| /* |
| * Copyright (C) 2014 Linaro Ltd. |
| * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * PCC (Platform Communication Channel) is defined in the ACPI 5.0+ |
| * specification. It is a mailbox like mechanism to allow clients |
| * such as CPPC (Collaborative Processor Performance Control), RAS |
| * (Reliability, Availability and Serviceability) and MPST (Memory |
| * Node Power State Table) to talk to the platform (e.g. BMC) through |
| * shared memory regions as defined in the PCC table entries. The PCC |
| * specification supports a Doorbell mechanism for the PCC clients |
| * to notify the platform about new data. This Doorbell information |
| * is also specified in each PCC table entry. See pcc_send_data() |
| * and pcc_tx_done() for basic mode of operation. |
| * |
| * For more details about PCC, please see the ACPI specification from |
| * http://www.uefi.org/ACPIv5.1 Section 14. |
| * |
| * This file implements PCC as a Mailbox controller and allows for PCC |
| * clients to be implemented as its Mailbox Client Channels. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| #include <linux/mailbox_controller.h> |
| #include <linux/mailbox_client.h> |
| |
| #include "mailbox.h" |
| |
| #define MAX_PCC_SUBSPACES 256 |
| #define PCCS_SS_SIG_MAGIC 0x50434300 |
| #define PCC_CMD_COMPLETE 0x1 |
| |
| static struct mbox_chan *pcc_mbox_channels; |
| |
| static struct mbox_controller pcc_mbox_ctrl = {}; |
| /** |
| * get_pcc_channel - Given a PCC subspace idx, get |
| * the respective mbox_channel. |
| * @id: PCC subspace index. |
| * |
| * Return: ERR_PTR(errno) if error, else pointer |
| * to mbox channel. |
| */ |
| static struct mbox_chan *get_pcc_channel(int id) |
| { |
| struct mbox_chan *pcc_chan; |
| |
| if (id < 0 || id > pcc_mbox_ctrl.num_chans) |
| return ERR_PTR(-ENOENT); |
| |
| pcc_chan = (struct mbox_chan *) |
| (unsigned long) pcc_mbox_channels + |
| (id * sizeof(*pcc_chan)); |
| |
| return pcc_chan; |
| } |
| |
| /** |
| * get_subspace_id - Given a Mailbox channel, find out the |
| * PCC subspace id. |
| * @chan: Pointer to Mailbox Channel from which we want |
| * the index. |
| * Return: Errno if not found, else positive index number. |
| */ |
| static int get_subspace_id(struct mbox_chan *chan) |
| { |
| unsigned int id = chan - pcc_mbox_channels; |
| |
| if (id < 0 || id > pcc_mbox_ctrl.num_chans) |
| return -ENOENT; |
| |
| return id; |
| } |
| |
| /** |
| * pcc_mbox_request_channel - PCC clients call this function to |
| * request a pointer to their PCC subspace, from which they |
| * can get the details of communicating with the remote. |
| * @cl: Pointer to Mailbox client, so we know where to bind the |
| * Channel. |
| * @subspace_id: The PCC Subspace index as parsed in the PCC client |
| * ACPI package. This is used to lookup the array of PCC |
| * subspaces as parsed by the PCC Mailbox controller. |
| * |
| * Return: Pointer to the Mailbox Channel if successful or |
| * ERR_PTR. |
| */ |
| struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, |
| int subspace_id) |
| { |
| struct device *dev = pcc_mbox_ctrl.dev; |
| struct mbox_chan *chan; |
| unsigned long flags; |
| |
| /* |
| * Each PCC Subspace is a Mailbox Channel. |
| * The PCC Clients get their PCC Subspace ID |
| * from their own tables and pass it here. |
| * This returns a pointer to the PCC subspace |
| * for the Client to operate on. |
| */ |
| chan = get_pcc_channel(subspace_id); |
| |
| if (!chan || chan->cl) { |
| dev_err(dev, "%s: PCC mailbox not free\n", __func__); |
| return ERR_PTR(-EBUSY); |
| } |
| |
| spin_lock_irqsave(&chan->lock, flags); |
| chan->msg_free = 0; |
| chan->msg_count = 0; |
| chan->active_req = NULL; |
| chan->cl = cl; |
| init_completion(&chan->tx_complete); |
| |
