| /* |
| * Low-Level PCI Access for i386 machines. |
| * |
| * (c) 1999 Martin Mares <mj@ucw.cz> |
| */ |
| |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| #define PCI_PROBE_BIOS 0x0001 |
| #define PCI_PROBE_CONF1 0x0002 |
| #define PCI_PROBE_CONF2 0x0004 |
| #define PCI_PROBE_MMCONF 0x0008 |
| #define PCI_PROBE_MASK 0x000f |
| #define PCI_PROBE_NOEARLY 0x0010 |
| |
| #define PCI_NO_CHECKS 0x0400 |
| #define PCI_USE_PIRQ_MASK 0x0800 |
| #define PCI_ASSIGN_ROMS 0x1000 |
| #define PCI_BIOS_IRQ_SCAN 0x2000 |
| #define PCI_ASSIGN_ALL_BUSSES 0x4000 |
| #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 |
| #define PCI_USE__CRS 0x10000 |
| #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 |
| #define PCI_HAS_IO_ECS 0x40000 |
| #define PCI_NOASSIGN_ROMS 0x80000 |
| |
| extern unsigned int pci_probe; |
| extern unsigned long pirq_table_addr; |
| |
| enum pci_bf_sort_state { |
| pci_bf_sort_default, |
| pci_force_nobf, |
| pci_force_bf, |
| pci_dmi_bf, |
| }; |
| |
| /* pci-i386.c */ |
| |
| extern unsigned int pcibios_max_latency; |
| |
| void pcibios_resource_survey(void); |
| |
| /* pci-pc.c */ |
| |
| extern int pcibios_last_bus; |
| extern struct pci_bus *pci_root_bus; |
| extern struct pci_ops pci_root_ops; |
| |
| /* pci-irq.c */ |
| |
| struct irq_info { |
| u8 bus, devfn; /* Bus, device and function */ |
| struct { |
| u8 link; /* IRQ line ID, chipset dependent, |
| 0 = not routed */ |
| u16 bitmap; /* Available IRQs */ |
| } __attribute__((packed)) irq[4]; |
| u8 slot; /* Slot number, 0=onboard */ |
| u8 rfu; |
| } __attribute__((packed)); |
| |
| struct irq_routing_table { |
| u32 signature; /* PIRQ_SIGNATURE should be here */ |
| u16 version; /* PIRQ_VERSION */ |
| u16 size; /* Table size in bytes */ |
| u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ |
| u16 exclusive_irqs; /* IRQs devoted exclusively to |
| PCI usage */ |
| u16 rtr_vendor, rtr_device; /* Vendor and device ID of |
| interrupt router */ |
| u32 miniport_data; /* Crap */ |
| u8 rfu[11]; |
| u8 checksum; /* Modulo 256 checksum must give 0 */ |
| struct irq_info slots[0]; |
| } __attribute__((packed)); |
| |
| extern unsigned int pcibios_irq_mask; |
| |
| extern spinlock_t pci_config_lock; |
| |
| extern int (*pcibios_enable_irq)(struct pci_dev *dev); |
| extern void (*pcibios_disable_irq)(struct pci_dev *dev); |
| |
| struct pci_raw_ops { |
| int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 *val); |
| int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 val); |
| }; |
| |
| extern struct pci_raw_ops *raw_pci_ops; |
| extern struct pci_raw_ops *raw_pci_ext_ops; |
| |
| extern struct pci_raw_ops pci_direct_conf1; |
| extern bool port_cf9_safe; |
| |
| /* arch_initcall level */ |
| extern int pci_direct_probe(void); |
| extern void pci_direct_init(int type); |
| extern void pci_pcbios_init(void); |
| extern int pci_olpc_init(void); |
| extern void __init dmi_check_pciprobe(void); |
| extern void __init dmi_check_skip_isa_align(void); |
| |
| /* some common used subsys_initcalls */ |
| extern int __init pci_acpi_init(void); |
| extern void __init pcibios_irq_init(void); |
| extern int __init pcibios_init(void); |
| extern int pci_legacy_init(void); |
| extern void pcibios_fixup_irqs(void); |
| |
| /* pci-mmconfig.c */ |
| |
| /* "PCI MMCONFIG %04x [bus %02x-%02x]" */ |
| #define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2) |
| |
| struct pci_mmcfg_region { |
| struct list_head list; |
| struct resource res; |
| u64 address; |
| char __iomem *virt; |
| u16 segment; |
| u8 start_bus; |
| u8 end_bus; |
| char name[PCI_MMCFG_RESOURCE_NAME_LEN]; |
| }; |
| |
| extern int __init pci_mmcfg_arch_init(void); |
| extern void __init pci_mmcfg_arch_free(void); |
| extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus); |
| |
| extern struct list_head pci_mmcfg_list; |
| |
| #define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20) |
| |
| /* |
| * AMD Fam10h CPUs are buggy, and cannot access MMIO config space |
| * on their northbrige except through the * %eax register. As such, you MUST |
| * NOT use normal IOMEM accesses, you need to only use the magic mmio-config |
| * accessor functions. |
| * In fact just use pci_config_*, nothing else please. |
| */ |
| static inline unsigned char mmio_config_readb(void __iomem *pos) |
| { |
| u8 val; |
| asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); |
| return val; |
| } |
| |
| static inline unsigned short mmio_config_readw(void __iomem *pos) |
| { |
| u16 val; |
| asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); |
| return val; |
| } |
| |
| static inline unsigned int mmio_config_readl(void __iomem *pos) |
| { |
| u32 val; |
| asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); |
| return val; |
| } |
| |
| static inline void mmio_config_writeb(void __iomem *pos, u8 val) |
| { |
| asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory"); |
| } |
| |
| static inline void mmio_config_writew(void __iomem *pos, u16 val) |
| { |
| asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory"); |
| } |
| |
| static inline void mmio_config_writel(void __iomem *pos, u32 val) |
| { |
| asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory"); |
| } |
| |
| #ifdef CONFIG_PCI |
| # ifdef CONFIG_ACPI |
| # define x86_default_pci_init pci_acpi_init |
| # else |
| # define x86_default_pci_init pci_legacy_init |
| # endif |
| # define x86_default_pci_init_irq pcibios_irq_init |
| # define x86_default_pci_fixup_irqs pcibios_fixup_irqs |
| #else |
| # define x86_default_pci_init NULL |
| # define x86_default_pci_init_irq NULL |
| # define x86_default_pci_fixup_irqs NULL |
| #endif |