NOSTART_MASK				0x00000020
 #define BSC_IIC_EN_NOSTOP_MASK				0x00000010
 #define BSC_IIC_EN_NOACK_MASK				0x00000004
 #define BSC_IIC_EN_INTRP_MASK				0x00000002
 #define BSC_IIC_EN_ENABLE_MASK				0x00000001

 /* BSC_CTLHI control register field definitions */
 #define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK	0x00000080
 #define BSC_CTLHI_REG_DATAREG_SIZE_MASK			0x00000040
 #define BSC_CTLHI_REG_IGNORE_ACK_MASK			0x00000002
 #define BSC_CTLHI_REG_WAIT_DIS_MASK			0x00000001

 #define I2C_TIMEOUT					100 /* msecs */

 /* Condition mask used for non combined transfer */
 #define COND_RESTART		BSC_IIC_EN_RESTART_MASK
 #define COND_NOSTART		BSC_IIC_EN_NOSTART_MASK
 #define COND_NOSTOP		BSC_IIC_EN_NOSTOP_MASK
 #define COND_START_STOP		(COND_RESTART | COND_NOSTART | COND_NOSTOP)

 /* BSC data transfer direction */
 #define DTF_WR_MASK		0x00000000
 #define DTF_RD_MASK		0x00000001
 /* BSC data transfer direction combined format */
 #define DTF_RD_WR_MASK		0x00000002
 #define DTF_WR_RD_MASK		0x00000003

 #define INT_ENABLE		true
 #define INT_DISABLE		false

 /* BSC block register map structure to cache fields to be written */
 struct bsc_regs {
 	u32	chip_address;           /* slave address */
 	u32	data_in[N_DATA_REGS];   /* tx data buffer*/
 	u32	cnt_reg;		/* rx/tx data length */
 	u32	ctl_reg;		/* control register */
 	u32	iic_enable;		/* xfer enable and status */
 	u32	data_out[N_DATA_REGS];  /* rx data buffer */
 	u32	ctlhi_reg;		/* more control fields */
 	u32	scl_param;		/* reserved */
 };

 struct bsc_clk_param {
 	u32 hz;
 	u32 scl_mask;
 	u32 div_mask;
 };

 enum bsc_xfer_cmd {
 	CMD_WR,
 	CMD_RD,
 	CMD_WR_NOACK,
 	CMD_RD_NOACK,
 };

 static char const *cmd_string[] = {
 	[CMD_WR] = "WR",
 	[CMD_RD] = "RD",
 	[CMD_WR_NOACK] = "WR NOACK",
 	[CMD_RD_NOACK] = "RD NOACK",
 };

 enum bus_speeds {
 	SPD_375K,
 	SPD_390K,
 	SPD_187K,
 	SPD_200K,
 	SPD_93K,
 	SPD_97K,
 	SPD_46K,
 	SPD_50K
 };

 static const struct bsc_clk_param bsc_clk[] = {
 	[SPD_375K] = {
 		.hz = 375000,
 		.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = 0
 	},
 	[SPD_390K] = {
 		.hz = 390000,
 		.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = 0
 	},
 	[SPD_187K] = {
 		.hz = 187500,
 		.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = 0
 	},
 	[SPD_200K] = {
 		.hz = 200000,
 		.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = 0
 	},
 	[SPD_93K]  = {
 		.hz = 93750,
 		.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
 	},
 	[SPD_97K]  = {
 		.hz = 97500,
 		.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
 	},
 	[SPD_46K]  = {
 		.hz = 46875,
 		.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
 	},
 	[SPD_50K]  = {
 		.hz = 50000,
 		.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
 		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
 	}
 };

 struct brcmstb_i2c_dev {
 	struct device *device;
 	void __iomem *base;
 	void __iomem *irq_base;
 	int irq;
 	struct bsc_regs *bsc_regmap;
 	struct i2c_adapter adapter;
 	struct completion done;
 	bool is_suspended;
 	u32 clk_freq_hz;
 	int data_regsz;
 };

 /* register accessors for both be and le cpu arch */
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define __bsc_readl(_reg) ioread32be(_reg)
 #define __bsc_writel(_val, _reg) iowrite32be(_val, _reg)
 #else
 #define __bsc_readl(_reg) ioread32(_reg)
 #define __bsc_writel(_val, _reg) iowrite32(_val, _reg)
 #endif

 #define bsc_readl(_dev, _reg)						\
 	__bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg))

 #define bsc_writel(_dev, _val, _reg)					\
 	__bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg))

 static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev)
 {
 	return (N_DATA_REGS * dev->data_regsz);
 }

 static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev)
 {
 	return dev->data_regsz;
 }

 static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev,
 					   bool int_en)
 {

 	if (int_en)
 		/* Enable BSC  CTL interrupt line */
 		dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK;
 	else
 		/* Disable BSC CTL interrupt line */
 		dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK;

 	barrier();
 	bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
 }

 static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
 {
 	struct brcmstb_i2c_dev *dev = devid;
 	u32 status_bsc_ctl = bsc_readl(dev, ctl_reg);
 	u32 status_iic_intrp = bsc_readl(dev, iic_enable);

 	dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n",
 		status_bsc_ctl, status_iic_intrp);

 	if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK))
 		return IRQ_NONE;

