/*
 *  linux/drivers/mmc/core/core.c
 *
 *  Copyright (C) 2003-2004 Russell King, All Rights Reserved.
 *  SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
 *  MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/devfreq.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/leds.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeup.h>
#include <linux/suspend.h>
#include <linux/fault-inject.h>
#include <linux/random.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/jiffies.h>

#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/slot-gpio.h>

#define CREATE_TRACE_POINTS
#include <trace/events/mmc.h>

#include "core.h"
#include "bus.h"
#include "host.h"
#include "sdio_bus.h"
#include "pwrseq.h"

#include "mmc_ops.h"
#include "sd_ops.h"
#include "sdio_ops.h"

/* If the device is not responding */
#define MMC_CORE_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */

/*
 * Background operations can take a long time, depending on the housekeeping
 * operations the card has to perform.
 */
#define MMC_BKOPS_MAX_TIMEOUT	(4 * 60 * 1000) /* max time to wait in ms */

/* The max erase timeout, used when host->max_busy_timeout isn't specified */
#define MMC_ERASE_TIMEOUT_MS	(60 * 1000) /* 60 s */

static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };

/*
 * Enabling software CRCs on the data blocks can be a significant (30%)
 * performance cost, and for other reasons may not always be desired.
 * So we allow it it to be disabled.
 */
bool use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);

static int mmc_schedule_delayed_work(struct delayed_work *work,
				     unsigned long delay)
{
	/*
	 * We use the system_freezable_wq, because of two reasons.
	 * First, it allows several works (not the same work item) to be
	 * executed simultaneously. Second, the queue becomes frozen when
	 * userspace becomes frozen during system PM.
	 */
	return queue_delayed_work(system_freezable_wq, work, delay);
}

#ifdef CONFIG_FAIL_MMC_REQUEST

/*
 * Internal function. Inject random data errors.
 * If mmc_data is NULL no errors are injected.
 */
static void mmc_should_fail_request(struct mmc_host *host,
				    struct mmc_request *mrq)
{
	struct mmc_command *cmd = mrq->cmd;
	struct mmc_data *data = mrq->data;
	static const int data_errors[] = {
		-ETIMEDOUT,
		-EILSEQ,
		-EIO,
	};

	if (!data)
		return;

	if (cmd->error || data->error ||
	    !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
		return;

	data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)];
	data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9;
	data->fault_injected = true;
}

#else /* CONFIG_FAIL_MMC_REQUEST */

static inline void mmc_should_fail_request(struct mmc_host *host,
					   struct mmc_request *mrq)
{
}

#endif /* CONFIG_FAIL_MMC_REQUEST */

static bool mmc_is_data_request(struct mmc_request *mmc_request)
{
	switch (mmc_request->cmd->opcode) {
	case MMC_READ_SINGLE_BLOCK:
	case MMC_READ_MULTIPLE_BLOCK:
	case MMC_WRITE_BLOCK:
	case MMC_WRITE_MULTIPLE_BLOCK:
		return true;
	default:
		return false;
	}
}

static void mmc_clk_scaling_start_busy(struct mmc_host *host, bool lock_needed)
{
	struct mmc_devfeq_clk_scaling *clk_scaling = &host->clk_scaling;

	if (!clk_scaling->enable)
		return;

	if (lock_needed)
		spin_lock_bh(&clk_scaling->lock);

	clk_scaling->start_busy = ktime_get();
	clk_scaling->is_busy_started = true;

	if (lock_needed)
		spin_unlock_bh(&clk_scaling->lock);
}

static void mmc_clk_scaling_stop_busy(struct mmc_host *host, bool lock_needed)
{
	struct mmc_devfeq_clk_scaling *clk_scaling = &host->clk_scaling;

	if (!clk_scaling->enable)
		return;

	if (lock_needed)
		spin_lock_bh(&clk_scaling->lock);

	if (!clk_scaling->is_busy_started) {
		WARN_ON(1);
		goto out;
	}

	clk_scaling->total_busy_time_us +=
		ktime_to_us(ktime_sub(ktime_get(),
			clk_scaling->start_busy));
	pr_debug("%s: accumulated busy time is %lu usec\n",
		mmc_hostname(host), clk_scaling->total_busy_time_us);
	clk_scaling->is_busy_started = false;

out:
	if (lock_needed)
		spin_unlock_bh(&clk_scaling->lock);
}

/**
 * mmc_cmdq_clk_scaling_start_busy() - start busy timer for data requests
 * @host: pointer to mmc host structure
 * @lock_needed: flag indication if locking is needed
 *
 * This function starts the busy timer in case it was not already started.
 */
void mmc_cmdq_clk_scaling_start_busy(struct mmc_host *host,
	bool lock_needed)
{
	if (!host->clk_scaling.enable)
		return;

	if (lock_needed)
		spin_lock_bh(&host->clk_scaling.lock);

	if (!host->clk_scaling.is_busy_started &&
		!test_bit(CMDQ_STATE_DCMD_ACTIVE,
			&host->cmdq_ctx.curr_state)) {
		host->clk_scaling.start_busy = ktime_get();
		host->clk_scaling.is_busy_started = true;
	}

	if (lock_needed)
		spin_unlock_bh(&host->clk_scaling.lock);
}
EXPORT_SYMBOL(mmc_cmdq_clk_scaling_start_busy);

/**
 * mmc_cmdq_clk_scaling_stop_busy() - stop busy timer for last data requests
 * @host: pointer to mmc host structure
 * @lock_needed: flag indication if locking is needed
 *
 * This function stops the busy timer in case it is the last data request.
 * In case the current request is not the last one, the busy time till
 * now will be accumulated and the counter will be restarted.
 */
void mmc_cmdq_clk_scaling_stop_busy(struct mmc_host *host,
	bool lock_needed, bool is_cmdq_dcmd)
{
	if (!host->clk_scaling.enable)
		return;

	if (lock_needed)
		spin_lock_bh(&host->clk_scaling.lock);

	/*
	 *  For CQ mode: In completion of DCMD request, start busy time in
	 *  case of pending data requests
	 */
	if (is_cmdq_dcmd) {
		if (host->cmdq_ctx.data_active_reqs) {
			host->clk_scaling.is_busy_started = true;
			host->clk_scaling.start_busy = ktime_get();
		}
		goto out;
	}

	host->clk_scaling.total_busy_time_us +=
		ktime_to_us(ktime_sub(ktime_get(),
			host->clk_scaling.start_busy));

	if (host->cmdq_ctx.data_active_reqs) {
		host->clk_scaling.is_busy_started = true;
		host->clk_scaling.start_busy = ktime_get();
	} else {
		host->clk_scaling.is_busy_started = false;
	}
out:
	if (lock_needed)
		spin_unlock_bh(&host->clk_scaling.lock);

}
EXPORT_SYMBOL(mmc_cmdq_clk_scaling_stop_busy);

/**
 * mmc_can_scale_clk() - Check clock scaling capability
 * @host: pointer to mmc host structure
 */
bool mmc_can_scale_clk(struct mmc_host *host)
{
	if (!host) {
		pr_err("bad host parameter\n");
		WARN_ON(1);
		return false;
	}

	return host->caps2 & MMC_CAP2_CLK_SCALE;
}
EXPORT_SYMBOL(mmc_can_scale_clk);

static int mmc_devfreq_get_dev_status(struct device *dev,
		struct devfreq_dev_status *status)
{
	struct mmc_host *host = container_of(dev, struct mmc_host, class_dev);
	struct mmc_devfeq_clk_scaling *clk_scaling;

	if (!host) {
		pr_err("bad host parameter\n");
		WARN_ON(1);
		return -EINVAL;
	}

	clk_scaling = &host->clk_scaling;

	if (!clk_scaling->enable)
		return 0;

	spin_lock_bh(&clk_scaling->lock);

	/* accumulate the busy time of ongoing work */
	memset(status, 0, sizeof(*status));
	if (clk_scaling->is_busy_started) {
		if (mmc_card_cmdq(host->card)) {
			/* the "busy-timer" will be restarted in case there
			 * are pending data requests */
			mmc_cmdq_clk_scaling_stop_busy(host, false, false);
		} else {
			mmc_clk_scaling_stop_busy(host, false);
			mmc_clk_scaling_start_busy(host, false);
		}
	}

	status->busy_time = clk_scaling->total_busy_time_us;
	status->total_time = ktime_to_us(ktime_sub(ktime_get(),
		clk_scaling->measure_interval_start));
	clk_scaling->total_busy_time_us = 0;
	status->current_frequency = clk_scaling->curr_freq;
	clk_scaling->measure_interval_start = ktime_get();

	pr_debug("%s: status: load = %lu%% - total_time=%lu busy_time = %lu, clk=%lu\n",
		mmc_hostname(host),
		(status->busy_time*100)/status->total_time,
		status->total_time, status->busy_time,
		status->current_frequency);

	spin_unlock_bh(&clk_scaling->lock);

	return 0;
}

static bool mmc_is_valid_state_for_clk_scaling(struct mmc_host *host)
{
	struct mmc_card *card = host->card;
	u32 status;

	/*
	 * If the current partition type is RPMB, clock switching may not
	 * work properly as sending tuning command (CMD21) is illegal in
	 * this mode.
	 */
	if (!card || (mmc_card_mmc(card) &&
			(card->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB ||
			mmc_card_doing_bkops(card))))
		return false;

	if (mmc_send_status(card, &status)) {
		pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
		return false;
	}

	return R1_CURRENT_STATE(status) == R1_STATE_TRAN;
}

int mmc_cmdq_halt_on_empty_queue(struct mmc_host *host)
{
	int err = 0;

	err = wait_event_interruptible(host->cmdq_ctx.queue_empty_wq,
				(!host->cmdq_ctx.active_reqs));
	if (host->cmdq_ctx.active_reqs) {
		pr_err("%s: %s: unexpected active requests (%lu)\n",
			mmc_hostname(host), __func__,
			host->cmdq_ctx.active_reqs);
		return -EPERM;
	}

	err = mmc_cmdq_halt(host, true);
	if (err) {
		pr_err("%s: %s: mmc_cmdq_halt failed (%d)\n",
		       mmc_hostname(host), __func__, err);
		goto out;
	}

out:
	return err;
}
EXPORT_SYMBOL(mmc_cmdq_halt_on_empty_queue);

int mmc_clk_update_freq(struct mmc_host *host,
		unsigned long freq, enum mmc_load state)
{
	int err = 0;
	bool cmdq_mode;

	if (!host) {
		pr_err("bad host parameter\n");
		WARN_ON(1);
		return -EINVAL;
	}

	mmc_host_clk_hold(host);
	cmdq_mode = mmc_card_cmdq(host->card);

	/* make sure the card supports the frequency we want */
	if (unlikely(freq > host->card->clk_scaling_highest)) {
		freq = host->card->clk_scaling_highest;
		pr_warn("%s: %s: frequency was overridden to %lu\n",
				mmc_hostname(host), __func__,
				host->card->clk_scaling_highest);
	}

	if (unlikely(freq < host->card->clk_scaling_lowest)) {
		freq = host->card->clk_scaling_lowest;
		pr_warn("%s: %s: frequency was overridden to %lu\n",
			mmc_hostname(host), __func__,
			host->card->clk_scaling_lowest);
	}

	if (freq == host->clk_scaling.curr_freq)
		goto out;

	if (host->ops->notify_load) {
		err = host->ops->notify_load(host, state);
		if (err) {
			pr_err("%s: %s: fail on notify_load\n",
				mmc_hostname(host), __func__);
			goto out;
		}
	}

	if (cmdq_mode) {
		err = mmc_cmdq_halt_on_empty_queue(host);
		if (err) {
			pr_err("%s: %s: failed halting queue (%d)\n",
				mmc_hostname(host), __func__, err);
			goto halt_failed;
		}
	}

	if (!mmc_is_valid_state_for_clk_scaling(host)) {
		pr_debug("%s: invalid state for clock scaling - skipping",
			mmc_hostname(host));
		goto invalid_state;
	}

	err = host->bus_ops->change_bus_speed(host, &freq);
	if (!err)
		host->clk_scaling.curr_freq = freq;
	else
		pr_err("%s: %s: failed (%d) at freq=%lu\n",
			mmc_hostname(host), __func__, err, freq);

invalid_state:
	if (cmdq_mode) {
		if (mmc_cmdq_halt(host, false))
			pr_err("%s: %s: cmdq unhalt failed\n",
			mmc_hostname(host), __func__);
	}

halt_failed:
	if (err) {
		/* restore previous state */
		if (host->ops->notify_load)
			if (host->ops->notify_load(host,
				host->clk_scaling.state))
				pr_err("%s: %s: fail on notify_load restore\n",
					mmc_hostname(host), __func__);
	}
out:
	mmc_host_clk_release(host);
	return err;
}
EXPORT_SYMBOL(mmc_clk_update_freq);

int mmc_recovery_fallback_lower_speed(struct mmc_host *host)
{
	int err = 0;
	if (!host->card)
		return -EINVAL;

	if (host->sdr104_wa && mmc_card_sd(host->card) &&
	    (host->ios.timing == MMC_TIMING_UHS_SDR104) &&
	    !host->card->sdr104_blocked) {
		pr_err("%s: %s: blocked SDR104, lower the bus-speed (SDR50 / DDR50)\n",
			mmc_hostname(host), __func__);
		mmc_host_clear_sdr104(host);
		err = mmc_hw_reset(host);
		host->card->sdr104_blocked = true;
	}
	if (err)
		pr_err("%s: %s: Fallback to lower speed mode failed with err=%d\n",
			mmc_hostname(host), __func__, err);

	return err;
}

static int mmc_devfreq_set_target(struct device *dev,
				unsigned long *freq, u32 devfreq_flags)
{
	struct mmc_host *host = container_of(dev, struct mmc_host, class_dev);
	struct mmc_devfeq_clk_scaling *clk_scaling;
	int err = 0;
	int abort;
	unsigned long pflags = current->flags;

	/* Ensure scaling would happen even in memory pressure conditions */
	current->flags |= PF_MEMALLOC;

	if (!(host && freq)) {
		pr_err("%s: unexpected host/freq parameter\n", __func__);
		err = -EINVAL;
		goto out;
	}

	clk_scaling = &host->clk_scaling;

	if (!clk_scaling->enable)
		goto out;

	pr_debug("%s: target freq = %lu (%s)\n", mmc_hostname(host),
		*freq, current->comm);

	if ((clk_scaling->curr_freq == *freq) ||
		clk_scaling->skip_clk_scale_freq_update)
		goto out;

	/* No need to scale the clocks if they are gated */
	if (!host->ios.clock)
		goto out;

	spin_lock_bh(&clk_scaling->lock);
	if (clk_scaling->clk_scaling_in_progress) {
		pr_debug("%s: clocks scaling is already in-progress by mmc thread\n",
			mmc_hostname(host));
		spin_unlock_bh(&clk_scaling->lock);
		goto out;
	}
	clk_scaling->need_freq_change = true;
	clk_scaling->target_freq = *freq;
	clk_scaling->state = *freq < clk_scaling->curr_freq ?
		MMC_LOAD_LOW : MMC_LOAD_HIGH;
	spin_unlock_bh(&clk_scaling->lock);

	abort = __mmc_claim_host(host, &clk_scaling->devfreq_abort);
	if (abort)
		goto out;

	if (mmc_card_sd(host->card) && host->card->sdr104_blocked)
		goto rel_host;

	/*
	 * In case we were able to claim host there is no need to
	 * defer the frequency change. It will be done now
	 */
	clk_scaling->need_freq_change = false;

	mmc_host_clk_hold(host);
	err = mmc_clk_update_freq(host, *freq, clk_scaling->state);
	if (err && err != -EAGAIN) {
		pr_err("%s: clock scale to %lu failed with error %d\n",
			mmc_hostname(host), *freq, err);
		err = mmc_recovery_fallback_lower_speed(host);
	} else {
		pr_debug("%s: clock change to %lu finished successfully (%s)\n",
			mmc_hostname(host), *freq, current->comm);
	}


	mmc_host_clk_release(host);
rel_host:
	mmc_release_host(host);
out:
	tsk_restore_flags(current, pflags, PF_MEMALLOC);
	return err;
}

/**
 * mmc_deferred_scaling() - scale clocks from data path (mmc thread context)
 * @host: pointer to mmc host structure
 *
 * This function does clock scaling in case "need_freq_change" flag was set
 * by the clock scaling logic.
 */
void mmc_deferred_scaling(struct mmc_host *host)
{
	unsigned long target_freq;
	int err;

	if (!host->clk_scaling.enable)
		return;

	if (mmc_card_sd(host->card) && host->card->sdr104_blocked)
		return;

	spin_lock_bh(&host->clk_scaling.lock);

	if (host->clk_scaling.clk_scaling_in_progress ||
		!(host->clk_scaling.need_freq_change)) {
		spin_unlock_bh(&host->clk_scaling.lock);
		return;
	}


	atomic_inc(&host->clk_scaling.devfreq_abort);
	target_freq = host->clk_scaling.target_freq;
	host->clk_scaling.clk_scaling_in_progress = true;
	host->clk_scaling.need_freq_change = false;
	spin_unlock_bh(&host->clk_scaling.lock);
	pr_debug("%s: doing deferred frequency change (%lu) (%s)\n",
				mmc_hostname(host),
				target_freq, current->comm);

	err = mmc_clk_update_freq(host, target_freq,
		host->clk_scaling.state);
	if (err && err != -EAGAIN) {
		pr_err("%s: failed on deferred scale clocks (%d)\n",
			mmc_hostname(host), err);
		mmc_recovery_fallback_lower_speed(host);
	} else {
		pr_debug("%s: clocks were successfully scaled to %lu (%s)\n",
			mmc_hostname(host),
			target_freq, current->comm);
	}
	host->clk_scaling.clk_scaling_in_progress = false;
	atomic_dec(&host->clk_scaling.devfreq_abort);
}
EXPORT_SYMBOL(mmc_deferred_scaling);

static int mmc_devfreq_create_freq_table(struct mmc_host *host)
{
	int i;
	struct mmc_devfeq_clk_scaling *clk_scaling = &host->clk_scaling;

	pr_debug("%s: supported: lowest=%lu, highest=%lu\n",
		mmc_hostname(host),
		host->card->clk_scaling_lowest,
		host->card->clk_scaling_highest);