| if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone) |
| chan->txdone_method |= TXDONE_BY_ACK; |
| |
| spin_unlock_irqrestore(&chan->lock, flags); |
| |
| return chan; |
| } |
| EXPORT_SYMBOL_GPL(pcc_mbox_request_channel); |
| |
| /** |
| * pcc_mbox_free_channel - Clients call this to free their Channel. |
| * |
| * @chan: Pointer to the mailbox channel as returned by |
| * pcc_mbox_request_channel() |
| */ |
| void pcc_mbox_free_channel(struct mbox_chan *chan) |
| { |
| unsigned long flags; |
| |
| if (!chan || !chan->cl) |
| return; |
| |
| spin_lock_irqsave(&chan->lock, flags); |
| chan->cl = NULL; |
| chan->active_req = NULL; |
| if (chan->txdone_method == (TXDONE_BY_POLL | TXDONE_BY_ACK)) |
| chan->txdone_method = TXDONE_BY_POLL; |
| |
| spin_unlock_irqrestore(&chan->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(pcc_mbox_free_channel); |
| |
| /** |
| * pcc_tx_done - Callback from Mailbox controller code to |
| * check if PCC message transmission completed. |
| * @chan: Pointer to Mailbox channel on which previous |
| * transmission occurred. |
| * |
| * Return: TRUE if succeeded. |
| */ |
| static bool pcc_tx_done(struct mbox_chan *chan) |
| { |
| struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv; |
| struct acpi_pcct_shared_memory *generic_comm_base = |
| (struct acpi_pcct_shared_memory *) pcct_ss->base_address; |
| u16 cmd_delay = pcct_ss->latency; |
| unsigned int retries = 0; |
| |
| /* Try a few times while waiting for platform to consume */ |
| while (!(readw_relaxed(&generic_comm_base->status) |
| & PCC_CMD_COMPLETE)) { |
| |
| if (retries++ < 5) |
| udelay(cmd_delay); |
| else { |
| /* |
| * If the remote is dead, this will cause the Mbox |
| * controller to timeout after mbox client.tx_tout |
| * msecs. |
| */ |
| pr_err("PCC platform did not respond.\n"); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /** |
| * pcc_send_data - Called from Mailbox Controller code to finally |
| * transmit data over channel. |
| * @chan: Pointer to Mailbox channel over which to send data. |
| * @data: Actual data to be written over channel. |
| * |
| * Return: Err if something failed else 0 for success. |
| */ |
| static int pcc_send_data(struct mbox_chan *chan, void *data) |
| { |
| struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv; |
| struct acpi_pcct_shared_memory *generic_comm_base = |
| (struct acpi_pcct_shared_memory *) pcct_ss->base_address; |
| struct acpi_generic_address doorbell; |
| u64 doorbell_preserve; |
| u64 doorbell_val; |
| u64 doorbell_write; |
| u16 cmd = *(u16 *) data; |
| u16 ss_idx = -1; |
| |
| ss_idx = get_subspace_id(chan); |
| |
| if (ss_idx < 0) { |
| pr_err("Invalid Subspace ID from PCC client\n"); |
| return -EINVAL; |
| } |
| |
| doorbell = pcct_ss->doorbell_register; |
| doorbell_preserve = pcct_ss->preserve_mask; |
| doorbell_write = pcct_ss->write_mask; |
| |
| /* Write to the shared comm region. */ |
| writew(cmd, &generic_comm_base->command); |
| |
| /* Write Subspace MAGIC value so platform can identify destination. */ |
| writel((PCCS_SS_SIG_MAGIC | ss_idx), &generic_comm_base->signature); |
| |
| /* Flip CMD COMPLETE bit */ |
| writew(0, &generic_comm_base->status); |
| |
| /* Sync notification from OSPM to Platform. */ |
| acpi_read(&doorbell_val, &doorbell); |
| acpi_write((doorbell_val & doorbell_preserve) | doorbell_write, |
| &doorbell); |
| |
| return 0; |
| } |
| |
| static struct mbox_chan_ops pcc_chan_ops = { |
| .send_data = pcc_send_data, |
| .last_tx_done = pcc_tx_done, |
| }; |
| |
| /** |
| * parse_pcc_subspace - Parse the PCC table and verify PCC subspace |
| * entries. There should be one entry per PCC client. |
| * @header: Pointer to the ACPI subtable header under the PCCT. |
| * @end: End of subtable entry. |
| * |