 	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
 	complete_all(&dev->done);

 	dev_dbg(dev->device, "isr handled");
 	return IRQ_HANDLED;
 }

 /* Wait for device to be ready */
 static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);

 	while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) {
 		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
 		cpu_relax();
 	}
 	return 0;
 }

 /* i2c xfer completion function, handles both irq and polling mode */
 static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
 {
 	int ret = 0;
 	unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);

 	if (dev->irq >= 0) {
 		if (!wait_for_completion_timeout(&dev->done, timeout))
 			ret = -ETIMEDOUT;
 	} else {
 		/* we are in polling mode */
 		u32 bsc_intrp;
 		unsigned long time_left = jiffies + timeout;

 		do {
 			bsc_intrp = bsc_readl(dev, iic_enable) &
 				BSC_IIC_EN_INTRP_MASK;
 			if (time_after(jiffies, time_left)) {
 				ret = -ETIMEDOUT;
 				break;
 			}
 			cpu_relax();
 		} while (!bsc_intrp);
 	}

 	if (dev->irq < 0 || ret == -ETIMEDOUT)
 		brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);

 	return ret;
 }

 /* Set xfer START/STOP conditions for subsequent transfer */
 static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev,
 				       u32 cond_flag)
 {
 	u32 regval = dev->bsc_regmap->iic_enable;

 	dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag;
 }

 /* Send I2C request check completion */
 static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
 				enum bsc_xfer_cmd cmd)
 {
 	int rc = 0;
 	struct bsc_regs *pi2creg = dev->bsc_regmap;

 	/* Make sure the hardware is ready */
 	rc = brcmstb_i2c_wait_if_busy(dev);
 	if (rc < 0)
 		return rc;

 	/* only if we are in interrupt mode */
 	if (dev->irq >= 0)
 		reinit_completion(&dev->done);

 	/* enable BSC CTL interrupt line */
 	brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE);

 	/* initiate transfer by setting iic_enable */
 	pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK;
 	bsc_writel(dev, pi2creg->iic_enable, iic_enable);

 	/* Wait for transaction to finish or timeout */
 	rc = brcmstb_i2c_wait_for_completion(dev);
 	if (rc) {
 		dev_dbg(dev->device, "intr timeout for cmd %s\n",
 			cmd_string[cmd]);
 		goto cmd_out;
 	}

 	if ((CMD_RD || CMD_WR) &&
 	    bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
 		rc = -EREMOTEIO;
 		dev_dbg(dev->device, "controller received NOACK intr for %s\n",
 			cmd_string[cmd]);
 	}

 cmd_out:
 	bsc_writel(dev, 0, cnt_reg);
 	bsc_writel(dev, 0, iic_enable);

 	return rc;
 }

 /* Actual data transfer through the BSC master */
 static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
 				     u8 *buf, unsigned int len,
 				     struct i2c_msg *pmsg)
 {
 	int cnt, byte, i, rc;
 	enum bsc_xfer_cmd cmd;
 	u32 ctl_reg;
 	struct bsc_regs *pi2creg = dev->bsc_regmap;
 	int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
 	int data_regsz = brcmstb_i2c_get_data_regsz(dev);
 	int xfersz = brcmstb_i2c_get_xfersz(dev);

 	/* see if the transaction needs to check NACK conditions */
 	if (no_ack || len <= xfersz) {
 		cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
 			: CMD_WR_NOACK;
 		pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
 	} else {
 		cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR;
 		pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK;
 	}
 	bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg);

 	/* set data transfer direction */
 	ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK;
 	if (cmd == CMD_WR || cmd == CMD_WR_NOACK)
 		pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK;
 	else
 		pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK;

 	/* set the read/write length */
 	bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) &
 		   (len << BSC_CNT_REG1_SHIFT), cnt_reg);

 	/* Write data into data_in register */

 	if (cmd == CMD_WR || cmd == CMD_WR_NOACK) {
 		for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
 			u32 word = 0;

 			for (byte = 0; byte < data_regsz; byte++) {
 				word >>= BITS_PER_BYTE;
 				if ((cnt + byte) < len)
 					word |= buf[cnt + byte] <<
 					(BITS_PER_BYTE * (data_regsz - 1));
 			}
 			bsc_writel(dev, word, data_in[i]);
 		}
 	}

 	/* Initiate xfer, the function will return on completion */
 	rc = brcmstb_send_i2c_cmd(dev, cmd);

 	if (rc != 0) {
 		dev_dbg(dev->device, "%s failure", cmd_string[cmd]);
 		return rc;
 	}