	/*
	 * Create the frequency table and initialize it with default values.
	 * Initialize it with platform specific frequencies if the frequency
	 * table supplied by platform driver is present, otherwise initialize
	 * it with min and max frequencies supported by the card.
	 */
	if (!clk_scaling->freq_table) {
		if (clk_scaling->pltfm_freq_table_sz)
			clk_scaling->freq_table_sz =
				clk_scaling->pltfm_freq_table_sz;
		else
			clk_scaling->freq_table_sz = 2;

		clk_scaling->freq_table = kzalloc(
			(clk_scaling->freq_table_sz *
			sizeof(*(clk_scaling->freq_table))), GFP_KERNEL);
		if (!clk_scaling->freq_table)
			return -ENOMEM;

		if (clk_scaling->pltfm_freq_table) {
			memcpy(clk_scaling->freq_table,
				clk_scaling->pltfm_freq_table,
				(clk_scaling->pltfm_freq_table_sz *
				sizeof(*(clk_scaling->pltfm_freq_table))));
		} else {
			pr_debug("%s: no frequency table defined -  setting default\n",
				mmc_hostname(host));
			clk_scaling->freq_table[0] =
				host->card->clk_scaling_lowest;
			clk_scaling->freq_table[1] =
				host->card->clk_scaling_highest;
			goto out;
		}
	}

	if (host->card->clk_scaling_lowest >
		clk_scaling->freq_table[0])
		pr_debug("%s: frequency table undershot possible freq\n",
			mmc_hostname(host));

	for (i = 0; i < clk_scaling->freq_table_sz; i++) {
		if (clk_scaling->freq_table[i] <=
			host->card->clk_scaling_highest)
			continue;
		clk_scaling->freq_table[i] =
			host->card->clk_scaling_highest;
		clk_scaling->freq_table_sz = i + 1;
		pr_debug("%s: frequency table overshot possible freq (%d)\n",
				mmc_hostname(host), clk_scaling->freq_table[i]);
		break;
	}

out:
	/**
	 * devfreq requires unsigned long type freq_table while the
	 * freq_table in clk_scaling is un32. Here allocates an individual
	 * memory space for it and release it when exit clock scaling.
	 */
	clk_scaling->devfreq_profile.freq_table =  kzalloc(
			clk_scaling->freq_table_sz *
			sizeof(*(clk_scaling->devfreq_profile.freq_table)),
			GFP_KERNEL);
	if (!clk_scaling->devfreq_profile.freq_table)
		return -ENOMEM;
	clk_scaling->devfreq_profile.max_state = clk_scaling->freq_table_sz;

	for (i = 0; i < clk_scaling->freq_table_sz; i++) {
		clk_scaling->devfreq_profile.freq_table[i] =
			clk_scaling->freq_table[i];
		pr_debug("%s: freq[%d] = %u\n",
			mmc_hostname(host), i, clk_scaling->freq_table[i]);
	}

	return 0;
}

/**
 * mmc_init_devfreq_clk_scaling() - Initialize clock scaling
 * @host: pointer to mmc host structure
 *
 * Initialize clock scaling for supported hosts. It is assumed that the caller
 * ensure clock is running at maximum possible frequency before calling this
 * function. Shall use struct devfreq_simple_ondemand_data to configure
 * governor.
 */
int mmc_init_clk_scaling(struct mmc_host *host)
{
	int err;

	if (!host || !host->card) {
		pr_err("%s: unexpected host/card parameters\n",
			__func__);
		return -EINVAL;
	}

	if (!mmc_can_scale_clk(host) ||
		!host->bus_ops->change_bus_speed) {
		pr_debug("%s: clock scaling is not supported\n",
			mmc_hostname(host));
		return 0;
	}

	pr_debug("registering %s dev (%p) to devfreq",
		mmc_hostname(host),
		mmc_classdev(host));

	if (host->clk_scaling.devfreq) {
		pr_err("%s: dev is already registered for dev %p\n",
			mmc_hostname(host),
			mmc_dev(host));
		return -EPERM;
	}
	spin_lock_init(&host->clk_scaling.lock);
	atomic_set(&host->clk_scaling.devfreq_abort, 0);
	host->clk_scaling.curr_freq = host->ios.clock;
	host->clk_scaling.clk_scaling_in_progress = false;
	host->clk_scaling.need_freq_change = false;
	host->clk_scaling.is_busy_started = false;

	host->clk_scaling.devfreq_profile.polling_ms =
		host->clk_scaling.polling_delay_ms;
	host->clk_scaling.devfreq_profile.get_dev_status =
		mmc_devfreq_get_dev_status;
	host->clk_scaling.devfreq_profile.target = mmc_devfreq_set_target;
	host->clk_scaling.devfreq_profile.initial_freq = host->ios.clock;

	host->clk_scaling.ondemand_gov_data.simple_scaling = true;
	host->clk_scaling.ondemand_gov_data.upthreshold =
		host->clk_scaling.upthreshold;
	host->clk_scaling.ondemand_gov_data.downdifferential =
		host->clk_scaling.upthreshold - host->clk_scaling.downthreshold;

	err = mmc_devfreq_create_freq_table(host);
	if (err) {
		pr_err("%s: fail to create devfreq frequency table\n",
			mmc_hostname(host));
		return err;
	}

	pr_debug("%s: adding devfreq with: upthreshold=%u downthreshold=%u polling=%u\n",
		mmc_hostname(host),
		host->clk_scaling.ondemand_gov_data.upthreshold,
		host->clk_scaling.ondemand_gov_data.downdifferential,
		host->clk_scaling.devfreq_profile.polling_ms);
	host->clk_scaling.devfreq = devfreq_add_device(
		mmc_classdev(host),
		&host->clk_scaling.devfreq_profile,
		"simple_ondemand",
		&host->clk_scaling.ondemand_gov_data);
	if (!host->clk_scaling.devfreq) {
		pr_err("%s: unable to register with devfreq\n",
			mmc_hostname(host));
		return -EPERM;
	}

	pr_debug("%s: clk scaling is enabled for device %s (%p) with devfreq %p (clock = %uHz)\n",
		mmc_hostname(host),
		dev_name(mmc_classdev(host)),
		mmc_classdev(host),
		host->clk_scaling.devfreq,
		host->ios.clock);

	host->clk_scaling.enable = true;

	return err;
}
EXPORT_SYMBOL(mmc_init_clk_scaling);

/**
 * mmc_suspend_clk_scaling() - suspend clock scaling
 * @host: pointer to mmc host structure
 *
 * This API will suspend devfreq feature for the specific host.
 * The statistics collected by mmc will be cleared.
 * This function is intended to be called by the pm callbacks
 * (e.g. runtime_suspend, suspend) of the mmc device
 */
int mmc_suspend_clk_scaling(struct mmc_host *host)
{
	int err;

	if (!host) {
		WARN(1, "bad host parameter\n");
		return -EINVAL;
	}

	if (!mmc_can_scale_clk(host) || !host->clk_scaling.enable)
		return 0;

	if (!host->clk_scaling.devfreq) {
		pr_err("%s: %s: no devfreq is assosiated with this device\n",
			mmc_hostname(host), __func__);
		return -EPERM;
	}

	atomic_inc(&host->clk_scaling.devfreq_abort);
	wake_up(&host->wq);
	err = devfreq_suspend_device(host->clk_scaling.devfreq);
	if (err) {
		pr_err("%s: %s: failed to suspend devfreq\n",
			mmc_hostname(host), __func__);
		return err;
	}
	host->clk_scaling.enable = false;

	host->clk_scaling.total_busy_time_us = 0;

	pr_debug("%s: devfreq was removed\n", mmc_hostname(host));

	return 0;
}
EXPORT_SYMBOL(mmc_suspend_clk_scaling);

/**
 * mmc_resume_clk_scaling() - resume clock scaling
 * @host: pointer to mmc host structure
 *
 * This API will resume devfreq feature for the specific host.
 * This API is intended to be called by the pm callbacks
 * (e.g. runtime_suspend, suspend) of the mmc device
 */
int mmc_resume_clk_scaling(struct mmc_host *host)
{
	int err = 0;
	u32 max_clk_idx = 0;
	u32 devfreq_max_clk = 0;
	u32 devfreq_min_clk = 0;

	if (!host) {
		WARN(1, "bad host parameter\n");
		return -EINVAL;
	}

	if (!mmc_can_scale_clk(host))
		return 0;

	/*
	 * If clock scaling is already exited when resume is called, like
	 * during mmc shutdown, it is not an error and should not fail the
	 * API calling this.
	 */
	if (!host->clk_scaling.devfreq) {
		pr_warn("%s: %s: no devfreq is assosiated with this device\n",
			mmc_hostname(host), __func__);
		return 0;
	}

	atomic_set(&host->clk_scaling.devfreq_abort, 0);

	max_clk_idx = host->clk_scaling.freq_table_sz - 1;
	devfreq_max_clk = host->clk_scaling.freq_table[max_clk_idx];
	devfreq_min_clk = host->clk_scaling.freq_table[0];

	host->clk_scaling.curr_freq = devfreq_max_clk;
	if (host->ios.clock < host->clk_scaling.freq_table[max_clk_idx])
		host->clk_scaling.curr_freq = devfreq_min_clk;

	host->clk_scaling.clk_scaling_in_progress = false;
	host->clk_scaling.need_freq_change = false;

	err = devfreq_resume_device(host->clk_scaling.devfreq);
	if (err) {
		pr_err("%s: %s: failed to resume devfreq (%d)\n",
			mmc_hostname(host), __func__, err);
	} else {
		host->clk_scaling.enable = true;
		pr_debug("%s: devfreq resumed\n", mmc_hostname(host));
	}

	return err;
}
EXPORT_SYMBOL(mmc_resume_clk_scaling);

/**
 * mmc_exit_devfreq_clk_scaling() - Disable clock scaling
 * @host: pointer to mmc host structure
 *
 * Disable clock scaling permanently.
 */
int mmc_exit_clk_scaling(struct mmc_host *host)
{
	int err;

	if (!host) {
		pr_err("%s: bad host parameter\n", __func__);
		WARN_ON(1);
		return -EINVAL;
	}

	if (!mmc_can_scale_clk(host))
		return 0;

	if (!host->clk_scaling.devfreq) {
		pr_err("%s: %s: no devfreq is assosiated with this device\n",
			mmc_hostname(host), __func__);
		return -EPERM;
	}

	err = mmc_suspend_clk_scaling(host);
	if (err) {
		pr_err("%s: %s: fail to suspend clock scaling (%d)\n",
			mmc_hostname(host), __func__,  err);
		return err;
	}

	err = devfreq_remove_device(host->clk_scaling.devfreq);
	if (err) {
		pr_err("%s: remove devfreq failed (%d)\n",
			mmc_hostname(host), err);
		return err;
	}

	kfree(host->clk_scaling.devfreq_profile.freq_table);

	host->clk_scaling.devfreq = NULL;
	atomic_set(&host->clk_scaling.devfreq_abort, 1);

	kfree(host->clk_scaling.freq_table);
	host->clk_scaling.freq_table = NULL;

	pr_debug("%s: devfreq was removed\n", mmc_hostname(host));

	return 0;
}
EXPORT_SYMBOL(mmc_exit_clk_scaling);

static inline void mmc_complete_cmd(struct mmc_request *mrq)
{
	if (mrq->cap_cmd_during_tfr && !completion_done(&mrq->cmd_completion))
		complete_all(&mrq->cmd_completion);
}

void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq)
{
	if (!mrq->cap_cmd_during_tfr)
		return;

	mmc_complete_cmd(mrq);

	pr_debug("%s: cmd done, tfr ongoing (CMD%u)\n",
		 mmc_hostname(host), mrq->cmd->opcode);
}
EXPORT_SYMBOL(mmc_command_done);

/**
 *	mmc_request_done - finish processing an MMC request
 *	@host: MMC host which completed request
 *	@mrq: MMC request which request
 *
 *	MMC drivers should call this function when they have completed
 *	their processing of a request.
 */
void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
{
	struct mmc_command *cmd = mrq->cmd;
	int err = cmd->error;
#ifdef CONFIG_MMC_PERF_PROFILING
	ktime_t diff;
#endif

	if (host->clk_scaling.is_busy_started)
		mmc_clk_scaling_stop_busy(host, true);

	/* Flag re-tuning needed on CRC errors */
	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
	    (mrq->data && mrq->data->error == -EILSEQ) ||
	    (mrq->stop && mrq->stop->error == -EILSEQ)))
		mmc_retune_needed(host);

	if (err && cmd->retries && mmc_host_is_spi(host)) {
		if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
			cmd->retries = 0;
	}

	if (host->ongoing_mrq == mrq)
		host->ongoing_mrq = NULL;

	mmc_complete_cmd(mrq);

	trace_mmc_request_done(host, mrq);

	if (err && cmd->retries && !mmc_card_removed(host->card)) {
		/*
		 * Request starter must handle retries - see
		 * mmc_wait_for_req_done().
		 */
		if (mrq->done)
			mrq->done(mrq);
	} else {
		mmc_should_fail_request(host, mrq);

		if (!host->ongoing_mrq)
			led_trigger_event(host->led, LED_OFF);

		if (mrq->sbc) {
			pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
				mmc_hostname(host), mrq->sbc->opcode,
				mrq->sbc->error,
				mrq->sbc->resp[0], mrq->sbc->resp[1],
				mrq->sbc->resp[2], mrq->sbc->resp[3]);
		}

		pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
			mmc_hostname(host), cmd->opcode, err,
			cmd->resp[0], cmd->resp[1],
			cmd->resp[2], cmd->resp[3]);

		if (mrq->data) {
#ifdef CONFIG_MMC_PERF_PROFILING
			if (host->perf_enable) {
				diff = ktime_sub(ktime_get(), host->perf.start);
				if (mrq->data->flags == MMC_DATA_READ) {
					host->perf.rbytes_drv +=
							mrq->data->bytes_xfered;
					host->perf.rtime_drv =
						ktime_add(host->perf.rtime_drv,
							diff);
				} else {
					host->perf.wbytes_drv +=
						mrq->data->bytes_xfered;
					host->perf.wtime_drv =
						ktime_add(host->perf.wtime_drv,
							diff);
				}
			}
#endif
			pr_debug("%s:     %d bytes transferred: %d\n",
				mmc_hostname(host),
				mrq->data->bytes_xfered, mrq->data->error);
#ifdef CONFIG_BLOCK
			if (mrq->lat_hist_enabled) {
				ktime_t completion;
				u_int64_t delta_us;

				completion = ktime_get();
				delta_us = ktime_us_delta(completion,
							  mrq->io_start);
				blk_update_latency_hist(&host->io_lat_s,
					(mrq->data->flags & MMC_DATA_READ),
					delta_us);
			}
#endif
		}

		if (mrq->stop) {
			pr_debug("%s:     (CMD%u): %d: %08x %08x %08x %08x\n",
				mmc_hostname(host), mrq->stop->opcode,
				mrq->stop->error,
				mrq->stop->resp[0], mrq->stop->resp[1],
				mrq->stop->resp[2], mrq->stop->resp[3]);
		}

		if (mrq->done)
			mrq->done(mrq);

		mmc_host_clk_release(host);
	}
}

EXPORT_SYMBOL(mmc_request_done);

static void __mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
	int err;

	/* Assumes host controller has been runtime resumed by mmc_claim_host */
	err = mmc_retune(host);
	if (err) {
		mrq->cmd->error = err;
		mmc_request_done(host, mrq);
		return;
	}

	/*
	 * For sdio rw commands we must wait for card busy otherwise some
	 * sdio devices won't work properly.
	 */
	if (mmc_is_io_op(mrq->cmd->opcode) && host->ops->card_busy) {
		int tries = 500; /* Wait aprox 500ms at maximum */

		while (host->ops->card_busy(host) && --tries)
			mmc_delay(1);

		if (tries == 0) {
			mrq->cmd->error = -EBUSY;
			mmc_request_done(host, mrq);
			return;
		}
	}

	if (mrq->cap_cmd_during_tfr) {
		host->ongoing_mrq = mrq;
		/*
		 * Retry path could come through here without having waiting on
		 * cmd_completion, so ensure it is reinitialised.
		 */
		reinit_completion(&mrq->cmd_completion);
	}

	trace_mmc_request_start(host, mrq);

	host->ops->request(host, mrq);
}

static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
#ifdef CONFIG_MMC_DEBUG
	unsigned int i, sz;
	struct scatterlist *sg;
#endif
	mmc_retune_hold(host);

	if (mmc_card_removed(host->card))
		return -ENOMEDIUM;

	if (mrq->sbc) {
		pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
			 mmc_hostname(host), mrq->sbc->opcode,
			 mrq->sbc->arg, mrq->sbc->flags);
	}