| * Return: 0 for Success, else errno. |
| * |
| * This gets called for each entry in the PCC table. |
| */ |
| static int parse_pcc_subspace(struct acpi_subtable_header *header, |
| const unsigned long end) |
| { |
| struct acpi_pcct_hw_reduced *pcct_ss; |
| |
| if (pcc_mbox_ctrl.num_chans <= MAX_PCC_SUBSPACES) { |
| pcct_ss = (struct acpi_pcct_hw_reduced *) header; |
| |
| if (pcct_ss->header.type != |
| ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE) { |
| pr_err("Incorrect PCC Subspace type detected\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * acpi_pcc_probe - Parse the ACPI tree for the PCCT. |
| * |
| * Return: 0 for Success, else errno. |
| */ |
| static int __init acpi_pcc_probe(void) |
| { |
| acpi_size pcct_tbl_header_size; |
| struct acpi_table_header *pcct_tbl; |
| struct acpi_subtable_header *pcct_entry; |
| int count, i; |
| acpi_status status = AE_OK; |
| |
| /* Search for PCCT */ |
| status = acpi_get_table_with_size(ACPI_SIG_PCCT, 0, |
| &pcct_tbl, |
| &pcct_tbl_header_size); |
| |
| if (ACPI_FAILURE(status) || !pcct_tbl) { |
| pr_warn("PCCT header not found.\n"); |
| return -ENODEV; |
| } |
| |
| count = acpi_table_parse_entries(ACPI_SIG_PCCT, |
| sizeof(struct acpi_table_pcct), |
| ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE, |
| parse_pcc_subspace, MAX_PCC_SUBSPACES); |
| |
| if (count <= 0) { |
| pr_err("Error parsing PCC subspaces from PCCT\n"); |
| return -EINVAL; |
| } |
| |
| pcc_mbox_channels = kzalloc(sizeof(struct mbox_chan) * |
| count, GFP_KERNEL); |
| |
| if (!pcc_mbox_channels) { |
| pr_err("Could not allocate space for PCC mbox channels\n"); |
| return -ENOMEM; |
| } |
| |
| /* Point to the first PCC subspace entry */ |
| pcct_entry = (struct acpi_subtable_header *) ( |
| (unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct)); |
| |
| for (i = 0; i < count; i++) { |
| pcc_mbox_channels[i].con_priv = pcct_entry; |
| pcct_entry = (struct acpi_subtable_header *) |
| ((unsigned long) pcct_entry + pcct_entry->length); |
| } |
| |
| pcc_mbox_ctrl.num_chans = count; |
| |
| pr_info("Detected %d PCC Subspaces\n", pcc_mbox_ctrl.num_chans); |
| |
| return 0; |
| } |
| |
| /** |
| * pcc_mbox_probe - Called when we find a match for the |
| * PCCT platform device. This is purely used to represent |
| * the PCCT as a virtual device for registering with the |
| * generic Mailbox framework. |
| * |
| * @pdev: Pointer to platform device returned when a match |
| * is found. |
| * |
| * Return: 0 for Success, else errno. |
| */ |
| static int pcc_mbox_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| |
| pcc_mbox_ctrl.chans = pcc_mbox_channels; |
| pcc_mbox_ctrl.ops = &pcc_chan_ops; |
| pcc_mbox_ctrl.txdone_poll = true; |
| pcc_mbox_ctrl.txpoll_period = 10; |
| pcc_mbox_ctrl.dev = &pdev->dev; |
| |
| pr_info("Registering PCC driver as Mailbox controller\n"); |
| ret = mbox_controller_register(&pcc_mbox_ctrl); |
| |
| if (ret) { |
| pr_err("Err registering PCC as Mailbox controller: %d\n", ret); |
| ret = -ENODEV; |
| } |
| |
| return ret; |
| } |
| |
| struct platform_driver pcc_mbox_driver = { |
| .probe = pcc_mbox_probe, |
| .driver = { |
| .name = "PCCT", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pcc_init(void) |
| { |
| int ret; |
| struct platform_device *pcc_pdev; |
| |
| if (acpi_disabled) |
| return -ENODEV; |
| |
| /* Check if PCC support is available. */ |
| ret = acpi_pcc_probe(); |
| |
| if (ret) { |
| pr_debug("ACPI PCC probe failed.\n"); |
| return -ENODEV; |
| } |
| |
| pcc_pdev = platform_create_bundle(&pcc_mbox_driver, |
| pcc_mbox_probe, NULL, 0, NULL, 0); |
| |
| if (IS_ERR(pcc_pdev)) { |
| pr_debug("Err creating PCC platform bundle\n"); |
| return PTR_ERR(pcc_pdev); |
| } |
| |
| return 0; |
| } |
| device_initcall(pcc_init); |