 	/* Read data from data_out register */
 	if (cmd == CMD_RD || cmd == CMD_RD_NOACK) {
 		for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
 			u32 data = bsc_readl(dev, data_out[i]);

 			for (byte = 0; byte < data_regsz &&
 				     (byte + cnt) < len; byte++) {
 				buf[cnt + byte] = data & 0xff;
 				data >>= BITS_PER_BYTE;
 			}
 		}
 	}

 	return 0;
 }

 /* Write a single byte of data to the i2c bus */
 static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev,
 				       u8 *buf, unsigned int nak_expected)
 {
 	enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK;

 	bsc_writel(dev, 1, cnt_reg);
 	bsc_writel(dev, *buf, data_in);

 	return brcmstb_send_i2c_cmd(dev, cmd);
 }

 /* Send i2c address */
 static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
 			       struct i2c_msg *msg)
 {
 	unsigned char addr;

 	if (msg->flags & I2C_M_TEN) {
 		/* First byte is 11110XX0 where XX is upper 2 bits */
 		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
 		bsc_writel(dev, addr, chip_address);

 		/* Second byte is the remaining 8 bits */
 		addr = msg->addr & 0xFF;
 		if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
 			return -EREMOTEIO;

 		if (msg->flags & I2C_M_RD) {
 			/* For read, send restart without stop condition */
 			brcmstb_set_i2c_start_stop(dev, COND_RESTART
 						   | COND_NOSTOP);
 			/* Then re-send the first byte with the read bit set */
 			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
 			if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
 				return -EREMOTEIO;

 		}
 	} else {
 		addr = msg->addr << 1;
 		if (msg->flags & I2C_M_RD)
 			addr |= 1;

 		bsc_writel(dev, addr, chip_address);
 	}

 	return 0;
 }

 /* Master transfer function */
 static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
 			    struct i2c_msg msgs[], int num)
 {
 	struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
 	struct i2c_msg *pmsg;
 	int rc = 0;
 	int i;
 	int bytes_to_xfer;
 	u8 *tmp_buf;
 	int len = 0;
 	int xfersz = brcmstb_i2c_get_xfersz(dev);

 	if (dev->is_suspended)
 		return -EBUSY;

 	/* Loop through all messages */
 	for (i = 0; i < num; i++) {
 		pmsg = &msgs[i];
 		len = pmsg->len;
 		tmp_buf = pmsg->buf;

 		dev_dbg(dev->device,
 			"msg# %d/%d flg %x buf %x len %d\n", i,
 			num - 1, pmsg->flags,
 			pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);

 		if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
 			brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP));
 		else
 			brcmstb_set_i2c_start_stop(dev,
 						   COND_RESTART | COND_NOSTOP);

 		/* Send slave address */
 		if (!(pmsg->flags & I2C_M_NOSTART)) {
 			rc = brcmstb_i2c_do_addr(dev, pmsg);
 			if (rc < 0) {
 				dev_dbg(dev->device,
 					"NACK for addr %2.2x msg#%d rc = %d\n",
 					pmsg->addr, i, rc);
 				goto out;
 			}
 		}

 		/* Perform data transfer */
 		while (len) {
 			bytes_to_xfer = min(len, xfersz);

 			if (len <= xfersz && i == (num - 1))
 				brcmstb_set_i2c_start_stop(dev,
 							   ~(COND_START_STOP));

 			rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
 						       bytes_to_xfer, pmsg);
 			if (rc < 0)
 				goto out;

 			len -=  bytes_to_xfer;
 			tmp_buf += bytes_to_xfer;
 		}
 	}

 	rc = num;
 out:
 	return rc;

 }

 static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
 		| I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING;
 }

 static const struct i2c_algorithm brcmstb_i2c_algo = {
 	.master_xfer = brcmstb_i2c_xfer,
 	.functionality = brcmstb_i2c_functionality,
 };

 static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev)
 {
 	int i = 0, num_speeds = ARRAY_SIZE(bsc_clk);
 	u32 clk_freq_hz = dev->clk_freq_hz;

 	for (i = 0; i < num_speeds; i++) {
 		if (bsc_clk[i].hz == clk_freq_hz) {
 			dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK
 						| BSC_CTL_REG_DIV_CLK_MASK);
 			dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask |
 						     bsc_clk[i].div_mask);
 			bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
 			break;
 		}
 	}

 	/* in case we did not get find a valid speed */
 	if (i == num_speeds) {
 		i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >>
 			BSC_CTL_REG_SCL_SEL_SHIFT;
 		dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n",
 			bsc_clk[i].hz);
 	}
 }

 static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
 {
 	if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32))
 		/* set 4 byte data in/out xfers  */
 		dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK;
 	else
 		dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK;

 	bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg);
 	/* set bus speed */
 	brcmstb_i2c_set_bus_speed(dev);
 }

 static int brcmstb_i2c_probe(struct platform_device *pdev)
 {
 	int rc = 0;
 	struct brcmstb_i2c_dev *dev;
 	struct i2c_adapter *adap;
 	struct resource *iomem;
 	const char *int_name;