	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
		 mmc_hostname(host), mrq->cmd->opcode,
		 mrq->cmd->arg, mrq->cmd->flags);

	if (mrq->data) {
		pr_debug("%s:     blksz %d blocks %d flags %08x "
			"tsac %d ms nsac %d\n",
			mmc_hostname(host), mrq->data->blksz,
			mrq->data->blocks, mrq->data->flags,
			mrq->data->timeout_ns / 1000000,
			mrq->data->timeout_clks);
	}

	if (mrq->stop) {
		pr_debug("%s:     CMD%u arg %08x flags %08x\n",
			 mmc_hostname(host), mrq->stop->opcode,
			 mrq->stop->arg, mrq->stop->flags);
	}

	WARN_ON(!host->claimed);

	mrq->cmd->error = 0;
	mrq->cmd->mrq = mrq;
	if (mrq->sbc) {
		mrq->sbc->error = 0;
		mrq->sbc->mrq = mrq;
	}
	if (mrq->data) {
		BUG_ON(mrq->data->blksz > host->max_blk_size);
		BUG_ON(mrq->data->blocks > host->max_blk_count);
		BUG_ON(mrq->data->blocks * mrq->data->blksz >
			host->max_req_size);

#ifdef CONFIG_MMC_DEBUG
		sz = 0;
		for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
			sz += sg->length;
		BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
#endif

		mrq->cmd->data = mrq->data;
		mrq->data->error = 0;
		mrq->data->mrq = mrq;
		if (mrq->stop) {
			mrq->data->stop = mrq->stop;
			mrq->stop->error = 0;
			mrq->stop->mrq = mrq;
		}
#ifdef CONFIG_MMC_PERF_PROFILING
		if (host->perf_enable)
			host->perf.start = ktime_get();
#endif
	}
	mmc_host_clk_hold(host);
	led_trigger_event(host->led, LED_FULL);

	if (mmc_is_data_request(mrq)) {
		mmc_deferred_scaling(host);
		mmc_clk_scaling_start_busy(host, true);
	}

	__mmc_start_request(host, mrq);

	return 0;
}

static int mmc_cmdq_check_retune(struct mmc_host *host)
{
	bool cmdq_mode;
	int err = 0;

	if (!host->need_retune || host->doing_retune || !host->card ||
			mmc_card_hs400es(host->card) ||
			(host->ios.clock <= MMC_HIGH_DDR_MAX_DTR))
		return 0;

	cmdq_mode = mmc_card_cmdq(host->card);
	if (cmdq_mode) {
		err = mmc_cmdq_halt(host, true);
		if (err) {
			pr_err("%s: %s: failed halting queue (%d)\n",
				mmc_hostname(host), __func__, err);
			host->cmdq_ops->dumpstate(host);
			goto halt_failed;
		}
	}

	mmc_retune_hold(host);
	err = mmc_retune(host);
	mmc_retune_release(host);

	if (cmdq_mode) {
		if (mmc_cmdq_halt(host, false)) {
			pr_err("%s: %s: cmdq unhalt failed\n",
			mmc_hostname(host), __func__);
			host->cmdq_ops->dumpstate(host);
		}
	}

halt_failed:
	pr_debug("%s: %s: Retuning done err: %d\n",
				mmc_hostname(host), __func__, err);

	return err;
}

static int mmc_start_cmdq_request(struct mmc_host *host,
				   struct mmc_request *mrq)
{
	int ret = 0;

	if (mrq->data) {
		pr_debug("%s:     blksz %d blocks %d flags %08x tsac %lu ms nsac %d\n",
			mmc_hostname(host), mrq->data->blksz,
			mrq->data->blocks, mrq->data->flags,
			mrq->data->timeout_ns / NSEC_PER_MSEC,
			mrq->data->timeout_clks);

		BUG_ON(mrq->data->blksz > host->max_blk_size);
		BUG_ON(mrq->data->blocks > host->max_blk_count);
		BUG_ON(mrq->data->blocks * mrq->data->blksz >
			host->max_req_size);
		mrq->data->error = 0;
		mrq->data->mrq = mrq;
	}

	if (mrq->cmd) {
		mrq->cmd->error = 0;
		mrq->cmd->mrq = mrq;
	}

	mmc_host_clk_hold(host);
	mmc_cmdq_check_retune(host);
	if (likely(host->cmdq_ops->request)) {
		ret = host->cmdq_ops->request(host, mrq);
	} else {
		ret = -ENOENT;
		pr_err("%s: %s: cmdq request host op is not available\n",
			mmc_hostname(host), __func__);
	}

	if (ret) {
		mmc_host_clk_release(host);
		pr_err("%s: %s: issue request failed, err=%d\n",
			mmc_hostname(host), __func__, ret);
	}

	return ret;
}

/**
 *	mmc_blk_init_bkops_statistics - initialize bkops statistics
 *	@card: MMC card to start BKOPS
 *
 *	Initialize and enable the bkops statistics
 */
void mmc_blk_init_bkops_statistics(struct mmc_card *card)
{
	int i;
	struct mmc_bkops_stats *stats;

	if (!card)
		return;

	stats = &card->bkops.stats;
	spin_lock(&stats->lock);

	stats->manual_start = 0;
	stats->hpi = 0;
	stats->auto_start = 0;
	stats->auto_stop = 0;
	for (i = 0 ; i < MMC_BKOPS_NUM_SEVERITY_LEVELS ; i++)
		stats->level[i] = 0;
	stats->enabled = true;

	spin_unlock(&stats->lock);
}
EXPORT_SYMBOL(mmc_blk_init_bkops_statistics);

static void mmc_update_bkops_hpi(struct mmc_bkops_stats *stats)
{
	spin_lock_irq(&stats->lock);
	if (stats->enabled)
		stats->hpi++;
	spin_unlock_irq(&stats->lock);
}

static void mmc_update_bkops_start(struct mmc_bkops_stats *stats)
{
	spin_lock_irq(&stats->lock);
	if (stats->enabled)
		stats->manual_start++;
	spin_unlock_irq(&stats->lock);
}

static void mmc_update_bkops_auto_on(struct mmc_bkops_stats *stats)
{
	spin_lock_irq(&stats->lock);
	if (stats->enabled)
		stats->auto_start++;
	spin_unlock_irq(&stats->lock);
}

static void mmc_update_bkops_auto_off(struct mmc_bkops_stats *stats)
{
	spin_lock_irq(&stats->lock);
	if (stats->enabled)
		stats->auto_stop++;
	spin_unlock_irq(&stats->lock);
}

static void mmc_update_bkops_level(struct mmc_bkops_stats *stats,
					unsigned level)
{
	BUG_ON(level >= MMC_BKOPS_NUM_SEVERITY_LEVELS);
	spin_lock_irq(&stats->lock);
	if (stats->enabled)
		stats->level[level]++;
	spin_unlock_irq(&stats->lock);
}

/**
 *	mmc_set_auto_bkops - set auto BKOPS for supported cards
 *	@card: MMC card to start BKOPS
 *	@enable: enable/disable flag
 *	Configure the card to run automatic BKOPS.
 *
 *	Should be called when host is claimed.
*/
int mmc_set_auto_bkops(struct mmc_card *card, bool enable)
{
	int ret = 0;
	u8 bkops_en;

	BUG_ON(!card);
	enable = !!enable;

	if (unlikely(!mmc_card_support_auto_bkops(card))) {
		pr_err("%s: %s: card doesn't support auto bkops\n",
				mmc_hostname(card->host), __func__);
		return -EPERM;
	}

	if (enable) {
		if (mmc_card_doing_auto_bkops(card))
			goto out;
		bkops_en = card->ext_csd.bkops_en | EXT_CSD_BKOPS_AUTO_EN;
	} else {
		if (!mmc_card_doing_auto_bkops(card))
			goto out;
		bkops_en = card->ext_csd.bkops_en & ~EXT_CSD_BKOPS_AUTO_EN;
	}

	ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN,
			bkops_en, 0);
	if (ret) {
		pr_err("%s: %s: error in setting auto bkops to %d (%d)\n",
			mmc_hostname(card->host), __func__, enable, ret);
	} else {
		if (enable) {
			mmc_card_set_auto_bkops(card);
			mmc_update_bkops_auto_on(&card->bkops.stats);
		} else {
			mmc_card_clr_auto_bkops(card);
			mmc_update_bkops_auto_off(&card->bkops.stats);
		}
		card->ext_csd.bkops_en = bkops_en;
		pr_debug("%s: %s: bkops state %x\n",
				mmc_hostname(card->host), __func__, bkops_en);
	}
out:
	return ret;
}
EXPORT_SYMBOL(mmc_set_auto_bkops);

/**
 *	mmc_check_bkops - check BKOPS for supported cards
 *	@card: MMC card to check BKOPS
 *
 *	Read the BKOPS status in order to determine whether the
 *	card requires bkops to be started.
 */
void mmc_check_bkops(struct mmc_card *card)
{
	int err;

	BUG_ON(!card);

	if (mmc_card_doing_bkops(card))
		return;

	err = mmc_read_bkops_status(card);
	if (err) {
		pr_err("%s: Failed to read bkops status: %d\n",
		       mmc_hostname(card->host), err);
		return;
	}

	card->bkops.needs_check = false;

	mmc_update_bkops_level(&card->bkops.stats,
				card->ext_csd.raw_bkops_status);

	card->bkops.needs_bkops = card->ext_csd.raw_bkops_status > 0;
}
EXPORT_SYMBOL(mmc_check_bkops);

/**
 *	mmc_start_manual_bkops - start BKOPS for supported cards
 *	@card: MMC card to start BKOPS
 *
 *      Send START_BKOPS to the card.
 *      The function should be called with claimed host.
 */
void mmc_start_manual_bkops(struct mmc_card *card)
{
	int err;

	BUG_ON(!card);

	if (unlikely(!mmc_card_configured_manual_bkops(card)))
		return;

	if (mmc_card_doing_bkops(card))
		return;

	mmc_retune_hold(card->host);

	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_START,
				1, 0, false, true, false);
	if (err) {
		pr_err("%s: Error %d starting manual bkops\n",
				mmc_hostname(card->host), err);
	} else {
		mmc_card_set_doing_bkops(card);
		mmc_update_bkops_start(&card->bkops.stats);
		card->bkops.needs_bkops = false;
	}

	mmc_retune_release(card->host);
}
EXPORT_SYMBOL(mmc_start_manual_bkops);

/*
 * mmc_wait_data_done() - done callback for data request
 * @mrq: done data request
 *
 * Wakes up mmc context, passed as a callback to host controller driver
 */
static void mmc_wait_data_done(struct mmc_request *mrq)
{
	unsigned long flags;
	struct mmc_context_info *context_info = &mrq->host->context_info;

	spin_lock_irqsave(&context_info->lock, flags);
	context_info->is_done_rcv = true;
	wake_up_interruptible(&context_info->wait);
	spin_unlock_irqrestore(&context_info->lock, flags);
}

static void mmc_wait_done(struct mmc_request *mrq)
{
	complete(&mrq->completion);
}

static inline void mmc_wait_ongoing_tfr_cmd(struct mmc_host *host)
{
	struct mmc_request *ongoing_mrq = READ_ONCE(host->ongoing_mrq);

	/*
	 * If there is an ongoing transfer, wait for the command line to become
	 * available.
	 */
	if (ongoing_mrq && !completion_done(&ongoing_mrq->cmd_completion))
		wait_for_completion(&ongoing_mrq->cmd_completion);
}

/*
 *__mmc_start_data_req() - starts data request
 * @host: MMC host to start the request
 * @mrq: data request to start
 *
 * Sets the done callback to be called when request is completed by the card.
 * Starts data mmc request execution
 * If an ongoing transfer is already in progress, wait for the command line
 * to become available before sending another command.
 */
static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
{
	int err;

	mmc_wait_ongoing_tfr_cmd(host);

	mrq->done = mmc_wait_data_done;
	mrq->host = host;

	init_completion(&mrq->cmd_completion);

	err = mmc_start_request(host, mrq);
	if (err) {
		mrq->cmd->error = err;
		mmc_complete_cmd(mrq);
		mmc_wait_data_done(mrq);
	}

	return err;
}

static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
{
	int err;

	mmc_wait_ongoing_tfr_cmd(host);

	init_completion(&mrq->completion);
	mrq->done = mmc_wait_done;

	init_completion(&mrq->cmd_completion);

	err = mmc_start_request(host, mrq);
	if (err) {
		mrq->cmd->error = err;
		mmc_complete_cmd(mrq);
		complete(&mrq->completion);
	}

	return err;
}

/*
 * mmc_wait_for_data_req_done() - wait for request completed
 * @host: MMC host to prepare the command.
 * @mrq: MMC request to wait for
 *
 * Blocks MMC context till host controller will ack end of data request
 * execution or new request notification arrives from the block layer.
 * Handles command retries.
 *
 * Returns enum mmc_blk_status after checking errors.
 */
static int mmc_wait_for_data_req_done(struct mmc_host *host,
				      struct mmc_request *mrq,
				      struct mmc_async_req *next_req)
{
	struct mmc_command *cmd;
	struct mmc_context_info *context_info = &host->context_info;
	int err;
	bool is_done_rcv = false;
	unsigned long flags;

	while (1) {
		wait_event_interruptible(context_info->wait,
				(context_info->is_done_rcv ||
				 context_info->is_new_req));
		spin_lock_irqsave(&context_info->lock, flags);
		is_done_rcv = context_info->is_done_rcv;
		context_info->is_waiting_last_req = false;
		spin_unlock_irqrestore(&context_info->lock, flags);
		if (is_done_rcv) {
			context_info->is_done_rcv = false;
			context_info->is_new_req = false;
			cmd = mrq->cmd;

			if (!cmd->error || !cmd->retries ||
			    mmc_card_removed(host->card)) {
				err = host->areq->err_check(host->card,
							    host->areq);
				break; /* return err */
			} else {
				mmc_retune_recheck(host);
				pr_info("%s: req failed (CMD%u): %d, retrying...\n",
					mmc_hostname(host),
					cmd->opcode, cmd->error);
				cmd->retries--;
				cmd->error = 0;
				__mmc_start_request(host, mrq);
				continue; /* wait for done/new event again */
			}
		} else if (context_info->is_new_req) {
			context_info->is_new_req = false;
			if (!next_req)
				return MMC_BLK_NEW_REQUEST;
		}
	}
	mmc_retune_release(host);
	return err;
}

void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq)
{
	struct mmc_command *cmd;

	while (1) {
		wait_for_completion_io(&mrq->completion);

		cmd = mrq->cmd;

		/*
		 * If host has timed out waiting for the sanitize/bkops
		 * to complete, card might be still in programming state
		 * so let's try to bring the card out of programming
		 * state.
		 */
		if ((cmd->bkops_busy || cmd->sanitize_busy) && cmd->error == -ETIMEDOUT) {
			if (!mmc_interrupt_hpi(host->card)) {
				pr_warn("%s: %s: Interrupted sanitize/bkops\n",
					   mmc_hostname(host), __func__);
				cmd->error = 0;
				break;
			} else {
				pr_err("%s: %s: Failed to interrupt sanitize\n",
				       mmc_hostname(host), __func__);
			}
		}
		if (!cmd->error || !cmd->retries ||
		    mmc_card_removed(host->card)) {
			if (cmd->error && !cmd->retries &&
			     cmd->opcode != MMC_SEND_STATUS &&
			     cmd->opcode != MMC_SEND_TUNING_BLOCK)
				mmc_recovery_fallback_lower_speed(host);
			break;
		}

		mmc_retune_recheck(host);

		pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
			 mmc_hostname(host), cmd->opcode, cmd->error);
		cmd->retries--;
		cmd->error = 0;
		__mmc_start_request(host, mrq);
	}

	mmc_retune_release(host);
}
EXPORT_SYMBOL(mmc_wait_for_req_done);

/**
 *	mmc_is_req_done - Determine if a 'cap_cmd_during_tfr' request is done
 *	@host: MMC host
 *	@mrq: MMC request
 *
 *	mmc_is_req_done() is used with requests that have
 *	mrq->cap_cmd_during_tfr = true. mmc_is_req_done() must be called after
 *	starting a request and before waiting for it to complete. That is,
 *	either in between calls to mmc_start_req(), or after mmc_wait_for_req()
 *	and before mmc_wait_for_req_done(). If it is called at other times the
 *	result is not meaningful.
 */
bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq)
{
	if (host->areq)
		return host->context_info.is_done_rcv;
	else
		return completion_done(&mrq->completion);
}
EXPORT_SYMBOL(mmc_is_req_done);

/**
 *	mmc_pre_req - Prepare for a new request
 *	@host: MMC host to prepare command
 *	@mrq: MMC request to prepare for
 *	@is_first_req: true if there is no previous started request
 *                     that may run in parellel to this call, otherwise false
 *
 *	mmc_pre_req() is called in prior to mmc_start_req() to let
 *	host prepare for the new request. Preparation of a request may be
 *	performed while another request is running on the host.
 */
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
		 bool is_first_req)
{
	if (host->ops->pre_req) {
		mmc_host_clk_hold(host);
		host->ops->pre_req(host, mrq, is_first_req);
		mmc_host_clk_release(host);
	}
}