 	/* Allocate memory for private data structure */
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;

 	dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(struct bsc_regs *),
 				       GFP_KERNEL);
 	if (!dev->bsc_regmap)
 		return -ENOMEM;

 	platform_set_drvdata(pdev, dev);
 	dev->device = &pdev->dev;
 	init_completion(&dev->done);

 	/* Map hardware registers */
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(dev->device, iomem);
 	if (IS_ERR(dev->base)) {
 		rc = -ENOMEM;
 		goto probe_errorout;
 	}

 	rc = of_property_read_string(dev->device->of_node, "interrupt-names",
 				     &int_name);
 	if (rc < 0)
 		int_name = NULL;

 	/* Get the interrupt number */
 	dev->irq = platform_get_irq(pdev, 0);

 	/* disable the bsc interrupt line */
 	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);

 	/* register the ISR handler */
 	rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
 			      IRQF_SHARED,
 			      int_name ? int_name : pdev->name,
 			      dev);

 	if (rc) {
 		dev_dbg(dev->device, "falling back to polling mode");
 		dev->irq = -1;
 	}

 	if (of_property_read_u32(dev->device->of_node,
 				 "clock-frequency", &dev->clk_freq_hz)) {
 		dev_warn(dev->device, "setting clock-frequency@%dHz\n",
 			 bsc_clk[0].hz);
 		dev->clk_freq_hz = bsc_clk[0].hz;
 	}

 	/* set the data in/out register size for compatible SoCs */
 	if (of_device_is_compatible(dev->device->of_node,
 				    "brcmstb,brcmper-i2c"))
 		dev->data_regsz = sizeof(u8);
 	else
 		dev->data_regsz = sizeof(u32);

 	brcmstb_i2c_set_bsc_reg_defaults(dev);

 	/* Add the i2c adapter */
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
 	strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
 	if (int_name)
 		strlcat(adap->name, int_name, sizeof(adap->name));
 	adap->algo = &brcmstb_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 	rc = i2c_add_adapter(adap);
 	if (rc) {
 		dev_err(dev->device, "failed to add adapter\n");
 		goto probe_errorout;
 	}

 	dev_info(dev->device, "%s@%dhz registered in %s mode\n",
 		 int_name ? int_name : " ", dev->clk_freq_hz,
 		 (dev->irq >= 0) ? "interrupt" : "polling");

 	return 0;

 probe_errorout:
 	return rc;
 }

 static int brcmstb_i2c_remove(struct platform_device *pdev)
 {
 	struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev);

 	i2c_del_adapter(&dev->adapter);
 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 static int brcmstb_i2c_suspend(struct device *dev)
 {
 	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);

 	i2c_lock_adapter(&i2c_dev->adapter);
 	i2c_dev->is_suspended = true;
 	i2c_unlock_adapter(&i2c_dev->adapter);

 	return 0;
 }

 static int brcmstb_i2c_resume(struct device *dev)
 {
 	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);

 	i2c_lock_adapter(&i2c_dev->adapter);
 	brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
 	i2c_dev->is_suspended = false;
 	i2c_unlock_adapter(&i2c_dev->adapter);

 	return 0;
 }
 #endif

 static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
 			 brcmstb_i2c_resume);

 static const struct of_device_id brcmstb_i2c_of_match[] = {
 	{.compatible = "brcm,brcmstb-i2c"},
 	{.compatible = "brcm,brcmper-i2c"},
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);

 static struct platform_driver brcmstb_i2c_driver = {
 	.driver = {
 		   .name = "brcmstb-i2c",
 		   .of_match_table = brcmstb_i2c_of_match,
 		   .pm = &brcmstb_i2c_pm,
 		   },
 	.probe = brcmstb_i2c_probe,
 	.remove = brcmstb_i2c_remove,
 };
 module_platform_driver(brcmstb_i2c_driver);

 MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom Settop I2C Driver");
 MODULE_LICENSE("GPL v2");
	/*
	* Copyright (C) 2014 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation version 2.
	*
	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	* kind, whether express or implied; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/i2c.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/sched.h>
	#include <linux/slab.h>
	#include <linux/version.h>

	#define N_DATA_REGS 8

	/*
	* PER_I2C/BSC count register mask depends on 1 byte/4 byte data register
	* size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per
	* data register whereas STB SoCs use 4 byte per data register transfer,
	* account for this difference in total count per transaction and mask to
	* use.
	*/
	#define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0))
	#define BSC_CNT_REG1_SHIFT 0