/**
 *	mmc_post_req - Post process a completed request
 *	@host: MMC host to post process command
 *	@mrq: MMC request to post process for
 *	@err: Error, if non zero, clean up any resources made in pre_req
 *
 *	Let the host post process a completed request. Post processing of
 *	a request may be performed while another reuqest is running.
 */
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
			 int err)
{
	if (host->ops->post_req) {
		mmc_host_clk_hold(host);
		host->ops->post_req(host, mrq, err);
		mmc_host_clk_release(host);
	}
}

/**
 *	mmc_cmdq_discard_card_queue - discard the task[s] in the device
 *	@host: host instance
 *	@tasks: mask of tasks to be knocked off
 *		0: remove all queued tasks
 */
int mmc_cmdq_discard_queue(struct mmc_host *host, u32 tasks)
{
	return mmc_discard_queue(host, tasks);
}
EXPORT_SYMBOL(mmc_cmdq_discard_queue);


/**
 *	mmc_cmdq_post_req - post process of a completed request
 *	@host: host instance
 *	@tag: the request tag.
 *	@err: non-zero is error, success otherwise
 */
void mmc_cmdq_post_req(struct mmc_host *host, int tag, int err)
{
	if (likely(host->cmdq_ops->post_req))
		host->cmdq_ops->post_req(host, tag, err);
}
EXPORT_SYMBOL(mmc_cmdq_post_req);

/**
 *	mmc_cmdq_halt - halt/un-halt the command queue engine
 *	@host: host instance
 *	@halt: true - halt, un-halt otherwise
 *
 *	Host halts the command queue engine. It should complete
 *	the ongoing transfer and release the bus.
 *	All legacy commands can be sent upon successful
 *	completion of this function.
 *	Returns 0 on success, negative otherwise
 */
int mmc_cmdq_halt(struct mmc_host *host, bool halt)
{
	int err = 0;

	if (mmc_host_cq_disable(host)) {
		pr_debug("%s: %s: CQE is already disabled\n",
				mmc_hostname(host), __func__);
		return 0;
	}

	if ((halt && mmc_host_halt(host)) ||
			(!halt && !mmc_host_halt(host))) {
		pr_debug("%s: %s: CQE is already %s\n", mmc_hostname(host),
				__func__, halt ? "halted" : "un-halted");
		return 0;
	}

	mmc_host_clk_hold(host);
	if (host->cmdq_ops->halt) {
		err = host->cmdq_ops->halt(host, halt);
		if (!err && host->ops->notify_halt)
			host->ops->notify_halt(host, halt);
		if (!err && halt)
			mmc_host_set_halt(host);
		else if (!err && !halt) {
			mmc_host_clr_halt(host);
			wake_up(&host->cmdq_ctx.wait);
		}
	} else {
		err = -ENOSYS;
	}
	mmc_host_clk_release(host);
	return err;
}
EXPORT_SYMBOL(mmc_cmdq_halt);

int mmc_cmdq_start_req(struct mmc_host *host, struct mmc_cmdq_req *cmdq_req)
{
	struct mmc_request *mrq = &cmdq_req->mrq;

	mrq->host = host;
	if (mmc_card_removed(host->card)) {
		mrq->cmd->error = -ENOMEDIUM;
		return -ENOMEDIUM;
	}
	return mmc_start_cmdq_request(host, mrq);
}
EXPORT_SYMBOL(mmc_cmdq_start_req);

static void mmc_cmdq_dcmd_req_done(struct mmc_request *mrq)
{
	mmc_host_clk_release(mrq->host);
	complete(&mrq->completion);
}

int mmc_cmdq_wait_for_dcmd(struct mmc_host *host,
			struct mmc_cmdq_req *cmdq_req)
{
	struct mmc_request *mrq = &cmdq_req->mrq;
	struct mmc_command *cmd = mrq->cmd;
	int err = 0;

	init_completion(&mrq->completion);
	mrq->done = mmc_cmdq_dcmd_req_done;
	err = mmc_cmdq_start_req(host, cmdq_req);
	if (err)
		return err;

	wait_for_completion_io(&mrq->completion);
	if (cmd->error) {
		pr_err("%s: DCMD %d failed with err %d\n",
				mmc_hostname(host), cmd->opcode,
				cmd->error);
		err = cmd->error;
		mmc_host_clk_hold(host);
		host->cmdq_ops->dumpstate(host);
		mmc_host_clk_release(host);
	}
	return err;
}
EXPORT_SYMBOL(mmc_cmdq_wait_for_dcmd);

int mmc_cmdq_prepare_flush(struct mmc_command *cmd)
{
	return   __mmc_switch_cmdq_mode(cmd, EXT_CSD_CMD_SET_NORMAL,
				     EXT_CSD_FLUSH_CACHE, 1,
				     0, true, true);
}
EXPORT_SYMBOL(mmc_cmdq_prepare_flush);

/**
 *	mmc_start_req - start a non-blocking request
 *	@host: MMC host to start command
 *	@areq: async request to start
 *	@error: out parameter returns 0 for success, otherwise non zero
 *
 *	Start a new MMC custom command request for a host.
 *	If there is on ongoing async request wait for completion
 *	of that request and start the new one and return.
 *	Does not wait for the new request to complete.
 *
 *      Returns the completed request, NULL in case of none completed.
 *	Wait for the an ongoing request (previoulsy started) to complete and
 *	return the completed request. If there is no ongoing request, NULL
 *	is returned without waiting. NULL is not an error condition.
 */
struct mmc_async_req *mmc_start_req(struct mmc_host *host,
				    struct mmc_async_req *areq, int *error)
{
	int err = 0;
	int start_err = 0;
	struct mmc_async_req *data = host->areq;

	/* Prepare a new request */
	if (areq)
		mmc_pre_req(host, areq->mrq, !host->areq);

	if (host->areq) {
		err = mmc_wait_for_data_req_done(host, host->areq->mrq,	areq);
		if (err == MMC_BLK_NEW_REQUEST) {
			if (error)
				*error = err;
			/*
			 * The previous request was not completed,
			 * nothing to return
			 */
			return NULL;
		}
		/*
		 * Check BKOPS urgency for each R1 response
		 */
		if (host->card && mmc_card_mmc(host->card) &&
		    ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
		     (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
		    (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {

			/* Cancel the prepared request */
			if (areq)
				mmc_post_req(host, areq->mrq, -EINVAL);

			mmc_check_bkops(host->card);

			/* prepare the request again */
			if (areq)
				mmc_pre_req(host, areq->mrq, !host->areq);
		}
	}

	if (!err && areq) {
#ifdef CONFIG_BLOCK
		if (host->latency_hist_enabled) {
			areq->mrq->io_start = ktime_get();
			areq->mrq->lat_hist_enabled = 1;
		} else
			areq->mrq->lat_hist_enabled = 0;
#endif
		start_err = __mmc_start_data_req(host, areq->mrq);
	}

	if (host->areq)
		mmc_post_req(host, host->areq->mrq, 0);

	if (err && areq)
		mmc_post_req(host, areq->mrq, -EINVAL);

	if (err)
		host->areq = NULL;
	else
		host->areq = areq;

	if (error)
		*error = err;
	return data;
}
EXPORT_SYMBOL(mmc_start_req);

/**
 *	mmc_wait_for_req - start a request and wait for completion
 *	@host: MMC host to start command
 *	@mrq: MMC request to start
 *
 *	Start a new MMC custom command request for a host, and wait
 *	for the command to complete. In the case of 'cap_cmd_during_tfr'
 *	requests, the transfer is ongoing and the caller can issue further
 *	commands that do not use the data lines, and then wait by calling
 *	mmc_wait_for_req_done().
 *	Does not attempt to parse the response.
 */
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
{
#ifdef CONFIG_MMC_BLOCK_DEFERRED_RESUME
	if (mmc_bus_needs_resume(host))
		mmc_resume_bus(host);
#endif
	__mmc_start_req(host, mrq);

	if (!mrq->cap_cmd_during_tfr)
		mmc_wait_for_req_done(host, mrq);
}
EXPORT_SYMBOL(mmc_wait_for_req);

/**
 *	mmc_interrupt_hpi - Issue for High priority Interrupt
 *	@card: the MMC card associated with the HPI transfer
 *
 *	Issued High Priority Interrupt, and check for card status
 *	until out-of prg-state.
 */
int mmc_interrupt_hpi(struct mmc_card *card)
{
	int err;
	u32 status;
	unsigned long prg_wait;

	BUG_ON(!card);

	if (!card->ext_csd.hpi_en) {
		pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
		return 1;
	}

	mmc_claim_host(card->host);
	err = mmc_send_status(card, &status);
	if (err) {
		pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
		goto out;
	}

	switch (R1_CURRENT_STATE(status)) {
	case R1_STATE_IDLE:
	case R1_STATE_READY:
	case R1_STATE_STBY:
	case R1_STATE_TRAN:
		/*
		 * In idle and transfer states, HPI is not needed and the caller
		 * can issue the next intended command immediately
		 */
		goto out;
	case R1_STATE_PRG:
		break;
	default:
		/* In all other states, it's illegal to issue HPI */
		pr_debug("%s: HPI cannot be sent. Card state=%d\n",
			mmc_hostname(card->host), R1_CURRENT_STATE(status));
		err = -EINVAL;
		goto out;
	}

	err = mmc_send_hpi_cmd(card, &status);

	prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
	do {
		err = mmc_send_status(card, &status);

		if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
			break;
		if (time_after(jiffies, prg_wait)) {
			err = mmc_send_status(card, &status);
			if (!err && R1_CURRENT_STATE(status) != R1_STATE_TRAN)
				err = -ETIMEDOUT;
			else
				break;
		}
	} while (!err);

out:
	mmc_release_host(card->host);
	return err;
}
EXPORT_SYMBOL(mmc_interrupt_hpi);

/**
 *	mmc_wait_for_cmd - start a command and wait for completion
 *	@host: MMC host to start command
 *	@cmd: MMC command to start
 *	@retries: maximum number of retries
 *
 *	Start a new MMC command for a host, and wait for the command
 *	to complete.  Return any error that occurred while the command
 *	was executing.  Do not attempt to parse the response.
 */
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
{
	struct mmc_request mrq = {NULL};

	WARN_ON(!host->claimed);

	memset(cmd->resp, 0, sizeof(cmd->resp));
	cmd->retries = retries;

	mrq.cmd = cmd;
	cmd->data = NULL;

	mmc_wait_for_req(host, &mrq);

	return cmd->error;
}

EXPORT_SYMBOL(mmc_wait_for_cmd);

/**
 *	mmc_stop_bkops - stop ongoing BKOPS
 *	@card: MMC card to check BKOPS
 *
 *	Send HPI command to stop ongoing background operations to
 *	allow rapid servicing of foreground operations, e.g. read/
 *	writes. Wait until the card comes out of the programming state
 *	to avoid errors in servicing read/write requests.
 */
int mmc_stop_bkops(struct mmc_card *card)
{
	int err = 0;

	BUG_ON(!card);
	if (unlikely(!mmc_card_configured_manual_bkops(card)))
		goto out;
	if (!mmc_card_doing_bkops(card))
		goto out;

	err = mmc_interrupt_hpi(card);

	/*
	 * If err is EINVAL, we can't issue an HPI.
	 * It should complete the BKOPS.
	 */
	if (!err || (err == -EINVAL)) {
		mmc_card_clr_doing_bkops(card);
		mmc_update_bkops_hpi(&card->bkops.stats);
		mmc_retune_release(card->host);
		err = 0;
	}
out:
	return err;
}
EXPORT_SYMBOL(mmc_stop_bkops);

int mmc_read_bkops_status(struct mmc_card *card)
{
	int err;
	u8 *ext_csd;

	mmc_claim_host(card->host);
	err = mmc_get_ext_csd(card, &ext_csd);
	mmc_release_host(card->host);
	if (err)
		return err;

	card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS] &
		MMC_BKOPS_URGENCY_MASK;
	card->ext_csd.raw_exception_status =
		ext_csd[EXT_CSD_EXP_EVENTS_STATUS] & (EXT_CSD_URGENT_BKOPS |
						      EXT_CSD_DYNCAP_NEEDED |
						      EXT_CSD_SYSPOOL_EXHAUSTED
						      | EXT_CSD_PACKED_FAILURE);

	kfree(ext_csd);
	return 0;
}
EXPORT_SYMBOL(mmc_read_bkops_status);

/**
 *	mmc_set_data_timeout - set the timeout for a data command
 *	@data: data phase for command
 *	@card: the MMC card associated with the data transfer
 *
 *	Computes the data timeout parameters according to the
 *	correct algorithm given the card type.
 */
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
{
	unsigned int mult;

	if (!card) {
		WARN_ON(1);
		return;
	}
	/*
	 * SDIO cards only define an upper 1 s limit on access.
	 */
	if (mmc_card_sdio(card)) {
		data->timeout_ns = 1000000000;
		data->timeout_clks = 0;
		return;
	}

	/*
	 * SD cards use a 100 multiplier rather than 10
	 */
	mult = mmc_card_sd(card) ? 100 : 10;

	/*
	 * Scale up the multiplier (and therefore the timeout) by
	 * the r2w factor for writes.
	 */
	if (data->flags & MMC_DATA_WRITE)
		mult <<= card->csd.r2w_factor;

	data->timeout_ns = card->csd.tacc_ns * mult;
	data->timeout_clks = card->csd.tacc_clks * mult;

	/*
	 * SD cards also have an upper limit on the timeout.
	 */
	if (mmc_card_sd(card)) {
		unsigned int timeout_us, limit_us;

		timeout_us = data->timeout_ns / 1000;
		if (mmc_host_clk_rate(card->host))
			timeout_us += data->timeout_clks * 1000 /
				(mmc_host_clk_rate(card->host) / 1000);

		if (data->flags & MMC_DATA_WRITE)
			/*
			 * The MMC spec "It is strongly recommended
			 * for hosts to implement more than 500ms
			 * timeout value even if the card indicates
			 * the 250ms maximum busy length."  Even the
			 * previous value of 300ms is known to be
			 * insufficient for some cards.
			 */
			limit_us = 3000000;
		else
			limit_us = 100000;

		/*
		 * SDHC cards always use these fixed values.
		 */
		if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
			data->timeout_ns = limit_us * 1000;
			data->timeout_clks = 0;
		}

		/* assign limit value if invalid */
		if (timeout_us == 0)
			data->timeout_ns = limit_us * 1000;
	}

	/*
	 * Some cards require longer data read timeout than indicated in CSD.
	 * Address this by setting the read timeout to a "reasonably high"
	 * value. For the cards tested, 600ms has proven enough. If necessary,
	 * this value can be increased if other problematic cards require this.
	 * Certain Hynix 5.x cards giving read timeout even with 300ms.
	 * Increasing further to max value (4s).
	 */
	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
		data->timeout_ns = 4000000000u;
		data->timeout_clks = 0;
	}

	/*
	 * Some cards need very high timeouts if driven in SPI mode.
	 * The worst observed timeout was 900ms after writing a
	 * continuous stream of data until the internal logic
	 * overflowed.
	 */
	if (mmc_host_is_spi(card->host)) {
		if (data->flags & MMC_DATA_WRITE) {
			if (data->timeout_ns < 1000000000)
				data->timeout_ns = 1000000000;	/* 1s */
		} else {
			if (data->timeout_ns < 100000000)
				data->timeout_ns =  100000000;	/* 100ms */
		}
	}
	/* Increase the timeout values for some bad INAND MCP devices */
	if (card->quirks & MMC_QUIRK_INAND_DATA_TIMEOUT) {
		data->timeout_ns = 4000000000u; /* 4s */
		data->timeout_clks = 0;
	}
}
EXPORT_SYMBOL(mmc_set_data_timeout);

/**
 *	mmc_align_data_size - pads a transfer size to a more optimal value
 *	@card: the MMC card associated with the data transfer
 *	@sz: original transfer size
 *
 *	Pads the original data size with a number of extra bytes in
 *	order to avoid controller bugs and/or performance hits
 *	(e.g. some controllers revert to PIO for certain sizes).
 *
 *	Returns the improved size, which might be unmodified.
 *
 *	Note that this function is only relevant when issuing a
 *	single scatter gather entry.
 */
unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
{
	/*
	 * FIXME: We don't have a system for the controller to tell
	 * the core about its problems yet, so for now we just 32-bit
	 * align the size.
	 */
	sz = ((sz + 3) / 4) * 4;

	return sz;
}
EXPORT_SYMBOL(mmc_align_data_size);

/**
 *	__mmc_claim_host - exclusively claim a host
 *	@host: mmc host to claim
 *	@abort: whether or not the operation should be aborted
 *
 *	Claim a host for a set of operations.  If @abort is non null and
 *	dereference a non-zero value then this will return prematurely with
 *	that non-zero value without acquiring the lock.  Returns zero
 *	with the lock held otherwise.
 */
int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
{
	DECLARE_WAITQUEUE(wait, current);
	unsigned long flags;
	int stop;
	bool pm = false;

	might_sleep();

	add_wait_queue(&host->wq, &wait);

	spin_lock_irqsave(&host->lock, flags);
	while (1) {
		set_current_state(TASK_UNINTERRUPTIBLE);
		stop = abort ? atomic_read(abort) : 0;
		if (stop || !host->claimed || host->claimer == current)
			break;
		spin_unlock_irqrestore(&host->lock, flags);
		schedule();
		spin_lock_irqsave(&host->lock, flags);
	}
	set_current_state(TASK_RUNNING);
	if (!stop) {
		host->claimed = 1;
		host->claimer = current;
		host->claim_cnt += 1;
		if (host->claim_cnt == 1)
			pm = true;
	} else
		wake_up(&host->wq);
	spin_unlock_irqrestore(&host->lock, flags);
	remove_wait_queue(&host->wq, &wait);

	if (pm) {
		mmc_host_clk_hold(host);
		pm_runtime_get_sync(mmc_dev(host));
	}

	if (host->ops->enable && !stop && host->claim_cnt == 1)
		host->ops->enable(host);

	return stop;
}
EXPORT_SYMBOL(__mmc_claim_host);