	/* BSC CTL register field definitions */
	#define BSC_CTL_REG_DTF_MASK 0x00000003
	#define BSC_CTL_REG_SCL_SEL_MASK 0x00000030
	#define BSC_CTL_REG_SCL_SEL_SHIFT 4
	#define BSC_CTL_REG_INT_EN_MASK 0x00000040
	#define BSC_CTL_REG_INT_EN_SHIFT 6
	#define BSC_CTL_REG_DIV_CLK_MASK 0x00000080

	/* BSC_IIC_ENABLE r/w enable and interrupt field definitions */
	#define BSC_IIC_EN_RESTART_MASK 0x00000040
	#define BSC_IIC_EN_NOSTART_MASK 0x00000020
	#define BSC_IIC_EN_NOSTOP_MASK 0x00000010
	#define BSC_IIC_EN_NOACK_MASK 0x00000004
	#define BSC_IIC_EN_INTRP_MASK 0x00000002
	#define BSC_IIC_EN_ENABLE_MASK 0x00000001

	/* BSC_CTLHI control register field definitions */
	#define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080
	#define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040
	#define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002
	#define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001

	#define I2C_TIMEOUT 100 /* msecs */

	/* Condition mask used for non combined transfer */
	#define COND_RESTART BSC_IIC_EN_RESTART_MASK
	#define COND_NOSTART BSC_IIC_EN_NOSTART_MASK
	#define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK
	#define COND_START_STOP (COND_RESTART \| COND_NOSTART \| COND_NOSTOP)

	/* BSC data transfer direction */
	#define DTF_WR_MASK 0x00000000
	#define DTF_RD_MASK 0x00000001
	/* BSC data transfer direction combined format */
	#define DTF_RD_WR_MASK 0x00000002
	#define DTF_WR_RD_MASK 0x00000003

	#define INT_ENABLE true
	#define INT_DISABLE false

	/* BSC block register map structure to cache fields to be written */
	struct bsc_regs {
	u32 chip_address; /* slave address */
	u32 data_in[N_DATA_REGS]; /* tx data buffer*/
	u32 cnt_reg; /* rx/tx data length */
	u32 ctl_reg; /* control register */
	u32 iic_enable; /* xfer enable and status */
	u32 data_out[N_DATA_REGS]; /* rx data buffer */
	u32 ctlhi_reg; /* more control fields */
	u32 scl_param; /* reserved */
	};

	struct bsc_clk_param {
	u32 hz;
	u32 scl_mask;
	u32 div_mask;
	};

	enum bsc_xfer_cmd {
	CMD_WR,
	CMD_RD,
	CMD_WR_NOACK,
	CMD_RD_NOACK,
	};

	static char const *cmd_string[] = {
	[CMD_WR] = "WR",
	[CMD_RD] = "RD",
	[CMD_WR_NOACK] = "WR NOACK",
	[CMD_RD_NOACK] = "RD NOACK",
	};

	enum bus_speeds {
	SPD_375K,
	SPD_390K,
	SPD_187K,
	SPD_200K,
	SPD_93K,
	SPD_97K,
	SPD_46K,
	SPD_50K
	};

	static const struct bsc_clk_param bsc_clk[] = {
	[SPD_375K] = {
	.hz = 375000,
	.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = 0
	},
	[SPD_390K] = {
	.hz = 390000,
	.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = 0
	},
	[SPD_187K] = {
	.hz = 187500,
	.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = 0
	},
	[SPD_200K] = {
	.hz = 200000,
	.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = 0
	},
	[SPD_93K] = {
	.hz = 93750,
	.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = BSC_CTL_REG_DIV_CLK_MASK
	},
	[SPD_97K] = {
	.hz = 97500,
	.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = BSC_CTL_REG_DIV_CLK_MASK
	},
	[SPD_46K] = {
	.hz = 46875,
	.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = BSC_CTL_REG_DIV_CLK_MASK
	},
	[SPD_50K] = {
	.hz = 50000,
	.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
	.div_mask = BSC_CTL_REG_DIV_CLK_MASK
	}
	};

	struct brcmstb_i2c_dev {
	struct device *device;
	void __iomem *base;
	void __iomem *irq_base;
	int irq;
	struct bsc_regs *bsc_regmap;
	struct i2c_adapter adapter;
	struct completion done;
	bool is_suspended;
	u32 clk_freq_hz;
	int data_regsz;
	};

	/* register accessors for both be and le cpu arch */
	#ifdef CONFIG_CPU_BIG_ENDIAN
	#define __bsc_readl(_reg) ioread32be(_reg)
	#define __bsc_writel(_val, _reg) iowrite32be(_val, _reg)
	#else
	#define __bsc_readl(_reg) ioread32(_reg)
	#define __bsc_writel(_val, _reg) iowrite32(_val, _reg)
	#endif

	#define bsc_readl(_dev, _reg) \
	__bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg))