/**
 *     mmc_try_claim_host - try exclusively to claim a host
 *        and keep trying for given time, with a gap of 10ms
 *     @host: mmc host to claim
 *     @dealy_ms: delay in ms
 *
 *     Returns %1 if the host is claimed, %0 otherwise.
 */
int mmc_try_claim_host(struct mmc_host *host, unsigned int delay_ms)
{
	int claimed_host = 0;
	unsigned long flags;
	int retry_cnt = delay_ms/10;
	bool pm = false;

	do {
		spin_lock_irqsave(&host->lock, flags);
		if (!host->claimed || host->claimer == current) {
			host->claimed = 1;
			host->claimer = current;
			host->claim_cnt += 1;
			claimed_host = 1;
			if (host->claim_cnt == 1)
				pm = true;
		}
		spin_unlock_irqrestore(&host->lock, flags);
		if (!claimed_host)
			mmc_delay(10);
	} while (!claimed_host && retry_cnt--);

	if (pm) {
		mmc_host_clk_hold(host);
		pm_runtime_get_sync(mmc_dev(host));
	}

	if (host->ops->enable && claimed_host && host->claim_cnt == 1)
		host->ops->enable(host);
	return claimed_host;
}
EXPORT_SYMBOL(mmc_try_claim_host);

/**
 *	mmc_release_host - release a host
 *	@host: mmc host to release
 *
 *	Release a MMC host, allowing others to claim the host
 *	for their operations.
 */
void mmc_release_host(struct mmc_host *host)
{
	unsigned long flags;

	WARN_ON(!host->claimed);

	if (host->ops->disable && host->claim_cnt == 1)
		host->ops->disable(host);

	spin_lock_irqsave(&host->lock, flags);
	if (--host->claim_cnt) {
		/* Release for nested claim */
		spin_unlock_irqrestore(&host->lock, flags);
	} else {
		host->claimed = 0;
		host->claimer = NULL;
		spin_unlock_irqrestore(&host->lock, flags);
		wake_up(&host->wq);
		pm_runtime_mark_last_busy(mmc_dev(host));
		pm_runtime_put_autosuspend(mmc_dev(host));
		mmc_host_clk_release(host);
	}
}
EXPORT_SYMBOL(mmc_release_host);

/*
 * This is a helper function, which fetches a runtime pm reference for the
 * card device and also claims the host.
 */
void mmc_get_card(struct mmc_card *card)
{
	pm_runtime_get_sync(&card->dev);
	mmc_claim_host(card->host);
#ifdef CONFIG_MMC_BLOCK_DEFERRED_RESUME
	if (mmc_bus_needs_resume(card->host))
		mmc_resume_bus(card->host);
#endif
}
EXPORT_SYMBOL(mmc_get_card);


/*
 * This is a helper function, which releases the host and drops the runtime
 * pm reference for the card device.
 */
void mmc_put_card(struct mmc_card *card)
{
	mmc_release_host(card->host);
	pm_runtime_mark_last_busy(&card->dev);
	pm_runtime_put_autosuspend(&card->dev);
}
EXPORT_SYMBOL(mmc_put_card);

/*
 * Internal function that does the actual ios call to the host driver,
 * optionally printing some debug output.
 */
void mmc_set_ios(struct mmc_host *host)
{
	struct mmc_ios *ios = &host->ios;

	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
		"width %u timing %u\n",
		 mmc_hostname(host), ios->clock, ios->bus_mode,
		 ios->power_mode, ios->chip_select, ios->vdd,
		 1 << ios->bus_width, ios->timing);

	if (ios->clock > 0)
		mmc_set_ungated(host);
	host->ops->set_ios(host, ios);
	if (ios->old_rate != ios->clock) {
		if (likely(ios->clk_ts)) {
			char trace_info[80];
			snprintf(trace_info, 80,
				"%s: freq_KHz %d --> %d | t = %d",
				mmc_hostname(host), ios->old_rate / 1000,
				ios->clock / 1000, jiffies_to_msecs(
					(long)jiffies - (long)ios->clk_ts));
			trace_mmc_clk(trace_info);
		}
		ios->old_rate = ios->clock;
		ios->clk_ts = jiffies;
	}
}
EXPORT_SYMBOL(mmc_set_ios);

/*
 * Control chip select pin on a host.
 */
void mmc_set_chip_select(struct mmc_host *host, int mode)
{
	mmc_host_clk_hold(host);
	host->ios.chip_select = mode;
	mmc_set_ios(host);
	mmc_host_clk_release(host);
}

/*
 * Sets the host clock to the highest possible frequency that
 * is below "hz".
 */
static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
	WARN_ON(hz && hz < host->f_min);

	if (hz > host->f_max)
		hz = host->f_max;

	host->ios.clock = hz;
	mmc_set_ios(host);
}

void mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
	mmc_host_clk_hold(host);
	__mmc_set_clock(host, hz);
	mmc_host_clk_release(host);
}

#ifdef CONFIG_MMC_CLKGATE
/*
 * This gates the clock by setting it to 0 Hz.
 */
void mmc_gate_clock(struct mmc_host *host)
{
	unsigned long flags;

	WARN_ON(!host->ios.clock);

	spin_lock_irqsave(&host->clk_lock, flags);
	host->clk_old = host->ios.clock;
	host->ios.clock = 0;
	host->clk_gated = true;
	spin_unlock_irqrestore(&host->clk_lock, flags);
	mmc_set_ios(host);
}

/*
 * This restores the clock from gating by using the cached
 * clock value.
 */
void mmc_ungate_clock(struct mmc_host *host)
{
	/*
	 * We should previously have gated the clock, so the clock shall
	 * be 0 here! The clock may however be 0 during initialization,
	 * when some request operations are performed before setting
	 * the frequency. When ungate is requested in that situation
	 * we just ignore the call.
	 */
	if (host->clk_old) {
		WARN_ON(host->ios.clock);
		/* This call will also set host->clk_gated to false */
		__mmc_set_clock(host, host->clk_old);
		/*
		 * We have seen that host controller's clock tuning circuit may
		 * go out of sync if controller clocks are gated.
		 * To workaround this issue, we are triggering retuning of the
		 * tuning circuit after ungating the controller clocks.
		 */
		mmc_retune_needed(host);
	}
}

void mmc_set_ungated(struct mmc_host *host)
{
	unsigned long flags;

	/*
	 * We've been given a new frequency while the clock is gated,
	 * so make sure we regard this as ungating it.
	 */
	spin_lock_irqsave(&host->clk_lock, flags);
	host->clk_gated = false;
	spin_unlock_irqrestore(&host->clk_lock, flags);
}

#else
void mmc_set_ungated(struct mmc_host *host)
{
}

void mmc_gate_clock(struct mmc_host *host)
{
}
#endif

int mmc_execute_tuning(struct mmc_card *card)
{
	struct mmc_host *host = card->host;
	u32 opcode;
	int err;

	if (!host->ops->execute_tuning)
		return 0;

	if (mmc_card_mmc(card))
		opcode = MMC_SEND_TUNING_BLOCK_HS200;
	else
		opcode = MMC_SEND_TUNING_BLOCK;

	mmc_host_clk_hold(host);
	err = host->ops->execute_tuning(host, opcode);
	mmc_host_clk_release(host);

	if (err)
		pr_err("%s: tuning execution failed: %d\n",
			mmc_hostname(host), err);
	else
		mmc_retune_enable(host);

	return err;
}

/*
 * Change the bus mode (open drain/push-pull) of a host.
 */
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
	mmc_host_clk_hold(host);
	host->ios.bus_mode = mode;
	mmc_set_ios(host);
	mmc_host_clk_release(host);
}

/*
 * Change data bus width of a host.
 */
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
	mmc_host_clk_hold(host);
	host->ios.bus_width = width;
	mmc_set_ios(host);
	mmc_host_clk_release(host);
}

/*
 * Set initial state after a power cycle or a hw_reset.
 */
void mmc_set_initial_state(struct mmc_host *host)
{
	mmc_retune_disable(host);

	if (mmc_host_is_spi(host))
		host->ios.chip_select = MMC_CS_HIGH;
	else {
		host->ios.chip_select = MMC_CS_DONTCARE;
		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
	}
	host->ios.bus_width = MMC_BUS_WIDTH_1;
	host->ios.timing = MMC_TIMING_LEGACY;
	host->ios.drv_type = 0;
	host->ios.enhanced_strobe = false;

	/*
	 * Make sure we are in non-enhanced strobe mode before we
	 * actually enable it in ext_csd.
	 */
	if ((host->caps2 & MMC_CAP2_HS400_ES) &&
	     host->ops->hs400_enhanced_strobe)
		host->ops->hs400_enhanced_strobe(host, &host->ios);

	mmc_set_ios(host);
}

/**
 * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
 * @vdd:	voltage (mV)
 * @low_bits:	prefer low bits in boundary cases
 *
 * This function returns the OCR bit number according to the provided @vdd
 * value. If conversion is not possible a negative errno value returned.
 *
 * Depending on the @low_bits flag the function prefers low or high OCR bits
 * on boundary voltages. For example,
 * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
 * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
 *
 * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
 */
static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
{
	const int max_bit = ilog2(MMC_VDD_35_36);
	int bit;

	if (vdd < 1650 || vdd > 3600)
		return -EINVAL;

	if (vdd >= 1650 && vdd <= 1950)
		return ilog2(MMC_VDD_165_195);

	if (low_bits)
		vdd -= 1;

	/* Base 2000 mV, step 100 mV, bit's base 8. */
	bit = (vdd - 2000) / 100 + 8;
	if (bit > max_bit)
		return max_bit;
	return bit;
}

/**
 * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
 * @vdd_min:	minimum voltage value (mV)
 * @vdd_max:	maximum voltage value (mV)
 *
 * This function returns the OCR mask bits according to the provided @vdd_min
 * and @vdd_max values. If conversion is not possible the function returns 0.
 *
 * Notes wrt boundary cases:
 * This function sets the OCR bits for all boundary voltages, for example
 * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
 * MMC_VDD_34_35 mask.
 */
u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
{
	u32 mask = 0;

	if (vdd_max < vdd_min)
		return 0;

	/* Prefer high bits for the boundary vdd_max values. */
	vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
	if (vdd_max < 0)
		return 0;

	/* Prefer low bits for the boundary vdd_min values. */
	vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
	if (vdd_min < 0)
		return 0;

	/* Fill the mask, from max bit to min bit. */
	while (vdd_max >= vdd_min)
		mask |= 1 << vdd_max--;

	return mask;
}
EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);

#ifdef CONFIG_OF

/**
 * mmc_of_parse_voltage - return mask of supported voltages
 * @np: The device node need to be parsed.
 * @mask: mask of voltages available for MMC/SD/SDIO
 *
 * Parse the "voltage-ranges" DT property, returning zero if it is not
 * found, negative errno if the voltage-range specification is invalid,
 * or one if the voltage-range is specified and successfully parsed.
 */
int mmc_of_parse_voltage(struct device_node *np, u32 *mask)
{
	const u32 *voltage_ranges;
	int num_ranges, i;

	voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
	num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
	if (!voltage_ranges) {
		pr_debug("%s: voltage-ranges unspecified\n", np->full_name);
		return 0;
	}
	if (!num_ranges) {
		pr_err("%s: voltage-ranges empty\n", np->full_name);
		return -EINVAL;
	}

	for (i = 0; i < num_ranges; i++) {
		const int j = i * 2;
		u32 ocr_mask;

		ocr_mask = mmc_vddrange_to_ocrmask(
				be32_to_cpu(voltage_ranges[j]),
				be32_to_cpu(voltage_ranges[j + 1]));
		if (!ocr_mask) {
			pr_err("%s: voltage-range #%d is invalid\n",
				np->full_name, i);
			return -EINVAL;
		}
		*mask |= ocr_mask;
	}

	return 1;
}
EXPORT_SYMBOL(mmc_of_parse_voltage);

#endif /* CONFIG_OF */

static int mmc_of_get_func_num(struct device_node *node)
{
	u32 reg;
	int ret;

	ret = of_property_read_u32(node, "reg", &reg);
	if (ret < 0)
		return ret;

	return reg;
}

struct device_node *mmc_of_find_child_device(struct mmc_host *host,
		unsigned func_num)
{
	struct device_node *node;

	if (!host->parent || !host->parent->of_node)
		return NULL;

	for_each_child_of_node(host->parent->of_node, node) {
		if (mmc_of_get_func_num(node) == func_num)
			return node;
	}

	return NULL;
}

#ifdef CONFIG_REGULATOR

/**
 * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage
 * @vdd_bit:	OCR bit number
 * @min_uV:	minimum voltage value (mV)
 * @max_uV:	maximum voltage value (mV)
 *
 * This function returns the voltage range according to the provided OCR
 * bit number. If conversion is not possible a negative errno value returned.
 */
static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV)
{
	int		tmp;

	if (!vdd_bit)
		return -EINVAL;

	/*
	 * REVISIT mmc_vddrange_to_ocrmask() may have set some
	 * bits this regulator doesn't quite support ... don't
	 * be too picky, most cards and regulators are OK with
	 * a 0.1V range goof (it's a small error percentage).
	 */
	tmp = vdd_bit - ilog2(MMC_VDD_165_195);
	if (tmp == 0) {
		*min_uV = 1650 * 1000;
		*max_uV = 1950 * 1000;
	} else {
		*min_uV = 1900 * 1000 + tmp * 100 * 1000;
		*max_uV = *min_uV + 100 * 1000;
	}

	return 0;
}

/**
 * mmc_regulator_get_ocrmask - return mask of supported voltages
 * @supply: regulator to use
 *
 * This returns either a negative errno, or a mask of voltages that
 * can be provided to MMC/SD/SDIO devices using the specified voltage
 * regulator.  This would normally be called before registering the
 * MMC host adapter.
 */
int mmc_regulator_get_ocrmask(struct regulator *supply)
{
	int			result = 0;
	int			count;
	int			i;
	int			vdd_uV;
	int			vdd_mV;

	count = regulator_count_voltages(supply);
	if (count < 0)
		return count;

	for (i = 0; i < count; i++) {
		vdd_uV = regulator_list_voltage(supply, i);
		if (vdd_uV <= 0)
			continue;

		vdd_mV = vdd_uV / 1000;
		result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
	}

	if (!result) {
		vdd_uV = regulator_get_voltage(supply);
		if (vdd_uV <= 0)
			return vdd_uV;

		vdd_mV = vdd_uV / 1000;
		result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
	}

	return result;
}
EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);

/**
 * mmc_regulator_set_ocr - set regulator to match host->ios voltage
 * @mmc: the host to regulate
 * @supply: regulator to use
 * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
 *
 * Returns zero on success, else negative errno.
 *
 * MMC host drivers may use this to enable or disable a regulator using
 * a particular supply voltage.  This would normally be called from the
 * set_ios() method.
 */
int mmc_regulator_set_ocr(struct mmc_host *mmc,
			struct regulator *supply,
			unsigned short vdd_bit)
{
	int			result = 0;
	int			min_uV, max_uV;

	if (vdd_bit) {
		mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV);

		result = regulator_set_voltage(supply, min_uV, max_uV);
		if (result == 0 && !mmc->regulator_enabled) {
			result = regulator_enable(supply);
			if (!result)
				mmc->regulator_enabled = true;
		}
	} else if (mmc->regulator_enabled) {
		result = regulator_disable(supply);
		if (result == 0)
			mmc->regulator_enabled = false;
	}

	if (result)
		dev_err(mmc_dev(mmc),
			"could not set regulator OCR (%d)\n", result);
	return result;
}
EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);

static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
						  int min_uV, int target_uV,
						  int max_uV)
{
	/*
	 * Check if supported first to avoid errors since we may try several
	 * signal levels during power up and don't want to show errors.
	 */
	if (!regulator_is_supported_voltage(regulator, min_uV, max_uV))
		return -EINVAL;

	return regulator_set_voltage_triplet(regulator, min_uV, target_uV,
					     max_uV);
}

/**
 * mmc_regulator_set_vqmmc - Set VQMMC as per the ios
 *
 * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible.
 * That will match the behavior of old boards where VQMMC and VMMC were supplied
 * by the same supply.  The Bus Operating conditions for 3.3V signaling in the
 * SD card spec also define VQMMC in terms of VMMC.
 * If this is not possible we'll try the full 2.7-3.6V of the spec.
 *
 * For 1.2V and 1.8V signaling we'll try to get as close as possible to the
 * requested voltage.  This is definitely a good idea for UHS where there's a
 * separate regulator on the card that's trying to make 1.8V and it's best if
 * we match.
 *
 * This function is expected to be used by a controller's
 * start_signal_voltage_switch() function.
 */
int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
{
	struct device *dev = mmc_dev(mmc);
	int ret, volt, min_uV, max_uV;

	/* If no vqmmc supply then we can't change the voltage */
	if (IS_ERR(mmc->supply.vqmmc))
		return -EINVAL;

	switch (ios->signal_voltage) {
	case MMC_SIGNAL_VOLTAGE_120:
		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
						1100000, 1200000, 1300000);
	case MMC_SIGNAL_VOLTAGE_180:
		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
						1700000, 1800000, 1950000);
	case MMC_SIGNAL_VOLTAGE_330:
		ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV);
		if (ret < 0)
			return ret;

		dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n",
			__func__, volt, max_uV);

		min_uV = max(volt - 300000, 2700000);
		max_uV = min(max_uV + 200000, 3600000);