	#define bsc_writel(_dev, _val, _reg) \
	__bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg))

	static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev)
	{
	return (N_DATA_REGS * dev->data_regsz);
	}

	static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev)
	{
	return dev->data_regsz;
	}

	static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev,
	bool int_en)
	{

	if (int_en)
	/* Enable BSC CTL interrupt line */
	dev->bsc_regmap->ctl_reg \|= BSC_CTL_REG_INT_EN_MASK;
	else
	/* Disable BSC CTL interrupt line */
	dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK;

	barrier();
	bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
	}

	static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
	{
	struct brcmstb_i2c_dev *dev = devid;
	u32 status_bsc_ctl = bsc_readl(dev, ctl_reg);
	u32 status_iic_intrp = bsc_readl(dev, iic_enable);

	dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n",
	status_bsc_ctl, status_iic_intrp);

	if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK))
	return IRQ_NONE;

	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
	complete_all(&dev->done);

	dev_dbg(dev->device, "isr handled");
	return IRQ_HANDLED;
	}

	/* Wait for device to be ready */
	static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev)
	{
	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);

	while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) {
	if (time_after(jiffies, timeout))
	return -ETIMEDOUT;
	cpu_relax();
	}
	return 0;
	}

	/* i2c xfer completion function, handles both irq and polling mode */
	static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
	{
	int ret = 0;
	unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);

	if (dev->irq >= 0) {
	if (!wait_for_completion_timeout(&dev->done, timeout))
	ret = -ETIMEDOUT;
	} else {
	/* we are in polling mode */
	u32 bsc_intrp;
	unsigned long time_left = jiffies + timeout;

	do {
	bsc_intrp = bsc_readl(dev, iic_enable) &
	BSC_IIC_EN_INTRP_MASK;
	if (time_after(jiffies, time_left)) {
	ret = -ETIMEDOUT;
	break;
	}
	cpu_relax();
	} while (!bsc_intrp);
	}

	if (dev->irq < 0 \|\| ret == -ETIMEDOUT)
	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);

	return ret;
	}

	/* Set xfer START/STOP conditions for subsequent transfer */
	static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev,
	u32 cond_flag)
	{
	u32 regval = dev->bsc_regmap->iic_enable;

	dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) \| cond_flag;
	}

	/* Send I2C request check completion */
	static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
	enum bsc_xfer_cmd cmd)
	{
	int rc = 0;
	struct bsc_regs *pi2creg = dev->bsc_regmap;

	/* Make sure the hardware is ready */
	rc = brcmstb_i2c_wait_if_busy(dev);
	if (rc < 0)
	return rc;

	/* only if we are in interrupt mode */
	if (dev->irq >= 0)
	reinit_completion(&dev->done);

	/* enable BSC CTL interrupt line */
	brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE);

	/* initiate transfer by setting iic_enable */
	pi2creg->iic_enable \|= BSC_IIC_EN_ENABLE_MASK;
	bsc_writel(dev, pi2creg->iic_enable, iic_enable);

	/* Wait for transaction to finish or timeout */
	rc = brcmstb_i2c_wait_for_completion(dev);
	if (rc) {
	dev_dbg(dev->device, "intr timeout for cmd %s\n",
	cmd_string[cmd]);
	goto cmd_out;
	}

	if ((CMD_RD \|\| CMD_WR) &&
	bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
	rc = -EREMOTEIO;
	dev_dbg(dev->device, "controller received NOACK intr for %s\n",
	cmd_string[cmd]);
	}

	cmd_out:
	bsc_writel(dev, 0, cnt_reg);
	bsc_writel(dev, 0, iic_enable);

	return rc;
	}

	/* Actual data transfer through the BSC master */
	static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
	u8 *buf, unsigned int len,
	struct i2c_msg *pmsg)
	{
	int cnt, byte, i, rc;
	enum bsc_xfer_cmd cmd;
	u32 ctl_reg;
	struct bsc_regs *pi2creg = dev->bsc_regmap;
	int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
	int data_regsz = brcmstb_i2c_get_data_regsz(dev);
	int xfersz = brcmstb_i2c_get_xfersz(dev);

	/* see if the transaction needs to check NACK conditions */
	if (no_ack \|\| len <= xfersz) {
	cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
	: CMD_WR_NOACK;
	pi2creg->ctlhi_reg \|= BSC_CTLHI_REG_IGNORE_ACK_MASK;
	} else {
	cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR;
	pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK;
	}
	bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg);

	/* set data transfer direction */
	ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK;
	if (cmd == CMD_WR \|\| cmd == CMD_WR_NOACK)
	pi2creg->ctl_reg = ctl_reg \| DTF_WR_MASK;
	else
	pi2creg->ctl_reg = ctl_reg \| DTF_RD_MASK;

	/* set the read/write length */
	bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) &
	(len << BSC_CNT_REG1_SHIFT), cnt_reg);

	/* Write data into data_in register */

	if (cmd == CMD_WR \|\| cmd == CMD_WR_NOACK) {
	for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
	u32 word = 0;

	for (byte = 0; byte < data_regsz; byte++) {
	word >>= BITS_PER_BYTE;
	if ((cnt + byte) < len)
	word \|= buf[cnt + byte] <<
	(BITS_PER_BYTE * (data_regsz - 1));
	}
	bsc_writel(dev, word, data_in[i]);
	}
	}