		/*
		 * Due to a limitation in the current implementation of
		 * regulator_set_voltage_triplet() which is taking the lowest
		 * voltage possible if below the target, search for a suitable
		 * voltage in two steps and try to stay close to vmmc
		 * with a 0.3V tolerance at first.
		 */
		if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
						min_uV, volt, max_uV))
			return 0;

		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
						2700000, volt, 3600000);
	default:
		return -EINVAL;
	}
}
EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc);

#endif /* CONFIG_REGULATOR */

int mmc_regulator_get_supply(struct mmc_host *mmc)
{
	struct device *dev = mmc_dev(mmc);
	int ret;

	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");

	if (IS_ERR(mmc->supply.vmmc)) {
		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		dev_dbg(dev, "No vmmc regulator found\n");
	} else {
		ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
		if (ret > 0)
			mmc->ocr_avail = ret;
		else
			dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
	}

	if (IS_ERR(mmc->supply.vqmmc)) {
		if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		dev_dbg(dev, "No vqmmc regulator found\n");
	}

	return 0;
}
EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);

/*
 * Mask off any voltages we don't support and select
 * the lowest voltage
 */
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
{
	int bit;

	/*
	 * Sanity check the voltages that the card claims to
	 * support.
	 */
	if (ocr & 0x7F) {
		dev_warn(mmc_dev(host),
		"card claims to support voltages below defined range\n");
		ocr &= ~0x7F;
	}

	ocr &= host->ocr_avail;
	if (!ocr) {
		dev_warn(mmc_dev(host), "no support for card's volts\n");
		return 0;
	}

	if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
		bit = ffs(ocr) - 1;
		ocr &= 3 << bit;
		mmc_power_cycle(host, ocr);
	} else {
		bit = fls(ocr) - 1;
		ocr &= 3 << bit;
		if (bit != host->ios.vdd)
			dev_warn(mmc_dev(host), "exceeding card's volts\n");
	}

	return ocr;
}

int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
{
	int err = 0;
	int old_signal_voltage = host->ios.signal_voltage;

	host->ios.signal_voltage = signal_voltage;
	if (host->ops->start_signal_voltage_switch) {
		mmc_host_clk_hold(host);
		err = host->ops->start_signal_voltage_switch(host, &host->ios);
		mmc_host_clk_release(host);
	}

	if (err)
		host->ios.signal_voltage = old_signal_voltage;

	return err;

}

int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
{
	struct mmc_command cmd = {0};
	int err = 0;
	u32 clock;

	BUG_ON(!host);

	/*
	 * Send CMD11 only if the request is to switch the card to
	 * 1.8V signalling.
	 */
	if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
		return __mmc_set_signal_voltage(host, signal_voltage);

	/*
	 * If we cannot switch voltages, return failure so the caller
	 * can continue without UHS mode
	 */
	if (!host->ops->start_signal_voltage_switch)
		return -EPERM;
	if (!host->ops->card_busy)
		pr_warn("%s: cannot verify signal voltage switch\n",
			mmc_hostname(host));

	cmd.opcode = SD_SWITCH_VOLTAGE;
	cmd.arg = 0;
	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

	/*
	 * Hold the clock reference so clock doesn't get auto gated during this
	 * voltage switch sequence.
	 */
	mmc_host_clk_hold(host);
	err = mmc_wait_for_cmd(host, &cmd, 0);
	if (err)
		goto err_command;

	if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) {
		err = -EIO;
		goto err_command;
	}
	/*
	 * The card should drive cmd and dat[0:3] low immediately
	 * after the response of cmd11, but wait 1 ms to be sure
	 */
	mmc_delay(1);
	if (host->ops->card_busy && !host->ops->card_busy(host)) {
		err = -EAGAIN;
		goto power_cycle;
	}
	/*
	 * During a signal voltage level switch, the clock must be gated
	 * for 5 ms according to the SD spec
	 */
	host->card_clock_off = true;
	clock = host->ios.clock;
	host->ios.clock = 0;
	mmc_set_ios(host);

	if (__mmc_set_signal_voltage(host, signal_voltage)) {
		/*
		 * Voltages may not have been switched, but we've already
		 * sent CMD11, so a power cycle is required anyway
		 */
		err = -EAGAIN;
		host->ios.clock = clock;
		mmc_set_ios(host);
		host->card_clock_off = false;
		goto power_cycle;
	}

	/* Keep clock gated for at least 10 ms, though spec only says 5 ms */
	mmc_delay(10);
	host->ios.clock = clock;
	mmc_set_ios(host);

	host->card_clock_off = false;
	/* Wait for at least 1 ms according to spec */
	mmc_delay(1);

	/*
	 * Failure to switch is indicated by the card holding
	 * dat[0:3] low
	 */
	if (host->ops->card_busy && host->ops->card_busy(host))
		err = -EAGAIN;

power_cycle:
	if (err) {
		pr_debug("%s: Signal voltage switch failed, "
			"power cycling card\n", mmc_hostname(host));
		mmc_power_cycle(host, ocr);
	}

err_command:
	mmc_host_clk_release(host);

	return err;
}

/*
 * Select timing parameters for host.
 */
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
{
	mmc_host_clk_hold(host);
	host->ios.timing = timing;
	mmc_set_ios(host);
	mmc_host_clk_release(host);
}

/*
 * Select appropriate driver type for host.
 */
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
{
	mmc_host_clk_hold(host);
	host->ios.drv_type = drv_type;
	mmc_set_ios(host);
	mmc_host_clk_release(host);
}

int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,
			      int card_drv_type, int *drv_type)
{
	struct mmc_host *host = card->host;
	int host_drv_type = SD_DRIVER_TYPE_B;
	int drive_strength;

	*drv_type = 0;

	if (!host->ops->select_drive_strength)
		return 0;

	/* Use SD definition of driver strength for hosts */
	if (host->caps & MMC_CAP_DRIVER_TYPE_A)
		host_drv_type |= SD_DRIVER_TYPE_A;

	if (host->caps & MMC_CAP_DRIVER_TYPE_C)
		host_drv_type |= SD_DRIVER_TYPE_C;

	if (host->caps & MMC_CAP_DRIVER_TYPE_D)
		host_drv_type |= SD_DRIVER_TYPE_D;

	/*
	 * The drive strength that the hardware can support
	 * depends on the board design.  Pass the appropriate
	 * information and let the hardware specific code
	 * return what is possible given the options
	 */
	mmc_host_clk_hold(host);
	drive_strength = host->ops->select_drive_strength(card, max_dtr,
							  host_drv_type,
							  card_drv_type,
							  drv_type);
	mmc_host_clk_release(host);

	return drive_strength;
}

/*
 * Apply power to the MMC stack.  This is a two-stage process.
 * First, we enable power to the card without the clock running.
 * We then wait a bit for the power to stabilise.  Finally,
 * enable the bus drivers and clock to the card.
 *
 * We must _NOT_ enable the clock prior to power stablising.
 *
 * If a host does all the power sequencing itself, ignore the
 * initial MMC_POWER_UP stage.
 */
void mmc_power_up(struct mmc_host *host, u32 ocr)
{
	if (host->ios.power_mode == MMC_POWER_ON)
		return;

	mmc_host_clk_hold(host);

	mmc_pwrseq_pre_power_on(host);

	host->ios.vdd = fls(ocr) - 1;
	host->ios.power_mode = MMC_POWER_UP;
	/* Set initial state and call mmc_set_ios */
	mmc_set_initial_state(host);

	/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
	if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
		dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");

	/*
	 * This delay should be sufficient to allow the power supply
	 * to reach the minimum voltage.
	 */
	mmc_delay(10);

	mmc_pwrseq_post_power_on(host);

	host->ios.clock = host->f_init;

	host->ios.power_mode = MMC_POWER_ON;
	mmc_set_ios(host);

	/*
	 * This delay must be at least 74 clock sizes, or 1 ms, or the
	 * time required to reach a stable voltage.
	 */
	mmc_delay(10);

	mmc_host_clk_release(host);
}

void mmc_power_off(struct mmc_host *host)
{
	if (host->ios.power_mode == MMC_POWER_OFF)
		return;

	mmc_host_clk_hold(host);

	mmc_pwrseq_power_off(host);

	host->ios.clock = 0;
	host->ios.vdd = 0;

	host->ios.power_mode = MMC_POWER_OFF;
	/* Set initial state and call mmc_set_ios */
	mmc_set_initial_state(host);

	/*
	 * Some configurations, such as the 802.11 SDIO card in the OLPC
	 * XO-1.5, require a short delay after poweroff before the card
	 * can be successfully turned on again.
	 */
	mmc_delay(1);

	mmc_host_clk_release(host);
}

void mmc_power_cycle(struct mmc_host *host, u32 ocr)
{
	mmc_power_off(host);
	/* Wait at least 1 ms according to SD spec */
	mmc_delay(1);
	mmc_power_up(host, ocr);
}

/*
 * Cleanup when the last reference to the bus operator is dropped.
 */
static void __mmc_release_bus(struct mmc_host *host)
{
	BUG_ON(!host);
	BUG_ON(host->bus_refs);
	BUG_ON(!host->bus_dead);

	host->bus_ops = NULL;
}

/*
 * Increase reference count of bus operator
 */
static inline void mmc_bus_get(struct mmc_host *host)
{
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);
	host->bus_refs++;
	spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Decrease reference count of bus operator and free it if
 * it is the last reference.
 */
static inline void mmc_bus_put(struct mmc_host *host)
{
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);
	host->bus_refs--;
	if ((host->bus_refs == 0) && host->bus_ops)
		__mmc_release_bus(host);
	spin_unlock_irqrestore(&host->lock, flags);
}

int mmc_resume_bus(struct mmc_host *host)
{
	unsigned long flags;
	int err = 0;

	if (!mmc_bus_needs_resume(host))
		return -EINVAL;

	pr_debug("%s: Starting deferred resume\n", mmc_hostname(host));
	spin_lock_irqsave(&host->lock, flags);
	host->bus_resume_flags &= ~MMC_BUSRESUME_NEEDS_RESUME;
	spin_unlock_irqrestore(&host->lock, flags);

	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead && host->card) {
		mmc_power_up(host, host->card->ocr);
		BUG_ON(!host->bus_ops->resume);
		host->bus_ops->resume(host);
		if (mmc_card_cmdq(host->card)) {
			err = mmc_cmdq_halt(host, false);
			if (err)
				pr_err("%s: %s: unhalt failed: %d\n",
				       mmc_hostname(host), __func__, err);
			else
				mmc_card_clr_suspended(host->card);
		}
	}

	mmc_bus_put(host);
	pr_debug("%s: Deferred resume completed\n", mmc_hostname(host));
	return 0;
}
EXPORT_SYMBOL(mmc_resume_bus);

/*
 * Assign a mmc bus handler to a host. Only one bus handler may control a
 * host at any given time.
 */
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
{
	unsigned long flags;

	BUG_ON(!host);
	BUG_ON(!ops);

	WARN_ON(!host->claimed);

	spin_lock_irqsave(&host->lock, flags);

	BUG_ON(host->bus_ops);
	BUG_ON(host->bus_refs);

	host->bus_ops = ops;
	host->bus_refs = 1;
	host->bus_dead = 0;

	spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Remove the current bus handler from a host.
 */
void mmc_detach_bus(struct mmc_host *host)
{
	unsigned long flags;

	BUG_ON(!host);

	WARN_ON(!host->claimed);
	WARN_ON(!host->bus_ops);

	spin_lock_irqsave(&host->lock, flags);

	host->bus_dead = 1;

	spin_unlock_irqrestore(&host->lock, flags);

	mmc_bus_put(host);
}

static void _mmc_detect_change(struct mmc_host *host, unsigned long delay,
				bool cd_irq)
{
#ifdef CONFIG_MMC_DEBUG
	unsigned long flags;
	spin_lock_irqsave(&host->lock, flags);
	WARN_ON(host->removed);
	spin_unlock_irqrestore(&host->lock, flags);
#endif

	/*
	 * If the device is configured as wakeup, we prevent a new sleep for
	 * 5 s to give provision for user space to consume the event.
	 */
	if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) &&
		device_can_wakeup(mmc_dev(host)))
		pm_wakeup_event(mmc_dev(host), 5000);

	host->detect_change = 1;
	/*
	 * Change in cd_gpio state, so make sure detection part is
	 * not overided because of manual resume.
	 */
	if (cd_irq && mmc_bus_manual_resume(host))
		host->ignore_bus_resume_flags = true;

	if (delayed_work_pending(&host->detect))
		cancel_delayed_work(&host->detect);

	mmc_schedule_delayed_work(&host->detect, delay);
}

/**
 *	mmc_detect_change - process change of state on a MMC socket
 *	@host: host which changed state.
 *	@delay: optional delay to wait before detection (jiffies)
 *
 *	MMC drivers should call this when they detect a card has been
 *	inserted or removed. The MMC layer will confirm that any
 *	present card is still functional, and initialize any newly
 *	inserted.
 */
void mmc_detect_change(struct mmc_host *host, unsigned long delay)
{
	_mmc_detect_change(host, delay, true);
}
EXPORT_SYMBOL(mmc_detect_change);

void mmc_init_erase(struct mmc_card *card)
{
	unsigned int sz;

	if (is_power_of_2(card->erase_size))
		card->erase_shift = ffs(card->erase_size) - 1;
	else
		card->erase_shift = 0;

	/*
	 * It is possible to erase an arbitrarily large area of an SD or MMC
	 * card.  That is not desirable because it can take a long time
	 * (minutes) potentially delaying more important I/O, and also the
	 * timeout calculations become increasingly hugely over-estimated.
	 * Consequently, 'pref_erase' is defined as a guide to limit erases
	 * to that size and alignment.
	 *
	 * For SD cards that define Allocation Unit size, limit erases to one
	 * Allocation Unit at a time.
	 * For MMC, have a stab at ai good value and for modern cards it will
	 * end up being 4MiB. Note that if the value is too small, it can end
	 * up taking longer to erase. Also note, erase_size is already set to
	 * High Capacity Erase Size if available when this function is called.
	 */
	if (mmc_card_sd(card) && card->ssr.au) {
		card->pref_erase = card->ssr.au;
		card->erase_shift = ffs(card->ssr.au) - 1;
	} else if (card->erase_size) {
		sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
		if (sz < 128)
			card->pref_erase = 512 * 1024 / 512;
		else if (sz < 512)
			card->pref_erase = 1024 * 1024 / 512;
		else if (sz < 1024)
			card->pref_erase = 2 * 1024 * 1024 / 512;
		else
			card->pref_erase = 4 * 1024 * 1024 / 512;
		if (card->pref_erase < card->erase_size)
			card->pref_erase = card->erase_size;
		else {
			sz = card->pref_erase % card->erase_size;
			if (sz)
				card->pref_erase += card->erase_size - sz;
		}
	} else
		card->pref_erase = 0;
}

static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
					  unsigned int arg, unsigned int qty)
{
	unsigned int erase_timeout;

	if (arg == MMC_DISCARD_ARG ||
	    (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) {
		erase_timeout = card->ext_csd.trim_timeout;
	} else if (card->ext_csd.erase_group_def & 1) {
		/* High Capacity Erase Group Size uses HC timeouts */
		if (arg == MMC_TRIM_ARG)
			erase_timeout = card->ext_csd.trim_timeout;
		else
			erase_timeout = card->ext_csd.hc_erase_timeout;
	} else {
		/* CSD Erase Group Size uses write timeout */
		unsigned int mult = (10 << card->csd.r2w_factor);
		unsigned int timeout_clks = card->csd.tacc_clks * mult;
		unsigned int timeout_us;

		/* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
		if (card->csd.tacc_ns < 1000000)
			timeout_us = (card->csd.tacc_ns * mult) / 1000;
		else
			timeout_us = (card->csd.tacc_ns / 1000) * mult;

		/*
		 * ios.clock is only a target.  The real clock rate might be
		 * less but not that much less, so fudge it by multiplying by 2.
		 */
		timeout_clks <<= 1;
		timeout_us += (timeout_clks * 1000) /
			      (mmc_host_clk_rate(card->host) / 1000);

		erase_timeout = timeout_us / 1000;

		/*
		 * Theoretically, the calculation could underflow so round up
		 * to 1ms in that case.
		 */
		if (!erase_timeout)
			erase_timeout = 1;
	}

	/* Multiplier for secure operations */
	if (arg & MMC_SECURE_ARGS) {
		if (arg == MMC_SECURE_ERASE_ARG)
			erase_timeout *= card->ext_csd.sec_erase_mult;
		else
			erase_timeout *= card->ext_csd.sec_trim_mult;
	}

	erase_timeout *= qty;

	/*
	 * Ensure at least a 1 second timeout for SPI as per
	 * 'mmc_set_data_timeout()'
	 */
	if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
		erase_timeout = 1000;

	return erase_timeout;
}

static unsigned int mmc_sd_erase_timeout(struct mmc_card *card,
					 unsigned int arg,
					 unsigned int qty)
{
	unsigned int erase_timeout;

	if (card->ssr.erase_timeout) {
		/* Erase timeout specified in SD Status Register (SSR) */
		erase_timeout = card->ssr.erase_timeout * qty +
				card->ssr.erase_offset;
	} else {
		/*
		 * Erase timeout not specified in SD Status Register (SSR) so
		 * use 250ms per write block.
		 */
		erase_timeout = 250 * qty;
	}

	/* Must not be less than 1 second */
	if (erase_timeout < 1000)
		erase_timeout = 1000;

	return erase_timeout;
}

static unsigned int mmc_erase_timeout(struct mmc_card *card,
				      unsigned int arg,
				      unsigned int qty)
{
	if (mmc_card_sd(card))
		return mmc_sd_erase_timeout(card, arg, qty);
	else
		return mmc_mmc_erase_timeout(card, arg, qty);
}

static u32 mmc_get_erase_qty(struct mmc_card *card, u32 from, u32 to)
{
	u32 qty = 0;

	/*
	 * qty is used to calculate the erase timeout which depends on how many
	 * erase groups (or allocation units in SD terminology) are affected.
	 * We count erasing part of an erase group as one erase group.
	 * For SD, the allocation units are always a power of 2.  For MMC, the
	 * erase group size is almost certainly also power of 2, but it does not
	 * seem to insist on that in the JEDEC standard, so we fall back to
	 * division in that case.  SD may not specify an allocation unit size,
	 * in which case the timeout is based on the number of write blocks.
	 *
	 * Note that the timeout for secure trim 2 will only be correct if the
	 * number of erase groups specified is the same as the total of all
	 * preceding secure trim 1 commands.  Since the power may have been
	 * lost since the secure trim 1 commands occurred, it is generally
	 * impossible to calculate the secure trim 2 timeout correctly.
	 */
	if (card->erase_shift)
		qty += ((to >> card->erase_shift) -
			(from >> card->erase_shift)) + 1;
	else if (mmc_card_sd(card))
		qty += to - from + 1;
	else
		qty += ((to / card->erase_size) -
			(from / card->erase_size)) + 1;
	return qty;
}

static int mmc_cmdq_send_erase_cmd(struct mmc_cmdq_req *cmdq_req,
		struct mmc_card *card, u32 opcode, u32 arg, u32 qty)
{
	struct mmc_command *cmd = cmdq_req->mrq.cmd;
	int err;

	memset(cmd, 0, sizeof(struct mmc_command));

	cmd->opcode = opcode;
	cmd->arg = arg;
	if (cmd->opcode == MMC_ERASE) {
		cmd->flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
		cmd->busy_timeout = mmc_erase_timeout(card, arg, qty);
	} else {
		cmd->flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	}

	err = mmc_cmdq_wait_for_dcmd(card->host, cmdq_req);
	if (err) {
		pr_err("mmc_erase: group start error %d, status %#x\n",
				err, cmd->resp[0]);
		return -EIO;
	}
	return 0;
}

static int mmc_cmdq_do_erase(struct mmc_cmdq_req *cmdq_req,
			struct mmc_card *card, unsigned int from,
			unsigned int to, unsigned int arg)
{
	struct mmc_command *cmd = cmdq_req->mrq.cmd;
	unsigned int qty = 0;
	unsigned long timeout;
	unsigned int fr, nr;
	int err;

	fr = from;
	nr = to - from + 1;

	qty = mmc_get_erase_qty(card, from, to);

	if (!mmc_card_blockaddr(card)) {
		from <<= 9;
		to <<= 9;
	}

	err = mmc_cmdq_send_erase_cmd(cmdq_req, card, MMC_ERASE_GROUP_START,
			from, qty);
	if (err)
		goto out;

	err = mmc_cmdq_send_erase_cmd(cmdq_req, card, MMC_ERASE_GROUP_END,
			to, qty);
	if (err)
		goto out;

	err = mmc_cmdq_send_erase_cmd(cmdq_req, card, MMC_ERASE,
			arg, qty);
	if (err)
		goto out;

	timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
	do {
		memset(cmd, 0, sizeof(struct mmc_command));
		cmd->opcode = MMC_SEND_STATUS;
		cmd->arg = card->rca << 16;
		cmd->flags = MMC_RSP_R1 | MMC_CMD_AC;
		/* Do not retry else we can't see errors */
		err = mmc_cmdq_wait_for_dcmd(card->host, cmdq_req);
		if (err || (cmd->resp[0] & 0xFDF92000)) {
			pr_err("error %d requesting status %#x\n",
				err, cmd->resp[0]);
			err = -EIO;
			goto out;
		}
		/* Timeout if the device never becomes ready for data and
		 * never leaves the program state.
		 */
		if (time_after(jiffies, timeout)) {
			pr_err("%s: Card stuck in programming state! %s\n",
				mmc_hostname(card->host), __func__);
			err =  -EIO;
			goto out;
		}
	} while (!(cmd->resp[0] & R1_READY_FOR_DATA) ||
		 (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG));
out:
	return err;
}

static int mmc_do_erase(struct mmc_card *card, unsigned int from,
			unsigned int to, unsigned int arg)
{
	struct mmc_command cmd = {0};
	unsigned int qty = 0, busy_timeout = 0;
	bool use_r1b_resp = false;
	unsigned long timeout;
	unsigned int fr, nr;
	int err;

	fr = from;
	nr = to - from + 1;

	qty = mmc_get_erase_qty(card, from, to);

	if (!mmc_card_blockaddr(card)) {
		from <<= 9;
		to <<= 9;
	}

	mmc_retune_hold(card->host);
	if (mmc_card_sd(card))
		cmd.opcode = SD_ERASE_WR_BLK_START;
	else
		cmd.opcode = MMC_ERASE_GROUP_START;
	cmd.arg = from;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	err = mmc_wait_for_cmd(card->host, &cmd, 0);
	if (err) {
		pr_err("mmc_erase: group start error %d, "
		       "status %#x\n", err, cmd.resp[0]);
		err = -EIO;
		goto out;
	}

	memset(&cmd, 0, sizeof(struct mmc_command));
	if (mmc_card_sd(card))
		cmd.opcode = SD_ERASE_WR_BLK_END;
	else
		cmd.opcode = MMC_ERASE_GROUP_END;
	cmd.arg = to;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	err = mmc_wait_for_cmd(card->host, &cmd, 0);
	if (err) {
		pr_err("mmc_erase: group end error %d, status %#x\n",
		       err, cmd.resp[0]);
		err = -EIO;
		goto out;
	}

	memset(&cmd, 0, sizeof(struct mmc_command));
	cmd.opcode = MMC_ERASE;
	cmd.arg = arg;
	busy_timeout = mmc_erase_timeout(card, arg, qty);
	/*
	 * If the host controller supports busy signalling and the timeout for
	 * the erase operation does not exceed the max_busy_timeout, we should
	 * use R1B response. Or we need to prevent the host from doing hw busy
	 * detection, which is done by converting to a R1 response instead.
	 */
	if (card->host->max_busy_timeout &&
	    busy_timeout > card->host->max_busy_timeout) {
		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	} else {
		cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
		cmd.busy_timeout = busy_timeout;
		use_r1b_resp = true;
	}

	err = mmc_wait_for_cmd(card->host, &cmd, 0);
	if (err) {
		pr_err("mmc_erase: erase error %d, status %#x\n",
		       err, cmd.resp[0]);
		err = -EIO;
		goto out;
	}

	if (mmc_host_is_spi(card->host))
		goto out;

	/*
	 * In case of when R1B + MMC_CAP_WAIT_WHILE_BUSY is used, the polling
	 * shall be avoided.
	 */
	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
		goto out;

	timeout = jiffies + msecs_to_jiffies(busy_timeout);
	do {
		memset(&cmd, 0, sizeof(struct mmc_command));
		cmd.opcode = MMC_SEND_STATUS;
		cmd.arg = card->rca << 16;
		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
		/* Do not retry else we can't see errors */
		err = mmc_wait_for_cmd(card->host, &cmd, 0);
		if (err || (cmd.resp[0] & 0xFDF92000)) {
			pr_err("error %d requesting status %#x\n",
				err, cmd.resp[0]);
			err = -EIO;
			goto out;
		}

		/* Timeout if the device never becomes ready for data and
		 * never leaves the program state.
		 */
		if (time_after(jiffies, timeout)) {
			pr_err("%s: Card stuck in programming state! %s\n",
				mmc_hostname(card->host), __func__);
			err =  -EIO;
			goto out;
		}

	} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
		 (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
out:
	mmc_retune_release(card->host);
	return err;
}

static unsigned int mmc_align_erase_size(struct mmc_card *card,
					 unsigned int *from,
					 unsigned int *to,
					 unsigned int nr)
{
	unsigned int from_new = *from, nr_new = nr, rem;

	/*
	 * When the 'card->erase_size' is power of 2, we can use round_up/down()
	 * to align the erase size efficiently.
	 */
	if (is_power_of_2(card->erase_size)) {
		unsigned int temp = from_new;

		from_new = round_up(temp, card->erase_size);
		rem = from_new - temp;

		if (nr_new > rem)
			nr_new -= rem;
		else
			return 0;

		nr_new = round_down(nr_new, card->erase_size);
	} else {
		rem = from_new % card->erase_size;
		if (rem) {
			rem = card->erase_size - rem;
			from_new += rem;
			if (nr_new > rem)
				nr_new -= rem;
			else
				return 0;
		}

		rem = nr_new % card->erase_size;
		if (rem)
			nr_new -= rem;
	}

	if (nr_new == 0)
		return 0;

	*to = from_new + nr_new;
	*from = from_new;

	return nr_new;
}

int mmc_erase_sanity_check(struct mmc_card *card, unsigned int from,
		unsigned int nr, unsigned int arg)
{

	if (!(card->host->caps & MMC_CAP_ERASE) ||
	    !(card->csd.cmdclass & CCC_ERASE))
		return -EOPNOTSUPP;

	if (!card->erase_size)
		return -EOPNOTSUPP;

	if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
		return -EOPNOTSUPP;

	if ((arg & MMC_SECURE_ARGS) &&
	    !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
		return -EOPNOTSUPP;

	if ((arg & MMC_TRIM_ARGS) &&
	    !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
		return -EOPNOTSUPP;

	if (arg == MMC_SECURE_ERASE_ARG) {
		if (from % card->erase_size || nr % card->erase_size)
			return -EINVAL;
	}
	return 0;
}

int mmc_cmdq_erase(struct mmc_cmdq_req *cmdq_req,
	      struct mmc_card *card, unsigned int from, unsigned int nr,
	      unsigned int arg)
{
	unsigned int rem, to = from + nr;
	int ret;

	ret = mmc_erase_sanity_check(card, from, nr, arg);
	if (ret)
		return ret;

	if (arg == MMC_ERASE_ARG) {
		rem = from % card->erase_size;
		if (rem) {
			rem = card->erase_size - rem;
			from += rem;
			if (nr > rem)
				nr -= rem;
			else
				return 0;
		}
		rem = nr % card->erase_size;
		if (rem)
			nr -= rem;
	}

	if (nr == 0)
		return 0;

	to = from + nr;

	if (to <= from)
		return -EINVAL;

	/* 'from' and 'to' are inclusive */
	to -= 1;

	return mmc_cmdq_do_erase(cmdq_req, card, from, to, arg);
}
EXPORT_SYMBOL(mmc_cmdq_erase);

/**
 * mmc_erase - erase sectors.
 * @card: card to erase
 * @from: first sector to erase
 * @nr: number of sectors to erase
 * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
 *
 * Caller must claim host before calling this function.
 */
int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
	      unsigned int arg)
{
	unsigned int rem, to = from + nr;
	int ret;

	ret = mmc_erase_sanity_check(card, from, nr, arg);
	if (ret)
		return ret;

	if (arg == MMC_ERASE_ARG)
		nr = mmc_align_erase_size(card, &from, &to, nr);

	if (nr == 0)
		return 0;

	if (to <= from)
		return -EINVAL;

	/* 'from' and 'to' are inclusive */
	to -= 1;

	/*
	 * Special case where only one erase-group fits in the timeout budget:
	 * If the region crosses an erase-group boundary on this particular
	 * case, we will be trimming more than one erase-group which, does not
	 * fit in the timeout budget of the controller, so we need to split it
	 * and call mmc_do_erase() twice if necessary. This special case is
	 * identified by the card->eg_boundary flag.
	 */
	rem = card->erase_size - (from % card->erase_size);
	if ((arg & MMC_TRIM_ARGS) && (card->eg_boundary) && (nr > rem)) {
		ret = mmc_do_erase(card, from, from + rem - 1, arg);
		from += rem;
		if ((ret) || (to <= from))
			return ret;
	}

	return mmc_do_erase(card, from, to, arg);
}
EXPORT_SYMBOL(mmc_erase);

int mmc_can_erase(struct mmc_card *card)
{
	if ((card->host->caps & MMC_CAP_ERASE) &&
	    (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
		return 1;
	return 0;
}
EXPORT_SYMBOL(mmc_can_erase);

int mmc_can_trim(struct mmc_card *card)
{
	if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) &&
	    (!(card->quirks & MMC_QUIRK_TRIM_BROKEN)))
		return 1;
	return 0;
}
EXPORT_SYMBOL(mmc_can_trim);

int mmc_can_discard(struct mmc_card *card)
{
	/*
	 * As there's no way to detect the discard support bit at v4.5
	 * use the s/w feature support filed.
	 */
	if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE)
		return 1;
	return 0;
}
EXPORT_SYMBOL(mmc_can_discard);

int mmc_can_sanitize(struct mmc_card *card)
{
	if (!mmc_can_trim(card) && !mmc_can_erase(card))
		return 0;
	if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
		return 1;
	return 0;
}
EXPORT_SYMBOL(mmc_can_sanitize);

int mmc_can_secure_erase_trim(struct mmc_card *card)
{
	if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) &&
	    !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
		return 1;
	return 0;
}
EXPORT_SYMBOL(mmc_can_secure_erase_trim);

int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
			    unsigned int nr)
{
	if (!card->erase_size)
		return 0;
	if (from % card->erase_size || nr % card->erase_size)
		return 0;
	return 1;
}
EXPORT_SYMBOL(mmc_erase_group_aligned);

static unsigned int mmc_do_calc_max_discard(struct mmc_card *card,
					    unsigned int arg)
{
	struct mmc_host *host = card->host;
	unsigned int max_discard, x, y, qty = 0, max_qty, min_qty, timeout;
	unsigned int last_timeout = 0;
	unsigned int max_busy_timeout = host->max_busy_timeout ?
			host->max_busy_timeout : MMC_ERASE_TIMEOUT_MS;

	if (card->erase_shift) {
		max_qty = UINT_MAX >> card->erase_shift;
		min_qty = card->pref_erase >> card->erase_shift;
	} else if (mmc_card_sd(card)) {
		max_qty = UINT_MAX;
		min_qty = card->pref_erase;
	} else {
		max_qty = UINT_MAX / card->erase_size;
		min_qty = card->pref_erase / card->erase_size;
	}

	/*
	 * We should not only use 'host->max_busy_timeout' as the limitation
	 * when deciding the max discard sectors. We should set a balance value
	 * to improve the erase speed, and it can not get too long timeout at
	 * the same time.
	 *
	 * Here we set 'card->pref_erase' as the minimal discard sectors no
	 * matter what size of 'host->max_busy_timeout', but if the
	 * 'host->max_busy_timeout' is large enough for more discard sectors,
	 * then we can continue to increase the max discard sectors until we
	 * get a balance value. In cases when the 'host->max_busy_timeout'
	 * isn't specified, use the default max erase timeout.
	 */
	do {
		y = 0;
		for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
			timeout = mmc_erase_timeout(card, arg, qty + x);

			if (qty + x > min_qty && timeout > max_busy_timeout)
				break;

			if (timeout < last_timeout)
				break;
			last_timeout = timeout;
			y = x;
		}
		qty += y;
	} while (y);

	if (!qty)
		return 0;

	/*
	 * When specifying a sector range to trim, chances are we might cross
	 * an erase-group boundary even if the amount of sectors is less than
	 * one erase-group.
	 * If we can only fit one erase-group in the controller timeout budget,
	 * we have to care that erase-group boundaries are not crossed by a
	 * single trim operation. We flag that special case with "eg_boundary".
	 * In all other cases we can just decrement qty and pretend that we
	 * always touch (qty + 1) erase-groups as a simple optimization.
	 */
	if (qty == 1)
		card->eg_boundary = 1;
	else
		qty--;

	/* Convert qty to sectors */
	if (card->erase_shift)
		max_discard = qty << card->erase_shift;
	else if (mmc_card_sd(card))
		max_discard = qty + 1;
	else
		max_discard = qty * card->erase_size;

	return max_discard;
}

unsigned int mmc_calc_max_discard(struct mmc_card *card)
{
	struct mmc_host *host = card->host;
	unsigned int max_discard, max_trim;

	if (!host->max_busy_timeout ||
			(host->caps2 & MMC_CAP2_MAX_DISCARD_SIZE))
		return UINT_MAX;

	/*
	 * Without erase_group_def set, MMC erase timeout depends on clock
	 * frequence which can change.  In that case, the best choice is
	 * just the preferred erase size.
	 */
	if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1))
		return card->pref_erase;

	max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG);
	if (mmc_can_trim(card)) {
		max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG);
		if (max_trim < max_discard)
			max_discard = max_trim;
	} else if (max_discard < card->erase_size) {
		max_discard = 0;
	}
	pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
		mmc_hostname(host), max_discard, host->max_busy_timeout ?
		host->max_busy_timeout : MMC_ERASE_TIMEOUT_MS);
	return max_discard;
}
EXPORT_SYMBOL(mmc_calc_max_discard);

int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
{
	struct mmc_command cmd = {0};