	/* Initiate xfer, the function will return on completion */
	rc = brcmstb_send_i2c_cmd(dev, cmd);

	if (rc != 0) {
	dev_dbg(dev->device, "%s failure", cmd_string[cmd]);
	return rc;
	}

	/* Read data from data_out register */
	if (cmd == CMD_RD \|\| cmd == CMD_RD_NOACK) {
	for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
	u32 data = bsc_readl(dev, data_out[i]);

	for (byte = 0; byte < data_regsz &&
	(byte + cnt) < len; byte++) {
	buf[cnt + byte] = data & 0xff;
	data >>= BITS_PER_BYTE;
	}
	}
	}

	return 0;
	}

	/* Write a single byte of data to the i2c bus */
	static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev,
	u8 *buf, unsigned int nak_expected)
	{
	enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK;

	bsc_writel(dev, 1, cnt_reg);
	bsc_writel(dev, *buf, data_in);

	return brcmstb_send_i2c_cmd(dev, cmd);
	}

	/* Send i2c address */
	static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
	struct i2c_msg *msg)
	{
	unsigned char addr;

	if (msg->flags & I2C_M_TEN) {
	/* First byte is 11110XX0 where XX is upper 2 bits */
	addr = 0xF0 \| ((msg->addr & 0x300) >> 7);
	bsc_writel(dev, addr, chip_address);

	/* Second byte is the remaining 8 bits */
	addr = msg->addr & 0xFF;
	if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
	return -EREMOTEIO;

	if (msg->flags & I2C_M_RD) {
	/* For read, send restart without stop condition */
	brcmstb_set_i2c_start_stop(dev, COND_RESTART
	\| COND_NOSTOP);
	/* Then re-send the first byte with the read bit set */
	addr = 0xF0 \| ((msg->addr & 0x300) >> 7) \| 0x01;
	if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
	return -EREMOTEIO;

	}
	} else {
	addr = msg->addr << 1;
	if (msg->flags & I2C_M_RD)
	addr \|= 1;

	bsc_writel(dev, addr, chip_address);
	}

	return 0;
	}

	/* Master transfer function */
	static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
	struct i2c_msg msgs[], int num)
	{
	struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
	struct i2c_msg *pmsg;
	int rc = 0;
	int i;
	int bytes_to_xfer;
	u8 *tmp_buf;
	int len = 0;
	int xfersz = brcmstb_i2c_get_xfersz(dev);

	if (dev->is_suspended)
	return -EBUSY;

	/* Loop through all messages */
	for (i = 0; i < num; i++) {
	pmsg = &msgs[i];
	len = pmsg->len;
	tmp_buf = pmsg->buf;

	dev_dbg(dev->device,
	"msg# %d/%d flg %x buf %x len %d\n", i,
	num - 1, pmsg->flags,
	pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);

	if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
	brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP));
	else
	brcmstb_set_i2c_start_stop(dev,
	COND_RESTART \| COND_NOSTOP);

	/* Send slave address */
	if (!(pmsg->flags & I2C_M_NOSTART)) {
	rc = brcmstb_i2c_do_addr(dev, pmsg);
	if (rc < 0) {
	dev_dbg(dev->device,
	"NACK for addr %2.2x msg#%d rc = %d\n",
	pmsg->addr, i, rc);
	goto out;
	}
	}

	/* Perform data transfer */
	while (len) {
	bytes_to_xfer = min(len, xfersz);

	if (len <= xfersz && i == (num - 1))
	brcmstb_set_i2c_start_stop(dev,
	~(COND_START_STOP));

	rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
	bytes_to_xfer, pmsg);
	if (rc < 0)
	goto out;

	len -= bytes_to_xfer;
	tmp_buf += bytes_to_xfer;
	}
	}

	rc = num;
	out:
	return rc;

	}

	static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
	{
	return I2C_FUNC_I2C \| I2C_FUNC_SMBUS_EMUL \| I2C_FUNC_10BIT_ADDR
	\| I2C_FUNC_NOSTART \| I2C_FUNC_PROTOCOL_MANGLING;
	}

	static const struct i2c_algorithm brcmstb_i2c_algo = {
	.master_xfer = brcmstb_i2c_xfer,
	.functionality = brcmstb_i2c_functionality,
	};

	static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev)
	{
	int i = 0, num_speeds = ARRAY_SIZE(bsc_clk);
	u32 clk_freq_hz = dev->clk_freq_hz;

	for (i = 0; i < num_speeds; i++) {
	if (bsc_clk[i].hz == clk_freq_hz) {
	dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK
	\| BSC_CTL_REG_DIV_CLK_MASK);
	dev->bsc_regmap->ctl_reg \|= (bsc_clk[i].scl_mask \|
	bsc_clk[i].div_mask);
	bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
	break;
	}
	}