	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
	    mmc_card_hs400(card) || mmc_card_hs400es(card))
		return 0;

	cmd.opcode = MMC_SET_BLOCKLEN;
	cmd.arg = blocklen;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	return mmc_wait_for_cmd(card->host, &cmd, 5);
}
EXPORT_SYMBOL(mmc_set_blocklen);

int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
			bool is_rel_write)
{
	struct mmc_command cmd = {0};

	cmd.opcode = MMC_SET_BLOCK_COUNT;
	cmd.arg = blockcount & 0x0000FFFF;
	if (is_rel_write)
		cmd.arg |= 1 << 31;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
	return mmc_wait_for_cmd(card->host, &cmd, 5);
}
EXPORT_SYMBOL(mmc_set_blockcount);

static void mmc_hw_reset_for_init(struct mmc_host *host)
{
	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
		return;
	mmc_host_clk_hold(host);
	host->ops->hw_reset(host);
	mmc_host_clk_release(host);
}

/*
 * mmc_cmdq_hw_reset: Helper API for doing
 * reset_all of host and reinitializing card.
 * This must be called with mmc_claim_host
 * acquired by the caller.
 */
int mmc_cmdq_hw_reset(struct mmc_host *host)
{
	if (!host->bus_ops->reset)
		return -EOPNOTSUPP;

	return host->bus_ops->reset(host);
}
EXPORT_SYMBOL(mmc_cmdq_hw_reset);

int mmc_hw_reset(struct mmc_host *host)
{
	int ret;

	if (!host->card)
		return -EINVAL;

	mmc_bus_get(host);
	if (!host->bus_ops || host->bus_dead || !host->bus_ops->reset) {
		mmc_bus_put(host);
		return -EOPNOTSUPP;
	}

	ret = host->bus_ops->reset(host);
	mmc_bus_put(host);

	if (ret)
		pr_warn("%s: tried to reset card, got error %d\n",
			mmc_hostname(host), ret);

	return ret;
}
EXPORT_SYMBOL(mmc_hw_reset);

static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
	host->f_init = freq;

#ifdef CONFIG_MMC_DEBUG
	pr_info("%s: %s: trying to init card at %u Hz\n",
		mmc_hostname(host), __func__, host->f_init);
#endif
	mmc_power_up(host, host->ocr_avail);

	/*
	 * Some eMMCs (with VCCQ always on) may not be reset after power up, so
	 * do a hardware reset if possible.
	 */
	mmc_hw_reset_for_init(host);

	/*
	 * sdio_reset sends CMD52 to reset card.  Since we do not know
	 * if the card is being re-initialized, just send it.  CMD52
	 * should be ignored by SD/eMMC cards.
	 * Skip it if we already know that we do not support SDIO commands
	 */
	if (!(host->caps2 & MMC_CAP2_NO_SDIO))
		sdio_reset(host);

	mmc_go_idle(host);

	if (!(host->caps2 & MMC_CAP2_NO_SD))
		mmc_send_if_cond(host, host->ocr_avail);

	/* Order's important: probe SDIO, then SD, then MMC */
	if (!(host->caps2 & MMC_CAP2_NO_SDIO))
		if (!mmc_attach_sdio(host))
			return 0;

	if (!(host->caps2 & MMC_CAP2_NO_SD))
		if (!mmc_attach_sd(host))
			return 0;

	if (!(host->caps2 & MMC_CAP2_NO_MMC))
		if (!mmc_attach_mmc(host))
			return 0;

	mmc_power_off(host);
	return -EIO;
}

int _mmc_detect_card_removed(struct mmc_host *host)
{
	int ret;

	if (!host->card || mmc_card_removed(host->card))
		return 1;

	ret = host->bus_ops->alive(host);

	/*
	 * Card detect status and alive check may be out of sync if card is
	 * removed slowly, when card detect switch changes while card/slot
	 * pads are still contacted in hardware (refer to "SD Card Mechanical
	 * Addendum, Appendix C: Card Detection Switch"). So reschedule a
	 * detect work 200ms later for this case.
	 */
	if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) {
		mmc_detect_change(host, msecs_to_jiffies(200));
		pr_debug("%s: card removed too slowly\n", mmc_hostname(host));
	}

	if (ret) {
		if (host->ops->get_cd && host->ops->get_cd(host)) {
			ret = mmc_recovery_fallback_lower_speed(host);
		} else {
			mmc_card_set_removed(host->card);
			if (host->card->sdr104_blocked) {
				mmc_host_set_sdr104(host);
				host->card->sdr104_blocked = false;
			}
			pr_debug("%s: card remove detected\n",
					mmc_hostname(host));
		}
	}

	return ret;
}

int mmc_detect_card_removed(struct mmc_host *host)
{
	struct mmc_card *card = host->card;
	int ret;

	WARN_ON(!host->claimed);

	if (!card)
		return 1;

	if (!mmc_card_is_removable(host))
		return 0;

	ret = mmc_card_removed(card);
	/*
	 * The card will be considered unchanged unless we have been asked to
	 * detect a change or host requires polling to provide card detection.
	 */
	if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL))
		return ret;

	host->detect_change = 0;
	if (!ret) {
		ret = _mmc_detect_card_removed(host);
		if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) {
			/*
			 * Schedule a detect work as soon as possible to let a
			 * rescan handle the card removal.
			 */
			cancel_delayed_work(&host->detect);
			_mmc_detect_change(host, 0, false);
		}
	}

	return ret;
}
EXPORT_SYMBOL(mmc_detect_card_removed);

/*
 * This should be called to make sure that detect work(mmc_rescan)
 * is completed.Drivers may use this function from async schedule/probe
 * contexts to make sure that the bootdevice detection is completed on
 * completion of async_schedule.
 */
void mmc_flush_detect_work(struct mmc_host *host)
{
	flush_delayed_work(&host->detect);
}
EXPORT_SYMBOL(mmc_flush_detect_work);

void mmc_rescan(struct work_struct *work)
{
	unsigned long flags;
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);

	spin_lock_irqsave(&host->lock, flags);
	if (host->rescan_disable) {
		spin_unlock_irqrestore(&host->lock, flags);
		return;
	}
	spin_unlock_irqrestore(&host->lock, flags);

	/* If there is a non-removable card registered, only scan once */
	if (!mmc_card_is_removable(host) && host->rescan_entered)
		return;
	host->rescan_entered = 1;

	if (host->trigger_card_event && host->ops->card_event) {
		mmc_claim_host(host);
		host->ops->card_event(host);
		mmc_release_host(host);
		host->trigger_card_event = false;
	}

	mmc_bus_get(host);

	/*
	 * if there is a _removable_ card registered, check whether it is
	 * still present
	 */
	if (host->bus_ops && !host->bus_dead && mmc_card_is_removable(host))
		host->bus_ops->detect(host);

	host->detect_change = 0;
	if (host->ignore_bus_resume_flags)
		host->ignore_bus_resume_flags = false;

	/*
	 * Let mmc_bus_put() free the bus/bus_ops if we've found that
	 * the card is no longer present.
	 */
	mmc_bus_put(host);
	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	mmc_claim_host(host);
	if (mmc_card_is_removable(host) && host->ops->get_cd &&
			host->ops->get_cd(host) == 0) {
		mmc_power_off(host);
		mmc_release_host(host);
		goto out;
	}
	mmc_rescan_try_freq(host, host->f_min);
	host->err_stats[MMC_ERR_CMD_TIMEOUT] = 0;
	mmc_release_host(host);

 out:
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}

void mmc_start_host(struct mmc_host *host)
{
	mmc_claim_host(host);
	host->f_init = max(freqs[0], host->f_min);
	host->rescan_disable = 0;
	host->ios.power_mode = MMC_POWER_UNDEFINED;

	if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
		mmc_power_off(host);
	else
		mmc_power_up(host, host->ocr_avail);

	mmc_gpiod_request_cd_irq(host);
	mmc_register_extcon(host);
	mmc_release_host(host);
	_mmc_detect_change(host, 0, false);
}

void mmc_stop_host(struct mmc_host *host)
{
#ifdef CONFIG_MMC_DEBUG
	unsigned long flags;
	spin_lock_irqsave(&host->lock, flags);
	host->removed = 1;
	spin_unlock_irqrestore(&host->lock, flags);
#endif
	if (host->slot.cd_irq >= 0)
		disable_irq(host->slot.cd_irq);

	host->rescan_disable = 1;
	cancel_delayed_work_sync(&host->detect);

	/* clear pm flags now and let card drivers set them as needed */
	host->pm_flags = 0;

	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead) {
		/* Calling bus_ops->remove() with a claimed host can deadlock */
		host->bus_ops->remove(host);
		mmc_claim_host(host);
		mmc_detach_bus(host);
		mmc_power_off(host);
		mmc_release_host(host);
		mmc_bus_put(host);
		return;
	}
	mmc_bus_put(host);

	BUG_ON(host->card);

	mmc_unregister_extcon(host);

	mmc_claim_host(host);
	mmc_power_off(host);
	mmc_release_host(host);
}

int mmc_power_save_host(struct mmc_host *host)
{
	int ret = 0;

#ifdef CONFIG_MMC_DEBUG
	pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__);
#endif

	mmc_bus_get(host);

	if (!host->bus_ops || host->bus_dead) {
		mmc_bus_put(host);
		return -EINVAL;
	}

	if (host->bus_ops->power_save)
		ret = host->bus_ops->power_save(host);

	mmc_bus_put(host);

	mmc_power_off(host);

	return ret;
}
EXPORT_SYMBOL(mmc_power_save_host);

int mmc_power_restore_host(struct mmc_host *host)
{
	int ret;

#ifdef CONFIG_MMC_DEBUG
	pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__);
#endif

	mmc_bus_get(host);

	if (!host->bus_ops || host->bus_dead) {
		mmc_bus_put(host);
		return -EINVAL;
	}

	mmc_power_up(host, host->card->ocr);
	mmc_claim_host(host);
	ret = host->bus_ops->power_restore(host);
	mmc_release_host(host);

	mmc_bus_put(host);

	return ret;
}
EXPORT_SYMBOL(mmc_power_restore_host);

/*
 * Add barrier request to the requests in cache
 */
int mmc_cache_barrier(struct mmc_card *card)
{
	struct mmc_host *host = card->host;
	int err = 0;

	if (!card->ext_csd.cache_ctrl ||
	     (card->quirks & MMC_QUIRK_CACHE_DISABLE))
		goto out;

	if (!mmc_card_mmc(card))
		goto out;

	if (!card->ext_csd.barrier_en)
		return -ENOTSUPP;

	/*
	 * If a device receives maximum supported barrier
	 * requests, a barrier command is treated as a
	 * flush command. Hence, it is betetr to use
	 * flush timeout instead a generic CMD6 timeout
	 */
	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
			EXT_CSD_FLUSH_CACHE, 0x2, 0);
	if (err)
		pr_err("%s: cache barrier error %d\n",
				mmc_hostname(host), err);
out:
	return err;
}
EXPORT_SYMBOL(mmc_cache_barrier);

/*
 * Flush the cache to the non-volatile storage.
 */
int mmc_flush_cache(struct mmc_card *card)
{
	int err = 0;

	if (mmc_card_mmc(card) &&
			(card->ext_csd.cache_size > 0) &&
			(card->ext_csd.cache_ctrl & 1) &&
			(!(card->quirks & MMC_QUIRK_CACHE_DISABLE))) {
		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
				EXT_CSD_FLUSH_CACHE, 1, 0);
		if (err == -ETIMEDOUT) {
			pr_err("%s: cache flush timeout\n",
					mmc_hostname(card->host));
			err = mmc_interrupt_hpi(card);
			if (err) {
				pr_err("%s: mmc_interrupt_hpi() failed (%d)\n",
						mmc_hostname(card->host), err);
				err = -ENODEV;
			}
		} else if (err) {
			pr_err("%s: cache flush error %d\n",
					mmc_hostname(card->host), err);
		}
	}

	return err;
}
EXPORT_SYMBOL(mmc_flush_cache);

#ifdef CONFIG_PM_SLEEP
/* Do the card removal on suspend if card is assumed removeable
 * Do that in pm notifier while userspace isn't yet frozen, so we will be able
   to sync the card.
*/
static int mmc_pm_notify(struct notifier_block *notify_block,
			unsigned long mode, void *unused)
{
	struct mmc_host *host = container_of(
		notify_block, struct mmc_host, pm_notify);
	unsigned long flags;
	int err = 0;

	switch (mode) {
	case PM_HIBERNATION_PREPARE:
	case PM_SUSPEND_PREPARE:
	case PM_RESTORE_PREPARE:
		spin_lock_irqsave(&host->lock, flags);
		host->rescan_disable = 1;
		spin_unlock_irqrestore(&host->lock, flags);
		cancel_delayed_work_sync(&host->detect);

		if (!host->bus_ops)
			break;

		/* Validate prerequisites for suspend */
		if (host->bus_ops->pre_suspend)
			err = host->bus_ops->pre_suspend(host);
		if (!err)
			break;

		/* Calling bus_ops->remove() with a claimed host can deadlock */
		host->bus_ops->remove(host);
		mmc_claim_host(host);
		mmc_detach_bus(host);
		mmc_power_off(host);
		mmc_release_host(host);
		host->pm_flags = 0;
		break;

	case PM_POST_SUSPEND:
	case PM_POST_HIBERNATION:
	case PM_POST_RESTORE:

		spin_lock_irqsave(&host->lock, flags);
		host->rescan_disable = 0;
		if (mmc_bus_manual_resume(host) &&
				!host->ignore_bus_resume_flags) {
			spin_unlock_irqrestore(&host->lock, flags);
			break;
		}
		spin_unlock_irqrestore(&host->lock, flags);
		_mmc_detect_change(host, 0, false);

	}

	return 0;
}

void mmc_register_pm_notifier(struct mmc_host *host)
{
	host->pm_notify.notifier_call = mmc_pm_notify;
	register_pm_notifier(&host->pm_notify);
}

void mmc_unregister_pm_notifier(struct mmc_host *host)
{
	unregister_pm_notifier(&host->pm_notify);
}
#endif

/**
 * mmc_init_context_info() - init synchronization context
 * @host: mmc host
 *
 * Init struct context_info needed to implement asynchronous
 * request mechanism, used by mmc core, host driver and mmc requests
 * supplier.
 */
void mmc_init_context_info(struct mmc_host *host)
{
	spin_lock_init(&host->context_info.lock);
	host->context_info.is_new_req = false;
	host->context_info.is_done_rcv = false;
	host->context_info.is_waiting_last_req = false;
	init_waitqueue_head(&host->context_info.wait);
}

#ifdef CONFIG_MMC_EMBEDDED_SDIO
void mmc_set_embedded_sdio_data(struct mmc_host *host,
				struct sdio_cis *cis,
				struct sdio_cccr *cccr,
				struct sdio_embedded_func *funcs,
				int num_funcs)
{
	host->embedded_sdio_data.cis = cis;
	host->embedded_sdio_data.cccr = cccr;
	host->embedded_sdio_data.funcs = funcs;
	host->embedded_sdio_data.num_funcs = num_funcs;
}

EXPORT_SYMBOL(mmc_set_embedded_sdio_data);
#endif

static int __init mmc_init(void)
{
	int ret;

	ret = mmc_register_bus();
	if (ret)
		return ret;

	ret = mmc_register_host_class();
	if (ret)
		goto unregister_bus;

	ret = sdio_register_bus();
	if (ret)
		goto unregister_host_class;

	return 0;

unregister_host_class:
	mmc_unregister_host_class();
unregister_bus:
	mmc_unregister_bus();
	return ret;
}

static void __exit mmc_exit(void)
{
	sdio_unregister_bus();
	mmc_unregister_host_class();
	mmc_unregister_bus();
}

#ifdef CONFIG_BLOCK
static ssize_t
latency_hist_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct mmc_host *host = cls_dev_to_mmc_host(dev);

	return blk_latency_hist_show(&host->io_lat_s, buf);
}

/*
 * Values permitted 0, 1, 2.
 * 0 -> Disable IO latency histograms (default)
 * 1 -> Enable IO latency histograms
 * 2 -> Zero out IO latency histograms
 */
static ssize_t
latency_hist_store(struct device *dev, struct device_attribute *attr,
		   const char *buf, size_t count)
{
	struct mmc_host *host = cls_dev_to_mmc_host(dev);
	long value;

	if (kstrtol(buf, 0, &value))
		return -EINVAL;
	if (value == BLK_IO_LAT_HIST_ZERO)
		blk_zero_latency_hist(&host->io_lat_s);
	else if (value == BLK_IO_LAT_HIST_ENABLE ||
		 value == BLK_IO_LAT_HIST_DISABLE)
		host->latency_hist_enabled = value;
	return count;
}

static DEVICE_ATTR(latency_hist, S_IRUGO | S_IWUSR,
		   latency_hist_show, latency_hist_store);

void
mmc_latency_hist_sysfs_init(struct mmc_host *host)
{
	if (device_create_file(&host->class_dev, &dev_attr_latency_hist))
		dev_err(&host->class_dev,
			"Failed to create latency_hist sysfs entry\n");
}

void
mmc_latency_hist_sysfs_exit(struct mmc_host *host)
{
	device_remove_file(&host->class_dev, &dev_attr_latency_hist);
}
#endif

subsys_initcall(mmc_init);
module_exit(mmc_exit);

MODULE_LICENSE("GPL");