	/* in case we did not get find a valid speed */
	if (i == num_speeds) {
	i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >>
	BSC_CTL_REG_SCL_SEL_SHIFT;
	dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n",
	bsc_clk[i].hz);
	}
	}

	static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
	{
	if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32))
	/* set 4 byte data in/out xfers */
	dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK;
	else
	dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK;

	bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg);
	/* set bus speed */
	brcmstb_i2c_set_bus_speed(dev);
	}

	static int brcmstb_i2c_probe(struct platform_device *pdev)
	{
	int rc = 0;
	struct brcmstb_i2c_dev *dev;
	struct i2c_adapter *adap;
	struct resource *iomem;
	const char *int_name;

	/* Allocate memory for private data structure */
	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
	if (!dev)
	return -ENOMEM;

	dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(struct bsc_regs *),
	GFP_KERNEL);
	if (!dev->bsc_regmap)
	return -ENOMEM;

	platform_set_drvdata(pdev, dev);
	dev->device = &pdev->dev;
	init_completion(&dev->done);

	/* Map hardware registers */
	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	dev->base = devm_ioremap_resource(dev->device, iomem);
	if (IS_ERR(dev->base)) {
	rc = -ENOMEM;
	goto probe_errorout;
	}

	rc = of_property_read_string(dev->device->of_node, "interrupt-names",
	&int_name);
	if (rc < 0)
	int_name = NULL;

	/* Get the interrupt number */
	dev->irq = platform_get_irq(pdev, 0);

	/* disable the bsc interrupt line */
	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);

	/* register the ISR handler */
	rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
	IRQF_SHARED,
	int_name ? int_name : pdev->name,
	dev);

	if (rc) {
	dev_dbg(dev->device, "falling back to polling mode");
	dev->irq = -1;
	}

	if (of_property_read_u32(dev->device->of_node,
	"clock-frequency", &dev->clk_freq_hz)) {
	dev_warn(dev->device, "setting clock-frequency@%dHz\n",
	bsc_clk[0].hz);
	dev->clk_freq_hz = bsc_clk[0].hz;
	}

	/* set the data in/out register size for compatible SoCs */
	if (of_device_is_compatible(dev->device->of_node,
	"brcmstb,brcmper-i2c"))
	dev->data_regsz = sizeof(u8);
	else
	dev->data_regsz = sizeof(u32);

	brcmstb_i2c_set_bsc_reg_defaults(dev);

	/* Add the i2c adapter */
	adap = &dev->adapter;
	i2c_set_adapdata(adap, dev);
	adap->owner = THIS_MODULE;
	strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
	if (int_name)
	strlcat(adap->name, int_name, sizeof(adap->name));
	adap->algo = &brcmstb_i2c_algo;
	adap->dev.parent = &pdev->dev;
	adap->dev.of_node = pdev->dev.of_node;
	rc = i2c_add_adapter(adap);
	if (rc) {
	dev_err(dev->device, "failed to add adapter\n");
	goto probe_errorout;
	}

	dev_info(dev->device, "%s@%dhz registered in %s mode\n",
	int_name ? int_name : " ", dev->clk_freq_hz,
	(dev->irq >= 0) ? "interrupt" : "polling");

	return 0;

	probe_errorout:
	return rc;
	}

	static int brcmstb_i2c_remove(struct platform_device *pdev)
	{
	struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev);

	i2c_del_adapter(&dev->adapter);
	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	static int brcmstb_i2c_suspend(struct device *dev)
	{
	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);

	i2c_lock_adapter(&i2c_dev->adapter);
	i2c_dev->is_suspended = true;
	i2c_unlock_adapter(&i2c_dev->adapter);

	return 0;
	}

	static int brcmstb_i2c_resume(struct device *dev)
	{
	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);

	i2c_lock_adapter(&i2c_dev->adapter);
	brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
	i2c_dev->is_suspended = false;
	i2c_unlock_adapter(&i2c_dev->adapter);

	return 0;
	}
	#endif

	static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
	brcmstb_i2c_resume);

	static const struct of_device_id brcmstb_i2c_of_match[] = {
	{.compatible = "brcm,brcmstb-i2c"},
	{.compatible = "brcm,brcmper-i2c"},
	{},
	};
	MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);

	static struct platform_driver brcmstb_i2c_driver = {
	.driver = {
	.name = "brcmstb-i2c",
	.of_match_table = brcmstb_i2c_of_match,
	.pm = &brcmstb_i2c_pm,
	},
	.probe = brcmstb_i2c_probe,
	.remove = brcmstb_i2c_remove,
	};
	module_platform_driver(brcmstb_i2c_driver);

	MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>");
	MODULE_DESCRIPTION("Broadcom Settop I2C Driver");
	MODULE_LICENSE("GPL v2");